Customize @code{auto-mode-alist} to add more extensions. GNU Fortran
supports both free and fixed form. This manual mainly documents Fortran
mode, but the corresponding F90 mode features are mentioned when
-revelant.
+relevant.
Fortran mode provides special motion commands for Fortran statements
and subprograms, and indentation commands that understand Fortran
@texline @math{15\times 19\times 28 = 7980} years.
@infoline 15*19*28 = 7980 years.
This is the length of a Julian cycle. Working backwards, the previous
-year in which all three cycles began was 4713 BC, and so Scalinger
+year in which all three cycles began was 4713 BC, and so Scaliger
chose that year as the beginning of a Julian cycle. Since at the time
there were no historical records from before 4713 BC, using this year
as a starting point had the advantage of avoiding negative year
require XML parsers to read the DTD. With DTDs, it was impractical to
get validation without using an external DTD or reference to an
parameter entity. With RELAX NG and other schema languages, you can
-simulataneously get the benefits of validation and standalone XML
+simultaneously get the benefits of validation and standalone XML
documents. Therefore, I recommend that you do not reference an
external DOCTYPE in your XML documents.
@end itemize
@bye
-
Nutshell}). You can go back later to other parts of this document when
needed.
-@insertcopying
+@insertcopying
@menu
* Introduction:: Quick-Start information.
* Citation Info:: View the corresponding database entry.
* Chapterbib and Bibunits:: Multiple bibliographies in a Document.
* Citations Outside LaTeX:: How to make citations in Emails etc.
-* BibTeX Database Subsets:: Extract parts of a big database.
+* BibTeX Database Subsets:: Extract parts of a big database.
Index Support
* Citation Info:: View the corresponding database entry.
* Chapterbib and Bibunits:: Multiple bibliographies in a Document.
* Citations Outside LaTeX:: How to make citations in Emails etc.
-* BibTeX Database Subsets:: Extract parts of a big database.
+* BibTeX Database Subsets:: Extract parts of a big database.
@end menu
@node Creating Citations, Citation Styles, , Citations
@item e
Create a new BibTeX database file which contains all @i{marked} entries
in the selection buffer. If no entries are marked, all entries are
-selected.
+selected.
@item E
Create a new BibTeX database file which contains all @i{unmarked}
entries in the selection buffer. If no entries are marked, all entries
-are selected.
+are selected.
@item @key{TAB}
Enter a citation key with completion. This may also be a key which does
Before calling a @b{Ref@TeX{}} function, the style hook should always
test for the availability of the function, so that the style file will
-also work for people who do not use @b{Ref@TeX{}}.
+also work for people who do not use @b{Ref@TeX{}}.
Additions made with style files in the way described below remain local
to the current document. For example, if one package uses AMSTeX, the
Create a new BibTeX database file with all entries referenced in document.
The command prompts for a filename and writes the collected entries to
that file. Only entries referenced in the current document with
-any @code{\cite}-like macros are used.
+any @code{\cite}-like macros are used.
The sequence in the new file is the same as it was in the old database.
@end deffn
ordinary TOC window), the automatic recentering is turned on. When the
frame gets destroyed, automatic recentering is turned off again.
-This feature can be turned on and off from the menu
+This feature can be turned on and off from the menu
(Ref->Options).
@end defopt
t @r{This means to trust any label prefixes found.}
regexp @r{If a regexp, only prefixes matched by the regexp are trusted.}
list @r{List of accepted prefixes, as strings. The colon is part of}
- @r{the prefix, e.g. ("fn:" "eqn:" "item:").}
+ @r{the prefix, e.g. ("fn:" "eqn:" "item:").}
nil @r{Never trust a label prefix.}
@end example
The only disadvantage of using this feature is that the label context
@noindent @b{Version 4.24}
@itemize @bullet
-@item
+@item
Inserting citation commands now prompts for optional arguments
when called with a prefix argument. Related new options are
@code{reftex-cite-prompt-optional-args} and
-@code{reftex-cite-cleanup-optional-args}.
+@code{reftex-cite-cleanup-optional-args}.
@item
New option @code{reftex-trust-label-prefix}. Configure this variable
if you'd like RefTeX to base its classification of labels on prefixes.
@noindent @b{Version 4.22}
@itemize @bullet
-@item
+@item
New command @code{reftex-create-bibtex-file} to create a new database
with all entries referenced in the current document.
@item
@noindent @b{Version 4.21}
@itemize @bullet
-@item
+@item
Renaming labels from the toc buffer with key @kbd{M-%}.
@end itemize
@item
Environments like theorems can be placed into the TOC by putting
entries for @samp{"begin@{theorem@}"} in
-@code{reftex-setion-levels}.
+@code{reftex-section-levels}.
@end itemize
@noindent @b{Version 4.06}
document, all labels and associated context. New keys @kbd{i}, @kbd{l},
and @kbd{c}. New options @code{reftex-toc-include-labels},
@code{reftex-toc-include-context},
-@code{reftex-toc-include-file-boundaries}.
+@code{reftex-toc-include-file-boundaries}.
@end itemize
@noindent @b{Version 3.41}
** If you call `get-buffer-window' passing t as its second argument, it
will only search for windows on visible frames. Previously, passing t
-as the secord argument caused `get-buffer-window' to search all
+as the second argument caused `get-buffer-window' to search all
frames, visible or not.
** If you call `other-buffer' with a nil or omitted second argument, it
** Fortran mode changes
*** F90 mode and Fortran mode have support for `hs-minor-mode' (hideshow).
-It cannot deal with every code format, but ought to handle a sizeable
+It cannot deal with every code format, but ought to handle a sizable
majority.
*** F90 mode and Fortran mode have new navigation commands
}
-/* Find the symbol for namespace NAME. If not found, retrun NULL */
+/* Find the symbol for namespace NAME. If not found, return NULL */
static struct sym *
check_namespace (char *name, struct sym *context)
(isearch-toggle-specified-input-method): Set the above variables.
(isearch-toggle-input-method): Likewise.
(isearch-process-search-multibyte-characters): Give
- iseach-input-method as arg to read-multilingual-string.
+ isearch-input-method as arg to read-multilingual-string.
* international/mule-cmds.el (read-multilingual-string): Adjusted
for the previous change of variables related to input methods.
situation with respect to siblings, parent, and offspring is
unchanged from its last decoration. Use
`allout-decorate-item-and-context' instead to reassess and adjust
-relevent context, when suitable."
+relevant context, when suitable."
(if (not (equal (widget-get item-widget :last-decorated-tick)
allout-command-counter))
(let ((was-modified (buffer-modified-p))
(cond
;; CASE 3: Merge symbols together.
((eq (semantic-lex-token-class v) 'spp-symbol-merge)
- ;; We need to merge the tokens in the 'text segement together,
+ ;; We need to merge the tokens in the 'text segment together,
;; and produce a single symbol from it.
(let ((newsym
(mapconcat (lambda (tok)
;; deleting, and retrieving data from an AVL tree containing n elements
;; is O(log n). It is somewhat more rigidly balanced than other
;; self-balancing binary trees (such as red-black trees and AA trees),
-;; making insertion slighty slower, deletion somewhat slower, and
+;; making insertion slightly slower, deletion somewhat slower, and
;; retrieval somewhat faster (the asymptotic scaling is of course the
;; same for all types). Thus it may be a good choice when the tree will
;; be relatively static, i.e. data will be retrieved more often than
(defun byte-compile-if (form)
(byte-compile-form (car (cdr form)))
;; Check whether we have `(if (fboundp ...' or `(if (boundp ...'
- ;; and avoid warnings about the relevent symbols in the consequent.
+ ;; and avoid warnings about the relevant symbols in the consequent.
(let ((clause (nth 1 form))
(donetag (byte-compile-make-tag)))
(if (null (nthcdr 3 form))
;; Finally, get rid of the old frame.
(delete-frame frame-initial-frame t))
- ;; Otherwise, we don't need all that rigamarole; just apply
+ ;; Otherwise, we don't need all that rigmarole; just apply
;; the new parameters.
(let (newparms allparms tail)
(setq allparms (append initial-frame-alist
2010-10-24 Lars Magne Ingebrigtsen <larsi@gnus.org>
* nnimap.el (nnimap-request-head): New function.
- (nnimap-request-move-article): Try to be slighly faster by not
+ (nnimap-request-move-article): Try to be slightly faster by not
requesting the entire message when moving.
(nnimap-transform-headers): Don't bug out on bodiless articles.
(nnimap-send-command): Have no outstanding messages if the IMAP server
;; gnus-agent-regenerate-group can remove the article ID of every
;; article (with the exception of the last ID in the list - it's
;; special) that no longer appears in the overview. In this
- ;; situtation, the last article ID in the list implies that it,
+ ;; situation, the last article ID in the list implies that it,
;; and every article ID preceding it, have been fetched from the
;; server.
infos data))
(defun gnus-retrieve-group-data-early (gnus-command-method infos)
- "Start early async retrival of data from GNUS-COMMAND-METHOD."
+ "Start early async retrieval of data from GNUS-COMMAND-METHOD."
(when (stringp gnus-command-method)
(setq gnus-command-method (gnus-server-to-method gnus-command-method)))
(funcall (gnus-get-function gnus-command-method 'retrieve-group-data-early)
;; Cf. http://thread.gmane.org/v9lkng5nwy.fsf@marauder.physik.uni-ulm.de
"List of IBM codepage numbers.
-The codepage mappings slighly differ between IBM and other vendors.
+The codepage mappings slightly differ between IBM and other vendors.
See \"ftp://ftp.unicode.org/Public/MAPPINGS/VENDORS/IBM/README.TXT\".
If an element is a number corresponding to a supported windows
;; * nndiary-get-new-mail, nndiary-mail-source and nndiary-split-methods:
;; NNDiary has some experimental parts, in the sense Gnus normally uses only
-;; one mail back ends for mail retreival and splitting. This back end is
+;; one mail back ends for mail retrieval and splitting. This back end is
;; also an attempt to make it behave differently. For Gnus developers: as
;; you can see if you snarf into the code, that was not a very difficult
;; thing to do. Something should be done about the respooling breakage
(defvoo nndiary-get-new-mail nil
"Whether nndiary gets new mail and split it.
Contrary to traditional mail back ends, this variable can be set to t
-even if your primary mail back end also retreives mail. In such a case,
+even if your primary mail back end also retrieves mail. In such a case,
NDiary uses its own mail-sources and split-methods.")
(defvoo nndiary-nov-is-evil nil
;;; User Customizable Variables:
(defgroup nnir nil
- "Search groups in Gnus with assorted seach engines."
+ "Search groups in Gnus with assorted search engines."
:group 'gnus)
(defcustom nnir-ignored-newsgroups ""
;; We need nothing special to support English on Emacs. Selecting
;; English as a language environment is one of the ways to reset
-;; various multilingual environment to the original settting.
+;; various multilingual environment to the original setting.
;;; Code:
"Non-nil means that we have \"flists\".")
(defvar mh-index-data-file ".mhe_index"
- "MH-E specific file where index seach info is stored.")
+ "MH-E specific file where index search info is stored.")
(defvar mh-letter-header-field-regexp "^\\([A-Za-z][A-Za-z0-9-]*\\):")
mergedpat))
;; New pos from the start.
(newpos (length (completion-pcm--pattern->string pointpat)))
- ;; Do it afterwards because it changes `pointpat' by sideeffect.
+ ;; Do it afterwards because it changes `pointpat' by side effect.
(merged (completion-pcm--pattern->string (nreverse mergedpat))))
(setq suffix (completion--merge-suffix merged newpos suffix))
(rng-clear-cached-state remove-start (1- pos)))
;; sync up with cached validation state
(setq continue nil)
- ;; do this before settting rng-validate-up-to-date-end
+ ;; do this before setting rng-validate-up-to-date-end
;; in case we get a quit
(rng-mark-xmltok-errors)
(rng-mark-xmltok-dependent-regions)
(defcustom pgg-parse-symmetric-key-algorithm-alist
'((1 . IDEA) (2 . 3DES) (4 . CAST5) (5 . SAFER-SK128))
- "Alist of the assigned number to the simmetric key algorithm."
+ "Alist of the assigned number to the symmetric key algorithm."
:group 'pgg-parse
:type '(repeat
(cons (sexp :tag "Number") (sexp :tag "Type"))))
2011-07-28 Nicolas Goaziou <n.goaziou@gmail.com>
* org-capture.el (org-capture): If no file is associated to
- current buffer, check dired buffer and try to retreive a possibly
+ current buffer, check dired buffer and try to retrieve a possibly
directory associated.
2011-07-28 Eric Schulte <schulte.eric@gmail.com>
2011-07-28 Nicolas Goaziou <n.goaziou@gmail.com>
* org-latex.el (org-export-latex-preprocess): Rely on
- `org-export-footnotes-markers' to retreive definition of the
+ `org-export-footnotes-markers' to retrieve definition of the
current footnote during export.
2011-07-28 Nicolas Goaziou <n.goaziou@gmail.com>
pdffile)))
(defun org-babel-prep-session:latex (session params)
- "Return an error because LaTeX doesn't support sesstions."
+ "Return an error because LaTeX doesn't support sessions."
(error "LaTeX does not support sessions"))
(provide 'ob-latex)
(plist-get org-export-opt-plist
(intern (concat ":" key)))))
(save-match-data
- ;; If arguments are provided, first retreive them properly
+ ;; If arguments are provided, first retrieve them properly
;; (in ARGS, as a list), then replace them in VAL.
(when args
(setq args (org-split-string args ",") args2 nil)
nil nil nil nil nil
(list obj-box) ;; stair-landing
nil nil nil
- (list obj-axe) ;; smal-crawlspace
+ (list obj-axe) ;; small-crawlspace
nil nil nil nil nil nil nil nil nil nil nil nil nil nil nil
nil nil nil nil nil
(list obj-special) ;; fourth-vermont-intersection
(if (> pos c-state-nonlit-pos-cache-limit)
(setq c-state-nonlit-pos-cache-limit pos))
pos))))
-
+
(defun c-state-literal-at (here)
;; If position HERE is inside a literal, return (START . END), the
;; boundaries of the literal (which may be outside the accessible bit of the
;; buffer). Otherwise, return nil.
;;
;; This function is almost the same as `c-literal-limits'. Previously, it
- ;; differed in that it was a lower level function, and that it rigourously
+ ;; differed in that it was a lower level function, and that it rigorously
;; followed the syntax from BOB. `c-literal-limits' is now (2011-12)
;; virtually identical to this function.
(save-restriction
;; nested.
;;
;; This function is called indirectly from font locking stuff - either from
- ;; c-after-change (to prepare for after-change font-lockng) or from font
+ ;; c-after-change (to prepare for after-change font-locking) or from font
;; lock context (etc.) fontification.
(let ((lit-limits (c-literal-limits))
(new-pos pos)
;;
;;
;; void myfunc(T* p) {}
- ;;
+ ;;
;; Type a space in the first blank line, and the fontification of the next
;; line was fouled up by context fontification.
(let ((new-beg beg) (new-end end) new-region)
c-before-context-fontification-functions))))
(funcall c-standard-font-lock-fontify-region-function
new-beg new-end verbose)))
-
+
(defun c-after-font-lock-init ()
;; Put on `font-lock-mode-hook'. This function ensures our after-change
- ;; function will get excuted before the font-lock one. Amongst other
+ ;; function will get executed before the font-lock one. Amongst other
;; things.
(remove-hook 'after-change-functions 'c-after-change t)
(add-hook 'after-change-functions 'c-after-change nil t)
If point is on a keyword, help for that keyword will be shown. If
point is on a routine name or in the argument list of a routine, help
for that routine will be displayed. Works for system routines and
-keywords, it pulls up text help. For other routies and keywords,
+keywords, it pulls up text help. For other routines and keywords,
visits the source file, finding help in the header (if
`idlwave-help-source-try-header' is non-nil) or the routine definition
itself."
(defun prolog-clause-start (&optional not-allow-methods)
"Return the position at the start of the head of the current clause.
If NOTALLOWMETHODS is non-nil then do not match on methods in
-objects (relevent only if 'prolog-system' is set to 'sicstus)."
+objects (relevant only if 'prolog-system' is set to 'sicstus)."
(save-excursion
(let ((notdone t)
(retval (point-min)))
(defun prolog-clause-end (&optional not-allow-methods)
"Return the position at the end of the current clause.
If NOTALLOWMETHODS is non-nil then do not match on methods in
-objects (relevent only if 'prolog-system' is set to 'sicstus)."
+objects (relevant only if 'prolog-system' is set to 'sicstus)."
(save-excursion
(beginning-of-line) ; Necessary since we use "^...." for the search.
(if (re-search-forward
(let* ((speedbar-frame (speedbar-current-frame))
(fn (get-text-property (point) 'speedbar-function))
(tok (get-text-property (point) 'speedbar-token))
- ;; The 1-,+ is safe because scaning starts AFTER the point
+ ;; The 1-,+ is safe because scanning starts AFTER the point
;; specified. This lets the search include the character the
;; cursor is on.
(tp (previous-single-property-change
(message "No URL known."))
url)))
-;; We could combine multiple seach results with set operations
+;; We could combine multiple search results with set operations
;; AND, OR, MINUS, and NOT. Would this be useful?
;; How complicated are searches in real life?
;; We could also have other searches such as "publication year newer than...".
(defcustom reftex-highlight-selection 'cursor
"*Non-nil mean, highlight selected text in selection and *toc* buffers.
Normally, the text near the cursor is the selected text, and it is
-highlighted. This is the entry most keys in the selction and *toc*
+highlighted. This is the entry most keys in the selection and *toc*
buffers act on. However, if you mainly use the mouse to select an
item, you may find it nice to have mouse-triggered highlighting
instead or as well. The variable may have one of these values:
))
(defun rst-shift-region-right (pfxarg)
- "Indent region ridigly, by a few characters to the right.
+ "Indent region rigidly, by a few characters to the right.
This function first computes all possible alignment columns by
inspecting the lines preceding the region for bulleted or
enumerated list items. If the leftmost column is beyond the
(unless (or (not rev) (vc-cvs-valid-revision-number-p rev))
(if (not (vc-cvs-valid-symbolic-tag-name-p rev))
(error "%s is not a valid symbolic tag name" rev)
- ;; If the input revison is a valid symbolic tag name, we create it
+ ;; If the input revision is a valid symbolic tag name, we create it
;; as a branch, commit and switch to it.
(apply 'vc-cvs-command nil 0 files "tag" "-b" (list rev))
(apply 'vc-cvs-command nil 0 files "update" "-r" (list rev))
(unless contents-done
(vc-mtn-command nil 0 file "revert")))
-;; (defun vc-mtn-roolback (files)
+;; (defun vc-mtn-rollback (files)
;; )
(defun vc-mtn-print-log (files buffer &optional shortlog start-revision limit)
Note that this function gives the paragraph separator the same
direction as the preceding paragraph, even though Emacs generally
- views the separartor as not belonging to any paragraph. */
+ views the separator as not belonging to any paragraph. */
void
bidi_paragraph_init (bidi_dir_t dir, struct bidi_it *bidi_it, int no_default_p)
{
/* Base64-decode the data at FROM of LENGTH bytes into TO. If
MULTIBYTE is nonzero, the decoded result should be in multibyte
- form. If NCHARS_RETRUN is not NULL, store the number of produced
+ form. If NCHARS_RETURN is not NULL, store the number of produced
characters in *NCHARS_RETURN. */
static EMACS_INT
Lisp_Object type;
/* 1 iff the font's foundry, family, and adstyle names are case
- sensitve. */
+ sensitive. */
int case_sensitive;
/* Return a cache of font-entities on frame F. The cache must be a
|| (NILP (buffer) && NILP (BVAR (&buffer_defaults, enable_multibyte_characters))))
/* We dare not decode end-of-line format by setting VAL to
Qraw_text, because the existing Emacs Lisp libraries
- assume that they receive bare code including a sequene of
+ assume that they receive bare code including a sequence of
CR LF. */
val = Qnil;
else
checking if we can use boyer-moore search. If TRT is
non-nil, we can use boyer-moore search only if TRT can be
represented by the byte array of 256 elements. For that,
- all non-ASCII case-equivalents of all case-senstive
+ all non-ASCII case-equivalents of all case-sensitive
characters in STRING must belong to the same charset and
row. */
if (whole)
{
/* Position scroll bar at rock bottom if the bottom of the
- buffer is visible. This avoids shinking the thumb away
+ buffer is visible. This avoids shrinking the thumb away
to nothing if it is held at the bottom of the buffer. */
if (position + portion >= whole && !draggingp)
{
/* Non-zero means we've seen at least one glyph that came from a
display string. */
int string_seen = 0;
- /* Largest and smalles buffer positions seen so far during scan of
+ /* Largest and smallest buffer positions seen so far during scan of
glyph row. */
EMACS_INT bpos_max = pos_before;
EMACS_INT bpos_min = pos_after;
HCoop / bpt / emacs.git / commitdiff