### along with GNU Emacs; see the file COPYING. If not, write to
### the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
### Since Emacs has configuration requirements that autoconf can't
### meet, this file is an unholy marriage of custom-baked
### configuration code and autoconf macros.
### If configure fails after disturbing the status quo,
### config.status is removed.
-
### Remove any more than one leading "." element from the path name.
### If we don't remove them, then another "./" will be prepended to
### the file name each time we use config.status, and the program name
progname="`echo $0 | sed 's:^\./\./:\./:'`"
+### Establish some default values.
+run_in_place=
+single_tree=
+prefix='/usr/local'
+exec_prefix='${prefix}'
+bindir='${exec_prefix}/bin'
+datadir='${prefix}/lib'
+statedir='${prefix}/lib'
+libdir='${exec_prefix}/lib'
+mandir='${prefix}/man/man1'
+infodir='${prefix}/info'
+lispdir='${datadir}/emacs/${version}/lisp'
+locallisppath='${datadir}/emacs/site-lisp'
+lisppath='${locallisppath}:${lispdir}'
+etcdir='${datadir}/emacs/${version}/etc'
+lockdir='${statedir}/emacs/lock'
+archlibdir='${libdir}/emacs/${version}/${configuration}'
+CC=
+
+# We cannot use this variable in the case statement below, because many
+# /bin/sh's have broken semantics for "case". Unfortunately, you must
+# actually edit the clause itself.
+# path_options="prefix | exec_prefix | bindir | libdir | etcdir | datadir"
+# path_options="$path_options | archlibdir | statedir | mandir | infodir"
+# path_options="$path_options | lispdir | lockdir | lisppath | locallisppath"
+
#### Usage messages.
short_usage="Usage: ${progname} CONFIGURATION [-OPTION[=VALUE] ...]
--with-gcc=no Don't use GCC to compile Emacs.
--run-in-place Use libraries and data files directly out of the
source tree.
---srcdir=DIR Look for source in DIR.
---prefix=DIR Install files below dir.
+--single-tree=DIR Has the effect of creating a directory tree at DIR
+ which looks like:
+ .../DIR/bin/CONFIGNAME (emacs, etags, etc.)
+ .../DIR/bin/CONFIGNAME/etc (movemail, etc.)
+ .../DIR/common/lisp (emacs' lisp files)
+ .../DIR/common/site-lisp (local lisp files)
+ .../DIR/common/lib (DOC, TUTORIAL, etc.)
+ .../DIR/common/lock (lockfiles)
+--srcdir=DIR Look for the Emacs source files in DIR.
+--prefix=DIR Install files below DIR. Defaults to \`${prefix}'.
+
+You may also specify any of the \`path' variables found in Makefile.in,
+including --bindir, --libdir, --etcdir, --infodir, and so on. This allows
+you to override a single default location when configuring.
If successful, ${progname} leaves its status in config.status. If
unsuccessful after disturbing the status quo, it removes config.status."
### Record all the arguments, so we can save them in config.status.
arguments="$@"
-### These values are used to comment and uncomment different values
-### for the path variables in the Makefile, to choose the installed
-### configuration or the run-in-place configuration.
-rip_paths='#disabled# '
-inst_paths=''
-
-### Establish some default values.
-prefix='/usr/local'
-exec_prefix='${prefix}'
+### Shell Magic: Quote the quoted arguments in ARGUMENTS. At a later date,
+### in order to get the arguments back in $@, we have to do an
+### `eval set x "$quoted_arguments"; shift'.
+quoted_arguments=
+for i in "$@"; do
+ quoted_arguments="$quoted_arguments '$i'"
+done
### Don't use shift -- that destroys the argument list, which autoconf needs
### to produce config.status. It turns out that "set - ${arguments}" doesn't
### work portably.
-index=0
-while [ $index -lt $# ]; do
- index=`expr $index + 1`
- arg=`eval echo '$'$index`
+### However, it also turns out that many shells cannot expand ${10} at all.
+### So using an index variable doesn't work either. It is possible to use
+### some shell magic to make 'set x "$arguments"; shift' work portably.
+while [ $# != 0 ]; do
+ arg="$1"; shift
case "${arg}" in
## Anything starting with a hyphen we assume is an option.
-* )
-
## Separate the switch name from the value it's being given.
case "${arg}" in
-*=*)
## If the value was omitted, get it from the next argument.
if [ "${valomitted}" = "yes" ]; then
## Get the next argument from the argument list, if there is one.
- if [ $index = $# ]; then
+ if [ $# = 0 ]; then
(echo "${progname}: You must give a value for the \`--${optname}' option, as in
\`--${optname}=FOO'."
echo "${short_usage}") >&2
exit 1
fi
- index=`expr $index + 1`
- val=`eval echo '$'$index`
+ val="$1"; shift
fi
srcdir="${val}"
;;
## If the value was omitted, get it from the next argument.
if [ "${valomitted}" = "yes" ]; then
## Get the next argument from the argument list, if there is one.
- if [ $index = $# ]; then
+ if [ $# = 0 ]; then
(echo "${progname}: You must give a value for the \`--${optname}' option, as in
- \`--${optname}=FOO'."
+ \`--${optname}=/usr/local/X11/include'."
echo "${short_usage}") >&2
exit 1
fi
- index=`expr $index + 1`
- val=`eval echo '$'$index`
+ val="$1"; shift
fi
x_includes="${val}"
;;
## If the value was omitted, get it from the next argument.
if [ "${valomitted}" = "yes" ]; then
## Get the next argument from the argument list, if there is one.
- if [ $index = $# ]; then
+ if [ $# = 0 ]; then
(echo "${progname}: You must give a value for the \`--${optname}' option, as in
- \`--${optname}=FOO'."
+ \`--${optname}=/usr/local/X11/lib'."
echo "${short_usage}") >&2
exit 1
fi
- index=`expr $index + 1`
- val=`eval echo '$'$index`
+ val="$1"; shift
fi
x_libraries="${val}"
;;
## Should this use the "development configuration"?
"run_in_place" )
- rip_paths=''
- inst_paths='#disabled# '
+ single_tree=
+ run_in_place=1
;;
- ## Has the user specified an installation prefix?
- "prefix" )
- ## If the value was omitted, get it from the next argument.
- if [ "${valomitted}" = "yes" ]; then
- ## Get the next argument from the argument list, if there is one.
- if [ $index = $# ]; then
- (echo "${progname}: You must give a value for the \`--${optname}' option, as in
- \`--${optname}=FOO'."
- echo "${short_usage}") >&2
- exit 1
- fi
- index=`expr $index + 1`
- val=`eval echo '$'$index`
- fi
- prefix="${val}"
- ;;
+ ## Should this use the "single tree" configuration?
+ "single_tree" )
+ run_in_place=
+ single_tree=1
+ ;;
- ## Has the user specified an installation prefix?
- "exec_prefix" )
- ## If the value was omitted, get it from the next argument.
- if [ "${valomitted}" = "yes" ]; then
- ## Get the next argument from the argument list, if there is one.
- if [ $index = $# ]; then
- (echo "${progname}: You must give a value for the \`--${optname}' option, as in
- \`--${optname}=FOO'."
- echo "${short_usage}") >&2
- exit 1
- fi
- index=`expr $index + 1`
- val=`eval echo '$'$index`
- fi
- exec_prefix="${val}"
- ;;
+ ## Has the user specified one of the path options?
+ prefix | exec_prefix | bindir | libdir | etcdir | datadir | \
+ archlibdir | statedir | mandir | infodir | lispdir | lockdir | \
+ lisppath | locallisppath )
+ ## If the value was omitted, get it from the next argument.
+ if [ "${valomitted}" = "yes" ]; then
+ if [ $# = 0 ]; then
+ (echo \
+"$progname: You must give a value for the \`--${optname}' option,";
+ echo \
+"as in \`--${optname}=`eval echo '$'$optname`.'"
+ echo "$short_usage") >&2
+ exit 1
+ fi
+ val="$1"; shift
+ fi
+ eval "${opt}=\"${val}\""
+ eval "${opt}_specified=1"
+ ;;
## Verbose flag, tested by autoconf macros.
"verbose" )
esac
done
+### Get the arguments back. See the diatribe on Shell Magic above.
+eval set x "$quoted_arguments"; shift
+
if [ "${configuration}" = "" ]; then
echo '- You did not tell me what kind of host system you want to configure.
- I will attempt to guess the kind of system this is.' 1>&2
. )
## We may be able to use the $PWD environment variable to make this
## absolute. But sometimes PWD is inaccurate.
- if [ "${PWD}" != "" ] && [ "`(cd ${PWD} ; pwd)`" = "`pwd`" ] ; then
+ if [ "${PWD}" != "" ] && [ "`(cd ${PWD} ; sh -c pwd)`" = "`pwd`" ] ; then
srcdir="$PWD"
else
srcdir="`(cd ${srcdir}; pwd)`"
echo " use GNU make. If you do not have GNU make, then you must"
echo " now do \`make distclean' in ${srcdir},"
echo " and then run ${progname} again.") >&2
- # We need a multi-line sed script, which cannot go in a makefile.
- vpath_sed='-f vpath.sed'
-else
- # Do the normal substitution for VPATH. This will not crash non-GNU make.
- vpath_sed='-e '\''s|^\(VPATH *=\).*$$|\1 ='\''"${srcdir}/${subdir}|"'
+ extrasub='/^VPATH[ ]*=/c\
+vpath %.c $(srcdir)\
+vpath %.h $(srcdir)\
+vpath %.y $(srcdir)\
+vpath %.l $(srcdir)\
+vpath %.s $(srcdir)\
+vpath %.in $(srcdir)'
fi
-] AC_SUBST(vpath_sed) [
### Make the necessary directories, if they don't exist.
for dir in ./src ./lib-src ./cpp ./oldXMenu ./etc ; do
machine=symmetry opsys=bsd4-3
;;
+ ## Unspecified sysv on an ncr machine defaults to svr4.
+ i[34]86-ncr-sysv* )
+ machine=intel386 opsys=usg5-4
+ ;;
+
## Intel 860
- i860-*-sysvr4* )
+ i860-*-sysv4* )
machine=i860 opsys=usg5-4
;;
;;
mips-mips-riscos4* )
machine=mips4 opsys=bsd4-3
+ NON_GNU_CC="cc -systype bsd43"
;;
mips-mips-bsd* )
machine=mips opsys=bsd4-3
;;
## NeXT
- m68*-next-mach* | m68*-next-bsd* )
+ m68*-next-* )
machine=next opsys=mach2
;;
*-sunos4.0* ) opsys=sunos4-0 ;;
*-sunos4.1.3* ) opsys=sunos4-1-3 ;;
*-sunos4* | *-sunos ) opsys=sunos4-1 ;;
- *-sunos5* | *-solaris* ) opsys=sol2 ;;
+ *-sunos5.3* | *-solaris2.3* )
+ opsys=sol2-3
+ NON_GNU_CPP=/usr/ccs/lib/cpp
+ ;;
+ *-sunos5* | *-solaris* )
+ opsys=sol2
+ NON_GNU_CPP=/usr/ccs/lib/cpp
+ ;;
* ) opsys=bsd4-2 ;;
esac
;;
*-bsd386* ) opsys=bsd386 ;;
*-386bsd* ) opsys=386bsd ;;
*-netbsd* ) opsys=netbsd ;;
+ *-nextstep* ) opsys=mach2 ;;
## Otherwise, we'll fall through to the generic opsys code at the bottom.
esac
;;
#### Choose a compiler.
case ${with_gcc} in
"yes" ) CC="gcc" GCC=1 ;;
- "no" ) CC="cc" ;;
+ "no" ) CC=${CC:-"cc"} ;;
* )
] AC_PROG_CC [
esac
+#### Some systems specify a CPP to use unless we are using GCC.
+#### Now that we know whether we are using GCC, we can decide whether
+#### to use that one.
+if [ x$NON_GNU_CPP = x ] || [ x$GCC = x1 ]
+then true
+else
+ CPP=$NON_GNU_CPP
+fi
+
+#### Some systems specify a CC to use unless we are using GCC.
+#### Now that we know whether we are using GCC, we can decide whether
+#### to use that one.
+if [ x$NON_GNU_CC = x ] || [ x$GCC = x1 ]
+then true
+else
+ CC=$NON_GNU_CC
+fi
+
#### Some other nice autoconf tests. If you add a test here which
#### should make an entry in src/config.h, don't forget to add an
#### #undef clause to src/config.h.in for autoconf to modify.
dnl checks for UNIX variants that set `DEFS'
dnl checks for header files
-AC_HAVE_HEADERS(sys/timeb.h sys/time.h)
+AC_HAVE_HEADERS(sys/timeb.h sys/time.h unistd.h)
AC_STDC_HEADERS
AC_TIME_WITH_SYS_TIME
dnl other checks for UNIX variants
[
-
#### Choose a window system.
echo "Checking window system."
[ -n "${x_libraries}" ] && LD_SWITCH_X_SITE="-L${x_libraries}"
[ -n "${x_includes}" ] && C_SWITCH_X_SITE="-I${x_includes}"
+# Avoid forcing the search of /usr/include before fixed include files.
+if [ "$C_SWITCH_X_SITE" = "-I/usr/include" ]; then
+ C_SWITCH_X_SITE=" "
+fi
+
case "${window_system}" in
x11 )
HAVE_X_WINDOWS=yes
#ifndef C_SWITCH_SYSTEM
#define C_SWITCH_SYSTEM
#endif
-@configure@ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
-@configure@ c_switch_system=C_SWITCH_SYSTEM
+configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
+configure___ c_switch_system=C_SWITCH_SYSTEM
#ifndef LIB_X11_LIB
#define LIB_X11_LIB -lX11
#ifndef LIBX11_SYSTEM
#define LIBX11_SYSTEM
#endif
-@configure@ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM
+configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM
#ifdef UNEXEC
-@configure@ unexec=UNEXEC
+configure___ unexec=UNEXEC
#else
-@configure@ unexec=unexec.o
+configure___ unexec=unexec.o
#endif
#ifdef SYSTEM_MALLOC
-@configure@ system_malloc=yes
+configure___ system_malloc=yes
#else
-@configure@ system_malloc=no
+configure___ system_malloc=no
#endif
#ifndef C_DEBUG_SWITCH
#endif
#ifdef __GNUC__
-@configure@ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH
+configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH
#else
-@configure@ CFLAGS=C_DEBUG_SWITCH
+configure___ CFLAGS=C_DEBUG_SWITCH
#endif
' > ${tempcname}
# The value of CPP is a quoted variable reference, so we need to do this
# to get its actual value...
CPP=`eval "echo $CPP"`
eval `${CPP} -Isrc ${tempcname} \
- | grep '@configure@' \
- | sed -e 's/^@configure@ \([^=]*=\)\(.*\)$/\1"\2"/'`
+ | grep 'configure___' \
+ | sed -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/'`
rm ${tempcname}
### Compute the unexec source name from the object name.
if test "${HAVE_X11}" = "yes"; then
DEFS="$C_SWITCH_X_SITE $DEFS"
LIBS="$LD_SWITCH_X_SITE $LIBX $LIBS"
- AC_HAVE_FUNCS(XrmSetDatabase XScreenResourceString XScreenNumberOfScreen)
+ AC_HAVE_FUNCS(XrmSetDatabase XScreenResourceString XScreenNumberOfScreen XSetWMProtocols)
fi
AC_ALLOCA
# logb and frexp are found in -lm on most systems.
AC_HAVE_LIBRARY(-lm)
-AC_HAVE_FUNCS(gettimeofday gethostname dup2 rename closedir mkdir rmdir random bcopy logb frexp ftime)
+AC_HAVE_FUNCS(gettimeofday gethostname dup2 rename closedir mkdir rmdir random bcopy logb frexp ftime res_init setsid)
ok_so_far=true
AC_FUNC_CHECK(socket, , ok_so_far=)
AC_SUBST(configuration)
AC_SUBST(version)
AC_SUBST(srcdir)
+AC_SUBST(prefix)
+AC_SUBST(exec_prefix)
+AC_SUBST(bindir)
+AC_SUBST(datadir)
+AC_SUBST(statedir)
+AC_SUBST(libdir)
+AC_SUBST(mandir)
+AC_SUBST(infodir)
+AC_SUBST(lispdir)
+AC_SUBST(locallisppath)
+AC_SUBST(lisppath)
+AC_SUBST(etcdir)
+AC_SUBST(lockdir)
+AC_SUBST(archlibdir)
AC_SUBST(c_switch_system)
AC_SUBST(libsrc_libs)
-AC_SUBST(rip_paths)
-AC_SUBST(inst_paths)
AC_SUBST(LD_SWITCH_X_SITE)
AC_SUBST(C_SWITCH_X_SITE)
AC_SUBST(CFLAGS)
-AC_SUBST(prefix)
-AC_SUBST(exec_prefix)
AC_DEFINE_UNQUOTED(config_machfile, "\"${machfile}\"")
AC_DEFINE_UNQUOTED(config_opsysfile, "\"${opsysfile}\"")
] AC_DEFINE(LISP_FLOAT_TYPE) [
fi
+# ====================== Developer's configuration =======================
+
+# The following assignments make sense if you're running Emacs on a single
+# machine, one version at a time, and you want changes to the lisp and etc
+# directories in the source tree to show up immediately in your working
+# environment. It saves a great deal of disk space by not duplicating the
+# lisp and etc directories.
+
+if [ "$run_in_place" = "1" ]; then
+ lispdir='${srcdir}/lisp'
+ locallisppath='${srcdir}/site-lisp'
+ etcdir='${srcdir}/etc'
+ lockdir='${srcdir}/lock'
+ archlibdir='${srcdir}/lib-src'
+ infodir='${srcdir}/info'
+elif [ "$single_tree" = "1" ]; then
+ if [ "$exec_prefix_specified" = "" ]; then
+ exec_prefix='${prefix}'
+ fi
+ if [ "$bindir_specified" = "" ]; then
+ bindir='${exec_prefix}/bin/${configuration}'
+ fi
+ if [ "$datadir_specified" = "" ]; then
+ datadir='${prefix}/common'
+ fi
+ if [ "$statedir_specified" = "" ]; then
+ statedir='${prefix}/common'
+ fi
+ if [ "$libdir_specified" = "" ]; then
+ libdir='${bindir}'
+ fi
+ if [ "$lispdir_specified" = "" ]; then
+ lispdir='${prefix}/common/lisp'
+ fi
+ if [ "$locallisppath_specified" = "" ]; then
+ locallisppath='${prefix}/common/site-lisp'
+ fi
+ if [ "$lockdir_specified" = "" ]; then
+ lockdir='${prefix}/common/lock'
+ fi
+ if [ "$archlibdir_specified" = "" ]; then
+ archlibdir='${libdir}/etc'
+ fi
+ if [ "$etcdir_specified" = "" ]; then
+ etcdir='${prefix}/common/data'
+ fi
+fi
#### Report on what we decided to do.
echo "
test -n "${exec_prefix}" &&
exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`
]
-AC_OUTPUT(Makefile ${extra_output})
+AC_OUTPUT(Makefile lib-src/Makefile oldXMenu/Makefile src/Makefile.in) [
+# Build src/Makefile from ${srcdir}/src/Makefile.in. This must be done
+# after src/config.h is built, since we rely on that file. Only do the
+# build if "config.status" is present, since it's non-presence indicates
+# an error occured.
+status=$?
+if [ ! -f ./config.status ]; then
+ exit $status
+fi
+topsrcdir=${srcdir}
+ # We discard all lines in Makefile.in that start with `# Generated' or /**/#
+ # because some cpps get confused by them.
+ # Really we should preserve them somehow into Makefile,
+ # but that is beyond my level of shell programming.
+makefile_command='echo "creating src/Makefile";
+ topsrcdir='"${topsrcdir}"';
+( cd ./src;
+ rm -f junk.c;
+ sed -e '\''s/^# Generated.*//'\'' -e '\''s%/\*\*/#.*%%'\'' < Makefile.in > junk.c;
+ eval `echo ${CPP} -I. -I${topsrcdir}/src ${CPPFLAGS} junk.c \>junk.cpp`;
+ < junk.cpp '\
+' sed -e '\''s/^#.*//'\'' '\
+' -e '\''s/^[ \f\t][ \f\t]*$//'\'' '\
+' -e '\''s/^ / /'\'' '\
+' | sed -n -e '\''/^..*$/p'\'' '\
+' > Makefile.new;
+ chmod 444 Makefile.new;
+ mv -f Makefile.new Makefile;
+ rm -f junk.c junk.cpp;
+)'
+eval `echo $makefile_command`
+# AC-OUTPUT has created `config.status' already. We need to add the above
+# commands to re-create `src/Makefile', and we need to insert them before
+# the final "exit 0" which appears at the end of `config.status'.
+<config.status sed -e 's/^exit 0$//' >config.new
+echo $makefile_command >>config.new
+echo exit 0 >>config.new
+mv -f config.new config.status
+chmod +x config.status
+# Don't let the fact that we just rewrote config.status make Makefile think
+# that it is now newer. We have just rewritten all of the Makefiles as well.
+MFS="Makefile src/Makefile src/Makefile.in lib-src/Makefile oldXMenu/Makefile"
+for file in $MFS; do
+ chmod a+w $file; touch $file; chmod 444 $file
+done
+exit 0
+]
HCoop / bpt / emacs.git / blobdiff