-;;; gud.el --- Grand Unified Debugger mode for gdb, sdb, or dbx under Emacs
+;;; gud.el --- Grand Unified Debugger mode for gdb, sdb, dbx, or xdb under Emacs
;; Author: Eric S. Raymond <esr@snark.thyrsus.com>
-;; Version: 1.1
+;; Maintainer: FSF
;; Keywords: unix, tools
-;; Copyright (C) 1992 Free Software Foundation, Inc.
+;; Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
;; This file is part of GNU Emacs.
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING. If not, write to
-;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+;; along with GNU Emacs; see the file COPYING. If not, write to the
+;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+;; Boston, MA 02111-1307, USA.
;;; Commentary:
;; It was later rewritten by rms. Some ideas were due to Masanobu.
;; Grand Unification (sdb/dbx support) by Eric S. Raymond <esr@thyrsus.com>
;; The overloading code was then rewritten by Barry Warsaw <bwarsaw@cen.com>,
-;; who also hacked the mode to use comint.el.
-
-;; This code will not work under Emacs 18. It relies on Emacs 19's
-;; minor-mode-keymap support and the find-tag-noselect entry point of etags.
-
-;;; Change Log:
-
-;; Version 1.1: ESR 6 Apr 1993
-;; * Facility to accept and parse command-line switches other than the
-;; filename added.
-;; * System V Release 4 support added.
-;; * Can now set temporary breakpoints in sdb.
-;; * A GUD minor mode using the 19 minor-mode-keymap facilities is now
-;; enabled in visited C buffers.
-;; * Command bindings are now automatically the same in gud-minor-mode
-;; as they are in the GUD buffer itself, and use ^XX as a common
-;; prefix (for compatibility with electric-debug).
-;; * There is a new command for printing the C expression around point.
-
-;; Version 1.0: ESR
-;; * Created.
+;; who also hacked the mode to use comint.el. Shane Hartman <shane@spr.com>
+;; added support for xdb (HPUX debugger). Rick Sladkey <jrs@world.std.com>
+;; wrote the GDB command completion code. Dave Love <d.love@dl.ac.uk>
+;; added the IRIX kluge, re-implemented the Mips-ish variant and added
+;; a menu. Brian D. Carlstrom <bdc@ai.mit.edu> combined the IRIX kluge with
+;; the gud-xdb-directories hack producing gud-dbx-directories.
;;; Code:
(require 'etags)
;; ======================================================================
-;; minor-mode machinery for C buffers visited by GUD
-
-(defvar gud-key-prefix "\C-xX"
- "Prefix of all GUD minor-mode commands valid in C buffers.")
-
-(defvar gud-minor-mode nil)
-(or (assq 'gud-minor-mode minor-mode-alist)
- (setq minor-mode-alist
- (cons '(gud-minor-mode " GUD") minor-mode-alist)))
-
-(defvar gud-mode-map nil)
-(if gud-mode-map
- nil
- (setq gud-mode-map (make-sparse-keymap))
- (define-key gud-mode-map gud-key-prefix (make-sparse-keymap))
- (define-key gud-mode-map (concat gud-key-prefix "\C-l") 'gud-refresh)
- )
-
-(or (assq 'gud-minor-mode minor-mode-map-alist)
- (setq minor-mode-map-alist
- (cons
- (cons 'gud-minor-mode gud-mode-map)
- minor-mode-map-alist)))
-
-(defun gud-minor-mode (&optional enable)
- "GUD minor mode is enabled in C buffers visited due to a GUD stop at
-breakpoint. All GUD-specific commands defined in GUD major mode will work,
-but they get their current file and current line number from the context of
-this buffer."
- (interactive "P")
- (setq gud-minor-mode
- (if (null enable) (not gud-minor-mode)
- (> (prefix-numeric-value enable) 0)))
-)
-
-;; ======================================================================
-;; the overloading mechanism
-
-(defun gud-overload-functions (gud-overload-alist)
- "Overload functions defined in GUD-OVERLOAD-ALIST.
-This association list has elements of the form
- (ORIGINAL-FUNCTION-NAME OVERLOAD-FUNCTION)"
- (mapcar
- (function (lambda (p) (fset (car p) (symbol-function (cdr p)))))
- gud-overload-alist))
-
-(defun gud-debugger-startup (file args)
- (error "GUD not properly entered."))
-
-(defun gud-marker-filter (str)
- (error "GUD not properly entered."))
-
-(defun gud-find-file (f)
- (error "GUD not properly entered."))
-
+;; GUD commands must be visible in C buffers visited by GUD
+
+(defvar gud-key-prefix "\C-x\C-a"
+ "Prefix of all GUD commands valid in C buffers.")
+
+(global-set-key (concat gud-key-prefix "\C-l") 'gud-refresh)
+(define-key ctl-x-map " " 'gud-break) ;; backward compatibility hack
+
+(defvar gud-marker-filter nil)
+(put 'gud-marker-filter 'permanent-local t)
+(defvar gud-find-file nil)
+(put 'gud-find-file 'permanent-local t)
+
+(defun gud-marker-filter (&rest args)
+ (apply gud-marker-filter args))
+
+(defun gud-find-file (file)
+ ;; Don't get confused by double slashes in the name that comes from GDB.
+ (while (string-match "//+" file)
+ (setq file (replace-match "/" t t file)))
+ (funcall gud-find-file file))
+
+;; Keymap definitions for menu bar entries common to all debuggers and
+;; slots for debugger-dependent ones in sensible places. (Defined here
+;; before use.)
+(defvar gud-menu-map (make-sparse-keymap "Gud") nil)
+(define-key gud-menu-map [refresh] '("Refresh" . gud-refresh))
+(define-key gud-menu-map [remove] '("Remove Breakpoint" . gud-remove))
+(define-key gud-menu-map [tbreak] nil) ; gdb, sdb and xdb
+(define-key gud-menu-map [break] '("Set Breakpoint" . gud-break))
+(define-key gud-menu-map [up] nil) ; gdb, dbx, and xdb
+(define-key gud-menu-map [down] nil) ; gdb, dbx, and xdb
+(define-key gud-menu-map [print] '("Print Expression" . gud-print))
+(define-key gud-menu-map [finish] nil) ; gdb or xdb
+(define-key gud-menu-map [stepi] '("Step Instruction" . gud-stepi))
+(define-key gud-menu-map [step] '("Step Line" . gud-step))
+(define-key gud-menu-map [next] '("Next Line" . gud-next))
+(define-key gud-menu-map [cont] '("Continue" . gud-cont))
+\f
;; ======================================================================
;; command definition
;; A macro call like (gud-def FUNC NAME KEY DOC) expands to a form
;; which defines FUNC to send the command NAME to the debugger, gives
;; it the docstring DOC, and binds that function to KEY in the GUD
-;; major mode. The function is also bound in the GUD minor-mode
-;; keymap. If a numeric prefix argument is given to FUNC, it gets
-;; sent after NAME.
+;; major mode. The function is also bound in the global keymap with the
+;; GUD prefix.
(defmacro gud-def (func cmd key &optional doc)
"Define FUNC to be a command sending STR and bound to KEY, with
optional doc string DOC. Certain %-escapes in the string arguments
are interpreted specially if present. These are:
- %f name of current source file.
+ %f name (without directory) of current source file.
+ %d directory of current source file.
%l number of current source line
%e text of the C lvalue or function-call expression surrounding point.
%a text of the hexadecimal address surrounding point
%p prefix argument to the command (if any) as a number
- The `current' source file is the file of the current buffer (if we're in a
-C file with gud-minor-mode active) or the source file current at the last
-break or step (if we're in the GUD buffer).
- The `current' line is that of the current buffer (if we're in a source
-file with gud-minor-mode active) or the source line number at the last
-break or step (if we're in the GUD buffer)."
+ The `current' source file is the file of the current buffer (if
+we're in a C file) or the source file current at the last break or
+step (if we're in the GUD buffer).
+ The `current' line is that of the current buffer (if we're in a
+source file) or the source line number at the last break or step (if
+we're in the GUD buffer)."
(list 'progn
(list 'defun func '(arg)
(or doc "")
(list 'gud-call cmd 'arg))
(if key
(list 'define-key
- 'gud-mode-map
- (concat gud-key-prefix key)
+ '(current-local-map)
+ (concat "\C-c" key)
+ (list 'quote func)))
+ (if key
+ (list 'global-set-key
+ (list 'concat 'gud-key-prefix key)
(list 'quote func)))))
;; Where gud-display-frame should put the debugging arrow. This is
;; indications of the current program counter.
(defvar gud-last-frame nil)
+;; Used by gud-refresh, which should cause gud-display-frame to redisplay
+;; the last frame, even if it's been called before and gud-last-frame has
+;; been set to nil.
+(defvar gud-last-last-frame nil)
+
;; All debugger-specific information is collected here.
;; Here's how it works, in case you ever need to add a debugger to the mode.
;;
;;
;;<name>
;; comint-prompt-regexp
-;; gud-<name>-debugger-startup
+;; gud-<name>-massage-args
;; gud-<name>-marker-filter
;; gud-<name>-find-file
;;
-;; The job of the startup-command method is to fire up a copy of the debugger,
-;; given a list of debugger arguments.
+;; The job of the massage-args method is to modify the given list of
+;; debugger arguments before running the debugger.
;;
;; The job of the marker-filter method is to detect file/line markers in
;; strings and set the global gud-last-frame to indicate what display
;; action (if any) should be triggered by the marker. Note that only
-;; whetever the method *returns* is displayed in the buffer; thus, you
+;; whatever the method *returns* is displayed in the buffer; thus, you
;; can filter the debugger's output, interpreting some and passing on
;; the rest.
;;
;; The job of the find-file method is to visit and return the buffer indicated
;; by the car of gud-tag-frame. This may be a file name, a tag name, or
-;; something else.
-
+;; something else. It would be good if it also copied the Gud menubar entry.
+\f
;; ======================================================================
;; gdb functions
-(defun gud-gdb-debugger-startup (file args)
- (apply 'make-comint (concat "gud-" file) "gdb" nil "-fullname" args))
+;;; History of argument lists passed to gdb.
+(defvar gud-gdb-history nil)
+
+(defun gud-gdb-massage-args (file args)
+ (cons "-fullname" args))
+
+(defvar gud-gdb-marker-regexp
+ (concat "\032\032\\([^" path-separator "\n]*\\)" path-separator
+ "\\([0-9]*\\)" path-separator ".*\n"))
+
+;; There's no guarantee that Emacs will hand the filter the entire
+;; marker at once; it could be broken up across several strings. We
+;; might even receive a big chunk with several markers in it. If we
+;; receive a chunk of text which looks like it might contain the
+;; beginning of a marker, we save it here between calls to the
+;; filter.
+(defvar gud-marker-acc "")
+(make-variable-buffer-local 'gud-marker-acc)
(defun gud-gdb-marker-filter (string)
- (if (string-match "\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n" string)
- (progn
- (setq gud-last-frame
- (cons
- (substring string (match-beginning 1) (match-end 1))
- (string-to-int
- (substring string (match-beginning 2) (match-end 2)))))
- ;; this computation means the ^Z^Z-initiated marker in the
- ;; input string is never emitted.
- (concat
- (substring string 0 (match-beginning 0))
- (substring string (match-end 0))
- ))
- string))
+ (setq gud-marker-acc (concat gud-marker-acc string))
+ (let ((output ""))
+
+ ;; Process all the complete markers in this chunk.
+ (while (string-match gud-gdb-marker-regexp gud-marker-acc)
+ (setq
+
+ ;; Extract the frame position from the marker.
+ gud-last-frame
+ (cons (substring gud-marker-acc (match-beginning 1) (match-end 1))
+ (string-to-int (substring gud-marker-acc
+ (match-beginning 2)
+ (match-end 2))))
+
+ ;; Append any text before the marker to the output we're going
+ ;; to return - we don't include the marker in this text.
+ output (concat output
+ (substring gud-marker-acc 0 (match-beginning 0)))
+
+ ;; Set the accumulator to the remaining text.
+ gud-marker-acc (substring gud-marker-acc (match-end 0))))
+
+ ;; Does the remaining text look like it might end with the
+ ;; beginning of another marker? If it does, then keep it in
+ ;; gud-marker-acc until we receive the rest of it. Since we
+ ;; know the full marker regexp above failed, it's pretty simple to
+ ;; test for marker starts.
+ (if (string-match "\032.*\\'" gud-marker-acc)
+ (progn
+ ;; Everything before the potential marker start can be output.
+ (setq output (concat output (substring gud-marker-acc
+ 0 (match-beginning 0))))
+
+ ;; Everything after, we save, to combine with later input.
+ (setq gud-marker-acc
+ (substring gud-marker-acc (match-beginning 0))))
+
+ (setq output (concat output gud-marker-acc)
+ gud-marker-acc ""))
+
+ output))
+
+(defun gud-new-keymap (map)
+ "Return a new keymap which inherits from MAP and has name `Gud'."
+ (nconc (make-sparse-keymap "Gud") map))
+
+(defun gud-make-debug-menu ()
+ "Make sure the current local map has a [menu-bar debug] submap.
+If it doesn't, replace it with a new map that inherits it,
+and create such a submap in that new map."
+ (if (and (current-local-map)
+ (lookup-key (current-local-map) [menu-bar debug]))
+ nil
+ (use-local-map (gud-new-keymap (current-local-map)))
+ (define-key (current-local-map) [menu-bar debug]
+ (cons "Gud" (gud-new-keymap gud-menu-map)))))
(defun gud-gdb-find-file (f)
- (find-file-noselect f))
+ (save-excursion
+ (let ((buf (find-file-noselect f)))
+ (set-buffer buf)
+ (gud-make-debug-menu)
+ (local-set-key [menu-bar debug tbreak]
+ '("Temporary Breakpoint" . gud-tbreak))
+ (local-set-key [menu-bar debug finish] '("Finish Function" . gud-finish))
+ (local-set-key [menu-bar debug up] '("Up Stack" . gud-up))
+ (local-set-key [menu-bar debug down] '("Down Stack" . gud-down))
+ buf)))
+
+(defvar gdb-minibuffer-local-map nil
+ "Keymap for minibuffer prompting of gdb startup command.")
+(if gdb-minibuffer-local-map
+ ()
+ (setq gdb-minibuffer-local-map (copy-keymap minibuffer-local-map))
+ (define-key
+ gdb-minibuffer-local-map "\C-i" 'comint-dynamic-complete-filename))
;;;###autoload
-(defun gdb (args)
+(defun gdb (command-line)
"Run gdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
- (interactive "sRun gdb (like this): gdb ")
- (gud-overload-functions '((gud-debugger-startup . gud-gdb-debugger-startup)
- (gud-marker-filter . gud-gdb-marker-filter)
- (gud-find-file . gud-gdb-find-file)
- ))
-
- (gud-def gud-break "break %f:%l" "b" "Set breakpoint at current line.")
- (gud-def gud-tbreak "tbreak %f:%l" "t" "Set breakpoint at current line.")
- (gud-def gud-remove "clear %l" "d" "Remove breakpoint at current line")
- (gud-def gud-step "step %p" "s" "Step one source line with display.")
- (gud-def gud-stepi "stepi %p" "i" "Step one instruction with display.")
- (gud-def gud-next "next %p" "n" "Step one line (skip functions).")
- (gud-def gud-cont "cont" "r" "Continue with display.")
- (gud-def gud-finish "finish" "f" "Finish executing current function.")
+ (interactive
+ (list (read-from-minibuffer "Run gdb (like this): "
+ (if (consp gud-gdb-history)
+ (car gud-gdb-history)
+ "gdb ")
+ gdb-minibuffer-local-map nil
+ '(gud-gdb-history . 1))))
+
+ (gud-common-init command-line 'gud-gdb-massage-args
+ 'gud-gdb-marker-filter 'gud-gdb-find-file)
+
+ (gud-def gud-break "break %f:%l" "\C-b" "Set breakpoint at current line.")
+ (gud-def gud-tbreak "tbreak %f:%l" "\C-t" "Set temporary breakpoint at current line.")
+ (gud-def gud-remove "clear %f:%l" "\C-d" "Remove breakpoint at current line")
+ (gud-def gud-step "step %p" "\C-s" "Step one source line with display.")
+ (gud-def gud-stepi "stepi %p" "\C-i" "Step one instruction with display.")
+ (gud-def gud-next "next %p" "\C-n" "Step one line (skip functions).")
+ (gud-def gud-cont "cont" "\C-r" "Continue with display.")
+ (gud-def gud-finish "finish" "\C-f" "Finish executing current function.")
(gud-def gud-up "up %p" "<" "Up N stack frames (numeric arg).")
(gud-def gud-down "down %p" ">" "Down N stack frames (numeric arg).")
- (gud-def gud-print "print %e" "p" "Evaluate C expression at point.")
-
- (gud-common-init args)
+ (gud-def gud-print "print %e" "\C-p" "Evaluate C expression at point.")
+ (local-set-key "\C-i" 'gud-gdb-complete-command)
+ (local-set-key [menu-bar debug tbreak] '("Temporary Breakpoint" . gud-tbreak))
+ (local-set-key [menu-bar debug finish] '("Finish Function" . gud-finish))
+ (local-set-key [menu-bar debug up] '("Up Stack" . gud-up))
+ (local-set-key [menu-bar debug down] '("Down Stack" . gud-down))
(setq comint-prompt-regexp "^(.*gdb[+]?) *")
+ (setq paragraph-start comint-prompt-regexp)
(run-hooks 'gdb-mode-hook)
)
+;; One of the nice features of GDB is its impressive support for
+;; context-sensitive command completion. We preserve that feature
+;; in the GUD buffer by using a GDB command designed just for Emacs.
+
+;; The completion process filter indicates when it is finished.
+(defvar gud-gdb-complete-in-progress)
+;; Since output may arrive in fragments we accumulate partials strings here.
+(defvar gud-gdb-complete-string)
+
+;; We need to know how much of the completion to chop off.
+(defvar gud-gdb-complete-break)
+
+;; The completion list is constructed by the process filter.
+(defvar gud-gdb-complete-list)
+
+(defvar gud-comint-buffer nil)
+
+(defun gud-gdb-complete-command ()
+ "Perform completion on the GDB command preceding point.
+This is implemented using the GDB `complete' command which isn't
+available with older versions of GDB."
+ (interactive)
+ (let* ((end (point))
+ (command (save-excursion
+ (beginning-of-line)
+ (and (looking-at comint-prompt-regexp)
+ (goto-char (match-end 0)))
+ (buffer-substring (point) end)))
+ command-word)
+ ;; Find the word break. This match will always succeed.
+ (string-match "\\(\\`\\| \\)\\([^ ]*\\)\\'" command)
+ (setq gud-gdb-complete-break (match-beginning 2)
+ command-word (substring command gud-gdb-complete-break))
+ ;; Temporarily install our filter function.
+ (let ((gud-marker-filter 'gud-gdb-complete-filter))
+ ;; Issue the command to GDB.
+ (gud-basic-call (concat "complete " command))
+ (setq gud-gdb-complete-in-progress t
+ gud-gdb-complete-string nil
+ gud-gdb-complete-list nil)
+ ;; Slurp the output.
+ (while gud-gdb-complete-in-progress
+ (accept-process-output (get-buffer-process gud-comint-buffer))))
+ ;; Protect against old versions of GDB.
+ (and gud-gdb-complete-list
+ (string-match "^Undefined command: \"complete\""
+ (car gud-gdb-complete-list))
+ (error "This version of GDB doesn't support the `complete' command."))
+ ;; Sort the list like readline.
+ (setq gud-gdb-complete-list
+ (sort gud-gdb-complete-list (function string-lessp)))
+ ;; Remove duplicates.
+ (let ((first gud-gdb-complete-list)
+ (second (cdr gud-gdb-complete-list)))
+ (while second
+ (if (string-equal (car first) (car second))
+ (setcdr first (setq second (cdr second)))
+ (setq first second
+ second (cdr second)))))
+ ;; Add a trailing single quote if there is a unique completion
+ ;; and it contains an odd number of unquoted single quotes.
+ (and (= (length gud-gdb-complete-list) 1)
+ (let ((str (car gud-gdb-complete-list))
+ (pos 0)
+ (count 0))
+ (while (string-match "\\([^'\\]\\|\\\\'\\)*'" str pos)
+ (setq count (1+ count)
+ pos (match-end 0)))
+ (and (= (mod count 2) 1)
+ (setq gud-gdb-complete-list (list (concat str "'"))))))
+ ;; Let comint handle the rest.
+ (comint-dynamic-simple-complete command-word gud-gdb-complete-list)))
+
+;; The completion process filter is installed temporarily to slurp the
+;; output of GDB up to the next prompt and build the completion list.
+(defun gud-gdb-complete-filter (string)
+ (setq string (concat gud-gdb-complete-string string))
+ (while (string-match "\n" string)
+ (setq gud-gdb-complete-list
+ (cons (substring string gud-gdb-complete-break (match-beginning 0))
+ gud-gdb-complete-list))
+ (setq string (substring string (match-end 0))))
+ (if (string-match comint-prompt-regexp string)
+ (progn
+ (setq gud-gdb-complete-in-progress nil)
+ string)
+ (progn
+ (setq gud-gdb-complete-string string)
+ "")))
+
+\f
;; ======================================================================
;; sdb functions
+;;; History of argument lists passed to sdb.
+(defvar gud-sdb-history nil)
+
(defvar gud-sdb-needs-tags (not (file-exists-p "/var"))
"If nil, we're on a System V Release 4 and don't need the tags hack.")
(defvar gud-sdb-lastfile nil)
-(defun gud-sdb-debugger-startup (file args)
- (apply 'make-comint (concat "gud-" file) "sdb" nil args))
+(defun gud-sdb-massage-args (file args) args)
(defun gud-sdb-marker-filter (string)
- (cond
- ;; System V Release 3.2 uses this format
- ((string-match "\\(^0x\\w* in \\|^\\|\n\\)\\([^:\n]*\\):\\([0-9]*\\):.*\n"
- string)
- (setq gud-last-frame
- (cons
- (substring string (match-beginning 2) (match-end 2))
- (string-to-int
- (substring string (match-beginning 3) (match-end 3))))))
- ;; System V Release 4.0
- ((string-match "^\\(BREAKPOINT\\|STEPPED\\) process [0-9]+ function [^ ]+ in \\(.+\\)\n"
- string)
- (setq gud-sdb-lastfile
- (substring string (match-beginning 2) (match-end 2))))
- ((and gud-sdb-lastfile (string-match "^\\([0-9]+\\):" string))
- (setq gud-last-frame
- (cons
- gud-sdb-lastfile
- (string-to-int
- (substring string (match-beginning 1) (match-end 1))))))
- (t
- (setq gud-sdb-lastfile nil)))
+ (setq gud-marker-acc
+ (if gud-marker-acc (concat gud-marker-acc string) string))
+ (let (start)
+ ;; Process all complete markers in this chunk
+ (while
+ (cond
+ ;; System V Release 3.2 uses this format
+ ((string-match "\\(^\\|\n\\)\\*?\\(0x\\w* in \\)?\\([^:\n]*\\):\\([0-9]*\\):.*\n"
+ gud-marker-acc start)
+ (setq gud-last-frame
+ (cons
+ (substring gud-marker-acc (match-beginning 3) (match-end 3))
+ (string-to-int
+ (substring gud-marker-acc (match-beginning 4) (match-end 4))))))
+ ;; System V Release 4.0 quite often clumps two lines together
+ ((string-match "^\\(BREAKPOINT\\|STEPPED\\) process [0-9]+ function [^ ]+ in \\(.+\\)\n\\([0-9]+\\):"
+ gud-marker-acc start)
+ (setq gud-sdb-lastfile
+ (substring gud-marker-acc (match-beginning 2) (match-end 2)))
+ (setq gud-last-frame
+ (cons
+ gud-sdb-lastfile
+ (string-to-int
+ (substring gud-marker-acc (match-beginning 3) (match-end 3))))))
+ ;; System V Release 4.0
+ ((string-match "^\\(BREAKPOINT\\|STEPPED\\) process [0-9]+ function [^ ]+ in \\(.+\\)\n"
+ gud-marker-acc start)
+ (setq gud-sdb-lastfile
+ (substring gud-marker-acc (match-beginning 2) (match-end 2))))
+ ((and gud-sdb-lastfile (string-match "^\\([0-9]+\\):"
+ gud-marker-acc start))
+ (setq gud-last-frame
+ (cons
+ gud-sdb-lastfile
+ (string-to-int
+ (substring gud-marker-acc (match-beginning 1) (match-end 1))))))
+ (t
+ (setq gud-sdb-lastfile nil)))
+ (setq start (match-end 0)))
+
+ ;; Search for the last incomplete line in this chunk
+ (while (string-match "\n" gud-marker-acc start)
+ (setq start (match-end 0)))
+
+ ;; If we have an incomplete line, store it in gud-marker-acc.
+ (setq gud-marker-acc (substring gud-marker-acc (or start 0))))
string)
(defun gud-sdb-find-file (f)
- (if gud-sdb-needs-tags
- (find-tag-noselect f)
- (find-file-noselect f)))
+ (save-excursion
+ (let ((buf (if gud-sdb-needs-tags
+ (find-tag-noselect f)
+ (find-file-noselect f))))
+ (set-buffer buf)
+ (gud-make-debug-menu)
+ (local-set-key [menu-bar debug tbreak] '("Temporary Breakpoint" . gud-tbreak))
+ buf)))
;;;###autoload
-(defun sdb (args)
+(defun sdb (command-line)
"Run sdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
-
- (interactive "sRun sdb (like this): sdb ")
-
+ (interactive
+ (list (read-from-minibuffer "Run sdb (like this): "
+ (if (consp gud-sdb-history)
+ (car gud-sdb-history)
+ "sdb ")
+ nil nil
+ '(gud-sdb-history . 1))))
(if (and gud-sdb-needs-tags
- (not (and (boundp 'tags-file-name) (file-exists-p tags-file-name))))
+ (not (and (boundp 'tags-file-name)
+ (stringp tags-file-name)
+ (file-exists-p tags-file-name))))
(error "The sdb support requires a valid tags table to work."))
- (gud-overload-functions '((gud-debugger-startup . gud-sdb-debugger-startup)
- (gud-marker-filter . gud-sdb-marker-filter)
- (gud-find-file . gud-sdb-find-file)
- ))
-
- (gud-def gud-break "%l b" "b" "Set breakpoint at current line.")
- (gud-def gud-tbreak "%l c" "t" "Set temporary breakpoint at current line.")
- (gud-def gud-remove "%l d" "d" "Remove breakpoint at current line")
- (gud-def gud-step "s %p" "s" "Step one source line with display.")
- (gud-def gud-stepi "i %p" "i" "Step one instruction with display.")
- (gud-def gud-next "S %p" "n" "Step one line (skip functions).")
- (gud-def gud-cont "c" "r" "Continue with display.")
- (gud-def gud-print "%e/" "p" "Evaluate C expression at point.")
-
- (gud-common-init args)
+
+ (gud-common-init command-line 'gud-sdb-massage-args
+ 'gud-sdb-marker-filter 'gud-sdb-find-file)
+
+ (gud-def gud-break "%l b" "\C-b" "Set breakpoint at current line.")
+ (gud-def gud-tbreak "%l c" "\C-t" "Set temporary breakpoint at current line.")
+ (gud-def gud-remove "%l d" "\C-d" "Remove breakpoint at current line")
+ (gud-def gud-step "s %p" "\C-s" "Step one source line with display.")
+ (gud-def gud-stepi "i %p" "\C-i" "Step one instruction with display.")
+ (gud-def gud-next "S %p" "\C-n" "Step one line (skip functions).")
+ (gud-def gud-cont "c" "\C-r" "Continue with display.")
+ (gud-def gud-print "%e/" "\C-p" "Evaluate C expression at point.")
(setq comint-prompt-regexp "\\(^\\|\n\\)\\*")
+ (setq paragraph-start comint-prompt-regexp)
+ (local-set-key [menu-bar debug tbreak]
+ '("Temporary Breakpoint" . gud-tbreak))
(run-hooks 'sdb-mode-hook)
)
-
+\f
;; ======================================================================
;; dbx functions
-(defun gud-dbx-debugger-startup (file args)
- (apply 'make-comint (concat "gud-" file) "dbx" nil args))
+;;; History of argument lists passed to dbx.
+(defvar gud-dbx-history nil)
+
+(defvar gud-dbx-directories nil
+ "*A list of directories that dbx should search for source code.
+If nil, only source files in the program directory
+will be known to dbx.
+
+The file names should be absolute, or relative to the directory
+containing the executable being debugged.")
+
+(defun gud-dbx-massage-args (file args)
+ (nconc (let ((directories gud-dbx-directories)
+ (result nil))
+ (while directories
+ (setq result (cons (car directories) (cons "-I" result)))
+ (setq directories (cdr directories)))
+ (nreverse result))
+ args))
+
+(defun gud-dbx-file-name (f)
+ "Transform a relative file name to an absolute file name, for dbx."
+ (let ((result nil))
+ (if (file-exists-p f)
+ (setq result (expand-file-name f))
+ (let ((directories gud-dbx-directories))
+ (while directories
+ (let ((path (concat (car directories) "/" f)))
+ (if (file-exists-p path)
+ (setq result (expand-file-name path)
+ directories nil)))
+ (setq directories (cdr directories)))))
+ result))
(defun gud-dbx-marker-filter (string)
- (if (string-match
- "stopped in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\"" string)
+ (setq gud-marker-acc (if gud-marker-acc (concat gud-marker-acc string) string))
+
+ (let (start)
+ ;; Process all complete markers in this chunk.
+ (while (or (string-match
+ "stopped in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\""
+ gud-marker-acc start)
+ (string-match
+ "signal .* in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\""
+ gud-marker-acc start))
(setq gud-last-frame
(cons
- (substring string (match-beginning 2) (match-end 2))
+ (substring gud-marker-acc (match-beginning 2) (match-end 2))
(string-to-int
- (substring string (match-beginning 1) (match-end 1))))))
+ (substring gud-marker-acc (match-beginning 1) (match-end 1))))
+ start (match-end 0)))
+
+ ;; Search for the last incomplete line in this chunk
+ (while (string-match "\n" gud-marker-acc start)
+ (setq start (match-end 0)))
+
+ ;; If the incomplete line APPEARS to begin with another marker, keep it
+ ;; in the accumulator. Otherwise, clear the accumulator to avoid an
+ ;; unnecessary concat during the next call.
+ (setq gud-marker-acc
+ (if (string-match "\\(stopped\\|signal\\)" gud-marker-acc start)
+ (substring gud-marker-acc (match-beginning 0))
+ nil)))
string)
+;; Functions for Mips-style dbx. Given the option `-emacs', documented in
+;; OSF1, not necessarily elsewhere, it produces markers similar to gdb's.
+(defvar gud-mips-p
+ (or (string-match "^mips-[^-]*-ultrix" system-configuration)
+ ;; We haven't tested gud on this system:
+ (string-match "^mips-[^-]*-riscos" system-configuration)
+ ;; It's documented on OSF/1.3
+ (string-match "^mips-[^-]*-osf1" system-configuration)
+ (string-match "^alpha-[^-]*-osf" system-configuration))
+ "Non-nil to assume the MIPS/OSF dbx conventions (argument `-emacs').")
+
+(defun gud-mipsdbx-massage-args (file args)
+ (cons "-emacs" args))
+
+;; This is just like the gdb one except for the regexps since we need to cope
+;; with an optional breakpoint number in [] before the ^Z^Z
+(defun gud-mipsdbx-marker-filter (string)
+ (setq gud-marker-acc (concat gud-marker-acc string))
+ (let ((output ""))
+
+ ;; Process all the complete markers in this chunk.
+ (while (string-match
+ ;; This is like th gdb marker but with an optional
+ ;; leading break point number like `[1] '
+ "[][ 0-9]*\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n"
+ gud-marker-acc)
+ (setq
+
+ ;; Extract the frame position from the marker.
+ gud-last-frame
+ (cons (substring gud-marker-acc (match-beginning 1) (match-end 1))
+ (string-to-int (substring gud-marker-acc
+ (match-beginning 2)
+ (match-end 2))))
+
+ ;; Append any text before the marker to the output we're going
+ ;; to return - we don't include the marker in this text.
+ output (concat output
+ (substring gud-marker-acc 0 (match-beginning 0)))
+
+ ;; Set the accumulator to the remaining text.
+ gud-marker-acc (substring gud-marker-acc (match-end 0))))
+
+ ;; Does the remaining text look like it might end with the
+ ;; beginning of another marker? If it does, then keep it in
+ ;; gud-marker-acc until we receive the rest of it. Since we
+ ;; know the full marker regexp above failed, it's pretty simple to
+ ;; test for marker starts.
+ (if (string-match "[][ 0-9]*\032.*\\'" gud-marker-acc)
+ (progn
+ ;; Everything before the potential marker start can be output.
+ (setq output (concat output (substring gud-marker-acc
+ 0 (match-beginning 0))))
+
+ ;; Everything after, we save, to combine with later input.
+ (setq gud-marker-acc
+ (substring gud-marker-acc (match-beginning 0))))
+
+ (setq output (concat output gud-marker-acc)
+ gud-marker-acc ""))
+
+ output))
+
+;; The dbx in IRIX is a pain. It doesn't print the file name when
+;; stopping at a breakpoint (but you do get it from the `up' and
+;; `down' commands...). The only way to extract the information seems
+;; to be with a `file' command, although the current line number is
+;; available in $curline. Thus we have to look for output which
+;; appears to indicate a breakpoint. Then we prod the dbx sub-process
+;; to output the information we want with a combination of the
+;; `printf' and `file' commands as a pseudo marker which we can
+;; recognise next time through the marker-filter. This would be like
+;; the gdb marker but you can't get the file name without a newline...
+;; Note that gud-remove won't work since Irix dbx expects a breakpoint
+;; number rather than a line number etc. Maybe this could be made to
+;; work by listing all the breakpoints and picking the one(s) with the
+;; correct line number, but life's too short.
+;; d.love@dl.ac.uk (Dave Love) can be blamed for this
+
+(defvar gud-irix-p (string-match "^mips-[^-]*-irix" system-configuration)
+ "Non-nil to assume the interface appropriate for IRIX dbx.
+This works in IRIX 4, 5 and 6.")
+;; [Irix dbx seems to be a moving target. The dbx output changed
+;; subtly sometime between OS v4.0.5 and v5.2 so that, for instance,
+;; the output from `up' is no longer spotted by gud (and it's probably
+;; not distinctive enough to try to match it -- use C-<, C->
+;; exclusively) . For 5.3 and 6.0, the $curline variable changed to
+;; `long long'(why?!), so the printf stuff needed changing. The line
+;; number is cast to `long' as a compromise between the new `long
+;; long' and the original `int'. The process filter is also somewhat
+;; unreliable, sometimes not spotting the markers; I don't know
+;; whether there's anything that can be done about that. It would be
+;; much better if SGI could be persuaded to (re?)instate the MIPS
+;; -emacs flag for gdb-like output (which ought to be possible as most
+;; of the communication I've had over it has been from sgi.com).]
+
+;; this filter is influenced by the xdb one rather than the gdb one
+(defun gud-irixdbx-marker-filter (string)
+ (let (result (case-fold-search nil))
+ (if (or (string-match comint-prompt-regexp string)
+ (string-match ".*\012" string))
+ (setq result (concat gud-marker-acc string)
+ gud-marker-acc "")
+ (setq gud-marker-acc (concat gud-marker-acc string)))
+ (if result
+ (cond
+ ;; look for breakpoint or signal indication e.g.:
+ ;; [2] Process 1267 (pplot) stopped at [params:338 ,0x400ec0]
+ ;; Process 1281 (pplot) stopped at [params:339 ,0x400ec8]
+ ;; Process 1270 (pplot) Floating point exception [._read._read:16 ,0x452188]
+ ((string-match
+ "^\\(\\[[0-9]+] \\)?Process +[0-9]+ ([^)]*) [^[]+\\[[^]\n]*]\n"
+ result)
+ ;; prod dbx into printing out the line number and file
+ ;; name in a form we can grok as below
+ (process-send-string (get-buffer-process gud-comint-buffer)
+ "printf \"\032\032%1d:\",(long)$curline;file\n"))
+ ;; look for result of, say, "up" e.g.:
+ ;; .pplot.pplot(0x800) ["src/pplot.f":261, 0x400c7c]
+ ;; (this will also catch one of the lines printed by "where")
+ ((string-match
+ "^[^ ][^[]*\\[\"\\([^\"]+\\)\":\\([0-9]+\\), [^]]+]\n"
+ result)
+ (let ((file (substring result (match-beginning 1)
+ (match-end 1))))
+ (if (file-exists-p file)
+ (setq gud-last-frame
+ (cons
+ (substring
+ result (match-beginning 1) (match-end 1))
+ (string-to-int
+ (substring
+ result (match-beginning 2) (match-end 2)))))))
+ result)
+ ((string-match ; kluged-up marker as above
+ "\032\032\\([0-9]*\\):\\(.*\\)\n" result)
+ (let ((file (gud-dbx-file-name
+ (substring result (match-beginning 2) (match-end 2)))))
+ (if (and file (file-exists-p file))
+ (setq gud-last-frame
+ (cons
+ file
+ (string-to-int
+ (substring
+ result (match-beginning 1) (match-end 1)))))))
+ (setq result (substring result 0 (match-beginning 0))))))
+ (or result "")))
+
(defun gud-dbx-find-file (f)
- (find-file-noselect f))
+ (save-excursion
+ (let ((realf (gud-dbx-file-name f)))
+ (if realf
+ (let ((buf (find-file-noselect realf)))
+ (set-buffer buf)
+ (gud-make-debug-menu)
+ (local-set-key [menu-bar debug up] '("Up Stack" . gud-up))
+ (local-set-key [menu-bar debug down] '("Down Stack" . gud-down))
+ buf)
+ nil))))
;;;###autoload
-(defun dbx (args)
+(defun dbx (command-line)
"Run dbx on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
- (interactive "sRun dbx (like this): dbx")
- (gud-overload-functions '((gud-debugger-startup . gud-dbx-debugger-startup)
- (gud-marker-filter . gud-dbx-marker-filter)
- (gud-find-file . gud-dbx-find-file)
- ))
-
- (gud-def gud-break "stop at \"%f\":%l"
- "b" "Set breakpoint at current line.")
- (gud-def gud-remove "clear %l" "d" "Remove breakpoint at current line")
- (gud-def gud-step "step %p" "s" "Step one line with display.")
- (gud-def gud-stepi "stepi %p" "i" "Step one instruction with display.")
- (gud-def gud-next "next %p" "n" "Step one line (skip functions).")
- (gud-def gud-cont "cont" "r" "Continue with display.")
- (gud-def gud-up "up %p" "<" "Up (numeric arg) stack frames.")
- (gud-def gud-down "down %p" ">" "Down (numeric arg) stack frames.")
- (gud-def gud-print "print %e" "p" "Evaluate C expression at point.")
-
- (gud-common-init args)
- (setq comint-prompt-regexp "^[^)]*dbx) *")
-
+ (interactive
+ (list (read-from-minibuffer "Run dbx (like this): "
+ (if (consp gud-dbx-history)
+ (car gud-dbx-history)
+ "dbx ")
+ nil nil
+ '(gud-dbx-history . 1))))
+
+ (cond
+ (gud-mips-p
+ (gud-common-init command-line 'gud-mipsdbx-massage-args
+ 'gud-mipsdbx-marker-filter 'gud-dbx-find-file))
+ (gud-irix-p
+ (gud-common-init command-line 'gud-dbx-massage-args
+ 'gud-irixdbx-marker-filter 'gud-dbx-find-file))
+ (t
+ (gud-common-init command-line 'gud-dbx-massage-args
+ 'gud-dbx-marker-filter 'gud-dbx-find-file)))
+
+ (cond
+ (gud-mips-p
+ (gud-def gud-up "up %p" "<" "Up (numeric arg) stack frames.")
+ (gud-def gud-down "down %p" ">" "Down (numeric arg) stack frames.")
+ (gud-def gud-break "stop at \"%f\":%l"
+ "\C-b" "Set breakpoint at current line.")
+ (gud-def gud-finish "return" "\C-f" "Finish executing current function."))
+ (gud-irix-p
+ (gud-def gud-break "stop at \"%d%f\":%l"
+ "\C-b" "Set breakpoint at current line.")
+ (gud-def gud-finish "return" "\C-f" "Finish executing current function.")
+ (gud-def gud-up "up %p; printf \"\032\032%1ld:\",(long)$curline;file\n"
+ "<" "Up (numeric arg) stack frames.")
+ (gud-def gud-down "down %p; printf \"\032\032%1ld:\",(long)$curline;file\n"
+ ">" "Down (numeric arg) stack frames.")
+ ;; Make dbx give out the source location info that we need.
+ (process-send-string (get-buffer-process gud-comint-buffer)
+ "printf \"\032\032%1d:\",(long)$curline;file\n"))
+ (t
+ (gud-def gud-up "up %p" "<" "Up (numeric arg) stack frames.")
+ (gud-def gud-down "down %p" ">" "Down (numeric arg) stack frames.")
+ (gud-def gud-break "file \"%d%f\"\nstop at %l"
+ "\C-b" "Set breakpoint at current line.")))
+
+ (gud-def gud-remove "clear %l" "\C-d" "Remove breakpoint at current line")
+ (gud-def gud-step "step %p" "\C-s" "Step one line with display.")
+ (gud-def gud-stepi "stepi %p" "\C-i" "Step one instruction with display.")
+ (gud-def gud-next "next %p" "\C-n" "Step one line (skip functions).")
+ (gud-def gud-cont "cont" "\C-r" "Continue with display.")
+ (gud-def gud-print "print %e" "\C-p" "Evaluate C expression at point.")
+
+ (setq comint-prompt-regexp "^[^)\n]*dbx) *")
+ (setq paragraph-start comint-prompt-regexp)
+ (local-set-key [menu-bar debug up] '("Up Stack" . gud-up))
+ (local-set-key [menu-bar debug down] '("Down Stack" . gud-down))
(run-hooks 'dbx-mode-hook)
)
+\f
+;; ======================================================================
+;; xdb (HP PARISC debugger) functions
+
+;;; History of argument lists passed to xdb.
+(defvar gud-xdb-history nil)
+
+(defvar gud-xdb-directories nil
+ "*A list of directories that xdb should search for source code.
+If nil, only source files in the program directory
+will be known to xdb.
+
+The file names should be absolute, or relative to the directory
+containing the executable being debugged.")
+
+(defun gud-xdb-massage-args (file args)
+ (nconc (let ((directories gud-xdb-directories)
+ (result nil))
+ (while directories
+ (setq result (cons (car directories) (cons "-d" result)))
+ (setq directories (cdr directories)))
+ (nreverse result))
+ args))
+
+(defun gud-xdb-file-name (f)
+ "Transform a relative pathname to a full pathname in xdb mode"
+ (let ((result nil))
+ (if (file-exists-p f)
+ (setq result (expand-file-name f))
+ (let ((directories gud-xdb-directories))
+ (while directories
+ (let ((path (concat (car directories) "/" f)))
+ (if (file-exists-p path)
+ (setq result (expand-file-name path)
+ directories nil)))
+ (setq directories (cdr directories)))))
+ result))
+
+;; xdb does not print the lines all at once, so we have to accumulate them
+(defun gud-xdb-marker-filter (string)
+ (let (result)
+ (if (or (string-match comint-prompt-regexp string)
+ (string-match ".*\012" string))
+ (setq result (concat gud-marker-acc string)
+ gud-marker-acc "")
+ (setq gud-marker-acc (concat gud-marker-acc string)))
+ (if result
+ (if (or (string-match "\\([^\n \t:]+\\): [^:]+: \\([0-9]+\\)[: ]"
+ result)
+ (string-match "[^: \t]+:[ \t]+\\([^:]+\\): [^:]+: \\([0-9]+\\):"
+ result))
+ (let ((line (string-to-int
+ (substring result (match-beginning 2) (match-end 2))))
+ (file (gud-xdb-file-name
+ (substring result (match-beginning 1) (match-end 1)))))
+ (if file
+ (setq gud-last-frame (cons file line))))))
+ (or result "")))
+
+(defun gud-xdb-find-file (f)
+ (save-excursion
+ (let ((realf (gud-xdb-file-name f)))
+ (if realf
+ (let ((buf (find-file-noselect realf)))
+ (set-buffer buf)
+ (gud-make-debug-menu)
+ (local-set-key [menu-bar debug tbreak]
+ '("Temporary Breakpoint" . gud-tbreak))
+ (local-set-key [menu-bar debug finish]
+ '("Finish Function" . gud-finish))
+ (local-set-key [menu-bar debug up] '("Up Stack" . gud-up))
+ (local-set-key [menu-bar debug down] '("Down Stack" . gud-down))
+ buf)
+ nil))))
+
+;;;###autoload
+(defun xdb (command-line)
+ "Run xdb on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger.
+
+You can set the variable 'gud-xdb-directories' to a list of program source
+directories if your program contains sources from more than one directory."
+ (interactive
+ (list (read-from-minibuffer "Run xdb (like this): "
+ (if (consp gud-xdb-history)
+ (car gud-xdb-history)
+ "xdb ")
+ nil nil
+ '(gud-xdb-history . 1))))
+
+ (gud-common-init command-line 'gud-xdb-massage-args
+ 'gud-xdb-marker-filter 'gud-xdb-find-file)
+
+ (gud-def gud-break "b %f:%l" "\C-b" "Set breakpoint at current line.")
+ (gud-def gud-tbreak "b %f:%l\\t" "\C-t"
+ "Set temporary breakpoint at current line.")
+ (gud-def gud-remove "db" "\C-d" "Remove breakpoint at current line")
+ (gud-def gud-step "s %p" "\C-s" "Step one line with display.")
+ (gud-def gud-next "S %p" "\C-n" "Step one line (skip functions).")
+ (gud-def gud-cont "c" "\C-r" "Continue with display.")
+ (gud-def gud-up "up %p" "<" "Up (numeric arg) stack frames.")
+ (gud-def gud-down "down %p" ">" "Down (numeric arg) stack frames.")
+ (gud-def gud-finish "bu\\t" "\C-f" "Finish executing current function.")
+ (gud-def gud-print "p %e" "\C-p" "Evaluate C expression at point.")
+
+ (setq comint-prompt-regexp "^>")
+ (setq paragraph-start comint-prompt-regexp)
+ (local-set-key [menu-bar debug tbreak] '("Temporary Breakpoint" . gud-tbreak))
+ (local-set-key [menu-bar debug finish] '("Finish Function" . gud-finish))
+ (local-set-key [menu-bar debug up] '("Up Stack" . gud-up))
+ (local-set-key [menu-bar debug down] '("Down Stack" . gud-down))
+ (run-hooks 'xdb-mode-hook))
+\f
+;; ======================================================================
+;; perldb functions
+
+;;; History of argument lists passed to perldb.
+(defvar gud-perldb-history nil)
+
+(defun gud-perldb-massage-args (file args)
+ (cons "-d" (cons (car args) (cons "-emacs" (cdr args)))))
+
+;; There's no guarantee that Emacs will hand the filter the entire
+;; marker at once; it could be broken up across several strings. We
+;; might even receive a big chunk with several markers in it. If we
+;; receive a chunk of text which looks like it might contain the
+;; beginning of a marker, we save it here between calls to the
+;; filter.
+(defvar gud-perldb-marker-acc "")
+
+(defun gud-perldb-marker-filter (string)
+ (setq gud-marker-acc (concat gud-marker-acc string))
+ (let ((output ""))
+
+ ;; Process all the complete markers in this chunk.
+ (while (string-match "\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n"
+ gud-marker-acc)
+ (setq
+
+ ;; Extract the frame position from the marker.
+ gud-last-frame
+ (cons (substring gud-marker-acc (match-beginning 1) (match-end 1))
+ (string-to-int (substring gud-marker-acc
+ (match-beginning 2)
+ (match-end 2))))
+
+ ;; Append any text before the marker to the output we're going
+ ;; to return - we don't include the marker in this text.
+ output (concat output
+ (substring gud-marker-acc 0 (match-beginning 0)))
+
+ ;; Set the accumulator to the remaining text.
+ gud-marker-acc (substring gud-marker-acc (match-end 0))))
+
+ ;; Does the remaining text look like it might end with the
+ ;; beginning of another marker? If it does, then keep it in
+ ;; gud-marker-acc until we receive the rest of it. Since we
+ ;; know the full marker regexp above failed, it's pretty simple to
+ ;; test for marker starts.
+ (if (string-match "\032.*\\'" gud-marker-acc)
+ (progn
+ ;; Everything before the potential marker start can be output.
+ (setq output (concat output (substring gud-marker-acc
+ 0 (match-beginning 0))))
+
+ ;; Everything after, we save, to combine with later input.
+ (setq gud-marker-acc
+ (substring gud-marker-acc (match-beginning 0))))
+
+ (setq output (concat output gud-marker-acc)
+ gud-marker-acc ""))
+
+ output))
+
+(defun gud-perldb-find-file (f)
+ (save-excursion
+ (let ((buf (find-file-noselect f)))
+ (set-buffer buf)
+ (gud-make-debug-menu)
+ buf)))
+
+;;;###autoload
+(defun perldb (command-line)
+ "Run perldb on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger."
+ (interactive
+ (list (read-from-minibuffer "Run perldb (like this): "
+ (if (consp gud-perldb-history)
+ (car gud-perldb-history)
+ "perl ")
+ nil nil
+ '(gud-perldb-history . 1))))
+
+ (gud-common-init command-line 'gud-perldb-massage-args
+ 'gud-perldb-marker-filter 'gud-perldb-find-file)
+
+ (gud-def gud-break "b %l" "\C-b" "Set breakpoint at current line.")
+ (gud-def gud-remove "d %l" "\C-d" "Remove breakpoint at current line")
+ (gud-def gud-step "s" "\C-s" "Step one source line with display.")
+ (gud-def gud-next "n" "\C-n" "Step one line (skip functions).")
+ (gud-def gud-cont "c" "\C-r" "Continue with display.")
+; (gud-def gud-finish "finish" "\C-f" "Finish executing current function.")
+; (gud-def gud-up "up %p" "<" "Up N stack frames (numeric arg).")
+; (gud-def gud-down "down %p" ">" "Down N stack frames (numeric arg).")
+ (gud-def gud-print "%e" "\C-p" "Evaluate perl expression at point.")
+
+ (setq comint-prompt-regexp "^ DB<[0-9]+> ")
+ (setq paragraph-start comint-prompt-regexp)
+ (run-hooks 'perldb-mode-hook)
+ )
;;
;; End of debugger-specific information
;;
+\f
;;; When we send a command to the debugger via gud-call, it's annoying
;;; to see the command and the new prompt inserted into the debugger's
;;; buffer; we have other ways of knowing the command has completed.
(defun gud-mode ()
"Major mode for interacting with an inferior debugger process.
- You start it up with one of the commands M-x gdb, M-x sdb, or
-M-x dbx. Each entry point finishes by executing a hook; gdb-mode-hook,
-sdb-mode-hook or dbx-mode-hook respectively.
+ You start it up with one of the commands M-x gdb, M-x sdb, M-x dbx,
+M-x perldb, or M-x xdb. Each entry point finishes by executing a
+hook; `gdb-mode-hook', `sdb-mode-hook', `dbx-mode-hook',
+`perldb-mode-hook', or `xdb-mode-hook' respectively.
After startup, the following commands are available in both the GUD
interaction buffer and any source buffer GUD visits due to a breakpoint stop
or step operation:
-\\{gud-mode-map}
-
\\[gud-break] sets a breakpoint at the current file and line. In the
GUD buffer, the current file and line are those of the last breakpoint or
step. In a source buffer, they are the buffer's file and current line.
+\\[gud-remove] removes breakpoints on the current file and line.
+
\\[gud-refresh] displays in the source window the last line referred to
in the gud buffer.
\\[gud-print] tries to find the largest C lvalue or function-call expression
around point, and sends it to the debugger for value display.
-The above commands are common to all supported debuggers.
+The above commands are common to all supported debuggers except xdb which
+does not support stepping instructions.
-Under gdb and sdb, \\[gud-tbreak] behaves exactly like \\[gud-break],
+Under gdb, sdb and xdb, \\[gud-tbreak] behaves exactly like \\[gud-break],
except that the breakpoint is temporary; that is, it is removed when
execution stops on it.
-Under gdb and dbx, \\[gud-up] pops up through an enclosing stack
+Under gdb, dbx, and xdb, \\[gud-up] pops up through an enclosing stack
frame. \\[gud-down] drops back down through one.
-If you are using gdb, \\[gdb-finish] runs execution to the return from
+If you are using gdb or xdb, \\[gud-finish] runs execution to the return from
the current function and stops.
+All the keystrokes above are accessible in the GUD buffer
+with the prefix C-c, and in all buffers through the prefix C-x C-a.
+
All pre-defined functions for which the concept make sense repeat
themselves the appropriate number of times if you give a prefix
argument.
-You may use the gud-def macro in the initialization hook to define other
+You may use the `gud-def' macro in the initialization hook to define other
commands.
Other commands for interacting with the debugger process are inherited from
(comint-mode)
(setq major-mode 'gud-mode)
(setq mode-name "Debugger")
- (setq mode-line-process '(": %s"))
- (use-local-map (copy-keymap comint-mode-map))
- (define-key (current-local-map)
- gud-key-prefix (lookup-key gud-mode-map gud-key-prefix))
+ (setq mode-line-process '(":%s"))
+ (use-local-map comint-mode-map)
+ (gud-make-debug-menu)
+ (define-key (current-local-map) "\C-c\C-l" 'gud-refresh)
(make-local-variable 'gud-last-frame)
(setq gud-last-frame nil)
(make-local-variable 'comint-prompt-regexp)
+ (make-local-variable 'paragraph-start)
(make-local-variable 'gud-delete-prompt-marker)
(setq gud-delete-prompt-marker (make-marker))
- (run-hooks 'gud-mode-hook)
-)
-
-(defvar gud-comint-buffer nil)
-
-(defun gud-common-init (args)
- ;; Perform initializations common to all debuggers
- ;; There *must* be a cleaner way to lex the arglist...
- (let (file i)
- (if (string= args "")
- (setq args nil)
- (set-buffer (get-buffer-create "*gud-scratch*"))
- (erase-buffer)
- (insert args)
- (goto-char (point-max))
- (insert "\")")
- (goto-char (point-min))
- (insert "(\"")
- (while (re-search-forward " +" nil t)
- (replace-match "\" \"" nil nil))
- (goto-char (point-min))
- (while (re-search-forward "\"\"" nil t)
- (replace-match "" nil nil))
- (setq args (read (buffer-string)))
- (kill-buffer (current-buffer)))
- (setq i (1- (length args)))
- (while (and (>= i 0) (not (= (aref (nth i args) 0) ?-)))
- (setq file (nth i args)) (setq i (1- i)))
- (let* ((path (expand-file-name file))
- (filepart (file-name-nondirectory path)))
- (switch-to-buffer (concat "*gud-" filepart "*"))
- (setq default-directory (file-name-directory path))
- (or (bolp) (newline))
- (insert "Current directory is " default-directory "\n")
- (gud-debugger-startup filepart args)))
+ (run-hooks 'gud-mode-hook))
+
+;; Chop STRING into words separated by SPC or TAB and return a list of them.
+(defun gud-chop-words (string)
+ (let ((i 0) (beg 0)
+ (len (length string))
+ (words nil))
+ (while (< i len)
+ (if (memq (aref string i) '(?\t ? ))
+ (progn
+ (setq words (cons (substring string beg i) words)
+ beg (1+ i))
+ (while (and (< beg len) (memq (aref string beg) '(?\t ? )))
+ (setq beg (1+ beg)))
+ (setq i (1+ beg)))
+ (setq i (1+ i))))
+ (if (< beg len)
+ (setq words (cons (substring string beg) words)))
+ (nreverse words)))
+
+;; Perform initializations common to all debuggers.
+;; The first arg is the specified command line,
+;; which starts with the program to debug.
+;; The other three args specify the values to use
+;; for local variables in the debugger buffer.
+(defun gud-common-init (command-line massage-args marker-filter find-file)
+ (let* ((words (gud-chop-words command-line))
+ (program (car words))
+ ;; Extract the file name from WORDS
+ ;; and put t in its place.
+ ;; Later on we will put the modified file name arg back there.
+ (file-word (let ((w (cdr words)))
+ (while (and w (= ?- (aref (car w) 0)))
+ (setq w (cdr w)))
+ (and w
+ (prog1 (car w)
+ (setcar w t)))))
+ (file-subst
+ (and file-word (substitute-in-file-name file-word)))
+ (args (cdr words))
+ ;; If a directory was specified, expand the file name.
+ ;; Otherwise, don't expand it, so GDB can use the PATH.
+ ;; A file name without directory is literally valid
+ ;; only if the file exists in ., and in that case,
+ ;; omitting the expansion here has no visible effect.
+ (file (and file-word
+ (if (file-name-directory file-subst)
+ (expand-file-name file-subst)
+ file-subst)))
+ (filepart (and file-word (concat "-" (file-name-nondirectory file)))))
+ (switch-to-buffer (concat "*gud" filepart "*"))
+ ;; Set default-directory to the file's directory.
+ (and file-word
+ ;; Don't set default-directory if no directory was specified.
+ ;; In that case, either the file is found in the current directory,
+ ;; in which case this setq is a no-op,
+ ;; or it is found by searching PATH,
+ ;; in which case we don't know what directory it was found in.
+ (file-name-directory file)
+ (setq default-directory (file-name-directory file)))
+ (or (bolp) (newline))
+ (insert "Current directory is " default-directory "\n")
+ ;; Put the substituted and expanded file name back in its place.
+ (let ((w args))
+ (while (and w (not (eq (car w) t)))
+ (setq w (cdr w)))
+ (if w
+ (setcar w file)))
+ (apply 'make-comint (concat "gud" filepart) program nil
+ (funcall massage-args file args)))
+ ;; Since comint clobbered the mode, we don't set it until now.
(gud-mode)
+ (make-local-variable 'gud-marker-filter)
+ (setq gud-marker-filter marker-filter)
+ (make-local-variable 'gud-find-file)
+ (setq gud-find-file find-file)
+
(set-process-filter (get-buffer-process (current-buffer)) 'gud-filter)
(set-process-sentinel (get-buffer-process (current-buffer)) 'gud-sentinel)
(gud-set-buffer)
(cond ((eq major-mode 'gud-mode)
(setq gud-comint-buffer (current-buffer)))))
+(defvar gud-filter-defer-flag nil
+ "Non-nil means don't process anything from the debugger right now.
+It is saved for when this flag is not set.")
+
+(defvar gud-filter-pending-text nil
+ "Non-nil means this is text that has been saved for later in `gud-filter'.")
+
;; These functions are responsible for inserting output from your debugger
;; into the buffer. The hard work is done by the method that is
;; the value of gud-marker-filter.
(defun gud-filter (proc string)
;; Here's where the actual buffer insertion is done
- (let ((inhibit-quit t))
- (save-excursion
- (set-buffer (process-buffer proc))
- (let ((moving (= (point) (process-mark proc)))
- (output-after-point (< (point) (process-mark proc))))
- (save-excursion
- (goto-char (process-mark proc))
- ;; If we have been so requested, delete the debugger prompt.
- (if (marker-buffer gud-delete-prompt-marker)
- (progn
- (delete-region (point) gud-delete-prompt-marker)
- (set-marker gud-delete-prompt-marker nil)))
- (insert-before-markers (gud-marker-filter string))
- ;; Check for a filename-and-line number.
- ;; Don't display the specified file
- ;; unless (1) point is at or after the position where output appears
- ;; and (2) this buffer is on the screen.
- (if (and gud-last-frame
- (not output-after-point)
- (get-buffer-window (current-buffer)))
- (gud-display-frame)))
- (if moving (goto-char (process-mark proc)))))))
+ (let (output process-window)
+ (if (buffer-name (process-buffer proc))
+ (if gud-filter-defer-flag
+ ;; If we can't process any text now,
+ ;; save it for later.
+ (setq gud-filter-pending-text
+ (concat (or gud-filter-pending-text "") string))
+
+ ;; If we have to ask a question during the processing,
+ ;; defer any additional text that comes from the debugger
+ ;; during that time.
+ (let ((gud-filter-defer-flag t))
+ ;; Process now any text we previously saved up.
+ (if gud-filter-pending-text
+ (setq string (concat gud-filter-pending-text string)
+ gud-filter-pending-text nil))
+ (save-excursion
+ (set-buffer (process-buffer proc))
+ ;; If we have been so requested, delete the debugger prompt.
+ (if (marker-buffer gud-delete-prompt-marker)
+ (progn
+ (delete-region (process-mark proc) gud-delete-prompt-marker)
+ (set-marker gud-delete-prompt-marker nil)))
+ ;; Save the process output, checking for source file markers.
+ (setq output (gud-marker-filter string))
+ ;; Check for a filename-and-line number.
+ ;; Don't display the specified file
+ ;; unless (1) point is at or after the position where output appears
+ ;; and (2) this buffer is on the screen.
+ (setq process-window
+ (and gud-last-frame
+ (>= (point) (process-mark proc))
+ (get-buffer-window (current-buffer))))
+
+ ;; Let the comint filter do the actual insertion.
+ ;; That lets us inherit various comint features.
+ (comint-output-filter proc output)))
+
+ ;; Put the arrow on the source line.
+ ;; This must be outside of the save-excursion
+ ;; in case the source file is our current buffer.
+ (if process-window
+ (save-selected-window
+ (select-window process-window)
+ (gud-display-frame))
+ ;; We have to be in the proper buffer, (process-buffer proc),
+ ;; but not in a save-excursion, because that would restore point.
+ (let ((old-buf (current-buffer)))
+ (set-buffer (process-buffer proc))
+ (unwind-protect
+ (gud-display-frame)
+ (set-buffer old-buf))))
+
+ ;; If we deferred text that arrived during this processing,
+ ;; handle it now.
+ (if gud-filter-pending-text
+ (gud-filter proc ""))))))
(defun gud-sentinel (proc msg)
(cond ((null (buffer-name (process-buffer proc)))
;; buffer killed
;; Stop displaying an arrow in a source file.
(setq overlay-arrow-position nil)
- (setq gud-minor-mode nil)
(set-process-buffer proc nil))
((memq (process-status proc) '(signal exit))
;; Stop displaying an arrow in a source file.
- (setq gud-minor-mode nil)
(setq overlay-arrow-position nil)
;; Fix the mode line.
(setq mode-line-process
- (concat ": "
+ (concat ":"
(symbol-name (process-status proc))))
(let* ((obuf (current-buffer)))
;; save-excursion isn't the right thing if
(progn
;; Write something in *compilation* and hack its mode line,
(set-buffer (process-buffer proc))
- ;; Force mode line redisplay soon
- (set-buffer-modified-p (buffer-modified-p))
+ (force-mode-line-update)
(if (eobp)
(insert ?\n mode-name " " msg)
(save-excursion
(progn
(gud-set-buffer)
(gud-display-line (car gud-last-frame) (cdr gud-last-frame))
- (setq gud-last-frame nil))))
+ (setq gud-last-last-frame gud-last-frame
+ gud-last-frame nil))))
;; Make sure the file named TRUE-FILE is in a buffer that appears on the screen
;; and that its line LINE is visible.
;; to get around the fact that this is called inside a save-excursion.
(defun gud-display-line (true-file line)
- (let* ((buffer (gud-find-file true-file))
+ (let* ((last-nonmenu-event t) ; Prevent use of dialog box for questions.
+ (buffer
+ (save-excursion
+ (or (eq (current-buffer) gud-comint-buffer)
+ (set-buffer gud-comint-buffer))
+ (gud-find-file true-file)))
(window (display-buffer buffer))
(pos))
(save-excursion
(set-buffer buffer)
- (make-local-variable 'gud-minor-mode)
- (setq gud-minor-mode t)
(save-restriction
(widen)
(goto-line line)
;;; The gud-call function must do the right thing whether its invoking
;;; keystroke is from the GUD buffer itself (via major-mode binding)
-;;; or a C buffer in GUD minor mode. In the former case, we want to
-;;; supply data from gud-last-frame. Here's how we do it:
+;;; or a C buffer. In the former case, we want to supply data from
+;;; gud-last-frame. Here's how we do it:
(defun gud-format-command (str arg)
- (let ((minor (not (eq (current-buffer) gud-comint-buffer))))
- (if (string-match "\\(.*\\)%f\\(.*\\)" str)
- (progn
- (setq str (concat
- (substring str (match-beginning 1) (match-end 1))
- (if minor
- (buffer-file-name)
- (car gud-last-frame))
- (substring str (match-beginning 2) (match-end 2))))))
- (if (string-match "\\(.*\\)%l\\(.*\\)" str)
- (progn
- (setq str (concat
- (substring str (match-beginning 1) (match-end 1))
- (if minor
- (save-excursion
- (beginning-of-line)
- (save-restriction (widen)
- (1+ (count-lines 1 (point)))))
- (cdr gud-last-frame))
- (substring str (match-beginning 2) (match-end 2))))))
- (if (string-match "\\(.*\\)%e\\(.*\\)" str)
- (progn
- (setq str (concat
- (substring str (match-beginning 1) (match-end 1))
- (find-c-expr)
- (substring str (match-beginning 2) (match-end 2))))))
- (if (string-match "\\(.*\\)%a\\(.*\\)" str)
- (progn
- (setq str (concat
- (substring str (match-beginning 1) (match-end 1))
- (gud-read-address)
- (substring str (match-beginning 2) (match-end 2))))))
- (if (string-match "\\(.*\\)%p\\(.*\\)" str)
- (progn
- (setq str (concat
- (substring str (match-beginning 1) (match-end 1))
- (if arg (int-to-string arg) "")
- (substring str (match-beginning 2) (match-end 2))))))
- )
- str
- )
+ (let ((insource (not (eq (current-buffer) gud-comint-buffer)))
+ (frame (or gud-last-frame gud-last-last-frame))
+ result)
+ (while (and str (string-match "\\([^%]*\\)%\\([adeflp]\\)" str))
+ (let ((key (string-to-char (substring str (match-beginning 2))))
+ subst)
+ (cond
+ ((eq key ?f)
+ (setq subst (file-name-nondirectory (if insource
+ (buffer-file-name)
+ (car frame)))))
+ ((eq key ?d)
+ (setq subst (file-name-directory (if insource
+ (buffer-file-name)
+ (car frame)))))
+ ((eq key ?l)
+ (setq subst (if insource
+ (save-excursion
+ (beginning-of-line)
+ (save-restriction (widen)
+ (1+ (count-lines 1 (point)))))
+ (cdr frame))))
+ ((eq key ?e)
+ (setq subst (find-c-expr)))
+ ((eq key ?a)
+ (setq subst (gud-read-address)))
+ ((eq key ?p)
+ (setq subst (if arg (int-to-string arg) ""))))
+ (setq result (concat result
+ (substring str (match-beginning 1) (match-end 1))
+ subst)))
+ (setq str (substring str (match-end 2))))
+ ;; There might be text left in STR when the loop ends.
+ (concat result str)))
(defun gud-read-address ()
"Return a string containing the core-address found in the buffer at point."
(gud-set-buffer)
(let ((command (concat command "\n"))
(proc (get-buffer-process gud-comint-buffer)))
-
+ (or proc (error "Current buffer has no process"))
;; Arrange for the current prompt to get deleted.
(save-excursion
(set-buffer gud-comint-buffer)
"Fix up a possibly garbled display, and redraw the arrow."
(interactive "P")
(recenter arg)
+ (or gud-last-frame (setq gud-last-frame gud-last-last-frame))
(gud-display-frame))
-
+\f
;;; Code for parsing expressions out of C code. The single entry point is
;;; find-c-expr, which tries to return an lvalue expression from around point.
;;;
;;; The rest of this file is a hacked version of gdbsrc.el by
;;; Debby Ayers <ayers@asc.slb.com>,
;;; Rich Schaefer <schaefer@asc.slb.com> Schlumberger, Austin, Tx.
-;;; ??? We're waiting on papers from these people
(defun find-c-expr ()
"Returns the C expr that surrounds point."
(while (expr-compound test-expr expr)
(setq expr (cons (car test-expr) (cdr expr)))
(goto-char (car expr))
- (setq test-expr (expr-prev))
- )
+ (setq test-expr (expr-prev)))
(goto-char p)
(setq test-expr (expr-next))
(while (expr-compound expr test-expr)
(setq expr (cons (car expr) (cdr test-expr)))
(setq test-expr (expr-next))
)
- (buffer-substring (car expr) (cdr expr))
- )
- )
- )
+ (buffer-substring (car expr) (cdr expr)))))
(defun expr-cur ()
"Returns the expr that point is in; point is set to beginning of expr.
The expr is represented as a cons cell, where the car specifies the point in
the current buffer that marks the beginning of the expr and the cdr specifies
-the character after the end of the expr"
+the character after the end of the expr."
(let ((p (point)) (begin) (end))
- (back-expr)
+ (expr-backward-sexp)
(setq begin (point))
- (forw-expr)
+ (expr-forward-sexp)
(setq end (point))
(if (>= p end)
(progn
(setq begin p)
(goto-char p)
- (forw-expr)
+ (expr-forward-sexp)
(setq end (point))
)
)
(goto-char begin)
- (cons begin end)
- )
- )
+ (cons begin end)))
-(defun back-expr ()
- "Version of backward-sexp that catches errors"
+(defun expr-backward-sexp ()
+ "Version of `backward-sexp' that catches errors."
(condition-case nil
(backward-sexp)
(error t)))
-(defun forw-expr ()
- "Version of forward-sexp that catches errors"
+(defun expr-forward-sexp ()
+ "Version of `forward-sexp' that catches errors."
(condition-case nil
(forward-sexp)
(error t)))
the current buffer that marks the beginning of the expr and the cdr specifies
the character after the end of the expr"
(let ((begin) (end))
- (back-expr)
+ (expr-backward-sexp)
(setq begin (point))
- (forw-expr)
+ (expr-forward-sexp)
(setq end (point))
(goto-char begin)
(cons begin end)))
"Returns the following expr, point is set to beginning of that expr.
The expr is represented as a cons cell, where the car specifies the point in
the current buffer that marks the beginning of the expr and the cdr specifies
-the character after the end of the expr"
+the character after the end of the expr."
(let ((begin) (end))
- (forw-expr)
- (forw-expr)
+ (expr-forward-sexp)
+ (expr-forward-sexp)
(setq end (point))
- (back-expr)
+ (expr-backward-sexp)
(setq begin (point))
- (cons begin end)
- )
- )
+ (cons begin end)))
(defun expr-compound-sep (span-start span-end)
"Returns '.' for '->' & '.', returns ' ' for white space,
-returns '?' for other puctuation."
+returns '?' for other punctuation."
(let ((result ? )
(syntax))
(while (< span-start span-end)
(t (setq span-start span-end)
(setq result ??)))))
(setq span-start (+ span-start 1)))
- result
- )
- )
+ result))
(defun expr-compound (first second)
- "Returns non-nil if the concatenation of two exprs results in a single C
-token. The two exprs are represented as a cons cells, where the car
+ "Non-nil if concatenating FIRST and SECOND makes a single C token.
+The two exprs are represented as a cons cells, where the car
specifies the point in the current buffer that marks the beginning of the
-expr and the cdr specifies the character after the end of the expr
+expr and the cdr specifies the character after the end of the expr.
Link exprs of the form:
Expr -> Expr
Expr . Expr
((= span-end ?[ ) t )
(t nil))
)
- (t nil))
- )
- )
+ (t nil))))
+
+(provide 'gud)
;;; gud.el ends here
HCoop / bpt / emacs.git / blobdiff