-#
-# Maintenance productions for the Lisp directory
-#
-
-SHELL = /bin/sh
-
-lisp=@srcdir@
-VPATH=@srcdir@
-srcdir=@srcdir@/..
-
-# You can specify a different executable on the make command line,
-# e.g. "make EMACS=../src/emacs ...".
-
-EMACS = ../src/emacs
-
-# Command line flags for Emacs. This must include --multibyte,
-# otherwise some files will not compile.
-
-EMACSOPT = -batch --no-site-file --multibyte
-
-SOURCES = *.el COPYING Makefile
-lisptagsfiles1 = $(lisp)/[a-zA-Z]*.el
-lisptagsfiles2 = $(lisp)/[a-zA-Z]*/[a-zA-Z]*.el
-ETAGS = ../lib-src/etags
-
-# Files which should not be compiled. If you change the name `DONTCOMPILE'
-# to something different, you'll have to change make-dist as well.
-#
-# - emacs-lisp/cl-specs.el: only contains `def-edebug-spec's so there's
-# no point compiling it, although it doesn't hurt.
-
-DONTCOMPILE = \
- $(lisp)/bindings.el \
- $(lisp)/cus-load.el \
- $(lisp)/cus-start.el \
- $(lisp)/emacs-lisp/cl-specs.el \
- $(lisp)/eshell/esh-maint.el \
- $(lisp)/eshell/esh-groups.el \
- $(lisp)/finder-inf.el \
- $(lisp)/forms-d2.el \
- $(lisp)/forms-pass.el \
- $(lisp)/generic-x.el \
- $(lisp)/international/latin-1.el \
- $(lisp)/international/latin-2.el \
- $(lisp)/international/latin-3.el \
- $(lisp)/international/latin-4.el \
- $(lisp)/international/latin-5.el \
- $(lisp)/international/latin-8.el \
- $(lisp)/international/latin-9.el \
- $(lisp)/international/mule-conf.el \
- $(lisp)/loaddefs.el \
- $(lisp)/loadup.el \
- $(lisp)/mail/blessmail.el \
- $(lisp)/mail/sc.el \
- $(lisp)/patcomp.el \
- $(lisp)/paths.el \
- $(lisp)/play/bruce.el \
- $(lisp)/subdirs.el \
- $(lisp)/term/internal.el \
- $(lisp)/version.el
-
-# Files to compile before others during a bootstrap. This is done
-# to speed up the bootstrap process.
-
-COMPILE_FIRST = \
- $(lisp)/emacs-lisp/byte-opt.el \
- $(lisp)/emacs-lisp/bytecomp.el \
- $(lisp)/subr.el
-
-# The actual Emacs command run in the targets below.
-
-emacs = $(EMACS) $(EMACSOPT)
-
-# Common command to find subdirectories
-
-setwins=subdirs=`find $$wd -type d -print`; \
- for file in $$subdirs; do \
- case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
- *) wins="$$wins $$file" ;; \
- esac; \
- done
-
-doit:
-
-cus-load.el:
- touch $@
-custom-deps: cus-load.el doit
- wd=$(lisp); $(setwins); \
- echo Directories: $$wins; \
- $(emacs) -l cus-dep -f custom-make-dependencies $$wins
-
-finder-inf.el:
- echo "(provide 'finder-inf)" >> $@
-finder-data: finder-inf.el doit
- wd=$(lisp); $(setwins); \
- echo Directories: $$wins; \
- $(emacs) -l finder -f finder-compile-keywords-make-dist $$wins
-
-loaddefs.el:
- echo ";;; loaddefs.el --- automatically extracted autoloads" >> $@
- echo ";;" >> $@; echo ";;; Code:" >> $@
- echo "\f" >> $@
- echo ";;; Local Variables:" >> $@
- echo ";;; version-control: never" >> $@
- echo ";;; no-byte-compile: t" >> $@
- echo ";;; no-update-autoloads: t" >> $@
- echo ";;; End:" >> $@
- echo ";;; loaddefs.el ends here" >> $@
-autoloads: loaddefs.el doit
- wd=$(lisp); $(setwins); \
- echo Directories: $$wins; \
- $(emacs) -l autoload --eval '(setq generated-autoload-file "$(lisp)/loaddefs.el")' -f batch-update-autoloads $$wins
-
-subdirs.el:
- $(MAKE) $(MFLAGS) update-subdirs
-update-subdirs: doit
- wd=$(lisp); $(setwins); \
- for file in $$wins; do \
- $(srcdir)/update-subdirs $$file; \
- done;
-
-updates: update-subdirs autoloads finder-data custom-deps
-
-# Update the AUTHORS file.
-
-update-authors:
- EMACSLOADPATH=$(lisp) $(emacs) -f batch-update-authors $(srcdir)/AUTHORS $(srcdir)
-
-TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
- ${ETAGS} $(lisptagsfiles1) $(lisptagsfiles2)
-
-TAGS-LISP: $(lisptagsfiles1) $(lisptagsfiles2)
- ${ETAGS} -o TAGS-LISP $(lisptagsfiles1) $(lisptagsfiles2)
-
-.el.elc: subdirs.el
- -EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $<
-
-$(DONTCOMPILE:.el=.elc):
- -rm -f $@
-
-# Compile all Lisp files, except those from DONTCOMPILE. This
-# compiles files unconditionally. All .elc files are made writable
-# before compilation in case we checked out read-only (CVS option -r).
-# Files MUST be compiled one by one. If we compile several files in a
-# row we can't make sure that the compilation environment is clean.
-# We also set the load-path of the Emacs used for compilation to the
-# current directory and its subdirectories, to make sure require's and
-# load's in the files being compiled find the right files.
-
-compile-files: subdirs.el doit
- find $(lisp) -name "*.elc" -print | xargs chmod +w; \
- wd=$(lisp); $(setwins); \
- elpat=`echo $$wins | tr ' ' '\012\012' | \
- sed -e 's|\(.\)$$|\1/|' -e 's|^\./||' -e 's|$$|*.el|'`; \
- els=`echo $$elpat $(DONTCOMPILE) $(COMPILE_FIRST) | \
- tr ' ' '\012\012' | sort | uniq -u`; \
- for el in $(COMPILE_FIRST) $$els; do \
- echo Compiling $$el; \
- EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
- done
-
-# Backup compiled Lisp files in elc.tar.gz. If that file already
-# exists, make a backup of it.
-
-backup-compiled-files:
- -mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
- -tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
-
-# Compile Lisp files, but save old compiled files first.
-
-compile: backup-compiled-files compile-files
-
-# Recompile all Lisp files which are newer than their .elc files.
-# Note that this doesn't create .elc files. It only recompiles if an
-# .elc is present.
-
-recompile: doit
- $(emacs) -f batch-byte-recompile-directory $(lisp)
-
-# Prepare a bootstrap in the lisp subdirectory. Build loaddefs.el,
-# because it's not sure it's up-to-date, and if it's not, that might
-# lead to errors during the bootstrap because something fails to
-# autoload as expected. Remove compiled Lisp files so that
-# bootstrap-emacs will be built from sources only.
-
-bootstrap-clean:
- if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi
- -rm -f $(lisp)/*.elc $(lisp)/*/*.elc
-
-# Generate/update files for the bootstrap process.
-
-bootstrap: autoloads compile-files custom-deps
-
-distclean:
- -rm -f $(lisp)/Makefile
-
-# Makefile ends here.
+# Maintenance productions for the Lisp directory
+# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005,
+# 2006, 2007 Free Software Foundation, Inc.
+
+# This file is part of GNU Emacs.
+
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301, USA.
+
+SHELL = /bin/sh
+
+lisp=@srcdir@
+VPATH=@srcdir@
+srcdir=@srcdir@/..
+
+# You can specify a different executable on the make command line,
+# e.g. "make EMACS=../src/emacs ...".
+
+EMACS = ../src/emacs
+
+# Command line flags for Emacs. This must include --multibyte,
+# otherwise some files will not compile.
+
+EMACSOPT = -batch --no-site-file --multibyte
+
+SOURCES = *.el COPYING Makefile
+lisptagsfiles1 = $(lisp)/[a-zA-Z]*.el
+lisptagsfiles2 = $(lisp)/[a-zA-Z]*/[a-zA-Z]*.el
+ETAGS = ../lib-src/etags
+
+# Elisp files auto-generated.
+AUTOGENEL = loaddefs.el \
+ cus-load.el \
+ finder-inf.el \
+ subdirs.el \
+ eshell/esh-groups.el \
+ mh-e/mh-loaddefs.el
+
+# Files to compile before others during a bootstrap. This is done to
+# speed up the bootstrap process. The CC files are compiled first
+# because CC mode tweaks the compilation process, and requiring
+# cc-mode when it is not compiled doesn't work during the
+# bootstrapping.
+
+COMPILE_FIRST = \
+ $(lisp)/emacs-lisp/byte-opt.el \
+ $(lisp)/emacs-lisp/bytecomp.el \
+ $(lisp)/subr.el \
+ $(lisp)/progmodes/cc-mode.el \
+ $(lisp)/progmodes/cc-vars.el
+
+# The actual Emacs command run in the targets below.
+
+emacs = EMACSLOADPATH=$(lisp) $(EMACS) $(EMACSOPT)
+
+# Common command to find subdirectories
+
+setwins=subdirs=`(cd $$wd; find . -type d -print)`; \
+ for file in $$subdirs; do \
+ case $$file in */Old | */RCS | */CVS | */CVS/* | */.* | */.*/* | */=* ) ;; \
+ *) wins="$$wins $$wd/$$file" ;; \
+ esac; \
+ done
+
+# Find all subdirectories except `obsolete'.
+
+setwins_almost=subdirs=`(cd $$wd; find . -type d -print)`; \
+ for file in $$subdirs; do \
+ case $$file in */Old | */RCS | */CVS | */CVS/* | */.* | */.*/* | */=* | */obsolete | */term ) ;; \
+ *) wins="$$wins $$wd/$$file" ;; \
+ esac; \
+ done
+
+doit:
+
+$(lisp)/cus-load.el:
+ touch $@
+custom-deps: $(lisp)/subdirs.el $(lisp)/loaddefs.el $(lisp)/cus-load.el doit
+ wd=$(lisp); $(setwins_almost); \
+ echo Directories: $$wins; \
+ $(EMACS) $(EMACSOPT) -l cus-dep --eval '(setq generated-custom-dependencies-file "$(lisp)/cus-load.el")' -f custom-make-dependencies $$wins
+
+finder-data: $(lisp)/subdirs.el $(lisp)/loaddefs.el doit
+ wd=$(lisp); $(setwins_almost); \
+ echo Directories: $$wins; \
+ $(EMACS) $(EMACSOPT) -l finder --eval '(setq generated-finder-keywords-file "$(lisp)/finder-inf.el")' -f finder-compile-keywords-make-dist $$wins
+
+$(lisp)/loaddefs.el:
+ echo ";;; loaddefs.el --- automatically extracted autoloads" >> $@
+ echo ";;" >> $@; echo ";;; Code:" >> $@
+ echo "\f" >> $@
+ echo ";; Local Variables:" >> $@
+ echo ";; version-control: never" >> $@
+ echo ";; no-byte-compile: t" >> $@
+ echo ";; no-update-autoloads: t" >> $@
+ echo ";; End:" >> $@
+ echo ";;; loaddefs.el ends here" >> $@
+autoloads: $(lisp)/subdirs.el $(lisp)/loaddefs.el doit
+ wd=$(lisp); $(setwins_almost); \
+ echo Directories: $$wins; \
+ $(EMACS) $(EMACSOPT) -l autoload --eval '(setq generated-autoload-file "$(lisp)/loaddefs.el")' -f batch-update-autoloads $$wins
+
+$(lisp)/subdirs.el:
+ $(MAKE) $(MFLAGS) update-subdirs
+update-subdirs: doit
+ wd=$(lisp); $(setwins); \
+ for file in $$wins; do \
+ $(srcdir)/update-subdirs $$file; \
+ done;
+
+updates: update-subdirs autoloads finder-data custom-deps
+
+# This is useful after "cvs up".
+cvs-update: recompile autoloads finder-data custom-deps
+
+# Update the AUTHORS file.
+
+update-authors:
+ $(emacs) -l authors -f batch-update-authors $(srcdir)/AUTHORS $(srcdir)
+
+TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
+ els=`echo $(lisptagsfiles1) $(lisptagsfiles2) | sed -e "s,$(lisp)/loaddefs[^ ]*,," -e "s,$(lisp)/ldefs-boot[^ ]*,,"`; \
+ ${ETAGS} $$els
+
+TAGS-LISP: $(lisptagsfiles1) $(lisptagsfiles2)
+ els=`echo $(lisptagsfiles1) $(lisptagsfiles2) | sed -e "s,$(lisp)/loaddefs[^ ]*,," -e "s,$(lisp)/ldefs-boot[^ ]*,,"`; \
+ ${ETAGS} -o TAGS-LISP $$els
+
+.SUFFIXES: .elc .el
+
+.el.elc: $(lisp)/subdirs.el
+ -$(emacs) -f batch-byte-compile $<
+
+# Compile all Lisp files, but don't recompile those that are up to
+# date. Some files don't actually get compiled because they set the
+# local variable no-byte-compile.
+
+# All .elc files are made writable before compilation in case we
+# checked out read-only (CVS option -r). Files MUST be compiled one by
+# one. If we compile several files in a row we can't make sure that
+# the compilation environment is clean. We also set the load-path of
+# the Emacs used for compilation to the current directory and its
+# subdirectories, to make sure require's and load's in the files being
+# compiled find the right files.
+
+# `|| true' below prevents old Bash versions from getting confused
+# by an error.
+compile: $(lisp)/subdirs.el mh-autoloads doit
+ find $(lisp) -name "*.elc" -print | xargs chmod +w >/dev/null 2>&1 || true; \
+ wd=$(lisp); $(setwins); \
+ els=`echo $$wins | tr ' \011' '\012\012' | \
+ sed -e 's|\(.\)$$|\1/|' -e 's|^\./||' -e 's|$$|*.el|'`; \
+ for el in $(COMPILE_FIRST) $$els; do \
+ if test -f $$el; \
+ then \
+ echo Compiling $$el; \
+ $(emacs) -f batch-byte-compile-if-not-done $$el || exit 1; \
+ fi \
+ done
+
+# Compile all Lisp files. This is like `compile' but compiles files
+# unconditionally. Some files don't actually get compiled because they
+# set the local variable no-byte-compile.
+
+compile-always: $(lisp)/subdirs.el mh-autoloads doit
+ # `|| true' prevents old Bash versions from getting confused
+ # by an error.
+ find $(lisp) -name "*.elc" -print | xargs chmod +w >/dev/null 2>&1 || true; \
+ wd=$(lisp); $(setwins); \
+ els=`echo $$wins | tr ' \011' '\012\012' | \
+ sed -e 's|\(.\)$$|\1/|' -e 's|^\./||' -e 's|$$|*.el|'`; \
+ for el in $(COMPILE_FIRST) $$els; do \
+ if test -f $$el; \
+ then \
+ echo Compiling $$el; \
+ $(emacs) -f batch-byte-compile $$el || exit 1; \
+ fi \
+ done
+
+compile-calc:
+ for el in `find $(lisp)/calc -name '*.el'`; do \
+ echo Compiling $$el; \
+ $(emacs) -f batch-byte-compile $$el || exit 1; \
+ done
+
+# Backup compiled Lisp files in elc.tar.gz. If that file already
+# exists, make a backup of it.
+
+backup-compiled-files:
+ -mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
+ -tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Compile Lisp files, but save old compiled files first.
+
+compile-after-backup: backup-compiled-files compile-always
+
+# Recompile all Lisp files which are newer than their .elc files and compile
+# new ones.
+
+recompile: doit mh-autoloads $(lisp)/progmodes/cc-mode.elc
+ $(EMACS) $(EMACSOPT) --eval "(batch-byte-recompile-directory 0)" $(lisp)
+
+# CC Mode uses a compile time macro system which causes a compile time
+# dependency in cc-mode.elc on the macros in cc-langs.el and the
+# version string in cc-defs.el.
+$(lisp)/progmodes/cc-mode.elc: \
+ $(lisp)/progmodes/cc-mode.el \
+ $(lisp)/progmodes/cc-langs.el \
+ $(lisp)/progmodes/cc-defs.el
+ $(EMACS) $(EMACSOPT) -f batch-byte-compile $(lisp)/progmodes/cc-mode.el
+
+# Update MH-E internal autoloads. These are not to be confused with
+# the autoloads for the MH-E entry points, which are already in
+# loaddefs.el.
+MH_E_SRC = $(lisp)/mh-e/mh-acros.el $(lisp)/mh-e/mh-alias.el \
+ $(lisp)/mh-e/mh-buffers.el $(lisp)/mh-e/mh-compat.el \
+ $(lisp)/mh-e/mh-comp.el $(lisp)/mh-e/mh-e.el \
+ $(lisp)/mh-e/mh-folder.el $(lisp)/mh-e/mh-funcs.el \
+ $(lisp)/mh-e/mh-gnus.el $(lisp)/mh-e/mh-identity.el \
+ $(lisp)/mh-e/mh-inc.el $(lisp)/mh-e/mh-junk.el \
+ $(lisp)/mh-e/mh-letter.el $(lisp)/mh-e/mh-limit.el \
+ $(lisp)/mh-e/mh-mime.el $(lisp)/mh-e/mh-print.el \
+ $(lisp)/mh-e/mh-scan.el $(lisp)/mh-e/mh-search.el \
+ $(lisp)/mh-e/mh-seq.el $(lisp)/mh-e/mh-show.el \
+ $(lisp)/mh-e/mh-speed.el $(lisp)/mh-e/mh-thread.el \
+ $(lisp)/mh-e/mh-tool-bar.el $(lisp)/mh-e/mh-utils.el \
+ $(lisp)/mh-e/mh-xface.el
+
+mh-autoloads: $(lisp)/mh-e/mh-loaddefs.el
+$(lisp)/mh-e/mh-loaddefs.el: $(MH_E_SRC)
+ echo ";;; mh-loaddefs.el --- automatically extracted autoloads" > $@
+ echo "" >> $@
+ echo ";; Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc." >> $@
+ echo ";; Author: Bill Wohler <wohler@newt.com>" >> $@
+ echo ";; Keywords: mail" >> $@
+ echo ";;; Commentary:" >> $@
+ echo ";;; Change Log:" >> $@
+ echo ";;; Code:" >> $@
+ echo "\f" >> $@
+ echo "(provide 'mh-loaddefs)" >> $@
+ echo ";; Local Variables:" >> $@
+ echo ";; version-control: never" >> $@
+ echo ";; no-byte-compile: t" >> $@
+ echo ";; no-update-autoloads: t" >> $@
+ echo ";; End:" >> $@
+ echo ";;; mh-loaddefs.el ends here" >> $@
+ $(EMACS) $(EMACSOPT) \
+ -l autoload \
+ --eval "(setq generate-autoload-cookie \";;;###mh-autoload\")" \
+ --eval "(setq generated-autoload-file \"$(lisp)/mh-e/mh-loaddefs.el\")" \
+ --eval "(setq make-backup-files nil)" \
+ -f batch-update-autoloads $(lisp)/mh-e
+
+# Prepare a bootstrap in the lisp subdirectory.
+#
+# Build loaddefs.el to make sure it's up-to-date. If it's not, that
+# might lead to errors during the bootstrap because something fails to
+# autoload as expected. If there is no emacs binary, then we can't
+# build autoloads yet. In that case we have to use ldefs-boot.el.
+# Bootstrap should always work with ldefs-boot.el. Therefore,
+# whenever a new autoload cookie gets added that is necessary during
+# bootstrapping, ldefs-boot.el should be updated by overwriting it with
+# an up-to-date copy of loaddefs.el that is uncorrupted by
+# local changes. (Because loaddefs.el is an automatically generated
+# file, we don't want to store it in the source repository).
+
+bootstrap-prepare:
+ if test -x $(EMACS); then \
+ $(MAKE) $(MFLAGS) autoloads; \
+ else \
+ cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el; \
+ fi
+
+maintainer-clean: distclean
+ cd $(lisp); rm -f *.elc */*.elc $(AUTOGENEL)
+
+bootstrap-clean:
+ cd $(lisp); rm -f *.elc */*.elc
+
+# Generate/update files for the bootstrap process.
+
+bootstrap: update-subdirs autoloads compile
+
+# Generate/update files after the bootstrap process.
+# custom-deps needs `preloaded-file-list'.
+
+bootstrap-after: finder-data custom-deps
+
+distclean:
+ -rm -f ./Makefile
+
+# Makefile ends here.
HCoop / bpt / emacs.git / blobdiff