-#
-# Makefile definition file for building GNU Emacs on Windows NT
-#
-# GNU Emacs is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Emacs is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Emacs; see the file COPYING. If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
-#
-# Geoff Voelker (voelker@cs.washington.edu) 9-6-94
-
-#
-# BEGIN CONFIGURATION
-#
-
-#
-# Set ARCH to the architecture on which you're building (i386, mips, alpha).
-# Set SYS_INC_DIR and SYS_LIB_DIR to your system include and library dirs.
-#
-
-ARCH = mips
-SYS_INC_DIR = C:\mstools\h
-SYS_LIB_DIR = C:\mstools\lib
-
-# Set this to be the directory into which you want emacs installed
-INSTALL_DIR = C:\emacs
-
-# May need to be cl386.exe when using the SDK on an x86.
-CC = cl.exe
-
-# May need to be lib32.exe on NT 3.1, lib.exe on NT 3.5
-AR = lib32.exe
-
-MAKE = nmake.exe
-LINK = link32.exe
-
-# If you are using VC 2.0, define COMPAT_LIB (only tested on i386)
-#COMPAT_LIB = $(SYS_LIB_DIR)\oldnames.lib
-
-CVTRES = cvtres.exe
-
-#
-# END CONFIGURATION
-#
-# You shouldn't have to change any of the below to get emacs to build and
-# install on your system. If you did have to make changes, let me know.
-#
-
-INC = -I. -I$(SYS_INC_DIR) -I$(SYS_INC_DIR)\crt
-CFLAGS = -nologo $(INC) $(ARCH_CFLAGS) $(LOCAL_FLAGS) -DWIN32_LEAN_AND_MEAN -D$(ARCH)
-
-OBJDIR = obj
-$(OBJDIR):; -mkdir $(OBJDIR)
-BLD = $(OBJDIR)\$(ARCH)
-$(BLD): $(OBJDIR)
- -mkdir $(BLD)
-
-CP = copy
-CP_DIR = xcopy /fried
-
-# This is completely braindamaged, but it's the only routine known to be there
-DEL_TREE = echo y | rmdir /s
-
-!IF "$(ARCH)" == "i386"
-ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zel -W2 -H63 -G3d -Zi -Od
-ARCH_LDFLAGS = -align:0x1000
-
-!ELSE
-!IF "$(ARCH)" == "mips"
-CC = mcl.exe
-ARCH_CFLAGS = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0 -D__stdcall= -D__cdecl=
-ARCH_LDFLAGS = -align:0x1000
-
-!ELSE
-!IF "$(ARCH)" == "alpha"
-CC = claxp.exe
-ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -D__stdcall= -D__cdecl=
-ARCH_LDFLAGS = -align:0x2000
-
-!ELSE
-!ERROR Unknown architecture type.
-!ENDIF
-!ENDIF
-!ENDIF
+#
+# Makefile definition file for building GNU Emacs on Windows NT
+# Copyright (c) 1994-2001 Free Software Foundation, Inc.
+#
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+#
+# Geoff Voelker (voelker@cs.washington.edu) 9-6-94
+
+#
+# BEGIN CONFIGURATION
+#
+
+# Define the following to build the GUI version
+#
+NTGUI=1
+
+# Set INSTALL_DIR to be the directory into which you want emacs installed.
+#
+!ifndef INSTALL_DIR
+INSTALL_DIR = C:\emacs
+!endif
+
+# Define MSVCNT11 to be nonzero if you are using the MSVCNT 1.1 environment.
+# MSVCNT11 = 1
+!ifndef MSVCNT11
+MSVCNT11 = 0
+!endif
+
+#
+# END CONFIGURATION
+#
+
+#
+# Allow detection of builds with MSVC 5 or later
+#
+_NMAKE_VER_5=162
+_NMAKE_VER_4=0
+
+!IFNDEF _NMAKE_VER
+_NMAKE_VER=$(_NMAKE_VER_4)
+!ENDIF
+
+# Check that the INCLUDE and LIB environment variables are set.
+#
+!ifndef INCLUDE
+!error The INCLUDE environment variable needs to be set.
+!endif
+!ifndef LIB
+!error The LIB environment variable needs to be set.
+!endif
+
+# Determine the architecture we're running on.
+# Define ARCH for our purposes;
+# Define CPU for use by ntwin32.mak;
+# Define CONFIG_H to the appropriate config.h for the system;
+#
+!ifdef PROCESSOR_ARCHITECTURE
+# We're on Windows NT
+CPU = $(PROCESSOR_ARCHITECTURE)
+CONFIG_H = config.nt
+OS_TYPE = windowsnt
+! if "$(PROCESSOR_ARCHITECTURE)" == "x86"
+ARCH = i386
+CPU = i386
+! else
+! if "$(PROCESSOR_ARCHITECTURE)" == "MIPS"
+ARCH = mips
+! else
+! if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA"
+ARCH = alpha
+! else
+! if "$(PROCESSOR_ARCHITECTURE)" == "PPC"
+ARCH = ppc
+! else
+!error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
+! endif
+! endif
+! endif
+! endif
+!else
+# We're on Windows 95
+ARCH = i386
+CPU = i386
+CONFIG_H = config.nt
+OS_TYPE = windows95
+!endif
+
+# Include ntwin32.mak. So far, this file seems to be supported by every
+# Microsoft compiler on NT and Windows 95 and properly defines the executable
+# names and libraries necessary to build Emacs. I do not have access
+# to any other vendor compilers, so I do not know if they supply this
+# file, too. For now I'll assume that they do.
+#
+!include <ntwin32.mak>
+
+# Using cvtres is necessary on NT 3.10 and doesn't hurt on later platforms.
+CVTRES = cvtres.exe
+AR = $(implib)
+# The assignment $(CC) = $(cc) fails even though variables are case sensitive.
+LINK_TMP = $(link)
+LINK = $(LINK_TMP)
+CC_TMP = $(cc)
+CC = $(CC_TMP)
+
+# advapi32.lib is left off of $(baselibs) on NT 3.10
+!if "$(baselibs)" == "kernel32.lib "
+ADVAPI32 = advapi32.lib
+!else
+ADVAPI32 =
+!endif
+
+# Older ntwin32.mak files do not define libc; do it for them.
+!ifndef libc
+libc = libc.lib
+!endif
+
+# The base libraries for compiling Emacs on NT. With MSVC, this should
+# include oldnames.lib.
+!if $(MSVCNT11)
+BASE_LIBS = $(libc) $(baselibs) oldnames.lib
+!else
+BASE_LIBS = $(libc) $(baselibs) -nodefaultlib:oldnames.lib
+!endif
+
+# We want any debugging info in the executable.
+!if "$(LINK)" == "link32"
+SYS_LDFLAGS = -nologo
+!else
+SYS_LDFLAGS = -nologo -release -incremental:no -version:3.10
+!endif
+
+# Tag the executables to run out of the swapfile when execute off CD or network shares
+SYS_LDFLAGS = $(SYS_LDFLAGS) -swaprun:cd -swaprun:net
+
+INC = -I.
+!if "$(BUILD_TYPE)" == "spd"
+CFLAGS_COMMON = -nologo $(INC) $(ARCH_CFLAGS) $(LOCAL_FLAGS) -DWIN32_LEAN_AND_MEAN -D$(ARCH) -Fd$(BLD)\vc.pdb
+!else
+CFLAGS_COMMON = -nologo $(INC) $(ARCH_CFLAGS) $(LOCAL_FLAGS) -DWIN32_LEAN_AND_MEAN -D$(ARCH) -Fd$(BLD)\vc.pdb -DEMACSDEBUG
+!endif
+!if $(MSVCNT11)
+CFLAGS = $(CFLAGS_COMMON) -D_CRTAPI1=_cdecl
+!else
+CFLAGS = $(CFLAGS_COMMON) -D_CRTAPI1=_cdecl
+!endif
+
+!ifdef BUILD_TYPE
+OBJDIR = obj-$(BUILD_TYPE)
+!else
+OBJDIR = obj
+!endif
+$(OBJDIR):; -mkdir $(OBJDIR)
+BLD = $(OBJDIR)\$(ARCH)
+$(BLD): $(OBJDIR)
+ -mkdir $(BLD)
+
+CP = copy
+CP_DIR = xcopy /f/r/i/e/d/k
+
+!if "$(OS_TYPE)" == "windows95"
+DEL = deltree /y
+DEL_TREE = deltree /y
+!else
+DEL = del
+# NT better way of killing a deltree
+DEL_TREE = rd /s/q
+!endif
+
+# Lets us add icons to the GNU Emacs folder
+ADDPM = ..\nt\$(BLD)\addpm.exe
+
+!if "$(ARCH)" == "i386"
+!if "$(BUILD_TYPE)" == "spd"
+ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Oxsb2 -G6dF -Zi -Zp8
+!else
+ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Od -G3d -Zi -Zp8
+!endif
+ARCH_LDFLAGS = -align:0x1000 $(SYS_LDFLAGS)
+
+!else
+!if "$(ARCH)" == "mips"
+ARCH_CFLAGS = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0
+ARCH_LDFLAGS = -align:0x1000 $(SYS_LDFLAGS)
+
+!else
+!if "$(ARCH)" == "alpha"
+!if "$(BUILD_TYPE)" == "spd"
+ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -Od -D__stdcall= -D__cdecl=
+!else
+ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -O1 -D__stdcall= -D__cdecl=
+!endif
+ARCH_LDFLAGS = -align:0x2000 $(SYS_LDFLAGS)
+
+!else
+!if "$(ARCH)" == "ppc"
+# These flags are a guess...if they don't work, please send me mail.
+ARCH_CFLAGS = -D_PPC_=1 -c -Ze -Zi -W2 -Od
+ARCH_LDFLAGS = -align:0x1000 $(SYS_LDFLAGS)
+
+!else
+!ERROR Unknown architecture type "$(ARCH)".
+!endif
+!endif
+!endif
+!endif
+
+#
+# If the compiler supports compiling multiple .c files to .o files at
+# one time, use this feature.
+#
+!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
+.c{$(BLD)}.obj:
+ $(CC) $(CFLAGS) -Fo$(BLD)\ $<
+!ELSE
+.c{$(BLD)}.obj::
+ $(CC) $(CFLAGS) -Fo$(BLD)\ $<
+!ENDIF
HCoop / bpt / emacs.git / blobdiff