ALLOCA=@ALLOCA@
LN_S=@LN_S@
CFLAGS=@CFLAGS@
+LDFLAGS=@LDFLAGS@
+CPPFLAGS=@CPPFLAGS@
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
YACC=@YACC@
datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
-# runs. These files are all architecture-independent. Right now, the
-# only such data is the locking directory; ${lockdir} is a
-# subdirectory of this.
+# runs. These files are all architecture-independent.
+# Right now, this is not used.
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# Tell make where to find source files; this is needed for the makefiles.
VPATH=@srcdir@
+# Where to find the application default.
+x_default_search_path=@x_default_search_path@
+
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# at once.
etcdir=@etcdir@
-# Where to create and expect the locking directory, where
-# the Emacs locking code keeps track of which files are
-# currently being edited.
-lockdir=@lockdir@
-
# Where to put executables to be run by Emacs rather than
# the user. This path usually includes the Emacs version
# and configuration name, so that multiple configurations
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
-SUBDIR = lib-src src
+SUBDIR = lib-src src leim
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
+SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
+# leim's makefile also knows how to install it, so we don't do that here.
# When installing the info files, we need to do special things to
# avoid nuking an existing dir file, so we don't do that here;
# instead, we have written out explicit code in the `install' targets.
paths-force: FRC
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ x_default_search_path=`echo ${x_default_search_path}`; \
sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
- -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
+ -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
${srcdir}/move-if-change paths.h.$$$$ src/paths.h
src: lib-src FRC
-lib-src: FRC
+lib-src: FRC src/config.stamp
.RECURSIVE: ${SUBDIR}
src/Makefile: src/Makefile.in config.status
./config.status
+src/config.stamp: src/config.in config.status
+ ./config.status
+ touch src/config.stamp
+
lib-src/Makefile: lib-src/Makefile.in config.status
./config.status
lwlib/Makefile: lwlib/Makefile.in config.status
./config.status
+leim/Makefile: leim/Makefile.in config.status
+ ./config.status
+
# ==================== Installation ====================
## If we let lib-src do its own installation, that means we
## source exists and is distinct from the destination.
### We do install-arch-indep first because
### the executable needs the Lisp files and DOC file to work properly.
-install: all install-arch-indep install-arch-dep blessmail
+install: all install-arch-indep install-arch-dep blessmail install-leim
@true
### Install the executables that were compiled specifically for this machine.
### Install the files that are machine-independent.
### Most of them come straight from the distribution;
### the exception is the DOC-* files, which are copied
-### from the build directory.
+## from the build directory.
-### Note that we copy DOC* and then delete DOC
-### as a workaround for a bug in tar on Ultrix 4.2.
+## Note that we copy DOC* and then delete DOC
+## as a workaround for a bug in tar on Ultrix 4.2.
install-arch-indep: mkdir
-set ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
chmod a+r ${man1dir}/$${page}${manext}); \
done
+### Install LEIM files. Although they are machine-independent, we
+### have separate target here instead of including it in
+### `install-arch-indep'. People who extracted LEIM files after they
+### insalled Emacs itself can install only LEIM files by this target.
+install-leim: leim/Makefile
+ cd leim; $(MAKE) install
+
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) INSTALL_STRIP=-s
### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
mkdir: FRC
- $(srcdir)/mkinstalldirs ${COPYDESTS} ${lockdir} ${infodir} ${man1dir} \
+ $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
${bindir} ${datadir} ${docdir} ${libexecdir} \
`echo ${locallisppath} | sed 's/:/ /g'`
- -chmod a+rwx ${lockdir}
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
-(cd man && $(MAKE) $(MFLAGS) mostlyclean)
+ (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
### `clean'
### Delete all files from the current directory that are normally
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
-(cd man && $(MAKE) $(MFLAGS) clean)
+ (cd leim; $(MAKE) $(MFLAGS) clean)
### `distclean'
### Delete all files from the current directory that are created by
top_distclean=\
rm -f config.status config.cache config.log ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
- (cd lock && (rm * || true))
+ (cd lock && (rm -f * || true))
distclean: FRC
(cd src; $(MAKE) $(MFLAGS) distclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
(cd man && $(MAKE) $(MFLAGS) distclean)
+ (cd leim; $(MAKE) $(MFLAGS) distclean)
${top_distclean}
### `maintainer-clean'
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
-(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
HCoop / bpt / emacs.git / blobdiff