(struct buffer): Move `undo_list' back to before `name'.
[bpt/emacs.git] / configure.in
index 2318c1b..12b1347 100644 (file)
@@ -3,14 +3,14 @@ dnl To rebuild the `configure' script from this, execute the command
 dnl    autoconf
 dnl in the directory containing this script.
 dnl
 dnl    autoconf
 dnl in the directory containing this script.
 dnl
-dnl  Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-dnl  Free Software Foundation, Inc.
+dnl  Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2003,
+dnl    2004, 2005, 2006, 2007  Free Software Foundation, Inc.
 dnl
 dnl  This file is part of GNU Emacs.
 dnl
 dnl  GNU Emacs is free software; you can redistribute it and/or modify
 dnl  it under the terms of the GNU General Public License as published by
 dnl
 dnl  This file is part of GNU Emacs.
 dnl
 dnl  GNU Emacs is free software; you can redistribute it and/or modify
 dnl  it under the terms of the GNU General Public License as published by
-dnl  the Free Software Foundation; either version 2, or (at your option)
+dnl  the Free Software Foundation; either version 3, or (at your option)
 dnl  any later version.
 dnl
 dnl  GNU Emacs is distributed in the hope that it will be useful,
 dnl  any later version.
 dnl
 dnl  GNU Emacs is distributed in the hope that it will be useful,
@@ -23,7 +23,7 @@ dnl  along with GNU Emacs; see the file COPYING.  If not, write to the
 dnl  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 dnl  Boston, MA 02110-1301, USA.
 
 dnl  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 dnl  Boston, MA 02110-1301, USA.
 
-AC_PREREQ(2.54)dnl
+AC_PREREQ(2.61)dnl
 AC_INIT(src/lisp.h)
 AC_CONFIG_HEADER(src/config.h:src/config.in)
 
 AC_INIT(src/lisp.h)
 AC_CONFIG_HEADER(src/config.h:src/config.in)
 
@@ -33,8 +33,8 @@ AC_ARG_PROGRAM
 
 lispdir='${datadir}/emacs/${version}/lisp'
 locallisppath='${datadir}/emacs/${version}/site-lisp:'\
 
 lispdir='${datadir}/emacs/${version}/lisp'
 locallisppath='${datadir}/emacs/${version}/site-lisp:'\
-'${datadir}/emacs/site-lisp:${datadir}/emacs/${version}/leim'
-lisppath='${locallisppath}:${lispdir}'
+'${datadir}/emacs/site-lisp'
+lisppath='${locallisppath}:${lispdir}:${datadir}/emacs/${version}/leim'
 etcdir='${datadir}/emacs/${version}/etc'
 archlibdir='${libexecdir}/emacs/${version}/${configuration}'
 docdir='${datadir}/emacs/${version}/etc'
 etcdir='${datadir}/emacs/${version}/etc'
 archlibdir='${libexecdir}/emacs/${version}/${configuration}'
 docdir='${datadir}/emacs/${version}/etc'
@@ -42,97 +42,98 @@ gamedir='${localstatedir}/games/emacs'
 
 gameuser=games
 
 
 gameuser=games
 
-AC_ARG_WITH(gcc,
-[  --without-gcc           don't use GCC to compile Emacs if GCC is found])
-AC_ARG_WITH(pop,
-[  --without-pop           don't support POP mail retrieval with movemail],
+dnl Autoconf is so much less fun under VMS, maybe
+dnl because everything is less fun under VMS. --ttn
+AC_DEFUN([EMACS_ARG_Y],[dnl
+AC_ARG_WITH([$1],[AS_HELP_STRING([--with-$1],[$2])],[$3],[$4])dnl
+])dnl
+AC_DEFUN([EMACS_ARG_N],[dnl
+AC_ARG_WITH([$1],[AS_HELP_STRING([--without-$1],[$2])],[$3],[$4])dnl
+])dnl
+
+EMACS_ARG_N([gcc],[don't use GCC to compile Emacs if GCC is found])
+
+EMACS_ARG_N([pop],[don't support POP mail retrieval with movemail],
 [if test "$withval" = yes; then
    AC_DEFINE(MAIL_USE_POP)
 else :
 fi],
 AC_DEFINE(MAIL_USE_POP))
 AH_TEMPLATE(MAIL_USE_POP, [Define to support POP mail retrieval.])dnl
 [if test "$withval" = yes; then
    AC_DEFINE(MAIL_USE_POP)
 else :
 fi],
 AC_DEFINE(MAIL_USE_POP))
 AH_TEMPLATE(MAIL_USE_POP, [Define to support POP mail retrieval.])dnl
-AC_ARG_WITH(kerberos,
-[  --with-kerberos         support Kerberos-authenticated POP],
-[AC_DEFINE(KERBEROS)])
+
+EMACS_ARG_Y([kerberos],[support Kerberos-authenticated POP],
+[if test "$withval" = yes; then
+   AC_DEFINE(KERBEROS)
+fi])
 AH_TEMPLATE(KERBEROS,
            [Define to support Kerberos-authenticated POP mail retrieval.])dnl
 AH_TEMPLATE(KERBEROS,
            [Define to support Kerberos-authenticated POP mail retrieval.])dnl
-AC_ARG_WITH(kerberos5,
-[  --with-kerberos5        support Kerberos version 5 authenticated POP],
+
+EMACS_ARG_Y([kerberos5],[support Kerberos version 5 authenticated POP],
 [if test "${with_kerberos5+set}" = set; then
   if test "${with_kerberos+set}" != set; then
     with_kerberos=yes
     AC_DEFINE(KERBEROS)
   fi
 [if test "${with_kerberos5+set}" = set; then
   if test "${with_kerberos+set}" != set; then
     with_kerberos=yes
     AC_DEFINE(KERBEROS)
   fi
-fi
-AC_DEFINE(KERBEROS5, 1, [Define to use Kerberos 5 instead of Kerberos 4.])])
-AC_ARG_WITH(hesiod,
-[  --with-hesiod           support Hesiod to get the POP server host],
-[AC_DEFINE(HESIOD, 1, [Define to support using a Hesiod database to find the POP server.])])
+  AC_DEFINE(KERBEROS5, 1, [Define to use Kerberos 5 instead of Kerberos 4.])
+fi])
 
 
-AC_ARG_WITH(sound,
-[  --without-sound         don't compile with sound support])
+EMACS_ARG_Y([hesiod],[support Hesiod to get the POP server host],
+[if test "$withval" = yes; then
+  AC_DEFINE(HESIOD, 1, [Define to support using a Hesiod database to find the POP server.])
+fi])
+
+EMACS_ARG_N([sound],[don't compile with sound support])
 
 dnl This should be the last --with option, because --with-x is
 dnl added later on when we find the path of X, and it's best to
 dnl keep them together visually.
 
 dnl This should be the last --with option, because --with-x is
 dnl added later on when we find the path of X, and it's best to
 dnl keep them together visually.
-AC_ARG_WITH(x-toolkit,
-[  --with-x-toolkit=KIT    use an X toolkit
-                              (KIT = yes/lucid/athena/motif/gtk/no)],
+AC_ARG_WITH([x-toolkit],[AS_HELP_STRING([--with-x-toolkit=KIT],
+ [use an X toolkit (KIT one of: yes, lucid, athena, motif, gtk, no)])],
 [        case "${withval}" in
 [        case "${withval}" in
-           y | ye | yes )      val=athena ;;
+           y | ye | yes )      val=gtk ;;
            n | no )            val=no  ;;
            l | lu | luc | luci | lucid )       val=lucid ;;
            a | at | ath | athe | athen | athena )      val=athena ;;
            m | mo | mot | moti | motif )       val=motif ;;
            g | gt | gtk  )     val=gtk ;;
            n | no )            val=no  ;;
            l | lu | luc | luci | lucid )       val=lucid ;;
            a | at | ath | athe | athen | athena )      val=athena ;;
            m | mo | mot | moti | motif )       val=motif ;;
            g | gt | gtk  )     val=gtk ;;
-dnl These don't currently work.
-dnl        o | op | ope | open | open- | open-l | open-lo \
-dnl            | open-loo | open-look )        val=open-look ;;
            * )
            * )
-dnl AC_MSG_ERROR([the `--with-x-toolkit' option is supposed to have a value
-dnl which is `yes', `no', `lucid', `athena', `motif' or `open-look'.])
-AC_MSG_ERROR([`--with-x-toolkit=$withval' is invalid\;
+AC_MSG_ERROR([`--with-x-toolkit=$withval' is invalid;
 this option's value should be `yes', `no', `lucid', `athena', `motif' or `gtk'.
 this option's value should be `yes', `no', `lucid', `athena', `motif' or `gtk'.
-Currently, `yes', `athena' and `lucid' are synonyms.])
+`yes' and `gtk' are synonyms. `athena' and `lucid' are synonyms.])
            ;;
          esac
          with_x_toolkit=$val
 ])
            ;;
          esac
          with_x_toolkit=$val
 ])
-AC_ARG_WITH(xpm,
-[  --with-xpm              use -lXpm for displaying XPM images])
-AC_ARG_WITH(jpeg,
-[  --with-jpeg             use -ljpeg for displaying JPEG images])
-AC_ARG_WITH(tiff,
-[  --with-tiff             use -ltiff for displaying TIFF images])
-AC_ARG_WITH(gif,
-[  --with-gif              use -lungif for displaying GIF images])
-AC_ARG_WITH(png,
-[  --with-png              use -lpng for displaying PNG images])
-AC_ARG_WITH(gtk,
-[  --with-gtk              use GTK (same as --with-x-toolkit=gtk)])
-AC_ARG_WITH(pkg-config-prog,
-[  --with-pkg-config-prog  Path to pkg-config to use for finding GTK])
-AC_ARG_WITH(toolkit-scroll-bars,
-[  --without-toolkit-scroll-bars
-                          don't use Motif or Xaw3d scroll bars])
-AC_ARG_WITH(xim,
-[  --without-xim           don't use X11 XIM])
-AC_ARG_WITH(carbon,
-[  --without-carbon        don't use Carbon GUI on Mac OS X])
+
+EMACS_ARG_Y([xpm],[use -lXpm for displaying XPM images])
+EMACS_ARG_Y([jpeg],[use -ljpeg for displaying JPEG images])
+EMACS_ARG_Y([tiff],[use -ltiff for displaying TIFF images])
+EMACS_ARG_Y([gif],[use -lgif (or -lungif) for displaying GIF images])
+EMACS_ARG_Y([png],[use -lpng for displaying PNG images])
+EMACS_ARG_Y([gpm],[use -lgpm for mouse support on a GNU/Linux console])
+EMACS_ARG_Y([rsvg],[use -lrsvg-2 for displaying SVG images])
+EMACS_ARG_Y([gtk],[use GTK (same as --with-x-toolkit=gtk)])
+EMACS_ARG_Y([pkg-config-prog],[Path to pkg-config for finding GTK and librsvg])
+EMACS_ARG_N([toolkit-scroll-bars],[don't use Motif or Xaw3d scroll bars])
+EMACS_ARG_N([xaw3d],[don't use Xaw3d])
+EMACS_ARG_N([xim],[don't use X11 XIM])
+EMACS_ARG_N([carbon],[don't use Carbon GUI on Mac OS X])
+
 AC_ARG_ENABLE(carbon-app,
 AC_ARG_ENABLE(carbon-app,
-[[  --enable-carbon-app[=DIR]  [DIR=/Application]
-                          specify install directory for Emacs.app on Mac OS X]],
+[AS_HELP_STRING([--enable-carbon-app@<:@=DIR@:>@],
+                [specify install directory for Emacs.app on Mac OS X
+                [DIR=/Application]])],
 [ carbon_appdir_x=${enableval}])
 
 AC_ARG_ENABLE(asserts,
 [ carbon_appdir_x=${enableval}])
 
 AC_ARG_ENABLE(asserts,
-[  --enable-asserts        compile code with asserts enabled],
+[AS_HELP_STRING([--enable-asserts], [compile code with asserts enabled])],
       USE_XASSERTS=$enableval,
       USE_XASSERTS=no)
 
 AC_ARG_ENABLE(maintainer-mode,
       USE_XASSERTS=$enableval,
       USE_XASSERTS=no)
 
 AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
+[AS_HELP_STRING([--enable-maintainer-mode],
+                [enable make rules and dependencies not useful (and sometimes
+                confusing) to the casual installer])],
       USE_MAINTAINER_MODE=$enableval,
       USE_MAINTAINER_MODE=no)
 if test $USE_MAINTAINER_MODE = yes; then
       USE_MAINTAINER_MODE=$enableval,
       USE_MAINTAINER_MODE=no)
 if test $USE_MAINTAINER_MODE = yes; then
@@ -143,9 +144,9 @@ fi
 AC_SUBST(MAINT)
 
 AC_ARG_ENABLE(locallisppath,
 AC_SUBST(MAINT)
 
 AC_ARG_ENABLE(locallisppath,
-[  --enable-locallisppath=PATH
-                          directories Emacs should search for lisp files
-                          specific to this site],
+[AS_HELP_STRING([--enable-locallisppath=PATH],
+                [directories Emacs should search for lisp files specific
+                to this site])],
 if test "${enableval}" = "no"; then
   locallisppath=
 elif test "${enableval}" != "yes"; then
 if test "${enableval}" = "no"; then
   locallisppath=
 elif test "${enableval}" != "yes"; then
@@ -194,7 +195,7 @@ fi
 
 AC_CANONICAL_HOST
 canonical=$host
 
 AC_CANONICAL_HOST
 canonical=$host
-configuration=${host_alias-$host}
+configuration=${host_alias-${build_alias-$host}}
 
 dnl This used to use changequote, but, apart from `changequote is evil'
 dnl per the autoconf manual, we can speed up autoconf somewhat by quoting
 
 dnl This used to use changequote, but, apart from `changequote is evil'
 dnl per the autoconf manual, we can speed up autoconf somewhat by quoting
@@ -237,6 +238,9 @@ case "${canonical}" in
     opsys=freebsd
     case "${canonical}" in
       alpha*-*-freebsd*)       machine=alpha ;;
     opsys=freebsd
     case "${canonical}" in
       alpha*-*-freebsd*)       machine=alpha ;;
+      ia64-*-freebsd*)         machine=ia64 ;;
+      sparc64-*-freebsd*)      machine=sparc ;;
+      powerpc-*-freebsd*)      machine=macppc ;;
       i[3456]86-*-freebsd*)    machine=intel386 ;;
       amd64-*-freebsd*|x86_64-*-freebsd*) machine=amdx86-64 ;;
     esac
       i[3456]86-*-freebsd*)    machine=intel386 ;;
       amd64-*-freebsd*|x86_64-*-freebsd*) machine=amdx86-64 ;;
     esac
@@ -257,7 +261,6 @@ dnl see the `changequote' comment above.
       m68k-*-netbsd*)
                        # This is somewhat bogus.
                        machine=hp9000s300 ;;
       m68k-*-netbsd*)
                        # This is somewhat bogus.
                        machine=hp9000s300 ;;
-      powerpc-apple-netbsd*) machine=macppc ;;
       mips-*-netbsd*)  machine=pmax ;;
       mipsel-*-netbsd*)        machine=pmax ;;
       mipseb-*-netbsd*)        machine=pmax ;;
       mips-*-netbsd*)  machine=pmax ;;
       mipsel-*-netbsd*)        machine=pmax ;;
       mipseb-*-netbsd*)        machine=pmax ;;
@@ -266,6 +269,9 @@ dnl see the `changequote' comment above.
       sparc*-*-netbsd*)        machine=sparc ;;
       vax-*-netbsd*)   machine=vax ;;
       arm-*-netbsd*)   machine=arm ;;
       sparc*-*-netbsd*)        machine=sparc ;;
       vax-*-netbsd*)   machine=vax ;;
       arm-*-netbsd*)   machine=arm ;;
+      x86_64-*-netbsd*)        machine=amdx86-64 ;;
+      hppa-*-netbsd*)  machine=hp800 ;;
+      shle-*-netbsd*)  machine=sh3el ;;
     esac
   ;;
 
     esac
   ;;
 
@@ -274,12 +280,17 @@ dnl see the `changequote' comment above.
     opsys=openbsd
     case "${canonical}" in
       alpha*-*-openbsd*)       machine=alpha ;;
     opsys=openbsd
     case "${canonical}" in
       alpha*-*-openbsd*)       machine=alpha ;;
-      i386-*-openbsd*) machine=intel386 ;;
-      m68k-*-openbsd*)  machine=hp9000s300 ;;
-      mipsel-*-openbsd*) machine=pmax ;;
-      ns32k-*-openbsd*)        machine=ns32000 ;;
-      sparc-*-openbsd*)        machine=sparc ;;
-      vax-*-openbsd*)  machine=vax ;;
+      arm-*-openbsd*)          machine=arm ;;
+      hppa-*-openbsd*)         machine=hp9000s300 ;;
+      i386-*-openbsd*)         machine=intel386 ;;
+      m68k-*-openbsd*)         machine=hp9000s300 ;;
+      m88k-*-openbsd*)         machine=aviion ;;
+      mips64-*-openbsd*)       machine=mips64 ;;
+      powerpc-*-openbsd*)      machine=macppc ;;
+      sh-*-openbsd*)           machine=sh3el ;;
+      sparc*-*-openbsd*)       machine=sparc ;;
+      vax-*-openbsd*)          machine=vax ;;
+      x86_64-*-openbsd*)       machine=amdx86-64 ;;
     esac
   ;;
 
     esac
   ;;
 
@@ -372,6 +383,24 @@ dnl see the `changequote' comment above.
     machine=apollo opsys=bsd4-3
   ;;
 
     machine=apollo opsys=bsd4-3
   ;;
 
+  ## Apple Darwin / Mac OS X
+  *-apple-darwin* )
+    case "${canonical}" in
+      i[3456]86-* )  machine=intel386 ;;
+      powerpc-* )    machine=powermac ;;
+      * )            unported=yes ;;
+    esac
+    opsys=darwin
+    # Define CPP as follows to make autoconf work correctly.
+    CPP="${CC-cc} -E -no-cpp-precomp"
+    # Use fink packages if available.
+    if test -d /sw/include && test -d /sw/lib; then
+      GCC_TEST_OPTIONS="-I/sw/include -L/sw/lib"
+      CPP="${CPP} ${GCC_TEST_OPTIONS}"
+      NON_GCC_TEST_OPTIONS=${GCC_TEST_OPTIONS}
+    fi
+  ;;
+
   ## AT&T 3b2, 3b5, 3b15, 3b20
   we32k-att-sysv* )
     machine=att3b opsys=usg5-2-2
   ## AT&T 3b2, 3b5, 3b15, 3b20
   we32k-att-sysv* )
     machine=att3b opsys=usg5-2-2
@@ -611,6 +640,7 @@ dnl see the `changequote' comment above.
   ;;
   hppa*-hp-hpux1[1-9]* )
     machine=hp800 opsys=hpux11
   ;;
   hppa*-hp-hpux1[1-9]* )
     machine=hp800 opsys=hpux11
+    CFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CFLAGS"
   ;;
 
   hppa*-*-linux-gnu* )
   ;;
 
   hppa*-*-linux-gnu* )
@@ -654,6 +684,9 @@ dnl see the `changequote' comment above.
   s390-*-linux-gnu* )
     machine=ibms390 opsys=gnu-linux
   ;;
   s390-*-linux-gnu* )
     machine=ibms390 opsys=gnu-linux
   ;;
+  s390x-*-linux-gnu* )
+    machine=ibms390x opsys=gnu-linux
+  ;;
   rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1*  )
     machine=ibmrs6000 opsys=aix3-1
   ;;
   rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1*  )
     machine=ibmrs6000 opsys=aix3-1
   ;;
@@ -666,6 +699,9 @@ dnl see the `changequote' comment above.
   rs6000-ibm-aix4.2* | powerpc-ibm-aix4.2*  )
     machine=ibmrs6000 opsys=aix4-2
   ;;
   rs6000-ibm-aix4.2* | powerpc-ibm-aix4.2*  )
     machine=ibmrs6000 opsys=aix4-2
   ;;
+  rs6000-ibm-aix4.3* | powerpc-ibm-aix4.3*  )
+    machine=ibmrs6000 opsys=aix4-2
+  ;;
   rs6000-ibm-aix5* | powerpc-ibm-aix5*  )
     machine=ibmrs6000 opsys=aix4-2
   ;;
   rs6000-ibm-aix5* | powerpc-ibm-aix5*  )
     machine=ibmrs6000 opsys=aix4-2
   ;;
@@ -943,6 +979,7 @@ dnl see the `changequote' comment above.
       m68* )           machine=sun3 ;;
       i[3456]86-sun-sunos[34]* )       machine=sun386 ;;
       i[3456]86-*-* )     machine=intel386 ;;
       m68* )           machine=sun3 ;;
       i[3456]86-sun-sunos[34]* )       machine=sun386 ;;
       i[3456]86-*-* )     machine=intel386 ;;
+      amd64-*-*|x86_64-*-*)    machine=amdx86-64 ;;
       powerpcle* )      machine=powerpcle ;;
       powerpc* | rs6000* )  machine=ibmrs6000 ;;
       sparc* )         machine=sparc ;;
       powerpcle* )      machine=powerpcle ;;
       powerpc* | rs6000* )  machine=ibmrs6000 ;;
       sparc* )         machine=sparc ;;
@@ -990,6 +1027,7 @@ dnl see the `changequote' comment above.
                ;;
       *-sunos5* | *-solaris* )
                opsys=sol2-6
                ;;
       *-sunos5* | *-solaris* )
                opsys=sol2-6
+               emacs_check_sunpro_c=yes
                NON_GNU_CPP=/usr/ccs/lib/cpp
                ;;
       *                          ) opsys=bsd4-2   ;;
                NON_GNU_CPP=/usr/ccs/lib/cpp
                ;;
       *                          ) opsys=bsd4-2   ;;
@@ -1143,24 +1181,16 @@ dnl see the `changequote' comment above.
     machine=f301 opsys=uxpv
   ;;
 
     machine=f301 opsys=uxpv
   ;;
 
-  ## Darwin / Mac OS X
-  powerpc-apple-darwin* )
-    machine=powermac opsys=darwin
-    # Define CPP as follows to make autoconf work correctly.
-    CPP="${CC-cc} -E -no-cpp-precomp"
-    # Use fink packages if available.
-    if test -d /sw/include && test -d /sw/lib; then
-       GCC_TEST_OPTIONS="-I/sw/include -L/sw/lib"
-        CPP="${CPP} ${GCC_TEST_OPTIONS}"
-       NON_GCC_TEST_OPTIONS=${GCC_TEST_OPTIONS}
-    fi
-  ;;
-
   ## AMD x86-64 Linux-based GNU system
   x86_64-*-linux-gnu* )
     machine=amdx86-64 opsys=gnu-linux
   ;;
 
   ## AMD x86-64 Linux-based GNU system
   x86_64-*-linux-gnu* )
     machine=amdx86-64 opsys=gnu-linux
   ;;
 
+  ## Tensilica Xtensa Linux-based GNU system    
+  xtensa-*-linux-gnu* )
+    machine=xtensa opsys=gnu-linux
+    ;;
+
   * )
     unported=yes
   ;;
   * )
     unported=yes
   ;;
@@ -1234,6 +1264,24 @@ if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 
   CPP=
 fi
 
+## If not using gcc, and on Solaris, and no CPP specified, see if
+## using a Sun compiler, which needs -Xs to prevent whitespace.
+if test x"$GCC" != xyes && test x"$emacs_check_sunpro_c" = xyes && \
+ test x"$CPP" = x; then
+  AC_MSG_CHECKING([whether we are using a Sun C compiler])
+  AC_CACHE_VAL(emacs_cv_sunpro_c,
+  [AC_TRY_LINK([],
+[#ifndef __SUNPRO_C
+fail;
+#endif
+], emacs_cv_sunpro_c=yes, emacs_cv_sunpro_c=no)])
+  AC_MSG_RESULT($emacs_cv_sunpro_c)
+
+  if test x"$emacs_cv_sunpro_c" = xyes; then
+    NON_GNU_CPP="$CC -E -Xs"
+  fi
+fi
+
 #### Some systems specify a CPP to use unless we are using GCC.
 #### Now that we know whether we are using GCC, we can decide whether
 #### to use that one.
 #### Some systems specify a CPP to use unless we are using GCC.
 #### Now that we know whether we are using GCC, we can decide whether
 #### to use that one.
@@ -1293,6 +1341,21 @@ AC_PATH_PROG(INSTALL_INFO, install-info,:, /sbin)
 dnl Don't use GZIP, which is used by gzip for additional parameters.
 AC_PATH_PROG(GZIP_PROG, gzip)
 
 dnl Don't use GZIP, which is used by gzip for additional parameters.
 AC_PATH_PROG(GZIP_PROG, gzip)
 
+
+## Need makeinfo >= 4.6 (?) to build the manuals.
+AC_PATH_PROG(MAKEINFO, makeinfo, no)
+dnl By this stage, configure has already checked for egrep and set EGREP, 
+dnl or exited with an error if no egrep was found.
+if test "$MAKEINFO" != "no" && \
+  test x"`$MAKEINFO --version 2> /dev/null | $EGREP 'texinfo[[^0-9]]*([[1-4]][[0-9]]+|[[5-9]]|4\.[[6-9]]|4\.[[1-5]][[0-9]]+)'`" = x; then
+   MAKEINFO=no    
+fi
+
+if test "$MAKEINFO" = "no"; then
+  AC_MSG_ERROR( [makeinfo >= 4.6 is required] )
+fi
+
+
 dnl Add our options to ac_link now, after it is set up.
 
 if test x$GCC = xyes && test "x$GCC_LINK_TEST_OPTIONS" != x
 dnl Add our options to ac_link now, after it is set up.
 
 if test x$GCC = xyes && test "x$GCC_LINK_TEST_OPTIONS" != x
@@ -1476,12 +1539,113 @@ AC_CONFIG_LIBOBJ_DIR(src)
 dnl Do this early because it can frob feature test macros for Unix-98 &c.
 AC_SYS_LARGEFILE
 
 dnl Do this early because it can frob feature test macros for Unix-98 &c.
 AC_SYS_LARGEFILE
 
+
+### The standard library on x86-64 GNU/Linux distributions can 
+### be located in either /usr/lib64 or /usr/lib.
+case "${canonical}" in
+  x86_64-*-linux-gnu* )
+    if test -d /usr/lib64; then
+      AC_DEFINE(HAVE_X86_64_LIB64_DIR, 1,
+        [Define to 1 if the file /usr/lib64 exists.])
+fi
+esac
+
+dnl This function defintion taken from Gnome 2.0
+dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
+dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
+dnl also defines GSTUFF_PKG_ERRORS on error
+AC_DEFUN([PKG_CHECK_MODULES], [
+  succeeded=no
+
+  if test -z "$PKG_CONFIG"; then
+    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+  fi
+
+  if test "$PKG_CONFIG" = "no" ; then
+     ifelse([$4], , [AC_MSG_ERROR([
+      *** The pkg-config script could not be found. Make sure it is in your path, or give the full path to pkg-config with the PKG_CONFIG environment variable or --with-pkg-config-prog.  Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.])], [$4])
+  else
+     PKG_CONFIG_MIN_VERSION=0.9.0
+     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+        AC_MSG_CHECKING(for $2)
+
+        if $PKG_CONFIG --exists "$2" 2>&AS_MESSAGE_LOG_FD; then
+            AC_MSG_RESULT(yes)
+            succeeded=yes
+
+            AC_MSG_CHECKING($1_CFLAGS)
+            $1_CFLAGS=`$PKG_CONFIG --cflags "$2"|sed -e 's,///*,/,g'`
+            AC_MSG_RESULT($$1_CFLAGS)
+
+            AC_MSG_CHECKING($1_LIBS)
+            $1_LIBS=`$PKG_CONFIG --libs "$2"|sed -e 's,///*,/,g'`
+            AC_MSG_RESULT($$1_LIBS)
+        else
+            AC_MSG_RESULT(no)
+            $1_CFLAGS=""
+            $1_LIBS=""
+            ## If we have a custom action on failure, don't print errors, but
+            ## do set a variable so people can do so.
+            $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+            ifelse([$4], ,echo $$1_PKG_ERRORS,)
+        fi
+
+        AC_SUBST($1_CFLAGS)
+        AC_SUBST($1_LIBS)
+     else
+        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+        echo "*** See http://www.freedesktop.org/software/pkgconfig"
+     fi
+  fi
+
+  if test $succeeded = yes; then
+     ifelse([$3], , :, [$3])
+  else
+     ifelse([$4], , [AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.])], [$4])
+  fi
+])
+
+
 if test "${with_sound}" != "no"; then
   # Sound support for GNU/Linux and the free BSDs.
   AC_CHECK_HEADERS(machine/soundcard.h sys/soundcard.h soundcard.h)
   # Emulation library used on NetBSD.
   AC_CHECK_LIB(ossaudio, _oss_ioctl, LIBSOUND=-lossaudio, LIBSOUND=)
   AC_SUBST(LIBSOUND)
 if test "${with_sound}" != "no"; then
   # Sound support for GNU/Linux and the free BSDs.
   AC_CHECK_HEADERS(machine/soundcard.h sys/soundcard.h soundcard.h)
   # Emulation library used on NetBSD.
   AC_CHECK_LIB(ossaudio, _oss_ioctl, LIBSOUND=-lossaudio, LIBSOUND=)
   AC_SUBST(LIBSOUND)
+
+  ALSA_REQUIRED=1.0.0
+  ALSA_MODULES="alsa >= $ALSA_REQUIRED"
+  dnl Check if --with-pkg-config-prog has been given.
+  if test "X${with_pkg_config_prog}" != X; then
+    PKG_CONFIG="${with_pkg_config_prog}"
+  fi
+  PKG_CHECK_MODULES(ALSA, $ALSA_MODULES, HAVE_ALSA=yes, HAVE_ALSA=no)
+  if test $HAVE_ALSA = yes; then
+    SAVE_CFLAGS="$CFLAGS"
+    SAVE_LDFLAGS="$LDFLAGS"
+    CFLAGS="$ALSA_CFLAGS $CFLAGS"
+    LDFLAGS="$ALSA_LIBS $LDFLAGS"
+    AC_TRY_COMPILE([#include <asoundlib.h>], [snd_lib_error_set_handler (0);],
+                    emacs_alsa_normal=yes,
+                   emacs_alsa_normal=no)
+    if test "$emacs_alsa_normal" != yes; then
+      AC_TRY_COMPILE([#include <alsa/asoundlib.h>],
+                     [snd_lib_error_set_handler (0);],
+                     emacs_alsa_subdir=yes,
+                    emacs_alsa_subdir=no)
+      if test "$emacs_alsa_subdir" != yes; then
+        AC_MSG_ERROR([pkg-config found alsa, but it does not compile.  See config.log for error messages.])
+      fi
+      ALSA_CFLAGS="$ALSA_CFLAGS -DALSA_SUBDIR_INCLUDE"
+    fi
+
+    CFLAGS="$SAVE_CFLAGS"
+    LDFLAGS="$SAVE_LDFLAGS"
+    LIBSOUND="$LIBSOUND $ALSA_LIBS"
+    CFLAGS_SOUND="$CFLAGS_SOUND $ALSA_CFLAGS"
+    AC_DEFINE(HAVE_ALSA, 1, [Define to 1 if ALSA is available.])
+  fi
+  AC_SUBST(CFLAGS_SOUND)
 fi
 
 dnl checks for header files
 fi
 
 dnl checks for header files
@@ -1645,11 +1809,18 @@ else
   window_system=x11
 fi
 
   window_system=x11
 fi
 
-if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then
-  LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
-  LD_SWITCH_X_SITE_AUX=-R`echo ${x_libraries} | sed -e "s/:/ -R/g"`
+if test "${x_libraries}" != NONE; then
+  if test -n "${x_libraries}"; then
+    LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
+    LD_SWITCH_X_SITE_AUX=-R`echo ${x_libraries} | sed -e "s/:/ -R/g"`
+  fi
   x_default_search_path=""
   x_default_search_path=""
-  for x_library in `echo ${x_libraries} | sed -e "s/:/ /g"`; do
+  x_search_path=${x_libraries}
+  if test -z "${x_search_path}"; then
+    x_search_path=/usr/lib
+  fi
+  for x_library in `echo ${x_search_path}: | \
+                   sed -e "s/:/ /g" -e p -e "s:/lib[[^ /]]* :/share :g"`; do
     x_search_path="\
 ${x_library}/X11/%L/%T/%N%C%S:\
 ${x_library}/X11/%l/%T/%N%C%S:\
     x_search_path="\
 ${x_library}/X11/%L/%T/%N%C%S:\
 ${x_library}/X11/%l/%T/%N%C%S:\
@@ -1693,7 +1864,13 @@ fi
 if test "${window_system}" = x11 && test "${HAVE_CARBON}" = yes; then
   if test "${with_carbon+set}" != set \
      && test "${carbon_appdir_x+set}" != set; then
 if test "${window_system}" = x11 && test "${HAVE_CARBON}" = yes; then
   if test "${with_carbon+set}" != set \
      && test "${carbon_appdir_x+set}" != set; then
-    HAVE_CARBON=no
+    for var in with_x with_x_toolkit with_gtk with_xim \
+               with_xpm with_jpeg with_tiff with_gif with_png; do
+      if eval test \"\${$var+set}\" = set; then
+        HAVE_CARBON=no
+        break
+      fi
+    done
   fi
 fi
 if test "${HAVE_CARBON}" = yes; then
   fi
 fi
 if test "${HAVE_CARBON}" = yes; then
@@ -1707,15 +1884,20 @@ case "${window_system}" in
     case "${with_x_toolkit}" in
       athena | lucid ) USE_X_TOOLKIT=LUCID ;;
       motif ) USE_X_TOOLKIT=MOTIF ;;
     case "${with_x_toolkit}" in
       athena | lucid ) USE_X_TOOLKIT=LUCID ;;
       motif ) USE_X_TOOLKIT=MOTIF ;;
-dnl      open-look ) USE_X_TOOLKIT=OPEN_LOOK ;;
       gtk ) with_gtk=yes
 dnl Dont set this for GTK.  A lot of tests below assumes Xt when
 dnl USE_X_TOOLKIT is set.
             USE_X_TOOLKIT=none ;;
       no ) USE_X_TOOLKIT=none ;;
       gtk ) with_gtk=yes
 dnl Dont set this for GTK.  A lot of tests below assumes Xt when
 dnl USE_X_TOOLKIT is set.
             USE_X_TOOLKIT=none ;;
       no ) USE_X_TOOLKIT=none ;;
-dnl If user did not say whether to use a toolkit,
-dnl make this decision later: use the toolkit if we have X11R5 or newer.
-      * ) USE_X_TOOLKIT=maybe ;;
+dnl If user did not say whether to use a toolkit, make this decision later:
+dnl use the toolkit if we have gtk, or X11R5 or newer.
+      * ) 
+          if test x"$with_gtk" = xyes; then
+             USE_X_TOOLKIT=none
+          else
+             USE_X_TOOLKIT=maybe
+          fi
+          ;;
     esac
   ;;
   mac | none )
     esac
   ;;
   mac | none )
@@ -1725,6 +1907,22 @@ dnl make this decision later: use the toolkit if we have X11R5 or newer.
   ;;
 esac
 
   ;;
 esac
 
+if test "$window_system" = none && test "X$with_x" != "Xno"; then
+   AC_CHECK_PROG(HAVE_XSERVER, X, true, false)
+   if test "$HAVE_XSERVER" = true ||
+      test -n "$DISPLAY" || 
+      test "`echo /usr/lib/libX11.*`" != "/usr/lib/libX11.*"; then
+        AC_MSG_ERROR([You seem to be running X, but no X development libraries
+were found.  You should install the relevant development files for X
+and for the toolkit you want, such as Gtk+, Lesstif or Motif.  Also make
+sure you have development files for image handling, i.e.
+tiff, gif, jpeg, png and xpm.
+If you are sure you want Emacs compiled without X window support, pass
+  --without-x
+to configure.])
+   fi
+fi
+
 ### If we're using X11, we should use the X menu package.
 HAVE_MENUS=no
 case ${HAVE_X11} in
 ### If we're using X11, we should use the X menu package.
 HAVE_MENUS=no
 case ${HAVE_X11} in
@@ -1920,88 +2118,44 @@ fail;
   fi
 fi
 
   fi
 fi
 
-if test "${window_system}" = "x11"; then
-  AC_MSG_CHECKING(X11 version 5)
-  AC_CACHE_VAL(emacs_cv_x11_version_5,
-  [AC_TRY_LINK([#include <X11/Xlib.h>],
-[#if XlibSpecificationRelease < 5
-fail;
-#endif
-], emacs_cv_x11_version_5=yes, emacs_cv_x11_version_5=no)])
-  if test $emacs_cv_x11_version_5 = yes; then
-    AC_MSG_RESULT(5 or newer)
-    HAVE_X11R5=yes
-    AC_DEFINE(HAVE_X11R5, 1,
-             [Define to 1 if you have the X11R5 or newer version of Xlib.])
-  else
-    HAVE_X11R5=no
-    AC_MSG_RESULT(before 5)
-  fi
-fi
-
-dnl This function defintion taken from Gnome 2.0
-dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
-dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
-dnl also defines GSTUFF_PKG_ERRORS on error
-AC_DEFUN([PKG_CHECK_MODULES], [
-  succeeded=no
-
-  if test -z "$PKG_CONFIG"; then
-    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-  fi
 
 
-  if test "$PKG_CONFIG" = "no" ; then
-     echo "*** The pkg-config script could not be found. Make sure it is"
-     echo "*** in your path, or give the full path to pkg-config with"
-     echo "*** the PKG_CONFIG environment variable or --with-pkg-config-prog."
-     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
-  else
-     PKG_CONFIG_MIN_VERSION=0.9.0
-     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
-        AC_MSG_CHECKING(for $2)
+### Use -lrsvg-2 if available, unless `--with-rsvg=no' is specified.
+HAVE_RSVG=no
+if test "${HAVE_X11}" = "yes" || test "${HAVE_CARBON}" = "yes"; then
+  if test "${with_rsvg}" != "no"; then
+    dnl Check if `--with-pkg-config-prog' has been given.
+    if test "X${with_pkg_config_prog}" != X; then
+      PKG_CONFIG="${with_pkg_config_prog}"
+    fi
 
 
-        if $PKG_CONFIG --exists "$2" ; then
-            AC_MSG_RESULT(yes)
-            succeeded=yes
+    RSVG_REQUIRED=2.0.0
+    RSVG_MODULE="librsvg-2.0 >= $RSVG_REQUIRED"
 
 
-            AC_MSG_CHECKING($1_CFLAGS)
-            $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
-            AC_MSG_RESULT($$1_CFLAGS)
+    PKG_CHECK_MODULES(RSVG, $RSVG_MODULE, :, :)
+    AC_SUBST(RSVG_CFLAGS)
+    AC_SUBST(RSVG_LIBS)
 
 
-            AC_MSG_CHECKING($1_LIBS)
-            $1_LIBS=`$PKG_CONFIG --libs "$2"`
-            AC_MSG_RESULT($$1_LIBS)
-        else
-            $1_CFLAGS=""
-            $1_LIBS=""
-            ## If we have a custom action on failure, don't print errors, but
-            ## do set a variable so people can do so.
-            $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
-            ifelse([$4], ,echo $$1_PKG_ERRORS,)
-        fi
-
-        AC_SUBST($1_CFLAGS)
-        AC_SUBST($1_LIBS)
-     else
-        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
-        echo "*** See http://www.freedesktop.org/software/pkgconfig"
-     fi
+    if test ".${RSVG_CFLAGS}" != "."; then
+      HAVE_RSVG=yes
+      AC_DEFINE(HAVE_RSVG, 1, [Define to 1 if using librsvg.])
+      CFLAGS="$CFLAGS $RSVG_CFLAGS"
+      LIBS="$RSVG_LIBS $LIBS"
+    fi
   fi
   fi
+fi
 
 
-  if test $succeeded = yes; then
-     ifelse([$3], , :, [$3])
-  else
-     ifelse([$4], , [AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.])], [$4])
-  fi
-])
 
 HAVE_GTK=no
 
 HAVE_GTK=no
-if test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "gtk"; then
+if test "${with_gtk}" = "yes" && test "$USE_X_TOOLKIT" = "gtk"; then
+  USE_X_TOOLKIT=none
+fi
+if test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "gtk" || \
+ test "$USE_X_TOOLKIT" = "maybe"; then
   if test "$USE_X_TOOLKIT" != "none" && test "$USE_X_TOOLKIT" != "maybe"; then
     AC_MSG_ERROR([Conflicting options, --with-gtk is incompatible with --with-x-toolkit=${with_x_toolkit}]);
   fi
   if test "$USE_X_TOOLKIT" != "none" && test "$USE_X_TOOLKIT" != "maybe"; then
     AC_MSG_ERROR([Conflicting options, --with-gtk is incompatible with --with-x-toolkit=${with_x_toolkit}]);
   fi
-  GLIB_REQUIRED=2.0.1
-  GTK_REQUIRED=2.0.1
+  GLIB_REQUIRED=2.6
+  GTK_REQUIRED=2.6
   GTK_MODULES="gtk+-2.0 >= $GTK_REQUIRED glib-2.0 >= $GLIB_REQUIRED"
 
   dnl Check if --with-pkg-config-prog has been given.
   GTK_MODULES="gtk+-2.0 >= $GTK_REQUIRED glib-2.0 >= $GLIB_REQUIRED"
 
   dnl Check if --with-pkg-config-prog has been given.
@@ -2009,15 +2163,37 @@ if test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "gtk"; then
     PKG_CONFIG="${with_pkg_config_prog}"
   fi
   dnl Checks for libraries.
     PKG_CONFIG="${with_pkg_config_prog}"
   fi
   dnl Checks for libraries.
-  PKG_CHECK_MODULES(GTK, $GTK_MODULES)
+  PKG_CHECK_MODULES(GTK, $GTK_MODULES, pkg_check_gtk=yes, pkg_check_gtk=no)
+  if test "$pkg_check_gtk" = "no" && test "$USE_X_TOOLKIT" != "maybe"; then
+     AC_MSG_ERROR($GTK_PKG_ERRORS)
+  fi
+fi
+
+
+if test x"$pkg_check_gtk" = xyes; then
+
   AC_SUBST(GTK_CFLAGS)
   AC_SUBST(GTK_LIBS)
   C_SWITCH_X_SITE="$C_SWITCH_X_SITE $GTK_CFLAGS"
   CFLAGS="$CFLAGS $GTK_CFLAGS"
   LIBS="$GTK_LIBS $LIBS"
   AC_SUBST(GTK_CFLAGS)
   AC_SUBST(GTK_LIBS)
   C_SWITCH_X_SITE="$C_SWITCH_X_SITE $GTK_CFLAGS"
   CFLAGS="$CFLAGS $GTK_CFLAGS"
   LIBS="$GTK_LIBS $LIBS"
-  HAVE_GTK=yes
-  AC_DEFINE(HAVE_GTK, 1, [Define to 1 if using GTK.])
-  USE_X_TOOLKIT=none
+  dnl Try to compile a simple GTK program.
+  GTK_COMPILES=no
+  AC_CHECK_FUNCS(gtk_main, GTK_COMPILES=yes)
+  if test "${GTK_COMPILES}" != "yes"; then
+    if test "$USE_X_TOOLKIT" != "maybe"; then
+      AC_MSG_ERROR([Gtk+ wanted, but it does not compile, see config.log.  Maybe some x11-devel files missing?]);
+    fi
+  else
+    HAVE_GTK=yes
+    AC_DEFINE(HAVE_GTK, 1, [Define to 1 if using GTK.])
+    USE_X_TOOLKIT=none
+  fi
+
+fi
+
+
+if test "${HAVE_GTK}" = "yes"; then
 
   dnl  GTK scrollbars resemble toolkit scrollbars a lot, so to avoid
   dnl  a lot if #ifdef:s, say we have toolkit scrollbars.
 
   dnl  GTK scrollbars resemble toolkit scrollbars a lot, so to avoid
   dnl  a lot if #ifdef:s, say we have toolkit scrollbars.
@@ -2033,6 +2209,7 @@ if test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "gtk"; then
     AC_DEFINE(HAVE_GTK_MULTIDISPLAY, 1,
               [Define to 1 if GTK can handle more than one display.])
   fi
     AC_DEFINE(HAVE_GTK_MULTIDISPLAY, 1,
               [Define to 1 if GTK can handle more than one display.])
   fi
+
   dnl  Check if we have the old file selection dialog.
   dnl  If gdk_display_open exists, assume all others are there also.
   HAVE_GTK_FILE_SELECTION=no
   dnl  Check if we have the old file selection dialog.
   dnl  If gdk_display_open exists, assume all others are there also.
   HAVE_GTK_FILE_SELECTION=no
@@ -2058,34 +2235,88 @@ if test "${with_gtk}" = "yes" || test "$USE_X_TOOLKIT" = "gtk"; then
       AC_CHECK_LIB(pthread, pthread_self, HAVE_GTK_AND_PTHREAD=yes)
     fi
     if test "$HAVE_GTK_AND_PTHREAD" = yes; then
       AC_CHECK_LIB(pthread, pthread_self, HAVE_GTK_AND_PTHREAD=yes)
     fi
     if test "$HAVE_GTK_AND_PTHREAD" = yes; then
-      GTK_LIBS="$GTK_LIBS -lpthread"
+      case "${canonical}" in
+        *-hpux*) ;;
+        *) GTK_LIBS="$GTK_LIBS -lpthread" ;;
+      esac
       AC_DEFINE(HAVE_GTK_AND_PTHREAD, 1,
                [Define to 1 if you have GTK and pthread (-lpthread).])
     fi
   fi
 fi
 
       AC_DEFINE(HAVE_GTK_AND_PTHREAD, 1,
                [Define to 1 if you have GTK and pthread (-lpthread).])
     fi
   fi
 fi
 
+### Link with -lXft if available to work around a bug.
+HAVE_XFT=maybe
+if test "${HAVE_GTK}" = "yes"; then
+  dnl Check if --with-pkg-config-prog has been given.
+  if test "X${with_pkg_config_prog}" != X; then
+    PKG_CONFIG="${with_pkg_config_prog}"
+  fi
+
+  PKG_CHECK_MODULES(XFT, xft >= 0.13.0, , HAVE_XFT=no)
+  if test "$HAVE_XFT" != no; then
+    OLD_CFLAGS="$CPPFLAGS"
+    OLD_CPPFLAGS="$CFLAGS"
+    OLD_LIBS="$LIBS"
+    CPPFLAGS="$CPPFLAGS $XFT_CFLAGS"
+    CFLAGS="$CFLAGS $XFT_CFLAGS"
+    LIBS="$XFT_LIBS $LIBS"
+    AC_CHECK_HEADER(X11/Xft/Xft.h,
+      [AC_CHECK_LIB(Xft, XftFontOpen, HAVE_XFT=yes, , $XFT_LIBS)])
+
+    if test "${HAVE_XFT}" = "yes"; then
+      AC_DEFINE(HAVE_XFT, 1, [Define to 1 if you have the Xft library.])
+      AC_SUBST(XFT_LIBS)
+      C_SWITCH_X_SITE="$C_SWITCH_X_SITE $XFT_CFLAGS"
+    else
+      CFLAGS="$OLD_CPPFLAGS"
+      CFLAGS="$OLD_CFLAGS"
+      LIBS="$OLD_LIBS"
+    fi
+  fi
+fi
+
 dnl Do not put whitespace before the #include statements below.
 dnl Older compilers (eg sunos4 cc) choke on it.
 dnl Do not put whitespace before the #include statements below.
 dnl Older compilers (eg sunos4 cc) choke on it.
-if test x"${USE_X_TOOLKIT}" = xmaybe; then
-  if test x"${HAVE_X11R5}" = xyes; then
-    AC_MSG_CHECKING(X11 version 5 with Xaw)
-    AC_CACHE_VAL(emacs_cv_x11_version_5_with_xaw,
+HAVE_XAW3D=no
+if test x"${USE_X_TOOLKIT}" = xmaybe || test x"${USE_X_TOOLKIT}" = xLUCID; then
+  if test "$with_xaw3d" != no; then
+    AC_MSG_CHECKING(for xaw3d)
+    AC_CACHE_VAL(emacs_cv_xaw3d,
+    [AC_TRY_LINK([
+#include <X11/Intrinsic.h>
+#include <X11/Xaw3d/Simple.h>],
+      [],
+      emacs_cv_xaw3d=yes,
+      emacs_cv_xaw3d=no)])
+  else
+    emacs_cv_xaw3d=no
+  fi
+  if test $emacs_cv_xaw3d = yes; then
+    AC_MSG_RESULT([yes; using Lucid toolkit])
+    USE_X_TOOLKIT=LUCID
+    HAVE_XAW3D=yes
+    AC_DEFINE(HAVE_XAW3D, 1,
+              [Define to 1 if you have the Xaw3d library (-lXaw3d).])
+  else
+    AC_MSG_RESULT(no)
+    AC_MSG_CHECKING(for libXaw)
+    AC_CACHE_VAL(emacs_cv_xaw,
     [AC_TRY_LINK([
 #include <X11/Intrinsic.h>
 #include <X11/Xaw/Simple.h>],
       [],
     [AC_TRY_LINK([
 #include <X11/Intrinsic.h>
 #include <X11/Xaw/Simple.h>],
       [],
-      emacs_cv_x11_version_5_with_xaw=yes,
-      emacs_cv_x11_version_5_with_xaw=no)])
-    if test $emacs_cv_x11_version_5_with_xaw = yes; then
-      AC_MSG_RESULT([5 or newer, with Xaw; use toolkit by default])
+      emacs_cv_xaw=yes,
+      emacs_cv_xaw=no)])
+    if test $emacs_cv_xaw = yes; then
+      AC_MSG_RESULT([yes; using Lucid toolkit])
       USE_X_TOOLKIT=LUCID
       USE_X_TOOLKIT=LUCID
+    elif test x"${USE_X_TOOLKIT}" = xLUCID; then
+      AC_MSG_ERROR([Lucid toolkit requires X11/Xaw include files])
     else
     else
-      AC_MSG_RESULT(before 5 or no Xaw; do not use toolkit by default)
+      AC_MSG_RESULT([no; do not use toolkit by default])
       USE_X_TOOLKIT=none
     fi
       USE_X_TOOLKIT=none
     fi
-  else
-    USE_X_TOOLKIT=none
   fi
 fi
 
   fi
 fi
 
@@ -2173,21 +2404,6 @@ Motif version prior to 2.1.
   fi
 fi
 
   fi
 fi
 
-### Is -lXaw3d available?
-HAVE_XAW3D=no
-if test "${HAVE_X11}" = "yes"; then
-  if test "${USE_X_TOOLKIT}" != "none"; then
-    dnl Fixme: determine what Scrollbar.h needs to avoid compilation
-    dnl errors from the test without the `-'.
-    AC_CHECK_HEADER(X11/Xaw3d/Scrollbar.h,
-       [AC_CHECK_LIB(Xaw3d, XawScrollbarSetThumb, HAVE_XAW3D=yes)], , -)
-    if test "${HAVE_XAW3D}" = "yes"; then
-       AC_DEFINE(HAVE_XAW3D, 1,
-                 [Define to 1 if you have the Xaw3d library (-lXaw3d).])
-    fi
-  fi
-fi
-
 dnl Use toolkit scroll bars if configured for GTK or X toolkit and either
 dnl using Motif or Xaw3d is available, and unless
 dnl --with-toolkit-scroll-bars=no was specified.
 dnl Use toolkit scroll bars if configured for GTK or X toolkit and either
 dnl using Motif or Xaw3d is available, and unless
 dnl --with-toolkit-scroll-bars=no was specified.
@@ -2219,8 +2435,8 @@ AC_TRY_COMPILE([
          #include <X11/Xlib.h>
          #include <X11/Xresource.h>],
         [XIMProc  callback;],
          #include <X11/Xlib.h>
          #include <X11/Xresource.h>],
         [XIMProc  callback;],
-        HAVE_XIM=yes
-        AC_DEFINE(HAVE_XIM, 1, [Define to 1 if XIM is available]),
+        [HAVE_XIM=yes
+        AC_DEFINE(HAVE_XIM, 1, [Define to 1 if XIM is available])],
         HAVE_XIM=no)
 
 dnl `--with-xim' now controls only the initial value of use_xim at run time.
         HAVE_XIM=no)
 
 dnl `--with-xim' now controls only the initial value of use_xim at run time.
@@ -2270,7 +2486,7 @@ HAVE_XPM=no
 if test "${HAVE_X11}" = "yes"; then
   if test "${with_xpm}" != "no"; then
     AC_CHECK_HEADER(X11/xpm.h,
 if test "${HAVE_X11}" = "yes"; then
   if test "${with_xpm}" != "no"; then
     AC_CHECK_HEADER(X11/xpm.h,
-      AC_CHECK_LIB(Xpm, XpmReadFileToPixmap, HAVE_XPM=yes, , -lX11))
+      [AC_CHECK_LIB(Xpm, XpmReadFileToPixmap, HAVE_XPM=yes, , -lX11)])
     if test "${HAVE_XPM}" = "yes"; then
       AC_MSG_CHECKING(for XpmReturnAllocPixels preprocessor define)
       AC_EGREP_CPP(no_return_alloc_pixels,
     if test "${HAVE_XPM}" = "yes"; then
       AC_MSG_CHECKING(for XpmReturnAllocPixels preprocessor define)
       AC_EGREP_CPP(no_return_alloc_pixels,
@@ -2300,7 +2516,7 @@ if test "${HAVE_X11}" = "yes"; then
     dnl Checking for jpeglib.h can lose because of a redefinition of
     dnl  HAVE_STDLIB_H.
     AC_CHECK_HEADER(jerror.h,
     dnl Checking for jpeglib.h can lose because of a redefinition of
     dnl  HAVE_STDLIB_H.
     AC_CHECK_HEADER(jerror.h,
-      AC_CHECK_LIB(jpeg, jpeg_destroy_compress, HAVE_JPEG=yes))
+      [AC_CHECK_LIB(jpeg, jpeg_destroy_compress, HAVE_JPEG=yes)])
   fi
 
   AH_TEMPLATE(HAVE_JPEG, [Define to 1 if you have the jpeg library (-ljpeg).])dnl
   fi
 
   AH_TEMPLATE(HAVE_JPEG, [Define to 1 if you have the jpeg library (-ljpeg).])dnl
@@ -2310,7 +2526,7 @@ if test "${HAVE_X11}" = "yes"; then
         [#include <jpeglib.h>
         version=JPEG_LIB_VERSION
 ],
         [#include <jpeglib.h>
         version=JPEG_LIB_VERSION
 ],
-        AC_DEFINE(HAVE_JPEG),
+        [AC_DEFINE(HAVE_JPEG)],
         [AC_MSG_WARN([libjpeg found, but not version 6b or later])
         HAVE_JPEG=no])
   fi
         [AC_MSG_WARN([libjpeg found, but not version 6b or later])
         HAVE_JPEG=no])
   fi
@@ -2338,10 +2554,10 @@ HAVE_TIFF=no
 if test "${HAVE_X11}" = "yes"; then
   if test "${with_tiff}" != "no"; then
     AC_CHECK_HEADER(tiffio.h,
 if test "${HAVE_X11}" = "yes"; then
   if test "${with_tiff}" != "no"; then
     AC_CHECK_HEADER(tiffio.h,
-      tifflibs="-lz -lm"
+      [tifflibs="-lz -lm"
       # At least one tiff package requires the jpeg library.
       if test "${HAVE_JPEG}" = yes; then tifflibs="-ljpeg $tifflibs"; fi
       # At least one tiff package requires the jpeg library.
       if test "${HAVE_JPEG}" = yes; then tifflibs="-ljpeg $tifflibs"; fi
-      AC_CHECK_LIB(tiff, TIFFGetVersion, HAVE_TIFF=yes, , $tifflibs))
+      AC_CHECK_LIB(tiff, TIFFGetVersion, HAVE_TIFF=yes, , $tifflibs)])
   fi
 
   if test "${HAVE_TIFF}" = "yes"; then
   fi
 
   if test "${HAVE_TIFF}" = "yes"; then
@@ -2349,23 +2565,71 @@ if test "${HAVE_X11}" = "yes"; then
   fi
 fi
 
   fi
 fi
 
-### Use -lgif if available, unless `--with-gif=no'.
+### Use -lgif or -lungif if available, unless `--with-gif=no'.
 HAVE_GIF=no
 HAVE_GIF=no
-if test "${HAVE_X11}" = "yes"; then
-  if test "${with_gif}" != "no"; then
-    AC_CHECK_HEADER(gif_lib.h,
+if test "${HAVE_X11}" = "yes" && test "${with_gif}" != "no"; then
+  AC_CHECK_HEADER(gif_lib.h,
 # EGifPutExtensionLast only exists from version libungif-4.1.0b1.
 # Earlier versions can crash Emacs.
 # EGifPutExtensionLast only exists from version libungif-4.1.0b1.
 # Earlier versions can crash Emacs.
-      AC_CHECK_LIB(ungif, EGifPutExtensionLast, HAVE_GIF=yes))
+    [AC_CHECK_LIB(gif, EGifPutExtensionLast, HAVE_GIF=yes, try_libungif=yes)])
+
+  if test "$HAVE_GIF" = yes; then
+      ac_gif_lib_name="-lgif"
+  fi
+
+# If gif_lib.h but no libgif, try libungif.
+  if test x"$try_libungif" = xyes; then
+    AC_CHECK_LIB(ungif, EGifPutExtensionLast, HAVE_GIF=yes)
+
+    if test "$HAVE_GIF" = yes; then
+      AC_DEFINE(LIBGIF, -lungif, [Compiler option to link with the gif library (if not -lgif).])
+      ac_gif_lib_name="-lungif"
+    fi
   fi
 
   if test "${HAVE_GIF}" = "yes"; then
   fi
 
   if test "${HAVE_GIF}" = "yes"; then
-    AC_DEFINE(HAVE_GIF, 1, [Define to 1 if you have the ungif library (-lungif).])
+    AC_DEFINE(HAVE_GIF, 1, [Define to 1 if you have a gif library (default -lgif; otherwise specify with LIBGIF).])
+  fi
+fi
+
+dnl Check for required libraries.
+if test "${HAVE_X11}" = "yes"; then
+  MISSING=""
+  WITH_NO=""
+  test "${with_xpm}" != "no" && test "${HAVE_XPM}" != "yes" &&
+    MISSING="libXpm" && WITH_NO="--with-xpm=no"
+  test "${with_jpeg}" != "no" && test "${HAVE_JPEG}" != "yes" &&
+    MISSING="$MISSING libjpeg" && WITH_NO="$WITH_NO --with-jpeg=no"
+  test "${with_png}" != "no" && test "${HAVE_PNG}" != "yes" &&
+    MISSING="$MISSING libpng" && WITH_NO="$WITH_NO --with-png=no"
+  test "${with_gif}" != "no" && test "${HAVE_GIF}" != "yes" &&
+    MISSING="$MISSING libgif/libungif" && WITH_NO="$WITH_NO --with-gif=no"
+  test "${with_tiff}" != "no" && test "${HAVE_TIFF}" != "yes" &&
+    MISSING="$MISSING libtiff" && WITH_NO="$WITH_NO --with-tiff=no"
+
+  if test "X${MISSING}" != X; then
+    AC_MSG_ERROR([The following required libraries were not found:
+    $MISSING
+Maybe some development libraries/packages are missing?
+If you don't want to link with them give
+    $WITH_NO
+as options to configure])
   fi
 fi
 
   fi
 fi
 
+### Use -lgpm if available, unless `--with-gpm=no'.
+HAVE_GPM=no
+if test "${with_gpm}" != "no"; then
+  AC_CHECK_HEADER(gpm.h,
+    [AC_CHECK_LIB(gpm, Gpm_Open, HAVE_GPM=yes)])
+fi
+
+if test "${HAVE_GPM}" = "yes"; then
+  AC_DEFINE(HAVE_GPM, 1, [Define to 1 if you have the gpm library (-lgpm).])
+fi
+
 dnl Check for malloc/malloc.h on darwin
 dnl Check for malloc/malloc.h on darwin
-AC_CHECK_HEADER(malloc/malloc.h, AC_DEFINE(HAVE_MALLOC_MALLOC_H, 1, [Define to 1 if you have the <malloc/malloc.h> header file.]))
+AC_CHECK_HEADER(malloc/malloc.h, [AC_DEFINE(HAVE_MALLOC_MALLOC_H, 1, [Define to 1 if you have the <malloc/malloc.h> header file.])])
 
 ### Use Mac OS X Carbon API to implement GUI.
 if test "${HAVE_CARBON}" = "yes"; then
 
 ### Use Mac OS X Carbon API to implement GUI.
 if test "${HAVE_CARBON}" = "yes"; then
@@ -2380,22 +2644,13 @@ if test "${HAVE_CARBON}" = "yes"; then
   fi
   # We also have mouse menus.
   HAVE_MENUS=yes
   fi
   # We also have mouse menus.
   HAVE_MENUS=yes
-
-  tmp_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -framework Carbon"
-  AC_CHECK_FUNC(CancelMenuTracking, have_cmt=yes, have_cmt=no)
-  if test "$have_cmt" = yes; then
-    AC_DEFINE(HAVE_CANCELMENUTRACKING, 1,
-              [Define to 1 if CancelMenuTracking is available (Mac OSX).])
-  fi
-  CFLAGS="$tmp_CFLAGS"
 fi
 
 ### Use session management (-lSM -lICE) if available
 HAVE_X_SM=no
 if test "${HAVE_X11}" = "yes"; then
   AC_CHECK_HEADER(X11/SM/SMlib.h,
 fi
 
 ### Use session management (-lSM -lICE) if available
 HAVE_X_SM=no
 if test "${HAVE_X11}" = "yes"; then
   AC_CHECK_HEADER(X11/SM/SMlib.h,
-    AC_CHECK_LIB(SM, SmcOpenConnection, HAVE_X_SM=yes, , -lICE))
+    [AC_CHECK_LIB(SM, SmcOpenConnection, HAVE_X_SM=yes, , -lICE)])
 
   if test "${HAVE_X_SM}" = "yes"; then
     AC_DEFINE(HAVE_X_SM, 1, [Define to 1 if you have the SM library (-lSM).])
 
   if test "${HAVE_X_SM}" = "yes"; then
     AC_DEFINE(HAVE_X_SM, 1, [Define to 1 if you have the SM library (-lSM).])
@@ -2418,6 +2673,13 @@ fi
 
 AC_FUNC_ALLOCA
 
 
 AC_FUNC_ALLOCA
 
+dnl src/alloca.c has been removed.  Could also check if $ALLOCA is set?
+dnl FIXME is there an autoconf test that does the right thing, without
+dnl needing to call A_M_E afterwards?
+if test x"$ac_cv_func_alloca_works" != xyes; then
+   AC_MSG_ERROR( [a system implementation of alloca is required] )
+fi
+
 # fmod, logb, and frexp are found in -lm on most systems.
 # On HPUX 9.01, -lm does not contain logb, so check for sqrt.
 AC_CHECK_LIB(m, sqrt)
 # fmod, logb, and frexp are found in -lm on most systems.
 # On HPUX 9.01, -lm does not contain logb, so check for sqrt.
 AC_CHECK_LIB(m, sqrt)
@@ -2447,12 +2709,12 @@ AC_CHECK_HEADERS(maillock.h)
 
 AC_CHECK_FUNCS(gethostname getdomainname dup2 \
 rename closedir mkdir rmdir sysinfo getrusage get_current_dir_name \
 
 AC_CHECK_FUNCS(gethostname getdomainname dup2 \
 rename closedir mkdir rmdir sysinfo getrusage get_current_dir_name \
-random lrand48 bcopy bcmp logb frexp fmod rint cbrt ftime res_init setsid \
+random lrand48 bcopy bcmp logb frexp fmod rint cbrt ftime setsid \
 strerror fpathconf select mktime euidaccess getpagesize tzset setlocale \
 utimes setrlimit setpgid getcwd getwd shutdown getaddrinfo \
 __fpending mblen mbrlen mbsinit strsignal setitimer ualarm index rindex \
 sendto recvfrom getsockopt setsockopt getsockname getpeername \
 strerror fpathconf select mktime euidaccess getpagesize tzset setlocale \
 utimes setrlimit setpgid getcwd getwd shutdown getaddrinfo \
 __fpending mblen mbrlen mbsinit strsignal setitimer ualarm index rindex \
 sendto recvfrom getsockopt setsockopt getsockname getpeername \
-gai_strerror mkstemp getline getdelim mremap memmove fsync bzero \
+gai_strerror mkstemp getline getdelim mremap memmove fsync sync bzero \
 memset memcmp difftime memcpy mempcpy mblen mbrlen posix_memalign)
 
 AC_CHECK_HEADERS(sys/un.h)
 memset memcmp difftime memcpy mempcpy mblen mbrlen posix_memalign)
 
 AC_CHECK_HEADERS(sys/un.h)
@@ -2491,26 +2753,53 @@ AC_CHECK_FUNCS(getpt)
 # than to expect to find it in ncurses.
 AC_CHECK_LIB(ncurses, tparm)
 
 # than to expect to find it in ncurses.
 AC_CHECK_LIB(ncurses, tparm)
 
+# Do we have res_init, for detecting changes in /etc/resolv.conf?
+
+resolv=no
+AC_CHECK_FUNC(res_init, have_res_init=yes, have_res_init=no)
+if test "$have_res_init" = no; then
+  OLIBS="$LIBS"
+  LIBS="$LIBS -lresolv"
+  AC_MSG_CHECKING(for res_init with -lresolv)
+  AC_TRY_LINK([#include <netinet/in.h>
+#include <arpa/nameser.h>
+#include <resolv.h> ],
+    [res_init();],
+    have_res_init=yes, have_res_init=no)
+  AC_MSG_RESULT($have_res_init)
+  if test "$have_res_init" = yes ; then
+    resolv=yes
+  fi
+  LIBS="$OLIBS"
+fi
+
+if test "$have_res_init" = yes; then
+  AC_DEFINE(HAVE_RES_INIT, 1, [Define to 1 if res_init is available.])
+fi
+
 # Do we need the Hesiod library to provide the support routines?
 if test "$with_hesiod" = yes ; then
   # Don't set $LIBS here -- see comments above.
 # Do we need the Hesiod library to provide the support routines?
 if test "$with_hesiod" = yes ; then
   # Don't set $LIBS here -- see comments above.
-  resolv=no
   AC_CHECK_FUNC(res_send, , [AC_CHECK_FUNC(__res_send, ,
      [AC_CHECK_LIB(resolv, res_send, resolv=yes,
                  [AC_CHECK_LIB(resolv, __res_send, resolv=yes)])])])
   if test "$resolv" = yes ; then
     RESOLVLIB=-lresolv
   AC_CHECK_FUNC(res_send, , [AC_CHECK_FUNC(__res_send, ,
      [AC_CHECK_LIB(resolv, res_send, resolv=yes,
                  [AC_CHECK_LIB(resolv, __res_send, resolv=yes)])])])
   if test "$resolv" = yes ; then
     RESOLVLIB=-lresolv
-    AC_DEFINE(HAVE_LIBRESOLV, 1,
-             [Define to 1 if you have the resolv library (-lresolv).])
   else
     RESOLVLIB=
   fi
   AC_CHECK_FUNC(hes_getmailhost, , [AC_CHECK_LIB(hesiod, hes_getmailhost,
   else
     RESOLVLIB=
   fi
   AC_CHECK_FUNC(hes_getmailhost, , [AC_CHECK_LIB(hesiod, hes_getmailhost,
-       AC_DEFINE(HAVE_LIBHESIOD, 1,
-                 [Define to 1 if you have the hesiod library (-lhesiod).]),
+       [AC_DEFINE(HAVE_LIBHESIOD, 1,
+                 [Define to 1 if you have the hesiod library (-lhesiod).])],
        :, $RESOLVLIB)])
 fi
 
        :, $RESOLVLIB)])
 fi
 
+# Do we need libresolv (due to res_init or Hesiod)?
+if test "$resolv" = yes ; then
+  AC_DEFINE(HAVE_LIBRESOLV, 1,
+            [Define to 1 if you have the resolv library (-lresolv).])
+fi
+
 # These tell us which Kerberos-related libraries to use.
 if test "${with_kerberos+set}" = set; then
   AC_CHECK_LIB(com_err, com_err)
 # These tell us which Kerberos-related libraries to use.
 if test "${with_kerberos+set}" = set; then
   AC_CHECK_LIB(com_err, com_err)
@@ -2519,9 +2808,9 @@ if test "${with_kerberos+set}" = set; then
   AC_CHECK_LIB(krb5, krb5_init_context)
   if test "${with_kerberos5+set}" != set; then
     AC_CHECK_LIB(des425, des_cbc_encrypt,,
   AC_CHECK_LIB(krb5, krb5_init_context)
   if test "${with_kerberos5+set}" != set; then
     AC_CHECK_LIB(des425, des_cbc_encrypt,,
-                AC_CHECK_LIB(des, des_cbc_encrypt))
+                [AC_CHECK_LIB(des, des_cbc_encrypt)])
     AC_CHECK_LIB(krb4, krb_get_cred,,
     AC_CHECK_LIB(krb4, krb_get_cred,,
-                AC_CHECK_LIB(krb, krb_get_cred))
+                [AC_CHECK_LIB(krb, krb_get_cred)])
   fi
 
   if test "${with_kerberos5+set}" = set; then
   fi
 
   if test "${with_kerberos5+set}" = set; then
@@ -2613,38 +2902,6 @@ if test "x$HAVE_TIMEVAL" = xyes; then
   fi
 fi
 
   fi
 fi
 
-# This defines (or not) HAVE_TZNAME and HAVE_TM_ZONE.
-AC_STRUCT_TIMEZONE
-
-dnl Note that AC_STRUCT_TIMEZONE doesn't do what you might expect.
-if test "$ac_cv_func_gettimeofday" = yes; then
-  AC_CACHE_CHECK([for struct timezone], emacs_cv_struct_timezone,
-    [AC_TRY_COMPILE([#include <sys/time.h>],
-    [struct timezone tz;],
-    dnl It may be that we can't call gettimeofday with a non-null pointer,
-    dnl even though we have struct timezone (e.g. HPUX).  In that case
-    dnl we'll lie about struct timezone.
-    [AC_TRY_RUN([
-#ifdef TIME_WITH_SYS_TIME
-#include <sys/time.h>
-#include <time.h>
-#else
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#else
-#include <time.h>
-#endif
-#endif
-main () {
-  struct timeval time;
-  struct timezone dummy;
-  exit (gettimeofday (&time, &dummy));
-}],
-      emacs_cv_struct_timezone=yes,
-      emacs_cv_struct_timezone=no, emacs_cv_struct_timezone=yes)],
-    emacs_cv_struct_timezone=no)])
-fi
-
 ok_so_far=yes
 AC_CHECK_FUNC(socket, , ok_so_far=no)
 if test $ok_so_far = yes; then
 ok_so_far=yes
 AC_CHECK_FUNC(socket, , ok_so_far=no)
 if test $ok_so_far = yes; then
@@ -2836,15 +3093,16 @@ if test "${REL_ALLOC}" = "yes" ; then
             buffer space.])
 fi
 
             buffer space.])
 fi
 
+
 AH_TOP([/* GNU Emacs site configuration template file.
 AH_TOP([/* GNU Emacs site configuration template file.
-   Copyright (C) 1988, 1993, 1994, 1999, 2000, 2002, 2004
+   Copyright (C) 1988, 1993, 1994, 1999, 2000, 2001, 2002, 2004, 2005, 2006, 2007
              Free Software Foundation, Inc.
 
 This file is part of GNU Emacs.
 
 GNU Emacs is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
              Free Software Foundation, Inc.
 
 This file is part of GNU Emacs.
 
 GNU Emacs is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
 any later version.
 
 GNU Emacs is distributed in the hope that it will be useful,
 any later version.
 
 GNU Emacs is distributed in the hope that it will be useful,
@@ -2873,6 +3131,13 @@ AH_BOTTOM([
 #define HAVE_MOUSE
 #endif
 
 #define HAVE_MOUSE
 #endif
 
+/* Multi-tty support relies on MULTI_KBOARD.  It seems safe to turn it
+   on unconditionally.  Note that src/s/darwin.h disables this at
+   present.  */
+#ifndef MULTI_KBOARD
+#define MULTI_KBOARD
+#endif
+
 /* If we're using the Carbon API on Mac OS X, define a few more
    variables as well.  */
 #ifdef HAVE_CARBON
 /* If we're using the Carbon API on Mac OS X, define a few more
    variables as well.  */
 #ifdef HAVE_CARBON
@@ -2913,6 +3178,9 @@ AH_BOTTOM([
 #ifdef HAVE_SOUNDCARD_H
 #define HAVE_SOUND 1
 #endif
 #ifdef HAVE_SOUNDCARD_H
 #define HAVE_SOUND 1
 #endif
+#ifdef HAVE_ALSA
+#define HAVE_SOUND 1
+#endif
 #endif /* __FreeBSD__ || __NetBSD__ || __linux__  */
 
 /* If using GNU, then support inline function declarations. */
 #endif /* __FreeBSD__ || __NetBSD__ || __linux__  */
 
 /* If using GNU, then support inline function declarations. */
@@ -3069,7 +3337,7 @@ typedef unsigned size_t;
 
 #ifdef HAVE_X11R6
 #define HAVE_X_I18N
 
 #ifdef HAVE_X11R6
 #define HAVE_X_I18N
-#elif defined HAVE_X11R5 && !defined X11R5_INHIBIT_I18N
+#elif !defined X11R5_INHIBIT_I18N
 #define HAVE_X_I18N
 #endif
 
 #define HAVE_X_I18N
 #endif
 
@@ -3160,8 +3428,10 @@ echo "  Does Emacs use -lXaw3d?                                 ${HAVE_XAW3D}"
 echo "  Does Emacs use -lXpm?                                   ${HAVE_XPM}"
 echo "  Does Emacs use -ljpeg?                                  ${HAVE_JPEG}"
 echo "  Does Emacs use -ltiff?                                  ${HAVE_TIFF}"
 echo "  Does Emacs use -lXpm?                                   ${HAVE_XPM}"
 echo "  Does Emacs use -ljpeg?                                  ${HAVE_JPEG}"
 echo "  Does Emacs use -ltiff?                                  ${HAVE_TIFF}"
-echo "  Does Emacs use -lungif?                                 ${HAVE_GIF}"
+echo "  Does Emacs use a gif library?                           ${HAVE_GIF} $ac_gif_lib_name"
 echo "  Does Emacs use -lpng?                                   ${HAVE_PNG}"
 echo "  Does Emacs use -lpng?                                   ${HAVE_PNG}"
+echo "  Does Emacs use -lrsvg-2?                                ${HAVE_RSVG}"
+echo "  Does Emacs use -lgpm?                                   ${HAVE_GPM}"
 echo "  Does Emacs use X toolkit scroll bars?                   ${USE_TOOLKIT_SCROLL_BARS}"
 echo
 
 echo "  Does Emacs use X toolkit scroll bars?                   ${USE_TOOLKIT_SCROLL_BARS}"
 echo
 
@@ -3171,6 +3441,24 @@ if test $USE_XASSERTS = yes; then
    echo
 fi
 
    echo
 fi
 
+if test "$USE_X_TOOLKIT" = GTK; then
+  case "$canonical" in
+  *cygwin*)
+    echo "There are known problems with Emacs and Gtk+ on cygwin, so you
+  will probably get a crash on startup.  If this happens, please use another
+  toolkit for Emacs.  See etc/PROBLEMS for more information."
+  ;;
+  esac
+fi
+
+
+if test "$HAVE_CARBON" = "yes"; then
+   echo
+   echo "Warning: The Mac Carbon port is currently unsupported and has
+known problems.  It is not recommended for use by non-developers.
+Read the emacs-devel archives for more information."
+   echo
+fi 
 
 
 # Remove any trailing slashes in these variables.
 
 
 # Remove any trailing slashes in these variables.
@@ -3190,8 +3478,9 @@ AC_EGREP_CPP(yes..yes,
        CPP_NEED_TRADITIONAL=yes)
 
 AC_OUTPUT(Makefile lib-src/Makefile.c:lib-src/Makefile.in oldXMenu/Makefile \
        CPP_NEED_TRADITIONAL=yes)
 
 AC_OUTPUT(Makefile lib-src/Makefile.c:lib-src/Makefile.in oldXMenu/Makefile \
-       man/Makefile lwlib/Makefile src/Makefile.c:src/Makefile.in \
-       lisp/Makefile lispref/Makefile lispintro/Makefile leim/Makefile, [
+       doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile \
+       doc/lispref/Makefile src/Makefile.c:src/Makefile.in \
+       lwlib/Makefile lisp/Makefile leim/Makefile, [
 
 ### Make the necessary directories, if they don't exist.
 for dir in etc lisp ; do
 
 ### Make the necessary directories, if they don't exist.
 for dir in etc lisp ; do