@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
-@c Copyright (C) 1990-1995, 1998-1999, 2001-2012
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1990-1995, 1998-1999, 2001-2014 Free Software
+@c Foundation, Inc.
@c See the file elisp.texi for copying conditions.
-@setfilename ../../info/strings
-@node Strings and Characters, Lists, Numbers, Top
-@comment node-name, next, previous, up
+@node Strings and Characters
@chapter Strings and Characters
@cindex strings
@cindex character arrays
@node String Basics
@section String and Character Basics
- Characters are represented in Emacs Lisp as integers;
-whether an integer is a character or not is determined only by how it is
-used. Thus, strings really contain integers. @xref{Character Codes},
-for details about character representation in Emacs.
+ A character is a Lisp object which represents a single character of
+text. In Emacs Lisp, characters are simply integers; whether an
+integer is a character or not is determined only by how it is used.
+@xref{Character Codes}, for details about character representation in
+Emacs.
- The length of a string (like any array) is fixed, and cannot be
-altered once the string exists. Strings in Lisp are @emph{not}
-terminated by a distinguished character code. (By contrast, strings in
-C are terminated by a character with @acronym{ASCII} code 0.)
+ A string is a fixed sequence of characters. It is a type of
+sequence called a @dfn{array}, meaning that its length is fixed and
+cannot be altered once it is created (@pxref{Sequences Arrays
+Vectors}). Unlike in C, Emacs Lisp strings are @emph{not} terminated
+by a distinguished character code.
Since strings are arrays, and therefore sequences as well, you can
-operate on them with the general array and sequence functions.
-(@xref{Sequences Arrays Vectors}.) For example, you can access or
+operate on them with the general array and sequence functions documented
+in @ref{Sequences Arrays Vectors}. For example, you can access or
change individual characters in a string using the functions @code{aref}
-and @code{aset} (@pxref{Array Functions}).
+and @code{aset} (@pxref{Array Functions}). However, note that
+@code{length} should @emph{not} be used for computing the width of a
+string on display; use @code{string-width} (@pxref{Size of Displayed
+Text}) instead.
- There are two text representations for non-@acronym{ASCII} characters in
-Emacs strings (and in buffers): unibyte and multibyte (@pxref{Text
-Representations}). For most Lisp programming, you don't need to be
-concerned with these two representations.
+ There are two text representations for non-@acronym{ASCII}
+characters in Emacs strings (and in buffers): unibyte and multibyte.
+For most Lisp programming, you don't need to be concerned with these
+two representations. @xref{Text Representations}, for details.
Sometimes key sequences are represented as unibyte strings. When a
unibyte string is a key sequence, string elements in the range 128 to
representations and to encode and decode character codes.
@node Predicates for Strings
-@section The Predicates for Strings
+@section Predicates for Strings
For more information about general sequence and array predicates,
see @ref{Sequences Arrays Vectors}, and @ref{Arrays}.
combine-and-quote-strings}.
@end defun
-@defun split-string string &optional separators omit-nulls
+@defun split-string string &optional separators omit-nulls trim
This function splits @var{string} into substrings based on the regular
expression @var{separators} (@pxref{Regular Expressions}). Each match
for @var{separators} defines a splitting point; the substrings between
@result{} ("o" "o" "o")
@end example
+If the optional argument @var{trim} is non-@code{nil}, it should be a
+regular expression to match text to trim from the beginning and end of
+each substring. If trimming makes the substring empty, it is treated
+as null.
+
If you need to split a string into a list of individual command-line
arguments suitable for @code{call-process} or @code{start-process},
see @ref{Shell Arguments, split-string-and-unquote}.
@defun string= string1 string2
This function returns @code{t} if the characters of the two strings
match exactly. Symbols are also allowed as arguments, in which case
-their print names are used.
-Case is always significant, regardless of @code{case-fold-search}.
+the symbol names are used. Case is always significant, regardless of
+@code{case-fold-search}.
+
+This function is equivalent to @code{equal} for comparing two strings
+(@pxref{Equality Predicates}). In particular, the text properties of
+the two strings are ignored; use @code{equal-including-properties} if
+you need to distinguish between strings that differ only in their text
+properties. However, unlike @code{equal}, if either argument is not a
+string or symbol, @code{string=} signals an error.
@example
(string= "abc" "abc")
@result{} nil
@end example
-The function @code{string=} ignores the text properties of the two
-strings. When @code{equal} (@pxref{Equality Predicates}) compares two
-strings, it uses @code{string=}.
-
For technical reasons, a unibyte and a multibyte string are
@code{equal} if and only if they contain the same sequence of
character codes and all these codes are either in the range 0 through
@code{string-lessp} is another name for @code{string<}.
@end defun
+@defun string-prefix-p string1 string2 &optional ignore-case
+This function returns non-@code{nil} if @var{string1} is a prefix of
+@var{string2}; i.e., if @var{string2} starts with @var{string1}. If
+the optional argument @var{ignore-case} is non-@code{nil}, the
+comparison ignores case differences.
+@end defun
+
+@defun string-suffix-p suffix string &optional ignore-case
+This function returns non-@code{nil} if @var{suffix} is a suffix of
+@var{string}; i.e., if @var{string} ends with @var{suffix}. If the
+optional argument @var{ignore-case} is non-@code{nil}, the comparison
+ignores case differences.
+@end defun
+
@defun compare-strings string1 start1 end1 string2 start2 end2 &optional ignore-case
-This function compares the specified part of @var{string1} with the
+This function compares a specified part of @var{string1} with a
specified part of @var{string2}. The specified part of @var{string1}
-runs from index @var{start1} up to index @var{end1} (@code{nil} means
-the end of the string). The specified part of @var{string2} runs from
-index @var{start2} up to index @var{end2} (@code{nil} means the end of
-the string).
-
-The strings are both converted to multibyte for the comparison
-(@pxref{Text Representations}) so that a unibyte string and its
-conversion to multibyte are always regarded as equal. If
-@var{ignore-case} is non-@code{nil}, then case is ignored, so that
-upper case letters can be equal to lower case letters.
+runs from index @var{start1} (inclusive) up to index @var{end1}
+(exclusive); @code{nil} for @var{start1} means the start of the
+string, while @code{nil} for @var{end1} means the length of the
+string. Likewise, the specified part of @var{string2} runs from index
+@var{start2} up to index @var{end2}.
+
+The strings are compared by the numeric values of their characters.
+For instance, @var{str1} is considered ``smaller than'' @var{str2} if
+its first differing character has a smaller numeric value. If
+@var{ignore-case} is non-@code{nil}, characters are converted to
+lower-case before comparing them. Unibyte strings are converted to
+multibyte for comparison (@pxref{Text Representations}), so that a
+unibyte string and its conversion to multibyte are always regarded as
+equal.
If the specified portions of the two strings match, the value is
@code{t}. Otherwise, the value is an integer which indicates how many
-leading characters agree, and which string is less. Its absolute value
-is one plus the number of characters that agree at the beginning of the
-two strings. The sign is negative if @var{string1} (or its specified
-portion) is less.
+leading characters agree, and which string is less. Its absolute
+value is one plus the number of characters that agree at the beginning
+of the two strings. The sign is negative if @var{string1} (or its
+specified portion) is less.
@end defun
@defun assoc-string key alist &optional case-fold
@ref{Regexp Search}.
@node String Conversion
-@comment node-name, next, previous, up
@section Conversion of Characters and Strings
@cindex conversion of strings
@cindex integer to string
@cindex integer to decimal
This function returns a string consisting of the printed base-ten
-representation of @var{number}, which may be an integer or a floating
-point number. The returned value starts with a minus sign if the argument is
-negative.
+representation of @var{number}. The returned value starts with a
+minus sign if the argument is negative.
@example
(number-to-string 256)
This function returns the numeric value of the characters in
@var{string}. If @var{base} is non-@code{nil}, it must be an integer
between 2 and 16 (inclusive), and integers are converted in that base.
-If @var{base} is @code{nil}, then base ten is used. Floating point
+If @var{base} is @code{nil}, then base ten is used. Floating-point
conversion only works in base ten; we have not implemented other
-radices for floating point numbers, because that would be much more
+radices for floating-point numbers, because that would be much more
work and does not seem useful. If @var{string} looks like an integer
but its value is too large to fit into a Lisp integer,
-@code{string-to-number} returns a floating point result.
+@code{string-to-number} returns a floating-point result.
The parsing skips spaces and tabs at the beginning of @var{string},
then reads as much of @var{string} as it can interpret as a number in
the given base. (On some systems it ignores other whitespace at the
-beginning, not just spaces and tabs.) If the first character after
-the ignored whitespace is neither a digit in the given base, nor a
-plus or minus sign, nor the leading dot of a floating point number,
-this function returns 0.
+beginning, not just spaces and tabs.) If @var{string} cannot be
+interpreted as a number, this function returns 0.
@example
(string-to-number "256")
@end table
@node Formatting Strings
-@comment node-name, next, previous, up
@section Formatting Strings
@cindex formatting strings
@cindex strings, formatting them
Replace the specification with the character which is the value given.
@item %e
-Replace the specification with the exponential notation for a floating
-point number.
+Replace the specification with the exponential notation for a
+floating-point number.
@item %f
-Replace the specification with the decimal-point notation for a floating
-point number.
+Replace the specification with the decimal-point notation for a
+floating-point number.
@item %g
-Replace the specification with notation for a floating point number,
+Replace the specification with notation for a floating-point number,
using either exponential notation or decimal-point notation, whichever
is shorter.
characters.
@node Case Conversion
-@comment node-name, next, previous, up
@section Case Conversion in Lisp
@cindex upper case
@cindex lower case
@acronym{ASCII} characters; for example, in the Turkish language
environment, the @acronym{ASCII} character @samp{I} is downcased into
a Turkish ``dotless i''. This can interfere with code that requires
-ordinary ASCII case conversion, such as implementations of
+ordinary @acronym{ASCII} case conversion, such as implementations of
@acronym{ASCII}-based network protocols. In that case, use the
@code{with-case-table} macro with the variable @var{ascii-case-table},
which stores the unmodified case table for the @acronym{ASCII}
HCoop / bpt / emacs.git / blobdiff