@echo off\r
rem ----------------------------------------------------------------------\r
rem Configuration script for MSDOS\r
-rem Copyright (C) 1994 Free Software Foundation, Inc.\r
+rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003\r
+rem 2004, 2005, 2006, 2007 Free Software Foundation, Inc.\r
\r
rem This file is part of GNU Emacs.\r
\r
rem GNU Emacs is free software; you can redistribute it and/or modify\r
rem it under the terms of the GNU General Public License as published by\r
-rem the Free Software Foundation; either version 2, or (at your option)\r
+rem the Free Software Foundation; either version 3, or (at your option)\r
rem any later version.\r
\r
rem GNU Emacs is distributed in the hope that it will be useful,\r
\r
rem You should have received a copy of the GNU General Public License\r
rem along with GNU Emacs; see the file COPYING. If not, write to the\r
-rem Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r
-rem Boston, MA 02111-1307, USA.\r
+rem Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,\r
+rem Boston, MA 02110-1301, USA.\r
rem ----------------------------------------------------------------------\r
rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
rem\r
rem + msdos version 3 or better.\r
-rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r
+rem + DJGPP version 1.12maint1 or later (version 2.03 or later recommended).\r
rem + make utility that allows breaking of the 128 chars limit on\r
rem command lines. ndmake (as of version 4.5) won't work due to a\r
-rem line length limit. The make that comes with djgpp does work.\r
+rem line length limit. The make that comes with DJGPP does work.\r
rem + rm and mv (from GNU file utilities).\r
rem + sed (you can use the port that comes with DJGPP).\r
rem\r
-rem You should be able to get all the above utilities from any SimTel\r
-rem repository, e.g. ftp.simtel.net, in the directory\r
-rem "pub/simtelnet/gnu/djgpp/v2gnu". As usual, please use your local\r
-rem mirroring site to reduce trans-Atlantic traffic.\r
+rem You should be able to get all the above utilities from the DJGPP FTP\r
+rem site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".\r
rem ----------------------------------------------------------------------\r
set X11=\r
set nodebug=\r
set djgpp_ver=1\r
If ErrorLevel 20 set djgpp_ver=2\r
rm -f junk.c junk junk.exe\r
+rem The v1.x build does not need djecho\r
+if "%DJGPP_VER%" == "1" Goto djechoOk\r
+rem DJECHO is used by the top-level Makefile in the v2.x build\r
+Echo Checking whether 'djecho' is available...\r
+redir -o Nul -eo djecho -o junk.$$$ foo\r
+If Exist junk.$$$ Goto djechoOk\r
+Echo To build 'Emacs' you need the 'djecho.exe' program!\r
+Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r
+Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.\r
+Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r
+Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r
+Echo Then run CONFIG.BAT again with the same arguments you did now.\r
+Goto End\r
+:djechoOk\r
+rm -f junk.$$$\r
Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
Rem ----------------------------------------------------------------------\r
Echo Configuring the source directory...\r
cd src\r
\r
-rem Create "paths.h"\r
-sed -f ../msdos/sed4.inp <paths.in >paths.tmp\r
-update paths.tmp paths.h >nul\r
-rm -f paths.tmp\r
+rem Create "epaths.h"\r
+sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r
+update epaths.tmp epaths.h >nul\r
+rm -f epaths.tmp\r
\r
rem Create "config.h"\r
rm -f config.h2 config.tmp\r
if "%X11%" == "" goto src4\r
sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
:src4\r
+if "%DJGPP_VER%" == "2" Goto src41\r
sed -f ../msdos/sed2.inp <config.tmp >config.h2\r
+goto src42\r
+:src41\r
+sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r
+:src42\r
+Rem See if DECL_ALIGN can be supported with this GCC\r
+rm -f junk.c junk.o junk junk.exe\r
+echo struct { int i; char *p; } __attribute__((__aligned__(8))) foo; >junk.c\r
+rem Two percent signs because it is a special character for COMMAND.COM/CMD\r
+rem Filter thru Sed because "&" is special for CMD.EXE\r
+echo int main(void) { return (unsigned long)"&"foo %% 8; } | sed "s/.&./\&/" >>junk.c\r
+gcc -o junk junk.c\r
+if not exist junk.exe coff2exe junk\r
+junk\r
+If Not ErrorLevel 1 Goto alignOk\r
+Echo WARNING: Your GCC does not support 8-byte aligned variables.\r
+Echo WARNING: Therefore Emacs cannot support buffers larger than 128MB.\r
+rem The following line disables DECL_ALIGN which in turn disables USE_LSB_TAG\r
+rem For details see lisp.h where it defines USE_LSB_TAG\r
+echo #define NO_DECL_ALIGN >>config.h2\r
+:alignOk\r
+rm -f junk.c junk junk.exe\r
update config.h2 config.h >nul\r
rm -f config.tmp config.h2\r
\r
\r
rem Create "makefile" from "makefile.in".\r
rm -f Makefile junk.c\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r
+sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c\r
If "%DJGPP_VER%" == "1" Goto mfV1\r
-gcc -E junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
+gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
goto mfDone\r
:mfV1\r
-gcc -E junk.c | sed -f ../msdos/sed1.inp >Makefile\r
+gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile\r
:mfDone\r
rm -f junk.c\r
\r
:src5\r
\r
if "%nodebug%" == "" goto src6\r
-sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:src6\r
Echo Configuring the library source directory...\r
cd lib-src\r
rem Create "makefile" from "makefile.in".\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r
-gcc -E -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
+sed -e "1,/== start of cpp stuff ==/s@^#[ ].*$@@" <Makefile.in >junk.c\r
+gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
If "%DJGPP_VER%" == "2" goto libsrc-v2\r
sed -f ../msdos/sed3.inp <makefile.new >Makefile\r
Goto libsrc2\r
:libsrc2\r
rm -f makefile.new junk.c\r
if "%nodebug%" == "" goto libsrc3\r
-sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:libsrc3\r
cd oldxmenu\r
sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
if "%nodebug%" == "" goto oldx2\r
-sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
mv -f makefile.tmp Makefile\r
:oldx2\r
cd ..\r
sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
cd ..\r
rem ----------------------------------------------------------------------\r
+Echo Configuring the ELisp manual directory...\r
+cd lispref\r
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+Echo Configuring the ELisp Introduction manual directory...\r
+Rem The two variants for the line below is for when the shell\r
+Rem supports long file names but DJGPP does not\r
+if exist lispintro\Makefile.in cd lispintro\r
+if exist lispintr\Makefile.in cd lispintr\r
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+Echo Configuring the lisp directory...\r
+cd lisp\r
+sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+If not Exist leim\quail\latin-pre.el goto maindir\r
+Echo Configuring the leim directory...\r
+cd leim\r
+sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+:maindir\r
Echo Configuring the main directory...\r
If "%DJGPP_VER%" == "1" goto mainv1\r
Echo Looking for the GDB init file...\r
-If not Exist src\_gdbinit If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
+If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
If Exist src\_gdbinit goto gdbinitOk\r
Echo ERROR:\r
Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+\r
+goto skipArchTag\r
+ arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33\r
+:skipArchTag\r