rem ----------------------------------------------------------------------\r
rem Configuration script for MSDOS\r
rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003\r
-rem 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.\r
+rem 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.\r
\r
rem This file is part of GNU Emacs.\r
\r
rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
rem\r
rem + msdos version 3 or better.\r
-rem + DJGPP version 1.12maint1 or later (version 2.03 or later recommended).\r
+rem + DJGPP version 2.0 or later (version 2.03 or later recommended).\r
rem + make utility that allows breaking of the 128 chars limit on\r
rem command lines. ndmake (as of version 4.5) won't work due to a\r
-rem line length limit. The make that comes with DJGPP does work.\r
-rem + rm and mv (from GNU file utilities).\r
+rem line length limit. The make that comes with DJGPP does work (and is\r
+rem recommended).\r
+rem + rm, mv, and cp (from GNU file utilities).\r
rem + sed (you can use the port that comes with DJGPP).\r
rem\r
rem You should be able to get all the above utilities from the DJGPP FTP\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+set sys_malloc=\r
if "%1" == "" goto usage\r
rem ----------------------------------------------------------------------\r
rem See if their environment is large enough. We need 28 bytes.\r
if "%1" == "--with-x" goto withx\r
if "%1" == "--no-debug" goto nodebug\r
if "%1" == "msdos" goto msdos\r
+if "%1" == "--with-system-malloc" goto sysmalloc\r
:usage\r
-echo Usage: config [--with-x] [--no-debug] msdos\r
+echo Usage: config [--no-debug] [--with-system-malloc] [--with-x] msdos\r
echo [Read the script before you run it.]\r
goto end\r
rem ----------------------------------------------------------------------\r
shift\r
goto again\r
rem ----------------------------------------------------------------------\r
+:sysmalloc\r
+set sys_malloc=Y\r
+shift\r
+goto again\r
+rem ----------------------------------------------------------------------\r
:msdos\r
Echo Checking whether 'sed' is available...\r
sed -e "w junk.$$$" <Nul\r
Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
Goto End\r
:go32Ok\r
-set djgpp_ver=1\r
-If ErrorLevel 20 set djgpp_ver=2\r
+set djgpp_ver=2\r
+If Not ErrorLevel 20 Echo To build 'Emacs' you need DJGPP v2.0 or later!\r
+If Not ErrorLevel 20 Goto End\r
rm -f junk.c junk junk.exe\r
-rem The v1.x build does not need djecho\r
-if "%DJGPP_VER%" == "1" Goto djechoOk\r
rem DJECHO is used by the top-level Makefile in the v2.x build\r
Echo Checking whether 'djecho' is available...\r
redir -o Nul -eo djecho -o junk.$$$ foo\r
if "%X11%" == "" goto src4\r
sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
:src4\r
-if "%DJGPP_VER%" == "2" Goto src41\r
-sed -f ../msdos/sed2.inp <config.tmp >config.h2\r
-goto src42\r
-:src41\r
sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r
-:src42\r
Rem See if DECL_ALIGN can be supported with this GCC\r
rm -f junk.c junk.o junk junk.exe\r
echo struct { int i; char *p; } __attribute__((__aligned__(8))) foo; >junk.c\r
rem For details see lisp.h where it defines USE_LSB_TAG\r
echo #define NO_DECL_ALIGN >>config.h2\r
:alignOk\r
+Rem See if they requested a SYSTEM_MALLOC build\r
+if "%sys_malloc%" == "" Goto cfgDone\r
+rm -f config.tmp\r
+ren config.h2 config.tmp\r
+sed -f ../msdos/sedalloc.inp <config.tmp >config.h2\r
+\r
+:cfgDone\r
rm -f junk.c junk junk.exe\r
update config.h2 config.h >nul\r
rm -f config.tmp config.h2\r
if exist dir.h ren dir.h vmsdir.h\r
\r
rem Create "makefile" from "makefile.in".\r
-rm -f Makefile junk.c\r
-sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c\r
-If "%DJGPP_VER%" == "1" Goto mfV1\r
-gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
-goto mfDone\r
-:mfV1\r
-gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile\r
-:mfDone\r
-rm -f junk.c\r
+rm -f Makefile makefile.tmp\r
+copy Makefile.in + deps.mk makefile.tmp\r
+sed -f ../msdos/sed1v2.inp <makefile.tmp >Makefile\r
+rm -f makefile.tmp\r
\r
if "%X11%" == "" goto src5\r
mv Makefile makefile.tmp\r
rm -f makefile.tmp\r
:src5\r
\r
+if "%sys_malloc%" == "" goto src5a\r
+sed -e "/^GMALLOC_OBJ *=/s/gmalloc.o//" <Makefile >makefile.tmp\r
+sed -e "/^VMLIMIT_OBJ *=/s/vm-limit.o//" <makefile.tmp >makefile.tmp2\r
+sed -e "/^RALLOC_OBJ *=/s/ralloc.o//" <makefile.tmp2 >Makefile\r
+rm -f makefile.tmp makefile.tmp2\r
+:src5a\r
+\r
if "%nodebug%" == "" goto src6\r
sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
rem ----------------------------------------------------------------------\r
Echo Configuring the library source directory...\r
cd lib-src\r
-rem Create "makefile" from "makefile.in".\r
-sed -e "1,/== start of cpp stuff ==/s@^#[ ].*$@@" <Makefile.in >junk.c\r
-gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
-If "%DJGPP_VER%" == "2" goto libsrc-v2\r
-sed -f ../msdos/sed3.inp <makefile.new >Makefile\r
-Goto libsrc2\r
-:libsrc-v2\r
-sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r
-:libsrc2\r
-rm -f makefile.new junk.c\r
+sed -f ../msdos/sed3v2.inp <Makefile.in >Makefile\r
+if "%X11%" == "" goto libsrc2a\r
+mv Makefile makefile.tmp\r
+sed -f ../msdos/sed3x.inp <makefile.tmp >Makefile\r
+rm -f makefile.tmp\r
+:libsrc2a\r
if "%nodebug%" == "" goto libsrc3\r
sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
rem ----------------------------------------------------------------------\r
:maindir\r
Echo Configuring the main directory...\r
-If "%DJGPP_VER%" == "1" goto mainv1\r
+If Exist .dir-locals.el update .dir-locals.el _dir-locals.el\r
+If Exist src\.dbxinit update src/.dbxinit src/_dbxinit\r
Echo Looking for the GDB init file...\r
If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
If Exist src\_gdbinit goto gdbinitOk\r
:gdbinitOk\r
Echo Looking for the GDB init file...found\r
copy msdos\mainmake.v2 Makefile >nul\r
-:mainv1\r
-If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r
rem ----------------------------------------------------------------------\r
goto End\r
:SmallEnv\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+set sys_malloc=\r
\r
goto skipArchTag\r
arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33\r