@c Note: This document requires makeinfo version 4.6 or greater to build.
@c
@c %**start of header
-@setfilename ../../info/mh-e
+@setfilename ../../info/mh-e.info
@settitle The MH-E Manual
+@documentencoding UTF-8
@c %**end of header
@c Version of the software and manual.
This is version @value{VERSION}@value{EDITION} of @cite{The MH-E
Manual}, last updated @value{UPDATED}.
-Copyright @copyright{} 1995, 2001--2003, 2005--2013 Free Software
+Copyright @copyright{} 1995, 2001--2003, 2005--2014 Free Software
Foundation, Inc.
@c This dual license has been agreed upon by the FSF.
@item
the GNU Free Documentation License, Version 1.3 or any later version
published by the Free Software Foundation; with no Invariant Sections,
-with the Front-Cover texts being ``A GNU Manual,'' and with the
+with the Front-Cover Texts being ``A GNU Manual,'' and with the
Back-Cover Texts as in (a) below. A copy of the license is included in
the section entitled ``GNU Free Documentation License.''
@cite{GNU Emacs Manual},
@end iftex
@ifinfo
-@ref{top, , GNU Emacs Manual, emacs, GNU Emacs Manual},
+@ref{Top, , GNU Emacs Manual, emacs, GNU Emacs Manual},
@end ifinfo
@ifhtml
@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/,
the individual MH commands. When the name is not obvious, I'll guide
you to a relevant MH manual page that describes the action more fully.
-@cindex @cite{MH & nmh: Email for Users & Programmers}
+@c ":" does not work in index entries in Info.
+@cindex @cite{MH & nmh - Email for Users & Programmers}
@cindex MH book
@cindex info
@kindex C-h i
the more you can leverage its power. See the
@uref{@value{MH-BOOK-HOME}/../, MH book} to learn more about MH.
-@cindex @samp{Path:} MH profile component
+@cindex @samp{Path} MH profile component
@cindex MH profile
@cindex MH profile component
-@cindex MH profile component, @samp{Path:}
+@cindex MH profile component, @samp{Path}
Your MH environment includes your @dfn{MH profile} which is found in
the file @file{~/.mh_profile}, or the file named in the environment
@end quotation
@sp 1
-@cindex MH profile component, @samp{Draft-Folder:}
-@cindex MH profile component, @samp{Path:}
-@cindex MH profile component, @samp{Previous-Sequence:}
-@cindex MH profile component, @samp{Unseen-Sequence:}
-@cindex @samp{Draft-Folder:} MH profile component
-@cindex @samp{Path:} MH profile component
-@cindex @samp{Previous-Sequence:} MH profile component
-@cindex @samp{Unseen-Sequence:} MH profile component
+@cindex MH profile component, @samp{Draft-Folder}
+@cindex MH profile component, @samp{Path}
+@cindex MH profile component, @samp{Previous-Sequence}
+@cindex MH profile component, @samp{Unseen-Sequence}
+@cindex @samp{Draft-Folder} MH profile component
+@cindex @samp{Path} MH profile component
+@cindex @samp{Previous-Sequence} MH profile component
+@cindex @samp{Unseen-Sequence} MH profile component
@findex mh-find-path
@vindex mh-draft-folder
@vindex mh-find-path-hook
get a summary of all these commands with GNU Emacs online help: use
@kbd{C-h m} (@code{describe-mode}) for a brief summary of commands,
@kbd{?} (@code{mh-help}) for an even briefer summary@footnote{This
-help appears in a buffer called @samp{*MH-E Help*}
+help appears in a buffer called @file{*MH-E Help*}
(@pxref{Miscellaneous}).} (@kbd{C-c ?} in MH-Letter mode), or @kbd{C-h
i} to read this manual via Info. The online help is quite good; try
running @kbd{C-h C-h}. This brings up a list of available help topics,
@footnote{The @cite{GNU Emacs Lisp Reference Manual} may be available
online in the Info system by typing @kbd{C-h i m Emacs Lisp
@key{RET}}. It is also available online at @*
-@uref{http://www.gnu.org/savannah-checkouts/gnu/emacs/manual/html_node/elisp/}.
-You can also order a printed manual, which has the desirable
-side-effect of helping to support the Free Software Foundation which
-made all this great software available. You can find an order form by
-running @kbd{C-h C-d}, or you can request an order form from @i{gnu at
-gnu.org}.}
+@uref{http://www.gnu.org/software/emacs/manual/elisp.html}.}
@end iftex
@ifinfo
@footnote{@xref{Top, The GNU Emacs Lisp Reference Manual, , elisp, GNU
Emacs Lisp Reference Manual}, which may be available online in the
Info system. It is also available online at
-@uref{http://www.gnu.org/savannah-checkouts/gnu/emacs/manual/html_node/elisp/}.
-You can also order a printed manual, which has the desirable
-side-effect of helping to support the Free Software Foundation which
-made all this great software available. You can find an order form by
-running @kbd{C-h C-d}, or you can request an order form from @i{gnu at
-gnu.org}.}
+@uref{http://www.gnu.org/software/emacs/manual/elisp.html}.}
@end ifinfo
@ifhtml
@footnote{The
-@uref{http://www.gnu.org/savannah-checkouts/gnu/emacs/manual/html_node/elisp/,
+@uref{http://www.gnu.org/software/emacs/manual/elisp.html,
The GNU Emacs Lisp Reference Manual} may also be available online in
-the Info system by typing @kbd{C-h i m Emacs Lisp @key{RET}}. You can
-also order a printed manual, which has the desirable side-effect of
-helping to support the Free Software Foundation which made all this
-great software available. You can find an order form by running
-@kbd{C-h C-d}, or you can request an order form from @i{gnu at
-gnu.org}.}
+the Info system by typing @kbd{C-h i m Emacs Lisp @key{RET}}.}
@end ifhtml
and you can look at the code itself for examples. Look in the Emacs
Lisp directory on your system (such as
-@file{/usr/local/lib/emacs/lisp/mh-e}) and find all the @file{mh-*.el}
+@file{/usr/local/share/emacs/lisp/mh-e}) and find all the @file{mh-*.el}
files there. When calling MH-E and other Emacs Lisp functions directly
from Emacs Lisp code, you'll need to know the correct arguments. Use
the online help for this. For example, try @kbd{C-h f
header field should be generally ignored, please update
@uref{https://sourceforge.net/p/mh-e/bugs/245/, SF #245}.
-@cindex header field, @samp{Face:}
-@cindex header field, @samp{X-Face:}
-@cindex header field, @samp{X-Image-URL:}
-@cindex @samp{Face:} header field
-@cindex @samp{X-Face:} header field
-@cindex @samp{X-Image-URL:} header field
+@cindex header field, @samp{Face}
+@cindex header field, @samp{X-Face}
+@cindex header field, @samp{X-Image-URL}
+@cindex @samp{Face} header field
+@cindex @samp{X-Face} header field
+@cindex @samp{X-Image-URL} header field
@vindex mh-show-use-xface-flag
MH-E can display the content of @samp{Face:}, @samp{X-Face:}, and
MH-E cannot display all attachments inline however. It can display
text (including @sc{html}) and images.
-@cindex header field, @samp{Content-Disposition:}
+@cindex header field, @samp{Content-Disposition}
@cindex inline images
-@cindex @samp{Content-Disposition:} header field
+@cindex @samp{Content-Disposition} header field
@vindex mh-max-inline-image-height
@vindex mh-max-inline-image-width
@end ifinfo
@ifhtml
See
-@uref{http://www.dk.xemacs.org/Documentation/packages/html/pgg.html,
+@uref{http://www.gnu.org/software/emacs/manual/pgg.html,
@cite{The PGG Manual}}.
@end ifhtml
folders. Otherwise, list the folders that should be searched with the
@samp{Choose Folders} menu item. See @code{mh-recursive-folders-flag}.
-@cindex buffers, @samp{*MH-E Folders*}
-@cindex @samp{*MH-E Folders*}
+@cindex buffers, @file{*MH-E Folders*}
+@cindex @file{*MH-E Folders*}
@findex mh-kill-folder
@findex mh-list-folders
@findex mh-pack-folder
Other commands you can perform on folders include: @kbd{F l}
(@code{mh-list-folders}), to place a listing of all the folders in
-your mail directory in a buffer called @samp{*MH-E Folders*}
+your mail directory in a buffer called @file{*MH-E Folders*}
(@pxref{Miscellaneous}); @kbd{F k} (@code{mh-kill-folder}), to remove
a folder; @kbd{F S} (@code{mh-sort-folder}), to sort the messages by
date (see @command{sortm}(1) to see how to sort by other criteria);
The hook @code{mh-kill-folder-suppress-prompt-functions} is an abnormal
hook run at the beginning of the command @kbd{k}. The hook functions
-are called with no arguments and should return a non-nil value to
+are called with no arguments and should return a non-@code{nil} value to
suppress the normal prompt when you remove a folder. This is useful
for folders that are easily regenerated. The default value of
@code{mh-search-p} suppresses the prompt on folders generated by
@cindex @file{.mh_profile}
@cindex files, @file{.mh_profile}
@cindex MH commands, @command{sortm}
-@cindex MH profile component, @samp{sortm:}
-@cindex @samp{sortm:} MH profile component
+@cindex MH profile component, @samp{sortm}
+@cindex @samp{sortm} MH profile component
@kindex F S
@vindex mh-sortm-args
the @kbd{q} (@code{mh-quit}) command. This buries the buffers of the
current MH-E folder and restores the buffers that were present when
you first ran @kbd{M-x mh-rmail}. It also removes any MH-E working
-buffers whose name begins with @samp{ *mh-} or @samp{*MH-E }
+buffers whose name begins with @samp{ *mh-} or @file{*MH-E }
(@pxref{Miscellaneous}). You can later restore your MH-E session by
selecting the @samp{+inbox} buffer or by running @kbd{M-x mh-rmail}
again.
before the MH-Letter buffer appears, turn on the option
@code{mh-compose-prompt-flag}.
-@cindex header field, @samp{X-Mailer:}
-@cindex @samp{X-Mailer:} header field
+@cindex header field, @samp{X-Mailer}
+@cindex @samp{X-Mailer} header field
@vindex mh-insert-x-mailer-flag
MH-E adds an @samp{X-Mailer:} header field to the header that includes
@samp{Prompt} to one of the choices listed above. You can always edit
the recipients in the draft.
-@cindex @samp{repl:} MH profile component
-@cindex MH profile component, @samp{repl:}
+@cindex @samp{repl} MH profile component
+@cindex MH profile component, @samp{repl}
@cindex MH-Letter mode
@cindex MH-Show mode
@cindex draft
@cindex @file{.mh_profile}
@cindex files, @file{.mh_profile}
-@cindex MH profile component, @samp{forw:}
-@cindex @samp{forw:} MH profile component
+@cindex MH profile component, @samp{forw}
+@cindex @samp{forw} MH profile component
@vindex mh-compose-forward-as-mime-flag
By default, the option @code{mh-compose-forward-as-mime-flag} is on
@node Editing Message, Inserting Letter, Editing Drafts, Editing Drafts
@section Editing the Message
-@cindex @samp{Bcc:} header field
-@cindex @samp{Cc:} header field
-@cindex @samp{Dcc:} header field
-@cindex @samp{From:} header field
-@cindex @samp{Mail-Followup-To:} header field
-@cindex @samp{Mail-Reply-To:} header field
-@cindex @samp{Reply-To:} header field
-@cindex @samp{Subject:} header field
-@cindex @samp{To:} header field
+@cindex @samp{Bcc} header field
+@cindex @samp{Cc} header field
+@cindex @samp{Dcc} header field
+@cindex @samp{From} header field
+@cindex @samp{Mail-Followup-To} header field
+@cindex @samp{Mail-Reply-To} header field
+@cindex @samp{Reply-To} header field
+@cindex @samp{Subject} header field
+@cindex @samp{To} header field
@cindex editing header
-@cindex header field, @samp{Bcc:}
-@cindex header field, @samp{Cc:}
-@cindex header field, @samp{Dcc:}
-@cindex header field, @samp{From:}
-@cindex header field, @samp{Mail-Followup-To:}
-@cindex header field, @samp{Mail-Reply-To:}
-@cindex header field, @samp{Reply-To:}
-@cindex header field, @samp{Subject:}
-@cindex header field, @samp{To:}
+@cindex header field, @samp{Bcc}
+@cindex header field, @samp{Cc}
+@cindex header field, @samp{Dcc}
+@cindex header field, @samp{From}
+@cindex header field, @samp{Mail-Followup-To}
+@cindex header field, @samp{Mail-Reply-To}
+@cindex header field, @samp{Reply-To}
+@cindex header field, @samp{Subject}
+@cindex header field, @samp{To}
@findex mh-to-field
@kindex C-c C-f C-t
@kindex C-c C-f t
@vindex mh-yank-behavior
For example, if you use the hook function
-@uref{http://shasta.cs.uiuc.edu/~lrclause/tc.html,
+@uref{http://www.emacswiki.org/emacs/TrivialCite,
@code{trivial-cite}} (which is NOT part of Emacs), set
@code{mh-yank-behavior} to @samp{Body and Header}.
placing your image in the file named by the option
@code{mh-x-face-file} which is @file{~/.face} by default.
-@cindex @samp{Face:} header field
-@cindex @samp{X-Face:} header field
-@cindex @samp{X-Image-URL:} header field
-@cindex header field, @samp{Face:}
-@cindex header field, @samp{X-Face:}
-@cindex header field, @samp{X-Image-URL:}
+@cindex @samp{Face} header field
+@cindex @samp{X-Face} header field
+@cindex @samp{X-Image-URL} header field
+@cindex header field, @samp{Face}
+@cindex header field, @samp{X-Face}
+@cindex header field, @samp{X-Image-URL}
If the file starts with either of the strings @samp{X-Face:},
@samp{Face:} or @samp{X-Image-URL:} then the contents are added to the
@end ifinfo
@ifhtml
See
-@uref{http://www.dk.xemacs.org/Documentation/packages/html/pgg.html,
+@uref{http://www.gnu.org/software/emacs/manual/pgg.html,
@cite{The PGG Manual}}.
@end ifhtml
-@cindex header field, @samp{Fcc:}
-@cindex @samp{Fcc:} header field
+@cindex header field, @samp{Fcc}
+@cindex @samp{Fcc} header field
@vindex pgg-encrypt-for-me
In particular, I turn on the option @code{pgg-encrypt-for-me} so that
@node Checking Recipients, Sending Message, Sending PGP, Editing Drafts
@section Checking Recipients
-@cindex @samp{*MH-E Recipients*}
+@cindex @file{*MH-E Recipients*}
@cindex @command{whom}
@cindex MH commands, @command{whom}
-@cindex buffers, @samp{*MH-E Recipients*}
+@cindex buffers, @file{*MH-E Recipients*}
@cindex checking recipients
@cindex recipients, checking
@findex mh-check-whom
The command @kbd{C-c C-w} (@code{mh-check-whom}) expands aliases so
you can check the actual address(es) in the alias. A new buffer named
-@samp{*MH-E Recipients*} is created with the output of @command{whom}
+@file{*MH-E Recipients*} is created with the output of @command{whom}
(@pxref{Miscellaneous})@footnote{See the section
@uref{@value{MH-BOOK-HOME}/senove.html#WhaPro, What now?---and the
whatnow Program} in the MH book.}.
@node Sending Message, Killing Draft, Checking Recipients, Editing Drafts
@section Sending a Message
-@cindex buffers, @samp{*MH-E Mail Delivery*}
-@cindex @samp{*MH-E Mail Delivery*}
+@cindex buffers, @file{*MH-E Mail Delivery*}
+@cindex @file{*MH-E Mail Delivery*}
@cindex sending mail
@findex mh-send-letter
@kindex C-c C-c
When you are all through editing a message, you send it with the
command @kbd{C-c C-c} (@code{mh-send-letter}). You can give a prefix
argument (as in @kbd{C-u C-c C-c}) to monitor the first stage of the
-delivery; this output can be found in a buffer called @samp{*MH-E Mail
+delivery; this output can be found in a buffer called @file{*MH-E Mail
Delivery*} (@pxref{Miscellaneous}).
@cindex sending mail
@cindex @command{ali}
@cindex @file{/etc/nmh/MailAliases}
-@cindex @samp{Aliasfile:} MH profile component
+@cindex @samp{Aliasfile} MH profile component
@cindex MH commands, @command{ali}
-@cindex MH profile component, @samp{Aliasfile:}
+@cindex MH profile component, @samp{Aliasfile}
@cindex files, @file{/etc/nmh/MailAliases}
MH-E loads aliases for completion and folder name hints from various
below}. The @samp{Value Menu} has the following menu items:
@table @samp
-@cindex header field, @samp{From:}
-@cindex @samp{From:} header field
+@cindex header field, @samp{From}
+@cindex @samp{From} header field
@item From Field
Specify an alternate @samp{From:} header field. You must include a
valid email address. A standard format is @samp{First Last
must quote your name as in @samp{"First I. Last"
<login@@host.domain>}.
@c -------------------------
-@cindex header field, @samp{Organization:}
-@cindex @samp{Organization:} header field
+@cindex header field, @samp{Organization}
+@cindex @samp{Organization} header field
@item Organization Field
People usually list the name of the company where they work here.
@c -------------------------
All of the information for that identity will be added if the
recipient matches.
@c -------------------------
-@cindex @samp{Fcc:} header field
-@cindex header field, @samp{Fcc:}
+@cindex @samp{Fcc} header field
+@cindex header field, @samp{Fcc}
@item Fcc Field
Insert an @samp{Fcc:} header field with the folder you provide. When
you send the message, MH will put a copy of your message in this
folder.
@c -------------------------
-@cindex @samp{Mail-Followup-To:} header field
-@cindex header field, @samp{Mail-Followup-To:}
+@cindex @samp{Mail-Followup-To} header field
+@cindex header field, @samp{Mail-Followup-To}
@item Mail-Followup-To Field
Insert an @samp{Mail-Followup-To:} header field with the recipients
you provide. If the recipient's mail user agent supports this header
@cindex @command{procmail}
@cindex Unix commands, @command{procmail}
-@cindex @samp{X-MHE-Checksum:} header field
-@cindex header field, @samp{X-MHE-Checksum:}
+@cindex @samp{X-MHE-Checksum} header field
+@cindex header field, @samp{X-MHE-Checksum}
Note: This command uses an @samp{X-MHE-Checksum:} header field to
cache the MD5 checksum of a message. This means that if an incoming
mh-thread.elc} or otherwise find MH-E on your system and ensure that
@file{mh-thread.elc} exists. If you have multiple versions and you
find that one is compiled but the other is not, then go into your
-@samp{*scratch*} buffer in Emacs, enter @kbd{load-path C-j}, and
+@file{*scratch*} buffer in Emacs, enter @kbd{load-path C-j}, and
ensure that the byte-compiled version appears first in the
@code{load-path}. If you find that MH-E is not compiled and you
installed MH-E yourself, please refer to the installation directions
widen the view to all your messages again, use @kbd{S w}
(@code{mh-widen}).
-@cindex buffers, @samp{*MH-E Sequences*}
-@cindex @samp{*MH-E Sequences*}
+@cindex buffers, @file{*MH-E Sequences*}
+@cindex @file{*MH-E Sequences*}
@findex mh-list-sequences
@findex mh-msg-is-in-seq
@kindex S l
42 S s @key{RET}}). Or, you can list all sequences in a selected
folder (default is current folder) with @kbd{S l}
(@code{mh-list-sequences}). The list appears in a buffer named
-@samp{*MH-E Sequences*} (@pxref{Miscellaneous}).
+@file{*MH-E Sequences*} (@pxref{Miscellaneous}).
-@cindex MH profile component, @samp{Previous-Sequence:}
+@cindex MH profile component, @samp{Previous-Sequence}
@cindex @samp{cur} sequence
-@cindex @samp{Previous-Sequence:} MH profile component
+@cindex @samp{Previous-Sequence} MH profile component
@cindex sequence, @samp{cur}
@cindex sequence, @samp{Previous-Sequence}
@vindex mh-refile-preserves-sequences-flag
you want to delete the messages, use @kbd{C-u d} (@pxref{Reading
Mail}).
-@cindex @samp{Unseen-Sequence:} MH profile component
+@cindex @samp{Unseen-Sequence} MH profile component
@cindex @samp{cur} sequence
@cindex @samp{tick} sequence
-@cindex MH profile component, @samp{Unseen-Sequence:}
+@cindex MH profile component, @samp{Unseen-Sequence}
@cindex sequence, @samp{Unseen-Sequence}
@cindex sequence, @samp{cur}
@cindex sequence, @samp{tick}
incorrectly classified as spam. It then refiles the message into the
@file{+inbox} folder.
-@cindex MH profile component, @samp{Previous-Sequence:}
+@cindex MH profile component, @samp{Previous-Sequence}
@cindex @samp{cur} sequence
-@cindex @samp{Previous-Sequence:} MH profile component
+@cindex @samp{Previous-Sequence} MH profile component
@cindex sequence, @samp{cur}
@cindex sequence, @samp{Previous-Sequence}
@vindex mh-whitelist-preserves-sequences-flag
sequences in the destination folder. If this behavior is not desired,
then turn off the option @code{mh-whitelist-preserves-sequences-flag}.
-@cindex @samp{*MH-E Log*}
-@cindex buffers, @samp{*MH-E Log*}
+@cindex @file{*MH-E Log*}
+@cindex buffers, @file{*MH-E Log*}
@findex call-process
@vindex mh-junk-background
the option @code{mh-junk-background} is used as the @code{display}
argument in the call to @code{call-process}. Therefore, turning on
this option means setting its value to @samp{0}. You can also set its
-value to @samp{t} to direct the programs' output to the @samp{*MH-E
+value to @samp{t} to direct the programs' output to the @file{*MH-E
Log*} buffer; this may be useful for debugging.}
The following sections discuss the various counter-spam measures that
To use SpamAssassin, add the following recipes to @file{~/.procmailrc}:
@cindex @command{spamc}
-@cindex @samp{X-Spam-Level:} header field
-@cindex @samp{X-Spam-Status:} header field
-@cindex header field, @samp{X-Spam-Level:}
-@cindex header field, @samp{X-Spam-Status:}
+@cindex @samp{X-Spam-Level} header field
+@cindex @samp{X-Spam-Status} header field
+@cindex header field, @samp{X-Spam-Level}
+@cindex header field, @samp{X-Spam-Status}
@smallexample
PATH=$PATH:/usr/bin/mh
To use bogofilter, add the following recipes to @file{~/.procmailrc}:
-@cindex @samp{X-Bogosity:} header field
-@cindex header field, @samp{X-Bogosity:}
+@cindex @samp{X-Bogosity} header field
+@cindex header field, @samp{X-Bogosity}
@smallexample
PATH=$PATH:/usr/bin/mh
To use SpamProbe, add the following recipes to @file{~/.procmailrc}:
@cindex @command{formail}
-@cindex @samp{X-SpamProbe:} header field
-@cindex header field, @samp{X-SpamProbe:}
+@cindex @samp{X-SpamProbe} header field
+@cindex header field, @samp{X-SpamProbe}
@smallexample
PATH=$PATH:/usr/bin/mh
a virus). The second is to eliminate mail in character sets that you
can't read.
-@cindex @samp{Content-Transfer-Encoding:} header field
-@cindex @samp{Content-Type:} header field
-@cindex @samp{Subject:} header field
-@cindex header field, @samp{Content-Transfer-Encoding:}
-@cindex header field, @samp{Content-Type:}
-@cindex header field, @samp{Subject:}
+@cindex @samp{Content-Transfer-Encoding} header field
+@cindex @samp{Content-Type} header field
+@cindex @samp{Subject} header field
+@cindex header field, @samp{Content-Transfer-Encoding}
+@cindex header field, @samp{Content-Type}
+@cindex header field, @samp{Subject}
@smallexample
PATH=$PATH:/usr/bin/mh
system.
@end ftable
-@cindex buffers, @samp{*MH-E Info*}
+@cindex buffers, @file{*MH-E Info*}
@cindex MH-E version
-@cindex @samp{*MH-E Info*}
+@cindex @file{*MH-E Info*}
@cindex version
@kindex M-x mh-version
One command worth noting is @kbd{M-x mh-version}. You can compare the
version this command prints to the latest release (@pxref{Getting
MH-E}). The output of @kbd{M-x mh-version}, found in a buffer named
-@samp{*MH-E Info*}, should usually be included with any bug report you
+@file{*MH-E Info*}, should usually be included with any bug report you
submit (@pxref{Bug Reports}).
@subheading MH-E Buffers
several other buffers. They are:
@table @samp
-@cindex @samp{*MH-E Folders*}
-@cindex buffers, @samp{*MH-E Folders*}
+@cindex @file{*MH-E Folders*}
+@cindex buffers, @file{*MH-E Folders*}
@findex mh-list-folders
@item *MH-E Folders*
@kindex F l
This buffer contains the output of @kbd{F l} (@code{mh-list-folders}).
@xref{Folders}.
@c -------------------------
-@cindex @samp{*MH-E Help*}
-@cindex buffers, @samp{*MH-E Help*}
+@cindex @file{*MH-E Help*}
+@cindex buffers, @file{*MH-E Help*}
@findex mh-help
@item *MH-E Help*
@kindex ?
This buffer contains the output of @kbd{?} (@code{mh-help}) and
@kbd{C-c ?} in MH-Letter mode. @xref{Using This Manual}.
@c -------------------------
-@cindex @samp{*MH-E Info*}
-@cindex buffers, @samp{*MH-E Info*}
+@cindex @file{*MH-E Info*}
+@cindex buffers, @file{*MH-E Info*}
@item *MH-E Info*
This buffer contains the output of @kbd{M-x mh-version @key{RET}}.
@c -------------------------
-@cindex @samp{*MH-E Log*}
-@cindex buffers, @samp{*MH-E Log*}
+@cindex @file{*MH-E Log*}
+@cindex buffers, @file{*MH-E Log*}
@item *MH-E Log*
This buffer contains the last 100 lines of the output of the various
MH commands.
@c -------------------------
-@cindex @samp{*MH-E Mail Delivery*}
-@cindex buffers, @samp{*MH-E Mail Delivery*}
+@cindex @file{*MH-E Mail Delivery*}
+@cindex buffers, @file{*MH-E Mail Delivery*}
@item *MH-E Mail Delivery*
This buffer contains the transcript of a mail delivery. @xref{Sending
Message}.
@c -------------------------
-@cindex @samp{*MH-E Recipients*}
-@cindex buffers, @samp{*MH-E Recipients*}
+@cindex @file{*MH-E Recipients*}
+@cindex buffers, @file{*MH-E Recipients*}
@findex mh-check-whom
@item *MH-E Recipients*
@kindex C-c C-w
(@code{mh-check-whom}) and is killed when draft is sent.
@xref{Checking Recipients}.
@c -------------------------
-@cindex @samp{*MH-E Sequences*}
-@cindex buffers, @samp{*MH-E Sequences*}
+@cindex @file{*MH-E Sequences*}
+@cindex buffers, @file{*MH-E Sequences*}
@item *MH-E Sequences*
This buffer contains the output of @kbd{S l}
(@code{mh-list-sequences}). @xref{Sequences}.
@c -------------------------
-@cindex @samp{*mh-temp*}
-@cindex buffers, @samp{*mh-temp*}
+@cindex @file{*mh-temp*}
+@cindex buffers, @file{*mh-temp*}
@item *mh-temp*
This is a scratch, ephemeral, buffer used by MH-E functions. Note that
it is hidden because the first character in the name is a space.
Savannah issue #4361} to see if @command{rcvstore} locking is still an
issue.}.
-@cindex @samp{Unseen-Sequence:} MH profile component
-@cindex MH profile component, @samp{Unseen-Sequence:}
+@cindex @samp{Unseen-Sequence} MH profile component
+@cindex MH profile component, @samp{Unseen-Sequence}
Line 16 uses the following script, @code{myrcvstore}, to massage the
message as described in the comment and file the message in the given
HCoop / bpt / emacs.git / blobdiff