@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
-@c Copyright (C) 1990-1995, 1998-1999, 2001-2012
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1990-1995, 1998-1999, 2001-2013 Free Software
+@c Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@node Numbers
@chapter Numbers
@end tex
to
@ifnottex
-2**29 - 1),
+2**29 @minus{} 1),
@end ifnottex
@tex
@math{2^{29}-1}),
@end tex
-but some machines provide a wider range. Many examples in this
-chapter assume that an integer has 30 bits and that floating point
-numbers are IEEE double precision.
+but many machines provide a wider range. Many examples in this
+chapter assume the minimum integer width of 30 bits.
@cindex overflow
The Lisp reader reads an integer as a sequence of digits with optional
handle. It is negative.
@end defvar
- @xref{Character Codes, max-char}, for the maximum value of a valid
-character codepoint.
+ In Emacs Lisp, text characters are represented by integers. Any
+integer between zero and the value of @code{max-char}, inclusive, is
+considered to be valid as a character. @xref{String Basics}.
@node Float Basics
@section Floating Point Basics
not integral. The precise range of floating point numbers is
machine-specific; it is the same as the range of the C data type
@code{double} on the machine you are using. Emacs uses the
-@acronym{IEEE} floating point standard where possible (the standard is
-supported by most modern computers).
+@acronym{IEEE} floating point standard, which is supported by all
+modern computers.
The read syntax for floating point numbers requires either a decimal
point (with at least one digit following), an exponent, or both. For
infinity and negative infinity as floating point values. It also
provides for a class of values called NaN or ``not-a-number'';
numerical functions return such values in cases where there is no
-correct answer. For example, @code{(/ 0.0 0.0)} returns a NaN. (NaN
+correct answer. For example, @code{(/ 0.0 0.0)} returns a NaN@. (NaN
values can also carry a sign, but for practical purposes there's no
significant difference between different NaN values in Emacs Lisp.)
@emph{object}. By contrast, @code{=} compares only the numeric values
of the objects.
- At present, each integer value has a unique Lisp object in Emacs Lisp.
+ In Emacs Lisp, each integer value is a unique Lisp object.
Therefore, @code{eq} is equivalent to @code{=} where integers are
-concerned. It is sometimes convenient to use @code{eq} for comparing an
-unknown value with an integer, because @code{eq} does not report an
-error if the unknown value is not a number---it accepts arguments of any
-type. By contrast, @code{=} signals an error if the arguments are not
-numbers or markers. However, it is a good idea to use @code{=} if you
-can, even for comparing integers, just in case we change the
-representation of integers in a future Emacs version.
-
- Sometimes it is useful to compare numbers with @code{equal}; it
+concerned. It is sometimes convenient to use @code{eq} for comparing
+an unknown value with an integer, because @code{eq} does not report an
+error if the unknown value is not a number---it accepts arguments of
+any type. By contrast, @code{=} signals an error if the arguments are
+not numbers or markers. However, it is better programming practice to
+use @code{=} if you can, even for comparing integers.
+
+ Sometimes it is useful to compare numbers with @code{equal}, which
treats two numbers as equal if they have the same data type (both
integers, or both floating point) and the same value. By contrast,
@code{=} can treat an integer and a floating point number as equal.
it unchanged.
@end defun
-There are four functions to convert floating point numbers to integers;
-they differ in how they round. All accept an argument @var{number}
-and an optional argument @var{divisor}. Both arguments may be
-integers or floating point numbers. @var{divisor} may also be
+ There are four functions to convert floating point numbers to
+integers; they differ in how they round. All accept an argument
+@var{number} and an optional argument @var{divisor}. Both arguments
+may be integers or floating point numbers. @var{divisor} may also be
@code{nil}. If @var{divisor} is @code{nil} or omitted, these
functions convert @var{number} to an integer, or return it unchanged
if it already is an integer. If @var{divisor} is non-@code{nil}, they
divide @var{number} by @var{divisor} and convert the result to an
-integer. An @code{arith-error} results if @var{divisor} is 0.
+integer. integer. If @var{divisor} is zero (whether integer or
+floating-point), Emacs signals an @code{arith-error} error.
@defun truncate number &optional divisor
This returns @var{number}, converted to an integer by rounding towards
@section Arithmetic Operations
@cindex arithmetic operations
- Emacs Lisp provides the traditional four arithmetic operations:
-addition, subtraction, multiplication, and division. Remainder and modulus
-functions supplement the division functions. The functions to
-add or subtract 1 are provided because they are traditional in Lisp and
-commonly used.
-
- All of these functions except @code{%} return a floating point value
-if any argument is floating.
+ Emacs Lisp provides the traditional four arithmetic operations
+(addition, subtraction, multiplication, and division), as well as
+remainder and modulus functions, and functions to add or subtract 1.
+Except for @code{%}, each of these functions accepts both integer and
+floating point arguments, and returns a floating point number if any
+argument is a floating point number.
It is important to note that in Emacs Lisp, arithmetic functions
do not check for overflow. Thus @code{(1+ 536870911)} may evaluate to
divides @var{dividend} by each divisor in turn. Each argument may be a
number or a marker.
-If all the arguments are integers, then the result is an integer too.
-This means the result has to be rounded. On most machines, the result
-is rounded towards zero after each division, but some machines may round
-differently with negative arguments. This is because the Lisp function
-@code{/} is implemented using the C division operator, which also
-permits machine-dependent rounding. As a practical matter, all known
-machines round in the standard fashion.
-
-@cindex @code{arith-error} in division
-If you divide an integer by 0, an @code{arith-error} error is signaled.
-(@xref{Errors}.) Floating point division by zero returns either
-infinity or a NaN if your machine supports @acronym{IEEE} floating point;
-otherwise, it signals an @code{arith-error} error.
+If all the arguments are integers, the result is an integer, obtained
+by rounding the quotient towards zero after each division.
+(Hypothetically, some machines may have different rounding behavior
+for negative arguments, because @code{/} is implemented using the C
+division operator, which permits machine-dependent rounding; but this
+does not happen in practice.)
@example
@group
(/ 6 2)
@result{} 3
@end group
+@group
(/ 5 2)
@result{} 2
+@end group
+@group
(/ 5.0 2)
@result{} 2.5
+@end group
+@group
(/ 5 2.0)
@result{} 2.5
+@end group
+@group
(/ 5.0 2.0)
@result{} 2.5
+@end group
+@group
(/ 25 3 2)
@result{} 4
+@end group
@group
(/ -17 6)
- @result{} -2 @r{(could in theory be @minus{}3 on some machines)}
+ @result{} -2
@end group
@end example
+
+@cindex @code{arith-error} in division
+If you divide an integer by the integer 0, Emacs signals an
+@code{arith-error} error (@pxref{Errors}). If you divide a floating
+point number by 0, or divide by the floating point number 0.0, the
+result is either positive or negative infinity (@pxref{Float Basics}).
@end defun
@defun % dividend divisor
This function returns the integer remainder after division of @var{dividend}
by @var{divisor}. The arguments must be integers or markers.
-For negative arguments, the remainder is in principle machine-dependent
-since the quotient is; but in practice, all known machines behave alike.
+For any two integers @var{dividend} and @var{divisor},
+
+@example
+@group
+(+ (% @var{dividend} @var{divisor})
+ (* (/ @var{dividend} @var{divisor}) @var{divisor}))
+@end group
+@end example
-An @code{arith-error} results if @var{divisor} is 0.
+@noindent
+always equals @var{dividend}. If @var{divisor} is zero, Emacs signals
+an @code{arith-error} error.
@example
(% 9 4)
(% -9 -4)
@result{} -1
@end example
-
-For any two integers @var{dividend} and @var{divisor},
-
-@example
-@group
-(+ (% @var{dividend} @var{divisor})
- (* (/ @var{dividend} @var{divisor}) @var{divisor}))
-@end group
-@end example
-
-@noindent
-always equals @var{dividend}.
@end defun
@defun mod dividend divisor
by @var{divisor}, but with the same sign as @var{divisor}.
The arguments must be numbers or markers.
-Unlike @code{%}, @code{mod} returns a well-defined result for negative
-arguments. It also permits floating point arguments; it rounds the
-quotient downward (towards minus infinity) to an integer, and uses that
-quotient to compute the remainder.
+Unlike @code{%}, @code{mod} permits floating point arguments; it
+rounds the quotient downward (towards minus infinity) to an integer,
+and uses that quotient to compute the remainder.
If @var{divisor} is zero, @code{mod} signals an @code{arith-error}
error if both arguments are integers, and returns a NaN otherwise.
@defun sin arg
@defunx cos arg
@defunx tan arg
-These are the ordinary trigonometric functions, with argument measured
-in radians.
+These are the basic trigonometric functions, with argument @var{arg}
+measured in radians.
@end defun
@defun asin arg
returns a NaN.
@end defun
-@ignore
-@defun expm1 arg
-This function returns @code{(1- (exp @var{arg}))}, but it is more
-accurate than that when @var{arg} is negative and @code{(exp @var{arg})}
-is close to 1.
-@end defun
-
-@defun log1p arg
-This function returns @code{(log (1+ @var{arg}))}, but it is more
-accurate than that when @var{arg} is so small that adding 1 to it would
-lose accuracy.
-@end defun
-@end ignore
-
@defun log10 arg
This function returns the logarithm of @var{arg}, with base 10:
@code{(log10 @var{x})} @equiv{} @code{(log @var{x} 10)}.
@section Random Numbers
@cindex random numbers
-A deterministic computer program cannot generate true random numbers.
-For most purposes, @dfn{pseudo-random numbers} suffice. A series of
-pseudo-random numbers is generated in a deterministic fashion. The
-numbers are not truly random, but they have certain properties that
-mimic a random series. For example, all possible values occur equally
-often in a pseudo-random series.
+ A deterministic computer program cannot generate true random
+numbers. For most purposes, @dfn{pseudo-random numbers} suffice. A
+series of pseudo-random numbers is generated in a deterministic
+fashion. The numbers are not truly random, but they have certain
+properties that mimic a random series. For example, all possible
+values occur equally often in a pseudo-random series.
-In Emacs, pseudo-random numbers are generated from a ``seed''.
-Starting from any given seed, the @code{random} function always
-generates the same sequence of numbers. Emacs typically starts with a
-different seed each time, so the sequence of values of @code{random}
-typically differs in each Emacs run.
+ Pseudo-random numbers are generated from a ``seed''. Starting from
+any given seed, the @code{random} function always generates the same
+sequence of numbers. By default, Emacs initializes the random seed at
+startup, in such a way that the sequence of values of @code{random}
+(with overwhelming likelihood) differs in each Emacs run.
-Sometimes you want the random number sequence to be repeatable. For
+ Sometimes you want the random number sequence to be repeatable. For
example, when debugging a program whose behavior depends on the random
number sequence, it is helpful to get the same behavior in each
program run. To make the sequence repeat, execute @code{(random "")}.
series of pseudo-random integers.
If @var{limit} is a positive integer, the value is chosen to be
-nonnegative and less than @var{limit}. Otherwise, the value
-might be any integer representable in Lisp.
+nonnegative and less than @var{limit}. Otherwise, the value might be
+any integer representable in Lisp, i.e., an integer between
+@code{most-negative-fixnum} and @code{most-positive-fixnum}
+(@pxref{Integer Basics}).
If @var{limit} is @code{t}, it means to choose a new seed based on the
current time of day and on Emacs's process @acronym{ID} number.