/* Lisp object printing and output streams.
- Copyright (C) 1985, 1986, 1988, 1993, 1994, 1995, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004,
- 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+Copyright (C) 1985-1986, 1988, 1993-1995, 1997-2011
+ Free Software Foundation, Inc.
This file is part of GNU Emacs.
#include "termhooks.h" /* For struct terminal. */
#include "font.h"
-Lisp_Object Vstandard_output, Qstandard_output;
+Lisp_Object Qstandard_output;
Lisp_Object Qtemp_buffer_setup_hook;
/* These are used to print like we read. */
-Lisp_Object Vfloat_output_format, Qfloat_output_format;
+Lisp_Object Qfloat_output_format;
#include <math.h>
#if STDC_HEADERS
#include <float.h>
#endif
+#include <ftoastr.h>
/* Default to values appropriate for IEEE floating point. */
-#ifndef FLT_RADIX
-#define FLT_RADIX 2
-#endif
-#ifndef DBL_MANT_DIG
-#define DBL_MANT_DIG 53
-#endif
#ifndef DBL_DIG
#define DBL_DIG 15
#endif
-#ifndef DBL_MIN
-#define DBL_MIN 2.2250738585072014e-308
-#endif
-
-#ifdef DBL_MIN_REPLACEMENT
-#undef DBL_MIN
-#define DBL_MIN DBL_MIN_REPLACEMENT
-#endif
-
-/* Define DOUBLE_DIGITS_BOUND, an upper bound on the number of decimal digits
- needed to express a float without losing information.
- The general-case formula is valid for the usual case, IEEE floating point,
- but many compilers can't optimize the formula to an integer constant,
- so make a special case for it. */
-#if FLT_RADIX == 2 && DBL_MANT_DIG == 53
-#define DOUBLE_DIGITS_BOUND 17 /* IEEE floating point */
-#else
-#define DOUBLE_DIGITS_BOUND ((int) ceil (log10 (pow (FLT_RADIX, DBL_MANT_DIG))))
-#endif
/* Avoid actual stack overflow in print. */
int print_depth;
char *print_buffer;
/* Size allocated in print_buffer. */
-int print_buffer_size;
+EMACS_INT print_buffer_size;
/* Chars stored in print_buffer. */
-int print_buffer_pos;
+EMACS_INT print_buffer_pos;
/* Bytes stored in print_buffer. */
-int print_buffer_pos_byte;
-
-/* Maximum length of list to print in full; noninteger means
- effectively infinity */
-
-Lisp_Object Vprint_length;
-
-/* Maximum depth of list to print in full; noninteger means
- effectively infinity. */
-
-Lisp_Object Vprint_level;
-
-/* Nonzero means print newlines in strings as \n. */
-
-int print_escape_newlines;
-
-/* Nonzero means to print single-byte non-ascii characters in strings as
- octal escapes. */
-
-int print_escape_nonascii;
-
-/* Nonzero means to print multibyte characters in strings as hex escapes. */
-
-int print_escape_multibyte;
+EMACS_INT print_buffer_pos_byte;
Lisp_Object Qprint_escape_newlines;
Lisp_Object Qprint_escape_multibyte, Qprint_escape_nonascii;
-/* Nonzero means print (quote foo) forms as 'foo, etc. */
-
-int print_quoted;
-
-/* Non-nil means print #: before uninterned symbols. */
-
-Lisp_Object Vprint_gensym;
-
-/* Non-nil means print recursive structures using #n= and #n# syntax. */
-
-Lisp_Object Vprint_circle;
-
-/* Non-nil means keep continuous number for #n= and #n# syntax
- between several print functions. */
-
-Lisp_Object Vprint_continuous_numbering;
-
-/* Vprint_number_table is a vector like [OBJ1 STAT1 OBJ2 STAT2 ...],
- where OBJn are objects going to be printed, and STATn are their status,
- which may be different meanings during process. See the comments of
- the functions print and print_preprocess for details.
- print_number_index keeps the last position the next object should be added,
- twice of which is the actual vector position in Vprint_number_table. */
+/* Vprint_number_table is a table, that keeps objects that are going to
+ be printed, to allow use of #n= and #n# to express sharing.
+ For any given object, the table can give the following values:
+ t the object will be printed only once.
+ -N the object will be printed several times and will take number N.
+ N the object has been printed so we can refer to it as #N#.
+ print_number_index holds the largest N already used.
+ N has to be striclty larger than 0 since we need to distinguish -N. */
int print_number_index;
-Lisp_Object Vprint_number_table;
-
-/* PRINT_NUMBER_OBJECT returns the I'th object in Vprint_number_table TABLE.
- PRINT_NUMBER_STATUS returns the status of the I'th object in TABLE.
- See the comment of the variable Vprint_number_table. */
-#define PRINT_NUMBER_OBJECT(table,i) XVECTOR ((table))->contents[(i) * 2]
-#define PRINT_NUMBER_STATUS(table,i) XVECTOR ((table))->contents[(i) * 2 + 1]
-
void print_interval (INTERVAL interval, Lisp_Object printcharfun);
/* GDB resets this to zero on W32 to disable OutputDebugString calls. */
-int print_output_debug_flag = 1;
+int print_output_debug_flag EXTERNALLY_VISIBLE = 1;
\f
/* Low level output routines for characters and strings */
#define PRINTDECLARE \
struct buffer *old = current_buffer; \
- int old_point = -1, start_point = -1; \
- int old_point_byte = -1, start_point_byte = -1; \
+ EMACS_INT old_point = -1, start_point = -1; \
+ EMACS_INT old_point_byte = -1, start_point_byte = -1; \
int specpdl_count = SPECPDL_INDEX (); \
int free_print_buffer = 0; \
- int multibyte = !NILP (current_buffer->enable_multibyte_characters); \
+ int multibyte = !NILP (BVAR (current_buffer, enable_multibyte_characters)); \
Lisp_Object original
#define PRINTPREPARE \
if (NILP (printcharfun)) \
{ \
Lisp_Object string; \
- if (NILP (current_buffer->enable_multibyte_characters) \
+ if (NILP (BVAR (current_buffer, enable_multibyte_characters)) \
&& ! print_escape_multibyte) \
specbind (Qprint_escape_multibyte, Qt); \
- if (! NILP (current_buffer->enable_multibyte_characters) \
+ if (! NILP (BVAR (current_buffer, enable_multibyte_characters)) \
&& ! print_escape_nonascii) \
specbind (Qprint_escape_nonascii, Qt); \
if (print_buffer != 0) \
if (NILP (printcharfun)) \
{ \
if (print_buffer_pos != print_buffer_pos_byte \
- && NILP (current_buffer->enable_multibyte_characters)) \
+ && NILP (BVAR (current_buffer, enable_multibyte_characters))) \
{ \
unsigned char *temp \
= (unsigned char *) alloca (print_buffer_pos + 1); \
- copy_text (print_buffer, temp, print_buffer_pos_byte, \
- 1, 0); \
- insert_1_both (temp, print_buffer_pos, \
+ copy_text ((unsigned char *) print_buffer, temp, \
+ print_buffer_pos_byte, 1, 0); \
+ insert_1_both ((char *) temp, print_buffer_pos, \
print_buffer_pos, 0, 1, 0); \
} \
else \
else
{
int multibyte_p
- = !NILP (current_buffer->enable_multibyte_characters);
+ = !NILP (BVAR (current_buffer, enable_multibyte_characters));
setup_echo_area_for_printing (multibyte_p);
insert_char (ch);
- message_dolog (str, len, 0, multibyte_p);
+ message_dolog ((char *) str, len, 0, multibyte_p);
}
}
}
to data in a Lisp string. Otherwise that is not safe. */
static void
-strout (const char *ptr, int size, int size_byte, Lisp_Object printcharfun,
- int multibyte)
+strout (const char *ptr, EMACS_INT size, EMACS_INT size_byte,
+ Lisp_Object printcharfun, int multibyte)
{
if (size < 0)
size_byte = size = strlen (ptr);
job. */
int i;
int multibyte_p
- = !NILP (current_buffer->enable_multibyte_characters);
+ = !NILP (BVAR (current_buffer, enable_multibyte_characters));
setup_echo_area_for_printing (multibyte_p);
message_dolog (ptr, size_byte, 0, multibyte_p);
int len;
for (i = 0; i < size_byte; i += len)
{
- int ch = STRING_CHAR_AND_LENGTH (ptr + i, len);
+ int ch = STRING_CHAR_AND_LENGTH ((const unsigned char *) ptr + i,
+ len);
insert_char (ch);
}
}
else
{
/* PRINTCHARFUN is a Lisp function. */
- int i = 0;
+ EMACS_INT i = 0;
if (size == size_byte)
{
corresponding character code before handing it to
PRINTCHAR. */
int len;
- int ch = STRING_CHAR_AND_LENGTH (ptr + i, len);
+ int ch = STRING_CHAR_AND_LENGTH ((const unsigned char *) ptr + i,
+ len);
PRINTCHAR (ch);
i += len;
}
{
if (EQ (printcharfun, Qt) || NILP (printcharfun))
{
- int chars;
+ EMACS_INT chars;
if (print_escape_nonascii)
string = string_escape_byte8 (string);
chars = SCHARS (string);
else if (! print_escape_nonascii
&& (EQ (printcharfun, Qt)
- ? ! NILP (buffer_defaults.enable_multibyte_characters)
- : ! NILP (current_buffer->enable_multibyte_characters)))
+ ? ! NILP (BVAR (&buffer_defaults, enable_multibyte_characters))
+ : ! NILP (BVAR (current_buffer, enable_multibyte_characters))))
{
/* If unibyte string STRING contains 8-bit codes, we must
convert STRING to a multibyte string containing the same
character codes. */
Lisp_Object newstr;
- int bytes;
+ EMACS_INT bytes;
chars = SBYTES (string);
bytes = parse_str_to_multibyte (SDATA (string), chars);
if (EQ (printcharfun, Qt))
{
/* Output to echo area. */
- int nbytes = SBYTES (string);
+ EMACS_INT nbytes = SBYTES (string);
char *buffer;
/* Copy the string contents so that relocation of STRING by
}
else
/* No need to copy, since output to print_buffer can't GC. */
- strout (SDATA (string),
+ strout (SSDATA (string),
chars, SBYTES (string),
printcharfun, STRING_MULTIBYTE (string));
}
{
/* Otherwise, string may be relocated by printing one char.
So re-fetch the string address for each character. */
- int i;
- int size = SCHARS (string);
- int size_byte = SBYTES (string);
+ EMACS_INT i;
+ EMACS_INT size = SCHARS (string);
+ EMACS_INT size_byte = SBYTES (string);
struct gcpro gcpro1;
GCPRO1 (string);
if (size == size_byte)
PRINTFINISH;
}
-/* Used from outside of print.c to print a block of SIZE
- single-byte chars at DATA on a specified stream PRINTCHARFUN.
+/* Used to print a block of SIZE single-byte chars at DATA on a
+ specified stream PRINTCHARFUN.
Do not use this on the contents of a Lisp string. */
-void
+static void
write_string_1 (const char *data, int size, Lisp_Object printcharfun)
{
PRINTDECLARE;
Fkill_all_local_variables ();
delete_all_overlays (current_buffer);
- current_buffer->directory = old->directory;
- current_buffer->read_only = Qnil;
- current_buffer->filename = Qnil;
- current_buffer->undo_list = Qt;
+ BVAR (current_buffer, directory) = BVAR (old, directory);
+ BVAR (current_buffer, read_only) = Qnil;
+ BVAR (current_buffer, filename) = Qnil;
+ BVAR (current_buffer, undo_list) = Qt;
eassert (current_buffer->overlays_before == NULL);
eassert (current_buffer->overlays_after == NULL);
- current_buffer->enable_multibyte_characters
- = buffer_defaults.enable_multibyte_characters;
+ BVAR (current_buffer, enable_multibyte_characters)
+ = BVAR (&buffer_defaults, enable_multibyte_characters);
specbind (Qinhibit_read_only, Qt);
specbind (Qinhibit_modification_hooks, Qt);
Ferase_buffer ();
specbind (Qstandard_output, buf);
}
+/* FIXME: Use Lisp's with-output-to-temp-buffer instead! */
Lisp_Object
internal_with_output_to_temp_buffer (const char *bufname, Lisp_Object (*function) (Lisp_Object), Lisp_Object args)
{
return unbind_to (count, val);
}
-
-DEFUN ("with-output-to-temp-buffer",
- Fwith_output_to_temp_buffer, Swith_output_to_temp_buffer,
- 1, UNEVALLED, 0,
- doc: /* Bind `standard-output' to buffer BUFNAME, eval BODY, then show that buffer.
-
-This construct makes buffer BUFNAME empty before running BODY.
-It does not make the buffer current for BODY.
-Instead it binds `standard-output' to that buffer, so that output
-generated with `prin1' and similar functions in BODY goes into
-the buffer.
-
-At the end of BODY, this marks buffer BUFNAME unmodifed and displays
-it in a window, but does not select it. The normal way to do this is
-by calling `display-buffer', then running `temp-buffer-show-hook'.
-However, if `temp-buffer-show-function' is non-nil, it calls that
-function instead (and does not run `temp-buffer-show-hook'). The
-function gets one argument, the buffer to display.
-
-The return value of `with-output-to-temp-buffer' is the value of the
-last form in BODY. If BODY does not finish normally, the buffer
-BUFNAME is not displayed.
-
-This runs the hook `temp-buffer-setup-hook' before BODY,
-with the buffer BUFNAME temporarily current. It runs the hook
-`temp-buffer-show-hook' after displaying buffer BUFNAME, with that
-buffer temporarily current, and the window that was used to display it
-temporarily selected. But it doesn't run `temp-buffer-show-hook'
-if it uses `temp-buffer-show-function'.
-
-usage: (with-output-to-temp-buffer BUFNAME BODY...) */)
- (Lisp_Object args)
-{
- struct gcpro gcpro1;
- Lisp_Object name;
- int count = SPECPDL_INDEX ();
- Lisp_Object buf, val;
-
- GCPRO1(args);
- name = Feval (Fcar (args));
- CHECK_STRING (name);
- temp_output_buffer_setup (SDATA (name));
- buf = Vstandard_output;
- UNGCPRO;
-
- val = Fprogn (XCDR (args));
-
- GCPRO1 (val);
- temp_output_buffer_show (buf);
- UNGCPRO;
-
- return unbind_to (count, val);
-}
-
\f
static void print (Lisp_Object obj, register Lisp_Object printcharfun, int escapeflag);
static void print_preprocess (Lisp_Object obj);
(Lisp_Object character)
{
CHECK_NUMBER (character);
- putc (XINT (character), stderr);
+ putc ((int) XINT (character), stderr);
#ifdef WINDOWSNT
/* Send the output to a debugger (nothing happens if there isn't one). */
* case of -1e307 in 20d float_output_format. What is one to do (short of
* re-writing _doprnt to be more sane)?
* -wsr
+ * Given the above, the buffer must be least FLOAT_TO_STRING_BUFSIZE bytes.
*/
void
-float_to_string (unsigned char *buf, double data)
+float_to_string (char *buf, double data)
{
- unsigned char *cp;
+ char *cp;
int width;
/* Check for plus infinity in a way that won't lose
lose:
{
/* Generate the fewest number of digits that represent the
- floating point value without losing information.
- The following method is simple but a bit slow.
- For ideas about speeding things up, please see:
-
- Guy L Steele Jr & Jon L White, How to print floating-point numbers
- accurately. SIGPLAN notices 25, 6 (June 1990), 112-126.
-
- Robert G Burger & R Kent Dybvig, Printing floating point numbers
- quickly and accurately, SIGPLAN notices 31, 5 (May 1996), 108-116. */
-
- width = fabs (data) < DBL_MIN ? 1 : DBL_DIG;
- do
- sprintf (buf, "%.*g", width, data);
- while (width++ < DOUBLE_DIGITS_BOUND && atof (buf) != data);
+ floating point value without losing information. */
+ dtoastr (buf, FLOAT_TO_STRING_BUFSIZE - 2, 0, 0, data);
+ /* The decimal point must be printed, or the byte compiler can
+ get confused (Bug#8033). */
+ width = 1;
}
else /* oink oink */
{
/* Check that the spec we have is fully valid.
This means not only valid for printf,
but meant for floats, and reasonable. */
- cp = SDATA (Vfloat_output_format);
+ cp = SSDATA (Vfloat_output_format);
if (cp[0] != '%')
goto lose;
if (cp[1] != 0)
goto lose;
- sprintf (buf, SDATA (Vfloat_output_format), data);
+ sprintf (buf, SSDATA (Vfloat_output_format), data);
}
/* Make sure there is a decimal point with digit after, or an
cp[1] = '0';
cp[2] = 0;
}
-
- if (*cp == 0)
+ else if (*cp == 0)
{
*cp++ = '.';
*cp++ = '0';
/* Construct Vprint_number_table for print-gensym and print-circle. */
if (!NILP (Vprint_gensym) || !NILP (Vprint_circle))
{
- int i, start, index;
- start = index = print_number_index;
/* Construct Vprint_number_table.
This increments print_number_index for the objects added. */
print_depth = 0;
print_preprocess (obj);
- /* Remove unnecessary objects, which appear only once in OBJ;
- that is, whose status is Qnil. Compactify the necessary objects. */
- for (i = start; i < print_number_index; i++)
- if (!NILP (PRINT_NUMBER_STATUS (Vprint_number_table, i)))
- {
- PRINT_NUMBER_OBJECT (Vprint_number_table, index)
- = PRINT_NUMBER_OBJECT (Vprint_number_table, i);
- index++;
- }
-
- /* Clear out objects outside the active part of the table. */
- for (i = index; i < print_number_index; i++)
- PRINT_NUMBER_OBJECT (Vprint_number_table, i) = Qnil;
-
- /* Reset the status field for the next print step. Now this
- field means whether the object has already been printed. */
- for (i = start; i < print_number_index; i++)
- PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qnil;
+ if (HASH_TABLE_P (Vprint_number_table))
+ { /* Remove unnecessary objects, which appear only once in OBJ;
+ that is, whose status is Qt.
+ Maybe a better way to do that is to copy elements to
+ a new hash table. */
+ struct Lisp_Hash_Table *h = XHASH_TABLE (Vprint_number_table);
+ int i;
- print_number_index = index;
+ for (i = 0; i < HASH_TABLE_SIZE (h); ++i)
+ if (!NILP (HASH_HASH (h, i))
+ && EQ (HASH_VALUE (h, i), Qt))
+ Fremhash (HASH_KEY (h, i), Vprint_number_table);
+ }
}
print_depth = 0;
&& SYMBOLP (obj)
&& !SYMBOL_INTERNED_P (obj)))
{
+ if (!HASH_TABLE_P (Vprint_number_table))
+ {
+ Lisp_Object args[2];
+ args[0] = QCtest;
+ args[1] = Qeq;
+ Vprint_number_table = Fmake_hash_table (2, args);
+ }
+
/* In case print-circle is nil and print-gensym is t,
add OBJ to Vprint_number_table only when OBJ is a symbol. */
if (! NILP (Vprint_circle) || SYMBOLP (obj))
{
- for (i = 0; i < print_number_index; i++)
- if (EQ (PRINT_NUMBER_OBJECT (Vprint_number_table, i), obj))
- {
- /* OBJ appears more than once. Let's remember that. */
- PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qt;
- print_depth--;
- return;
- }
-
- /* OBJ is not yet recorded. Let's add to the table. */
- if (print_number_index == 0)
- {
- /* Initialize the table. */
- Vprint_number_table = Fmake_vector (make_number (40), Qnil);
- }
- else if (XVECTOR (Vprint_number_table)->size == print_number_index * 2)
- {
- /* Reallocate the table. */
- int i = print_number_index * 4;
- Lisp_Object old_table = Vprint_number_table;
- Vprint_number_table = Fmake_vector (make_number (i), Qnil);
- for (i = 0; i < print_number_index; i++)
+ Lisp_Object num = Fgethash (obj, Vprint_number_table, Qnil);
+ if (!NILP (num)
+ /* If Vprint_continuous_numbering is non-nil and OBJ is a gensym,
+ always print the gensym with a number. This is a special for
+ the lisp function byte-compile-output-docform. */
+ || (!NILP (Vprint_continuous_numbering)
+ && SYMBOLP (obj)
+ && !SYMBOL_INTERNED_P (obj)))
+ { /* OBJ appears more than once. Let's remember that. */
+ if (!INTEGERP (num))
{
- PRINT_NUMBER_OBJECT (Vprint_number_table, i)
- = PRINT_NUMBER_OBJECT (old_table, i);
- PRINT_NUMBER_STATUS (Vprint_number_table, i)
- = PRINT_NUMBER_STATUS (old_table, i);
+ print_number_index++;
+ /* Negative number indicates it hasn't been printed yet. */
+ Fputhash (obj, make_number (- print_number_index),
+ Vprint_number_table);
}
+ print_depth--;
+ return;
}
- PRINT_NUMBER_OBJECT (Vprint_number_table, print_number_index) = obj;
- /* If Vprint_continuous_numbering is non-nil and OBJ is a gensym,
- always print the gensym with a number. This is a special for
- the lisp function byte-compile-output-docform. */
- if (!NILP (Vprint_continuous_numbering)
- && SYMBOLP (obj)
- && !SYMBOL_INTERNED_P (obj))
- PRINT_NUMBER_STATUS (Vprint_number_table, print_number_index) = Qt;
- print_number_index++;
+ else
+ /* OBJ is not yet recorded. Let's add to the table. */
+ Fputhash (obj, Qt, Vprint_number_table);
}
switch (XTYPE (obj))
print_preprocess (XVECTOR (obj)->contents[i]);
if (HASH_TABLE_P (obj))
{ /* For hash tables, the key_and_value slot is past
- `size' because it needs to be marked specially in case
- the table is weak. */
+ `size' because it needs to be marked specially in case
+ the table is weak. */
struct Lisp_Hash_Table *h = XHASH_TABLE (obj);
print_preprocess (h->key_and_value);
}
print_preprocess (interval->plist);
}
-/* A flag to control printing of `charset' text property.
- The default value is Qdefault. */
-Lisp_Object Vprint_charset_text_property;
-
static void print_check_string_charset_prop (INTERVAL interval, Lisp_Object string);
#define PRINT_STRING_NON_CHARSET_FOUND 1
#define PRINT_STRING_UNSAFE_CHARSET_FOUND 2
-/* Bitwize or of the abobe macros. */
+/* Bitwise or of the above macros. */
static int print_check_string_result;
static void
|| ! (print_check_string_result & PRINT_STRING_UNSAFE_CHARSET_FOUND))
{
int i, c;
- int charpos = interval->position;
- int bytepos = string_char_to_byte (string, charpos);
+ EMACS_INT charpos = interval->position;
+ EMACS_INT bytepos = string_char_to_byte (string, charpos);
Lisp_Object charset;
charset = XCAR (XCDR (val));
else
{
/* With the print-circle feature. */
- int i;
- for (i = 0; i < print_number_index; i++)
- if (EQ (PRINT_NUMBER_OBJECT (Vprint_number_table, i), obj))
- {
- if (NILP (PRINT_NUMBER_STATUS (Vprint_number_table, i)))
- {
- /* Add a prefix #n= if OBJ has not yet been printed;
- that is, its status field is nil. */
- sprintf (buf, "#%d=", i + 1);
- strout (buf, -1, -1, printcharfun, 0);
- /* OBJ is going to be printed. Set the status to t. */
- PRINT_NUMBER_STATUS (Vprint_number_table, i) = Qt;
- break;
- }
- else
- {
- /* Just print #n# if OBJ has already been printed. */
- sprintf (buf, "#%d#", i + 1);
- strout (buf, -1, -1, printcharfun, 0);
- return;
- }
- }
+ Lisp_Object num = Fgethash (obj, Vprint_number_table, Qnil);
+ if (INTEGERP (num))
+ {
+ int n = XINT (num);
+ if (n < 0)
+ { /* Add a prefix #n= if OBJ has not yet been printed;
+ that is, its status field is nil. */
+ sprintf (buf, "#%d=", -n);
+ strout (buf, -1, -1, printcharfun, 0);
+ /* OBJ is going to be printed. Remember that fact. */
+ Fputhash (obj, make_number (- n), Vprint_number_table);
+ }
+ else
+ {
+ /* Just print #n# if OBJ has already been printed. */
+ sprintf (buf, "#%d#", n);
+ strout (buf, -1, -1, printcharfun, 0);
+ return;
+ }
+ }
}
}
case Lisp_Float:
{
- char pigbuf[350]; /* see comments in float_to_string */
+ char pigbuf[FLOAT_TO_STRING_BUFSIZE];
float_to_string (pigbuf, XFLOAT_DATA (obj));
strout (pigbuf, -1, -1, printcharfun, 0);
print_string (obj, printcharfun);
else
{
- register int i, i_byte;
+ register EMACS_INT i, i_byte;
struct gcpro gcpro1;
unsigned char *str;
- int size_byte;
+ EMACS_INT size_byte;
/* 1 means we must ensure that the next character we output
cannot be taken as part of a hex character escape. */
int need_nonhex = 0;
PRINTCHAR ('f');
}
else if (multibyte
- && (CHAR_BYTE8_P (c)
+ && (CHAR_BYTE8_P (c)
|| (! ASCII_CHAR_P (c) && print_escape_multibyte)))
{
/* When multibyte is disabled,
For a char code that could be in a unibyte string,
when found in a multibyte string, always use a hex escape
so it reads back as multibyte. */
- unsigned char outbuf[50];
+ char outbuf[50];
if (CHAR_BYTE8_P (c))
sprintf (outbuf, "\\%03o", CHAR_TO_BYTE8 (c));
or when explicitly requested,
print single-byte non-ASCII string chars
using octal escapes. */
- unsigned char outbuf[5];
+ char outbuf[5];
sprintf (outbuf, "\\%03o", c);
strout (outbuf, -1, -1, printcharfun, 0);
}
register unsigned char *p = SDATA (SYMBOL_NAME (obj));
register unsigned char *end = p + SBYTES (SYMBOL_NAME (obj));
register int c;
- int i, i_byte, size_byte;
+ int i, i_byte;
+ EMACS_INT size_byte;
Lisp_Object name;
name = SYMBOL_NAME (obj);
{
PRINTCHAR ('(');
- /* If the first element is a backquote form,
- print it old-style so it won't be misunderstood. */
- if (print_quoted && CONSP (XCAR (obj))
- && CONSP (XCDR (XCAR (obj)))
- && NILP (XCDR (XCDR (XCAR (obj))))
- && EQ (XCAR (XCAR (obj)), Qbackquote))
- {
- Lisp_Object tem;
- tem = XCAR (obj);
- PRINTCHAR ('(');
-
- print_object (Qbackquote, printcharfun, 0);
- PRINTCHAR (' ');
-
- print_object (XCAR (XCDR (tem)), printcharfun, 0);
- PRINTCHAR (')');
-
- obj = XCDR (obj);
- }
-
{
- int print_length, i;
+ EMACS_INT print_length;
+ int i;
Lisp_Object halftail = obj;
/* Negative values of print-length are invalid in CL.
/* With the print-circle feature. */
if (i != 0)
{
- int i;
- for (i = 0; i < print_number_index; i++)
- if (EQ (PRINT_NUMBER_OBJECT (Vprint_number_table, i),
- obj))
- {
- if (NILP (PRINT_NUMBER_STATUS (Vprint_number_table, i)))
- {
- strout (" . ", 3, 3, printcharfun, 0);
- print_object (obj, printcharfun, escapeflag);
- }
- else
- {
- sprintf (buf, " . #%d#", i + 1);
- strout (buf, -1, -1, printcharfun, 0);
- }
- goto end_of_list;
- }
+ Lisp_Object num = Fgethash (obj, Vprint_number_table, Qnil);
+ if (INTEGERP (num))
+ {
+ strout (" . ", 3, 3, printcharfun, 0);
+ print_object (obj, printcharfun, escapeflag);
+ goto end_of_list;
+ }
}
}
register int i;
register unsigned char c;
struct gcpro gcpro1;
- int size_in_chars
+ EMACS_INT size_in_chars
= ((XBOOL_VECTOR (obj)->size + BOOL_VECTOR_BITS_PER_CHAR - 1)
/ BOOL_VECTOR_BITS_PER_CHAR);
if (!NILP (XWINDOW (obj)->buffer))
{
strout (" on ", -1, -1, printcharfun, 0);
- print_string (XBUFFER (XWINDOW (obj)->buffer)->name, printcharfun);
+ print_string (BVAR (XBUFFER (XWINDOW (obj)->buffer), name), printcharfun);
}
PRINTCHAR ('>');
}
else if (HASH_TABLE_P (obj))
{
struct Lisp_Hash_Table *h = XHASH_TABLE (obj);
- int i, real_size, size;
+ int i;
+ EMACS_INT real_size, size;
#if 0
strout ("#<hash-table", -1, -1, printcharfun, 0);
if (SYMBOLP (h->test))
if (!NILP (h->test))
{
strout (" test ", -1, -1, printcharfun, 0);
- print_object (h->test, printcharfun, 0);
+ print_object (h->test, printcharfun, escapeflag);
}
if (!NILP (h->weak))
{
strout (" weakness ", -1, -1, printcharfun, 0);
- print_object (h->weak, printcharfun, 0);
+ print_object (h->weak, printcharfun, escapeflag);
}
if (!NILP (h->rehash_size))
{
strout (" rehash-size ", -1, -1, printcharfun, 0);
- print_object (h->rehash_size, printcharfun, 0);
+ print_object (h->rehash_size, printcharfun, escapeflag);
}
if (!NILP (h->rehash_threshold))
{
strout (" rehash-threshold ", -1, -1, printcharfun, 0);
- print_object (h->rehash_threshold, printcharfun, 0);
+ print_object (h->rehash_threshold, printcharfun, escapeflag);
}
strout (" data ", -1, -1, printcharfun, 0);
if (NATNUMP (Vprint_length)
&& XFASTINT (Vprint_length) < size)
size = XFASTINT (Vprint_length);
-
+
PRINTCHAR ('(');
for (i = 0; i < size; i++)
if (!NILP (HASH_HASH (h, i)))
{
if (i) PRINTCHAR (' ');
- print_object (HASH_KEY (h, i), printcharfun, 1);
+ print_object (HASH_KEY (h, i), printcharfun, escapeflag);
PRINTCHAR (' ');
- print_object (HASH_VALUE (h, i), printcharfun, 1);
+ print_object (HASH_VALUE (h, i), printcharfun, escapeflag);
}
if (size < real_size)
}
else if (BUFFERP (obj))
{
- if (NILP (XBUFFER (obj)->name))
+ if (NILP (BVAR (XBUFFER (obj), name)))
strout ("#<killed buffer>", -1, -1, printcharfun, 0);
else if (escapeflag)
{
strout ("#<buffer ", -1, -1, printcharfun, 0);
- print_string (XBUFFER (obj)->name, printcharfun);
+ print_string (BVAR (XBUFFER (obj), name), printcharfun);
PRINTCHAR ('>');
}
else
- print_string (XBUFFER (obj)->name, printcharfun);
+ print_string (BVAR (XBUFFER (obj), name), printcharfun);
}
else if (WINDOW_CONFIGURATIONP (obj))
{
{
register int i;
register Lisp_Object tem;
- int real_size = size;
+ EMACS_INT real_size = size;
/* Don't print more elements than the specified maximum. */
if (NATNUMP (Vprint_length)
strout ("in no buffer", -1, -1, printcharfun, 0);
else
{
- sprintf (buf, "at %d", marker_position (obj));
+ sprintf (buf, "at %ld", (long)marker_position (obj));
strout (buf, -1, -1, printcharfun, 0);
strout (" in ", -1, -1, printcharfun, 0);
- print_string (XMARKER (obj)->buffer->name, printcharfun);
+ print_string (BVAR (XMARKER (obj)->buffer, name), printcharfun);
}
PRINTCHAR ('>');
break;
strout ("in no buffer", -1, -1, printcharfun, 0);
else
{
- sprintf (buf, "from %d to %d in ",
- marker_position (OVERLAY_START (obj)),
- marker_position (OVERLAY_END (obj)));
+ sprintf (buf, "from %ld to %ld in ",
+ (long)marker_position (OVERLAY_START (obj)),
+ (long)marker_position (OVERLAY_END (obj)));
strout (buf, -1, -1, printcharfun, 0);
- print_string (XMARKER (OVERLAY_START (obj))->buffer->name,
+ print_string (BVAR (XMARKER (OVERLAY_START (obj))->buffer, name),
printcharfun);
}
PRINTCHAR ('>');
Qtemp_buffer_setup_hook = intern_c_string ("temp-buffer-setup-hook");
staticpro (&Qtemp_buffer_setup_hook);
- DEFVAR_LISP ("standard-output", &Vstandard_output,
+ DEFVAR_LISP ("standard-output", Vstandard_output,
doc: /* Output stream `print' uses by default for outputting a character.
This may be any function of one argument.
It may also be a buffer (output is inserted before point)
Qstandard_output = intern_c_string ("standard-output");
staticpro (&Qstandard_output);
- DEFVAR_LISP ("float-output-format", &Vfloat_output_format,
+ DEFVAR_LISP ("float-output-format", Vfloat_output_format,
doc: /* The format descriptor string used to print floats.
This is a %-spec like those accepted by `printf' in C,
but with some restrictions. It must start with the two characters `%.'.
Qfloat_output_format = intern_c_string ("float-output-format");
staticpro (&Qfloat_output_format);
- DEFVAR_LISP ("print-length", &Vprint_length,
+ DEFVAR_LISP ("print-length", Vprint_length,
doc: /* Maximum length of list to print before abbreviating.
A value of nil means no limit. See also `eval-expression-print-length'. */);
Vprint_length = Qnil;
- DEFVAR_LISP ("print-level", &Vprint_level,
+ DEFVAR_LISP ("print-level", Vprint_level,
doc: /* Maximum depth of list nesting to print before abbreviating.
A value of nil means no limit. See also `eval-expression-print-level'. */);
Vprint_level = Qnil;
- DEFVAR_BOOL ("print-escape-newlines", &print_escape_newlines,
+ DEFVAR_BOOL ("print-escape-newlines", print_escape_newlines,
doc: /* Non-nil means print newlines in strings as `\\n'.
Also print formfeeds as `\\f'. */);
print_escape_newlines = 0;
- DEFVAR_BOOL ("print-escape-nonascii", &print_escape_nonascii,
+ DEFVAR_BOOL ("print-escape-nonascii", print_escape_nonascii,
doc: /* Non-nil means print unibyte non-ASCII chars in strings as \\OOO.
\(OOO is the octal representation of the character code.)
Only single-byte characters are affected, and only in `prin1'.
enabled regardless of the value of the variable. */);
print_escape_nonascii = 0;
- DEFVAR_BOOL ("print-escape-multibyte", &print_escape_multibyte,
+ DEFVAR_BOOL ("print-escape-multibyte", print_escape_multibyte,
doc: /* Non-nil means print multibyte characters in strings as \\xXXXX.
\(XXXX is the hex representation of the character code.)
This affects only `prin1'. */);
print_escape_multibyte = 0;
- DEFVAR_BOOL ("print-quoted", &print_quoted,
+ DEFVAR_BOOL ("print-quoted", print_quoted,
doc: /* Non-nil means print quoted forms with reader syntax.
I.e., (quote foo) prints as 'foo, (function foo) as #'foo. */);
print_quoted = 0;
- DEFVAR_LISP ("print-gensym", &Vprint_gensym,
+ DEFVAR_LISP ("print-gensym", Vprint_gensym,
doc: /* Non-nil means print uninterned symbols so they will read as uninterned.
I.e., the value of (make-symbol \"foobar\") prints as #:foobar.
When the uninterned symbol appears within a recursive data structure,
shared once again when the text is read back. */);
Vprint_gensym = Qnil;
- DEFVAR_LISP ("print-circle", &Vprint_circle,
+ DEFVAR_LISP ("print-circle", Vprint_circle,
doc: /* *Non-nil means print recursive structures using #N= and #N# syntax.
If nil, printing proceeds recursively and may lead to
`max-lisp-eval-depth' being exceeded or an error may occur:
where N is a positive decimal integer. */);
Vprint_circle = Qnil;
- DEFVAR_LISP ("print-continuous-numbering", &Vprint_continuous_numbering,
+ DEFVAR_LISP ("print-continuous-numbering", Vprint_continuous_numbering,
doc: /* *Non-nil means number continuously across print calls.
This affects the numbers printed for #N= labels and #M# references.
See also `print-circle', `print-gensym', and `print-number-table'.
This variable should not be set with `setq'; bind it with a `let' instead. */);
Vprint_continuous_numbering = Qnil;
- DEFVAR_LISP ("print-number-table", &Vprint_number_table,
+ DEFVAR_LISP ("print-number-table", Vprint_number_table,
doc: /* A vector used internally to produce `#N=' labels and `#N#' references.
The Lisp printer uses this vector to detect Lisp objects referenced more
than once.
that need to be recorded in the table. */);
Vprint_number_table = Qnil;
- DEFVAR_LISP ("print-charset-text-property", &Vprint_charset_text_property,
+ DEFVAR_LISP ("print-charset-text-property", Vprint_charset_text_property,
doc: /* A flag to control printing of `charset' text property on printing a string.
The value must be nil, t, or `default'.
print_prune_charset_plist = Qnil;
staticpro (&print_prune_charset_plist);
-
- defsubr (&Swith_output_to_temp_buffer);
}
-
-/* arch-tag: bc797170-94ae-41de-86e3-75e20f8f7a39
- (do not change this comment) */