--- /dev/null
+;;; feedmail.el --- assist other email packages to massage outgoing messages
+;;; A replacement for parts of GNUemacs' sendmail.el (specifically,
+;;; it's what handles your outgoing mail after you hit C-c C-c in mail
+;;; mode). See below for a list of additional features, including the
+;;; ability to queue messages for later sending. If you are using
+;;; fakemail as a subprocess, you can switch to feedmail and eliminate
+;;; the use of fakemail. feedmail works with recent versions of
+;;; GNUemacs (mostly, but not exclusively, tested against 19.34 on
+;;; Win95; some testing on 20.x) and XEmacs (tested with 20.4 and
+;;; later betas). It probably no longer works with GNUemacs v18,
+;;; though I haven't tried that in a long time. Sorry, no manual yet
+;;; in this release. Look for one with the next release.
+
+;; As far as I'm concerned, anyone can do anything they want with
+;; this specific piece of code. No warranty or promise of support is
+;; offered. This code is hereby released into the public domain.
+
+;; Author: Bill Carpenter <bill@bubblegum.net>, <bill@carpenter.ORG>
+;; Version: 8
+;; Keywords: email, queue, mail, sendmail, message, spray, smtp, draft
+;; Where: <URL:http://www.carpenter.org/feedmail/feedmail.html>
+;; Thanks: My thanks to the many people who have sent me suggestions
+;; and fixes over time, as well as those who have tested many beta
+;; iterations. Some are cited in comments in code fragments below,
+;; but that doesn't correlate well with the list of folks who have
+;; actually helped me along the way.
+
+;;; Commentary:
+;;
+;; If you use feedmail, I invite you to send me some email about it.
+;; I appreciate feedback about problems you find or suggestions for
+;; improvements or added features (even though I can't predict when
+;; I'll incorporate changes). It's also OK with me if you send me a
+;; note along the lines of "I use feedmail and find it useful" or "I
+;; tried feedmail and didn't find it useful, so I stopped using it".
+;;
+;; It is most useful, when sending a bug report, if you tell me what
+;; version of emacs you are using, what version of feedmail you are
+;; using, and what versions of other email-related elisp packages you
+;; are using. If in doubt about any of that, send the bug report
+;; anyhow.
+;;
+;; =====
+;; A NOTE TO THOSE WHO WOULD CHANGE THIS CODE... Since it is PD,
+;; you're within your rights to do whatever you want. If you do
+;; publish a new version with your changes in it, please (1) insert
+;; lisp comments describing the changes, (2) insert lisp comments
+;; that clearly delimit where your changes are, (3) email me a copy
+;; (I can't always consistently follow the relevant usenet groups),
+;; and (4) use a version number that is based on the version you're
+;; changing along with something that indicates you changed it. For
+;; example,
+;;
+;; (defconst feedmail-patch-level "123")
+;; (defconst feedmail-patch-level "123-XYZ-mods")
+;;
+;; The point of the last item, of course, is to try to minimize
+;; confusion. Odds are good that if your idea makes sense to me that
+;; it will show up in some future version of feedmail, though it's
+;; hard to say when releases will tumble out.
+;; =====
+;;
+;; This file requires the mail-utils library.
+;;
+;; This file requires the smtpmail library if you use
+;; feedmail-buffer-to-smtpmail.
+;;
+;; This file requires the custom library. Unfortunately, there are
+;; two incompatible versions of the custom library. If you don't have
+;; custom or you have the old version, this file will still load and
+;; work properly. If you don't know what custom is all about and want
+;; to edit your user option elisp variables the old fashioned way,
+;; just imagine that all the "defcustom" stuff you see below is really
+;; "defvar", and ignore everthing else. For info about custom, see
+;; <URL:http://www.dina.kvl.dk/~abraham/custom/>.
+;;
+;; This code does in elisp a superset of the stuff that used to be done
+;; by the separate program "fakemail" for processing outbound email.
+;; In other words, it takes over after you hit "C-c C-c" in mail mode.
+;; By appropriate setting of options, you can still use "fakemail",
+;; or you can even revert to sendmail (which is not too popular
+;; locally). See the variables at the top of the elisp for how to
+;; achieve these effects (there are more features than in this bullet
+;; list, so trolling through the variable and function doc strings may
+;; be worth your while):
+;;
+;; --- you can park outgoing messages into a disk-based queue and
+;; stimulate sending them all later (handy for laptop users);
+;; there is also a queue for draft messages
+;;
+;; --- you can get one last look at the prepped outbound message and
+;; be prompted for confirmation
+;;
+;; --- removes BCC:/RESENT-BCC: headers after getting address info
+;;
+;; --- does smart filling of address headers
+;;
+;; --- calls a routine to process FCC: lines and removes them
+;;
+;; --- empty headers are removed
+;;
+;; --- can force FROM: or SENDER: line
+;;
+;; --- can generate a MESSAGE-ID: line
+;;
+;; --- can generate a DATE: line; the date can be the time the
+;; message was written or the time it is being sent
+;;
+;; --- strips comments from address info (both "()" and "<>" are
+;; handled via a call to mail-strip-quoted-names); the
+;; comments are stripped in the simplified address list given
+;; to a subprocess, not in the headers in the mail itself
+;; (they are left unchanged, modulo smart filling)
+;;
+;; --- error info is pumped into a normal buffer instead of the
+;; minibuffer
+;;
+;; --- just before the optional prompt for confirmation, lets you
+;; run a hook on the prepped message and simplified address
+;; list
+;;
+;; --- you can specify something other than /bin/mail for the
+;; subprocess
+;;
+;; --- you can generate/modify an X-MAILER: message header
+;;
+;; After a long list of options below, you will find the function
+;; feedmail-send-it. Hers's the best way to use the stuff in this
+;; file:
+;;
+;; Save this file as feedmail.el somewhere on your elisp
+;; loadpath; byte-compile it. Put the following lines somewhere in
+;; your ~/.emacs stuff:
+;;
+;; (setq send-mail-function 'feedmail-send-it)
+;; (autoload 'feedmail-send-it "feedmail")
+;;
+;; If you plan to use the queue stuff, also use this:
+;;
+;; (setq feedmail-enable-queue t)
+;; (autoload 'feedmail-run-the-queue "feedmail")
+;; (autoload 'feedmail-run-the-queue-no-prompts "feedmail")
+;; (setq auto-mode-alist (cons '("\\.fqm$" . mail-mode) auto-mode-alist))
+;;
+;; If you are using the desktop.el library to restore your sessions, you might
+;; like to add the suffix ".fqm" to the list of non-saved things via the variable
+;; desktop-files-not-to-save.
+;;
+;; If you are planning to call feedmail-queue-reminder from your .emacs or
+;; something similar, you might need this:
+;;
+;; (autoload 'feedmail-queue-reminder "feedmail")
+;;
+;; If you ever use rmail-resend and queue messages, you should do this:
+;;
+;; (setq feedmail-queue-alternative-mail-header-separator "")
+;;
+;; If you want to automatically spell-check messages, but not when sending
+;; them from the queue, you could do something like this:
+;;
+;; (autoload 'feedmail-mail-send-hook-splitter "feedmail")
+;; (add-hook 'mail-send-hook 'feedmail-mail-send-hook-splitter)
+;; (add-hook 'feedmail-mail-send-hook 'ispell-message)
+;;
+;; If you are using message-mode to compose and send mail, feedmail will
+;; probably work fine with that (someone else tested it and told me it worked).
+;; Follow the directions above, but make these adjustments instead:
+;;
+;; (setq message-send-mail-function 'feedmail-send-it)
+;; (add-hook 'message-mail-send-hook 'feedmail-mail-send-hook-splitter)
+;;
+;; I think the LCD is no longer being updated, but if it were, this
+;; would be a proper LCD record. There is an old version of
+;; feedmail.el in the LCD archive. It works but is missing a lot of
+;; features.
+;;
+;; LCD record:
+;; feedmail|Bill Carpenter|bill@bubblegum.net,bill@carpenter.ORG|Outbound mail queue handling|98-06-15|8|feedmail.el
+;;
+;; Change log:
+;; original, 31 March 1991
+;; patchlevel 1, 5 April 1991
+;; patchlevel 2, 24 May 1991
+;; 5-may-92 jwz Conditionalized calling expand-mail-aliases, since that
+;; function doesn't exist in Lucid GNU Emacs or when using
+;; mail-abbrevs.el.
+;; patchlevel 3, 3 October 1996
+;; added queue stuff; still works in v18
+;; patchlevel 4, issued by someone else
+;; patchlevel 5, issued by someone else
+;; patchlevel 6, not issued as far as I know
+;; patchlevel 7, 20 May 1997
+;; abandon futile support of GNUemacs v18 (sorry if that hurts you)
+;; provide a DATE: header by default
+;; provide a default for generating MESSAGE-ID: header contents
+;; and use it by default (slightly changed API)
+;; return value from feedmail-run-the-queue
+;; new wrapper function feedmail-run-the-queue-no-prompts
+;; user-mail-address as default for FROM:
+;; properly deal with RESENT-{TO,CC,BCC}
+;; BCC and RESENT-* now included in smart filling
+;; limited support for a "drafts" directory
+;; user-configurable default message action
+;; allow timeout for confirmation prompt (where available)
+;; move FCC handling to as late as possible to get max
+;; header munging in the saved file
+;; work around sendmail.el's prompts when working from queue
+;; more reliably detect voluntary user bailouts
+;; offer to save modified buffers visiting queue files
+;; offer to delete old file copies of messages being queued
+;; offer to delete queue files when sending immediately
+;; queue filename convention preserves queue order
+;; default queue and draft directory names that work on VMS
+;; deduced address list now really a list, not a string (API change)
+;; no more address buffer
+;; when sending immediately, brief reminder of queue/draft counts
+;; copy trace of smtpmail stuff to feedmail error buffer on no-go
+;; more granularity on when to confirm sending
+;; pause a bit for errors while running queue
+;; try to clean up some pesky auto-save files from the
+;; queue/draft directories
+;; feedmail-force-expand-mail-aliases in case you can't figure
+;; any other way
+;; cleanup some of my sloppiness about case-fold-search (a strange
+;; variable)
+;; best effort following coding conventions from GNUemacs
+;; elisp manual appendix
+;; "customize" (see custom.el)
+;; when user selects "immediate send", clear action prompt since
+;; hooks may take a while to operate, and user may think the
+;; response didn't take
+;; fixes to the argument conventions for the
+;; feedmail-queue-runner-* functions; allows
+;; feedmail-run-the-queue[-no-prompts] to properly be called
+;; non-interactively
+;; eliminate reliance on directory-sep-char and feedmail-sep-thing
+;; tweak smart filling (reminded of comma problem by levitte@lp.se)
+;; option to control writing in text vs binary mode
+aqq2;; patchlevel 8, 15 June 1998
+;; reliable re-editing of text-mode (vs binary) queued messages
+;; user option to keep BCC: in FCC: copy (keep by default)
+;; user option to delete body from FCC: copy (keep by default)
+;; feedmail-deduce-bcc-where for envelope (API change for
+;; feedmail-deduce-address list)
+;; feedmail-queue-alternative-mail-header-separator
+;; at message action prompt, "I"/"S" bypass message confirmation prompt
+;; feedmail-mail-send-hook-splitter, feedmail-mail-send-hook,
+;; feedmail-mail-send-hook-queued
+;; user can supply stuff for message action prompt
+;; variable feedmail-queue-runner-confirm-global, function feedmail-run-the-queue-global-prompt
+;; bugfix: absolute argument to directory-files (tracked down for me
+;; by gray@austin.apc.slb.com (Douglas Gray Stephens)); relative
+;; pathnames can tickle stuff in ange-ftp remote directories
+;; (perhaps because feedmail is careless about its working
+;; directory)
+;; feedmail-deduce-envelope-from
+;; always supply envelope "from" (user-mail-address) to sendmail
+;; feedmail-message-id-suffix
+;; feedmail-queue-reminder, feedmail-queue-reminder-alist (after suggestions
+;; and/or code fragments from tonyl@Eng.Sun.COM (Tony Lam) and
+;; burge@newvision.com (Shane Burgess); bumped up the default value of
+;; feedmail-queue-chatty-sit-for since info is more complex sometimes
+;; feedmail-enable-spray (individual transmissions, crude mailmerge)
+;; blank SUBJECT: no longer a special case; see feedmail-nuke-empty-headers
+;; fiddle-plexes data structure used lots of places; see feedmail-fiddle-plex-blurb
+;; feedmail-fiddle-plex-user-list
+;; feedmail-is-a-resend
+;; honor mail-from-style in constructing default for feedmail-from-line
+;; re-implement feedmail-from-line and feedmail-sender-line with
+;; fiddle-plexes; slightly modified semantics for feedmail-sender-line
+;; feedmail-queue-default-file-slug; tidy up some other slug details
+;; feedmail-queue-auto-file-nuke
+;; feedmail-queue-express-to-queue and feedmail-queue-express-to-draft
+;; strong versions of "q"ueue and "d"raft answers (always make a new file)
+;;
+;; todo (probably in patchlevel 9):
+;; write texinfo manual
+;; maybe partition into multiple files, including files of examples
+;;
+;;; Code:
+
+(defconst feedmail-patch-level "8")
+
+
+;; from <URL:http://www.dina.kvl.dk/~abraham/custom/>:
+;; If you write software that must work without the new custom, you
+;; can use this hack stolen from w3-cus.el:
+(eval-and-compile
+ (condition-case ()
+ (require 'custom)
+ (error nil))
+ (if (and (featurep 'custom) (fboundp 'custom-declare-variable))
+ nil ;; We've got what we needed
+ ;; We have the old custom-library, hack around it!
+ (defmacro defgroup (&rest args)
+ nil)
+ (defmacro defcustom (var value doc &rest args)
+ (` (defvar (, var) (, value) (, doc))))))
+
+
+(defgroup feedmail nil
+ "Assist other email packages to massage outgoing messages."
+ :group 'mail)
+
+(defgroup feedmail-misc nil
+ "Miscellaneous feedmail options that don't fit in other groups."
+ :group 'feedmail)
+
+(defgroup feedmail-headers nil
+ "Options related to manipulating specific headers or types of headers."
+ :group 'feedmail)
+
+(defgroup feedmail-queue nil
+ "Options related to queuing messages for later sending."
+ :group 'feedmail)
+
+
+(defcustom feedmail-confirm-outgoing nil
+ "*If non-nil, give a y-or-n confirmation prompt before sending mail.
+This is done after the message is completely prepped, and you'll be
+looking at the top of the message in a buffer when you get the prompt.
+If set to the symbol 'queued, give the confirmation prompt only while
+running the queue (however, the prompt is always suppressed if you are
+processing the queue via feedmail-run-the-queue-no-prompts). If set
+to the symbol 'immediate, give the confirmation prompt only when
+sending immediately. For any other non-nil value, prompt in both
+cases. You can give a timeout for the prompt; see variable
+feedmail-confirm-outgoing-timeout."
+ :group 'feedmail-misc
+ :type 'boolean
+ )
+
+
+(defcustom feedmail-confirm-outgoing-timeout nil
+ "*If non-nil, a timeout in seconds at the send confirmation prompt.
+If a positive number, it's a timeout before sending. If a negative
+number, it's a timeout before not sending. This will not work if your
+version of emacs doesn't include the function y-or-n-p-with-timeout
+(e.g., some versions of XEmacs)."
+ :group 'feedmail-misc
+ :type '(choice (const nil) integer)
+)
+
+
+(defcustom feedmail-nuke-bcc t
+ "*If non-nil remove BCC: lines from the message headers.
+In any case, the BCC: lines do participate in the composed address
+list. You may want to leave them in if you're using sendmail
+(see feedmail-buffer-eating-function)."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-nuke-resent-bcc t
+ "*If non-nil remove RESENT-BCC: lines from the message headers.
+In any case, the RESENT-BCC: lines do participate in the composed
+address list. You may want to leave them in if you're using sendmail
+(see feedmail-buffer-eating-function)."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-deduce-bcc-where nil
+ "*Where should BCC:/RESENT-BCC: addresses appear in the envelope list?
+Addresses for the message envelope are deduced by examining
+appropriate address headers in the message. Generally, they will show
+up in the list of deduced addresses in the order that the headers
+happen to appear (duplicate addresses are eliminated in any case).
+This variable can be set to the symbol 'first, in which case the
+BCC:/RESENT-BCC: addresses will appear at the beginning in the list;
+or, it can be set to the symbol 'last, in which case they will appear
+at the end of the list.
+
+Why should you care? Well, maybe you don't, and certainly the same
+things could be accomplished by affecting the order of message headers
+in the outgoing message. Some people use BCC: as a way of getting
+their own \"come back\" copy of each message they send. If BCC:
+addresses are not handled first, there can be substantial delays in
+seeing the message again. Some configurations of sendmail, for example,
+seem to try to deliver to each addressee at least once, immediately
+and serially, so slow SMTP conversations can add up to a delay. There
+is an option for either 'first or 'last because you might have a
+delivery agent that processes the addresses backwards."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-fill-to-cc t
+ "*If non-nil do smart filling of addressee header lines.
+Smart filling means breaking long lines at appropriate points and
+making continuation lines. Despite the function name, it includes
+TO:, CC:, BCC: (and their RESENT-* forms), as well as FROM: and
+REPLY-TO: (though they seldom need it). If nil, the lines are left
+as-is. The filling is done after mail address alias expansion."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-fill-to-cc-fill-column default-fill-column
+ "*Fill column used by feedmail-fill-to-cc."
+ :group 'feedmail-headers
+ :type 'integer
+)
+
+
+(defcustom feedmail-nuke-bcc-in-fcc nil
+ "*If non-nil remove [RESENT-]BCC: lines in message copies saved via FCC:.
+This is independent of whether the BCC: header lines are actually sent
+with the message (see feedmail-nuke-bcc). Though not implied in the name,
+the same FCC: treatment applies to both BCC: and RESENT-BCC: lines."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-nuke-body-in-fcc nil
+ "*If non-nil remove body of message in copies saved via FCC:.
+If an positive integer value, leave (up to) that many lines of the
+beginning of the body intact. The result is that the FCC: copy will
+consist only of the message headers, serving as a sort of an outgoing
+message log."
+ :group 'feedmail-headers
+ :type '(choice (const nil) (const t) integer)
+;; :type 'boolean
+)
+
+
+(defcustom feedmail-force-expand-mail-aliases nil
+ "*If non-nil force the calling of expand-mail-aliases.
+Normally, feedmail tries to figure out if you're using mailalias or
+mailabbrevs and only calls expand-mail-aliases if it thinks you're
+using the mailalias package. This user option can be used to force
+the issue since there are configurations which fool the figuring
+out."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-nuke-empty-headers t
+ "*If non-nil, remove header lines which have no contents.
+A completely empty SUBJECT: header is always removed, regardless of
+the setting of this variable. The only time you would want them left
+in would be if you used some headers whose presence indicated
+something rather than their contents. This is rare in Internet email
+but common in some proprietary systems."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+;; wjc sez: I think the use of the SENDER: line is pretty pointless,
+;; but I left it in to be compatible with sendmail.el and because
+;; maybe some distant mail system needs it. Really, though, if you
+;; want a sender line in your mail, just put one in there and don't
+;; wait for feedmail to do it for you. (Yes, I know all about
+;; RFC-822 and RFC-1123, but are you *really* one of those cases
+;; they're talking about? I doubt it.)
+(defcustom feedmail-sender-line nil
+ "*If non-nil and the email has no SENDER: header, use this value.
+May be nil, in which case nothing in particular is done with respect
+to SENDER: lines. By design, will not replace an existing SENDER:
+line, but you can achieve that with a fiddle-plex 'replace action.
+NB: it makes no sense to use the value t since there is no sensible
+default for SENDER:.
+
+If not nil, it may be a string, a fiddle-plex, or a function which
+returns either nil, t, a string, or a fiddle-plex (or, in fact,
+another function, but let's not be ridiculous). If a string, it
+should be just the contents of the header, not the name of the header
+itself nor the trailing newline. If a function, it will be called
+with no arguments. For an explanation of fiddle-plexes, see the
+documentation for the variable feedmail-fiddle-plex-blurb. In all
+cases the name element of the fiddle-plex is ignored and is hardwired
+by feedmail to either \"X-Sender\" or \"X-Resent-Sender\".
+
+You can probably leave this nil, but if you feel like using it, a good
+value would be a string of a fully-qualified domain name form of your
+address. For example, \"bill@bubblegum.net (WJCarpenter)\". The SENDER:
+header is fiddled after the FROM: header is fiddled."
+ :group 'feedmail-headers
+ :type '(choice (const nil) string)
+)
+
+
+(defcustom feedmail-force-binary-write t
+ "*If non-nil, force writing file as binary. Applies to queues and FCC:.
+On systems where there is a difference between binary and text files,
+feedmail will temporarily manipulate the values of buffer-file-type
+and/or default-buffer-file-type to make the writing as binary. If
+nil, writing will be in text mode. On systems where there is no
+distinction or where it is controlled by other variables or other
+means, this option has no effect."
+ :group 'feedmail-misc
+ :type 'boolean
+)
+
+
+(defcustom feedmail-from-line t
+ "*If non-nil and the email has no FROM: header, use this value.
+May be t, in which case a default is computed (and you probably won't
+be happy with it). May be nil, in which case nothing in particular is
+done with respect to FROM: lines. By design, will not replace an
+existing FROM: line, but you can achieve that with a fiddle-plex 'replace
+action.
+
+If neither nil nor t, it may be a string, a fiddle-plex, or a function
+which returns either nil, t, a string, or a fiddle-plex (or, in fact,
+another function, but let's not be ridiculous). If a string, it
+should be just the contents of the header, not the name of the header
+itself nor the trailing newline. If a function, it will be called
+with no arguments. For an explanation of fiddle-plexes, see the
+documentation for the variable feedmail-fiddle-plex-blurb. In all
+cases the name element of the fiddle-plex is ignored and is hardwired
+by feedmail to either \"X-From\" or \"X-Resent-From\".
+
+A good value would be a string fully-qualified domain name form of
+your address. For example, \"bill@bubblegum.net (WJCarpenter)\". The
+default value of this variable uses the standard elisp variable
+user-mail-address which should be set on every system but has a decent
+chance of being wrong. It also honors mail-from-style. Better to set
+this variable explicitly to the string you want or find some other way
+to arrange for the message to get a FROM: line."
+ :group 'feedmail-headers
+ :type '(choice (const nil) string)
+)
+
+
+(defcustom feedmail-deduce-envelope-from t
+ "*If non-nil, deduce message envelope \"from\" from header FROM: or SENDER:.
+In other words, if there is a SENDER: header in the message, temporarily
+change the value of user-mail-address to be the same while the message
+is being sent. If there is no SENDER: header, use the FROM: header,
+if any. Address values are taken from the actual message just before
+it is sent, and the process is independent of the values of
+feedmail-from-line and/or feedmail-sender-line.
+
+There are many and good reasons for having the message header
+FROM:/SENDER: be different from the message envelope \"from\"
+information. However, for most people and for most circumstances, it
+is usual for them to be the same (this is probably especially true for
+the case where the user doesn't understand the difference between the
+two in the first place).
+
+The idea behind this feature is that you can have everything set up
+some normal way for yourself. If for some reason you want to send a
+message with another FROM: line, you can just type it at the top of
+the message, and feedmail will take care of \"fixing up\" the envelope
+\"from\". This only works for mail senders which make use of
+user-mail-address as the envelope \"from\" value. For some mail
+senders (e.g., feedmail-buffer-to-bin-mail), there is no simple way to
+influence what they will use as the envelope."
+ :group 'feedmail-headers
+ :type 'boolean
+)
+
+
+(defcustom feedmail-x-mailer-line-user-appendage nil
+ "*See feedmail-x-mailer-line."
+ :group 'feedmail-headers
+ :type '(choice (const nil) string)
+)
+
+
+(defcustom feedmail-x-mailer-line t
+ "*Control the form of an X-MAILER: header in an outgoing message.
+Moderately useful for debugging, keeping track of your correspondents'
+mailer preferences, or just wearing your MUA on your sleeve. You
+should probably know that some people are fairly emotional about the
+presence of X-MAILER: lines in email.
+
+If nil, nothing is done about X-MAILER:.
+
+If t, an X-MAILER: header of a predetermined format is produced,
+combining its efforts with any existing X-MAILER: header. If you want
+to take the default construct and just add a little blob of your own
+at the end, define the variable feedmail-x-mailer-line-user-appendage
+as that blob string. A value of t is equivalent to using the function
+feedmail-default-x-mailer-generator.
+
+If neither nil nor t, it may be a string, a fiddle-plex, or a function
+which returns either nil, t, a string, or a fiddle-plex (or, in fact,
+another function, but let's not be ridiculous). If a string, it
+should be just the contents of the header, not the name of the header
+itself nor the trailing newline. If a function, it will be called
+with no arguments. For an explanation of fiddle-plexes, see the
+documentation for the variable feedmail-fiddle-plex-blurb. In all
+cases the name element of the fiddle-plex is ignored and is hardwired
+by feedmail to either \"X-Mailer\" or \"X-Resent-Mailer\"."
+ :group 'feedmail-headers
+ :type '(choice (const t) (const nil) string function)
+)
+
+
+(defcustom feedmail-message-id-generator t
+ "*Specifies the creation of a MESSAGE-ID: header field.
+
+If nil, nothing is done about MESSAGE-ID:.
+
+If t, a MESSAGE-ID: header of a predetermined format is produced, but
+only if there is not already a MESSAGE-ID: in the message. A value of
+t is equivalent to using the function feedmail-default-message-id-generator.
+
+If neither nil nor t, it may be a string, a fiddle-plex, or a function
+which returns either nil, t, a string, or a fiddle-plex (or, in fact,
+another function, but let's not be ridiculous). If a string, it
+should be just the contents of the header, not the name of the header
+itself nor the trailing newline. If a function, it will be called
+with one argument: the possibly-nil name of the file associated with
+the message buffer. For an explanation of fiddle-plexes, see the
+documentation for the variable feedmail-fiddle-plex-blurb. In all
+cases the name element of the fiddle-plex is ignored and is hardwired
+by feedmail to either \"Message-ID\" or \"Resent-Message-ID\".
+
+You should let feedmail generate a MESSAGE-ID: for you unless you are sure
+that whatever you give your messages to will do it for you (e.g., most
+configurations of sendmail). Even if the latter case is true, it
+probably won't hurt you to generate your own, and it will then show up
+in the saved message if you use FCC:."
+ :group 'feedmail-headers
+ :type '(choice (const nil) function)
+)
+
+
+(defcustom feedmail-message-id-suffix nil
+ "*If non-nil, used as a suffix in generated MESSAGE-ID: headers for uniqueness.
+The function feedmail-default-message-id-generator creates its work based
+on a formatted date-time string, a random number, and a domain-looking suffix.
+You can control the suffix used by assigning a string value to this variable. If
+you don't supply one, the value of the variable user-mail-address will be used.
+If the value of feedmail-message-id-suffix contains an \"@\" character, the string
+will be used verbatim, else an \"@\" character will be prepended automatically."
+ :group 'feedmail-headers
+ :type 'string
+)
+
+;; this was suggested in various forms by several people; first was
+;; Tony DeSimone in Oct 1992; sorry to be so tardy
+(defcustom feedmail-date-generator t
+ "*Specifies the creation of a DATE: header field.
+
+If nil, nothing is done about DATE:.
+
+If t, a DATE: header of a predetermined format is produced, but only
+if there is not already a DATE: in the message. A value of t is
+equivalent to using the function feedmail-default-date-generator.
+
+If neither nil nor t, it may be a string, a fiddle-plex, or a function
+which returns either nil, t, a string, or a fiddle-plex (or, in fact,
+another function, but let's not be ridiculous). If a string, it
+should be just the contents of the header, not the name of the header
+itself nor the trailing newline. If a function, it will be called
+with one argument: the possibly-nil name of the file associated with
+the message buffer. For an explanation of fiddle-plexes, see the
+documentation for the variable feedmail-fiddle-plex-blurb. In all
+cases the name element of the fiddle-plex is ignored and is hardwired
+by feedmail to either \"Date\" or \"Resent-Date\".
+
+If you decide to format your own date field, do us all a favor and know
+what you're doing. Study the relevant parts of RFC-822 and RFC-1123.
+Don't make me come up there!
+
+You should let feedmail generate a DATE: for you unless you are sure
+that whatever you give your messages to will do it for you (e.g., most
+configurations of sendmail). Even if the latter case is true, it
+probably won't hurt you to generate your own, and it will then show up
+in the saved message if you use FCC:."
+ :group 'feedmail-headers
+ :type '(choice (const nil) function)
+)
+
+
+(defcustom feedmail-fiddle-headers-upwardly t
+ "*Non-nil means fiddled header fields should be inserted at the top of the header.
+Nil means insert them at the bottom. This is mostly a novelty issue since
+the standards define the ordering of header fields to be immaterial and it's
+fairly likely that some MTA along the way will have its own idea of what the
+order should be, regardless of what you specify."
+ :group 'feedmail-header
+ :type 'boolean
+ )
+
+
+(defcustom feedmail-fiddle-plex-user-list nil
+ "If non-nil, should be a list of one or more fiddle-plexes.
+Each element of the list can also be a function which returns a
+fiddle-plex.
+
+feedmail will use this list of fiddle-plexes to manipulate user-specified
+message header fields. It does this after it has completed all normal
+message header field manipulation and before calling feedmail-last-chance-hook.
+
+For an explanation of fiddle-plexes, see the documentation for the
+variable feedmail-fiddle-plex-blurb. In contrast to some other fiddle-plex
+manipulation functions, in this context, it makes no sense to have an element
+which is nil, t, or a simple string."
+ :group 'feedmail-header
+ :type 'list
+ )
+
+
+(defcustom feedmail-enable-spray nil
+ "If non-nil, transmit message separately to each addressee.
+feedmail normally accumulates a list of addressees and passes the message
+along with that list to a buffer-eating function which expects any number
+of addressees. If this variable is non-nil, however, feedmail will
+repeatedly call the same buffer-eating function. Each time, the list of
+addressees will be just one item from the original list. This only affects
+the message envelope addresses and doesn't affect what appears in the
+message headers except as noted.
+
+Spray mode is usually pointless, and if you can't think of a good reason for
+it, you should avoid it since it is inherently less efficient than normal
+multiple delivery. One reason to use it is to overcome mis-featured mail
+transports which betray your trust by revealing BCC: addressees in the
+headers of a message. Another use is to do a crude form of mailmerge, for
+which see feedmail-spray-address-fiddle-plex-list.
+
+If one of the calls to the buffer-eating function results in an error,
+what happens next is carelessly defined, so beware."
+ :group 'feedmail-spray
+ :type 'boolean
+ )
+
+(defvar feedmail-spray-this-address nil
+ "Do not set or change this variable. See feedmail-spray-address-fiddle-plex-list.")
+
+(defcustom feedmail-spray-address-fiddle-plex-list nil
+ "User-supplied specification for a crude form of mailmerge capability.
+When spraying is enabled, feedmail composes a list of envelope addresses.
+In turn, feedmail-spray-this-address is temporarily set to each address
+(stripped of any comments and angle brackets) and calls a function which
+fiddles message headers according to this variable. For an overview of
+fiddle-plex data structures, see the documentation for feedmail-fiddle-plex-blurb.
+
+May be nil, in which case nothing in particular is done about message
+headers for specific addresses.
+
+May be t, in which case a \"TO:\" header is added to the message with
+the stripped address as the header contents. The fiddle-plex operator
+is 'supplement.
+
+May be a string, in which case the string is assumed to be the name of
+a message header field with the stripped address serving as the value.
+The fiddle-plex operator is 'supplement.
+
+May be a function, in which case it is called with no arguments and is
+expected to return nil, t, a string, another function, or a fiddle-plex.
+The result is used recursively.
+
+May be a list of any combination of the foregoing and fiddle-plexes. (A
+value for this variable which consists of a single fiddle-plex must be
+nested inside another list to avoid ambiguity.) If a list, each item
+is acted on in turn as described above.
+
+For example,
+
+ (setq feedmail-spray-address-fiddle-plex-list 'my-address-embellisher)
+
+The idea of the example is that, during spray mode, as each message is
+about to be transmitted to an individual address, the function will be
+called and will consult feedmail-spray-this-address to find the
+stripped envelope email address (no comments or angle brackets). The
+function should return an embellished form of the address.
+
+The recipe for sending form letters is: (1) create a message with all
+addressees on BCC: headers; (2) tell feedmail to remove BCC: headers
+before sending the message; (3) create a function which will embellish
+stripped addresses, if desired; (4) define feedmail-spray-address-fiddle-plex-list
+appropriately; (5) send the message with feedmail-enable-spray set
+non-nil; (6) stand back and watch co-workers wonder at how efficient
+you are at accomplishing inherently inefficient things."
+ :group 'feedmail-spray
+ :type 'list
+ )
+
+
+(defcustom feedmail-enable-queue nil
+ "*If non-nil, provide for stashing outgoing messages in a queue.
+This is the master on/off switch for feedmail message queuing.
+Queuing is quite handy for laptop-based users. It's also handy if you
+get a lot of mail and process it more or less sequentially. For
+example, you might change your mind about contents of a reply based on
+a message you see a bit later.
+
+There is a separate queue for draft messages, intended to prevent
+you from accidentally sending incomplete messages. The queues are
+disk-based and intended for later transmission. The messages are
+queued in their raw state as they appear in the mail-mode buffer and
+can be arbitrarily edited later, before sending, by visiting the
+appropriate file in the queue directory (and setting the buffer to
+mail-mode or whatever). If you visit a file in the queue directory
+and try to queue it again, it will just get saved in its existing file
+name. You can move a message from the draft to the main queue or vice
+versa by pretending to send it and then selecting whichever queue
+directory you want at the prompt. The right thing will happen.
+
+To transmit all the messages in the queue, invoke the command
+feedmail-run-the-queue or feedmail-run-the-queue-no-prompts."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-queue-runner-confirm-global nil
+ "*If non-nil, give a y-or-n confirmation prompt before running the queue.
+Prompt even if the queue is about to be processed as a result of a call to
+feedmail-run-the-queue-no-prompts. This gives you a way to bail out
+without having to answer no to the individual message prompts."
+ :group 'feedmail-queue
+ :type 'boolean)
+
+
+;; I provided a default for VMS because someone asked for it (the
+;; normal default doesn't work there), but, puh-lease!, it is a user
+;; definable option, so if you don't like the default, change it to
+;; whatever you want. I am unable to directly test the VMS goop
+;; provided here by levitte@lp.se (Richard Levitte - VMS Whacker).
+(defcustom feedmail-queue-directory
+ (if (memq system-type '(axp-vms vax-vms))
+ (expand-file-name (concat (getenv "HOME") "[.MAIL.Q]"))
+ (concat (getenv "HOME") "/mail/q"))
+ "*Name of a directory where messages will be queued.
+Directory will be created if necessary. Should be a string that
+doesn't end with a slash. Default, except on VMS, is \"$HOME/mail/q\"."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-queue-draft-directory
+ (if (memq system-type '(axp-vms vax-vms))
+ (expand-file-name (concat (getenv "HOME") "[.MAIL.DRAFT]"))
+ (concat (getenv "HOME") "/mail/draft"))
+ "*Name of an directory where DRAFT messages will be queued.
+Directory will be created if necessary. Should be a string that
+doesn't end with a slash. Default, except on VMS, is \"$HOME/mail/draft\"."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-ask-before-queue t
+ "*If non-nil, feedmail will ask what you want to do with the message.
+Default choices for the message action prompt will include sending it
+immediately, putting it in the main queue, putting it in the draft
+queue, or returning to the buffer to continue editing. Only matters if
+queuing is enabled. If nil, the message is placed in the main queue
+without a prompt."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-ask-before-queue-prompt "FQM: Message action (q, i, d, e, ?)? [%s]: "
+ "*A string which will be used for the message action prompt.
+If it contains a \"%s\", that will be replaced with the value of
+feedmail-ask-before-queue-default."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-ask-before-queue-reprompt "FQM: Please type q, i, d, or e; or ? for help [%s]: "
+ "*A string which will be used for repompting after invalid input.
+If it contains a \"%s\", that will be replaced with the value of
+feedmail-ask-before-queue-default."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-ask-before-queue-default "queue"
+ "*Meaning if user hits return in response to the message action prompt.
+Should be a character or a string; if a string, only the first
+character is significant. Useful values are those described in
+the help for the message action prompt."
+ :group 'feedmail-queue
+ :type '(choice string integer) ;use integer to get char
+)
+
+
+(defvar feedmail-prompt-before-queue-standard-alist
+ '((?q . feedmail-message-action-queue)
+ (?Q . feedmail-message-action-queue-strong)
+
+ (?d . feedmail-message-action-draft)
+ (?r . feedmail-message-action-draft)
+ (?D . feedmail-message-action-draft-strong)
+ (?R . feedmail-message-action-draft-strong)
+
+ (?e . feedmail-message-action-edit)
+ (?E . feedmail-message-action-edit)
+ (?\C-g . feedmail-message-action-edit)
+ (?n . feedmail-message-action-edit)
+ (?N . feedmail-message-action-edit)
+
+ (?i . feedmail-message-action-send)
+ (?I . feedmail-message-action-send-strong)
+ (?s . feedmail-message-action-send)
+ (?S . feedmail-message-action-send-strong)
+
+ (?* . feedmail-message-action-toggle-spray)
+
+ (?\C-v . feedmail-message-action-help)
+ (?? . feedmail-message-action-help))
+ "An alist of choices for the message action prompt.
+All of the values are function names, except help, which is a special
+symbol that calls up help for the prompt (the help describes the
+actions from the standard alist). To customize your own choices,
+define a similar alist called feedmail-prompt-before-queue-user-alist.
+The actual alist used for message action will be the standard alist
+overlaid with the user-alist. To neutralize an item in the standard
+alist without providing a replacement, define an appropriate element
+in the user alist with a value of nil." )
+
+
+(defcustom feedmail-prompt-before-queue-user-alist nil
+ "See feedmail-prompt-before-queue-standard-alist."
+ :group 'feedmail-queue
+ :type 'alist
+ )
+
+
+(defcustom feedmail-prompt-before-queue-help-supplement nil
+ "User-provided supplementary help string for the message action prompt.
+When the message action prompt is shown, the user can as for verbose help,
+at which point a buffer pops up describing the meaning of possible
+responses to the prompt. Through various customizations (see, for
+example, feedmail-prompt-before-queue-user-alist), the available responses
+and the prompt itself can be changed. If this variable is set to a string
+value, that string is written to the help buffer after the standard info.
+It may contain embedded line breaks. It will be printed via princ."
+ :group 'feedmail-queue
+ :type 'string
+ )
+
+
+(defcustom feedmail-queue-reminder-alist
+ '((after-immediate . feedmail-queue-reminder-brief)
+ (after-queue . feedmail-queue-reminder-medium)
+ (after-draft . feedmail-queue-reminder-medium)
+ (after-run . feedmail-queue-reminder-brief)
+ (on-demand . feedmail-run-the-queue-global-prompt))
+ "See feedmail-queue-reminder."
+ :group 'feedmail-queue
+ :type 'alist
+ )
+
+
+(defcustom feedmail-queue-chatty t
+ "*If non-nil, blat a few status messages and such in the mini-buffer.
+If nil, just do the work and don't pester people about what's going on.
+In some cases, though, specific options inspire mini-buffer prompting.
+That's not affected by this variable setting. Also does not control
+reporting of error/abnormal conditions."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-queue-chatty-sit-for 2
+ "*Duration of pause after most queue-related messages.
+After some messages are divulged, it is prudent to pause before
+something else obliterates them. This value controls the duration of
+the pause."
+ :group 'feedmail-queue
+ :type 'integer
+)
+
+
+(defcustom feedmail-queue-run-orderer nil
+ "*If non-nil, name a function which will sort the queued messages.
+The function is called during a running of the queue for sending, and
+takes one argument, a list of the files in the queue directory. It
+may contain the names of non-message files, and it's okay to leave
+them in the list when reordering it; they get skipped over later.
+When nil, the default action processes the messages in normal sort
+order by queued file name, which will typically result in the order
+they were placed in the queue."
+ :group 'feedmail-queue
+ :type '(choice (const nil) function)
+)
+
+
+(defcustom feedmail-queue-use-send-time-for-date nil
+ "*If non-nil, use send time for the DATE: header value.
+This variable is used by the default date generating function,
+feedmail-default-date-generator. If nil, the default, the
+last-modified timestamp of the queue file is used to create the
+message DATE: header; if there is no queue file, the current time is
+used."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-queue-use-send-time-for-message-id nil
+ "*If non-nil, use send time for the MESSAGE-ID: header value.
+This variable is used by the default MESSAGE-ID: generating function,
+feedmail-default-message-id-generator. If nil, the default, the
+last-modified timestamp of the queue file is used to create the
+message MESSAGE-ID: header; if there is no queue file, the current time is
+used."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-ask-for-queue-slug nil
+ "*If non-nil, prompt user for part of the queue file name.
+The file will automatically get the FQM suffix and an embedded
+sequence number for uniqueness, so don't specify that. feedmail will
+get rid of all characters other than alphanumeric and hyphen in the
+results. If this variable is nil or if you just hit return in
+response to the prompt, feedmail queuing will take care of things
+properly. At the prompt, completion is available if you want to see
+what filenames are already in use, though, as noted, you will not be
+typing a complete file name. You probably don't want to be bothered
+with this prompting since feedmail, by default, uses queue file names
+based on the subjects of the messages."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-queue-slug-maker 'feedmail-queue-subject-slug-maker
+ "*If non-nil, a function which creates part of the queued file name.
+Takes a single argument giving the name of the directory into
+which the message will be queued. The returned string should be just
+the non-directory filename part, without FQM suffix or uniquifying
+sequence numbers. The current buffer holds the raw message. The
+default function creates the slug based on the message subject, if
+any."
+ :group 'feedmail-queue
+ :type '(choice (const nil) function)
+)
+
+
+(defcustom feedmail-queue-default-file-slug t
+ "*Indicates what to use for subject-less messages when forming a file name.
+When feedmail queues a message, it creates a unique file name. By default,
+the file name is based in part on the subject of the message being queued.
+If there is no subject, consult this variable. See documentation for the
+function feedmail-queue-subject-slug-maker.
+
+If t, an innocuous default is used.
+
+If a string, it is used directly.
+
+If a function, it is called with no arguments from the buffer containing the raw
+text of the message. It must return a string (which may be empty).
+
+If the symbol 'ask, you will be prompted for a string in the mini-buffer.
+Filename completion is available so that you can inspect what's already been
+used, but feedmail will do further manipulation on the string you return, so
+it's not expected to be a complete filename."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-queue-fqm-suffix ".fqm"
+ "*The FQM suffix used to distinguish feedmail queued message files.
+You probably want this to be a period followed by some letters and/or
+digits. The distinction is to be able to tell them from other random
+files that happen to be in the feedmail-queue-directory or
+feedmail-queue-draft-directory. By the way, FQM stands for feedmail
+queued message."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-nuke-buffer-after-queue nil
+ "*If non-nil, silently kill the buffer after a message is queued.
+You might like that since a side-effect of queueing the message is
+that its buffer name gets changed to the filename. That means that
+the buffer won't be reused for the next message you compose. If you
+are using VM for creating messages, you probably want to leave this
+nil, since VM has its own options for managing the recycling of
+message buffers."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+(defcustom feedmail-queue-auto-file-nuke nil
+ "*If non-nil, automatically delete queue files when a message is sent.
+Normally, feedmail will notice such files when you send a message in
+immediate mode (i.e., not when you're running the queue) and will ask if
+you want to delete them. Since the answer is usually yes, setting this
+variable to non-nil will tell feedmail to skip the prompt and just delete
+the file without bothering you."
+ :group 'feedmail-queue
+ :type 'boolean
+)
+
+
+;; defvars to make byte-compiler happy(er)
+(defvar feedmail-error-buffer nil "not a user option variable")
+(defvar feedmail-prepped-text-buffer nil "not a user option variable")
+(defvar feedmail-raw-text-buffer nil "not a user option variable")
+(defvar feedmail-address-list nil "not a user option variable")
+
+
+(defun feedmail-mail-send-hook-splitter ()
+ "Facilitate dividing mail-send-hook things into queued and immediate cases.
+If you have mail-send-hook functions that should only be called for sending/
+queueing messages or only be called for the sending of queued messages, this is
+for you. Add this function to mail-send-hook with something like this:
+
+ (add-hook 'mail-send-hook 'feedmail-mail-send-hook-splitter)
+
+Then add the functions you want called to either feedmail-mail-send-hook-queued
+or feedmail-mail-send-hook, as apprpriate. The distinction is that
+feedmail-mail-send-hook will be called when you send mail from a composition
+buffer (typically by typing C-c C-c), whether the message is sent immediately
+or placed in the queue or drafts directory. feedmail-mail-send-hook-queued is
+called when messages are being sent from the queue directory, typically via a
+call to feedmail-run-the-queue."
+ (if feedmail-queue-runner-is-active
+ (run-hooks 'feedmail-mail-send-hook-queued)
+ (run-hooks 'feedmail-mail-send-hook))
+)
+
+
+(defvar feedmail-mail-send-hook nil
+ "*See documentation for feedmail-mail-send-hook-splitter.")
+
+
+(defvar feedmail-mail-send-hook-queued nil
+ "*See documentation for feedmail-mail-send-hook-splitter.")
+
+
+(defun feedmail-confirm-addresses-hook-example ()
+ "An example of a feedmail-last-chance-hook.
+It shows the simple addresses and gets a confirmation. Use as:
+ (setq feedmail-last-chance-hook 'feedmail-confirm-addresses-hook-example)."
+ (save-window-excursion
+ (display-buffer (set-buffer (get-buffer-create " F-C-A-H-E")))
+ (erase-buffer)
+ (insert (mapconcat 'identity feedmail-address-list " "))
+ (if (not (y-or-n-p "How do you like them apples? "))
+ (error "FQM: Sending...gave up in last chance hook")
+ )))
+
+
+(defcustom feedmail-last-chance-hook nil
+ "*User's last opportunity to modify the message on its way out.
+It has already had all the header prepping from the standard package.
+The next step after running the hook will be to push the buffer into a
+subprocess that mails the mail. The hook might be interested in
+these: (1) feedmail-prepped-text-buffer contains the header and body
+of the message, ready to go; (2) feedmail-address-list contains a list
+of simplified recipients of addresses which are to be given to the
+subprocess (the hook may change the list); (3) feedmail-error-buffer
+is an empty buffer intended to soak up errors for display to the user.
+If the hook allows interactive activity, the user should not send more
+mail while in the hook since some of the internal buffers will be
+reused and things will get confused."
+ :group 'feedmail-misc
+ :type 'hook
+)
+
+
+(defcustom feedmail-before-fcc-hook nil
+ "*User's last opportunity to modify the message before FCC action.
+It has already had all the header prepping from the standard package.
+The next step after running the hook will be to save the message via
+FCC: processing. The hook might be interested in these: (1)
+feedmail-prepped-text-buffer contains the header and body of the
+message, ready to go; (2) feedmail-address-list contains a list of
+simplified recipients of addressees to whom the message was sent (3)
+feedmail-error-buffer is an empty buffer intended to soak up errors
+for display to the user. If the hook allows interactive activity, the
+user should not send more mail while in the hook since some of the
+internal buffers will be reused and things will get confused."
+ :group 'feedmail-misc
+ :type 'hook
+)
+
+(defcustom feedmail-queue-runner-mode-setter
+ '(lambda (&optional arg) (mail-mode))
+ "*A function to set the proper mode of a message file. Called when
+the message is read back out of the queue directory with a single
+argument, the optional argument used in the call to
+feedmail-run-the-queue or feedmail-run-the-queue-no-prompts.
+
+Most people want mail-mode, so the default value is an anonymous
+function which is just a wrapper to ignore the supplied argument when
+calling it, but here's your chance to have something different.
+Called with funcall, not call-interactively."
+ :group 'feedmail-queue
+ :type 'function
+)
+
+
+(defcustom feedmail-queue-alternative-mail-header-separator nil
+ "*Alternative header demarcation for queued messages.
+If you sometimes get alternative values for mail-header-separator in
+queued messages, set the value of this variable to whatever it is.
+For example, rmail-resend uses a mail-header-separator value of empty
+string (\"\") when you send/queue a message.
+
+When trying to send a queued message, if the value of this variable is
+non-nil, feedmail will first try to send the message using the value
+of mail-header-separator. If it can't find that, it will temporarily
+set mail-header-separator to the value of
+feedmail-queue-alternative-mail-header-separator and try again."
+ :group 'feedmail-queue
+ :type 'string
+)
+
+
+(defcustom feedmail-queue-runner-message-sender 'mail-send-and-exit
+ "*Function to initiate sending a message file.
+Called for each message read back out of the queue directory with a
+single argument, the optional argument used in the call to
+feedmail-run-the-queue or feedmail-run-the-queue-no-prompts.
+Interactively, that argument will be the prefix argument. Most people
+want mail-send-and-exit (bound to C-c C-c in mail-mode), but here's
+your chance to have something different. Called with funcall, not
+call-interactively."
+ :group 'feedmail-queue
+ :type 'function
+)
+
+
+(defcustom feedmail-queue-runner-cleaner-upper
+ '(lambda (fqm-file &optional arg)
+ (delete-file fqm-file)
+ (if (and arg feedmail-queue-chatty) (message "FQM: Nuked %s" fqm-file)))
+ "*Function that will be called after a message has been sent. It's
+not called in the case of errors. This function is called with two
+arguments, the name of the message queue file for the message just
+sent, and the optional argument used in the call to
+feedmail-run-the-queue or feedmail-run-the-queue-no-prompts.
+Interactively, that argument will be the prefix argument. In any
+case, the affiliated buffer is killed elsewhere, so don't do that
+inside this function. Return value is ignored.
+
+The default action is an anonymous function which gets rid of the file
+from the queue directory. With a non-nil second argument, a brief
+message is give for each file deleted. You could replace this
+function, for example, to archive all of your sent messages someplace
+(though there are better ways to get that particular result)."
+ :group 'feedmail-queue
+ :type 'function
+)
+
+
+(defvar feedmail-queue-runner-is-active nil
+ "*Non-nil means we're inside the logic of the queue-running loop.
+That is, iterating over all messages in the queue to send them. In
+that case, the value is the name of the queued message file currently
+being processed. This can be used for differentiating customized code
+for different scenarios. Users shouldn't set or change this
+variable, but may depend on its value as described here.")
+
+
+(defvar feedmail-is-a-resend nil
+ "*Non-nil means the the message is a RESEND (in the RFC-822 sense).
+This affects the composition of certain headers. feedmail sets this
+variable as soon as it starts prepping the message text buffer, so any
+user-supplied functions can rely on it. Users shouldn't set or change this
+variable, but may depend on its value as described here.")
+
+
+(defcustom feedmail-buffer-eating-function 'feedmail-buffer-to-binmail
+ "*Function used to send the prepped buffer to a subprocess.
+The function's three (mandatory) arguments are: (1) the buffer
+containing the prepped message; (2) a buffer where errors should be
+directed; and (3) a list containing the addresses individually as
+strings. Three popular choices for this are
+feedmail-buffer-to-binmail, feedmail-buffer-to-smtpmail, and
+feedmail-buffer-to-sendmail. If you use the sendmail form, you
+probably want to set feedmail-nuke-bcc and/or feedmail-nuke-resent-bcc
+to nil. If you use the binmail form, check the value of
+feedmail-binmail-template."
+ :group 'feedmail-misc
+ :type 'function
+)
+
+
+(defcustom feedmail-binmail-template (if mail-interactive "/bin/mail %s" "/bin/rmail %s")
+ "*Command template for the subprocess which will get rid of the mail.
+It can result in any command understandable by /bin/sh. Might not
+work at all in non-UNIX environments. The single '%s', if present,
+gets replaced by the space-separated, simplified list of addressees.
+Used in feedmail-buffer-to-binmail to form the shell command which
+will receive the contents of the prepped buffer as stdin. If you'd
+like your errors to come back as mail instead of immediately in a
+buffer, try /bin/rmail instead of /bin/mail (this can be accomplished
+by keeping the default nil setting of mail-interactive). You might
+also like to consult local mail experts for any other interesting
+command line possibilities."
+ :group 'feedmail-misc
+ :type 'string
+)
+
+
+;; feedmail-buffer-to-binmail, feedmail-buffer-to-sendmail, and
+;; feedmail-buffer-to-smptmail are the only things provided for values
+;; for the variable feedmail-buffer-eating-function. It's pretty easy
+;; to write your own, though.
+(defun feedmail-buffer-to-binmail (prepped errors-to addr-listoid)
+ "Function which actually calls /bin/mail as a subprocess.
+Feeds the buffer to it."
+ (set-buffer prepped)
+ (apply
+ 'call-process-region
+ (append (list (point-min) (point-max) "/bin/sh" nil errors-to nil "-c"
+ (format feedmail-binmail-template
+ (mapconcat 'identity addr-listoid " "))))))
+
+
+(defun feedmail-buffer-to-sendmail (prepped errors-to addr-listoid)
+ "Function which actually calls sendmail as a subprocess.
+Feeds the buffer to it. Probably has some flaws for RESENT-* and other
+complicated cases."
+ (set-buffer prepped)
+ (apply 'call-process-region
+ (append (list (point-min) (point-max)
+ (if (boundp 'sendmail-program) sendmail-program "/usr/lib/sendmail")
+ nil errors-to nil "-oi" "-t")
+ ;; provide envelope "from" to sendmail; results will vary
+ (list "-f" user-mail-address)
+ ;; These mean "report errors by mail" and "deliver in background".
+ (if (null mail-interactive) '("-oem" "-odb")))))
+
+;; provided by jam@austin.asc.slb.com (James A. McLaughlin);
+;; simplified by WJC after more feedmail development;
+;; idea (but not implementation) of copying smtpmail trace buffer to
+;; feedmail error buffer from:
+;; Mon 14-Oct-1996; Douglas Gray Stephens
+;; modified to insert error for displaying
+(defun feedmail-buffer-to-smtpmail (prepped errors-to addr-listoid)
+ "Function which actually calls smtpmail-via-smtp to send buffer as e-mail."
+ ;; I'm not sure smtpmail.el is careful about the following
+ ;; return value, but it also uses it internally, so I will fear
+ ;; no evil.
+ (require 'smtpmail)
+ (if (not (smtpmail-via-smtp addr-listoid prepped))
+ (progn
+ (set-buffer errors-to)
+ (insert "Send via smtpmail failed. Probable SMTP protocol error.\n")
+ (insert "Look for details below or in the *Messages* buffer.\n\n")
+ (let ((case-fold-search t)
+ ;; don't be overconfident about the name of the trace buffer
+ (tracer (concat "trace.*smtp.*" (regexp-quote smtpmail-smtp-server))))
+ (mapcar
+ '(lambda (buffy)
+ (if (string-match tracer (buffer-name buffy))
+ (progn
+ (insert "SMTP Trace from " (buffer-name buffy) "\n---------------")
+ (insert-buffer buffy)
+ (insert "\n\n"))))
+ (buffer-list))))))
+
+
+;; just a place to park a docstring
+(defconst feedmail-fiddle-plex-blurb nil
+ "A fiddle-plex is a concise way of specifying how to fiddle with a header field.
+It is a list of up to 4 elements: NAME, VALUE, ACTION, FOLDING. The element
+VALUE can also be a list sometimes.
+
+NAME is the name of the header field to be fiddled with. Although case doesn't
+matter in looking for headers, case of NAME is preserved when a header is inserted
+via fiddling. It shouldn't include the trailing colon.
+
+VALUE is either nil, a simple string, a function returning nil or a string, or,
+as described below for ACTION 'combine, a list of up to three values.
+
+ACTION describes the nature of the fiddling to be done. Possibilities
+for ACTION (default is 'supplement):
+
+ 'supplement Leave other like fields as-is, insert this one.
+
+ 'replace Delete other like fields, if any, and insert this one.
+
+ 'create Insert this one only if no like field exists.
+
+ 'combine Combine aggregate values of like fields with this one.
+ In this case, VALUE has a special form. It is a list
+ of three items: VAL-PRE, VAL-LIKE, and VAL-POST.
+ VAL-PRE and VAL-POST are strings or nil. VAL-LIKE may
+ be either a string or a function (it may also be nil,
+ but there's not much point to that).
+
+ Values of like header fields are aggregated, leading and
+ trailing whitespace is removed, and embedded
+ whitespace is left as-is. If there are no like
+ fields, or the aggregate value is an empty string,
+ VAL-LIKE is not used. Else, if VAL-LIKE is a function,
+ it is called with two arguments: NAME and the
+ aggregate like values. Else, if VAL-LIKE is a string, it is
+ used as a format string where a single \%s will be
+ replaced by the aggregate values of like fields.
+
+ VAL-PRE, the results of using VAL-LIKE, and VAL-POST
+ are concatenated, and the result, if not nil and not
+ an empty string, is used as the new value for the
+ field. Although this description sounds a bit
+ complicated, the idea is to provide a mechanism for
+ combining the old value with a new value in a flexible
+ way. For example, if you wanted to add a new value to
+ an existing header field by adding a semi-colon and
+ then starting the new value on a continuation line,
+ you might specify this:
+
+ (nil \"%s;\\n\\t\" \"This is my new value\")
+
+FOLDING can be nil, in which case VALUE is used as-is. If FOLDING is
+non-nil, feedmail \"smart filling\" is done on VALUE just before
+insertion.
+")
+
+
+(defun feedmail-send-it ()
+ "A function which is a suitable value for send-mail-function.
+To use it, you probably want something like this in your .emacs or
+similar place:
+
+ (setq send-mail-function 'feedmail-send-it)
+ (autoload 'feedmail-send-it \"feedmail\")"
+
+ ;; avoid matching trouble over slash vs backslash by getting canonical
+ (if feedmail-queue-directory
+ (setq feedmail-queue-directory (expand-file-name feedmail-queue-directory)))
+ (if feedmail-queue-draft-directory
+ (setq feedmail-queue-draft-directory (expand-file-name feedmail-queue-draft-directory)))
+ (if (not feedmail-enable-queue) (feedmail-send-it-immediately)
+ ;; else, queuing is enabled, should we ask about it or just do it?
+ (if feedmail-ask-before-queue
+ (funcall (feedmail-queue-send-edit-prompt))
+ (feedmail-dump-message-to-queue feedmail-queue-directory 'after-queue))))
+
+
+(defun feedmail-message-action-send ()
+ ;; hooks can make this take a while so clear the prompt
+ (message "FQM: Immediate send...")
+ (feedmail-send-it-immediately))
+
+
+;; From a VM mailing list discussion and some suggestions from Samuel Mikes <smikes@alumni.hmc.edu>
+(defun feedmail-queue-express-to-queue ()
+ "*Send message directly to the queue, with a minimum of fuss and bother."
+ (interactive)
+ (let ((feedmail-enable-queue t)
+ (feedmail-ask-before-queue nil)
+ (feedmail-queue-reminder-alist nil)
+ (feedmail-queue-chatty-sit-for 0))
+ (feedmail-send-it)
+ )
+)
+
+
+(defun feedmail-queue-express-to-draft ()
+ "*Send message directly to the draft queue, with a minimum of fuss and bother."
+ (interactive)
+ (let ((feedmail-queue-directory feedmail-queue-draft-directory))
+ (feedmail-queue-express-to-queue)
+ )
+)
+
+
+(defun feedmail-message-action-send-strong ()
+ (let ((feedmail-confirm-outgoing nil)) (feedmail-message-action-send)))
+
+
+(defun feedmail-message-action-edit ()
+ (error "FQM: Message not queued; returning to edit"))
+
+
+(defun feedmail-message-action-draft ()
+ (feedmail-dump-message-to-queue feedmail-queue-draft-directory 'after-draft))
+
+
+(defun feedmail-message-action-draft-strong ()
+ (let ((buffer-file-name nil))
+ (feedmail-message-action-draft)))
+
+
+(defun feedmail-message-action-queue ()
+ (feedmail-dump-message-to-queue feedmail-queue-directory 'after-queue))
+
+
+(defun feedmail-message-action-queue-strong ()
+ (let ((buffer-file-name nil))
+ (feedmail-message-action-queue)))
+
+
+(defun feedmail-message-action-toggle-spray ()
+ (let ((feedmail-enable-spray (not feedmail-enable-spray)))
+ (if feedmail-enable-spray
+ (message "FQM: For this message, spray toggled ON")
+ (message "FQM: For this message, spray toggled OFF"))
+ (sit-for 3)
+ ;; recursion, but harmless
+ (feedmail-send-it)))
+
+
+(defun feedmail-message-action-help ()
+ (let ((d-string " "))
+ (if (stringp feedmail-ask-before-queue-default)
+ (setq d-string feedmail-ask-before-queue-default)
+ (setq d-string (char-to-string feedmail-ask-before-queue-default)))
+ (feedmail-queue-send-edit-prompt-help d-string)
+ ;; recursive, but no worries (it goes deeper on user action)
+ (feedmail-send-it)))
+
+
+;;;###autoload
+(defun feedmail-run-the-queue-no-prompts (&optional arg)
+ "Like feedmail-run-the-queue, but suppress confirmation prompts."
+ (interactive "p")
+ (let ((feedmail-confirm-outgoing nil)) (feedmail-run-the-queue arg)))
+
+;;;###autoload
+(defun feedmail-run-the-queue-global-prompt (&optional arg)
+ "Like feedmail-run-the-queue, but with a global confirmation prompt.
+This is generally most useful if run non-interactively, since you can
+bail out with an appropriate answer to the global confirmation prompt."
+ (interactive "p")
+ (let ((feedmail-queue-runner-confirm-global t)) (feedmail-run-the-queue arg)))
+
+;;;###autoload
+(defun feedmail-run-the-queue (&optional arg)
+ "Visit each message in the feedmail queue directory and send it out.
+Return value is a list of three things: number of messages sent, number of
+messages skipped, and number of non-message things in the queue (commonly
+backup file names and the like)."
+ (interactive "p")
+ ;; avoid matching trouble over slash vs backslash by getting canonical
+ (if feedmail-queue-directory
+ (setq feedmail-queue-directory (expand-file-name feedmail-queue-directory)))
+ (if feedmail-queue-draft-directory
+ (setq feedmail-queue-draft-directory (expand-file-name feedmail-queue-draft-directory)))
+ (let* ((maybe-file)
+ (qlist (feedmail-look-at-queue-directory feedmail-queue-directory))
+ (dlist (feedmail-look-at-queue-directory feedmail-queue-draft-directory))
+ (q-cnt (nth 0 qlist))
+ (q-oth (nth 1 qlist))
+ (d-cnt (nth 0 dlist))
+ (d-oth (nth 1 dlist))
+ (messages-sent 0)
+ (messages-skipped 0)
+ (blobby-buffer)
+ (already-buffer)
+ (this-mhsep)
+ (do-the-run t)
+ (list-of-possible-fqms))
+ (if (and (> q-cnt 0) feedmail-queue-runner-confirm-global)
+ (setq do-the-run
+ (if (fboundp 'y-or-n-p-with-timeout)
+ (y-or-n-p-with-timeout (format "FQM: Draft: %dm+%d, Queue: %dm+%d; run the queue? "
+ d-cnt d-oth q-cnt q-oth)
+ 5 nil)
+ (y-or-n-p (format "FQM: Draft: %dm+%d, Queue: %dm+%d; run the queue? "
+ d-cnt d-oth q-cnt q-oth))
+ )))
+ (if (not do-the-run)
+ (setq messages-skipped q-cnt)
+ (save-window-excursion
+ (setq list-of-possible-fqms (directory-files feedmail-queue-directory t))
+ (if feedmail-queue-run-orderer
+ (setq list-of-possible-fqms (funcall feedmail-queue-run-orderer list-of-possible-fqms)))
+ (mapcar
+ '(lambda (blobby)
+ (setq maybe-file (expand-file-name blobby feedmail-queue-directory))
+ (cond
+ ((file-directory-p maybe-file) nil) ; don't care about subdirs
+ ((feedmail-fqm-p blobby)
+ (setq blobby-buffer (generate-new-buffer (concat "FQM " blobby)))
+ (setq already-buffer
+ (if (fboundp 'find-buffer-visiting) ; missing from XEmacs
+ (find-buffer-visiting maybe-file)
+ (get-file-buffer maybe-file)))
+ (if (and already-buffer (buffer-modified-p already-buffer))
+ (save-window-excursion
+ (display-buffer (set-buffer already-buffer))
+ (if (fboundp 'y-or-n-p-with-timeout)
+ ;; make a guess that the user just forgot to save
+ (if (y-or-n-p-with-timeout (format "FQM: Visiting %s; save before send? " blobby) 10 t)
+ (save-buffer))
+ (if (y-or-n-p (format "FQM: Visiting %s; save before send? " blobby))
+ (save-buffer))
+ )))
+
+ (set-buffer blobby-buffer)
+ (setq buffer-offer-save nil)
+ (buffer-disable-undo blobby-buffer)
+ (insert-file-contents-literally maybe-file)
+ ;; work around text-vs-binary wierdness and also around rmail-resend's creative
+ ;; manipulation of mail-header-separator
+ ;;
+ ;; if we don't find the normal M-H-S, and the alternative is defined but also
+ ;; not found, try reading the file a different way
+ ;;
+ ;; if M-H-S not found and (a-M-H-S is nil or not found)
+ (if (and (not (feedmail-find-eoh t))
+ (or (not feedmail-queue-alternative-mail-header-separator)
+ (not
+ (let ((mail-header-separator feedmail-queue-alternative-mail-header-separator))
+ (feedmail-find-eoh t)))))
+ (let ((file-name-buffer-file-type-alist nil) (default-buffer-file-type nil))
+ (erase-buffer) (insert-file-contents maybe-file))
+ )
+ ;; if M-H-S not found and (a-M-H-S is non-nil and is found)
+ ;; temporarily set M-H-S to the value of a-M-H-S
+ (if (and (not (feedmail-find-eoh t))
+ feedmail-queue-alternative-mail-header-separator
+ (let ((mail-header-separator feedmail-queue-alternative-mail-header-separator))
+ (feedmail-find-eoh t)))
+ (setq this-mhsep feedmail-queue-alternative-mail-header-separator)
+ (setq this-mhsep mail-header-separator))
+ (funcall feedmail-queue-runner-mode-setter arg)
+ (condition-case nil ; don't give up the loop if user skips some
+ (let ((feedmail-enable-queue nil)
+ (mail-header-separator this-mhsep)
+ (feedmail-queue-runner-is-active maybe-file))
+ (funcall feedmail-queue-runner-message-sender arg)
+ (set-buffer blobby-buffer)
+ (if (buffer-modified-p) ; still modified, means wasn't sent
+ (setq messages-skipped (1+ messages-skipped))
+ (setq messages-sent (1+ messages-sent))
+ (funcall feedmail-queue-runner-cleaner-upper maybe-file arg)
+ (if (and already-buffer (not (file-exists-p maybe-file)))
+ ;; we have gotten rid of the file associated with the
+ ;; buffer, so update the buffer's notion of that
+ (save-excursion
+ (set-buffer already-buffer)
+ (setq buffer-file-name nil)))))
+ (error (setq messages-skipped (1+ messages-skipped))))
+ (kill-buffer blobby-buffer)
+ (if feedmail-queue-chatty
+ (progn
+ (message "FQM: %d to go, %d sent, %d skipped (%d other files ignored)"
+ (- q-cnt messages-sent messages-skipped)
+ messages-sent messages-skipped q-oth)
+ (sit-for feedmail-queue-chatty-sit-for))))))
+ list-of-possible-fqms)))
+ (if feedmail-queue-chatty
+ (progn
+ (message "FQM: %d sent, %d skipped (%d other files ignored)"
+ messages-sent messages-skipped q-oth)
+ (sit-for feedmail-queue-chatty-sit-for)
+ (feedmail-queue-reminder 'after-run)
+ (sit-for feedmail-queue-chatty-sit-for)))
+ (list messages-sent messages-skipped q-oth)))
+
+
+;;;###autoload
+(defun feedmail-queue-reminder (&optional what-event)
+ "Perform some kind of reminder activity about queued and draft messages.
+Called with an optional symbol argument which says what kind of event
+is triggering the reminder activity. The default is 'on-demand, which
+is what you typically would use if you were putting this in your emacs start-up
+or mail hook code. Other recognized values for WHAT-EVENT (these are passed
+internally by feedmail):
+
+ after-immediate (a message has just been sent in immediate mode)
+ after-queue (a message has just been queued)
+ after-draft (a message has just been placed in the draft directory)
+ after-run (the queue has just been run, possibly sending messages)
+
+WHAT-EVENT is used as a key into the table feedmail-queue-reminder-alist. If
+the associated value is a function, it is called without arguments and is expected
+to perform the reminder activity. You can supply your own reminder functions
+by redefining feedmail-queue-reminder-alist. If you don't want any reminders,
+you can set feedmail-queue-reminder-alist to nil."
+ (interactive "p")
+ (let ((key (if (and what-event (symbolp what-event)) what-event 'on-demand)) entry reminder)
+ (setq entry (assoc key feedmail-queue-reminder-alist))
+ (setq reminder (cdr entry))
+ (if (fboundp reminder) (funcall reminder)))
+ )
+
+
+(defun feedmail-queue-reminder-brief ()
+ "Brief display of draft and queued message counts in modeline."
+ (interactive)
+ (let (q-cnt d-cnt q-lis d-lis)
+ (setq q-lis (feedmail-look-at-queue-directory feedmail-queue-directory))
+ (setq d-lis (feedmail-look-at-queue-directory feedmail-queue-draft-directory))
+ (setq q-cnt (car q-lis))
+ (setq d-cnt (car d-lis))
+ (if (or (> q-cnt 0) (> d-cnt 0))
+ (progn
+ (message "FQM: [D: %d, Q: %d]" d-cnt q-cnt))))
+ )
+
+
+(defun feedmail-queue-reminder-medium ()
+ "Verbose display of draft and queued message counts in modeline."
+ (interactive)
+ (let (q-cnt d-cnt q-oth d-oth q-lis d-lis)
+ (setq q-lis (feedmail-look-at-queue-directory feedmail-queue-directory))
+ (setq d-lis (feedmail-look-at-queue-directory feedmail-queue-draft-directory))
+ (setq q-cnt (car q-lis))
+ (setq d-cnt (car d-lis))
+ (setq q-oth (nth 1 q-lis))
+ (setq d-oth (nth 1 d-lis))
+ (if (or (> q-cnt 0) (> d-cnt 0))
+ (progn
+ (message "FQM: Draft: %dm+%d in \"%s\", Queue: %dm+%d in \"%s\""
+ d-cnt d-oth (file-name-nondirectory feedmail-queue-draft-directory)
+ q-cnt q-oth (file-name-nondirectory feedmail-queue-directory)))))
+ )
+
+
+(defun feedmail-queue-send-edit-prompt ()
+ "Ask whether to queue, send immediately, or return to editing a message."
+ ;; Some implementation ideas here came from the userlock.el code
+ (discard-input)
+ (save-window-excursion
+ (let ((answer) (d-char) (d-string " "))
+ (if (stringp feedmail-ask-before-queue-default)
+ (progn
+ (setq d-char (string-to-char feedmail-ask-before-queue-default))
+ (setq d-string feedmail-ask-before-queue-default))
+ (setq d-string (char-to-string feedmail-ask-before-queue-default))
+ (setq d-char feedmail-ask-before-queue-default)
+ )
+ (while (null answer)
+ (message feedmail-ask-before-queue-prompt d-string)
+ (let ((user-sez
+ (let ((inhibit-quit t) (cursor-in-echo-area t) (echo-keystrokes 0))
+ (read-char-exclusive))))
+ (if (= user-sez help-char)
+ (setq answer '(^ . feedmail-message-action-help))
+ (if (or (eq user-sez ?\C-m) (eq user-sez ?\C-j) (eq user-sez ?y))
+ (setq user-sez d-char))
+ ;; these char-to-int things because of some incomprensible difference
+ ;; between the two in byte-compiled stuff between GNUemacs and XEmacs
+ ;; (well, I'm sure someone could comprehend it, but I say 'uncle')
+ (setq answer (or (assoc user-sez feedmail-prompt-before-queue-user-alist)
+ (and (fboundp 'char-to-int)
+ (assoc (char-to-int user-sez) feedmail-prompt-before-queue-user-alist))
+ (assoc user-sez feedmail-prompt-before-queue-standard-alist)
+ (and (fboundp 'char-to-int)
+ (assoc (char-to-int user-sez) feedmail-prompt-before-queue-standard-alist))))
+ (if (or (null answer) (null (cdr answer)))
+ (progn
+ (beep)
+ (message feedmail-ask-before-queue-reprompt d-string)
+ (sit-for 3)))
+ )))
+ (cdr answer)
+ )))
+
+(defconst feedmail-p-h-b-n "*FQM Help*")
+
+(defun feedmail-queue-send-edit-prompt-help (d-string)
+ (let ((fqm-help (get-buffer feedmail-p-h-b-n)))
+ (if (and fqm-help (get-buffer-window fqm-help))
+ (feedmail-queue-send-edit-prompt-help-later fqm-help d-string)
+ (feedmail-queue-send-edit-prompt-help-first d-string))))
+
+(defun feedmail-queue-send-edit-prompt-help-later (fqm-help d-string)
+ ;; scrolling fun
+ (save-selected-window
+ (let ((signal-error-on-buffer-boundary nil)
+ (fqm-window (display-buffer fqm-help)))
+ (select-window fqm-window)
+ (if (pos-visible-in-window-p (point-max) fqm-window)
+ (feedmail-queue-send-edit-prompt-help-first d-string)
+;; (goto-char (point-min))
+ (scroll-up nil)
+ ))))
+
+(defun feedmail-queue-send-edit-prompt-help-first (d-string)
+ (with-output-to-temp-buffer feedmail-p-h-b-n
+ (princ "You're dispatching a message and feedmail queuing is enabled.
+Typing ? or C-v will normally scroll this help buffer.
+
+Choices:
+ q QUEUE for later sending (via feedmail-run-the-queue)
+ Q QUEUE! like \"q\", but always make a new file
+ i IMMEDIATELY send this (but not the other queued messages)
+ I IMMEDIATELY! like \"i\", but skip following confirmation prompt
+ d DRAFT queue in the draft directory
+ D DRAFT! like \"d\", but always make a new file
+ e EDIT return to the message edit buffer (don't send or queue)
+ * SPRAY toggle spray mode (individual message transmissions)
+
+Synonyms:
+ s SEND immediately (same as \"i\")
+ S SEND! immediately (same as \"I\")
+ r ROUGH draft (same as \"d\")
+ R ROUGH! draft (same as \"R\")
+ n NOPE didn't mean it (same as \"e\")
+ y YUP do the default behavior (same as \"C-m\")
+
+The user-configurable default is currently \"")
+ (princ d-string)
+ (princ "\". For other possibilities,
+see the variable feedmail-prompt-before-queue-user-alist.
+")
+ (and (stringp feedmail-prompt-before-queue-help-supplement)
+ (princ feedmail-prompt-before-queue-help-supplement))
+ (save-excursion (set-buffer standard-output) (if (fboundp 'help-mode) (help-mode)))))
+
+(defun feedmail-look-at-queue-directory (queue-directory)
+ "Find out some things about a queue directory.
+Result is a list containing a count of queued messages in the
+directory, a count of other files in the directory, and a high water
+mark for prefix sequence numbers. Subdirectories are not included in
+the counts."
+ (let ((q-cnt 0) (q-oth 0) (high-water 0) (blobbet))
+ ;; iterate, counting things we find along the way in the directory
+ (if (file-directory-p queue-directory)
+ (mapcar
+ '(lambda (blobby)
+ (cond
+ ((file-directory-p blobby) nil) ; don't care about subdirs
+ ((feedmail-fqm-p blobby)
+ (setq blobbet (file-name-nondirectory blobby))
+ (if (string-match "^[0-9][0-9][0-9]-" blobbet)
+ (let ((water-mark))
+ (setq water-mark (string-to-int (substring blobbet 0 3)))
+ (if (> water-mark high-water) (setq high-water water-mark))))
+ (setq q-cnt (1+ q-cnt)))
+ (t (setq q-oth (1+ q-oth)))
+ ))
+ (directory-files queue-directory t)))
+ (list q-cnt q-oth high-water)))
+
+(defun feedmail-tidy-up-slug (slug)
+ "Utility for mapping out suspect characters in a potential filename"
+ ;; even programmers deserve a break sometimes, so cover nil for them
+ (if (null slug) (setq slug ""))
+ ;; replace all non-alphanumerics with hyphen for safety
+ (while (string-match "[^a-z0-9-]+" slug) (setq slug (replace-match "-" nil nil slug)))
+ ;; collapse multiple hyphens to one
+ (while (string-match "--+" slug) (setq slug (replace-match "-" nil nil slug)))
+ ;; for tidyness, peel off leading hyphens
+ (if (string-match "^-*" slug) (setq slug (replace-match "" nil nil slug)))
+ ;; for tidyness, peel off trailing hyphens
+ (if (string-match "-*$" slug) (setq slug (replace-match "" nil nil slug)))
+ slug
+)
+
+(defun feedmail-queue-subject-slug-maker (&optional queue-directory)
+ "Create a name for storing the message in the queue.
+Optional argument QUEUE-DIRECTORY specifies into which directory the
+file will be placed. The name is based on the SUBJECT: header (if
+there is one). If there is no subject,
+feedmail-queue-default-file-slug is consulted Special characters are
+mapped to mostly alphanumerics for safety."
+ (let ((eoh-marker) (case-fold-search t) (subject "") (s-point))
+ (setq eoh-marker (feedmail-find-eoh))
+ (goto-char (point-min))
+ ;; get raw subject value (first line, anyhow)
+ (if (re-search-forward "^SUBJECT:" eoh-marker t)
+ (progn (setq s-point (point))
+ (end-of-line)
+ (setq subject (buffer-substring s-point (point)))))
+ (setq subject (feedmail-tidy-up-slug subject))
+ (if (zerop (length subject))
+ (setq subject
+ (cond
+ ((stringp feedmail-queue-default-file-slug) feedmail-queue-default-file-slug)
+ ((fboundp feedmail-queue-default-file-slug)
+ (save-excursion (funcall feedmail-queue-default-file-slug)))
+ ((eq feedmail-queue-default-file-slug 'ask)
+ (file-name-nondirectory
+ (read-file-name "FQM: Message filename slug? "
+ (file-name-as-directory queue-directory) subject nil subject)))
+ (t "no subject"))
+ ))
+ (feedmail-tidy-up-slug subject) ;; one more time, with feeling
+ ))
+
+
+(defun feedmail-create-queue-filename (queue-directory)
+ (let ((slug "wjc"))
+ (cond
+ (feedmail-queue-slug-maker
+ (save-excursion (setq slug (funcall feedmail-queue-slug-maker queue-directory))))
+ (feedmail-ask-for-queue-slug
+ (setq slug (file-name-nondirectory
+ (read-file-name (concat "FQM: Message filename slug? [" slug "]? ")
+ (file-name-as-directory queue-directory) slug nil slug))))
+ )
+ (setq slug (feedmail-tidy-up-slug slug))
+ (setq slug (format "%03d-%s" (1+ (nth 2 (feedmail-look-at-queue-directory queue-directory))) slug))
+ (concat
+ (expand-file-name slug queue-directory)
+ feedmail-queue-fqm-suffix)
+ ))
+
+
+(defun feedmail-dump-message-to-queue (queue-directory what-event)
+ (or (file-accessible-directory-p queue-directory)
+ ;; progn to get nil result no matter what
+ (progn (make-directory queue-directory t) nil)
+ (file-accessible-directory-p queue-directory)
+ (error (concat "FQM: Message not queued; trouble with directory " queue-directory)))
+ (let ((filename)
+ (is-fqm)
+ (is-in-this-dir)
+ (previous-buffer-file-name buffer-file-name))
+ (if buffer-file-name
+ (progn
+ (setq is-fqm (feedmail-fqm-p buffer-file-name))
+ (setq is-in-this-dir (string-equal
+ (directory-file-name queue-directory)
+ (directory-file-name (expand-file-name (file-name-directory buffer-file-name)))))))
+ ;; if visiting a queued message, just save
+ (if (and is-fqm is-in-this-dir)
+ (setq filename buffer-file-name)
+ (setq filename (feedmail-create-queue-filename queue-directory)))
+ ;; make binary file on DOS/Win95/WinNT, etc
+ (let ((buffer-file-type feedmail-force-binary-write)) (write-file filename))
+ ;; convenient for moving from draft to q, for example
+ (if (and previous-buffer-file-name (or (not is-fqm) (not is-in-this-dir))
+ (y-or-n-p (format "FQM: Was previously %s; delete that? " previous-buffer-file-name)))
+ (delete-file previous-buffer-file-name))
+ (if feedmail-nuke-buffer-after-queue
+ (let ((a-s-file-name buffer-auto-save-file-name))
+ ;; be aggressive in nuking auto-save files
+ (and (kill-buffer (current-buffer))
+ delete-auto-save-files
+ (file-exists-p a-s-file-name)
+ (delete-file a-s-file-name))))
+ (if feedmail-queue-chatty
+ (progn (message (concat "FQM: Queued in " filename))
+ (sit-for feedmail-queue-chatty-sit-for)))
+ (if feedmail-queue-chatty
+ (progn
+ (feedmail-queue-reminder what-event)
+ (sit-for feedmail-queue-chatty-sit-for)))))
+
+
+;; from a similar function in mail-utils.el
+(defun feedmail-rfc822-time-zone (time)
+ (let* ((sec (or (car (current-time-zone time)) 0))
+ (absmin (/ (abs sec) 60)))
+ (format "%c%02d%02d" (if (< sec 0) ?- ?+) (/ absmin 60) (% absmin 60))))
+
+(defun feedmail-rfc822-date (arg-time)
+ (let ((time (if arg-time arg-time (current-time))))
+ (concat
+ (format-time-string "%a, %e %b %Y %T " time)
+ (feedmail-rfc822-time-zone time)
+ )))
+
+
+(defun feedmail-send-it-immediately ()
+ "Handle immediate sending, including during a queue run."
+ (let* ((feedmail-error-buffer (get-buffer-create " *FQM Outgoing Email Errors*"))
+ (feedmail-prepped-text-buffer (get-buffer-create " *FQM Outgoing Email Text*"))
+ (feedmail-raw-text-buffer (current-buffer))
+ (feedmail-address-list)
+ (eoh-marker)
+ (bcc-holder)
+ (resent-bcc-holder)
+ (a-re-rtcb "^RESENT-\\(TO\\|CC\\|BCC\\):")
+ (a-re-rtc "^RESENT-\\(TO\\|CC\\):")
+ (a-re-rb "^RESENT-BCC:")
+ (a-re-dtcb "^\\(TO\\|CC\\|BCC\\):")
+ (a-re-dtc "^\\(TO\\|CC\\):")
+ (a-re-db "^BCC:")
+ (mail-header-separator mail-header-separator) ;; to get a temporary changable copy
+ )
+ (unwind-protect
+ (save-excursion
+ (set-buffer feedmail-error-buffer) (erase-buffer)
+ (set-buffer feedmail-prepped-text-buffer) (erase-buffer)
+
+ ;; jam contents of user-supplied mail buffer into our scratch buffer
+ (insert-buffer feedmail-raw-text-buffer)
+
+ ;; require one newline at the end.
+ (goto-char (point-max))
+ (or (= (preceding-char) ?\n) (insert ?\n))
+
+ (let ((case-fold-search nil))
+ ;; Change header-delimiter to be what mailers expect (empty line).
+ (setq eoh-marker (feedmail-find-eoh)) ;; leaves match data in place or signals error
+ (replace-match "\n")
+ (setq mail-header-separator ""))
+
+ ;; mail-aliases nil = mail-abbrevs.el
+ (if (or feedmail-force-expand-mail-aliases
+ (and (fboundp 'expand-mail-aliases) mail-aliases))
+ (expand-mail-aliases (point-min) eoh-marker))
+
+ ;; make it pretty
+ (if feedmail-fill-to-cc (feedmail-fill-to-cc-function eoh-marker))
+ ;; ignore any blank lines in the header
+ (goto-char (point-min))
+ (while (and (re-search-forward "\n\n\n*" eoh-marker t) (< (point) eoh-marker))
+ (replace-match "\n"))
+
+ (let ((case-fold-search t) (addr-regexp))
+ (goto-char (point-min))
+ ;; there are some RFC-822 combinations/cases missed here,
+ ;; but probably good enough and what users expect
+ ;;
+ ;; use resent-* stuff only if there is at least one non-empty one
+ (setq feedmail-is-a-resend
+ (re-search-forward
+ ;; header name, followed by optional whitespace, followed by
+ ;; non-whitespace, followed by anything, followed by newline;
+ ;; the idea is empty RESENT-* headers are ignored
+ "^\\(RESENT-TO:\\|RESENT-CC:\\|RESENT-BCC:\\)\\s-*\\S-+.*$"
+ eoh-marker t))
+ ;; if we say so, gather the BCC stuff before the main course
+ (if (eq feedmail-deduce-bcc-where 'first)
+ (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rb) (setq addr-regexp a-re-db))
+ (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list))))
+ ;; the main course
+ (if (or (eq feedmail-deduce-bcc-where 'first) (eq feedmail-deduce-bcc-where 'last))
+ ;; handled by first or last cases, so don't get BCC stuff
+ (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rtc) (setq addr-regexp a-re-dtc))
+ (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list)))
+ ;; not handled by first or last cases, so also get BCC stuff
+ (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rtcb) (setq addr-regexp a-re-dtcb))
+ (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list))))
+ ;; if we say so, gather the BCC stuff after the main course
+ (if (eq feedmail-deduce-bcc-where 'last)
+ (progn (if feedmail-is-a-resend (setq addr-regexp a-re-rb) (setq addr-regexp a-re-db))
+ (setq feedmail-address-list (feedmail-deduce-address-list feedmail-prepped-text-buffer (point-min) eoh-marker addr-regexp feedmail-address-list))))
+ (if (not feedmail-address-list) (error "FQM: Sending...abandoned, no addressees"))
+ ;; not needed, but meets user expectations
+ (setq feedmail-address-list (nreverse feedmail-address-list))
+ ;; Find and handle any BCC fields.
+ (setq bcc-holder (feedmail-accume-n-nuke-header eoh-marker "^BCC:"))
+ (setq resent-bcc-holder (feedmail-accume-n-nuke-header eoh-marker "^RESENT-BCC:"))
+ (if (and bcc-holder (not feedmail-nuke-bcc))
+ (progn (goto-char (point-min))
+ (insert bcc-holder)))
+ (if (and resent-bcc-holder (not feedmail-nuke-resent-bcc))
+ (progn (goto-char (point-min))
+ (insert resent-bcc-holder)))
+ (goto-char (point-min))
+
+ ;; fiddle about, fiddle about, fiddle about....
+ (feedmail-fiddle-from)
+ (feedmail-fiddle-sender)
+ (feedmail-fiddle-x-mailer)
+ (feedmail-fiddle-message-id
+ (or feedmail-queue-runner-is-active (buffer-file-name feedmail-raw-text-buffer)))
+ (feedmail-fiddle-date
+ (or feedmail-queue-runner-is-active (buffer-file-name feedmail-raw-text-buffer)))
+ (feedmail-fiddle-list-of-fiddle-plexes feedmail-fiddle-plex-user-list)
+
+ ;; don't send out a blank headers of various sorts
+ ;; (this loses on continued line with a blank first line)
+ (goto-char (point-min))
+ (and feedmail-nuke-empty-headers ; hey, who's an empty-header?
+ (while (re-search-forward "^[A-Za-z0-9-]+:[ \t]*\n" eoh-marker t)
+ (replace-match ""))))
+
+ (run-hooks 'feedmail-last-chance-hook)
+
+ (let ((fcc (feedmail-accume-n-nuke-header eoh-marker "^FCC:"))
+ (also-file)
+ (confirm (cond
+ ((eq feedmail-confirm-outgoing 'immediate)
+ (not feedmail-queue-runner-is-active))
+ ((eq feedmail-confirm-outgoing 'queued) feedmail-queue-runner-is-active)
+ (t feedmail-confirm-outgoing))))
+ (if (or (not confirm) (feedmail-one-last-look feedmail-prepped-text-buffer))
+ (let ((user-mail-address (feedmail-envelope-deducer eoh-marker)))
+ (feedmail-give-it-to-buffer-eater)
+ (if (and (not feedmail-queue-runner-is-active) (setq also-file (buffer-file-name feedmail-raw-text-buffer)))
+ (progn ; if a file but not running the queue, offer to delete it
+ (setq also-file (expand-file-name also-file))
+ (if (or feedmail-queue-auto-file-nuke
+ (y-or-n-p (format "FQM: Delete message file %s? " also-file)))
+ (save-excursion
+ ;; if we delete the affiliated file, get rid
+ ;; of the file name association and make sure we
+ ;; don't annoy people with a prompt on exit
+ (delete-file also-file)
+ (set-buffer feedmail-raw-text-buffer)
+ (setq buffer-offer-save nil)
+ (setq buffer-file-name nil)
+ )
+ )))
+ (goto-char (point-min))
+ ;; re-insert and handle any FCC fields (and, optionally, any BCC).
+ (if fcc (let ((default-buffer-file-type feedmail-force-binary-write))
+ (insert fcc)
+ (if (not feedmail-nuke-bcc-in-fcc)
+ (progn (if bcc-holder (insert bcc-holder))
+ (if resent-bcc-holder (insert resent-bcc-holder))))
+
+ (run-hooks 'feedmail-before-fcc-hook)
+
+ (if feedmail-nuke-body-in-fcc
+ (progn (goto-char eoh-marker)
+ (if (natnump feedmail-nuke-body-in-fcc)
+ (forward-line feedmail-nuke-body-in-fcc))
+ (delete-region (point) (point-max))
+ ))
+ (mail-do-fcc eoh-marker)
+ )))
+ (error "FQM: Sending...abandoned") ; user bailed out of one-last-look
+ ))) ; unwind-protect body (save-excursion)
+
+ ;; unwind-protect cleanup forms
+ (kill-buffer feedmail-prepped-text-buffer)
+ (set-buffer feedmail-error-buffer)
+ (if (zerop (buffer-size)) (kill-buffer feedmail-error-buffer)
+ (progn (display-buffer feedmail-error-buffer)
+ ;; read fast ... the meter is running
+ (if (and feedmail-queue-runner-is-active feedmail-queue-chatty)
+ (progn (message "FQM: Sending...failed") (ding t) (sit-for 3)))
+ (error "FQM: Sending...failed")))
+ (set-buffer feedmail-raw-text-buffer))
+ ) ; let
+ (if (and feedmail-queue-chatty (not feedmail-queue-runner-is-active))
+ (progn
+ (feedmail-queue-reminder 'after-immediate)
+ (sit-for feedmail-queue-chatty-sit-for)))
+ )
+
+
+(defun feedmail-fiddle-header (name value &optional action folding)
+ "Internal feedmail function for jamming fields into message header.
+NAME, VALUE, ACTION, and FOLDING are the four elements of a
+fiddle-plex, as described in the documentation for the variable
+feedmail-fiddle-plex-blurb."
+ (let ((case-fold-search t)
+ (header-colon (concat (regexp-quote name) ":"))
+ header-regexp eoh-marker has-like ag-like val-like that-point)
+ (setq header-regexp (concat "^" header-colon))
+ (setq eoh-marker (feedmail-find-eoh))
+ (goto-char (point-min))
+ (setq has-like (re-search-forward header-regexp eoh-marker t))
+
+ (if (not action) (setq action 'supplement))
+ (cond
+ ((eq action 'supplement)
+ ;; trim leading/trailing whitespace
+ (if (string-match "\\`[ \t\n]+" value)
+ (setq value (substring value (match-end 0))))
+ (if (string-match "[ \t\n]+\\'" value)
+ (setq value (substring value 0 (match-beginning 0))))
+ (if (> (length value) 0)
+ (progn
+ (if feedmail-fiddle-headers-upwardly
+ (goto-char (point-min))
+ (goto-char eoh-marker))
+ (setq that-point (point))
+ (insert name ": " value "\n")
+ (if folding (feedmail-fill-this-one that-point (point))))))
+
+ ((eq action 'replace)
+ (if has-like (feedmail-accume-n-nuke-header eoh-marker header-regexp))
+ (feedmail-fiddle-header name value 'supplement folding))
+
+ ((eq action 'create)
+ (if (not has-like) (feedmail-fiddle-header name value 'supplement folding)))
+
+ ((eq action 'combine)
+ (setq val-like (nth 1 value))
+ (setq ag-like (or (feedmail-accume-n-nuke-header eoh-marker header-regexp) ""))
+ ;; get rid of initial header name from first instance (front of string)
+ (if (string-match (concat header-regexp "[ \t\n]+") ag-like)
+ (setq ag-like (replace-match "" t t ag-like)))
+ ;; get rid of embedded header names from subsequent instances
+ (while (string-match (concat "\n" header-colon "[ \t\n]+") ag-like)
+ (setq ag-like (replace-match "\n\t" t t ag-like)))
+ ;; trim leading/trailing whitespace
+ (if (string-match "\\`[ \t\n]+" ag-like)
+ (setq ag-like (substring ag-like (match-end 0))))
+ (if (string-match "[ \t\n]+\\'" ag-like)
+ (setq ag-like (substring ag-like 0 (match-beginning 0))))
+ ;; if ag-like is not nil and not an empty string, transform it via a function
+ ;; call or format operation
+ (if (> (length ag-like) 0)
+ (setq ag-like
+ (cond
+ ((and (symbolp val-like) (fboundp val-like))
+ (funcall val-like name ag-like))
+ ((stringp val-like)
+ (format val-like ag-like))
+ (t nil))))
+ (feedmail-fiddle-header name (concat (nth 0 value) ag-like (nth 2 value)) 'supplement folding)))
+ ))
+
+(defun feedmail-give-it-to-buffer-eater ()
+ (save-excursion
+ (if feedmail-enable-spray
+ (mapcar
+ '(lambda (feedmail-spray-this-address)
+ (let ((spray-buffer (get-buffer-create " *FQM Outgoing Email Spray*")))
+ (save-excursion
+ (set-buffer spray-buffer)
+ (erase-buffer)
+ ;; not life's most efficient methodology, but spraying isn't
+ ;; an every-5-minutes event either
+ (insert-buffer feedmail-prepped-text-buffer)
+ ;; There's a good case to me made that each separate transmission of
+ ;; a message in the spray should have a distinct MESSAGE-ID:. There
+ ;; is also a less compelling argument in the other direction. I think
+ ;; they technically should have distinct MESSAGE-ID:s, but I doubt that
+ ;; anyone cares, practically. If someone complains about it, I'll add
+ ;; it.
+ (feedmail-fiddle-list-of-spray-fiddle-plexes feedmail-spray-address-fiddle-plex-list)
+ ;; this (let ) is just in case some buffer eater
+ ;; is cheating and using the global variable name instead
+ ;; of its argument to find the buffer
+ (let ((feedmail-prepped-text-buffer spray-buffer))
+ (funcall feedmail-buffer-eating-function
+ feedmail-prepped-text-buffer
+ feedmail-error-buffer
+ (list feedmail-spray-this-address))))
+ (kill-buffer spray-buffer)
+ ))
+ feedmail-address-list)
+ (funcall feedmail-buffer-eating-function
+ feedmail-prepped-text-buffer
+ feedmail-error-buffer
+ feedmail-address-list))))
+
+
+(defun feedmail-envelope-deducer (eoh-marker)
+ "If feedmail-deduce-envelope-from is false, simply return
+user-mail-address. Else, look for SENDER: or FROM: (or RESENT-*) and
+return that value."
+ (if (not feedmail-deduce-envelope-from)
+ user-mail-address
+ (let ((from-list))
+ (setq from-list
+ (feedmail-deduce-address-list
+ (current-buffer) (point-min) eoh-marker (if feedmail-is-a-resend "^RESENT-SENDER:" "^SENDER:")
+ from-list))
+ (if (not from-list)
+ (setq from-list
+ (feedmail-deduce-address-list
+ (current-buffer) (point-min) eoh-marker (if feedmail-is-a-resend "^RESENT-FROM:" "^FROM:")
+ from-list)))
+ (if (and from-list (car from-list)) (car from-list) user-mail-address))))
+
+
+(defun feedmail-fiddle-from ()
+ "Fiddle FROM:."
+ ;; default is to fall off the end of the list and do nothing
+ (cond
+ ;; nil means do nothing
+ ((eq nil feedmail-from-line) nil)
+ ;; t is the same a using the default computation, so compute it and recurse
+ ;; user-full-name suggested by kpc@ptolemy.arc.nasa.gov (=Kimball Collins)
+ ;; improvement using user-mail-address suggested by
+ ;; gray@austin.apc.slb.com (Douglas Gray Stephens)
+ ((eq t feedmail-from-line)
+ (let ((feedmail-from-line
+ (let ((at-stuff
+ (if user-mail-address user-mail-address (concat (user-login-name) "@" (system-name)))))
+ (cond
+ ((eq mail-from-style nil) at-stuff)
+ ((eq mail-from-style 'parens) (concat at-stuff " (" (user-full-name) ")"))
+ ((eq mail-from-style 'angles) (concat "\"" (user-full-name) "\" <" at-stuff ">"))
+ ))))
+ (feedmail-fiddle-from)))
+
+ ;; if it's a string, simply make a fiddle-plex out of it and recurse
+ ((stringp feedmail-from-line)
+ (let ((feedmail-from-line (list "ignored" feedmail-from-line 'create)))
+ (feedmail-fiddle-from)))
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp feedmail-from-line) (fboundp feedmail-from-line))
+ (let ((feedmail-from-line (funcall feedmail-from-line)))
+ (feedmail-fiddle-from)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp feedmail-from-line)
+ (feedmail-fiddle-header
+ (if feedmail-is-a-resend "Resent-From" "From")
+ (nth 1 feedmail-from-line) ;; value
+ (nth 2 feedmail-from-line) ;; action
+ (nth 3 feedmail-from-line))))) ;; folding
+
+
+(defun feedmail-fiddle-sender ()
+ "Fiddle SENDER:."
+ ;; default is to fall off the end of the list and do nothing
+ (cond
+ ;; nil means do nothing
+ ((eq nil feedmail-sender-line) nil)
+ ;; t is not allowed, but handled it just to avoid bugs later
+ ((eq t feedmail-sender-line) nil)
+
+ ;; if it's a string, simply make a fiddle-plex out of it and recurse
+ ((stringp feedmail-sender-line)
+ (let ((feedmail-sender-line (list "ignored" feedmail-sender-line 'create)))
+ (feedmail-fiddle-sender)))
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp feedmail-sender-line) (fboundp feedmail-sender-line))
+ (let ((feedmail-sender-line (funcall feedmail-sender-line)))
+ (feedmail-fiddle-sender)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp feedmail-sender-line)
+ (feedmail-fiddle-header
+ (if feedmail-is-a-resend "Resent-Sender" "Sender")
+ (nth 1 feedmail-sender-line) ;; value
+ (nth 2 feedmail-sender-line) ;; action
+ (nth 3 feedmail-sender-line))))) ;; folding
+
+
+(defun feedmail-default-date-generator (maybe-file)
+ "Default function for generating DATE: header contents."
+ (let ((date-time))
+ (if (and (not feedmail-queue-use-send-time-for-date) maybe-file)
+ (setq date-time (nth 5 (file-attributes maybe-file))))
+ (feedmail-rfc822-date date-time))
+ )
+
+
+(defun feedmail-fiddle-date (maybe-file)
+ "Fiddle DATE:. See documentation of feedmail-date-generator."
+ ;; default is to fall off the end of the list and do nothing
+ (cond
+ ;; nil means do nothing
+ ((eq nil feedmail-date-generator) nil)
+ ;; t is the same a using the function feedmail-default-date-generator, so let it and recurse
+ ((eq t feedmail-date-generator)
+ (let ((feedmail-date-generator (feedmail-default-date-generator maybe-file)))
+ (feedmail-fiddle-date maybe-file)))
+
+ ;; if it's a string, simply make a fiddle-plex out of it and recurse
+ ((stringp feedmail-date-generator)
+ (let ((feedmail-date-generator (list "ignored" feedmail-date-generator 'create)))
+ (feedmail-fiddle-date maybe-file)))
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp feedmail-date-generator) (fboundp feedmail-date-generator))
+ (let ((feedmail-date-generator (funcall feedmail-date-generator maybe-file)))
+ (feedmail-fiddle-date maybe-file)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp feedmail-date-generator)
+ (feedmail-fiddle-header
+ (if feedmail-is-a-resend "Resent-Date" "Date")
+ (nth 1 feedmail-date-generator) ;; value
+ (nth 2 feedmail-date-generator) ;; action
+ (nth 3 feedmail-date-generator))))) ;; folding
+
+
+(defun feedmail-default-message-id-generator (maybe-file)
+ "Default function for generating MESSAGE-ID: header contents.
+Based on a date and a sort of random number for tie breaking. Unless
+feedmail-message-id-suffix is defined, uses user-mail-address, so be
+sure it's set."
+ (let ((date-time)
+ (end-stuff (if feedmail-message-id-suffix feedmail-message-id-suffix user-mail-address)))
+ (if (string-match "^\\(.*\\)@" end-stuff)
+ (setq end-stuff
+ (concat (if (equal (match-beginning 1) (match-end 1)) "" "-") end-stuff))
+ (setq end-stuff (concat "@" end-stuff)))
+ (if (and (not feedmail-queue-use-send-time-for-message-id) maybe-file)
+ (setq date-time (nth 5 (file-attributes maybe-file))))
+ (format "<%d-%s%s%s>"
+ (mod (random) 10000)
+ (format-time-string "%a%d%b%Y%H%M%S" date-time)
+ (feedmail-rfc822-time-zone date-time)
+ end-stuff))
+ )
+
+(defun feedmail-fiddle-message-id (maybe-file)
+ "Fiddle MESSAGE-ID:. See documentation of feedmail-message-id-generator."
+ ;; default is to fall off the end of the list and do nothing
+ (cond
+ ;; nil means do nothing
+ ((eq nil feedmail-message-id-generator) nil)
+ ;; t is the same a using the function feedmail-default-message-id-generator, so let it and recurse
+ ((eq t feedmail-message-id-generator)
+ (let ((feedmail-message-id-generator (feedmail-default-message-id-generator maybe-file)))
+ (feedmail-fiddle-message-id maybe-file)))
+
+ ;; if it's a string, simply make a fiddle-plex out of it and recurse
+ ((stringp feedmail-message-id-generator)
+ (let ((feedmail-message-id-generator (list "ignored" feedmail-message-id-generator 'create)))
+ (feedmail-fiddle-message-id maybe-file)))
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp feedmail-message-id-generator) (fboundp feedmail-message-id-generator))
+ (let ((feedmail-message-id-generator (funcall feedmail-message-id-generator maybe-file)))
+ (feedmail-fiddle-message-id maybe-file)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp feedmail-message-id-generator)
+ (feedmail-fiddle-header
+ (if feedmail-is-a-resend "Resent-Message-ID" "Message-ID")
+ (nth 1 feedmail-message-id-generator) ;; value
+ (nth 2 feedmail-message-id-generator) ;; action
+ (nth 3 feedmail-message-id-generator))))) ;; folding
+
+
+(defun feedmail-default-x-mailer-generator ()
+ "Default function for generating X-MAILER: header contents."
+ (concat
+ (let ((case-fold-search t)) (if (string-match "emacs" emacs-version) "" "emacs "))
+ emacs-version " (via feedmail " feedmail-patch-level
+ (if feedmail-queue-runner-is-active " Q" " I")
+ (if feedmail-enable-spray "S" "")
+ (if feedmail-x-mailer-line-user-appendage ") " ")")
+ feedmail-x-mailer-line-user-appendage))
+
+
+(defun feedmail-fiddle-x-mailer ()
+ "Fiddle X-MAILER:. See documentation of feedmail-x-mailer-line."
+ ;; default is to fall off the end of the list and do nothing
+ (cond
+ ;; t is the same a using the function feedmail-default-x-mailer-generator, so let it and recurse
+ ((eq t feedmail-x-mailer-line)
+ (let ((feedmail-x-mailer-line (feedmail-default-x-mailer-generator)))
+ (feedmail-fiddle-x-mailer)))
+
+ ;; if it's a string, simply make a fiddle-plex out of it and recurse
+ ((stringp feedmail-x-mailer-line)
+ (let ((feedmail-x-mailer-line (list "ignored" (list feedmail-x-mailer-line ";\n\t%s") 'combine)))
+ (feedmail-fiddle-x-mailer)))
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp feedmail-x-mailer-line) (fboundp feedmail-x-mailer-line))
+ (let ((feedmail-x-mailer-line (funcall feedmail-x-mailer-line)))
+ (feedmail-fiddle-x-mailer)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp feedmail-x-mailer-line)
+ (feedmail-fiddle-header
+ (if feedmail-is-a-resend "X-Resent-Mailer" "X-Mailer")
+ (nth 1 feedmail-x-mailer-line) ;; value
+ (nth 2 feedmail-x-mailer-line) ;; action
+ (nth 3 feedmail-x-mailer-line))))) ;; folding
+
+
+(defun feedmail-fiddle-spray-address (addy-plex)
+ "Fiddle header for single spray address. Uses feedmail-spray-this-address."
+ ;; default is to fall off the end of the list and do nothing
+ (cond
+ ;; nil means do nothing
+ ((eq nil addy-plex) nil)
+ ;; t means the same as using "TO: and unembellished addy
+ ((eq t addy-plex)
+ (let ((addy-plex (list "To" feedmail-spray-this-address)))
+ (feedmail-fiddle-spray-address addy-plex)))
+
+ ;; if it's a string, simply make a fiddle-plex out of it and recurse, assuming
+ ;; the string names a header field (e.g., "TO")
+ ((stringp addy-plex)
+ (let ((addy-plex (list addy-plex feedmail-spray-this-address)))
+ (feedmail-fiddle-spray-address addy-plex)))
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp addy-plex) (fboundp addy-plex))
+ (let ((addy-plex (funcall addy-plex)))
+ (feedmail-fiddle-spray-address addy-plex)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp addy-plex)
+ (feedmail-fiddle-header
+ (nth 0 addy-plex) ;; name
+ (nth 1 addy-plex) ;; value
+ (nth 2 addy-plex) ;; action
+ (nth 3 addy-plex))))) ;; folding
+
+
+(defun feedmail-fiddle-list-of-spray-fiddle-plexes (list-of-fiddle-plexes)
+ "Fiddling based on a list of fiddle-plexes for spraying."
+ ;; default is to fall off the end of the list and do nothing
+ (let ((lofp list-of-fiddle-plexes) fp)
+ (if (listp lofp)
+ (while lofp
+ (setq fp (car lofp))
+ (setq lofp (cdr lofp))
+ (feedmail-fiddle-spray-address fp))
+ (feedmail-fiddle-spray-address lofp))))
+
+
+(defun feedmail-fiddle-list-of-fiddle-plexes (list-of-fiddle-plexes)
+ "Fiddling based on a list of fiddle-plexes. Values t, nil, and string are pointless."
+ ;; default is to fall off the end of the list and do nothing
+ (let ((lofp list-of-fiddle-plexes) fp)
+ (while lofp
+ (setq fp (car lofp))
+ (setq lofp (cdr lofp))
+ (cond
+
+ ;; if it's a function, call it and recurse with the resulting value
+ ((and (symbolp fp) (fboundp fp))
+ (let ((lofp (list (funcall fp)))) (feedmail-fiddle-list-of-fiddle-plexes lofp)))
+
+ ;; if it's a list, it must be a fiddle-plex -- so fiddle, man, fiddle
+ ((listp fp)
+ (feedmail-fiddle-header
+ (nth 0 fp)
+ (nth 1 fp) ;; value
+ (nth 2 fp) ;; action
+ (nth 3 fp))))))) ;; folding
+
+
+(defun feedmail-accume-n-nuke-header (header-end header-regexp)
+ "Delete headers matching a regexp and their continuation lines.
+There may be multiple such lines, and each may have arbitrarily
+many continuation lines. Return an accumulation of the deleted
+headers, including the intervening newlines."
+ (let ((case-fold-search t) (dropout))
+ (save-excursion
+ (goto-char (point-min))
+ ;; iterate over all matching lines
+ (while (re-search-forward header-regexp header-end t)
+ (forward-line 1)
+ (setq dropout (concat dropout (buffer-substring (match-beginning 0) (point))))
+ (delete-region (match-beginning 0) (point))
+ ;; get rid of any continuation lines
+ (while (and (looking-at "^[ \t].*\n") (< (point) header-end))
+ (forward-line 1)
+ (setq dropout (concat dropout (buffer-substring (match-beginning 0) (point))))
+ (replace-match ""))))
+ (identity dropout)))
+
+(defun feedmail-fill-to-cc-function (header-end)
+ "Smart filling of address headers (don't be fooled by the name).
+The filling tries to avoid splitting lines except at commas. This
+avoids, in particular, splitting within parenthesized comments in
+addresses. Headers filled include FROM:, REPLY-TO:, TO:, CC:, BCC:,
+RESENT-TO:, RESENT-CC:, and RESENT-BCC:."
+ (let ((case-fold-search t)
+ this-line
+ this-line-end)
+ (save-excursion
+ (goto-char (point-min))
+ ;; iterate over all TO:/CC:, etc, lines
+ (while
+ (re-search-forward
+ "^\\(FROM:\\|REPLY-TO:\\|TO:\\|CC:\\|BCC:\\|RESENT-TO:\\|RESENT-CC:\\|RESENT-BCC:\\)"
+ header-end t)
+ (setq this-line (match-beginning 0))
+ ;; replace 0 or more leading spaces with a single space
+ (and (looking-at "[ \t]*") (replace-match " "))
+ (forward-line 1)
+ ;; get any continuation lines
+ (while (and (looking-at "[ \t]+") (< (point) header-end))
+ (forward-line 1))
+ (setq this-line-end (point-marker))
+ (save-excursion (feedmail-fill-this-one this-line this-line-end))
+ ))))
+
+
+(defun feedmail-fill-this-one (this-line this-line-end)
+ "In-place smart filling of the region bounded by the two arguments."
+ (let ((fill-prefix "\t")
+ (fill-column feedmail-fill-to-cc-fill-column))
+ ;; The general idea is to break only on commas. Collapse
+ ;; multiple whitespace to a single blank; change
+ ;; all the blanks to something unprintable; change the
+ ;; commas to blanks; fill the region; change it back.
+ (goto-char this-line)
+ (while (re-search-forward "\\s-+" (1- this-line-end) t)
+ (replace-match " "))
+
+ (subst-char-in-region this-line this-line-end ? 2 t) ; blank->C-b
+ (subst-char-in-region this-line this-line-end ?, ? t) ; comma->blank
+
+ (fill-region-as-paragraph this-line this-line-end)
+
+ (subst-char-in-region this-line this-line-end ? ?, t) ; comma<-blank
+ (subst-char-in-region this-line this-line-end 2 ? t) ; blank<-C-b
+
+ ;; look out for missing commas before continuation lines
+ (goto-char this-line)
+ (while (re-search-forward "\\([^,]\\)\n\t[ ]*" this-line-end t)
+ (replace-match "\\1,\n\t"))
+ ))
+
+
+(require 'mail-utils) ; pick up mail-strip-quoted-names
+(defun feedmail-deduce-address-list (message-buffer header-start header-end addr-regexp address-list)
+ "Get address list with all comments and other excitement trimmed.
+Addresses are collected only from headers whose names match the fourth
+argument Returns a list of strings. Duplicate addresses will have
+been weeded out."
+ (let ((simple-address)
+ (address-blob)
+ (this-line)
+ (this-line-end))
+ (unwind-protect
+ (save-excursion
+ (set-buffer (get-buffer-create " *FQM scratch*")) (erase-buffer)
+ (insert-buffer-substring message-buffer header-start header-end)
+ (goto-char (point-min))
+ (let ((case-fold-search t))
+ (while (re-search-forward addr-regexp (point-max) t)
+ (replace-match "")
+ (setq this-line (match-beginning 0))
+ (forward-line 1)
+ ;; get any continuation lines
+ (while (and (looking-at "^[ \t]+") (< (point) (point-max)))
+ (forward-line 1))
+ (setq this-line-end (point-marker))
+ ;; only keep if we don't have it already
+ (setq address-blob
+ (mail-strip-quoted-names (buffer-substring this-line this-line-end)))
+ (while (string-match "\\([, \t\n\r]*\\)\\([^, \t\n\r]+\\)" address-blob)
+ (setq simple-address (substring address-blob (match-beginning 2) (match-end 2)))
+ (setq address-blob (replace-match "" t t address-blob))
+ (if (not (member simple-address address-list))
+ (add-to-list 'address-list simple-address)))
+ ))
+ (kill-buffer nil)))
+ (identity address-list)))
+
+
+(defun feedmail-one-last-look (feedmail-prepped-text-buffer)
+ "Offer the user one last chance to give it up."
+ (save-excursion
+ (save-window-excursion
+ (switch-to-buffer feedmail-prepped-text-buffer)
+ (if (and (fboundp 'y-or-n-p-with-timeout) (numberp feedmail-confirm-outgoing-timeout))
+ (y-or-n-p-with-timeout
+ "FQM: Send this email? "
+ (abs feedmail-confirm-outgoing-timeout)
+ (> feedmail-confirm-outgoing-timeout 0))
+ (y-or-n-p "FQM: Send this email? "))
+ )))
+
+(defun feedmail-fqm-p (might-be)
+ "Internal; does filename end with FQM suffix?"
+ (string-match (concat (regexp-quote feedmail-queue-fqm-suffix) "$") might-be))
+
+
+(defun feedmail-find-eoh (&optional noerror)
+ "Internal; finds the end of message header fields, returns mark just before it"
+ (save-excursion
+ (goto-char (point-min))
+ (if (re-search-forward (concat "^" (regexp-quote mail-header-separator) "\n") nil noerror)
+ (progn
+ (forward-line -1)
+ (point-marker)))))
+
+(provide 'feedmail)
+;;; feedmail.el ends here
HCoop / bpt / emacs.git / commitdiff