Avoid character to byte conversions in motion subroutines.
[bpt/emacs.git] / src / window.c
index 3fca5b7..7769613 100644 (file)
@@ -1,7 +1,7 @@
 /* Window creation, deletion and examination for GNU Emacs.
    Does not include redisplay.
-   Copyright (C) 1985-1987, 1993-1998, 2000-2012
-                 Free Software Foundation, Inc.
+   Copyright (C) 1985-1987, 1993-1998, 2000-2013 Free Software
+   Foundation, Inc.
 
 This file is part of GNU Emacs.
 
@@ -87,6 +87,7 @@ static Lisp_Object window_list_1 (Lisp_Object, Lisp_Object, Lisp_Object);
 static int window_resize_check (struct window *, int);
 static void window_resize_apply (struct window *, int);
 static Lisp_Object select_window (Lisp_Object, Lisp_Object, int);
+static void select_window_1 (Lisp_Object, bool);
 
 /* This is the window in which the terminal's cursor should
    be left when nothing is being done with it.  This must
@@ -115,9 +116,6 @@ Lisp_Object minibuf_selected_window;
 /* Hook run at end of temp_output_buffer_show.  */
 static Lisp_Object Qtemp_buffer_show_hook;
 
-/* Incremented for each window created.  */
-static int sequence_number;
-
 /* Nonzero after init_window_once has finished.  */
 static int window_initialized;
 
@@ -285,6 +283,9 @@ adjust_window_count (struct window *w, int arg)
        b = b->base_buffer;
       b->window_count += arg;
       eassert (b->window_count >= 0);
+      /* These should be recalculated by redisplay code.  */
+      w->window_end_valid = 0;
+      w->base_line_pos = 0;
     }
 }
 
@@ -299,15 +300,6 @@ wset_buffer (struct window *w, Lisp_Object val)
   adjust_window_count (w, 1);
 }
 
-/* Build a frequently used 4-integer (X Y W H) list.  */
-
-static Lisp_Object
-list4i (EMACS_INT x, EMACS_INT y, EMACS_INT w, EMACS_INT h)
-{
-  return list4 (make_number (x), make_number (y),
-               make_number (w), make_number (h));
-}
-
 DEFUN ("windowp", Fwindowp, Swindowp, 1, 1, 0,
        doc: /* Return t if OBJECT is a window and nil otherwise.  */)
   (Lisp_Object object)
@@ -532,7 +524,7 @@ select_window (Lisp_Object window, Lisp_Object norecord, int inhibit_point_swap)
 /* Select window with a minimum of fuss, i.e. don't record the change anywhere
    (not even for redisplay's benefit), and assume that the window's frame is
    already selected.  */
-void
+static void
 select_window_1 (Lisp_Object window, bool inhibit_point_swap)
 {
   /* Store the old selected window's buffer's point in pointm of the old
@@ -1435,7 +1427,7 @@ window were selected.
 
 Note that, when WINDOW is selected, the value returned is the same as
 that returned by `point' for WINDOW's buffer.  It would be more strictly
-correct to return the `top-level' value of `point', outside of any
+correct to return the top-level value of `point', outside of any
 `save-excursion' forms.  But that is hard to define.  */)
   (Lisp_Object window)
 {
@@ -1488,17 +1480,8 @@ if it isn't already recorded.  */)
   CHECK_BUFFER (buf);
   b = XBUFFER (buf);
 
-#if 0 /* This change broke some things.  We should make it later.  */
-  /* If we don't know the end position, return nil.
-     The user can compute it with vertical-motion if he wants to.
-     It would be nicer to do it automatically,
-     but that's so slow that it would probably bother people.  */
-  if (NILP (w->window_end_valid))
-    return Qnil;
-#endif
-
   if (! NILP (update)
-      && (windows_or_buffers_changed || NILP (w->window_end_valid))
+      && (windows_or_buffers_changed || !w->window_end_valid)
       && !noninteractive)
     {
       struct text_pos startp;
@@ -1552,7 +1535,7 @@ Return POS.  */)
 {
   register struct window *w = decode_live_window (window);
 
-  CHECK_NUMBER_COERCE_MARKER (pos);
+  /* Type of POS is checked by Fgoto_char or set_marker_restricted ...  */
 
   if (w == XWINDOW (selected_window))
     {
@@ -1562,6 +1545,8 @@ Return POS.  */)
        {
          struct buffer *old_buffer = current_buffer;
 
+         /* ... but here we want to catch type error before buffer change.  */
+         CHECK_NUMBER_COERCE_MARKER (pos);
          set_buffer_internal (XBUFFER (w->buffer));
          Fgoto_char (pos);
          set_buffer_internal (old_buffer);
@@ -1587,9 +1572,8 @@ overriding motion of point in order to display at this exact start.  */)
 {
   register struct window *w = decode_live_window (window);
 
-  CHECK_NUMBER_COERCE_MARKER (pos);
   set_marker_restricted (w->start, pos, w->buffer);
-  /* this is not right, but much easier than doing what is right. */
+  /* This is not right, but much easier than doing what is right.  */
   w->start_at_line_beg = 0;
   if (NILP (noforce))
     w->force_start = 1;
@@ -1705,7 +1689,7 @@ Return nil if window display is not up-to-date.  In that case, use
   b = XBUFFER (w->buffer);
 
   /* Fail if current matrix is not up-to-date.  */
-  if (NILP (w->window_end_valid)
+  if (!w->window_end_valid
       || current_buffer->clip_changed
       || current_buffer->prevent_redisplay_optimizations_p
       || w->last_modified < BUF_MODIFF (b)
@@ -2037,7 +2021,7 @@ replace_window (Lisp_Object old, Lisp_Object new, int setflag)
       n->pseudo_window_p = 0;
       wset_window_end_vpos (n, make_number (0));
       wset_window_end_pos (n, make_number (0));
-      wset_window_end_valid (n, Qnil);
+      n->window_end_valid = 0;
       n->frozen_window_start_p = 0;
     }
 
@@ -2237,7 +2221,6 @@ candidate_window_p (Lisp_Object window, Lisp_Object owindow, Lisp_Object minibuf
     }
   else if (EQ (all_frames, Qvisible))
     {
-      FRAME_SAMPLE_VISIBILITY (f);
       candidate_p = FRAME_VISIBLE_P (f)
        && (FRAME_TERMINAL (XFRAME (w->frame))
            == FRAME_TERMINAL (XFRAME (selected_frame)));
@@ -2245,7 +2228,6 @@ candidate_window_p (Lisp_Object window, Lisp_Object owindow, Lisp_Object minibuf
     }
   else if (INTEGERP (all_frames) && XINT (all_frames) == 0)
     {
-      FRAME_SAMPLE_VISIBILITY (f);
       candidate_p = (FRAME_VISIBLE_P (f) || FRAME_ICONIFIED_P (f)
 #ifdef HAVE_X_WINDOWS
                     /* Yuck!!  If we've just created the frame and the
@@ -2761,7 +2743,7 @@ window-start value is reasonable when this function is called.  */)
   struct window *w, *r, *s;
   struct frame *f;
   Lisp_Object sibling, pwindow, swindow IF_LINT (= Qnil), delta;
-  ptrdiff_t startpos IF_LINT (= 0);
+  ptrdiff_t startpos IF_LINT (= 0), startbyte IF_LINT (= 0);
   int top IF_LINT (= 0), new_top, resize_failed;
 
   w = decode_valid_window (window);
@@ -2800,6 +2782,7 @@ window-start value is reasonable when this function is called.  */)
   if (!NILP (w->buffer))
     {
       startpos = marker_position (w->start);
+      startbyte = marker_byte_position (w->start);
       top = WINDOW_TOP_EDGE_LINE (w)
        - FRAME_TOP_MARGIN (XFRAME (WINDOW_FRAME (w)));
       /* Make sure WINDOW is the frame's selected window.  */
@@ -2969,10 +2952,10 @@ window-start value is reasonable when this function is called.  */)
          Fset_buffer (w->buffer);
          /* This computation used to temporarily move point, but that
             can have unwanted side effects due to text properties.  */
-         pos = *vmotion (startpos, -top, w);
+         pos = *vmotion (startpos, startbyte, -top, w);
 
          set_marker_both (w->start, w->buffer, pos.bufpos, pos.bytepos);
-         wset_window_end_valid (w, Qnil);
+         w->window_end_valid = 0;
          w->start_at_line_beg = (pos.bytepos == BEGV_BYTE
                                    || FETCH_BYTE (pos.bytepos - 1) == '\n');
          /* We need to do this, so that the window-scroll-functions
@@ -3188,7 +3171,7 @@ set_window_buffer (Lisp_Object window, Lisp_Object buffer, int run_hooks_p, int
   wset_window_end_pos (w, make_number (0));
   wset_window_end_vpos (w, make_number (0));
   memset (&w->last_cursor, 0, sizeof w->last_cursor);
-  wset_window_end_valid (w, Qnil);
+
   if (!(keep_margins_p && samebuf))
     { /* If we're not actually changing the buffer, don't reset hscroll and
         vscroll.  This case happens for example when called from
@@ -3437,8 +3420,6 @@ make_parent_window (Lisp_Object window, int horflag)
   adjust_window_count (p, 1);
   XSETWINDOW (parent, p);
 
-  p->sequence_number = ++sequence_number;
-
   replace_window (window, parent, 1);
 
   wset_next (o, Qnil);
@@ -3487,7 +3468,7 @@ make_window (void)
   w->nrows_scale_factor = w->ncols_scale_factor = 1;
   w->phys_cursor_type = -1;
   w->phys_cursor_width = -1;
-  w->sequence_number = ++sequence_number;
+  w->column_number_displayed = -1;
 
   /* Reset window_list.  */
   Vwindow_list = Qnil;
@@ -3957,7 +3938,7 @@ set correctly.  See the code of `split-window' for how this is done.  */)
       wset_next (o, new);
     }
 
-  wset_window_end_valid (n, Qnil);
+  n->window_end_valid = 0;
   memset (&n->last_cursor, 0, sizeof n->last_cursor);
 
   /* Get special geometry settings from reference window.  */
@@ -4627,8 +4608,8 @@ window_scroll_pixel_based (Lisp_Object window, int n, int whole, int noerror)
        }
 
       /* Set the window start, and set up the window for redisplay.  */
-      set_marker_restricted (w->start, make_number (pos),
-                            w->buffer);
+      set_marker_restricted_both (w->start, w->buffer, IT_CHARPOS (it),
+                                 IT_BYTEPOS (it));
       bytepos = marker_byte_position (w->start);
       w->start_at_line_beg = (pos == BEGV || FETCH_BYTE (bytepos - 1) == '\n');
       w->update_mode_line = 1;
@@ -4768,7 +4749,8 @@ window_scroll_line_based (Lisp_Object window, int n, int whole, int noerror)
   register Lisp_Object tem;
   int lose;
   Lisp_Object bolp;
-  ptrdiff_t startpos;
+  ptrdiff_t startpos = marker_position (w->start);
+  ptrdiff_t startbyte = marker_byte_position (w->start);
   Lisp_Object original_pos = Qnil;
 
   /* If scrolling screen-fulls, compute the number of lines to
@@ -4776,8 +4758,6 @@ window_scroll_line_based (Lisp_Object window, int n, int whole, int noerror)
   if (whole)
     n *= max (1, ht - next_screen_context_lines);
 
-  startpos = marker_position (w->start);
-
   if (!NILP (Vscroll_preserve_screen_position))
     {
       if (window_scroll_preserve_vpos <= 0
@@ -4785,10 +4765,8 @@ window_scroll_line_based (Lisp_Object window, int n, int whole, int noerror)
          || NILP (Fget (KVAR (current_kboard, Vlast_command), Qscroll_command)))
        {
          struct position posit
-           = *compute_motion (startpos, 0, 0, 0,
-                              PT, ht, 0,
-                              -1, w->hscroll,
-                              0, w);
+           = *compute_motion (startpos, startbyte, 0, 0, 0,
+                              PT, ht, 0, -1, w->hscroll, 0, w);
          window_scroll_preserve_vpos = posit.vpos;
          window_scroll_preserve_hpos = posit.hpos + w->hscroll;
        }
@@ -4804,9 +4782,10 @@ window_scroll_line_based (Lisp_Object window, int n, int whole, int noerror)
     {
       Fvertical_motion (make_number (- (ht / 2)), window);
       startpos = PT;
+      startbyte = PT_BYTE;
     }
 
-  SET_PT (startpos);
+  SET_PT_BOTH (startpos, startbyte);
   lose = n < 0 && PT == BEGV;
   Fvertical_motion (make_number (n), window);
   pos = PT;
@@ -5184,7 +5163,7 @@ displayed_window_lines (struct window *w)
 
 DEFUN ("recenter", Frecenter, Srecenter, 0, 1, "P",
        doc: /* Center point in selected window and maybe redisplay frame.
-With prefix argument ARG, recenter putting point on screen line ARG
+With a numeric prefix argument ARG, recenter putting point on screen line ARG
 relative to the selected window.  If ARG is negative, it counts up from the
 bottom of the window.  (ARG should be less than the height of the window.)
 
@@ -5341,7 +5320,7 @@ and redisplay normally--don't erase and redraw the frame.  */)
 
          iarg = max (iarg, this_scroll_margin);
 
-         pos = *vmotion (PT, -iarg, w);
+         pos = *vmotion (PT, PT_BYTE, -iarg, w);
          charpos = pos.bufpos;
          bytepos = pos.bytepos;
        }
@@ -5360,14 +5339,14 @@ and redisplay normally--don't erase and redraw the frame.  */)
       iarg = clip_to_bounds (this_scroll_margin, iarg,
                             ht - this_scroll_margin - 1);
 
-      pos = *vmotion (PT, - iarg, w);
+      pos = *vmotion (PT, PT_BYTE, - iarg, w);
       charpos = pos.bufpos;
       bytepos = pos.bytepos;
     }
 
   /* Set the new window start.  */
   set_marker_both (w->start, w->buffer, charpos, bytepos);
-  wset_window_end_valid (w, Qnil);
+  w->window_end_valid = 0;
 
   w->optional_new_start = 1;
 
@@ -5807,8 +5786,7 @@ the return value is nil.  Otherwise the value is t.  */)
             {
               /* Set window markers at start of visible range.  */
               if (XMARKER (w->start)->buffer == 0)
-                set_marker_restricted (w->start, make_number (0),
-                                       w->buffer);
+                set_marker_restricted_both (w->start, w->buffer, 0, 0);
               if (XMARKER (w->pointm)->buffer == 0)
                 set_marker_restricted_both
                   (w->pointm, w->buffer,
@@ -5826,10 +5804,8 @@ the return value is nil.  Otherwise the value is t.  */)
              wset_buffer (w, other_buffer_safely (Fcurrent_buffer ()));
              /* This will set the markers to beginning of visible
                 range.  */
-             set_marker_restricted (w->start,
-                                    make_number (0), w->buffer);
-             set_marker_restricted (w->pointm,
-                                    make_number (0), w->buffer);
+             set_marker_restricted_both (w->start, w->buffer, 0, 0);
+             set_marker_restricted_both (w->pointm, w->buffer, 0, 0);
              w->start_at_line_beg = 1;
              if (!NILP (w->dedicated))
                /* Record this window as dead.  */
@@ -6202,11 +6178,11 @@ saved by this function.  */)
   data->minibuf_selected_window = minibuf_level > 0 ? minibuf_selected_window : Qnil;
   data->root_window = FRAME_ROOT_WINDOW (f);
   data->focus_frame = FRAME_FOCUS_FRAME (f);
-  tem = Fmake_vector (make_number (n_windows), Qnil);
+  tem = make_uninit_vector (n_windows);
   data->saved_windows = tem;
   for (i = 0; i < n_windows; i++)
     ASET (tem, i,
-         Fmake_vector (make_number (VECSIZE (struct saved_window)), Qnil));
+         Fmake_vector (make_number (VECSIZE (struct saved_window)), Qnil));
   save_window_save (FRAME_ROOT_WINDOW (f), XVECTOR (tem), 0);
   XSETWINDOW_CONFIGURATION (tem, data);
   return (tem);
@@ -6318,7 +6294,7 @@ display marginal areas and the text area.  */)
       adjust_window_margins (w);
 
       clear_glyph_matrix (w->current_matrix);
-      wset_window_end_valid (w, Qnil);
+      w->window_end_valid = 0;
 
       ++windows_or_buffers_changed;
       adjust_glyphs (XFRAME (WINDOW_FRAME (w)));
@@ -6388,7 +6364,7 @@ Fourth parameter HORIZONTAL-TYPE is currently unused.  */)
       adjust_window_margins (w);
 
       clear_glyph_matrix (w->current_matrix);
-      wset_window_end_valid (w, Qnil);
+      w->window_end_valid = 0;
 
       ++windows_or_buffers_changed;
       adjust_glyphs (XFRAME (WINDOW_FRAME (w)));
@@ -6792,7 +6768,8 @@ same combination.
 
 Other values are reserved for future use.
 
-This variable takes no effect if `window-combination-limit' is non-nil.  */);
+This variable takes no effect if the variable `window-combination-limit' is
+non-nil.  */);
   Vwindow_combination_resize = Qnil;
 
   DEFVAR_LISP ("window-combination-limit", Vwindow_combination_limit,