# make all to compile and build Emacs.
# make install to install it.
-# make install.sysv to install on system V. Note that on system V you
-# must change mandir to /usr/local/man/man1.
-# make install.xenix to install on Xenix.
-# make install.aix to install on AIX.
# make TAGS to update tags tables.
#
# make clean or make mostlyclean
# Still more severe - delete backup and autosave files, too.
SHELL = /bin/sh
-MAKE = make # BSD doesn't have it as a default.
+
+# If Make doesn't predefine MAKE, set it here.
+@SET_MAKE@
# ==================== Things `configure' Might Edit ====================
CC=@CC@
-DEFS=@DEFS@
+CPP=@CPP@
C_SWITCH_SYSTEM=@c_switch_system@
ALLOCA=@ALLOCA@
+LN_S=@LN_S@
+CFLAGS=@CFLAGS@
+C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
+LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
+YACC=@YACC@
### These help us choose version- and architecture-specific directories
### to install files in.
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
-# not need to change them.
-prefix=/usr/local
+# not need to change them. This defaults to /usr/local.
+prefix=@prefix@
# Like `prefix', but used for architecture-specific files.
-exec_prefix=${prefix}
+exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
-bindir=${exec_prefix}/bin
+bindir=@bindir@
# Where to install architecture-independent data files. ${lispdir}
# and ${etcdir} are subdirectories of this.
-datadir=${prefix}/lib
+datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
# runs. These files are all architecture-independent. Right now, the
# only such data is the locking directory; ${lockdir} is a
# subdirectory of this.
-statedir=${prefix}/lib
+statedir=@statedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data. ${archlibdir} is a subdirectory of this.
-libdir=${exec_prefix}/lib
+libdir=@libdir@
# Where to install Emacs's man pages, and what extension they should have.
-mandir=${prefix}/man/man1
+mandir=@mandir@
manext=.1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# since there are now many packages documented with the texinfo
# system, it is inappropriate to imply that it is part of Emacs.
-infodir=${prefix}/info
+infodir=@infodir@
-# Where to find the source code - setting this to anything but
-# . doesn't work yet. The source code for Emacs's C kernel is
+# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's `--srcdir' option.
srcdir=@srcdir@
+# Tell make where to find source files; this is needed for the makefiles.
+VPATH=@srcdir@
+
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-@inst_paths@# Where to install the lisp files distributed with
-@inst_paths@# Emacs. This includes the Emacs version, so that the
-@inst_paths@# lisp files for different versions of Emacs will install
-@inst_paths@# themselves in separate directories.
-@inst_paths@lispdir=${datadir}/emacs/${version}/lisp
-
-@inst_paths@# Where to install the lisp files which are distributed
-@inst_paths@# with Emacs but not maintained by the FSF. This
-@inst_paths@# includes the Emacs version, so that the lisp files for
-@inst_paths@# different versions of Emacs will install themselves in
-@inst_paths@# separate directories.
-@inst_paths@externallispdir=${datadir}/emacs/${version}/external-lisp
-
-@inst_paths@# Directories Emacs should search for lisp files specific
-@inst_paths@# to this site (i.e. customizations), before consulting
-@inst_paths@# ${lispdir}. This should be a colon-separated list of
-@inst_paths@# directories.
-@inst_paths@locallisppath=${datadir}/emacs/site-lisp
+# Where to install the lisp files distributed with
+# Emacs. This includes the Emacs version, so that the
+# lisp files for different versions of Emacs will install
+# themselves in separate directories.
+lispdir=@lispdir@
+
+# Directories Emacs should search for lisp files specific
+# to this site (i.e. customizations), before consulting
+# ${lispdir}. This should be a colon-separated list of
+# directories.
+locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
-lisppath=${locallisppath}:${lispdir}
+lisppath=@lisppath@
# Where Emacs will search for its lisp files while
# building. This is only used during the process of
# entry for the directory containing the installed lisp
# files has been replaced with ../lisp. This should be a
# colon-separated list of directories.
-buildlisppath=../lisp
-
-@inst_paths@# Where to install the other architecture-independent
-@inst_paths@# data files distributed with Emacs (like the tutorial,
-@inst_paths@# the cookie recipes and the Zippy database). This path
-@inst_paths@# usually contains the Emacs version number, so the data
-@inst_paths@# files for multiple versions of Emacs may be installed
-@inst_paths@# at once.
-@inst_paths@etcdir=${datadir}/emacs/${version}/etc
-
-@inst_paths@# Where to create and expect the locking directory, where
-@inst_paths@# the Emacs locking code keeps track of which files are
-@inst_paths@# currently being edited.
-@inst_paths@lockdir=${statedir}/emacs/lock
-
-@inst_paths@# Where to put executables to be run by Emacs rather than
-@inst_paths@# the user. This path usually includes the Emacs version
-@inst_paths@# and configuration name, so that multiple configurations
-@inst_paths@# for multiple versions of Emacs may be installed at
-@inst_paths@# once.
-@inst_paths@archlibdir=${libdir}/emacs/${version}/${configuration}
-
-# ====================== Developer's configuration =======================
-
-# The following assignments make sense if you're running Emacs on a single
-# machine, one version at a time, and you want changes to the lisp and etc
-# directories in the source tree to show up immediately in your working
-# environment. It saves a great deal of disk space by not duplicating the
-# lisp and etc directories.
-
-@rip_paths@lispdir=${srcdir}/lisp
-@rip_paths@externallispdir=${srcdir}/externallisp
-@rip_paths@locallisppath=${datadir}/emacs/site-lisp
-@rip_paths@etcdir=${srcdir}/etc
-@rip_paths@lockdir=${srcdir}/lock
-@rip_paths@archlibdir=${srcdir}/lib-src
-@rip_paths@infodir=${srcdir}/info
+buildlisppath=${srcdir}/lisp
+
+# Where to install the other architecture-independent
+# data files distributed with Emacs (like the tutorial,
+# the cookie recipes and the Zippy database). This path
+# usually contains the Emacs version number, so the data
+# files for multiple versions of Emacs may be installed
+# at once.
+etcdir=@etcdir@
+
+# Where to create and expect the locking directory, where
+# the Emacs locking code keeps track of which files are
+# currently being edited.
+lockdir=@lockdir@
+
+# Where to put executables to be run by Emacs rather than
+# the user. This path usually includes the Emacs version
+# and configuration name, so that multiple configurations
+# for multiple versions of Emacs may be installed at
+# once.
+archlibdir=@archlibdir@
+
+# Where to put the docstring file.
+docdir=@docdir@
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
-INSTALL = install
-INSTALLFLAGS = -c
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_DATA = ${INSTALL}
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
# ============================= Targets ==============================
-# Flags passed down to subdirectory makefiles.
-MFLAGS =
-
-CFLAGS=${DEFS}
+# What emacs should be called when installed.
+EMACS = emacs
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
SUBDIR = lib-src src
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile
+SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
# When installing the info files, we need to do special things to
# avoid nuking an existing dir file, so we don't do that here;
# instead, we have written out explicit code in the `install' targets.
-COPYDIR = etc ${srcdir}/lisp ${srcdir}/external-lisp
-COPYDESTS = ${etcdir} ${lispdir} ${externallispdir}
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = ${etcdir} ${lispdir}
-all: src/paths.h ${SUBDIR}
+all: paths-force ${SUBDIR}
removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/'
-# We force the rebuilding of src/paths.h because the user might give
+# Note that sed is not in /bin on 386bsd.
+src/paths.h: Makefile ${srcdir}/src/paths.h.in
+ @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+ @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
+ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
+ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
+ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
+ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
+ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
+ -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
+ @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
+
+# For `make all',
+# we force the rebuilding of src/paths.h because the user might give
# make different values for the various directories. Since we use
# move-if-change, src/paths.h only actually changes if the user did
# something notable, so the only unnecessary work we do is in building
# src/paths.h.tmp, which isn't much.
# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC
+paths-force: FRC.src.paths.h
@echo "Producing \`src/paths.h' from \`src/paths.h.in'."
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
+ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
@${srcdir}/move-if-change src/paths.h.tmp src/paths.h
-src: lib-src
+src: lib-src FRC.src src/paths.h
+
+# This ought to depend on src/paths.h, so that in parallel make
+# src/paths.h will be available for the compilations in lib-src.
+# But that causes trouble in `make install' if a different prefix
+# is specified at that time.
+lib-src: FRC.lib-src src/paths.h
.RECURSIVE: ${SUBDIR}
${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
- cd $@; $(MAKE) all ${MFLAGS} \
- CC='${CC}' DEFS='${DEFS}' \
- srcdir='${srcdir}/$@' libdir='${libdir}'
-
-## We build the makefiles for the subdirectories here so that we can
-## edit the values for the path variables into them. This means that
-## when the user has built them from this makefile once, they will use
-## the right default values for the path variables.
-lib-src/Makefile: ${srcdir}/lib-src/Makefile.in Makefile
- rm -f lib-src/Makefile.tmp
- @echo "Producing \`lib-src/Makefile' from \`${srcdir}/lib-src/Makefile.in'."
- @(echo "# This file is generated from \`${srcdir}/lib-src/Makefile.in'." ; \
- echo "# If you are thinking about editing it, you should seriously consider" ; \
- echo "# running \`make lib-src/Makefile' at the top of the" ; \
- echo "# Emacs build tree instead, or editing" ; \
- echo "# \`${srcdir}/lib-src/Makefile.in' itself." ; \
- /bin/sed < ${srcdir}/lib-src/Makefile.in \
- -e 's|^\(version *=\).*$$|\1'"${version}"'|' \
- -e 's|^\(configname *=\).*$$|\1'"${configuration}"'|' \
- -e 's|^\(prefix *=\).*$$|\1'"${prefix}"'|' \
- -e 's|^\(exec_prefix *=\).*$$|\1'"${exec_prefix}"'|' \
- -e 's|^\(libdir *=\).*$$|\1'"${libdir}"'|' \
- -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'|' \
- -e 's|^\(archlibdir *=\).*$$|\1'"${archlibdir}"'|' \
- -e 's|^\(ALLOCA *=\).*$$|\1'"${ALLOCA}"'|' \
- -e 's|^CC *=.*$$|CC='"${CC}"'|' \
- -e 's|^DEFS *=.*$$|DEFS='"${DEFS}"'|' \
- -e 's|^C_SWITCH_SYSTEM *=.*$$|C_SWITCH_SYSTEM='"${C_SWITCH_SYSTEM}"'|' \
- -e 's|^LOADLIBES *=.*$$|LOADLIBES='"${libsrc_libs}"'|' \
- -e '/^# DIST: /d') > lib-src/Makefile.tmp
- @${srcdir}/move-if-change lib-src/Makefile.tmp lib-src/Makefile
- chmod -w lib-src/Makefile
-
-src/Makefile: ${srcdir}/src/Makefile.in Makefile
- rm -f src/Makefile.tmp
- @echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'."
- @(echo "# This file is generated from \`${srcdir}/src/Makefile.in'." ; \
- echo "# If you are thinking about editing it, you should seriously consider" ; \
- echo "# running \`make src/Makefile' at the top of the" ; \
- echo "# Emacs build tree instead, or editing" ; \
- echo "# \`${srcdir}/src/Makefile.in' itself." ; \
- /bin/sed < ${srcdir}/src/Makefile.in \
- -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'|' \
- -e 's|^CC *=.*$$|CC='"${CC}"'|' \
- -e 's|^DEFS *=.*$$|DEFS='"${DEFS}"'|' \
- -e '/^# DIST: /d') > src/Makefile.tmp
- @${srcdir}/move-if-change src/Makefile.tmp src/Makefile
- chmod -w src/Makefile
-
-oldXMenu/Makefile: ${srcdir}/oldXMenu/Makefile Makefile
- echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'."
- rm -f src/Makefile.tmp
- cp "${srcdir}"/oldXMenu/Makefile oldXMenu/Makefile
-
-
-Makefile:
+ cd $@; $(MAKE) all $(MFLAGS) \
+ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
+ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
+
+blessmail: ${SUBDIR_MAKEFILES} src FRC
+ cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) MAKE='${MAKE}'
+
+Makefile: Makefile.in config.status
+ ./config.status
+
+src/Makefile: src/Makefile.in.in config.status
+ ./config.status
+
+lib-src/Makefile: lib-src/Makefile.in config.status
+ ./config.status
+
+oldXMenu/Makefile: oldXMenu/Makefile.in config.status
+ ./config.status
+
+lwlib/Makefile: lwlib/Makefile.in config.status
./config.status
# ==================== Installation ====================
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
+## On AIX, use tar xBf.
+## On Xenix, use tar xpf.
+
+.PHONY: install mkdir
+
## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
-install: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ] \
- && (echo "Copying $${dir}..." ; \
- rm -rf $${dest} ; mkdir $${dest} ; \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xf - ); \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -rf $${subdir}/CVS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done) ; \
- done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 ./dir ${infodir}/dir ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 $$f ${infodir}/$$f ; \
- done ; \
- fi)
- for page in emacs etags ctags ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 etc/$${page}.1 \
- ${mandir}/$${page}${manext} ; \
- done
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -m 1755 src/emacs \
- ${bindir}/emacs-${version}
- -rm -f ${bindir}/emacs
- ln ${bindir}/emacs-${version} ${bindir}/emacs
-
-## If we let lib-src do its own installation, that means we
-## don't have to duplicate the list of utilities to install in
-## this Makefile as well.
-install.sysv: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
+## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
+## ever modify src/paths.h.
+install: ${SUBDIR} install-arch-dep install-arch-indep blessmail;
+
+### Note that we copy the DOC-* files from the build etc directory
+### as well as lots of things from ${srcdir}/etc.
+install-arch-dep: mkdir
+ (cd lib-src; \
+ $(MAKE) install $(MFLAGS) prefix=${prefix} \
+ exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
+ archlibdir=${archlibdir})
+ ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
+ -chmod 1755 ${bindir}/emacs-${version}
+ rm -f ${bindir}/$(EMACS)
+ -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
+
+### Note that we copy the DOC-* files from the build etc directory
+### as well as lots of things from ${srcdir}/etc.
+install-arch-indep: mkdir
-set ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ] \
- && (rm -rf $${dest} ; mkdir $${dest} ; \
- (cd $${dir}; find . -print | cpio -pdum $${dest} ) ; \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -rf $${subdir}/CVS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done) ; \
- done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- cpset ./dir ${infodir} 444 bin bin ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- cpset $$f ${infodir} 444 bin bin ; \
- done ; \
- fi)
- -for page in emacs etags ctags ; do \
- cpset etc/$${page}.1 ${mandir}/$${page}${manext} 444 bin bin ; \
- done
- -/bin/rm -f ${bindir}/emacs
- -cpset src/emacs ${bindir}/emacs-${version} 1755 bin bin
- -ln ${bindir}/emacs-${version} ${bindir}/emacs
-
-## If we let lib-src do its own installation, that means we
-## don't have to duplicate the list of utilities to install in
-## this Makefile as well.
-install.xenix: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
- -set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ] \
- && (rm -rf $${dest} ; mkdir $${dest} ; \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xpf - );\
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -rf $${subdir}/CVS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done) ; \
+ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
+ rm -rf $$1 ; \
+ fi ; \
+ shift ; \
done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- cp ./dir ${infodir} ; \
- chmod 444 ${infodir}/dir ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- cp $$f ${infodir} ; \
- chmod 444 ${infodir}/$$f ; \
- done ; \
- fi)
- for page in emacs etags ctags ; do \
- cp etc/$${page}.1 ${mandir}/$${page}${manext} ; \
- chmod 444 ${mandir}/$${page}${manext} ; \
- done
- -mv -f ${bindir}/emacs ${bindir}/emacs.old
- cp src/emacs ${bindir}/emacs-${version}
- ln ${bindir}/emacs-${version} ${bindir}/emacs
- chmod 1755 ${bindir}/emacs
- -rm -f ${bindir}/emacs.old
-
-## If we let lib-src do its own installation, that means we
-## don't have to duplicate the list of utilities to install in
-## this Makefile as well.
-install.aix: all mkdir
- (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir})
-set ${COPYDESTS} ; \
+ mkdir ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
dest=$$1 ; shift ; \
[ -d $${dir} ] \
- && [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ] \
- && (rm -rf $${dest} ; mkdir $${dest} ; \
- (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xBf - );\
+ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
+ && (echo "Copying $${dir}..." ; \
+ (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
rm -rf $${subdir}/RCS ; \
rm -rf $${subdir}/CVS ; \
rm -f $${subdir}/*~ ; \
done) ; \
done
- -(cd info ; \
- if [ ! -f ${infodir}/dir ]; then \
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${infodir} ./dir ; \
- fi ; \
- if [ "`echo *.info*`" != "*.info*" ]; then \
- for f in *.info* ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${infodir} $$f ; \
- done ; \
- fi)
- ${INSTALL_PROGRAM} ${INSTALLFLAGS} -M 1755 -f ${bindir} src/emacs
- mv ${bindir}/emacs ${bindir}/emacs-${version}
- for page in emacs etags ctags ; do \
- ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${mandir} etc/$${page}.1 ;\
+ if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
+ then \
+ echo "Copying etc/DOC* ..." ; \
+ (cd etc; tar -cf - DOC*)|(cd ${docdir}; umask 0; tar -xvf - ); \
+ else true; fi
+ thisdir=`/bin/pwd`; \
+ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
+ then \
+ (cd ${srcdir}/info ; \
+ if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
+ (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
+ fi ; \
+ for f in cl* dired-x* emacs* forms* gnus* info* sc* vip* ; do \
+ (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
+ done); \
+ else true; fi
+ thisdir=`/bin/pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \
+ (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \
done
- -rm -f ${bindir}/emacs
- ln ${bindir}/emacs-${version} ${bindir}/emacs
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
### instead of mkdir. Not all systems' mkdirs have the `-p' flag.
-mkdir: FRC
- ./lib-src/make-path ${COPYDESTS} ${lockdir}
- chmod 777 ${COPYDESTS} ${lockdir}
+mkdir: FRC.mkdir
+ ./lib-src/make-path ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
+ ${bindir} ${datadir} ${docdir} ${libdir} \
+ `echo ${locallisppath} | sed 's/:/ /'`
+ -chmod 777 ${lockdir}
+
+### Delete all the installed files that the `install' target would
+### create (but not the noninstalled files such as `make all' would
+### create).
+###
+### Don't delete the lisp and etc directories if they're in the source tree.
+uninstall:
+ (cd lib-src; \
+ $(MAKE) $(MFLAGS) uninstall \
+ prefix=${prefix} exec_prefix=${exec_prefix} \
+ bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
+ for dir in ${lispdir} ${etcdir} ; do \
+ if [ -d $${dir} ]; then \
+ case `(cd $${dir} ; /bin/pwd)` in \
+ `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
+ * ) rm -rf $${dir} ;; \
+ esac ; \
+ case $${dir} in \
+ ${datadir}/emacs/${version}/* ) \
+ rm -rf ${datadir}/emacs/${version} \
+ ;; \
+ esac ; \
+ fi ; \
+ done
+ (cd ${infodir}; rm -f cl* emacs* forms* info* vip*)
+ (cd ${mandir}; rm -f emacs.1 etags.1 ctags.1)
+ (cd ${bindir}; rm -f emacs-${version} emacs)
-FRC:
+### Some makes seem to remember that they've built something called FRC,
+### so you can only use a given FRC once per makefile.
+FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.mkdir:
+FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean:
# ==================== Cleaning up and miscellanea ====================
-### `clean'
-### Delete all files from the current directory that are normally
-### created by building the program. Don't delete the files that
-### record the configuration. Also preserve files that could be made
-### by building, but normally aren't because the distribution comes
-### with them.
+.PHONY: mostlyclean clean distclean realclean extraclean
+
### `mostlyclean'
-### Like `clean', but may refrain from deleting a few files that
-### people normally don't want to recompile. For example, the
-### `mostlyclean' target for GCC does not delete `libgcc.a', because
-### recompiling it is rarely necessary and takes a lot of time.
+### Like `clean', but may refrain from deleting a few files that people
+### normally don't want to recompile. For example, the `mostlyclean'
+### target for GCC does not delete `libgcc.a', because recompiling it
+### is rarely necessary and takes a lot of time.
+mostlyclean: FRC.mostlyclean
+ (cd src; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
+ -(cd man && $(MAKE) $(MFLAGS) mostlyclean)
+
+### `clean'
+### Delete all files from the current directory that are normally
+### created by building the program. Don't delete the files that
+### record the configuration. Also preserve files that could be made
+### by building, but normally aren't because the distribution comes
+### with them.
###
-clean mostlyclean:
- cd src; $(MAKE) clean
- cd lib-src; $(MAKE) clean
- cd oldXMenu; $(MAKE) clean
- if [ `(cd ${etcdir} ; /bin/pwd)` != `(cd etc; /bin/pwd)` ] ; then \
- cd etc; $(MAKE) clean; \
- else true; \
- fi
+### Delete `.dvi' files here if they are not part of the distribution.
+clean: FRC.clean
+ (cd src; $(MAKE) $(MFLAGS) clean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
+ (cd lwlib; $(MAKE) $(MFLAGS) clean)
+ (cd lib-src; $(MAKE) $(MFLAGS) clean)
+ -(cd man && $(MAKE) $(MFLAGS) clean)
### `distclean'
-### Delete all files from the current directory that are created by
-### configuring or building the program. This should leave only the
-### files that would be in the distribution.
-distclean:
- for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} distclean); done
- -(cd lock; rm *)
- -rm config.status config-tmp-*
+### Delete all files from the current directory that are created by
+### configuring or building the program. If you have unpacked the
+### source and built the program without creating any other files,
+### `make distclean' should leave only the files that were in the
+### distribution.
+top_distclean=\
+ rm -f config.status build-install ; \
+ rm -f Makefile ${SUBDIR_MAKEFILES} ; \
+ (cd lock ; rm -f *)
+distclean: FRC.distclean
+ (cd src; $(MAKE) $(MFLAGS) distclean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) distclean)
+ (cd lib-src; $(MAKE) $(MFLAGS) distclean)
+ (cd man && $(MAKE) $(MFLAGS) distclean)
+ ${top_distclean}
+
### `realclean'
-### Delete everything from the current directory that can be
-### reconstructed with this makefile. This typically includes
-### everything deleted by distclean, plus more: C source files
-### produced by Bison, tags tables, info files, and so on.
-realclean:
- for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} realclean); done
- (cd lock; rm *)
- rm config.status
+### Delete everything from the current directory that can be
+### reconstructed with this Makefile. This typically includes
+### everything deleted by distclean, plus more: C source files
+### produced by Bison, tags tables, info files, and so on.
+###
+### One exception, however: `make realclean' should not delete
+### `configure' even if `configure' can be remade using a rule in the
+### Makefile. More generally, `make realclean' should not delete
+### anything that needs to exist in order to run `configure' and then
+### begin to build the program.
+realclean: FRC.realclean
+ (cd src; $(MAKE) $(MFLAGS) realclean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) realclean)
+ (cd lwlib; $(MAKE) $(MFLAGS) realclean)
+ (cd lib-src; $(MAKE) $(MFLAGS) realclean)
+ -(cd man && $(MAKE) $(MFLAGS) realclean)
+ ${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
### says GCC supports it, and that's where the configuration part of
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
- for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} extraclean); done
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
-(cd lock; rm *)
-rm config.status config-tmp-*
-rm -f *~ \#*
SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
README build-install.in configure make-dist move-if-change
+.PHONY: unlock relock
+
unlock:
chmod u+w $(SOURCES) cpp/*
-(cd elisp; chmod u+w Makefile README *.texi)
- (cd etc; make unlock)
- (cd lib-src; make unlock)
- (cd lisp; make unlock)
+ (cd etc; $(MAKE) $(MFLAGS) unlock)
+ (cd lib-src; $(MAKE) $(MFLAGS) unlock)
+ (cd lisp; $(MAKE) $(MFLAGS) unlock)
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
- (cd src; make unlock)
+ (cd lwlib; chmod u+w *.[ch] Makefile README)
+ (cd src; $(MAKE) $(MFLAGS) unlock)
relock:
chmod u-w $(SOURCES) cpp/*
-(cd elisp; chmod u-w Makefile README *.texi)
- (cd etc; make relock)
- (cd lib-src; make relock)
- (cd lisp; make relock)
+ (cd etc; $(MAKE) $(MFLAGS) relock)
+ (cd lib-src; $(MAKE) $(MFLAGS) relock)
+ (cd lisp; $(MAKE) $(MFLAGS) relock)
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
- (cd src; make relock)
+ (cd lwlib; chmod u+w *.[ch] Makefile README)
+ (cd src; $(MAKE) $(MFLAGS) relock)
TAGS tags: lib-src
- (cd ${srcdir} ; lib-src/etags --output=./src/TAGS \
- src/*.[ch] lisp/*.el lisp/term/*.el)
+ cd ${srcdir}/src; $(MAKE) tags
check:
@echo "We don't have any tests for GNU Emacs yet."
dist:
cd ${srcdir}; make-dist
+
+.PHONY: info dvi dist check
+force-info:
+info: force-info
+ (cd ${srcdir}/man; $(MAKE) $(MFLAGS) info)
+dvi:
+ (cd ${srcdir}/man; $(MAKE) $(MFLAGS) dvi)
HCoop / bpt / emacs.git / blobdiff