# `make distclean' should leave only the files that were in the
# distribution.
#
-# make realclean
+# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: C source files
# Still more severe - delete backup and autosave files, too.
SHELL = /bin/sh
-MAKE = make # BSD doesn't have it as a default.
+
+# If Make doesn't predefine MAKE, set it here.
+@SET_MAKE@
# ==================== Things `configure' Might Edit ====================
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
-### Libraries which should be edited into lib-src/Makefile.
-libsrc_libs=@libsrc_libs@
-
# ==================== Where To Install Things ====================
# The default location for installation. Everything is placed in
# runs. These files are all architecture-independent. Right now, the
# only such data is the locking directory; ${lockdir} is a
# subdirectory of this.
-statedir=@statedir@
+sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data. ${archlibdir} is a subdirectory of this.
-libdir=${exec_prefix}/lib
+libexecdir=@libexecdir@
# Where to install Emacs's man pages, and what extension they should have.
mandir=@mandir@
manext=.1
+man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# system, it is inappropriate to imply that it is part of Emacs.
infodir=@infodir@
+# Where to look for bitmap files.
+bitmapdir=@bitmapdir@
+
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# building. This is only used during the process of
# compiling Emacs, to help Emacs find its lisp files
# before they've been installed in their final location.
-# It's usually identical to lisppath, except that the
+# It's usually identical to lisppath, except that
+# it does not include locallisppath, and the
# entry for the directory containing the installed lisp
# files has been replaced with ../lisp. This should be a
# colon-separated list of directories.
# once.
archlibdir=@archlibdir@
+# Where to put the docstring file.
+docdir=@docdir@
+
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
# ============================= Targets ==============================
+# What emacs should be called when installed.
+EMACS = emacs
+
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
SUBDIR = lib-src src
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile
+SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = ${etcdir} ${lispdir}
-all: src/paths.h ${SUBDIR}
+all: paths-force ${SUBDIR}
-removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/'
+removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
+
+# Note that sed is not in /bin on 386bsd.
+src/paths.h: Makefile ${srcdir}/src/paths.in
+ @echo "Producing \`src/paths.h' from \`src/paths.in'."
+ @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
+ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
+ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
+ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
+ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
+ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
+ -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
+ -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
+ ${srcdir}/move-if-change paths.h.$$$$ src/paths.h
-# We force the rebuilding of src/paths.h because the user might give
+# For `make all',
+# we force the rebuilding of src/paths.h because the user might give
# make different values for the various directories. Since we use
# move-if-change, src/paths.h only actually changes if the user did
# something notable, so the only unnecessary work we do is in building
-# src/paths.h.tmp, which isn't much.
+# paths.h.$$, which isn't much.
# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC.src.paths.h
- @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+# We depend on src/paths.h here to prevent simultaneous execution of
+# that rule and this one, in a parallel make.
+# It is possible for paths.h to be updated twice--but that would happen anyway.
+paths-force: FRC src/paths.h
+ @echo "Producing \`src/paths.h' from \`src/paths.in'."
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \
+ sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
- @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
+ -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
+ -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
+ ${srcdir}/move-if-change paths.h.$$$$ src/paths.h
-src: lib-src FRC.src
-lib-src: FRC.lib-src
+src: lib-src FRC src/paths.h
+
+# This ought to depend on src/paths.h, so that in parallel make
+# src/paths.h will be available for the compilations in lib-src.
+# But that causes trouble in `make install' if a different prefix
+# is specified at that time.
+lib-src: FRC src/paths.h
.RECURSIVE: ${SUBDIR}
${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
cd $@; $(MAKE) all $(MFLAGS) \
- CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}'
+ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
+ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
+
+blessmail: ${SUBDIR_MAKEFILES} src FRC
+ cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
+ MAKE='${MAKE}' archlibdir='$(archlibdir)'
Makefile: Makefile.in config.status
./config.status
-src/Makefile: src/Makefile.in.in config.status
+src/Makefile: src/Makefile.in config.status
./config.status
lib-src/Makefile: lib-src/Makefile.in config.status
oldXMenu/Makefile: oldXMenu/Makefile.in config.status
./config.status
+lwlib/Makefile: lwlib/Makefile.in config.status
+ ./config.status
+
# ==================== Installation ====================
## If we let lib-src do its own installation, that means we
## On AIX, use tar xBf.
## On Xenix, use tar xpf.
+.PHONY: install mkdir
+
## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
-install: all do-install
-
-### Note that we copy the DOC-* files from the build etc directory
-### as well as lots of things from ${srcdir}/etc.
-do-install: mkdir
+## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
+## ever modify src/paths.h.
+### We do install-arch-indep first because
+### the executable needs the Lisp files and DOC file to work properly.
+install: ${SUBDIR} install-arch-indep install-arch-dep blessmail
+ @true
+
+### Install the executables that were compiled specifically for this machine.
+### It would be nice to do something for a parallel make
+### to ensure that install-arch-indep finishes before this starts.
+install-arch-dep: mkdir
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
- exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
- archlibdir=${archlibdir})
+ exec_prefix=${exec_prefix} bindir=${bindir} \
+ libexecdir=${libexecdir} archlibdir=${archlibdir})
+ ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
+ -chmod 1755 ${bindir}/emacs-${version}
+ rm -f ${bindir}/$(EMACS)
+ -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
+
+### Install the files that are machine-independent.
+### Most of them come straight from the distribution;
+### the exception is the DOC-* files, which are copied
+### from the build directory.
+
+### Note that we copy DOC* and then delete DOC
+### as a workaround for a bug in tar on Ultrix 4.2.
+install-arch-indep: mkdir
-set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && pwd)` != `(cd $${dir} && pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
- done
+ for dir in ${COPYDIR} ; do \
+ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
+ rm -rf $$1 ; \
+ fi ; \
+ shift ; \
+ done
-set ${COPYDESTS} ; \
- mkdir ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir}..." ; \
- (cd $${dir}; tar -cf - . )|(cd $${dest};umask 0; tar -xvf - ); \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -rf $${subdir}/CVS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done) ; \
- done
- if [ `(cd ./etc; /bin/pwd)` != `(cd ${srcdir}/etc; /bin/pwd)` ]; \
+ mkdir ${COPYDESTS} ; \
+ chmod ugo+rx ${COPYDESTS} ; \
+ for dir in ${COPYDIR} ; do \
+ dest=$$1 ; shift ; \
+ [ -d $${dir} ] \
+ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
+ && (echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
+ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
+ rm -rf $${subdir}/RCS ; \
+ rm -rf $${subdir}/CVS ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/[mM]akefile* ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ rm -f $${subdir}/dired.todo ; \
+ done) ; \
+ done
+ -rm -f ${lispdir}/subdirs.el
+ $(srcdir)/update-subdirs ${lispdir}
+ -chmod -R a+r ${COPYDESTS}
+ if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
then \
- echo "Copying etc/DOC* ..." ; \
- (cd etc; tar -cf - DOC*)|(cd ${etcdir}; umask 0; tar -xvf - ); \
+ echo "Copying etc/DOC-* to ${docdir} ..." ; \
+ (cd ./etc; tar -cf - DOC*)|(cd ${docdir}; umask 0; tar -xvf - ); \
+ (cd $(docdir); chmod a+r DOC*; rm DOC) \
else true; fi
+ if [ -r ./lisp ] \
+ && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \
+ && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
+ then \
+ echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
+ (cd lisp; tar -cf - *.el *.elc)|(cd ${lispdir}; umask 0; tar -xvf - ); \
+ else true; fi
+ thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
- then (cd ${srcdir}/info ; \
- if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
- ${INSTALL_DATA} dir ${infodir}/dir ; \
- fi ; \
- for f in cl* emacs* forms* gnus* info* sc* vip* ; do \
- ${INSTALL_DATA} $$f ${infodir}/$$f ; \
- done); \
+ then \
+ (cd ${infodir}; \
+ if [ -f dir ]; then \
+ if [ ! -f dir.old ]; then mv -f dir dir.old; \
+ else mv -f dir dir.bak; fi; \
+ fi; \
+ cd ${srcdir}/info ; \
+ (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
+ (cd $${thisdir}; chmod a+r ${infodir}/dir); \
+ for f in ccmode* cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
+ chmod a+r ${infodir}/$$f); \
+ done); \
else true; fi
- cd ${srcdir}/etc; for page in emacs etags ctags ; do \
- ${INSTALL_DATA} $${page}.1 ${mandir}/$${page}${manext} ; \
+ thisdir=`/bin/pwd`; \
+ cd ${srcdir}/etc; \
+ for page in emacs etags ctags ; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
+ chmod a+r ${man1dir}/$${page}${manext}); \
done
- ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
- -chmod 1755 ${bindir}/emacs-${version}
- rm -f ${bindir}/emacs
- -ln ${bindir}/emacs-${version} ${bindir}/emacs
+
+### Build Emacs and install it, stripping binaries while installing them.
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
-### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
-### instead of mkdir. Not all systems' mkdirs have the `-p' flag.
-mkdir: FRC.mkdir
- ./lib-src/make-path ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
- ${bindir} ${datadir} ${libdir} \
- `echo ${locallisppath} | sed 's/:/ /'`
- chmod 777 ${COPYDESTS} ${lockdir}
+### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
+### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
+mkdir: FRC
+ $(srcdir)/mkinstalldirs ${COPYDESTS} ${lockdir} ${infodir} ${man1dir} \
+ ${bindir} ${datadir} ${docdir} ${libexecdir} \
+ `echo ${locallisppath} | sed 's/:/ /g'`
+ -chmod a+rwx ${lockdir}
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would
(cd lib-src; \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
for dir in ${lispdir} ${etcdir} ; do \
- case `(cd $${dir} ; pwd)` in \
- `(cd ${srcdir} ; pwd)`* ) ;; \
- * ) rm -rf $${dir} ;; \
- esac ; \
- case $${dir} in \
- ${datadir}/emacs/${version}/* ) \
- rm -rf ${datadir}/emacs/${version} \
- ;; \
- esac ; \
+ if [ -d $${dir} ]; then \
+ case `(cd $${dir} ; /bin/pwd)` in \
+ `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
+ * ) rm -rf $${dir} ;; \
+ esac ; \
+ case $${dir} in \
+ ${datadir}/emacs/${version}/* ) \
+ rm -rf ${datadir}/emacs/${version} \
+ ;; \
+ esac ; \
+ fi ; \
done
- (cd ${infodir}; rm -f cl* emacs* forms* info* vip*)
- (cd ${mandir}; rm -f emacs.1 etags.1 ctags.1)
- (cd ${bindir}; rm -f emacs-${version} emacs)
+ (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
+ (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1)
+ (cd ${bindir} && rm -f emacs-${version} $(EMACS))
-### Some makes seem to remember that they've built something called FRC,
-### so you can only use a given FRC once per makefile.
-FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.mkdir:
-FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean:
+FRC:
# ==================== Cleaning up and miscellanea ====================
+.PHONY: mostlyclean clean distclean maintainer-clean extraclean
+
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
### normally don't want to recompile. For example, the `mostlyclean'
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
-mostlyclean: FRC.mostlyclean
+mostlyclean: FRC
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
- -(cd man; $(MAKE) $(MFLAGS) mostlyclean)
+ -(cd man && $(MAKE) $(MFLAGS) mostlyclean)
### `clean'
### Delete all files from the current directory that are normally
### with them.
###
### Delete `.dvi' files here if they are not part of the distribution.
-clean: FRC.clean
+clean: FRC
(cd src; $(MAKE) $(MFLAGS) clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
+ (cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
- -(cd man; $(MAKE) $(MFLAGS) clean)
+ -(cd man && $(MAKE) $(MFLAGS) clean)
### `distclean'
### Delete all files from the current directory that are created by
### `make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
- rm -f config.status build-install ; \
+ rm -f config.status config.cache config.log ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
- (cd lock ; rm -f *)
-distclean: FRC.distclean
+ (cd lock && (rm * || true))
+distclean: FRC
(cd src; $(MAKE) $(MFLAGS) distclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
- (cd man; $(MAKE) $(MFLAGS) distclean)
+ (cd man && $(MAKE) $(MFLAGS) distclean)
${top_distclean}
-
-### `realclean'
+### `maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
-### One exception, however: `make realclean' should not delete
+### One exception, however: `make maintainer-clean' should not delete
### `configure' even if `configure' can be remade using a rule in the
-### Makefile. More generally, `make realclean' should not delete
+### Makefile. More generally, `make maintainer-clean' should not delete
### anything that needs to exist in order to run `configure' and then
### begin to build the program.
-realclean: FRC.realclean
- (cd src; $(MAKE) $(MFLAGS) realclean)
- (cd oldXMenu; $(MAKE) $(MFLAGS) realclean)
- (cd lib-src; $(MAKE) $(MFLAGS) realclean)
- -(cd man; $(MAKE) $(MFLAGS) realclean)
+maintainer-clean: FRC
+ (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
+ -(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
### it deletes backup and autosave files too.
extraclean:
for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
- -(cd lock; rm *)
- -rm config.status config-tmp-*
+ ${top_distclean}
+ -rm config-tmp-*
-rm -f *~ \#*
### Unlocking and relocking. The idea of these productions is to reduce
### and VC will swiftly let you know if this happens, and it is easily
### corrected.
SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
- README build-install.in configure make-dist move-if-change
+ README configure make-dist move-if-change
+
+.PHONY: unlock relock
unlock:
chmod u+w $(SOURCES) cpp/*
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
+ (cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) unlock)
relock:
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
+ (cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) relock)
TAGS tags: lib-src
- (cd ${srcdir}/src; \
- ../lib-src/etags *.[ch] ../lisp/*.el ../lisp/term/*.el)
+ cd ${srcdir}/src; $(MAKE) tags
check:
@echo "We don't have any tests for GNU Emacs yet."
dist:
+ $(srcdir)/update-subdirs ${srcdir}/lisp
cd ${srcdir}; make-dist
-info:
+.PHONY: info dvi dist check
+force-info:
+info: force-info
(cd ${srcdir}/man; $(MAKE) $(MFLAGS) info)
dvi:
- (cd ${srcdir}/man; $(MAKE) $(MFLAGS) dvi)
+ (cd man; $(MAKE) $(MFLAGS) dvi)
HCoop / bpt / emacs.git / blobdiff