### @configure_input@
-# Copyright (C) 1992-2013 Free Software Foundation, Inc.
+# Copyright (C) 1992-2014 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
#
# make extraclean
# Still more severe - delete backup and autosave files, too.
+# Also generated files that do not normally change and can be slow
+# to rebuild (eg leim/ja-dic).
#
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
SHELL = @SHELL@
-# This may not work with certain non-GNU make's. It only matters when
-# inheriting a CDPATH not starting with the current directory.
+# This only matters when inheriting a CDPATH not starting with the
+# current directory.
CDPATH=
# If Make doesn't predefine MAKE, set it here.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}"
-all: ${SUBDIR}
+all: ${SUBDIR} info
-.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
+.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32
removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
-epaths-force: FRC
+epaths-force:
@(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
# MS-Windows format (e.g. 'c:/foo/bar'), because temacs is a MinGW
# program that doesn't support MSYS-style paths (e.g. '/c/foo/bar' or
# '/foo/bar').
-epaths-force-w32: FRC
+epaths-force-w32:
@(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${srcdir}"`; \
w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}" N`; \
- w32prefixpattern=`echo "${w32prefix}" | ${msys_sed_sh_escape}` ; \
+ w32prefixpattern=`echo "$${w32prefix}" | ${msys_sed_sh_escape}` ; \
w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}" N ":" "\\;" | ${msys_w32prefix_subst}` ; \
sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
-e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath}"'";' \
lisp: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp nt: Makefile FRC
+lib lib-src lisp nt: Makefile
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
# file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
# all preloaded elisp files, and only then dump the actual src/emacs, which
# is not wrong, but is overkill in 99.99% of the cases.
-src: Makefile FRC
+#
+# Note the use of single quotes in the value of vcswitness.
+# This passes an unexpanded $srcdir to src's Makefile, which then
+# expands it using its own value of srcdir (which points to the
+# source directory of src/).
+src: Makefile
dirstate='.bzr/checkout/dirstate'; \
vcswitness='$$(srcdir)/../'$$dirstate; \
[ -r "$(srcdir)/$$dirstate" ] || vcswitness=''; \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot" \
VCSWITNESS="$$vcswitness"
-blessmail: Makefile src FRC
+blessmail: Makefile src
cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
MAKE='${MAKE}' archlibdir='$(archlibdir)'
$(MAKE) install $(MFLAGS) prefix="${prefix}" \
exec_prefix="${exec_prefix}" bindir="${bindir}" \
libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
+ datadir="${datadir}" \
INSTALL_STRIP=${INSTALL_STRIP}
## In the share directory, we are deleting:
${write_subdir}
subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
${write_subdir} || true
- [ -z "${GZIP_PROG}" ] || \
- ( echo "Compressing *.el ..." ; \
- unset CDPATH; \
- thisdir=`/bin/pwd`; \
- for dir in "$(DESTDIR)${lispdir}"; do \
- cd "$${thisdir}" ; \
- cd "$${dir}" || exit 1 ; \
- for f in `find . -name "*.elc" -print`; do \
- f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \
- ${GZIP_PROG} -9n "$$f_el" ; \
- done ; \
- done )
+ [ -z "${GZIP_PROG}" ] || { \
+ echo "Compressing *.el ..." && \
+ cd "$(DESTDIR)${lispdir}" && \
+ find . -name '*.elc' -exec $(SHELL) -c \
+ '${GZIP_PROG} -9n `expr "$$1" : "\\(.*\\)c"`' dummy '{}' ';'; \
+ }
-chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
## The above chmods are needed because "umask 022; tar ..." is not
chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
else true; fi
+## FIXME:
+## If info/dir is missing, but we have install-info, we should let
+## that handle it. If info/dir is present and we do not have install-info,
+## we should check for missing entries and add them by hand.
+##
+## FIXME:
+## If HAVE_MAKEINFO = no and there are no info files, do not install info/dir.
install-info: info
umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
-unset CDPATH; \
if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
true; \
else \
- (cd "$(DESTDIR)${infodir}"; \
- [ -f dir ] || \
- (cd "$${thisdir}"; \
- ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \
+ [ -f "$(DESTDIR)${infodir}/dir" ] || \
+ [ ! -f ${srcdir}/info/dir ] || \
+ ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir"; \
info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
bindir="${bindir}" libexecdir="${libexecdir}" \
archlibdir="${archlibdir}"
-FRC:
-
# ==================== Cleaning up and miscellanea ====================
.PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
### normally don't want to recompile. For example, the `mostlyclean'
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
-mostlyclean: FRC
+mostlyclean:
cd src && $(MAKE) $(MFLAGS) mostlyclean
cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
cd lwlib && $(MAKE) $(MFLAGS) mostlyclean
### with them.
###
### Delete `.dvi' files here if they are not part of the distribution.
-clean: FRC
+clean:
-rm -f etc/emacs.tmpdesktop
cd src && $(MAKE) $(MFLAGS) clean
cd oldXMenu && $(MAKE) $(MFLAGS) clean
top_distclean=\
${top_bootclean}; \
rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
-distclean: FRC
+distclean:
cd src && $(MAKE) $(MFLAGS) distclean
cd oldXMenu && $(MAKE) $(MFLAGS) distclean
cd lwlib && $(MAKE) $(MFLAGS) distclean
cd leim && $(MAKE) $(MFLAGS) distclean
cd lisp && $(MAKE) $(MFLAGS) distclean
cd nextstep && $(MAKE) $(MFLAGS) distclean
- for dir in test/automated admin/unidata; do \
+ for dir in test/automated admin/grammars admin/unidata; do \
[ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \
done
${top_distclean}
### `bootstrap-clean'
### Delete everything that can be reconstructed by `make' and that
### needs to be deleted in order to force a bootstrap from a clean state.
-bootstrap-clean: FRC
+bootstrap-clean:
cd src && $(MAKE) $(MFLAGS) bootstrap-clean
cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
cd lwlib && $(MAKE) $(MFLAGS) maintainer-clean
cd leim && $(MAKE) $(MFLAGS) bootstrap-clean
cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
- for dir in test/automated admin/unidata; do \
+ for dir in test/automated admin/grammars admin/unidata; do \
[ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \
done
[ ! -f config.log ] || mv -f config.log config.log~
+ rm -rf ${srcdir}/info
${top_bootclean}
### `maintainer-clean'
top_maintainer_clean=\
${top_distclean}; \
rm -fr autom4te.cache
-maintainer-clean: bootstrap-clean FRC
+maintainer-clean: bootstrap-clean
cd src && $(MAKE) $(MFLAGS) maintainer-clean
cd leim && $(MAKE) $(MFLAGS) maintainer-clean
cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
- for dir in test/automated admin/unidata; do \
+ for dir in test/automated admin/grammars admin/unidata; do \
[ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \
done
${top_maintainer_clean}
t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
.PHONY: $(DOCS) docs pdf ps
-.PHONY: info dvi dist check html info-real force-info check-info-dir
+.PHONY: info dvi dist check html info-real info-dir check-info
## TODO add etc/refcards.
docs: $(DOCS)
pdf: $(PDFS)
ps: $(PSS)
+info-dir: ${srcdir}/info/dir
+
+## Not strictly necessary, but speeds things up a bit by stopping
+## the info-dir rule from running when not needed.
+## Hopefully doc/misc/*.texi is not too long for some systems?
+info_dir_deps = ${srcdir}/build-aux/dir_top \
+ ${srcdir}/doc/emacs/emacs.texi \
+ ${srcdir}/doc/lispintro/emacs-lisp-intro.texi \
+ ${srcdir}/doc/lispref/elisp.texi ${srcdir}/doc/misc/*.texi
+
+## It would be much simpler if info/dir was only created in the
+## installation location by the install-info rule, but we also
+## need one in the source directory for people running uninstalled.
+## FIXME it would be faster to use the install-info program if we have it,
+## but then we would need to depend on info-real, which would
+## slow down parallelization.
+${srcdir}/info/dir: ${info_dir_deps}
+ tempfile=info-dir.$$$$; \
+ rm -f $${tempfile}; \
+ thisdir=`pwd`; \
+ (cd ${srcdir} && ./build-aux/make-info-dir $${thisdir}/$${tempfile}); \
+ ${srcdir}/build-aux/move-if-change $${tempfile} ${srcdir}/info/dir
INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
install-lispintro-dvi install-misc-dvi
uninstall-ps: $(UNINSTALL_PS)
-force-info:
# Note that man/Makefile knows how to put the info files in $(srcdir),
# so we can do ok running make in the build dir.
# This used to have a clause that exited with an error if MAKEINFO = no.
# would require changing every rule in doc/ that builds an info file,
# and it's not worth it. This case is only relevant if you download a
# release, then change the .texi files.
-info: force-info
+info:
@if test "$(HAVE_MAKEINFO)" = "no"; then \
echo "Configured --without-makeinfo, not building manuals" ; \
else \
- $(MAKE) $(MFLAGS) info-real ; \
+ $(MAKE) $(MFLAGS) info-real info-dir; \
fi
-# The info/dir file must be updated by hand when new manuals are added.
-# Cannot add an info/dir entry for efaq-w32 since it is not installed
-# on all platforms.
-check-info-dir: info
+## build-aux/make-info-dir expects only certain dircategories.
+check-info: info
cd info ; \
- missing= ; \
+ bad= ; \
for file in *; do \
test -f "$${file}" || continue ; \
case $${file} in \
- *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
+ *-[0-9]*|COPYING|dir) continue ;; \
esac ; \
- file=`echo $${file} | sed 's/\.info//'` ; \
- grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
+ cat=`sed -n 's/^INFO-DIR-SECTION //p' $${file}`; \
+ case $${cat} in \
+ "Texinfo documentation system" | "Emacs"| "Emacs lisp" | \
+ "Emacs editing modes" | "Emacs network features" | \
+ "Emacs misc features" | "Emacs lisp libraries" ) : ;; \
+ *) bad="$${bad} $${file}" ;; \
+ esac; \
done ; \
- if test -n "$${missing}"; then \
- echo "Missing info/dir entries: $${missing}" ; \
+ if test -n "$${bad}"; then \
+ echo "Unexpected dircategory in: $${bad}" ; \
exit 1 ; \
fi ; \
- echo "info/dir is OK"
+ echo "info files are OK"
#### Bootstrapping.
# * Run autogen.sh.
# * Rebuild Makefile, to update the build procedure itself.
# * Do the actual build.
-bootstrap: bootstrap-clean FRC
+bootstrap: bootstrap-clean
cd $(srcdir) && ./autogen.sh
$(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
- $(MAKE) $(MFLAGS) info all
+ $(MAKE) $(MFLAGS) all
.PHONY: check-declare