# Where to install Emacs's man pages, and what extension they should have.
mandir=@mandir@
manext=.1
+man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
SUBDIR = lib-src src
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
+SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile ${srcdir}/src/paths.h.in
- @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+src/paths.h: Makefile ${srcdir}/src/paths.in
+ @echo "Producing \`src/paths.h' from \`src/paths.in'."
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.h.in > paths.h.tmp$$$$ \
+ sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
- ${srcdir}/move-if-change paths.h.tmp$$$$ src/paths.h
+ ${srcdir}/move-if-change paths.h.$$$$ src/paths.h
# For `make all',
# we force the rebuilding of src/paths.h because the user might give
# make different values for the various directories. Since we use
# move-if-change, src/paths.h only actually changes if the user did
# something notable, so the only unnecessary work we do is in building
-# paths.h.tmp$$$$, which isn't much.
+# paths.h.$$, which isn't much.
# Note that sed is not in /bin on 386bsd.
# We depend on src/paths.h here to prevent simultaneous execution of
# that rule and this one, in a parallel make.
# It is possible for paths.h to be updated twice--but that would happen anyway.
paths-force: FRC src/paths.h
- @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+ @echo "Producing \`src/paths.h' from \`src/paths.in'."
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.h.in > paths.h.tmp$$$$ \
+ sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
- ${srcdir}/move-if-change paths.h.tmp$$$$ src/paths.h
+ ${srcdir}/move-if-change paths.h.$$$$ src/paths.h
src: lib-src FRC src/paths.h
Makefile: Makefile.in config.status
./config.status
-src/Makefile: src/Makefile.in.in config.status
+src/Makefile: src/Makefile.in config.status
./config.status
lib-src/Makefile: lib-src/Makefile.in config.status
## source exists and is distinct from the destination.
## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
## ever modify src/paths.h.
-install: ${SUBDIR} install-arch-dep install-arch-indep blessmail;
+install: ${SUBDIR} install-arch-dep install-arch-indep blessmail
+ @true
-### Note that we copy the DOC-* files from the build etc directory
-### as well as lots of things from ${srcdir}/etc.
+### Install the executables that were compiled specifically for this machine.
install-arch-dep: mkdir
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
rm -f ${bindir}/$(EMACS)
-ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
-### Note that we copy the DOC-* files from the build etc directory
-### as well as lots of things from ${srcdir}/etc.
+### Install the files that are machine-independent.
+### Most of them come straight from the distribution;
+### the exception is the DOC-* files, which are copied
+### from the build directory.
-# These lines appeared after the second -set, but should be unnecessary.
-# mkdir ${COPYDESTS} ; \
-# chmod ugo+rx ${COPYDESTS} ; \
-# The backslash above continues the comment onto this line. It ends here.
+### Note that we copy DOC* and then delete DOC
+### as a workaround for a bug in tar on Ultrix 4.2.
install-arch-indep: mkdir
-set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
- done
+ for dir in ${COPYDIR} ; do \
+ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
+ rm -rf $$1 ; \
+ fi ; \
+ shift ; \
+ done
-set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir}..." ; \
- (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -rf $${subdir}/CVS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- done) ; \
- done
+ mkdir ${COPYDESTS} ; \
+ chmod ugo+rx ${COPYDESTS} ; \
+ for dir in ${COPYDIR} ; do \
+ dest=$$1 ; shift ; \
+ [ -d $${dir} ] \
+ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
+ && (echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
+ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
+ rm -rf $${subdir}/RCS ; \
+ rm -rf $${subdir}/CVS ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/[mM]akefile* ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ rm -f $${subdir}/dired.todo ; \
+ done) ; \
+ done
-rm -f ${lispdir}/subdirs.el
$(srcdir)/update-subdirs ${lispdir}
+ chmod -R a+r ${COPYDESTS}
if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
then \
- echo "Copying etc/DOC-* ..." ; \
- (cd etc; tar -cf - DOC-*)|(cd ${docdir}; umask 0; tar -xvf - ); \
+ echo "Copying etc/DOC-* to ${docdir} ..." ; \
+ (cd etc; tar -cf - DOC*)|(cd ${docdir}; umask 0; tar -xvf - ); \
+ (cd $(docdir); chmod a+r DOC*; rm DOC) \
else true; fi
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
then \
- (cd ${srcdir}/info ; \
- if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
- (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
- fi ; \
- for f in cl* dired-x* emacs* forms* gnus* info* sc* vip* ; do \
- (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
+ (cd ${infodir}; \
+ if [ -f dir ]; then \
+ if [ ! -f dir.old ]; then mv -f dir dir.old; \
+ else mv -f dir dir.bak; fi; \
+ fi; \
+ cd ${srcdir}/info ; \
+ (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
+ (cd $${thisdir}; chmod a+r ${infodir}/dir); \
+ for f in cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
+ chmod a+r ${infodir}/$$f); \
done); \
else true; fi
- thisdir=`/bin/pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \
- (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \
+ thisdir=`/bin/pwd`; \
+ cd ${srcdir}/etc; \
+ for page in emacs etags ctags ; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
+ chmod a+r ${man1dir}/$${page}${manext}); \
done
### Build all the directories we're going to install Emacs in. Since
### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
mkdir: FRC
- $(srcdir)/mkinstalldirs ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
+ $(srcdir)/mkinstalldirs ${COPYDESTS} ${lockdir} ${infodir} ${man1dir} \
${bindir} ${datadir} ${docdir} ${libexecdir} \
`echo ${locallisppath} | sed 's/:/ /g'`
- -chmod 777 ${lockdir}
+ -chmod a+rwx ${lockdir}
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would
esac ; \
fi ; \
done
- (cd ${infodir} && rm -f cl* emacs* forms* info* vip*)
- (cd ${mandir} && rm -f emacs.1 etags.1 ctags.1)
+ (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
+ (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1)
(cd ${bindir} && rm -f emacs-${version} $(EMACS))
### `make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
- rm -f config.status ; \
+ rm -f config.status config.cache config.log ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
(cd lock && rm -f *)
distclean: FRC
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
(cd man && $(MAKE) $(MFLAGS) distclean)
${top_distclean}
-
### `maintainer-clean'
### Delete everything from the current directory that can be
HCoop / bpt / emacs.git / blobdiff