#!/bin/sh
### make-dist: create an Emacs distribution tar file from current srcdir
-## Copyright (C) 1995, 1997, 1998, 2000, 2001, 2002, 2003, 2004, 2005,
-## 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+## Copyright (C) 1995, 1997-1998, 2000-2012 Free Software Foundation, Inc.
## This file is part of GNU Emacs.
check=yes
clean_up=no
make_tar=no
+default_gzip=gzip
newer=""
while [ $# -gt 0 ]; do
new_extension=".new"
shift
;;
- ## This option tells make-dist to use `compress' instead of gzip.
- ## Normally, make-dist uses gzip whenever it is present.
- "--compress")
- default_gzip="compress"
- ;;
- ## Same with bzip2.
+ ## This option tells make-dist to use `bzip2' instead of gzip.
"--bzip2")
default_gzip="bzip2"
;;
echo ""
echo " --bzip2 use bzip2 instead of gzip"
echo " --clean-up delete staging directories when done"
- echo " --compress use compress instead of gzip"
echo " --lzma use lzma instead of gzip"
echo " --newer=TIME don't include files older than TIME"
echo " --no-check don't check for bad file names etc."
### (Accept only absolute file names.)
if [ $update = yes ];
then
- unset EMACS_UNIBYTE
if [ -f src/emacs ];
then
EMACS=`pwd`/src/emacs
fi
### Find out which version of Emacs this is.
-shortversion=`grep 'char emacs_version' src/emacs.c \
- | sed -e 's/^.*"\([0-9][0-9]*\.[0-9][0-9]*\).*$/\1/'`
-version=`grep 'char emacs_version' src/emacs.c \
- | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
+version=`
+ sed -n 's/^AC_INIT(emacs,[ ]*\([^ )]*\).*/\1/p' <configure.in
+` || version=
if [ ! "${version}" ]; then
echo "${progname}: can't find current Emacs version in \`./src/emacs.c'" >&2
exit 1
fi
-echo Version numbers are $version and $shortversion
+echo Version number is $version
-if [ $update = yes ];
-then
- if grep -s "@set EMACSVER *${shortversion}" ./doc/emacs/emacsver.texi > /dev/null; then
- true
- else
- echo "You must update the version number in \`./doc/emacs/emacsver.texi'"
+if [ $update = yes ]; then
+ if ! grep -q "@set EMACSVER *${version}" doc/emacs/emacsver.texi || \
+ ! grep -q "tree holds version *${version}" README; then
+ echo "WARNING: README and/or emacsver.texi have the wrong version number"
+ echo "Consider running M-x set-version from admin/admin.el"
sleep 5
fi
fi
exit 1
fi
-### Find where to run Emacs.
-if [ $check = yes ];
-then
- ### Check for .elc files with no corresponding .el file.
+if [ $check = yes ]; then
ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \
lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- leim/[a-z]*/[a-z]*.el | sed 's/\.el$/.elc/' > /tmp/el
+ leim/[a-z]*/[a-z]*.el > /tmp/el
+
ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \
lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.elc \
lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.elc \
leim/[a-z]*/[a-z]*.elc > /tmp/elc
- bogosities="`comm -13 /tmp/el /tmp/elc`"
- if [ "${bogosities}" != "" ]; then
+
+ ## Check for .elc files with no corresponding .el file.
+ sed 's/\.el$/.elc/' /tmp/el > /tmp/elelc
+
+ bogosities="`comm -13 /tmp/elelc /tmp/elc`"
+ if [ x"${bogosities}" != x"" ]; then
echo "The following .elc files have no corresponding .el files:"
echo "${bogosities}"
fi
- rm -f /tmp/el /tmp/elc
### Check for .el files with no corresponding .elc file.
- ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \
- lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- leim/[a-z]*/[a-z]*.el > /tmp/el
- ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \
- lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- leim/[a-z]*/[a-z]*.elc | sed 's/\.elc$/.el/' > /tmp/elc
- losers="`comm -23 /tmp/el /tmp/elc`"
+ sed 's/\.elc$/.el/' /tmp/elc > /tmp/elcel
+ losers="`comm -23 /tmp/el /tmp/elcel`"
+
+ rm -f /tmp/el /tmp/elc /tmp/elcel /tmp/elelc
+
bogosities=
for file in $losers; do
- if ! grep -q "no-byte-compile: t" $file; then
- case $file in
- site-init.el | site-load.el | site-start.el | default.el)
- ;;
- *)
- bogosities="$file $bogosities"
- ;;
- esac
- fi
+ grep -q "no-byte-compile: t" $file && continue
+ case $file in
+ site-init.el | site-load.el | site-start.el | default.el) continue ;;
+ esac
+
+ bogosities="$file $bogosities"
+
done
if [ x"${bogosities}" != x"" ]; then
echo "The following .el files have no corresponding .elc files:"
echo "${bogosities}"
fi
- rm -f /tmp/el /tmp/elc
fi
-### Make sure configure is newer than configure.in.
-if [ "x`ls -t configure configure.in | sed q`" != "xconfigure" ]; then
- echo "\`./configure.in' is newer than \`./configure'" >&2
- echo "Running autoconf" >&2
- autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; }
-fi
+if [ $update = yes ]; then
-### Make sure src/stamp-h.in is newer than configure.in.
-if [ "x`ls -t src/stamp-h.in configure.in | sed q`" != "xsrc/stamp-h.in" ]; then
- echo "\`./configure.in' is newer than \`./src/stamp-h.in'" >&2
- echo "Running autoheader" >&2
- autoheader || { x=$?; echo Autoheader FAILED! >&2; exit $x; }
- rm -f src/stamp-h.in
- echo timestamp > src/stamp-h.in
-fi
+ ## Make sure configure is newer than configure.in.
+ if [ "x`ls -t configure configure.in | sed q`" != "xconfigure" ]; then
+ echo "\`./configure.in' is newer than \`./configure'" >&2
+ echo "Running autoconf" >&2
+ autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; }
+ fi
+
+ ## Make sure src/stamp-h.in is newer than configure.in.
+ if [ "x`ls -t src/stamp-h.in configure.in | sed q`" != "xsrc/stamp-h.in" ]; then
+ echo "\`./configure.in' is newer than \`./src/stamp-h.in'" >&2
+ echo "Running autoheader" >&2
+ autoheader || { x=$?; echo Autoheader FAILED! >&2; exit $x; }
+ rm -f src/stamp-h.in
+ echo timestamp > src/stamp-h.in
+ fi
-if [ $update = yes ];
-then
echo "Updating Info files"
(cd doc/emacs; make info)
(cd doc/misc; make info)
echo "Recompiling Lisp files"
$EMACS -batch -f batch-byte-recompile-directory lisp leim
-fi
-
-## What is this file for? It goes in srcdir, not the tarfile.
-## Why does it exclude term/ ?
-echo "Making lisp/MANIFEST"
-
-files=`find lisp -type f -name '*.el'`
-for file in $files; do
- case "$file" in
- */subdirs.el|*/default.el|*/loaddefs.el|*/term/*) continue ;;
- esac
- sed -n 's/^;;; //p; q' $file
-done | sort > lisp/MANIFEST
+fi # $update = yes
echo "Creating staging directory: \`${tempparent}'"
### This trap ensures that the staging directory will be cleaned up even
### when the script is interrupted in mid-career.
if [ "${clean_up}" = yes ]; then
- trap "echo 'Interrupted...cleaning up the staging directory'; rm -rf ${tempparent}; exit 1" 1 2 15
+ trap "echo 'Cleaning up the staging directory'; rm -rf ${tempparent}" EXIT
fi
echo "Creating top directory: \`${tempdir}'"
### tar file; this means that people can start reading the INSTALL and
### README while the rest of the tar file is still unpacking. Whoopee.
echo "Making links to top-level files"
-ln INSTALL README BUGS move-if-change ${tempdir}
+ln INSTALL README BUGS ${tempdir}
ln ChangeLog Makefile.in configure configure.in ${tempdir}
ln config.bat make-dist update-subdirs vpath.sed .dir-locals.el ${tempdir}
-ln mkinstalldirs config.sub config.guess install-sh ${tempdir}
-
-## FIXME why do we bother doing this? set-version in admin/admin.el
-## does this, and more besides.
-echo "Updating version number in README"
-(cd ${tempdir}
- awk \
- '$1 " " $2 " " $3 " " $4 " " $5 == "This directory tree holds version" { $6 = version; print $0 }
- $1 " " $2 " " $3 " " $4 " " $5 != "This directory tree holds version"' \
- version=${version} README > tmp.README
- mv -f tmp.README README)
-
+ln aclocal.m4 ${tempdir}
echo "Creating subdirectories"
for subdir in site-lisp \
leim leim/CXTERM-DIC leim/MISC-DIC \
leim/SKK-DIC leim/ja-dic leim/quail \
- src src/m src/s src/bitmaps lib-src oldXMenu lwlib \
+ build-aux build-aux/snippet \
+ src src/m src/s src/bitmaps lib lib-src oldXMenu lwlib \
nt nt/inc nt/inc/sys nt/inc/arpa nt/inc/netinet nt/icons \
- `find etc lisp -type d` \
+ `find etc lisp admin -type d` \
doc doc/emacs doc/misc doc/man doc/lispref doc/lispintro \
info m4 msdos \
nextstep nextstep/Cocoa nextstep/Cocoa/Emacs.base \
nextstep/Cocoa/Emacs.base/Contents \
nextstep/Cocoa/Emacs.base/Contents/Resources \
nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj \
- nextstep/Cocoa/Emacs.xcodeproj \
nextstep/GNUstep \
nextstep/GNUstep/Emacs.base \
nextstep/GNUstep/Emacs.base/Resources
rm -f ../${tempdir}/leim/quail/tsang-b5.*
rm -f ../${tempdir}/leim/quail/tsang-cns.*)
+echo "Making links to \`build-aux'"
+(cd build-aux
+ ln compile config.guess config.sub depcomp ../${tempdir}/build-aux
+ ln install-sh missing move-if-change ../${tempdir}/build-aux)
+
+echo "Making links to \`build-aux/snippet'"
+(cd build-aux/snippet
+ ln *.h ../../${tempdir}/build-aux/snippet)
+
echo "Making links to \`src'"
### Don't distribute the configured versions of
### config.in, paths.in, buildobj.h, or Makefile.in.
ln makefile.w32-in ../${tempdir}/src
ln .gdbinit .dbxinit ../${tempdir}/src
cd ../${tempdir}/src
- rm -f config.h epaths.h Makefile buildobj.h)
+ rm -f globals.h config.h epaths.h Makefile buildobj.h)
echo "Making links to \`src/bitmaps'"
(cd src/bitmaps
(cd src/s
ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/s)
+echo "Making links to \`lib'"
+(snippet_h=`(cd build-aux/snippet && ls *.h)`
+ cd lib
+ ln [a-zA-Z]*.[ch] ../${tempdir}/lib
+ ln gnulib.mk Makefile.am Makefile.in makefile.w32-in ../${tempdir}/lib
+ cd ../${tempdir}/lib
+ script='/[*]/d; s/\.in\.h$/.h/'
+ rm -f `(echo "$snippet_h"; ls *.in.h) | sed "$script"`)
+
echo "Making links to \`lib-src'"
(cd lib-src
ln [a-zA-Z]*.[ch] ../${tempdir}/lib-src
ln ChangeLog Makefile.in README testfile vcdiff ../${tempdir}/lib-src
ln grep-changelog rcs2log rcs-checkin ../${tempdir}/lib-src
- ln makefile.w32-in ../${tempdir}/lib-src
- cd ../${tempdir}/lib-src
- rm -f getopt.h)
+ ln makefile.w32-in ../${tempdir}/lib-src)
echo "Making links to \`m4'"
(cd m4
ln *.m4 ../${tempdir}/m4)
+## Exclude README.W32 because it is specific to pre-built binaries(?).
echo "Making links to \`nt'"
(cd nt
ln emacs.manifest emacs.rc emacsclient.rc config.nt ../${tempdir}/nt
ln emacs-src.tags nmake.defs gmake.defs subdirs.el ../${tempdir}/nt
ln [a-z]*.bat [a-z]*.[ch] ../${tempdir}/nt
- ln ChangeLog INSTALL README README.W32 makefile.w32-in ../${tempdir}/nt)
+ ln ChangeLog INSTALL README makefile.w32-in ../${tempdir}/nt)
-echo "Making links to \`nt/inc'"
-(cd nt/inc
- ln [a-z]*.h ../../${tempdir}/nt/inc)
-
-echo "Making links to \`nt/inc/sys'"
-(cd nt/inc/sys
- ln [a-z]*.h ../../../${tempdir}/nt/inc/sys)
-
-echo "Making links to \`nt/inc/arpa'"
-(cd nt/inc/arpa
- ln [a-z]*.h ../../../${tempdir}/nt/inc/arpa)
-
-echo "Making links to \`nt/inc/netinet'"
-(cd nt/inc/netinet
- ln [a-z]*.h ../../../${tempdir}/nt/inc/netinet)
+echo "Making links to \`nt/inc' and its subdirectories"
+for f in `find nt/inc -type f -name '[a-z]*.h'`; do
+ ln $f $tempdir/$f
+done
echo "Making links to \`nt/icons'"
(cd nt/icons
echo "Making links to \`msdos'"
(cd msdos
ln ChangeLog INSTALL README emacs.ico emacs.pif ../${tempdir}/msdos
+ ln depfiles.bat inttypes.h ../${tempdir}/msdos
ln is_exec.c sigaction.c mainmake.v2 sed*.inp ../${tempdir}/msdos)
-## FIXME are DEV-NOTES and FOR-RELEASE appropriate?
echo "Making links to \`nextstep'"
(cd nextstep
- ln AUTHORS ChangeLog README INSTALL ../${tempdir}/nextstep)
+ ln ChangeLog README INSTALL ../${tempdir}/nextstep)
echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents'"
(cd nextstep/Cocoa/Emacs.base/Contents
(cd nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj
ln InfoPlist.strings ../../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj)
-echo "Making links to \`nextstep/Cocoa/Emacs.xcodeproj'"
-(cd nextstep/Cocoa/Emacs.xcodeproj
- ln project.pbxproj ../../../${tempdir}/nextstep/Cocoa/Emacs.xcodeproj)
-
echo "Making links to \`nextstep/GNUstep/Emacs.base/Resources'"
(cd nextstep/GNUstep/Emacs.base/Resources
ln Emacs.desktop Info-gnustep.plist README emacs.tiff ../../../../${tempdir}/nextstep/GNUstep/Emacs.base/Resources )
ln *.[ch] *.in ../${tempdir}/lwlib
ln README ChangeLog ../${tempdir}/lwlib)
+echo "Making links to \`admin' and its subdirectories"
+for f in `find admin -type f`; do
+ ln $f $tempdir/$f
+done
+
echo "Making links to \`etc' and its subdirectories"
for f in `find etc -type f`; do
case $f in
- etc/DOC*) continue ;;
+ etc/DOC*|etc/*.pyc) continue ;;
esac
ln $f $tempdir/$f
done
echo "Making links to \`info'"
-(cd info
- ln `find . -type f -print` ../${tempdir}/info)
+ln `find info -type f -print` ${tempdir}/info
echo "Making links to \`doc/emacs'"
(cd doc/emacs
### It would be nice if they could all be symlinks to top-level copy, but
### you're not supposed to have any symlinks in distribution tar files.
echo "Making sure copying notices are all copies of \`COPYING'"
-for subdir in . etc info leim lib-src lisp lwlib msdos nt src; do
+for subdir in . etc info leim lib lib-src lisp lwlib msdos nt src; do
rm -f ${tempdir}/${subdir}/COPYING
cp COPYING ${tempdir}/${subdir}
done
find ${tempparent} \( -name '*~' -o -name '#*#' -o -name '.*ignore' -o -name '=*' -o -name 'TAGS' \) -exec rm -f {} \;
if [ "${make_tar}" = yes ]; then
- if [ "${default_gzip}" = "" ]; then
- echo "Looking for gzip"
- temppath=`echo $PATH | sed 's/^:/.:/
- s/::/:.:/g
- s/:$/:./
- s/:/ /g'`
- default_gzip=`(
- for dir in ${temppath}; do
- if [ -f ${dir}/gzip ]; then echo 'gzip --best'; exit 0; fi
- done
- echo compress
- )`
+ echo "Looking for $default_gzip"
+ found=0
+ temppath=`echo $PATH | sed -e 's/^:/.:/' -e 's/::/:.:/g' -e 's/:$/:./' \
+ -e 's/:/ /g'`
+ for dir in ${temppath}; do
+ [ -x ${dir}/$default_gzip ] || continue
+ found=1; break
+ done
+ if [ "$found" = "0" ]; then
+ echo "WARNING: \`$default_gzip' not found, will not compress" >&2
+ default_gzip=cat
fi
case "${default_gzip}" in
- bzip2) gzip_extension=.bz2 ;;
- compress* ) gzip_extension=.Z ;;
- lzma) gzip_extension=.lzma ;;
- * ) gzip_extension=.gz ;;
+ bzip2) gzip_extension=.bz2 ;;
+ lzma) gzip_extension=.lzma ;;
+ gzip) gzip_extension=.gz ; default_gzip="gzip --best";;
+ *) gzip_extension= ;;
esac
echo "Creating tar file"
(cd ${tempparent} ; tar cvf - ${emacsname} ) \
> ${emacsname}.tar${gzip_extension}
fi
-if [ "${clean_up}" = yes ]; then
- echo "Cleaning up the staging directory"
- rm -rf ${tempparent}
-else
+if [ "${clean_up}" != yes ]; then
(cd ${tempparent}; mv ${emacsname} ..)
rm -rf ${tempparent}
fi
HCoop / bpt / emacs.git / blobdiff