;;; window.el --- GNU Emacs window commands aside from those written in C
-;; Copyright (C) 1985, 1989, 1992, 1993, 1994, 2000, 2001, 2002, 2004, 2005
-;; Free Software Foundation, Inc.
+;; Copyright (C) 1985, 1989, 1992, 1993, 1994, 2000, 2001, 2002,
+;; 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
;; Maintainer: FSF
;; Keywords: internal
;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 2, or (at your option)
+;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;; GNU Emacs is distributed in the hope that it will be useful,
;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING. If not, write to the
-;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-;; Boston, MA 02111-1307, USA.
+;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+;; Boston, MA 02110-1301, USA.
;;; Commentary:
This macro saves and restores the current buffer, since otherwise
its normal operation could potentially make a different
-buffer current. It does not alter the buffer list ordering,
+buffer current. It does not alter the buffer list ordering.
This macro saves and restores the selected window, as well as
the selected window in each frame. If the previously selected
;; select-window changes frame-selected-window for whatever
;; frame that window is in.
(save-selected-window-alist
- (mapcar (lambda (frame) (list frame (frame-selected-window frame)))
+ (mapcar (lambda (frame) (cons frame (frame-selected-window frame)))
(frame-list))))
(save-current-buffer
(unwind-protect
(progn ,@body)
(dolist (elt save-selected-window-alist)
(and (frame-live-p (car elt))
- (window-live-p (cadr elt))
- (set-frame-selected-window (car elt) (cadr elt))))
+ (window-live-p (cdr elt))
+ (set-frame-selected-window (car elt) (cdr elt))))
(if (window-live-p save-selected-window-window)
(select-window save-selected-window-window))))))
PROC is called with a window as argument.
Optional second arg MINIBUF t means count the minibuffer window even
-if not active. MINIBUF nil or omitted means count the minibuffer iff
+if not active. MINIBUF nil or omitted means count the minibuffer only if
it is active. MINIBUF neither t nor nil means not to count the
minibuffer even if it is active.
returned.
Optional second arg MINIBUF t means count the minibuffer window even
-if not active. MINIBUF nil or omitted means count the minibuffer iff
+if not active. MINIBUF nil or omitted means count the minibuffer only if
it is active. MINIBUF neither t nor nil means not to count the
minibuffer even if it is active.
(defalias 'some-window 'get-window-with-predicate)
+;; This should probably be written in C (i.e., without using `walk-windows').
+(defun get-buffer-window-list (buffer &optional minibuf frame)
+ "Return list of all windows displaying BUFFER, or nil if none.
+BUFFER can be a buffer or a buffer name.
+See `walk-windows' for the meaning of MINIBUF and FRAME."
+ (let ((buffer (if (bufferp buffer) buffer (get-buffer buffer))) windows)
+ (walk-windows (function (lambda (window)
+ (if (eq (window-buffer window) buffer)
+ (setq windows (cons window windows)))))
+ minibuf frame)
+ windows))
+
(defun minibuffer-window-active-p (window)
"Return t if WINDOW (a minibuffer window) is now active."
(eq window (active-minibuffer-window)))
(or (= (nth 2 edges) (nth 2 (window-edges (previous-window))))
(= (nth 0 edges) (nth 0 (window-edges (next-window))))))))
-
-(defun balance-windows ()
- "Make all visible windows the same height (approximately)."
+\f
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;; `balance-windows' subroutines using `window-tree'
+
+;;; Translate from internal window tree format
+
+(defun bw-get-tree (&optional window-or-frame)
+ "Get a window split tree in our format.
+
+WINDOW-OR-FRAME must be nil, a frame, or a window. If it is nil,
+then the whole window split tree for `selected-frame' is returned.
+If it is a frame, then this is used instead. If it is a window,
+then the smallest tree containing that window is returned."
+ (when window-or-frame
+ (unless (or (framep window-or-frame)
+ (windowp window-or-frame))
+ (error "Not a frame or window: %s" window-or-frame)))
+ (let ((subtree (bw-find-tree-sub window-or-frame)))
+ (when subtree
+ (if (integerp subtree)
+ nil
+ (bw-get-tree-1 subtree)))))
+
+(defun bw-get-tree-1 (split)
+ (if (windowp split)
+ split
+ (let ((dir (car split))
+ (edges (car (cdr split)))
+ (childs (cdr (cdr split))))
+ (list
+ (cons 'dir (if dir 'ver 'hor))
+ (cons 'b (nth 3 edges))
+ (cons 'r (nth 2 edges))
+ (cons 't (nth 1 edges))
+ (cons 'l (nth 0 edges))
+ (cons 'childs (mapcar #'bw-get-tree-1 childs))))))
+
+(defun bw-find-tree-sub (window-or-frame &optional get-parent)
+ (let* ((window (when (windowp window-or-frame) window-or-frame))
+ (frame (when (windowp window) (window-frame window)))
+ (wt (car (window-tree frame))))
+ (when (< 1 (length (window-list frame 0)))
+ (if window
+ (bw-find-tree-sub-1 wt window get-parent)
+ wt))))
+
+(defun bw-find-tree-sub-1 (tree win &optional get-parent)
+ (unless (windowp win) (error "Not a window: %s" win))
+ (if (memq win tree)
+ (if get-parent
+ get-parent
+ tree)
+ (let ((childs (cdr (cdr tree)))
+ child
+ subtree)
+ (while (and childs (not subtree))
+ (setq child (car childs))
+ (setq childs (cdr childs))
+ (when (and child (listp child))
+ (setq subtree (bw-find-tree-sub-1 child win get-parent))))
+ (if (integerp subtree)
+ (progn
+ (if (= 1 subtree)
+ tree
+ (1- subtree)))
+ subtree
+ ))))
+
+;;; Window or object edges
+
+(defun bw-l (obj)
+ "Left edge of OBJ."
+ (if (windowp obj) (nth 0 (window-edges obj)) (cdr (assq 'l obj))))
+(defun bw-t (obj)
+ "Top edge of OBJ."
+ (if (windowp obj) (nth 1 (window-edges obj)) (cdr (assq 't obj))))
+(defun bw-r (obj)
+ "Right edge of OBJ."
+ (if (windowp obj) (nth 2 (window-edges obj)) (cdr (assq 'r obj))))
+(defun bw-b (obj)
+ "Bottom edge of OBJ."
+ (if (windowp obj) (nth 3 (window-edges obj)) (cdr (assq 'b obj))))
+
+;;; Split directions
+
+(defun bw-dir (obj)
+ "Return window split tree direction if OBJ.
+If OBJ is a window return 'both. If it is a window split tree
+then return its direction."
+ (if (symbolp obj)
+ obj
+ (if (windowp obj)
+ 'both
+ (let ((dir (cdr (assq 'dir obj))))
+ (unless (memq dir '(hor ver both))
+ (error "Can't find dir in %s" obj))
+ dir))))
+
+(defun bw-eqdir (obj1 obj2)
+ "Return t if window split tree directions are equal.
+OBJ1 and OBJ2 should be either windows or window split trees in
+our format. The directions returned by `bw-dir' are compared and
+t is returned if they are `eq' or one of them is 'both."
+ (let ((dir1 (bw-dir obj1))
+ (dir2 (bw-dir obj2)))
+ (or (eq dir1 dir2)
+ (eq dir1 'both)
+ (eq dir2 'both))))
+
+;;; Building split tree
+
+(defun bw-refresh-edges (obj)
+ "Refresh the edge information of OBJ and return OBJ."
+ (unless (windowp obj)
+ (let ((childs (cdr (assq 'childs obj)))
+ (ol 1000)
+ (ot 1000)
+ (or -1)
+ (ob -1))
+ (dolist (o childs)
+ (when (> ol (bw-l o)) (setq ol (bw-l o)))
+ (when (> ot (bw-t o)) (setq ot (bw-t o)))
+ (when (< or (bw-r o)) (setq or (bw-r o)))
+ (when (< ob (bw-b o)) (setq ob (bw-b o))))
+ (setq obj (delq 'l obj))
+ (setq obj (delq 't obj))
+ (setq obj (delq 'r obj))
+ (setq obj (delq 'b obj))
+ (add-to-list 'obj (cons 'l ol))
+ (add-to-list 'obj (cons 't ot))
+ (add-to-list 'obj (cons 'r or))
+ (add-to-list 'obj (cons 'b ob))
+ ))
+ obj)
+
+;;; Balance windows
+
+(defun balance-windows (&optional window-or-frame)
+ "Make windows the same heights or widths in window split subtrees.
+
+When called non-interactively WINDOW-OR-FRAME may be either a
+window or a frame. It then balances the windows on the implied
+frame. If the parameter is a window only the corresponding window
+subtree is balanced."
(interactive)
- (let ((count -1) levels newsizes level-size
- ;; Don't count the lines that are above the uppermost windows.
- ;; (These are the menu bar lines, if any.)
- (mbl (nth 1 (window-edges (frame-first-window (selected-frame)))))
- (last-window (previous-window (frame-first-window (selected-frame))))
- ;; Don't count the lines that are past the lowest main window.
- total)
- ;; Bottom edge of last window determines what size we have to work with.
- (setq total
- (+ (window-height last-window)
- (nth 1 (window-edges last-window))))
-
- ;; Find all the different vpos's at which windows start,
- ;; then count them. But ignore levels that differ by only 1.
- (let (tops (prev-top -2))
- (walk-windows (function (lambda (w)
- (setq tops (cons (nth 1 (window-edges w))
- tops))))
- 'nomini)
- (setq tops (sort tops '<))
- (while tops
- (if (> (car tops) (1+ prev-top))
- (setq prev-top (car tops)
- count (1+ count)))
- (setq levels (cons (cons (car tops) count) levels))
- (setq tops (cdr tops)))
- (setq count (1+ count)))
- ;; Subdivide the frame into desired number of vertical levels.
- (setq level-size (/ (- total mbl) count))
- (save-selected-window
- ;; Set up NEWSIZES to map windows to their desired sizes.
- ;; If a window ends at the bottom level, don't include
- ;; it in NEWSIZES. Those windows get the right sizes
- ;; by adjusting the ones above them.
- (walk-windows (function
- (lambda (w)
- (let ((newtop (cdr (assq (nth 1 (window-edges w))
- levels)))
- (newbot (cdr (assq (+ (window-height w)
- (nth 1 (window-edges w)))
- levels))))
- (if newbot
- (setq newsizes
- (cons (cons w (* level-size (- newbot newtop)))
- newsizes))))))
- 'nomini)
- ;; Make walk-windows start with the topmost window.
- (select-window (previous-window (frame-first-window (selected-frame))))
- (let (done (count 0))
- ;; Give each window its precomputed size, or at least try.
- ;; Keep trying until they all get the intended sizes,
- ;; but not more than 3 times (to prevent infinite loop).
- (while (and (not done) (< count 3))
- (setq done t)
- (setq count (1+ count))
- (walk-windows (function (lambda (w)
- (select-window w)
- (let ((newsize (cdr (assq w newsizes))))
- (when newsize
- (enlarge-window (- newsize
- (window-height))
- nil t)
- (unless (= (window-height) newsize)
- (setq done nil))))))
- 'nomini))))))
+ (let (
+ (wt (bw-get-tree window-or-frame))
+ (w)
+ (h)
+ (tried-sizes)
+ (last-sizes)
+ (windows (window-list nil 0))
+ (counter 0))
+ (when wt
+ (while (not (member last-sizes tried-sizes))
+ (when last-sizes (setq tried-sizes (cons last-sizes tried-sizes)))
+ (setq last-sizes (mapcar (lambda (w)
+ (window-edges w))
+ windows))
+ (when (eq 'hor (bw-dir wt))
+ (setq w (- (bw-r wt) (bw-l wt))))
+ (when (eq 'ver (bw-dir wt))
+ (setq h (- (bw-b wt) (bw-t wt))))
+ (bw-balance-sub wt w h)))))
+
+(defun bw-adjust-window (window delta horizontal)
+ "Wrapper around `adjust-window-trailing-edge' with error checking.
+Arguments WINDOW, DELTA and HORIZONTAL are passed on to that function."
+ ;; `adjust-window-trailing-edge' may fail if delta is too large.
+ (while (>= (abs delta) 1)
+ (condition-case err
+ (progn
+ (adjust-window-trailing-edge window delta horizontal)
+ (setq delta 0))
+ (error
+ ;;(message "adjust: %s" (error-message-string err))
+ (setq delta (/ delta 2))))))
+
+(defun bw-balance-sub (wt w h)
+ (setq wt (bw-refresh-edges wt))
+ (unless w (setq w (- (bw-r wt) (bw-l wt))))
+ (unless h (setq h (- (bw-b wt) (bw-t wt))))
+ (if (windowp wt)
+ (progn
+ (when w
+ (let ((dw (- w (- (bw-r wt) (bw-l wt)))))
+ (when (/= 0 dw)
+ (bw-adjust-window wt dw t))))
+ (when h
+ (let ((dh (- h (- (bw-b wt) (bw-t wt)))))
+ (when (/= 0 dh)
+ (bw-adjust-window wt dh nil)))))
+ (let* ((childs (cdr (assq 'childs wt)))
+ (lastchild (car (last childs)))
+ (cw (when w (/ w (if (bw-eqdir 'hor wt) (length childs) 1))))
+ (ch (when h (/ h (if (bw-eqdir 'ver wt) (length childs) 1)))))
+ (dolist (c childs)
+ (bw-balance-sub c cw ch)))))
+
+;;; A different solution to balance-windows
+
+(defun window-fixed-size-p (&optional window direction)
+ "Non-nil if WINDOW cannot be resized in DIRECTION.
+DIRECTION can be nil (i.e. any), `height' or `width'."
+ (with-current-buffer (window-buffer window)
+ (let ((fixed (and (boundp 'window-size-fixed) window-size-fixed)))
+ (when fixed
+ (not (and direction
+ (member (cons direction window-size-fixed)
+ '((height . width) (width . height)))))))))
+
+(defvar window-area-factor 1
+ "Factor by which the window area should be over-estimated.
+This is used by `balance-windows-area'.
+Changing this globally has no effect.")
+
+(defun balance-windows-area ()
+ "Make all visible windows the same area (approximately).
+See also `window-area-factor' to change the relative size of specific buffers."
+ (interactive)
+ (let* ((unchanged 0) (carry 0) (round 0)
+ ;; Remove fixed-size windows.
+ (wins (delq nil (mapcar (lambda (win)
+ (if (not (window-fixed-size-p win)) win))
+ (window-list nil 'nomini))))
+ (changelog nil)
+ next)
+ ;; Resizing a window changes the size of surrounding windows in complex
+ ;; ways, so it's difficult to balance them all. The introduction of
+ ;; `adjust-window-trailing-edge' made it a bit easier, but it is still
+ ;; very difficult to do. `balance-window' above takes an off-line
+ ;; approach: get the whole window tree, then balance it, then try to
+ ;; adjust the windows so they fit the result.
+ ;; Here, instead, we take a "local optimization" approach, where we just
+ ;; go through all the windows several times until nothing needs to be
+ ;; changed. The main problem with this approach is that it's difficult
+ ;; to make sure it terminates, so we use some heuristic to try and break
+ ;; off infinite loops.
+ ;; After a round without any change, we allow a second, to give a chance
+ ;; to the carry to propagate a minor imbalance from the end back to
+ ;; the beginning.
+ (while (< unchanged 2)
+ ;; (message "New round")
+ (setq unchanged (1+ unchanged) round (1+ round))
+ (dolist (win wins)
+ (setq next win)
+ (while (progn (setq next (next-window next))
+ (window-fixed-size-p next)))
+ ;; (assert (eq next (or (cadr (member win wins)) (car wins))))
+ (let* ((horiz
+ (< (car (window-edges win)) (car (window-edges next))))
+ (areadiff (/ (- (* (window-height next) (window-width next)
+ (buffer-local-value 'window-area-factor
+ (window-buffer next)))
+ (* (window-height win) (window-width win)
+ (buffer-local-value 'window-area-factor
+ (window-buffer win))))
+ (max (buffer-local-value 'window-area-factor
+ (window-buffer win))
+ (buffer-local-value 'window-area-factor
+ (window-buffer next)))))
+ (edgesize (if horiz
+ (+ (window-height win) (window-height next))
+ (+ (window-width win) (window-width next))))
+ (diff (/ areadiff edgesize)))
+ (when (zerop diff)
+ ;; Maybe diff is actually closer to 1 than to 0.
+ (setq diff (/ (* 3 areadiff) (* 2 edgesize))))
+ (when (and (zerop diff) (not (zerop areadiff)))
+ (setq diff (/ (+ areadiff carry) edgesize))
+ ;; Change things smoothly.
+ (if (or (> diff 1) (< diff -1)) (setq diff (/ diff 2))))
+ (if (zerop diff)
+ ;; Make sure negligible differences don't accumulate to
+ ;; become significant.
+ (setq carry (+ carry areadiff))
+ (bw-adjust-window win diff horiz)
+ ;; (sit-for 0.5)
+ (let ((change (cons win (window-edges win))))
+ ;; If the same change has been seen already for this window,
+ ;; we're most likely in an endless loop, so don't count it as
+ ;; a change.
+ (unless (member change changelog)
+ (push change changelog)
+ (setq unchanged 0 carry 0)))))))
+ ;; We've now basically balanced all the windows.
+ ;; But there may be some minor off-by-one imbalance left over,
+ ;; so let's do some fine tuning.
+ ;; (bw-finetune wins)
+ ;; (message "Done in %d rounds" round)
+ ))
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
\f
;; I think this should be the default; I think people will prefer it--rms.
(defcustom split-window-keep-point t
This option applies only to `split-window-vertically' and
functions that call it. `split-window' always keeps the original
-point in both children,"
+point in both children."
:type 'boolean
:group 'windows)
lines than are actually needed in the case where some error may be present."
(let ((delta (- height (window-text-height window))))
(unless (zerop delta)
- (let ((window-min-height 1))
+ ;; Setting window-min-height to a value like 1 can lead to very
+ ;; bizarre displays because it also allows Emacs to make *other*
+ ;; windows 1-line tall, which means that there's no more space for
+ ;; the modeline.
+ (let ((window-min-height (min 2 height))) ;One text line plus a modeline.
(if (and window (not (eq window (selected-window))))
(save-selected-window
(select-window window)
(1+ (vertical-motion (buffer-size) window))))))
(defun fit-window-to-buffer (&optional window max-height min-height)
- "Make WINDOW the right size to display its contents exactly.
+ "Make WINDOW the right height to display its contents exactly.
If WINDOW is omitted or nil, it defaults to the selected window.
If the optional argument MAX-HEIGHT is supplied, it is the maximum height
the window is allowed to be, defaulting to the frame height.
;; desired-height lines, constrained by MIN-HEIGHT and MAX-HEIGHT.
(- (max (min desired-height max-height)
(or min-height window-min-height))
- window-height))
- ;; We do our own height checking, so avoid any restrictions due to
- ;; window-min-height.
- (window-min-height 1))
+ window-height)))
;; Don't try to redisplay with the cursor at the end
;; on its own line--that would force a scroll and spoil things.
"Kill the current buffer and delete the selected window."
(interactive)
(let ((window-to-delete (selected-window))
+ (buffer-to-kill (current-buffer))
(delete-window-hook (lambda ()
(condition-case nil
(delete-window)
(error nil)))))
- (add-hook 'kill-buffer-hook delete-window-hook t t)
- (if (kill-buffer (current-buffer))
- ;; If `delete-window' failed before, we rerun it to regenerate
- ;; the error so it can be seen in the minibuffer.
- (when (eq (selected-window) window-to-delete)
- (delete-window))
- (remove-hook 'kill-buffer-hook delete-window-hook t))))
+ (unwind-protect
+ (progn
+ (add-hook 'kill-buffer-hook delete-window-hook t t)
+ (if (kill-buffer (current-buffer))
+ ;; If `delete-window' failed before, we rerun it to regenerate
+ ;; the error so it can be seen in the echo area.
+ (when (eq (selected-window) window-to-delete)
+ (delete-window))))
+ ;; If the buffer is not dead for some reason (probably because
+ ;; of a `quit' signal), remove the hook again.
+ (condition-case nil
+ (with-current-buffer buffer-to-kill
+ (remove-hook 'kill-buffer-hook delete-window-hook t))
+ (error nil)))))
(defun quit-window (&optional kill window)
"Quit the current buffer. Bury it, and maybe delete the selected frame.
;; Maybe get rid of the window.
(and window (not window-handled) (not window-solitary)
(delete-window window))))
+\f
+(defvar mouse-autoselect-window-timer nil
+ "Timer used by delayed window autoselection.")
+
+(defvar mouse-autoselect-window-position nil
+ "Last mouse position recorded by delayed window autoselection.")
+
+(defvar mouse-autoselect-window-window nil
+ "Last window recorded by delayed window autoselection.")
+
+(defvar mouse-autoselect-window-state nil
+ "When non-nil, special state of delayed window autoselection.
+Possible values are `suspend' \(suspend autoselection after a menu or
+scrollbar interaction\) and `select' \(the next invocation of
+'handle-select-window' shall select the window immediately\).")
+
+(defun mouse-autoselect-window-cancel (&optional force)
+ "Cancel delayed window autoselection.
+Optional argument FORCE means cancel unconditionally."
+ (unless (and (not force)
+ ;; Don't cancel while the user drags a scroll bar.
+ (eq this-command 'scroll-bar-toolkit-scroll)
+ (memq (nth 4 (event-end last-input-event))
+ '(handle end-scroll)))
+ (setq mouse-autoselect-window-state nil)
+ (when (timerp mouse-autoselect-window-timer)
+ (cancel-timer mouse-autoselect-window-timer))
+ (remove-hook 'pre-command-hook 'mouse-autoselect-window-cancel)))
+
+(defun mouse-autoselect-window-start (mouse-position &optional window suspend)
+ "Start delayed window autoselection.
+MOUSE-POSITION is the last position where the mouse was seen as returned
+by `mouse-position'. Optional argument WINDOW non-nil denotes the
+window where the mouse was seen. Optional argument SUSPEND non-nil
+means suspend autoselection."
+ ;; Record values for MOUSE-POSITION, WINDOW, and SUSPEND.
+ (setq mouse-autoselect-window-position mouse-position)
+ (when window (setq mouse-autoselect-window-window window))
+ (setq mouse-autoselect-window-state (when suspend 'suspend))
+ ;; Install timer which runs `mouse-autoselect-window-select' after
+ ;; `mouse-autoselect-window' seconds.
+ (setq mouse-autoselect-window-timer
+ (run-at-time
+ (abs mouse-autoselect-window) nil 'mouse-autoselect-window-select)))
+
+(defun mouse-autoselect-window-select ()
+ "Select window with delayed window autoselection.
+If the mouse position has stabilized in a non-selected window, select
+that window. The minibuffer window is selected only if the minibuffer is
+active. This function is run by `mouse-autoselect-window-timer'."
+ (condition-case nil
+ (let* ((mouse-position (mouse-position))
+ (window
+ (condition-case nil
+ (window-at (cadr mouse-position) (cddr mouse-position)
+ (car mouse-position))
+ (error nil))))
+ (cond
+ ((or (menu-or-popup-active-p)
+ (and window
+ (not (coordinates-in-window-p (cdr mouse-position) window))))
+ ;; A menu / popup dialog is active or the mouse is on the scroll-bar
+ ;; of WINDOW, temporarily suspend delayed autoselection.
+ (mouse-autoselect-window-start mouse-position nil t))
+ ((eq mouse-autoselect-window-state 'suspend)
+ ;; Delayed autoselection was temporarily suspended, reenable it.
+ (mouse-autoselect-window-start mouse-position))
+ ((and window (not (eq window (selected-window)))
+ (or (not (numberp mouse-autoselect-window))
+ (and (> mouse-autoselect-window 0)
+ ;; If `mouse-autoselect-window' is positive, select
+ ;; window if the window is the same as before.
+ (eq window mouse-autoselect-window-window))
+ ;; Otherwise select window if the mouse is at the same
+ ;; position as before. Observe that the first test after
+ ;; starting autoselection usually fails since the value of
+ ;; `mouse-autoselect-window-position' recorded there is the
+ ;; position where the mouse has entered the new window and
+ ;; not necessarily where the mouse has stopped moving.
+ (equal mouse-position mouse-autoselect-window-position))
+ ;; The minibuffer is a candidate window if it's active.
+ (or (not (window-minibuffer-p window))
+ (eq window (active-minibuffer-window))))
+ ;; Mouse position has stabilized in non-selected window: Cancel
+ ;; delayed autoselection and try to select that window.
+ (mouse-autoselect-window-cancel t)
+ ;; Select window where mouse appears unless the selected window is the
+ ;; minibuffer. Use `unread-command-events' in order to execute pre-
+ ;; and post-command hooks and trigger idle timers. To avoid delaying
+ ;; autoselection again, set `mouse-autoselect-window-state'."
+ (unless (window-minibuffer-p (selected-window))
+ (setq mouse-autoselect-window-state 'select)
+ (setq unread-command-events
+ (cons (list 'select-window (list window))
+ unread-command-events))))
+ ((or (and window (eq window (selected-window)))
+ (not (numberp mouse-autoselect-window))
+ (equal mouse-position mouse-autoselect-window-position))
+ ;; Mouse position has either stabilized in the selected window or at
+ ;; `mouse-autoselect-window-position': Cancel delayed autoselection.
+ (mouse-autoselect-window-cancel t))
+ (t
+ ;; Mouse position has not stabilized yet, resume delayed
+ ;; autoselection.
+ (mouse-autoselect-window-start mouse-position window))))
+ (error nil)))
(defun handle-select-window (event)
"Handle select-window events."
(interactive "e")
(let ((window (posn-window (event-start event))))
- (if (and (window-live-p window)
- ;; Don't switch if we're currently in the minibuffer.
- ;; This tries to work around problems where the minibuffer gets
- ;; unselected unexpectedly, and where you then have to move
- ;; your mouse all the way down to the minibuffer to select it.
- (not (window-minibuffer-p (selected-window)))
- ;; Don't switch to a minibuffer window unless it's active.
- (or (not (window-minibuffer-p window))
- (minibuffer-window-active-p window)))
- (select-window window))))
+ (when (and (window-live-p window)
+ ;; Don't switch if we're currently in the minibuffer.
+ ;; This tries to work around problems where the minibuffer gets
+ ;; unselected unexpectedly, and where you then have to move
+ ;; your mouse all the way down to the minibuffer to select it.
+ (not (window-minibuffer-p (selected-window)))
+ ;; Don't switch to a minibuffer window unless it's active.
+ (or (not (window-minibuffer-p window))
+ (minibuffer-window-active-p window)))
+ (unless (and (numberp mouse-autoselect-window)
+ (not (zerop mouse-autoselect-window))
+ (not (eq mouse-autoselect-window-state 'select))
+ (progn
+ ;; Cancel any delayed autoselection.
+ (mouse-autoselect-window-cancel t)
+ ;; Start delayed autoselection from current mouse position
+ ;; and window.
+ (mouse-autoselect-window-start (mouse-position) window)
+ ;; Executing a command cancels delayed autoselection.
+ (add-hook
+ 'pre-command-hook 'mouse-autoselect-window-cancel)))
+ ;; Reset state of delayed autoselection.
+ (setq mouse-autoselect-window-state nil)
+ (when mouse-autoselect-window
+ ;; Run `mouse-leave-buffer-hook' when autoselecting window.
+ (run-hooks 'mouse-leave-buffer-hook))
+ (select-window window)))))
(define-key ctl-x-map "2" 'split-window-vertically)
(define-key ctl-x-map "3" 'split-window-horizontally)
HCoop / bpt / emacs.git / blobdiff