# DIST: make most of the changes to this file you might want, so try
# DIST: that first.
-# Copyright (C) 1992-2012 Free Software Foundation, Inc.
+# Copyright (C) 1992-2013 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# clean slate, and then build in the normal way.
+#
+# make docs
+# Make Emacs documentation files from their sources; requires makeinfo.
SHELL = /bin/sh
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
+# Prevent submakes from outputting "Entering directory ..." and
+# "Leaving directory..." diagnostics that would mess up 'make echo-info'.
+QUIET_SUBMAKE = MAKELEVEL=0
+
# ==================== Things `configure' Might Edit ====================
cache_file = @cache_file@
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
+### The nt/ subdirectory gets built only for MinGW
+NTDIR=@NTDIR@
+
# ==================== Where To Install Things ====================
# Location to install Emacs.app under GNUstep / Mac OS X.
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
MKDIR_P = @MKDIR_P@
-LN_S = @LN_S@
+# Create a link to a file in the same directory as the target.
+LN_S_FILEONLY = @LN_S_FILEONLY@
# We use gzip to compress installed .el files.
GZIP_PROG = @GZIP_PROG@
EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
-SUBDIR = lib lib-src src lisp leim
+SUBDIR = $(NTDIR) lib lib-src src lisp leim
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
-# Subdirectories to install, and where they'll go.
-# lib-src's makefile knows how to install it, so we don't do that here.
-# Directories that cannot simply be copied, eg info,
-# are treated separately.
-# quail appears twice because in out-of-tree builds, it exists twice.
+# Subdirectories to install, and where they'll go. lib-src's and nt's
+# makefiles know how to install them, so we don't do that here.
+# Directories that cannot simply be copied, eg info, are treated
+# separately. quail appears twice because in out-of-tree builds, it
+# exists twice.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
all: ${SUBDIR}
-.PHONY: all ${SUBDIR} blessmail epaths-force FRC
+.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-lib-src src: lib
+# Convert MSYS-style /x/foo or Windows-style x:\foo file names
+# into x:/foo that Windows can grok.
+msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
+
+# Transform directory search path and its components. Original can
+# be MSYS or Windows style. Set path separator to ";", directory
+# separator to "/" and transform MSYS-style "/c/" to "c:/".
+# Remove empty path components and escape semicolons.
+msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
+ -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
+ -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
+ -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
+
+# Replace "${prefix}" with '%emacs_dir%' (which expands to install
+# directory at runtime).
+msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
+
+# Quote Sed special characters (except backslash and newline) with
+# a double backslash.
+msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
+
+# The w32 build needs a slightly different editing, and it uses
+# nt/epaths.nt as the template.
+# Use the value of ${locallisppath} supplied by `configure',
+# to support the --enable-locallisppath argument.
+epaths-force-w32: FRC
+ @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ; \
+ prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
+ locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
+ sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
+ -e '/^.*#/s/@VER@/${version}/g' \
+ -e '/^.*#/s/@CFG@/${configuration}/g' \
+ -e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
+ ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
+
+lib-src src: $(NTDIR) lib
src: lib-src FRC
lisp leim: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp leim: Makefile FRC
+lib lib-src lisp leim nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
if [ -x ./config.status ]; then \
- ./config.status --recheck; \
+ $(CFG) ./config.status --recheck; \
else \
- $(srcdir)/configure $(CONFIGURE_FLAGS); \
+ $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
fi
AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
# ==================== Installation ====================
.PHONY: install install-arch-dep install-arch-indep install-doc install-info
-.PHONY: install-man install-etc install-strip uninstall
+.PHONY: install-man install-etc install-strip install-$(NTDIR)
+.PHONY: uninstall uninstall-$(NTDIR)
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-install: all install-arch-indep install-doc install-arch-dep blessmail
+install: all install-arch-indep install-doc install-arch-dep install-$(NTDIR) blessmail
@true
## Ensure that $subdir contains a subdirs.el file.
### Install the executables that were compiled specifically for this machine.
### We do install-arch-indep first because the executable needs the
### Lisp files and DOC file to work properly.
-install-arch-dep: src install-arch-indep install-doc
+install-arch-dep: src install-arch-indep install-doc install-$(NTDIR)
umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
cd lib-src && \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
INSTALL_STRIP=${INSTALL_STRIP}
if test "${ns_self_contained}" = "no"; then \
${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
- chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
+ chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
if test "x${NO_BIN_LINK}" = x; then \
rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
- cd $(DESTDIR)${bindir} && $(LN_S) $(EMACSFULL) $(EMACS); \
+ cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
fi; \
else \
subdir=${ns_appresdir}/site-lisp; \
rm -rf ${ns_appresdir}/share; \
fi
+### Windows-specific install target for installing programs produced
+### in nt/, and its Posix do-nothing shadow.
+install-:
+install-nt:
+ cd $(NTDIR) && \
+ $(MAKE) install $(MFLAGS) prefix=${prefix} \
+ exec_prefix=${exec_prefix} bindir=${bindir} \
+ libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ INSTALL_STRIP=${INSTALL_STRIP}
+
## In the share directory, we are deleting:
## applications (with emacs.desktop, also found in etc/)
## emacs (basically empty except for unneeded site-lisp directories)
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-## I'm not sure creating locallisppath here serves any useful purpose.
-## If it has the default value, then the later write_subdir commands
-## will ensure all these components exist.
-## This will only do something if locallisppath has a non-standard value.
-## Is it really Emacs's job to create those directories?
-## Should we also be ensuring they contain subdirs.el files?
-## It would be easy to do, just use write_subdir.
+## We used to create locallisppath, but if it points to non-standard
+## locations, is not really Emacs's job to create these directories,
+## so it is no longer done.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
- umask 022 ; \
- locallisppath='${locallisppath}'; \
- IFS=:; \
- for d in $$locallisppath; do \
- ${MKDIR_P} "$(DESTDIR)$$d"; \
- done
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
tar -xvf - && cat > /dev/null) || exit 1; \
[ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
for subdir in `find $${dest} -type d -print` ; do \
+ chmod a+rx $${subdir} ; \
rm -f $${subdir}/.gitignore ; \
rm -f $${subdir}/.arch-inventory ; \
rm -f $${subdir}/.DS_Store ; \
done )
-chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
-# The last chmod isn't needed at present.
-
-## We install only the relevant DOC file if possible
-## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
-## (Note "otherwise" is inaccurate since 2009-08-23.)
+## The above chmods are needed because "umask 022; tar ..." is not
+## guaranteed to do the right thing; eg if we are root and tar is
+## preserving source permissions.
## Note that install-arch-indep deletes and recreates the entire
## installed etc/ directory, so we need it to run before this does.
umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
then \
- fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
- if [ -f "./etc/DOC-$${fullversion}" ]; \
- then \
- docfile="DOC-$${fullversion}"; \
- else \
- docfile="DOC"; \
- fi; \
+ docfile="DOC"; \
echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
$(set_installuser); \
[ -f dir ] || \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
- info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
+ info_misc=`cd $${thisdir}/doc/misc && \
+ $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
+ `; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
done)
+## "gzip || true" is because some gzips exit with non-zero status
+## if compression would not reduce the file size. Eg, the gzip in
+## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
+## only happen with the tiny ctags.1 manpage. We don't really care if
+## ctags.1 is compressed or not. "gzip -f" is another option here,
+## but not sure if portable.
install-man:
umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest}; \
+ ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
done
## Install those items from etc/ that need to end up elsewhere.
### create (but not the noninstalled files such as `make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
-uninstall:
+uninstall: uninstall-$(NTDIR)
cd lib-src && \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+
-unset CDPATH; \
for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
if [ -d $${dir} ]; then \
done
-rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
thisdir=`/bin/pwd`; \
- (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
+ (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
if cd $(DESTDIR)${infodir}; then \
for elt in ${INFO_NONMISC} $${info_misc}; do \
(cd $${thisdir}; \
[ -s $${file} ] || rm -f $$file; \
done
+### Windows-specific uninstall target for removing programs produced
+### in nt/, and its Posix do-nothing shadow.
+uninstall-:
+uninstall-nt:
+ cd $(NTDIR) && \
+ $(MAKE) $(MFLAGS) uninstall \
+ prefix=${prefix} exec_prefix=${exec_prefix} \
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+
FRC:
# ==================== Cleaning up and miscellanea ====================
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd nt; $(MAKE) $(MFLAGS) mostlyclean)
-(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
-(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
-(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
+ (cd nt; $(MAKE) $(MFLAGS) clean)
-(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
-(cd doc/misc && $(MAKE) $(MFLAGS) clean)
-(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
+ (cd nt; $(MAKE) $(MFLAGS) distclean)
(cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
(cd doc/misc && $(MAKE) $(MFLAGS) distclean)
(cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd nt; $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
dist:
cd ${srcdir}; ./make-dist
+DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
+HTMLS = lispref-html lispintro-html emacs-html misc-html
+INFOS = lispref-info lispintro-info emacs-info misc-info
+PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
+PSS = lispref-ps lispintro-ps emacs-ps # no misc-ps
+
+DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
+$(DOCS):
+ t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
+
+.PHONY: $(DOCS) docs pdf ps
.PHONY: info dvi dist check html info-real force-info check-info-dir
-info-real:
- (cd doc/emacs; $(MAKE) $(MFLAGS) info)
- (cd doc/misc; $(MAKE) $(MFLAGS) info)
- (cd doc/lispref; $(MAKE) $(MFLAGS) info)
- (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
+docs: $(DOCS)
+dvi: $(DVIS)
+html: $(HTMLS)
+info-real: $(INFOS)
+pdf: $(PDFS)
+ps: $(PSS)
force-info:
# Note that man/Makefile knows how to put the info files in $(srcdir),
fi ; \
echo "info/dir is OK"
-dvi:
- (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
- (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
- (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
- (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
-
#### Bootstrapping.
### This first cleans the lisp subdirectory, removing all compiled