;;; hilit-chg.el --- minor mode displaying buffer changes with special face
-;; Copyright (C) 1998 Free Software Foundation, Inc.
+;; Copyright (C) 1998, 2000, 2001, 2002, 2003, 2004,
+;; 2005, 2006, 2007 Free Software Foundation, Inc.
-;; Author: Richard Sharman <rsharman@magma.ca>
+;; Author: Richard Sharman <rsharman@pobox.com>
;; Keywords: faces
;; This file is part of GNU Emacs.
-;; This program is free software; you can redistribute it and/or modify
+;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 2, or (at your option)
+;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
-;; This program is distributed in the hope that it will be useful,
+;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING. If not, write to the
-;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-;; Boston, MA 02111-1307, USA.
-
+;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+;; Boston, MA 02110-1301, USA.
;;; Commentary:
;; Highlight Changes mode in passive state while you make your changes, toggle
;; it on to active mode to see them, then toggle it back off to avoid
;; distraction.
-;;
-;; When active, changes are displayed in `highlight-changes-face'. When
-;; text is deleted, the following character is displayed in
-;; `highlight-changes-delete-face' face.
+;;
+;; When active, changes are displayed in the `highlight-changes' face.
+;; When text is deleted, the following character is displayed in the
+;; `highlight-changes-delete' face.
;;
;;
;; You can "age" different sets of changes by using
-;; `highlight-changes-rotate-faces'. This rotates different through a series
+;; `highlight-changes-rotate-faces'. This rotates through a series
;; of different faces, so you can distinguish "new" changes from "older"
;; changes. You can customize these "rotated" faces in two ways. You can
;; either explicitly define each face by customizing
;; `highlight-changes-face-list'. If, however, the faces differ from
-;; `highlight-changes-face' only in the foreground colour, you can simply set
-;; `highlight-changes-colours'. If `highlight-changes-face-list' is nil when
+;; the `highlight-changes' face only in the foreground color, you can simply set
+;; `highlight-changes-colors'. If `highlight-changes-face-list' is nil when
;; the faces are required they will be constructed from
-;; `highlight-changes-colours'.
+;; `highlight-changes-colors'.
;;
;;
;; When a Highlight Changes mode is on (either active or passive) you can go
;;
;; You can also use the command highlight-compare-with-file to show changes
;; in this file compared with another file (typically the previous version
-;; of the file).
+;; of the file). The command highlight-compare-buffers can be used to
+;; compare two buffers.
;;
;;
;; There are currently three hooks run by `highlight-changes-mode':
;; modes. The variable
;; `highlight-changes-mode' contains the new
;; state (`active' or `passive'.)
-;;
;;
-;;
+;;
+;;
;; Example usage:
;; (defun my-highlight-changes-enable-hook ()
-;; (add-hook 'local-write-file-hooks 'highlight-changes-rotate-faces)
+;; (add-hook 'write-file-functions 'highlight-changes-rotate-faces nil t)
;; )
-;;
+;;
;; (defun my-highlight-changes-disable-hook ()
-;; (remove-hook 'local-write-file-hooks 'highlight-changes-rotate-faces)
+;; (remove-hook 'write-file-functions 'highlight-changes-rotate-faces t)
;; )
-;;
+;;
;; (add-hook 'highlight-changes-enable-hook 'my-highlight-changes-enable-hook)
;; (add-hook 'highlight-changes-disable-hook
;; 'my-highlight-changes-disable-hook)
-;; Explciit vs. Implicit
+;; Explicit vs. Implicit
;;
;; Normally, Highlight Changes mode is turned on explicitly in a buffer.
;;
;; If you prefer to have it automatically invoked you can do it as
;; follows.
-;;
+;;
;; 1. Most modes have a major-hook, typically called MODE-hook. You
-;; can use `add-hook' to call `highlight-changes-mode'.
+;; can use `add-hook' to call `highlight-changes-mode'.
;;
;; Example:
;; (add-hook 'c-mode-hook 'highlight-changes-mode)
;;
;; If you want to make it start up in passive mode (regardless of the
;; setting of highlight-changes-initial-state):
-;; (add-hook 'emacs-lisp-mode-hook
+;; (add-hook 'emacs-lisp-mode-hook
;; (lambda ()
;; (highlight-changes-mode 'passive)))
;;
;; However, this cannot be done for Fundamental mode for there is no
;; such hook.
;;
-;; 2. You can use the function `global-highlight-changes'
+;; 2. You can use the function `global-highlight-changes'
;;
;; This function, which is fashioned after the way `global-font-lock' works,
;; toggles on or off global Highlight Changes mode. When activated, it turns
-;; on Highlight Changes mode in all "suitable" existings buffers and will turn
+;; on Highlight Changes mode in all "suitable" existing buffers and will turn
;; it on in new "suitable" buffers to be created.
-;;
+;;
;; A buffer's "suitability" is determined by variable
-;; `highlight-changes-global-modes', as follows. If the variable is
+;; `highlight-changes-global-modes', as follows. If the variable is
;; * nil -- then no buffers are suitable;
;; * a function -- this function is called and the result is used. As
-;; an example, if the value is 'buffer-file-name then all buffers
+;; an example, if the value is `buffer-file-name' then all buffers
;; who are visiting files are suitable, but others (like dired
;; buffers) are not;
-;; * a list -- then if the buufer is suitable iff its mode is in the
-;; list, exccept if the first element is nil in which case the test
+;; * a list -- then the buffer is suitable if its mode is in the
+;; list, except if the first element is `not', in which case the test
;; is reversed (i.e. it is a list of unsuitable modes).
-;; * Otherwise, the buffer is suitable if its name does not begin with
+;; * Otherwise, the buffer is suitable if its name does not begin with
;; ` ' or `*' and if `buffer-file-name' returns true.
;;
;; highlight-changes-remove-highlight
;; highlight-changes-rotate-faces
;; highlight-compare-with-file
+;; highlight-compare-buffers
-;;
+;;
;; You can automatically rotate faces when the buffer is saved;
;; see function `highlight-changes-rotate-faces' for how to do this.
;;
;;; Bugs:
;; - the next-change and previous-change functions are too literal;
-;; they should find the next "real" change, in other words treat
+;; they should find the next "real" change, in other words treat
;; consecutive changes as one.
-;;; To do (maybe), notes, ...
+;;; To do (maybe), notes, ...
;; - having different faces for deletion and non-deletion: is it
;; really worth the hassle?
;;; History:
-;; R Sharman (rsharman@magma.ca) Feb 1998:
+;; R Sharman (rsharman@pobox.com) Feb 1998:
;; - initial release as change-mode.
;; Jari Aalto <jari.aalto@ntc.nokia.com> Mar 1998
-;; - fixes for byte compile errors
+;; - fixes for byte compile errors
;; - use eval-and-compile for autoload
;; Marijn Ros <J.M.Ros@fys.ruu.nl> Mar 98
;; - suggested turning it on by default
;; - global mode and various stuff added
;; - Changed to use overlays
;; August 98
-;; - renmaed to Highlight Changes mode.
-
+;; - renamed to Highlight Changes mode.
+;; Dec 2003
+;; - Use require for ediff stuff
+;; - Added highlight-compare-buffers
;;; Code:
;; ====================== Customization =======================
(defgroup highlight-changes nil
"Highlight Changes mode."
+ :version "20.4"
:group 'faces)
;; Defaults for face: red foreground, no change to background,
;; and underlined if a change is because of a deletion.
-;; Note: underlining is helpful in that is shows up changes in white space.
+;; Note: underlining is helpful in that it shows up changes in white space.
;; However, having it set for non-delete changes can be annoying because all
;; indentation on inserts gets underlined (which can look pretty ugly!).
-(defface highlight-changes-face
- '((((class color)) (:foreground "red" ))
+(defface highlight-changes
+ '((((min-colors 88) (class color)) (:foreground "red1"))
+ (((class color)) (:foreground "red" ))
(t (:inverse-video t)))
"Face used for highlighting changes."
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
+;; backward-compatibility alias
+(put 'highlight-changes-face 'face-alias 'highlight-changes)
;; This looks pretty ugly, actually. Maybe the underline should be removed.
-(defface highlight-changes-delete-face
- '((((class color)) (:foreground "red" :underline t))
+(defface highlight-changes-delete
+ '((((min-colors 88) (class color)) (:foreground "red1" :underline t))
+ (((class color)) (:foreground "red" :underline t))
(t (:inverse-video t)))
"Face used for highlighting deletions."
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
+;; backward-compatibility alias
+(put 'highlight-changes-delete-face 'face-alias 'highlight-changes-delete)
-;; A (not very good) default list of colours to rotate through.
+;; A (not very good) default list of colors to rotate through.
;;
-(defcustom highlight-changes-colours
+(defcustom highlight-changes-colors
(if (eq (frame-parameter nil 'background-mode) 'light)
;; defaults for light background:
'( "magenta" "blue" "darkgreen" "chocolate" "sienna4" "NavyBlue")
;; defaults for dark background:
'("yellow" "magenta" "blue" "maroon" "firebrick" "green4" "DarkOrchid"))
- "*Colours used by `highlight-changes-rotate-faces'.
-The newest rotated change will be displayed in the first element of this list,
+ "*Colors used by `highlight-changes-rotate-faces'.
+The newest rotated change will be displayed in the first element of this list,
the next older will be in the second element etc.
-This list is used if `highlight-changes-face-list' is nil, otherwise that
-variable overrides this list. If you only care about foreground
-colours then use this, if you want fancier faces then set
+This list is used if `highlight-changes-face-list' is nil, otherwise that
+variable overrides this list. If you only care about foreground
+colors then use this, if you want fancier faces then set
`highlight-changes-face-list'."
- :type '(repeat color)
- :group 'highlight-changes
- )
-
+ :type '(repeat color)
+ :group 'highlight-changes)
+
+(define-obsolete-variable-alias 'highlight-changes-colours
+ 'highlight-changes-colors "22.1")
+
-;; If you invoke highlight-changes-mode with no argument, should it start in
+;; If you invoke highlight-changes-mode with no argument, should it start in
;; active or passive mode?
;;
(defcustom highlight-changes-initial-state 'active
- "*What state (active or passive) `highlight-changes' should start in.
-This is used when `highlight-changes' is called with no argument.
+ "*What state (active or passive) Highlight Changes mode should start in.
+This is used when `highlight-changes-mode' is called with no argument.
This variable must be set to one of the symbols `active' or `passive'."
:type '(choice (const :tag "Active" active)
(const :tag "Passive" passive))
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
(defcustom highlight-changes-global-initial-state 'passive
- "*What state `global-highlight-changes' should start in.
+ "*What state global Highlight Changes mode should start in.
This is used if `global-highlight-changes' is called with no argument.
-This variable must be set to either `active' or `passive'"
+This variable must be set to either `active' or `passive'."
:type '(choice (const :tag "Active" active)
(const :tag "Passive" passive))
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
;; The strings displayed in the mode-line for the minor mode:
-(defcustom highlight-changes-active-string nil
+(defcustom highlight-changes-active-string " +Chg"
"*The string used when Highlight Changes mode is in the active state.
-This should be set to nil if no indication is desired, or to
+This should be set to nil if no indication is desired, or to
a string with a leading space."
:type '(choice string
(const :tag "None" nil))
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
-(defcustom highlight-changes-passive-string " Chg"
+(defcustom highlight-changes-passive-string " -Chg"
"*The string used when Highlight Changes mode is in the passive state.
-This should be set to nil if no indication is desired, or to
+This should be set to nil if no indication is desired, or to
a string with a leading space."
:type '(choice string
(const :tag "None" nil))
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
(defcustom highlight-changes-global-modes t
"*Determine whether a buffer is suitable for global Highlight Changes mode.
-A function means that function is called: if it returns non-nil the
-buffer is suitable.
+A function means call that function to decide: if it returns non-nil,
+the buffer is suitable.
-A list is a list of modes for which it is suitable, or a list whose
-first element is 'not followed by modes which are not suitable.
+A list means the elements are major modes suitable for Highlight
+Changes mode, or a list whose first element is `not' followed by major
+modes which are not suitable.
-t means the buffer is suitable if its name does not begin with ` ' nor
-`*' and the buffer has a filename.
+A value of t means the buffer is suitable if it is visiting a file and
+its name does not begin with ` ' or `*'.
-nil means no buffers are suitable for `global-highlight-changes'
-(effectively disabling the mode).
+A value of nil means no buffers are suitable for `global-highlight-changes'
+\(effectively disabling the mode).
-Examples:
+Example:
(c-mode c++-mode)
means that Highlight Changes mode is turned on for buffers in C and C++
modes only."
- :type '(choice
+ :type '(choice
(const :tag "all non-special buffers visiting files" t)
(set :menu-tag "specific modes" :tag "modes"
:value (not)
:value buffer-file-name)
(const :tag "none" nil)
)
- :group 'highlight-changes
- )
-
+ :group 'highlight-changes)
(defvar global-highlight-changes nil)
(defcustom highlight-changes-global-changes-existing-buffers nil
- "*If non-nil toggling global Highlight Changes mode affects existing buffers.
-Normally, `global-highlight-changes' means affects only new buffers (to be
-created). However, if highlight-changes-global-changes-existing-buffers
-is non-nil then turning on `global-highlight-changes' will turn on
-highlight-changes-mode in suitable buffers and turning the mode off will
+ "*If non-nil, toggling global Highlight Changes mode affects existing buffers.
+Normally, `global-highlight-changes' affects only new buffers (to be
+created). However, if `highlight-changes-global-changes-existing-buffers'
+is non-nil, then turning on `global-highlight-changes' will turn on
+Highlight Changes mode in suitable buffers, and turning the mode off will
remove it from existing buffers."
:type 'boolean
:group 'highlight-changes)
(defun hilit-chg-cust-fix-changes-face-list (w wc &optional event)
;; When customization function `highlight-changes-face-list' inserts a new
- ;; face it uses the default face. We don't want the user to modify this
- ;; face, so we rename the faces in the list on an insert. The rename is
+ ;; face it uses the default face. We don't want the user to modify this
+ ;; face, so we rename the faces in the list on an insert. The rename is
;; actually done by copying the faces so user-defined faces still remain
;; in the same order.
;; The notifying the parent is needed because without it changes to the
)
(while p
(setq old-name (car p))
- (setq new-name (intern (format "highlight-changes-face-%d" n)))
+ (setq new-name (intern (format "highlight-changes-%d" n)))
(if (eq old-name new-name)
nil
;; A new face has been inserted: we don't want to modify the
- ;; default face so copy it. Better, though, (I think) is to
+ ;; default face so copy it. Better, though, (I think) is to
;; make a new face have the same attributes as
- ;; highlight-changes-face .
+ ;; the `highlight-changes' face.
(if (eq old-name 'default)
- (copy-face 'highlight-changes-face new-name)
+ (copy-face 'highlight-changes new-name)
(copy-face old-name new-name)
))
- (setq new-list (append (list new-name) new-list))
+ (setq new-list (append (list new-name) new-list))
(setq n (1- n))
(setq p (cdr p)))
(if (equal new-list (widget-value w))
))
(let ((parent (widget-get w :parent)))
(when parent
- (widget-apply parent :notify w event)))
- )
+ (widget-apply parent :notify w event))))
(defcustom highlight-changes-face-list nil
- "*A list of faces used when rotatating changes.
+ "*A list of faces used when rotating changes.
Normally the variable is initialized to nil and the list is created from
-`highlight-changes-colours' when needed. However, you can set this variable
+`highlight-changes-colors' when needed. However, you can set this variable
to any list of faces. You will have to do this if you want faces which
-don't just differ from `highlight-changes-face' by the foreground colour.
+don't just differ from the `highlight-changes' face by the foreground color.
Otherwise, this list will be constructed when needed from
-`highlight-changes-colours'."
+`highlight-changes-colors'."
:type '(choice
- (repeat
+ (repeat
:notify hilit-chg-cust-fix-changes-face-list
face )
- (const :tag "Derive from highlight-changes-colours" nil)
+ (const :tag "Derive from highlight-changes-colors" nil)
)
- :group 'highlight-changes
- )
+ :group 'highlight-changes)
;; ========================================================================
(make-variable-buffer-local 'hilit-chg-string)
-
-(eval-and-compile
- ;; For highlight-compare-with-file
- (defvar ediff-number-of-differences)
- (autoload 'ediff-setup "ediff")
- (autoload 'ediff-with-current-buffer "ediff")
- (autoload 'ediff-really-quit "ediff")
- (autoload 'ediff-make-fine-diffs "ediff")
- (autoload 'ediff-get-fine-diff-vector "ediff")
- (autoload 'ediff-get-difference "ediff")
- )
-
+(require 'ediff-init)
+(require 'ediff-util)
;;; Functions...
-(defun hilit-chg-map-changes (func &optional start-position end-position)
+(defun hilit-chg-map-changes (func &optional start-position end-position)
"Call function FUNC for each region used by Highlight Changes mode."
;; if start-position is nil, (point-min) is used
;; if end-position is nil, (point-max) is used
(setq end (text-property-not-all start limit 'hilit-chg prop))
(if prop
(funcall func prop start (or end limit)))
- (setq start end)
- )))
+ (setq start end))))
(defun hilit-chg-display-changes (&optional beg end)
"Display face information for Highlight Changes mode.
-An overlay containing a change face is added, from the information
-in the text property of type change.
+An overlay containing a change face is added from the information
+in the text property of type `hilit-chg'.
-This is the opposite of hilit-chg-hide-changes."
+This is the opposite of `hilit-chg-hide-changes'."
(hilit-chg-map-changes 'hilit-chg-make-ov beg end))
(defun hilit-chg-make-ov (prop start end)
+ (or prop
+ (error "hilit-chg-make-ov: prop is nil"))
;; for the region make change overlays corresponding to
;; the text property 'hilit-chg
(let ((ov (make-overlay start end))
face)
- (or prop
- (error "hilit-chg-make-ov: prop is nil"))
(if (eq prop 'hilit-chg-delete)
- (setq face 'highlight-changes-delete-face)
+ (setq face 'highlight-changes-delete)
(setq face (nth 1 (member prop hilit-chg-list))))
(if face
(progn
- ;; We must mark the face, that is the purpose of the overlay
+ ;; We must mark the face, that is the purpose of the overlay
(overlay-put ov 'face face)
;; I don't think we need to set evaporate since we should
;; be controlling them!
;; of our overlays (so we don't delete someone else's).
(overlay-put ov 'hilit-chg t)
)
- (error "hilit-chg-make-ov: no face for prop: %s" prop)
- )
- ))
+ (error "hilit-chg-make-ov: no face for prop: %s" prop))))
(defun hilit-chg-hide-changes (&optional beg end)
"Remove face information for Highlight Changes mode.
-The overlay containing the face is removed, but the text property
+The overlay containing the face is removed, but the text property
containing the change information is retained.
-This is the opposite of hilit-chg-display-changes."
+This is the opposite of `hilit-chg-display-changes'."
(let ((start (or beg (point-min)))
(limit (or end (point-max)))
p ov)
;; don't delete the overlay if it isn't ours!
(if (overlay-get (car p) 'hilit-chg)
(delete-overlay (car p)))
- (setq p (cdr p))
- )))
+ (setq p (cdr p)))))
(defun hilit-chg-fixup (beg end)
- "Fix change overlays in region beg .. end.
+ "Fix change overlays in region between BEG and END.
Ensure the overlays agree with the changes as determined from
-the text properties of type `hilit-chg' ."
+the text properties of type `hilit-chg'."
;; Remove or alter overlays in region beg..end
- (let (p ov ov-start ov-end
- props q)
- (setq p (overlays-in beg end))
+ (let (ov-start ov-end props q)
;; temp for debugging:
;; (or (eq highlight-changes-mode 'active)
;; (error "hilit-chg-fixup called but Highlight Changes mode not active"))
- (while p
- (setq ov (car p))
- (setq ov-start (overlay-start ov))
- (setq ov-end (overlay-end ov))
- (if (< ov-start beg)
- (progn
- (move-overlay ov ov-start beg)
+ (dolist (ov (overlays-in beg end))
+ ;; Don't alter overlays that are not ours.
+ (when (overlay-get ov 'hilit-chg)
+ (let ((ov-start (overlay-start ov))
+ (ov-end (overlay-end ov)))
+ (if (< ov-start beg)
+ (progn
+ (move-overlay ov ov-start beg)
+ (if (> ov-end end)
+ (progn
+ (setq props (overlay-properties ov))
+ (setq ov (make-overlay end ov-end))
+ (while props
+ (overlay-put ov (car props)(car (cdr props)))
+ (setq props (cdr (cdr props)))))))
(if (> ov-end end)
- (progn
- (setq props (overlay-properties ov))
- (setq ov (make-overlay end ov-end))
- (while props
- (overlay-put ov (car props)(car (cdr props)))
- (setq props (cdr (cdr props))))
- )
- )
- )
- (if (> ov-end end)
- (move-overlay ov end ov-end)
- (delete-overlay ov)
- ))
- (setq p (cdr p)))
- (hilit-chg-display-changes beg end)
- ))
-
-
-
-
-
+ (move-overlay ov end ov-end)
+ (delete-overlay ov))))))
+ (hilit-chg-display-changes beg end)))
;;;###autoload
-(defun highlight-changes-remove-highlight (beg end)
- "Remove the change face from the region.
+(defun highlight-changes-remove-highlight (beg end)
+ "Remove the change face from the region between BEG and END.
This allows you to manually remove highlighting from uninteresting changes."
(interactive "r")
(let ((after-change-functions nil))
- (remove-text-properties beg end '(hilit-chg nil))
+ (remove-text-properties beg end '(hilit-chg nil))
(hilit-chg-fixup beg end)))
-(defun hilit-chg-set-face-on-change (beg end leng-before
- &optional no-proerty-change)
+(defun hilit-chg-set-face-on-change (beg end leng-before
+ &optional no-property-change)
"Record changes and optionally display them in a distinctive face.
`hilit-chg-set' adds this function to the `after-change-functions' hook."
;;
;;
;; We do NOT want to simply do this if this is an undo command, because
;; otherwise an undone change shows up as changed. While the properties
- ;; are automatically restored by undo, we must fixup the overlay.
+ ;; are automatically restored by undo, we must fix up the overlay.
(save-match-data
(let ((beg-decr 1) (end-incr 1)
(type 'hilit-chg)
;; deletion
(progn
;; The eolp and bolp tests are a kludge! But they prevent
- ;; rather nasty looking displays when deleting text at the end
- ;; of line, such as normal corrections as one is typing and
- ;; immediately makes a corrections, and when deleting first
+ ;; rather nasty looking displays when deleting text at the end
+ ;; of line, such as normal corrections as one is typing and
+ ;; immediately makes a correction, and when deleting first
;; character of a line.
;;; (if (= leng-before 1)
;;; (if (eolp)
(setq end (min (+ end end-incr) (point-max)))
(setq type 'hilit-chg-delete))
;; Not a deletion.
- ;; Most of the time the following is not necessary, but
+ ;; Most of the time the following is not necessary, but
;; if the current text was marked as a deletion then
;; the old overlay is still in effect, so if we add some
- ;; text then remove the deletion marking, but set it to
+ ;; text then remove the deletion marking, but set it to
;; changed otherwise its highlighting disappears.
(if (eq (get-text-property end 'hilit-chg) 'hilit-chg-delete)
(progn
(put-text-property end (+ end 1) 'hilit-chg 'hilit-chg)
(if (eq highlight-changes-mode 'active)
(hilit-chg-fixup beg (+ end 1))))))
- (unless no-proerty-change
+ (unless no-property-change
(put-text-property beg end 'hilit-chg type))
- (if (or (eq highlight-changes-mode 'active) no-proerty-change)
- (hilit-chg-make-ov type beg end))
- ))))
-
-
-
-
+ (if (or (eq highlight-changes-mode 'active) no-property-change)
+ (hilit-chg-make-ov type beg end))))))
(defun hilit-chg-set (value)
"Turn on Highlight Changes mode for this buffer."
;; mode is passive
(setq hilit-chg-string highlight-changes-passive-string)
(or buffer-read-only
- (hilit-chg-hide-changes))
- )
+ (hilit-chg-hide-changes)))
(force-mode-line-update)
- (make-local-hook 'after-change-functions)
- (add-hook 'after-change-functions 'hilit-chg-set-face-on-change nil t)
- )
+ (add-hook 'after-change-functions 'hilit-chg-set-face-on-change nil t))
(defun hilit-chg-clear ()
"Remove Highlight Changes mode for this buffer.
(remove-hook 'after-change-functions 'hilit-chg-set-face-on-change t)
(let ((after-change-functions nil))
(hilit-chg-hide-changes)
- (hilit-chg-map-changes
+ (hilit-chg-map-changes
'(lambda (prop start stop)
(remove-text-properties start stop '(hilit-chg nil))))
)
(setq highlight-changes-mode nil)
(force-mode-line-update)
;; If we type: C-u -1 M-x highlight-changes-mode
- ;; we want to turn it off, but hilit-chg-post-command-hook
+ ;; we want to turn it off, but hilit-chg-post-command-hook
;; runs and that turns it back on!
- (remove-hook 'post-command-hook 'hilit-chg-post-command-hook)
- ))
+ (remove-hook 'post-command-hook 'hilit-chg-post-command-hook)))
;;;###autoload
(defun highlight-changes-mode (&optional arg)
"Toggle (or initially set) Highlight Changes mode.
-Without an argument,
- if Highlight Changes mode is not enabled, then enable it (to either active
- or passive as determined by variable highlight-changes-initial-state);
- otherwise, toggle between active and passive states.
+Without an argument:
+ If Highlight Changes mode is not enabled, then enable it (in either active
+ or passive state as determined by the variable
+ `highlight-changes-initial-state'); otherwise, toggle between active
+ and passive state.
-With an argument,
- if just C-u or a positive argument, set state to active;
- with a zero argument, set state to passive;
- with a negative argument, disable Highlight Changes mode completely.
+With an argument ARG:
+ If ARG is positive, set state to active;
+ If ARG is zero, set state to passive;
+ If ARG is negative, disable Highlight Changes mode completely.
-Active state - means changes are shown in a distinctive face.
+Active state - means changes are shown in a distinctive face.
Passive state - means changes are kept and new ones recorded but are
not displayed in a different face.
Functions:
\\[highlight-changes-next-change] - move point to beginning of next change
-\\[highlight-changes-previous-change] - move to beginning of previous change
+\\[highlight-changes-previous-change] - move to beginning of previous change
\\[highlight-compare-with-file] - mark text as changed by comparing this
buffer with the contents of a file
\\[highlight-changes-remove-highlight] - remove the change face from the region
\\[highlight-changes-rotate-faces] - rotate different \"ages\" of changes \
-through
- various faces.
-
+through
+ various faces
Hook variables:
-highlight-changes-enable-hook - when Highlight Changes mode enabled.
-highlight-changes-toggle-hook - when entering active or passive state
-highlight-changes-disable-hook - when turning off Highlight Changes mode.
-"
+`highlight-changes-enable-hook' - when enabling Highlight Changes mode
+`highlight-changes-toggle-hook' - when entering active or passive state
+`highlight-changes-disable-hook' - when turning off Highlight Changes mode"
(interactive "P")
- (if window-system
+ (if (or (display-color-p)
+ (and (fboundp 'x-display-grayscale-p) (x-display-grayscale-p)))
(let ((was-on highlight-changes-mode)
(new-highlight-changes-mode
(cond
;; an argument is given
((eq arg 'active)
'active)
- ((eq arg 'passive)
+ ((eq arg 'passive)
'passive)
((> (prefix-numeric-value arg) 0)
'active)
((< (prefix-numeric-value arg) 0)
nil)
(t
- 'passive)
- )))
+ 'passive))))
(if new-highlight-changes-mode
;; mode is turned on -- but may be passive
(progn
(run-hooks 'highlight-changes-toggle-hook))
;; mode is turned off
(run-hooks 'highlight-changes-disable-hook)
- (hilit-chg-clear))
- )
- (message "Highlight Changes mode only works when using a window system"))
- )
-
-
+ (hilit-chg-clear)))
+ (message "Highlight Changes mode requires color or grayscale display")))
;;;###autoload
(defun highlight-changes-next-change ()
(message "no previous change")))
(message "This buffer is not in Highlight Changes mode.")))
-
;; ========================================================================
-
(defun hilit-chg-make-list (&optional force)
- "Construct hilit-chg-list and highlight-changes-face-list."
- ;; Constructs highlight-changes-face-list if necessary,
+ "Construct `hilit-chg-list' and `highlight-changes-face-list'."
+ ;; Constructs highlight-changes-face-list if necessary,
;; and hilit-chg-list always:
;; Maybe this should always be called when rotating a face
;; so we pick up any changes?
(if (or (null highlight-changes-face-list) ; Don't do it if it
force) ; already exists unless FORCE non-nil.
- (let ((p highlight-changes-colours)
+ (let ((p highlight-changes-colors)
(n 1) name)
(setq highlight-changes-face-list nil)
(while p
- (setq name (intern (format "highlight-changes-face-%d" n)))
- (copy-face 'highlight-changes-face name)
+ (setq name (intern (format "highlight-changes-%d" n)))
+ (copy-face 'highlight-changes name)
(set-face-foreground name (car p))
- (setq highlight-changes-face-list
+ (setq highlight-changes-face-list
(append highlight-changes-face-list (list name)))
(setq p (cdr p))
(setq n (1+ n)))))
- (setq hilit-chg-list (list 'hilit-chg 'highlight-changes-face))
+ (setq hilit-chg-list (list 'hilit-chg 'highlight-changes))
(let ((p highlight-changes-face-list)
- (n 1)
+ (n 1)
last-category last-face)
(while p
(setq last-category (intern (format "change-%d" n)))
- ;; (setq last-face (intern (format "highlight-changes-face-%d" n)))
+ ;; (setq last-face (intern (format "highlight-changes-%d" n)))
(setq last-face (car p))
(setq hilit-chg-list
(append hilit-chg-list
(setq n (1+ n)))
(setq hilit-chg-list
(append hilit-chg-list
- (list last-category last-face)))
- ))
-
+ (list last-category last-face)))))
(defun hilit-chg-bump-change (prop start end)
- "Increment (age) the Highlight Changes mode text property of type change."
+ "Increment (age) the Highlight Changes mode text property."
(let ( new-prop )
(if (eq prop 'hilit-chg-delete)
(setq new-prop (nth 2 hilit-chg-list))
- (setq new-prop (nth 2 (member prop hilit-chg-list)))
- )
+ (setq new-prop (nth 2 (member prop hilit-chg-list))))
(if prop
(put-text-property start end 'hilit-chg new-prop)
- (message "%d-%d unknown property %s not changed" start end prop)
- )
- ))
+ (message "%d-%d unknown property %s not changed" start end prop))))
;;;###autoload
(defun highlight-changes-rotate-faces ()
"Rotate the faces used by Highlight Changes mode.
-Current changes will be display in the face described by the first element
-of highlight-changes-face-list, those (older) changes will be shown in the
+Current changes are displayed in the face described by the first element
+of `highlight-changes-face-list', one level older changes are shown in
face described by the second element, and so on. Very old changes remain
shown in the last face in the list.
-You can automatically rotate colours when the buffer is saved
-by adding this to local-write-file-hooks, by evaling (in the
-buffer to be saved):
- (add-hook 'local-write-file-hooks 'highlight-changes-rotate-faces)
-"
+You can automatically rotate colors when the buffer is saved by adding
+this function to `write-file-functions' as a buffer-local value. To do
+this, eval the following in the buffer to be saved:
+
+ \(add-hook 'write-file-functions 'highlight-changes-rotate-faces nil t)"
(interactive)
;; If not in active mode do nothing but don't complain because this
;; may be bound to a hook.
- (if (eq highlight-changes-mode 'active)
- (let ((after-change-functions nil))
- ;; ensure hilit-chg-list is made and up to date
- (hilit-chg-make-list)
- ;; remove our existing overlays
- (hilit-chg-hide-changes)
- ;; for each change text property, increment it
- (hilit-chg-map-changes 'hilit-chg-bump-change)
- ;; and display them all if active
- (if (eq highlight-changes-mode 'active)
- (hilit-chg-display-changes))
- ))
- ;; This always returns nil so it is safe to use in
- ;; local-write-file-hook
+ (when (eq highlight-changes-mode 'active)
+ (let ((modified (buffer-modified-p))
+ (inhibit-modification-hooks t))
+ ;; The `modified' related code tries to combine two goals: (1) Record the
+ ;; rotation in `buffer-undo-list' and (2) avoid setting the modified flag
+ ;; of the current buffer due to the rotation. We do this by inserting (in
+ ;; `buffer-undo-list') entries restoring buffer-modified-p to nil before
+ ;; and after the entry for the rotation.
+ (unless modified
+ ;; Install the "before" entry.
+ (setq buffer-undo-list
+ (cons '(apply restore-buffer-modified-p nil)
+ buffer-undo-list)))
+ (unwind-protect
+ (progn
+ ;; ensure hilit-chg-list is made and up to date
+ (hilit-chg-make-list)
+ ;; remove our existing overlays
+ (hilit-chg-hide-changes)
+ ;; for each change text property, increment it
+ (hilit-chg-map-changes 'hilit-chg-bump-change)
+ ;; and display them all if active
+ (if (eq highlight-changes-mode 'active)
+ (hilit-chg-display-changes)))
+ (unless modified
+ ;; Install the "after" entry.
+ (setq buffer-undo-list
+ (cons '(apply restore-buffer-modified-p nil)
+ buffer-undo-list))
+
+ (restore-buffer-modified-p nil)))))
+ ;; This always returns nil so it is safe to use in write-file-functions
nil)
-
;; ========================================================================
-;; Comparing with an existing file.
-;; This uses ediff to find the differences.
+;; Comparing buffers/files
+;; These use ediff to find the differences.
+
+(defun highlight-markup-buffers
+ (buf-a file-a buf-b file-b &optional markup-a-only)
+ "Get differences between two buffers and set highlight changes.
+Both buffers are done unless optional parameter MARKUP-A-ONLY
+is non-nil."
+ (save-window-excursion
+ (let* (change-info
+ change-a change-b
+ a-start a-end len-a
+ b-start b-end len-b
+ (bufa-modified (buffer-modified-p buf-a))
+ (bufb-modified (buffer-modified-p buf-b))
+ (buf-a-read-only (with-current-buffer buf-a buffer-read-only))
+ (buf-b-read-only (with-current-buffer buf-b buffer-read-only))
+ temp-a temp-b)
+ (if (and file-a bufa-modified)
+ (if (y-or-n-p (format "Save buffer %s? " buf-a))
+ (with-current-buffer buf-a
+ (save-buffer)
+ (setq bufa-modified (buffer-modified-p buf-a)))
+ (setq file-a nil)))
+ (or file-a
+ (setq temp-a (setq file-a (ediff-make-temp-file buf-a nil))))
+
+ (if (and file-b bufb-modified)
+ (if (y-or-n-p (format "Save buffer %s? " buf-b))
+ (with-current-buffer buf-b
+ (save-buffer)
+ (setq bufb-modified (buffer-modified-p buf-b)))
+ (setq file-b nil)))
+ (or file-b
+ (setq temp-b (setq file-b (ediff-make-temp-file buf-b nil))))
+ (set-buffer buf-a)
+ (highlight-changes-mode 'active)
+ (or markup-a-only (with-current-buffer buf-b
+ (highlight-changes-mode 'active)))
+ (setq change-info (hilit-chg-get-diff-info buf-a file-a buf-b file-b))
+
+
+ (setq change-a (car change-info))
+ (setq change-b (car (cdr change-info)))
+
+ (hilit-chg-make-list)
+ (while change-a
+ (setq a-start (nth 0 (car change-a)))
+ (setq a-end (nth 1 (car change-a)))
+ (setq b-start (nth 0 (car change-b)))
+ (setq b-end (nth 1 (car change-b)))
+ (setq len-a (- a-end a-start))
+ (setq len-b (- b-end b-start))
+ (set-buffer buf-a)
+ (hilit-chg-set-face-on-change a-start a-end len-b buf-a-read-only)
+ (or markup-a-only
+ (with-current-buffer buf-b
+ (hilit-chg-set-face-on-change b-start b-end len-a
+ buf-b-read-only)
+ ))
+ (setq change-a (cdr change-a))
+ (setq change-b (cdr change-b)))
+ (or bufa-modified
+ (with-current-buffer buf-a (set-buffer-modified-p nil)))
+ (or bufb-modified
+ (with-current-buffer buf-b (set-buffer-modified-p nil)))
+ (if temp-a
+ (delete-file temp-a))
+ (if temp-b
+ (delete-file temp-b)))
+ ))
+
+;;;###autoload
+(defun highlight-compare-buffers (buf-a buf-b)
+"Compare two buffers and highlight the differences.
+
+The default is the current buffer and the one in the next window.
+
+If either buffer is modified and is visiting a file, you are prompted
+to save the file.
+
+Unless the buffer is unmodified and visiting a file, the buffer is
+written to a temporary file for comparison.
+
+If a buffer is read-only, differences will be highlighted but no property
+changes are made, so \\[highlight-changes-next-change] and
+\\[highlight-changes-previous-change] will not work."
+ (interactive
+ (list
+ (get-buffer (read-buffer "buffer-a " (current-buffer) t))
+ (get-buffer
+ (read-buffer "buffer-b "
+ (window-buffer (next-window (selected-window))) t))))
+ (let ((file-a (buffer-file-name buf-a))
+ (file-b (buffer-file-name buf-b)))
+ (highlight-markup-buffers buf-a file-a buf-b file-b)
+ ))
;;;###autoload
(defun highlight-compare-with-file (file-b)
"Compare this buffer with a file, and highlight differences.
-The current buffer must be an unmodified buffer visiting a file,
-and not in read-only mode.
-
-If the backup filename exists, it is used as the default
-when called interactively.
+If the buffer has a backup filename, it is used as the default when
+this function is called interactively.
-If a buffer is visiting the file being compared against, it also will
-have its differences highlighted. Otherwise, the file is read in
-temporarily but the buffer is deleted.
+If the current buffer is visiting the file being compared against, it
+also will have its differences highlighted. Otherwise, the file is
+read in temporarily but the buffer is deleted.
-If a buffer is read-only, differences will be highlighted but no property
-changes made, so \\[highlight-changes-next-change] and
+If the buffer is read-only, differences will be highlighted but no property
+changes are made, so \\[highlight-changes-next-change] and
\\[highlight-changes-previous-change] will not work."
(interactive (list
(read-file-name
"" ;; directory
nil ;; default
'yes ;; must exist
- (let ((f (make-backup-file-name
- (or (buffer-file-name (current-buffer))
- (error "no file for this buffer")))))
- (if (file-exists-p f) f ""))
- )))
-
+ (let ((f (buffer-file-name (current-buffer))))
+ (if f
+ (progn
+ (setq f (make-backup-file-name f))
+ (or (file-exists-p f)
+ (setq f nil)))
+ )
+ f))))
(let* ((buf-a (current-buffer))
- (buf-a-read-only buffer-read-only)
- (orig-pos (point))
(file-a (buffer-file-name))
(existing-buf (get-file-buffer file-b))
(buf-b (or existing-buf
(find-file-noselect file-b)))
- (buf-b-read-only (with-current-buffer buf-b buffer-read-only))
- xy xx yy p q
- a-start a-end len-a
- b-start b-end len-b
- )
-
- ;; We use the fact that the buffer is not marked modified at the
- ;; end where we clear its modified status
- (if (buffer-modified-p buf-a)
- (if (y-or-n-p (format "OK to save %s? " file-a))
- (save-buffer buf-a)
- (error "Buffer must be saved before comparing with a file.")))
- (if (and existing-buf (buffer-modified-p buf-b))
- (if (y-or-n-p (format "OK to save %s? " file-b))
- (save-buffer buf-b)
- (error "Cannot compare with a file in an unsaved buffer.")))
- (highlight-changes-mode 'active)
- (if existing-buf (with-current-buffer buf-b
- (highlight-changes-mode 'active)))
- (save-window-excursion
- (setq xy (hilit-chg-get-diff-info buf-a file-a buf-b file-b)))
- (setq xx (car xy))
- (setq p xx)
- (setq yy (car (cdr xy)))
- (setq q yy)
- (hilit-chg-make-list)
- (while p
- (setq a-start (nth 0 (car p)))
- (setq a-end (nth 1 (car p)))
- (setq b-start (nth 0 (car q)))
- (setq b-end (nth 1 (car q)))
- (setq len-a (- a-end a-start))
- (setq len-b (- b-end b-start))
- (set-buffer buf-a)
- (hilit-chg-set-face-on-change a-start a-end len-b buf-a-read-only)
- (set-buffer-modified-p nil)
- (goto-char orig-pos)
- (if existing-buf
- (with-current-buffer buf-b
- (hilit-chg-set-face-on-change b-start b-end len-a
- buf-b-read-only )
- ))
- (setq p (cdr p))
- (setq q (cdr q))
- )
- (if existing-buf
- (set-buffer-modified-p nil)
+ (buf-b-read-only (with-current-buffer buf-b buffer-read-only)))
+ (highlight-markup-buffers buf-a file-a buf-b file-b (not existing-buf))
+ (unless existing-buf
(kill-buffer buf-b))
))
(defun hilit-chg-get-diff-list-hk ()
- ;; x and y are dynamically bound by hilit-chg-get-diff-info
+ ;; x and y are dynamically bound by hilit-chg-get-diff-info
;; which calls this function as a hook
(defvar x) ;; placate the byte-compiler
(defvar y)
- (setq e (current-buffer))
+ (setq e (current-buffer))
(let ((n 0) extent p va vb a b)
- (setq x nil y nil) ;; x and y are bound by hilit-chg-get-diff-info
+ (setq x nil y nil) ;; x and y are bound by hilit-chg-get-diff-info
(while (< n ediff-number-of-differences)
(ediff-make-fine-diffs n)
(setq va (ediff-get-fine-diff-vector n 'A))
;; va is a vector if there are fine differences
(if va
(setq a (append va nil))
- ;; if not, get the unrefined difference
+ ;; if not, get the unrefined difference
(setq va (ediff-get-difference n 'A))
- (setq a (list (elt va 0)))
- )
+ (setq a (list (elt va 0))))
;; a list a list
(setq p a)
(while p
(setq extent (list (overlay-start (car p))
(overlay-end (car p))))
(setq p (cdr p))
- (setq x (append x (list extent) ))
- );; while p
+ (setq x (append x (list extent) )));; while p
;;
(setq vb (ediff-get-fine-diff-vector n 'B))
;; vb is a vector
(if vb
(setq b (append vb nil))
- ;; if not, get the unrefined difference
+ ;; if not, get the unrefined difference
(setq vb (ediff-get-difference n 'B))
- (setq b (list (elt vb 0)))
- )
+ (setq b (list (elt vb 0))))
;; b list a list
(setq p b)
(while p
(setq extent (list (overlay-start (car p))
(overlay-end (car p))))
(setq p (cdr p))
- (setq y (append y (list extent) ))
- );; while p
- ;;
- (setq n (1+ n))
- );; while
+ (setq y (append y (list extent) )))
+ (setq n (1+ n)));; while
;; ediff-quit doesn't work here.
;; No point in returning a value, since this is a hook function.
))
;; ======================= automatic stuff ==============
-;; Global Highlight Changes mode is modelled after Global Font-lock mode.
+;; Global Highlight Changes mode is modeled after Global Font-lock mode.
;; Three hooks are used to gain control. When Global Changes Mode is
-;; enabled, `find-file-hooks' and `change-major-mode-hook' are set.
-;; `find-file-hooks' is called when visiting a file, the new mode is
+;; enabled, `find-file-hook' and `change-major-mode-hook' are set.
+;; `find-file-hook' is called when visiting a file, the new mode is
;; known at this time.
;; `change-major-mode-hook' is called when a buffer is changing mode.
;; This could be because of finding a file in which case
-;; `find-file-hooks' has already been called and has done its work.
+;; `find-file-hook' has already been called and has done its work.
;; However, it also catches the case where a new mode is being set by
;; the user. However, it is called from `kill-all-variables' and at
-;; this time the mode is the old mode, which is not what we want.
-;; So, our function temporarily sets `post-command-hook' which will
+;; this time the mode is the old mode, which is not what we want.
+;; So, our function temporarily sets `post-command-hook' which will
;; be called after the buffer has been completely set up (with the new
;; mode). It then removes the `post-command-hook'.
;; One other wrinkle - every M-x command runs the `change-major-mode-hook'
(defun hilit-chg-major-mode-hook ()
- (add-hook 'post-command-hook 'hilit-chg-post-command-hook)
- )
+ (add-hook 'post-command-hook 'hilit-chg-post-command-hook))
(defun hilit-chg-post-command-hook ()
;; This is called after changing a major mode, but also after each
- ;; M-x command, in which case the current buffer is a minibuffer.
- ;; In that case, do not act on it here, but don't turn it off
- ;; either, we will get called here again soon-after.
- ;; Also, don't enable it for other special buffers.
+ ;; M-x command, in which case the current buffer is a minibuffer.
+ ;; In that case, do not act on it here, but don't turn it off
+ ;; either, we will get called here again soon-after.
+ ;; Also, don't enable it for other special buffers.
(if (string-match "^[ *]" (buffer-name))
nil ;; (message "ignoring this post-command-hook")
(remove-hook 'post-command-hook 'hilit-chg-post-command-hook)
- ;; The following check isn't necessary, since
+ ;; The following check isn't necessary, since
;; hilit-chg-turn-on-maybe makes this check too.
(or highlight-changes-mode ;; don't turn it on if it already is
- (hilit-chg-turn-on-maybe highlight-changes-global-initial-state))
- ))
+ (hilit-chg-turn-on-maybe highlight-changes-global-initial-state))))
(defun hilit-chg-check-global ()
;; This is called from the find file hook.
(hilit-chg-turn-on-maybe highlight-changes-global-initial-state))
-
;;;###autoload
(defun global-highlight-changes (&optional arg)
"Turn on or off global Highlight Changes mode.
When called interactively:
- if no prefix, toggle global Highlight Changes mode on or off
- if called with a positive prefix (or just C-u) turn it on in active mode
-- if called with a zero prefix turn it on in passive mode
+- if called with a zero prefix turn it on in passive mode
- if called with a negative prefix turn it off
When called from a program:
- if ARG is nil or omitted, turn it off
-- if ARG is 'active, turn it on in active mode
-- if ARG is 'passive, turn it on in passive mode
-- otherwise just turn it on
+- if ARG is `active', turn it on in active mode
+- if ARG is `passive', turn it on in passive mode
+- otherwise just turn it on
When global Highlight Changes mode is enabled, Highlight Changes mode is turned
on for future \"suitable\" buffers (and for \"suitable\" existing buffers if
variable `highlight-changes-global-changes-existing-buffers' is non-nil).
-\"Suitablity\" is determined by variable `highlight-changes-global-modes'."
+\"Suitability\" is determined by variable `highlight-changes-global-modes'."
- (interactive
+ (interactive
(list
(cond
((null current-prefix-arg)
'passive)
;; negative interactive arg - turn it off
(t
- (setq global-highlight-changes nil)
+ (setq global-highlight-changes nil)
nil))))
(if arg
(progn
(if (eq arg 'active)
(setq highlight-changes-global-initial-state 'active)
- (if (eq arg 'passive)
+ (if (eq arg 'passive)
(setq highlight-changes-global-initial-state 'passive)))
(setq global-highlight-changes t)
- (message "turning ON Global Highlight Changes mode in %s state"
+ (message "Turning ON Global Highlight Changes mode in %s state"
highlight-changes-global-initial-state)
- (add-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook)
- (add-hook 'find-file-hooks 'hilit-chg-check-global)
+ ;; FIXME: Not sure what this was intended to do. --Stef
+ ;; (add-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook)
+ (add-hook 'find-file-hook 'hilit-chg-check-global)
(if highlight-changes-global-changes-existing-buffers
- (hilit-chg-update-all-buffers
- highlight-changes-global-initial-state))
- )
- (message "turning OFF global Highlight Changes mode")
- (remove-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook)
- (remove-hook 'find-file-hooks 'hilit-chg-check-global)
- (remove-hook 'post-command-hook
- 'hilit-chg-post-command-hook)
- (remove-hook 'find-file-hooks 'hilit-chg-check-global)
- (if highlight-changes-global-changes-existing-buffers
- (hilit-chg-update-all-buffers nil))
- )
- )
-
-
+ (hilit-chg-update-all-buffers
+ highlight-changes-global-initial-state)))
+ (message "Turning OFF global Highlight Changes mode")
+ ;; FIXME: Not sure what this was intended to do. --Stef
+ ;; (remove-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook)
+ (remove-hook 'post-command-hook 'hilit-chg-post-command-hook)
+ (remove-hook 'find-file-hook 'hilit-chg-check-global)
+ (if highlight-changes-global-changes-existing-buffers
+ (hilit-chg-update-all-buffers nil))))
(defun hilit-chg-turn-on-maybe (value)
"Turn on Highlight Changes mode if it is appropriate for this buffer.
A buffer is appropriate for Highlight Changes mode if all these are true:
-- the buffer is not a special buffer (one whose name begins with
- `*' or ` ')
-- the buffer's mode is suitable as per variable highlight-changes-global-modes
+- the buffer is not a special buffer (one whose name begins with
+ `*' or ` '),
+- the buffer's mode is suitable as per variable
+ `highlight-changes-global-modes',
- Highlight Changes mode is not already on for this buffer.
-This function is called from hilit-chg-update-all-buffers
-from `global-highlight-changes' when turning on global Highlight Changes mode.
-"
+This function is called from `hilit-chg-update-all-buffers' or
+from `global-highlight-changes' when turning on global Highlight Changes mode."
(or highlight-changes-mode ; do nothing if already on
(if
(cond
(not (memq major-mode (cdr highlight-changes-global-modes)))
(memq major-mode highlight-changes-global-modes)))
(t
- (and
- (not (string-match "^[ *]" (buffer-name)))
- (buffer-file-name))
- ))
+ (and
+ (not (string-match "^[ *]" (buffer-name)))
+ (buffer-file-name))))
(progn
(hilit-chg-set value)
- (run-hooks 'highlight-changes-enable-hook)))
- ))
-
+ (run-hooks 'highlight-changes-enable-hook)))))
+
(defun hilit-chg-turn-off-maybe ()
(if highlight-changes-mode
(hilit-chg-clear))))
-
(defun hilit-chg-update-all-buffers (value)
- (mapcar
+ (mapc
(function (lambda (buffer)
(with-current-buffer buffer
(if value
(hilit-chg-turn-on-maybe value)
(hilit-chg-turn-off-maybe))
)))
- (buffer-list)))
+ (buffer-list))
+ nil)
+
+;;;; Desktop support.
+
+;; Called by `desktop-create-buffer' to restore `highlight-changes-mode'.
+(defun hilit-chg-desktop-restore (desktop-buffer-locals)
+ (highlight-changes-mode
+ (or (cdr (assq 'highlight-changes-mode desktop-buffer-locals)) 1)))
+
+(add-to-list 'desktop-minor-mode-handlers
+ '(highlight-changes-mode . hilit-chg-desktop-restore))
+
+(add-to-list 'desktop-locals-to-save 'highlight-changes-mode)
;; ===================== debug ==================
;; For debug & test use:
;; )
;; beg end
;; ))
-;;
+;;
;; ================== end of debug ===============
-
(provide 'hilit-chg)
+;; arch-tag: de00301d-5bad-44da-aa82-e0e010b0c463
;;; hilit-chg.el ends here
HCoop / bpt / emacs.git / blobdiff