/* We need this for `regex.h', and perhaps for the Emacs include files. */
#include <sys/types.h>
+/* This is for other GNU distributions with internationalized messages.
+ The GNU C Library itself does not yet support such messages. */
+#if HAVE_LIBINTL_H
+# include <libintl.h>
+#else
+# define gettext(msgid) (msgid)
+#endif
+
/* The `emacs' switch turns on certain matching commands
that make sense only in Emacs. */
#ifdef emacs
#include "buffer.h"
#include "syntax.h"
-/* Emacs uses `NULL' as a predicate. */
-#undef NULL
-
#else /* not emacs */
+/* If we are not linking with Emacs proper,
+ we can't use the relocating allocator
+ even if config.h says that we can. */
+#undef REL_ALLOC
+
#ifdef STDC_HEADERS
#include <stdlib.h>
#else
char *realloc ();
#endif
-
/* We used to test for `BSTRING' here, but only GCC and Emacs define
`BSTRING', as far as I know, and neither of them use this code. */
#ifndef INHIBIT_STRING_HEADER
#define Sword 1
#endif
+#ifdef SWITCH_ENUM_BUG
+#define SWITCH_ENUM_CAST(x) ((int)(x))
+#else
+#define SWITCH_ENUM_CAST(x) (x)
+#endif
+
#ifdef SYNTAX_TABLE
extern char *re_syntax_table;
#define REGEX_ALLOCATE malloc
#define REGEX_REALLOCATE(source, osize, nsize) realloc (source, nsize)
+#define REGEX_FREE free
#else /* not REGEX_MALLOC */
bcopy (source, destination, osize), \
destination)
+/* No need to do anything to free, after alloca. */
+#define REGEX_FREE(arg) (0)
+
#endif /* not REGEX_MALLOC */
+/* Define how to allocate the failure stack. */
+
+#ifdef REL_ALLOC
+#define REGEX_ALLOCATE_STACK(size) \
+ r_alloc (&failure_stack_ptr, (size))
+#define REGEX_REALLOCATE_STACK(source, osize, nsize) \
+ r_re_alloc (&failure_stack_ptr, (nsize))
+#define REGEX_FREE_STACK(ptr) \
+ r_alloc_free (&failure_stack_ptr)
+
+#else /* not REL_ALLOC */
+
+#ifdef REGEX_MALLOC
+
+#define REGEX_ALLOCATE_STACK malloc
+#define REGEX_REALLOCATE_STACK(source, osize, nsize) realloc (source, nsize)
+#define REGEX_FREE_STACK free
+
+#else /* not REGEX_MALLOC */
+
+#define REGEX_ALLOCATE_STACK alloca
+
+#define REGEX_REALLOCATE_STACK(source, osize, nsize) \
+ REGEX_REALLOCATE (source, osize, nsize)
+/* No need to explicitly free anything. */
+#define REGEX_FREE_STACK(arg)
+
+#endif /* not REGEX_MALLOC */
+#endif /* not REL_ALLOC */
+
/* True if `size1' is non-NULL and PTR is pointing anywhere inside
`string1' or just past its end. This works if PTR is NULL, which is
if (debug) print_double_string (w, s1, sz1, s2, sz2)
-extern void printchar ();
-
/* Print the fastmap in human-readable form. */
void
if (fastmap[i++])
{
was_a_range = 0;
- printchar (i - 1);
+ putchar (i - 1);
while (i < (1 << BYTEWIDTH) && fastmap[i])
{
was_a_range = 1;
if (was_a_range)
{
printf ("-");
- printchar (i - 1);
+ putchar (i - 1);
}
}
}
do
{
putchar ('/');
- printchar (*p++);
+ putchar (*p++);
}
while (--mcnt);
break;
/* Have we broken a range? */
else if (last + 1 != c && in_range)
{
- printchar (last);
+ putchar (last);
in_range = 0;
}
if (! in_range)
- printchar (c);
+ putchar (c);
last = c;
}
if (in_range)
- printchar (last);
+ putchar (last);
putchar (']');
if (FIRST_STRING_P (where))
{
for (this_char = where - string1; this_char < size1; this_char++)
- printchar (string1[this_char]);
+ putchar (string1[this_char]);
where = string2;
}
for (this_char = where - string2; this_char < size2; this_char++)
- printchar (string2[this_char]);
+ putchar (string2[this_char]);
}
}
}
\f
/* This table gives an error message for each of the error codes listed
- in regex.h. Obviously the order here has to be same as there. */
+ in regex.h. Obviously the order here has to be same as there.
+ POSIX doesn't require that we do anything for REG_NOERROR,
+ but why not be nice? */
-static const char *re_error_msg[] =
- { NULL, /* REG_NOERROR */
+static const char *re_error_msgid[] =
+ { "Success", /* REG_NOERROR */
"No match", /* REG_NOMATCH */
"Invalid regular expression", /* REG_BADPAT */
"Invalid collation character", /* REG_ECOLLATE */
/* Normally, this is fine. */
#define MATCH_MAY_ALLOCATE
+/* When using GNU C, we are not REALLY using the C alloca, no matter
+ what config.h may say. So don't take precautions for it. */
+#ifdef __GNUC__
+#undef C_ALLOCA
+#endif
+
/* The match routines may not allocate if (1) they would do it with malloc
- and (2) it's not safe for them to use malloc. */
-#if (defined (C_ALLOCA) || defined (REGEX_MALLOC)) && (defined (emacs) || defined (REL_ALLOC))
+ and (2) it's not safe for them to use malloc.
+ Note that if REL_ALLOC is defined, matching would not use malloc for the
+ failure stack, but we would still use it for the register vectors;
+ so REL_ALLOC should not affect this. */
+#if (defined (C_ALLOCA) || defined (REGEX_MALLOC)) && defined (emacs)
#undef MATCH_MAY_ALLOCATE
#endif
\f
/* Failure stack declarations and macros; both re_compile_fastmap and
re_match_2 use a failure stack. These have to be macros because of
- REGEX_ALLOCATE. */
+ REGEX_ALLOCATE_STACK. */
/* Number of failure points for which to initially allocate space
exactly that if always used MAX_FAILURE_SPACE each time we failed.
This is a variable only so users of regex can assign to it; we never
change it ourselves. */
+#if defined (MATCH_MAY_ALLOCATE)
+int re_max_failures = 200000;
+#else
int re_max_failures = 2000;
+#endif
+
+union fail_stack_elt
+{
+ unsigned char *pointer;
+ int integer;
+};
-typedef unsigned char *fail_stack_elt_t;
+typedef union fail_stack_elt fail_stack_elt_t;
typedef struct
{
#define FAIL_STACK_EMPTY() (fail_stack.avail == 0)
#define FAIL_STACK_PTR_EMPTY() (fail_stack_ptr->avail == 0)
#define FAIL_STACK_FULL() (fail_stack.avail == fail_stack.size)
-#define FAIL_STACK_TOP() (fail_stack.stack[fail_stack.avail])
-/* Initialize `fail_stack'. Do `return -2' if the alloc fails. */
+/* Define macros to initialize and free the failure stack.
+ Do `return -2' if the alloc fails. */
#ifdef MATCH_MAY_ALLOCATE
#define INIT_FAIL_STACK() \
do { \
fail_stack.stack = (fail_stack_elt_t *) \
- REGEX_ALLOCATE (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t)); \
+ REGEX_ALLOCATE_STACK (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t)); \
\
if (fail_stack.stack == NULL) \
return -2; \
fail_stack.size = INIT_FAILURE_ALLOC; \
fail_stack.avail = 0; \
} while (0)
+
+#define RESET_FAIL_STACK() REGEX_FREE_STACK (fail_stack.stack)
#else
#define INIT_FAIL_STACK() \
do { \
fail_stack.avail = 0; \
} while (0)
+
+#define RESET_FAIL_STACK()
#endif
Return 1 if succeeds, and 0 if either ran out of memory
allocating space for it or it was already too large.
- REGEX_REALLOCATE requires `destination' be declared. */
+ REGEX_REALLOCATE_STACK requires `destination' be declared. */
#define DOUBLE_FAIL_STACK(fail_stack) \
((fail_stack).size > re_max_failures * MAX_FAILURE_ITEMS \
? 0 \
: ((fail_stack).stack = (fail_stack_elt_t *) \
- REGEX_REALLOCATE ((fail_stack).stack, \
+ REGEX_REALLOCATE_STACK ((fail_stack).stack, \
(fail_stack).size * sizeof (fail_stack_elt_t), \
((fail_stack).size << 1) * sizeof (fail_stack_elt_t)), \
\
1)))
-/* Push PATTERN_OP on FAIL_STACK.
-
+/* Push pointer POINTER on FAIL_STACK.
Return 1 if was able to do so and 0 if ran out of memory allocating
space to do so. */
-#define PUSH_PATTERN_OP(pattern_op, fail_stack) \
+#define PUSH_PATTERN_OP(POINTER, FAIL_STACK) \
((FAIL_STACK_FULL () \
- && !DOUBLE_FAIL_STACK (fail_stack)) \
- ? 0 \
- : ((fail_stack).stack[(fail_stack).avail++] = pattern_op, \
- 1))
+ && !DOUBLE_FAIL_STACK (FAIL_STACK)) \
+ ? 0 \
+ : ((FAIL_STACK).stack[(FAIL_STACK).avail++].pointer = POINTER, \
+ 1))
+
+/* Push a pointer value onto the failure stack.
+ Assumes the variable `fail_stack'. Probably should only
+ be called from within `PUSH_FAILURE_POINT'. */
+#define PUSH_FAILURE_POINTER(item) \
+ fail_stack.stack[fail_stack.avail++].pointer = (unsigned char *) (item)
-/* This pushes an item onto the failure stack. Must be a four-byte
- value. Assumes the variable `fail_stack'. Probably should only
+/* This pushes an integer-valued item onto the failure stack.
+ Assumes the variable `fail_stack'. Probably should only
be called from within `PUSH_FAILURE_POINT'. */
-#define PUSH_FAILURE_ITEM(item) \
- fail_stack.stack[fail_stack.avail++] = (fail_stack_elt_t) item
+#define PUSH_FAILURE_INT(item) \
+ fail_stack.stack[fail_stack.avail++].integer = (item)
-/* The complement operation. Assumes `fail_stack' is nonempty. */
-#define POP_FAILURE_ITEM() fail_stack.stack[--fail_stack.avail]
+/* Push a fail_stack_elt_t value onto the failure stack.
+ Assumes the variable `fail_stack'. Probably should only
+ be called from within `PUSH_FAILURE_POINT'. */
+#define PUSH_FAILURE_ELT(item) \
+ fail_stack.stack[fail_stack.avail++] = (item)
+
+/* These three POP... operations complement the three PUSH... operations.
+ All assume that `fail_stack' is nonempty. */
+#define POP_FAILURE_POINTER() fail_stack.stack[--fail_stack.avail].pointer
+#define POP_FAILURE_INT() fail_stack.stack[--fail_stack.avail].integer
+#define POP_FAILURE_ELT() fail_stack.stack[--fail_stack.avail]
/* Used to omit pushing failure point id's when we're not debugging. */
#ifdef DEBUG
-#define DEBUG_PUSH PUSH_FAILURE_ITEM
-#define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_ITEM ()
+#define DEBUG_PUSH PUSH_FAILURE_INT
+#define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_INT ()
#else
#define DEBUG_PUSH(item)
#define DEBUG_POP(item_addr)
/* Ensure we have enough space allocated for what we will push. */ \
while (REMAINING_AVAIL_SLOTS < NUM_FAILURE_ITEMS) \
{ \
- if (!DOUBLE_FAIL_STACK (fail_stack)) \
+ if (!DOUBLE_FAIL_STACK (fail_stack)) \
return failure_code; \
\
DEBUG_PRINT2 ("\n Doubled stack; size now: %d\n", \
DEBUG_STATEMENT (num_regs_pushed++); \
\
DEBUG_PRINT2 (" start: 0x%x\n", regstart[this_reg]); \
- PUSH_FAILURE_ITEM (regstart[this_reg]); \
+ PUSH_FAILURE_POINTER (regstart[this_reg]); \
\
DEBUG_PRINT2 (" end: 0x%x\n", regend[this_reg]); \
- PUSH_FAILURE_ITEM (regend[this_reg]); \
+ PUSH_FAILURE_POINTER (regend[this_reg]); \
\
DEBUG_PRINT2 (" info: 0x%x\n ", reg_info[this_reg]); \
DEBUG_PRINT2 (" match_null=%d", \
DEBUG_PRINT2 (" ever_matched=%d", \
EVER_MATCHED_SOMETHING (reg_info[this_reg])); \
DEBUG_PRINT1 ("\n"); \
- PUSH_FAILURE_ITEM (reg_info[this_reg].word); \
+ PUSH_FAILURE_ELT (reg_info[this_reg].word); \
} \
\
DEBUG_PRINT2 (" Pushing low active reg: %d\n", lowest_active_reg);\
- PUSH_FAILURE_ITEM (lowest_active_reg); \
+ PUSH_FAILURE_INT (lowest_active_reg); \
\
DEBUG_PRINT2 (" Pushing high active reg: %d\n", highest_active_reg);\
- PUSH_FAILURE_ITEM (highest_active_reg); \
+ PUSH_FAILURE_INT (highest_active_reg); \
\
DEBUG_PRINT2 (" Pushing pattern 0x%x: ", pattern_place); \
DEBUG_PRINT_COMPILED_PATTERN (bufp, pattern_place, pend); \
- PUSH_FAILURE_ITEM (pattern_place); \
+ PUSH_FAILURE_POINTER (pattern_place); \
\
DEBUG_PRINT2 (" Pushing string 0x%x: `", string_place); \
DEBUG_PRINT_DOUBLE_STRING (string_place, string1, size1, string2, \
size2); \
DEBUG_PRINT1 ("'\n"); \
- PUSH_FAILURE_ITEM (string_place); \
+ PUSH_FAILURE_POINTER (string_place); \
\
DEBUG_PRINT2 (" Pushing failure id: %u\n", failure_id); \
DEBUG_PUSH (failure_id); \
/* If the saved string location is NULL, it came from an \
on_failure_keep_string_jump opcode, and we want to throw away the \
saved NULL, thus retaining our current position in the string. */ \
- string_temp = POP_FAILURE_ITEM (); \
+ string_temp = POP_FAILURE_POINTER (); \
if (string_temp != NULL) \
str = (const char *) string_temp; \
\
DEBUG_PRINT_DOUBLE_STRING (str, string1, size1, string2, size2); \
DEBUG_PRINT1 ("'\n"); \
\
- pat = (unsigned char *) POP_FAILURE_ITEM (); \
+ pat = (unsigned char *) POP_FAILURE_POINTER (); \
DEBUG_PRINT2 (" Popping pattern 0x%x: ", pat); \
DEBUG_PRINT_COMPILED_PATTERN (bufp, pat, pend); \
\
/* Restore register info. */ \
- high_reg = (unsigned) POP_FAILURE_ITEM (); \
+ high_reg = (unsigned) POP_FAILURE_INT (); \
DEBUG_PRINT2 (" Popping high active reg: %d\n", high_reg); \
\
- low_reg = (unsigned) POP_FAILURE_ITEM (); \
+ low_reg = (unsigned) POP_FAILURE_INT (); \
DEBUG_PRINT2 (" Popping low active reg: %d\n", low_reg); \
\
for (this_reg = high_reg; this_reg >= low_reg; this_reg--) \
{ \
DEBUG_PRINT2 (" Popping reg: %d\n", this_reg); \
\
- reg_info[this_reg].word = POP_FAILURE_ITEM (); \
+ reg_info[this_reg].word = POP_FAILURE_ELT (); \
DEBUG_PRINT2 (" info: 0x%x\n", reg_info[this_reg]); \
\
- regend[this_reg] = (const char *) POP_FAILURE_ITEM (); \
+ regend[this_reg] = (const char *) POP_FAILURE_POINTER (); \
DEBUG_PRINT2 (" end: 0x%x\n", regend[this_reg]); \
\
- regstart[this_reg] = (const char *) POP_FAILURE_ITEM (); \
+ regstart[this_reg] = (const char *) POP_FAILURE_POINTER (); \
DEBUG_PRINT2 (" start: 0x%x\n", regstart[this_reg]); \
} \
\
+ set_regs_matched_done = 0; \
DEBUG_STATEMENT (nfailure_points_popped++); \
} /* POP_FAILURE_POINT */
\f
/* Structure for per-register (a.k.a. per-group) information.
- This must not be longer than one word, because we push this value
- onto the failure stack. Other register information, such as the
+ Other register information, such as the
starting and ending positions (which are addresses), and the list of
inner groups (which is a bits list) are maintained in separate
variables.
the compiler will pack our bit fields into something that fits into
the type of `word', i.e., is something that fits into one item on the
failure stack. */
+
typedef union
{
fail_stack_elt_t word;
#define SET_REGS_MATCHED() \
do \
{ \
- unsigned r; \
- for (r = lowest_active_reg; r <= highest_active_reg; r++) \
- { \
- MATCHED_SOMETHING (reg_info[r]) \
- = EVER_MATCHED_SOMETHING (reg_info[r]) \
- = 1; \
- } \
+ if (!set_regs_matched_done) \
+ { \
+ unsigned r; \
+ set_regs_matched_done = 1; \
+ for (r = lowest_active_reg; r <= highest_active_reg; r++) \
+ { \
+ MATCHED_SOMETHING (reg_info[r]) \
+ = EVER_MATCHED_SOMETHING (reg_info[r]) \
+ = 1; \
+ } \
+ } \
} \
while (0)
-
/* Registers are set to a sentinel when they haven't yet matched. */
-#define REG_UNSET_VALUE ((char *) -1)
+static char reg_unset_dummy;
+#define REG_UNSET_VALUE (®_unset_dummy)
#define REG_UNSET(e) ((e) == REG_UNSET_VALUE)
-
-
-\f
-/* How do we implement a missing MATCH_MAY_ALLOCATE?
- We make the fail stack a global thing, and then grow it to
- re_max_failures when we compile. */
-#ifndef MATCH_MAY_ALLOCATE
-static fail_stack_type fail_stack;
-
-static const char ** regstart, ** regend;
-static const char ** old_regstart, ** old_regend;
-static const char **best_regstart, **best_regend;
-static register_info_type *reg_info;
-static const char **reg_dummy;
-static register_info_type *reg_info_dummy;
-#endif
-
\f
/* Subroutine declarations and macros for regex_compile. */
|| STREQ (string, "punct") || STREQ (string, "graph") \
|| STREQ (string, "cntrl") || STREQ (string, "blank"))
\f
+#ifndef MATCH_MAY_ALLOCATE
+
+/* If we cannot allocate large objects within re_match_2_internal,
+ we make the fail stack and register vectors global.
+ The fail stack, we grow to the maximum size when a regexp
+ is compiled.
+ The register vectors, we adjust in size each time we
+ compile a regexp, according to the number of registers it needs. */
+
+static fail_stack_type fail_stack;
+
+/* Size with which the following vectors are currently allocated.
+ That is so we can make them bigger as needed,
+ but never make them smaller. */
+static int regs_allocated_size;
+
+static const char ** regstart, ** regend;
+static const char ** old_regstart, ** old_regend;
+static const char **best_regstart, **best_regend;
+static register_info_type *reg_info;
+static const char **reg_dummy;
+static register_info_type *reg_info_dummy;
+
+/* Make the register vectors big enough for NUM_REGS registers,
+ but don't make them smaller. */
+
+static
+regex_grow_registers (num_regs)
+ int num_regs;
+{
+ if (num_regs > regs_allocated_size)
+ {
+ RETALLOC_IF (regstart, num_regs, const char *);
+ RETALLOC_IF (regend, num_regs, const char *);
+ RETALLOC_IF (old_regstart, num_regs, const char *);
+ RETALLOC_IF (old_regend, num_regs, const char *);
+ RETALLOC_IF (best_regstart, num_regs, const char *);
+ RETALLOC_IF (best_regend, num_regs, const char *);
+ RETALLOC_IF (reg_info, num_regs, register_info_type);
+ RETALLOC_IF (reg_dummy, num_regs, const char *);
+ RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
+
+ regs_allocated_size = num_regs;
+ }
+}
+
+#endif /* not MATCH_MAY_ALLOCATE */
+\f
/* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
Returns one of error codes defined in `regex.h', or zero for success.
unsigned debug_count;
for (debug_count = 0; debug_count < size; debug_count++)
- printchar (pattern[debug_count]);
+ putchar (pattern[debug_count]);
putchar ('\n');
}
#endif /* DEBUG */
#endif /* not emacs */
}
- /* Initialize some other variables the matcher uses. */
- RETALLOC_IF (regstart, num_regs, const char *);
- RETALLOC_IF (regend, num_regs, const char *);
- RETALLOC_IF (old_regstart, num_regs, const char *);
- RETALLOC_IF (old_regend, num_regs, const char *);
- RETALLOC_IF (best_regstart, num_regs, const char *);
- RETALLOC_IF (best_regend, num_regs, const char *);
- RETALLOC_IF (reg_info, num_regs, register_info_type);
- RETALLOC_IF (reg_dummy, num_regs, const char *);
- RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
+ regex_grow_registers (num_regs);
}
-#endif
+#endif /* not MATCH_MAY_ALLOCATE */
return REG_NOERROR;
} /* regex_compile */
unsigned char *p = pattern;
register unsigned char *pend = pattern + size;
+ /* This holds the pointer to the failure stack, when
+ it is allocated relocatably. */
+ fail_stack_elt_t *failure_stack_ptr;
+
/* Assume that each path through the pattern can be null until
proven otherwise. We set this false at the bottom of switch
statement, to which we get only if a particular path doesn't
/* Reset for next path. */
path_can_be_null = true;
- p = fail_stack.stack[--fail_stack.avail];
+ p = fail_stack.stack[--fail_stack.avail].pointer;
continue;
}
/* We should never be about to go beyond the end of the pattern. */
assert (p < pend);
-#ifdef SWITCH_ENUM_BUG
- switch ((int) ((re_opcode_t) *p++))
-#else
- switch ((re_opcode_t) *p++)
-#endif
+ switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
{
/* I guess the idea here is to simply not bother with a fastmap
that is all we do. */
case duplicate:
bufp->can_be_null = 1;
- return 0;
+ goto done;
/* Following are the cases which match a character. These end
/* Return if we have already set `can_be_null'; if we have,
then the fastmap is irrelevant. Something's wrong here. */
else if (bufp->can_be_null)
- return 0;
+ goto done;
/* Otherwise, have to check alternative paths. */
break;
/* If what's on the stack is where we are now, pop it. */
if (!FAIL_STACK_EMPTY ()
- && fail_stack.stack[fail_stack.avail - 1] == p)
+ && fail_stack.stack[fail_stack.avail - 1].pointer == p)
fail_stack.avail--;
continue;
if (p + j < pend)
{
if (!PUSH_PATTERN_OP (p + j, fail_stack))
- return -2;
+ {
+ RESET_FAIL_STACK ();
+ return -2;
+ }
}
else
bufp->can_be_null = 1;
/* Set `can_be_null' for the last path (also the first path, if the
pattern is empty). */
bufp->can_be_null |= path_can_be_null;
+
+ done:
+ RESET_FAIL_STACK ();
return 0;
} /* re_compile_fastmap */
\f
/* Free everything we malloc. */
#ifdef MATCH_MAY_ALLOCATE
-#ifdef REGEX_MALLOC
-#define FREE_VAR(var) if (var) free (var); var = NULL
+#define FREE_VAR(var) if (var) REGEX_FREE (var); var = NULL
#define FREE_VARIABLES() \
do { \
- FREE_VAR (fail_stack.stack); \
+ REGEX_FREE_STACK (fail_stack.stack); \
FREE_VAR (regstart); \
FREE_VAR (regend); \
FREE_VAR (old_regstart); \
FREE_VAR (reg_dummy); \
FREE_VAR (reg_info_dummy); \
} while (0)
-#else /* not REGEX_MALLOC */
-/* This used to do alloca (0), but now we do that in the caller. */
-#define FREE_VARIABLES() /* Nothing */
-#endif /* not REGEX_MALLOC */
#else
#define FREE_VARIABLES() /* Do nothing! */
#endif /* not MATCH_MAY_ALLOCATE */
unsigned nfailure_points_pushed = 0, nfailure_points_popped = 0;
#endif
+ /* This holds the pointer to the failure stack, when
+ it is allocated relocatably. */
+ fail_stack_elt_t *failure_stack_ptr;
+
/* We fill all the registers internally, independent of what we
return, for use in backreferences. The number here includes
an element for register zero. */
and need to test it, it's not garbage. */
const char *match_end = NULL;
+ /* This helps SET_REGS_MATCHED avoid doing redundant work. */
+ int set_regs_matched_done = 0;
+
/* Used when we pop values we don't care about. */
#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
const char **reg_dummy;
return -2;
}
}
-#if defined (REGEX_MALLOC)
else
{
/* We must initialize all our variables to NULL, so that
= best_regend = reg_dummy = NULL;
reg_info = reg_info_dummy = (register_info_type *) NULL;
}
-#endif /* REGEX_MALLOC */
#endif /* MATCH_MAY_ALLOCATE */
/* The starting position is bogus. */
}
} /* d != end_match_2 */
- succeed:
+ succeed_label:
DEBUG_PRINT1 ("Accepting match.\n");
/* If caller wants register contents data back, do it. */
regs->start = TALLOC (regs->num_regs, regoff_t);
regs->end = TALLOC (regs->num_regs, regoff_t);
if (regs->start == NULL || regs->end == NULL)
- return -2;
+ {
+ FREE_VARIABLES ();
+ return -2;
+ }
bufp->regs_allocated = REGS_REALLOCATE;
}
else if (bufp->regs_allocated == REGS_REALLOCATE)
RETALLOC (regs->start, regs->num_regs, regoff_t);
RETALLOC (regs->end, regs->num_regs, regoff_t);
if (regs->start == NULL || regs->end == NULL)
- return -2;
+ {
+ FREE_VARIABLES ();
+ return -2;
+ }
}
}
else
regs->start[mcnt] = regs->end[mcnt] = -1;
} /* regs && !bufp->no_sub */
- FREE_VARIABLES ();
DEBUG_PRINT4 ("%u failure points pushed, %u popped (%u remain).\n",
nfailure_points_pushed, nfailure_points_popped,
nfailure_points_pushed - nfailure_points_popped);
DEBUG_PRINT2 ("Returning %d from re_match_2.\n", mcnt);
+ FREE_VARIABLES ();
return mcnt;
}
/* Otherwise match next pattern command. */
-#ifdef SWITCH_ENUM_BUG
- switch ((int) ((re_opcode_t) *p++))
-#else
- switch ((re_opcode_t) *p++)
-#endif
+ switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
{
/* Ignore these. Used to ignore the n of succeed_n's which
currently have n == 0. */
case succeed:
DEBUG_PRINT1 ("EXECUTING succeed.\n");
- goto succeed;
+ goto succeed_label;
/* Match the next n pattern characters exactly. The following
byte in the pattern defines n, and the n bytes after that
IS_ACTIVE (reg_info[*p]) = 1;
MATCHED_SOMETHING (reg_info[*p]) = 0;
+
+ /* Clear this whenever we change the register activity status. */
+ set_regs_matched_done = 0;
/* This is the new highest active register. */
highest_active_reg = *p;
/* Move past the register number and inner group count. */
p += 2;
just_past_start_mem = p;
+
break;
/* This register isn't active anymore. */
IS_ACTIVE (reg_info[*p]) = 0;
-
+
+ /* Clear this whenever we change the register activity status. */
+ set_regs_matched_done = 0;
+
/* If this was the only register active, nothing is active
anymore. */
if (lowest_active_reg == highest_active_reg)
regstart[r] = old_regstart[r];
/* xx why this test? */
- if ((int) old_regend[r] >= (int) regstart[r])
+ if (old_regend[r] >= regstart[r])
regend[r] = old_regend[r];
}
}
: bcmp (d, d2, mcnt))
goto fail;
d += mcnt, d2 += mcnt;
+
+ /* Do this because we've match some characters. */
+ SET_REGS_MATCHED ();
}
}
break;
ret = regex_compile (pattern, length, re_syntax_options, bufp);
- return re_error_msg[(int) ret];
+ if (!ret)
+ return NULL;
+ return gettext (re_error_msgid[(int) ret]);
}
\f
/* Entry points compatible with 4.2 BSD regex library. We don't define
if (!s)
{
if (!re_comp_buf.buffer)
- return "No previous regular expression";
+ return gettext ("No previous regular expression");
return 0;
}
{
re_comp_buf.buffer = (unsigned char *) malloc (200);
if (re_comp_buf.buffer == NULL)
- return "Memory exhausted";
+ return gettext (re_error_msgid[(int) REG_ESPACE]);
re_comp_buf.allocated = 200;
re_comp_buf.fastmap = (char *) malloc (1 << BYTEWIDTH);
if (re_comp_buf.fastmap == NULL)
- return "Memory exhausted";
+ return gettext (re_error_msgid[(int) REG_ESPACE]);
}
/* Since `re_exec' always passes NULL for the `regs' argument, we
ret = regex_compile (s, strlen (s), re_syntax_options, &re_comp_buf);
- /* Yes, we're discarding `const' here. */
- return (char *) re_error_msg[(int) ret];
+ if (!ret)
+ return NULL;
+
+ /* Yes, we're discarding `const' here if !HAVE_LIBINTL. */
+ return (char *) gettext (re_error_msgid[(int) ret]);
}
size_t msg_size;
if (errcode < 0
- || errcode >= (sizeof (re_error_msg) / sizeof (re_error_msg[0])))
+ || errcode >= (sizeof (re_error_msgid) / sizeof (re_error_msgid[0])))
/* Only error codes returned by the rest of the code should be passed
to this routine. If we are given anything else, or if other regex
code generates an invalid error code, then the program has a bug.
Dump core so we can fix it. */
abort ();
- msg = re_error_msg[errcode];
-
- /* POSIX doesn't require that we do anything in this case, but why
- not be nice. */
- if (! msg)
- msg = "Success";
+ msg = gettext (re_error_msgid[errcode]);
msg_size = strlen (msg) + 1; /* Includes the null. */
HCoop / bpt / emacs.git / blobdiff