1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
- * s/sol2.h: (SOLARIS_BROKEN_ACCESS): Don't define this.
+ * s/sol2.h (SOLARIS_BROKEN_ACCESS): Don't define this.
* s/aix3-2.h (C_SWITCH_SYSTEM): Don't define this to be "-ma" if
we're using GCC - that's an XLC switch.
screws up AIX.
(struct emacs_tty): Test those symbols, instead of the ioctl
commands.
- * sysdep.c (emacs_get_tty, emacs_set_tty, new_ltchars, new_tchars,
- init_sys_modes): Same.
+ * sysdep.c (emacs_get_tty, emacs_set_tty, new_ltchars, new_tchars)
+ (init_sys_modes): Same.
* config.h.in (HAVE_RENAME): Include an #undef for this, so
configure will have something to edit.
1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
- * s/hpux8.h (LIB_X11_LIB, C_SWITCH_SYSTEM, LD_SWITCH_SYSTEM,
- LD_SWITCH_SYSTEM, OLDXMENU_OPTIONS): Add X11R5 directories to the
+ * s/hpux8.h (LIB_X11_LIB, C_SWITCH_SYSTEM, LD_SWITCH_SYSTEM)
+ (LD_SWITCH_SYSTEM, OLDXMENU_OPTIONS): Add X11R5 directories to the
search paths in these lists; they shouldn't do any harm if they
don't have X11R5.
1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
* xfns.c: Clear out the old face stuff.
- (x_face_table, n_faces, x_set_face, x_set_glyph, Fx_set_face_font,
- Fx_set_face, Fx_get_face): Removed.
+ (x_face_table, n_faces, x_set_face, x_set_glyph, Fx_set_face_font)
+ (Fx_set_face, Fx_get_face): Removed.
(syms_of_xfns): Remove defsubr for Fx_set_face.
Arrange for font names to get fully resolved - no wildcards.
* xterm.c (x_new_font): Don't call init_frame_faces.
* xterm.h: New section for declarations for xfaces.c.
- (init_frame_faces, free_frame_faces, intern_face,
- face_name_id_number, same_size_fonts, recompute_basic_faces,
- compute_char_face, compute_glyph_face): Declare these here.
+ (init_frame_faces, free_frame_faces, intern_face)
+ (face_name_id_number, same_size_fonts, recompute_basic_faces)
+ (compute_char_face, compute_glyph_face): Declare these here.
* xfaces.c (same_size_fonts): We can now remove this extern
declaration.
* xfns.c (face_name_id_number): Likewise.
* xfns.c (Fx_list_fonts): Remember that FACE may not have a font
specified. Don't specify 30000 as the maximum limit on the number
- of fontns returned - 2000 is more reasonable.
+ of fonts returned - 2000 is more reasonable.
* xfaces.c (build_face, unload_font, free_frame_faces): Don't
forget to block input while making X calls.
already declares this elsewhere.
(PTY_TTY_NAME_SPRINTF): #undef this before re-#defining it.
* m/ibmps2-aix.h, m/pfa50.h, s/hpux.h, s/isc2-2.h, s/linux.h,
- s/sco4.h, s/usg5-4.h: Remove HAVE_RENAME; configure guesses that now.
+ * s/sco4.h, s/usg5-4.h: Remove HAVE_RENAME; configure guesses that now.
* config.h.in (LD_SWITCH_X_SITE, C_SWITCH_X_SITE): Change the
#defines to #undef's, so ../configure knows it should tweak them.
* xfaces.c (Fset_face_attribute_internal): Don't free the frame's
normal_gc or reverse_gc.
- * keyboard.c (make_lispy_movement): Deal properly with mouse
+ * keyboard.c (make_lispy_movement): Deal properly with mouse
motion outside of all windows.
* lisp.h (GLYPH_FACE): Remember that the face portion of a glyph
1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
- * Version 19.7 released.
+ * Version 19.7 released.
* Makefile.in (SUBMAKEFLAGS): Add CFLAGS to the list.
only have the h_addr field in their struct hostent.
* systty.h [SYSV_PTYS]: #include <sys/types.h>. Francesco
- Potort
i` <pot@fly.CNUCE.CNR.IT> says it's necessary on his
+ Potort
ì <pot@fly.CNUCE.CNR.IT> says it's necessary on his
machine, and it should be harmless.
1993-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* ymakefile (alloca.o): #define malloc and free to be xmalloc and
xfree on the command line of this compilation.
- * s/sco4.h: (TIME_WITH_SYS_TIME): This is no longer needed.
+ * s/sco4.h (TIME_WITH_SYS_TIME): This is no longer needed.
* s/linux.h: Remove copyright notices by Michael K. Johnson and
Rik Faith. They have both sent in papers now which make their
clear_waiting_for_input when we exit the loop because process
input has arrived.
- Changes for Silicon Graphics Iris 5D.
+ Changes for Silicon Graphics Iris 5D.
* unexelfsgi.c: New file; like unexelf.c, but tolerates program
segments above BSS.
* m/iris5d.h: New file.
then load it; we can just take advantage of the PATH_DUMPLOADSEARCH.
(crt0.o): Remember that crt0.c is in ${srcdir}.
- Install David Mackenzie's patches to make ${srcdir} work.
+ Install David Mackenzie's patches to make ${srcdir} work.
* Makefile.in (srcdir, VPATH): Get this value from the top-level
Makefile.
(xmakefile): Use ${srcdir} to find the files from which we produce
1993-05-14 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
- * buffer.c (Foverlay_start, Foverlay_end, Foverlay_buffer,
- Foverlay_properties): Functions moved here from subr.el.
+ * buffer.c (Foverlay_start, Foverlay_end, Foverlay_buffer)
+ (Foverlay_properties): Functions moved here from subr.el.
1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
* buffer.c (Foverlay_get): Return Qnil if the requested property
is missing from the property list.
- The text property routines can now modify buffers other
+ The text property routines can now modify buffers other
than the current one.
* insdel.c (modify_region): New argument BUFFER. Select that
buffer while we prepare for the modification, and switch back when
1993-05-12 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
- * ymakefile (xfaces.o): Add window.h to the dependencies.
+ * ymakefile (xfaces.o): Add window.h to the dependencies.
* xfaces.c (intern_frame_face): Exchange order of arguments, to
make callers correct.
is an X frame.
* xdisp.c (copy_rope, copy_part_of_rope): Add face argument.
- (display_text_line): Initialize current_face to zero. Apply it
+ (display_text_line): Initialize current_face to zero. Apply it
to characters as we write them to the display matrix.
(display_string): Pass the new argument to copy_rope.
1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
- * fileio.c (ro_fsys) [SOLARIS_BROKEN_ACCESS]: Check for the
- filesystem being ro, since Solaris 2.1 doesn't.
- (file-writable-p): Call ro_fsys.
+ * fileio.c (ro_fsys) [SOLARIS_BROKEN_ACCESS]: Check for the
+ filesystem being ro, since Solaris 2.1 doesn't.
+ (file-writable-p): Call ro_fsys.
* s/sol2.h (SOLARIS_BROKEN_ACCESS): Define this.
* systime.h: Use the strategy from getdate.y to include the proper
* window.c (Vmouse_event): Var deleted.
(syms_of_window): Don't make it a Lisp var.
- * keyboard.c (read_avail_input, Fset_input_mode): Make
- meta_key a three-value variable to support 8-bit input.
+ * keyboard.c (read_avail_input, Fset_input_mode): Make
+ meta_key a three-value variable to support 8-bit input.
1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
* keyboard.c (syms_of_keyboard): Doc fix for
extra-keyboard-modifiers.
- * lisp.h (CHAR_ALT, CHAR_SUPER, CHAR_HYPER, CHAR_SHIFT, CHAR_CTL,
- CHAR_META): Shift these all up one bit, back to where they were.
+ * lisp.h (CHAR_ALT, CHAR_SUPER, CHAR_HYPER, CHAR_SHIFT, CHAR_CTL)
+ (CHAR_META): Shift these all up one bit, back to where they were.
1993-05-02 Jim Blandy (jimb@totoro.cs.oberlin.edu)
1993-04-29 Jim Blandy (jimb@totoro.cs.oberlin.edu)
- Implement extra_keyboard_modifiers properly.
+ Implement extra_keyboard_modifiers properly.
* keyboard.c (syms_of_keyboard): Doc fix for
extra-keyboard-modifiers; use the same modifier bits as we do for
characters.
* lisp.h (CHAR_ALT, CHAR_SUPER, CHAR_HYPER): New constants, in
case we need them.
- * termhooks.h (alt_modifier, super_modifier, hyper_modifier,
- shift_modifier, ctrl_modifier, meta_modifier): Define these in
+ * termhooks.h (alt_modifier, super_modifier, hyper_modifier)
+ (shift_modifier, ctrl_modifier, meta_modifier): Define these in
terms of the CHAR_mumble macros, to avoid having the same thing
defined in two places.
1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
* m/ibmps2-aix.h, m/ibmrs6000.h, m/ibmrt-aix.h, m/mips.h,
- m/sps7.h, s/hpux.h, s/usg5-4.h (HAVE_DUP2): Removed; derived by
+ * m/sps7.h, s/hpux.h, s/usg5-4.h (HAVE_DUP2): Removed; derived by
configure script.
* s/hpux.h, s/irix3-3.h, s/aix3-1.h (HAVE_GETHOSTNAME): Removed;
derived by configure script.
* config.h.in (getenv): Don't test THIS_IS_YMAKEFILE to see if we
should exclude the getenv declaration; instead, test NOT_C_CODE.
- Per suggestion from Francesco Potorti`.
+ Per suggestion from Francesco Potortì.
* ymakefile (NOT_C_CODE): Define this; it's true, and useful.
* dispnew.c (Fsleep_for, Fsit_for): Allow SECONDS to be a
Make the modifier manipulation functions more robust. The old way
caused a bug once, and probably would again.
- * termhooks.h (alt_modifier, super_modifier, hyper_modifier,
- shift_modifier, ctrl_modifier, meta_modifier): Shift these all
+ * termhooks.h (alt_modifier, super_modifier, hyper_modifier)
+ (shift_modifier, ctrl_modifier, meta_modifier): Shift these all
down one bit in value, to avoid sign extension problems.
* lisp.h (CHAR_META, CHAR_CTL, CHAR_SHIFT): Fix these definitions too.
* keyboard.c (lispy_modifier_list): Ignore modifier bits beyond
* lisp.h (LOADHIST_ATTACH): New macro.
(Vcurrent_load_list, Vload_history): Vars declared.
- * eval.c: (defun, defmacro, defvar, defconst):
+ * eval.c (defun, defmacro, defvar, defconst):
Attach symbol argument to the list of globals for the input source.
(do_autoload): Save the old autoloads, in case we ever unload.
that out now.
Changes for Emacs 19 from Thorsten Ohl <ohl@chico.harvard.edu>:
- * s/mach2.h: copied from the Emacs 18.59 distribution.
+ * s/mach2.h: Copied from the Emacs 18.59 distribution.
Don't define NO_REMAP, define START_FILES as
`pre-crt0.o' instead. Define LIB_MATH as `-lm', to override the
default `-lm -lc' (there is no libc on the NeXT).
* ymakefile ($(OLDXMENU)): Remove $(OLDXMENU) before trying to
link in a new version.
- * lisp.h (Qrange_error, Qdomain_error, Qsingularity_error,
- Qoverflow_error, Qunderflow_error): Add extern to these declarations.
+ * lisp.h (Qrange_error, Qdomain_error, Qsingularity_error)
+ (Qoverflow_error, Qunderflow_error): Add extern to these declarations.
1993-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* keyboard.c (command_loop_1): Rebuild menu bar if
update_mode_lines is set.
- long_to_cons and cons_to_long are generally useful things; they're
+ long_to_cons and cons_to_long are generally useful things; they're
needed whether or not X is defined.
* xselect.c (long_to_cons, cons_to_long): Moved from here...
- * data.c (long_to_cons, cons_to_long): ... to here.
- * lisp.h (long_to_cons, cons_to_long): Add extern declaration.
+ * data.c (long_to_cons, cons_to_long): ... to here.
+ * lisp.h (long_to_cons, cons_to_long): Add extern declaration.
* xmenu.c (Qmenu_enable): Definition moved...
(syms_of_xmenu): ... along with initialization ...
* alloc.c (__malloc_hook, __realloc_hook, __free_hook): Declare
these extern, not static. (!)
- * alloc.c (__malloc_hook, old_malloc_hook, __realloc_hook,
- old_realloc_hook): Declare that the functions these point to return
+ * alloc.c (__malloc_hook, old_malloc_hook, __realloc_hook)
+ (old_realloc_hook): Declare that the functions these point to return
void *, not void.
- Adjust for autoconf merger.
+ Adjust for autoconf merger.
* config.h.in: Add extra line to top, in case autoconf gets fixed
and decides not to add Makefile-style comments to the top of the
files it generates which we are forced to lop off.
This isn't specific to X, and it allows us to avoid #including
xterm.h in files that don't really have anything to do with X.
* blockinput.h: New file.
- * xterm.h (BLOCK_INPUT, UNBLOCK_INPUT, TOTALLY_UNBLOCK_INPUT,
- UNBLOCK_INPUT_RESIGNAL): These are now in blockinput.h.
+ * xterm.h (BLOCK_INPUT, UNBLOCK_INPUT, TOTALLY_UNBLOCK_INPUT)
+ (UNBLOCK_INPUT_RESIGNAL): These are now in blockinput.h.
(x_input_blocked, x_pending_input): Deleted; there are analogs
in blockinput.h called interrupt_input_blocked and
interrupt_input_pending.
Block the processing of interrupt input while we're manipulating the
malloc heap.
- * alloc.c: (xfree): New function, to make it easy to free things
- safely.
+ * alloc.c (xfree): New function, to make it easy to free things safely.
(xmalloc, xrealloc): Block X input while doing the deed.
(VALIDATE_LISP_STORAGE, gc_sweep, compact_strings): Use xfree
instead of free.
hooks into the GNU malloc routines.
* emacs.c [not SYSTEM_MALLOC] (main): Call uninterrupt_malloc
on startup.
- * alloc.c: (make_interval, make_float, Fcons, Fmake_vector,
- Fmake_symbol, Fmake_marker, make_uninit_string, Fgarbage_collect):
+ * alloc.c (make_interval, make_float, Fcons, Fmake_vector)
+ (Fmake_symbol, Fmake_marker, make_uninit_string, Fgarbage_collect):
Use xmalloc instead of malloc; don't bother to check if out of
memory here.
(Fgarbage_collect): Call xrealloc instead of realloc.
* xfaces.c (xfree): Don't #define this to be free; use the
definition in alloc.c.
* dispnew.c, doc.c, doprnt.c, fileio.c, lread.c, term.c, xfns.c,
- xmenu.c, xterm.c: Use xfree instead of free.
+ * xmenu.c, xterm.c: Use xfree instead of free.
* hftctl.c: Use xfree and xmalloc instead of free and malloc.
* keymap.c (current_minor_maps): BLOCK_INPUT while calling realloc
and malloc.
of free and malloc. BLOCK_INPUT around routines which we know
will call malloc.
- ymakefile (keyboard.o, keymap.o, search.o, sysdep.o, xfaces.o,
- xfns.o, xmenu.o, xterm.o, xselect.o, alloc.o, eval.o): Note that
+ * ymakefile (keyboard.o, keymap.o, search.o, sysdep.o, xfaces.o)
+ (xfns.o, xmenu.o, xterm.o, xselect.o, alloc.o, eval.o): Note that
these depend on blockinput.h.
* keyboard.c (parse_modifiers, apply_modifiers): Make sure we're
* xterm.c [VMS]: Don't #include <sys/termio.h> and <string.h>.
* xfns.c [VMS]: Get the gray_bits from [.bitmaps]gray.xbm.
* process.c [VMS] (DCL_PROMPT): Remove hack.
- (WIFSTOPPED, WIFSIGNALED, WIFEXITED, XRETCODE, WSTOPSIG,
- WCOREDUMP, WTERMSIG): New dummy definitions.
+ (WIFSTOPPED, WIFSIGNALED, WIFEXITED, XRETCODE, WSTOPSIG)
+ (WCOREDUMP, WTERMSIG): New dummy definitions.
(deactivate_process): Add missing semicolon.
* dispnew.c (init_display): Get display name from environment
properly on VMS as well as Unix.
1993-03-22 Richard Stallman (rms@wookumz.gnu.ai.mit.edu)
- * indent.c (current_column, Findent_to, position_indentation):
+ * indent.c (current_column, Findent_to, position_indentation)
(Fmove_to_column, compute_motion): Allow tab_width up to 1000.
* xdisp.c (display_string, display_text_line):
1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
- Use the `visiblity' parameter to determine the initial state of
+ Use the `visibility' parameter to determine the initial state of
the frame, instead of the `iconic-startup' and
`suppress-initial-map' parameters.
* xfns.c (x_icon): Test the Qvisibility parameter against Qicon,
1993-03-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
- * cmds.c (overwrite_binary_mode): Deleted; this implements the
+ * cmds.c (overwrite_binary_mode): Deleted; this implements the
wrong feature.
(Qoverwrite_mode_binary): New variable.
(internal_self_insert): If current_buffer->overwrite_mode is
`frame-live-p'.
* window.c (Fwindow_live_p): Renamed from Flive_window_p.
* lisp.h (CHECK_LIVE_WINDOW): Change to use Qwindow_live_p.
- (Qwindow_live_p): Extern declaration renamed fom Qlive_window_p.
+ (Qwindow_live_p): Extern declaration renamed from Qlive_window_p.
1993-03-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* xterm.c (Xatom_wm_change_state): Define here.
* xfns.c (Xatom_wm_change_state): Just declare.
- (Xatom_emacs_selection, Xatom_clipboard, Xatom_clipboard_selection):
- (Xatom_wm_change_state, Xatom_incremental, Xatom_multiple):
- (Xatom_targets, Xatom_timestamp, Xatom_delete, Xatom_insert_selection):
+ (Xatom_emacs_selection, Xatom_clipboard, Xatom_clipboard_selection)
+ (Xatom_wm_change_state, Xatom_incremental, Xatom_multiple)
+ (Xatom_targets, Xatom_timestamp, Xatom_delete, Xatom_insert_selection)
(Xatom_pair, Xatom_insert_property, Xatom_text): Decls deleted.
(x_begin_selection_own): Decls deleted.
(Fx_open_connection): Set up only the wm atoms here.
1993-03-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* xmenu.c (xmenu_show): New arg enable_list.
- (keymap_panes): New arg enables
+ (keymap_panes): New arg enables.
(single_keymap_panes): New arg enables. Fill in its contents.
(list_of_panes, list_of_items): New arg enables. Fill in contents.
(Fx_popup_menu): Pass enable and enable_list args.
1993-03-12 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
- * term.c (CONDITIONAL_REASSIGN): fixed reference to tigetstr.
+ * term.c (CONDITIONAL_REASSIGN): Fixed reference to tigetstr.
This should have been tgetstr, but I typoed and tigetstr happens
to link and even do the right thing if you're on a System V box.
* m/intel386.h (LIB_STANDARD): If USG5_4 is #defined, there's no
need to include `-lPW'; that has been merged with `-lc'.
- * emacs.c (__do_global_ctors, __do_global_ctors_aux,
- __do_global_dtors, __CTOR_LIST__, __DTOR_LIST__, __main): Don't
+ * emacs.c (__do_global_ctors, __do_global_ctors_aux)
+ (__do_global_dtors, __CTOR_LIST__, __DTOR_LIST__, __main): Don't
define these if ORDINARY_LINK is #defined; in that case, the
standard linking procedure will find definitions for these.
(Fwhere_is_internal): Use meta_modifier.
(append_key): Always return a vector.
- * lisp.h (Qrange_error, Qdomain_error, Qsingularity_error):
+ * lisp.h (Qrange_error, Qdomain_error, Qsingularity_error)
(Qoverflow_error, Qunderflow_error): New vars.
* data.c (syms_of_data) [LISP_FLOAT_TYPE]: Define new error conditions:
(x_user_set_name): Function deleted.
(x_char_height, x_char_width): New functions.
- * frame.c (Fframe_char_height, Fframe_char_width):
+ * frame.c (Fframe_char_height, Fframe_char_width)
(Fframe_pixel_height, Fframe_pixel_width):
New functions, two versions of each.
[MULTI_FRAME] (syms_of_frame): Make them Lisp functions.
(read_escape): Handle \H, \A, \s. Use ..._modifier.
* ymakefile (lread.o): Depend on termhooks.h.
- * termhooks.h (alt_modifier, super_modifier, hyper_modifier):
+ * termhooks.h (alt_modifier, super_modifier, hyper_modifier)
(shift_modifier, ctrl_modifier, meta_modifier):
Renumber the bits.
* keyboard.c (make_lispy_event): For ASCII event, the ..._modifier
* indent.c (current_column, Fmove_to_column, compute_motion):
Expect display table elts to be vectors.
- * alloc.c: (Fmake_rope, Frope_elt): Fns deleted.
+ * alloc.c (Fmake_rope, Frope_elt): Fns deleted.
* lisp.h (CHAR_META, CHAR_SHIFT, CHAR_CTL): New macros.
1993-03-02 Karl Berry (karl@cs.umb.edu)
- * s/isc2-2.h (USG_SHARED_LIBRARIES, CLASH_DETECTION, NO_FCHMOD):
- Define.
- (HAVE_TIMEVAL): Do not define.
- (NO_ASM): Only define once.
+ * s/isc2-2.h (USG_SHARED_LIBRARIES, CLASH_DETECTION, NO_FCHMOD):
+ Define.
+ (HAVE_TIMEVAL): Do not define.
+ (NO_ASM): Only define once.
1993-03-02 Jim Blandy (jimb@totoro.cs.oberlin.edu)
(Fnext_single_property_change): Likewise.
(Fprevious_property_change, Fnext_property_change): Likewise.
- * xterm.c (x_do_pending_expose, XTframe_rehighlight):
+ * xterm.c (x_do_pending_expose, XTframe_rehighlight)
(x_window_to_scrollbar): Use XGCTYPE.
1993-02-28 Jim Blandy (jimb@totoro.cs.oberlin.edu)
Use the term `scroll bar', instead of `scrollbar'.
* alloc.c, frame.c, frame.h, indent.c, keyboard.c, keyboard.h,
- lisp.h, term.c, termhooks.h, window.c, window.h, xdisp.c, xfns.c,
- xterm.c, xterm.h: Terminology changed.
+ * lisp.h, term.c, termhooks.h, window.c, window.h, xdisp.c, xfns.c,
+ * xterm.c, xterm.h: Terminology changed.
- Don't generate switch-frame events by checking Vlast_event_frame;
+ Don't generate switch-frame events by checking Vlast_event_frame;
use a separate variable for that bookkeeping. In order to
generate them properly, we may need to fiddle with it.
* keyboard.c (internal_last_event_frame): New variable.
* alloc.c (mark_interval_tree): Remove spurious & in front of
function name.
- * alloc.c (UNMARK_BALANCE_INTERVALS): Fix to accomodate compilers
+ * alloc.c (UNMARK_BALANCE_INTERVALS): Fix to accommodate compilers
other than GCC, which do not allow casts on the LHS of an
assignment.
* textprop.c (Fadd_text_properties): Put OBJECT arg last.
Make it optional.
(Fset_text_properties, Fremove_text_properties): Likewise.
- (Fnext_single_property_change, Fprevious_single_property_change):
+ (Fnext_single_property_change, Fprevious_single_property_change)
(Fnext_property_change, Fprevious_property_change): Likewise.
(Ferase_text_properties): #if 0.
(Fget_text_property): New function.
1993-02-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
- * keymap.c (Flookup_key, Fkey_binding, Flocal_key_binding,
- Fglobal_key_binding, Fminor_mode_key_binding): Add a new optional
+ * keymap.c (Flookup_key, Fkey_binding, Flocal_key_binding)
+ (Fglobal_key_binding, Fminor_mode_key_binding): Add a new optional
argument ACCEPT_DEFAULT, to control whether this function sees
bindings for t.
- (Fwhere_is_internal, describe_map_tree, describe_map_2,
- describe_vector): Pass the proper arguments to Flookup_key.
+ (Fwhere_is_internal, describe_map_tree, describe_map_2)
+ (describe_vector): Pass the proper arguments to Flookup_key.
* fileio.c (Fexpand_file_name): Pass DEFALT through
Fexpand_file_name before using it.
1993-01-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
- `live-frame-p' has become `frame-live-p'.
+ `live-frame-p' has become `frame-live-p'.
* frame.c (Qlive_frame_p): Renamed to Qframe_live_p.
(Flive_frame_p): Renamed to Fframe_live_p.
(syms_of_frame): Defsubrs and initializations adjusted.
* commands.h (unread_command_event): Change extern declaration.
* keyboard.c (unread_command_event): Change the definition.
(syms_of_keyboard): Change DEFVAR, and adjust the docstring.
- (command_loop_1, read_char, Finput_pending, Fdiscard_input,
- quit_throw_to_read_char, init_keyboard): Change to use
+ (command_loop_1, read_char, Finput_pending, Fdiscard_input)
+ (quit_throw_to_read_char, init_keyboard): Change to use
unread_command_events, with the new semantics.
* lread.c (read_char): Same.
* minibuf.c (temp_echo_area_glyphs): Same.
* xterm.c (x_set_window_size): Always mark the frame garbaged.
- * window.c (Vmouse_window): Variable removed; it can't be handled
+ * window.c (Vmouse_window): Variable removed; it can't be handled
properly without race conditions, and the events give you all the
information you need anyway.
(syms_of_window): Remove DEFVAR.
* xterm.h (struct x_display): vertical_scrollbars and
judge_timestamp members deleted.
(struct scrollbar): Redesigned to be a template for a Lisp_Vector.
- (SCROLLBAR_VEC_SIZE, XSCROLLBAR, SCROLLBAR_PACK, SCROLLBAR_UNPACK,
- SCROLLBAR_X_WINDOW, SET_SCROLLBAR_X_WINDOW,
- VERTICAL_SCROLLBAR_INSIDE_WIDTH, VERTICAL_SCROLLBAR_TOP_RANGE,
- VERTICAL_SCROLLBAR_INSIDE_HEIGHT, VERTICAL_SCROLLBAR_MIN_HANDLE):
+ (SCROLLBAR_VEC_SIZE, XSCROLLBAR, SCROLLBAR_PACK, SCROLLBAR_UNPACK)
+ (SCROLLBAR_X_WINDOW, SET_SCROLLBAR_X_WINDOW)
+ (VERTICAL_SCROLLBAR_INSIDE_WIDTH, VERTICAL_SCROLLBAR_TOP_RANGE)
+ (VERTICAL_SCROLLBAR_INSIDE_HEIGHT, VERTICAL_SCROLLBAR_MIN_HANDLE):
New macros, to help deal with the lispy structures, and deal with
the graphics.
* frame.h (WINDOW_VERTICAL_SCROLLBAR): Macro deleted.
* xterm.c (x_window_to_scrollbar): Scrollbars are chained on
frames' scrollbar field, not their x.display->vertical_scrollbars
field.
- (x_scrollbar_create, x_scrollbar_set_handle, x_scrollbar_move,
- x_scrollbar_remove, XTset_vertical_scrollbar,
- XTcondemn_scrollbars, XTredeem_scrollbar, XTjudge_scrollbars,
- x_scrollbar_expose, x_scrollbar_handle_click,
- x_scrollbar_handle_motion): Substantially rewritten to correct
- typos and brainos, and to accomodate the lispy structures.
+ (x_scrollbar_create, x_scrollbar_set_handle, x_scrollbar_move)
+ (x_scrollbar_remove, XTset_vertical_scrollbar)
+ (XTcondemn_scrollbars, XTredeem_scrollbar, XTjudge_scrollbars)
+ (x_scrollbar_expose, x_scrollbar_handle_click)
+ (x_scrollbar_handle_motion): Substantially rewritten to correct
+ typos and brainos, and to accommodate the lispy structures.
* xterm.c (x_scrollbar_background_expose): Function deleted; we
don't want anything in the background there after all.
window_internal_width.
(pos_tab_offset, Fvertical_motion): Use window_internal_width
instead of writing it out.
- * window.c (Fpos_visible_in_window_p, Fwindow_width, Fscroll_left,
- Fscroll_right): Same.
- * xdisp.c (redisplay, try_window, try_window_id,
- display_text_line): Same.
+ * window.c (Fpos_visible_in_window_p, Fwindow_width, Fscroll_left)
+ (Fscroll_right): Same.
+ * xdisp.c (redisplay, try_window, try_window_id)
+ (display_text_line): Same.
* xdisp.c (display_string): Add new variable `f', to be W's
frame. Use it to set desired_glyphs, and to get the frame's width
(x_set_vertical_scrollbar): Renamed to x_set_vertical_scrollbars.
(x_frame_parms): Adjusted accordingly.
- * xterm.h (CHAR_TO_PIXEL_WIDTH, CHAR_TO_PIXEL_HEIGHT,
- PIXEL_TO_CHAR_WIDTH, PIXEL_TO_CHAR_HEIGHT): Rewritten, using:
- (CHAR_TO_PIXEL_ROW, CHAR_TO_PIXEL_COL, PIXEL_TO_CHAR_ROW,
- PIXEL_TO_CHAR_COL): New macros.
+ * xterm.h (CHAR_TO_PIXEL_WIDTH, CHAR_TO_PIXEL_HEIGHT)
+ (PIXEL_TO_CHAR_WIDTH, PIXEL_TO_CHAR_HEIGHT): Rewritten, using:
+ (CHAR_TO_PIXEL_ROW, CHAR_TO_PIXEL_COL, PIXEL_TO_CHAR_ROW)
+ (PIXEL_TO_CHAR_COL): New macros.
* xfns.c [not HAVE_X11] (Fx_create_frame): Use the
PIXEL_TO_CHAR_{HEIGHT,WIDTH} macros to figure the frame's
character size, and the CHAR_TO_PIXEL* macros for vice versa.
- * xterm.c (XTwrite_glyphs, XTclear_end_of_line, stufflines,
- scraplines, dumprectangle, pixel_to_glyph_coords, x_draw_box,
- clear_cursor, x_display_bar_cursor, x_draw_single_glyph,
- x_set_mouse_position): Use the CHAR_TO_PIXEL_* macros.
+ * xterm.c (XTwrite_glyphs, XTclear_end_of_line, stufflines)
+ (scraplines, dumprectangle, pixel_to_glyph_coords, x_draw_box)
+ (clear_cursor, x_display_bar_cursor, x_draw_single_glyph)
+ (x_set_mouse_position): Use the CHAR_TO_PIXEL_* macros.
* xterm.c (x_wm_set_size_hint): The max_width and max_height
members of the size_hints are expressed in pixels, not columns.
input_event to use frame_or_window now.
* xterm.c (construct_mouse_click, XTread_socket): Same.
- * xterm.c (last_mouse_bar, last_mouse_bar_frame, last_mouse_part,
- last_mouse_scroll_range_start, last_mouse_scroll_range_end):
+ * xterm.c (last_mouse_bar, last_mouse_bar_frame, last_mouse_part)
+ (last_mouse_scroll_range_start, last_mouse_scroll_range_end):
Replaced with...
(last_mouse_scrollbar): New variable.
(note_mouse_movement): Clear last_mouse_scrollbar when we have
- receieved a new motion.
+ received a new motion.
(syms_of_xterm): Staticpro last_mouse_scrollbar.
* xterm.c (note_mouse_position): Renamed to note_mouse_movement,
1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
- * config.h.in: protect against multiple #inclusions.
+ * config.h.in: Protect against multiple #inclusions.
* config.h.in: Add a declaration for getenv.
1992-12-21 Jim Blandy (jimb@totoro.cs.oberlin.edu)
- * keyboard.c: Protect all references to kbd_buffer_frames with
+ * keyboard.c: Protect all references to kbd_buffer_frames with
#ifdef MULTI_FRAME.
* frame.h (struct frame): New fields `can_have_scrollbars' and
* xterm.h (struct x_display): vertical_scrollbars,
judge_timestamp, vertical_scrollbar_extra: New fields.
(struct scrollbar): New struct.
- (VERTICAL_SCROLLBAR_PIXEL_WIDTH, VERTICAL_SCROLLBAR_PIXEL_HEIGHT,
- VERTICAL_SCROLLBAR_LEFT_BORDER, VERTICAL_SCROLLBAR_RIGHT_BORDER,
- VERTICAL_SCROLLBAR_TOP_BORDER, VERTICAL_SCROLLBAR_BOTTOM_BORDER,
- CHAR_TO_PIXEL_WIDTH, CHAR_TO_PIXEL_HEIGHT, PIXEL_TO_CHAR_WIDTH,
- PIXEL_TO_CHAR_HEIGHT): New accessors and macros.
+ (VERTICAL_SCROLLBAR_PIXEL_WIDTH, VERTICAL_SCROLLBAR_PIXEL_HEIGHT)
+ (VERTICAL_SCROLLBAR_LEFT_BORDER, VERTICAL_SCROLLBAR_RIGHT_BORDER)
+ (VERTICAL_SCROLLBAR_TOP_BORDER, VERTICAL_SCROLLBAR_BOTTOM_BORDER)
+ (CHAR_TO_PIXEL_WIDTH, CHAR_TO_PIXEL_HEIGHT, PIXEL_TO_CHAR_WIDTH)
+ (PIXEL_TO_CHAR_HEIGHT): New accessors and macros.
* frame.c (make_frame): Initialize the `can_have_scrollbars' and
`has_vertical_scrollbars' fields of the frame.
* term.c (term_init): Note that TERMCAP terminals don't support
* xterm.c: #include <X11/cursorfont.h> and "window.h".
(x_vertical_scrollbar_cursor): New variable.
(x_term_init): Initialize it.
- (last_mouse_bar, last_mouse_bar_frame, last_mouse_part,
- last_mouse_scroll_range_start, last_mouse_scroll_range_end): New
+ (last_mouse_bar, last_mouse_bar_frame, last_mouse_part)
+ (last_mouse_scroll_range_start, last_mouse_scroll_range_end): New
variables.
(XTmouse_position): Use them to return scrollbar movement events.
Take new arguments, for that purpose.
- (x_window_to_scrollbar, x_scrollbar_create,
- x_scrollbar_set_handle, x_scrollbar_remove, x_scrollbar_move,
- XTset_scrollbar, XTcondemn_scrollbars, XTredeem_scrollbar,
- XTjudge_scrollbars, x_scrollbar_expose,
- x_scrollbar_background_expose, x_scrollbar_handle_click,
- x_scrollbar_handle_motion): New functions to implement scrollbars.
+ (x_window_to_scrollbar, x_scrollbar_create)
+ (x_scrollbar_set_handle, x_scrollbar_remove, x_scrollbar_move)
+ (XTset_scrollbar, XTcondemn_scrollbars, XTredeem_scrollbar)
+ (XTjudge_scrollbars, x_scrollbar_expose)
+ (x_scrollbar_background_expose, x_scrollbar_handle_click)
+ (x_scrollbar_handle_motion): New functions to implement scrollbars.
(x_term_init): Set the termhooks.h hooks to point to them.
(x_set_window_size): Use new macros to calculate frame size. Set
vertical_scrollbar_extra field.
v_thumbdown, v_slider, h_scrollbar, h_thumbup,
h_thumbdown, h_slider, v_scrollbar_width, h_scrollbar_height
fields.
- * keyboard.c (Qvscrollbar_part, Qvslider_part, Qvthumbup_part,
- Qvthumbdown_part, Qhscrollbar_part, Qhslider_part, Qhthumbup_part,
- Qhthumbdown_part, Qscrollbar_click): Deleted; part of an obsolete
+ * keyboard.c (Qvscrollbar_part, Qvslider_part, Qvthumbup_part)
+ (Qvthumbdown_part, Qhscrollbar_part, Qhslider_part, Qhthumbup_part)
+ (Qhthumbdown_part, Qscrollbar_click): Deleted; part of an obsolete
interface.
(head_table): Removed from here as well.
(syms_of_keyboard): And here.
* xterm.c (XTread_socket): When we get MapNotify, UnmapNotify,
Expose, ExposeWindow, or UnmapWindow, set f->async_visible, not
f->visible.
- (x_do_pending_expose, x_raise_frame, x_lower_frame,
- x_make_frame_invisible, x_make_frame_visible, x_iconify_frame):
+ (x_do_pending_expose, x_raise_frame, x_lower_frame)
+ (x_make_frame_invisible, x_make_frame_visible, x_iconify_frame):
Test and set f->async_visible and f->async_iconified, not
f->visible or f->async_iconified.
`make-obsolete-variable' to warn people.
* command.h (unread_command_char): Change name in extern declaration.
* keyboard.c (unread_command_char): Rename.
- (command_loop_1, read_char, Finput_pending, Fdiscard_input,
- quit_throw_to_read_char, init_keyboard, syms_of_keyboard): Change
+ (command_loop_1, read_char, Finput_pending, Fdiscard_input)
+ (quit_throw_to_read_char, init_keyboard, syms_of_keyboard): Change
references.
* lread.c (Fread_char): Change reference.
* minibuf.c (temp_echo_area_glyphs): Change reference to
calling getwd.
#include <sys/types.h> and <sys/stat.h>, for the call to stat.
- Indicate whether an autoload form stands for a keymap or not.
+ Indicate whether an autoload form stands for a keymap or not.
* eval.c (Fautoload): Renamed fifth argument TYPE. Document the
fact that (eq TYPE 'keymap) means FUNCTION will become a keymap
when loaded.
(read_key_sequence): Declare PROMPT to be char *, not a
Lisp_Object. Use the appropriate accessors on keybuf when looking
for ASCII function key sequences.
- * keyboard.h (get_keymap_1, Fkeymapp, reorder_modifiers,
- Fmouse_click_p, read_char): Add external declarations for these.
+ * keyboard.h (get_keymap_1, Fkeymapp, reorder_modifiers)
+ (Fmouse_click_p, read_char): Add external declarations for these.
* keymap.c (Fdefine_key, Flookup_key, describe_map): Don't assume
that Flength returns an integer.
- * lisp.h (Fdefault_boundp, make_float, Ffloat, Fnth, Fcopy_alist,
- Fmake_byte_code, Fverify_visited_file_modtime, Ffile_exists_p,
- Fdirectory_file_name, Ffile_name_directory,
- expand_and_dir_to_file, Ffile_accessible_directory_p, Fbyte_code,
- Fundo_boundary, truncate_undo_list): Add extern declarations for
+ * lisp.h (Fdefault_boundp, make_float, Ffloat, Fnth, Fcopy_alist)
+ (Fmake_byte_code, Fverify_visited_file_modtime, Ffile_exists_p)
+ (Fdirectory_file_name, Ffile_name_directory)
+ (expand_and_dir_to_file, Ffile_accessible_directory_p, Fbyte_code)
+ (Fundo_boundary, truncate_undo_list): Add extern declarations for
these.
* lread.c (read_char): Add an extern declaration for this,
indicating that it returns a Lisp_Object.
unread_command_char.
* print.c (print): Cast the frame's address to an integer before
passing it to sprintf to form the frame's printed form.
- * process.c: (status_convert): Declare this to return a
+ * process.c (status_convert): Declare this to return a
Lisp_Object at the top of the file.
(decode_status): Don't untag XCONS (tem)->cdr before storing it in
tem; tem is a Lisp_Object, too.
PART as Qnil, not zero.
(x_calc_absolute_position): Remember that x_screen_width and
x_screen_height are ints, not Lisp_Objects.
- * xterm.h (x_screen_count, x_release, x_screen_height,
- x_screen_height_mm, x_screen_width, x_screen_width_mm,
- x_save_under, x_screen_planes): Declare this as ints, to match
+ * xterm.h (x_screen_count, x_release, x_screen_height)
+ (x_screen_height_mm, x_screen_width, x_screen_width_mm)
+ (x_save_under, x_screen_planes): Declare this as ints, to match
their definitions in xterm.c.
* ymakefile: Note the new dependencies caused by the new
#inclusions above.
that nobody outside of this file uses it.
* keymap.c: Deal with autoloaded keymaps properly.
- (get_keymap_1): Renamed to inner_get_keymap; made
+ (get_keymap_1): Renamed to inner_get_keymap; made
static. New argument AUTOLOAD says to pursue autoloads if
non-zero.
(Fkeymapp, get_keymap, get_keyelt, Flookup_key): Ask get_keymap_1
1992-10-27 Noah Friedman (friedman@nutrimat.gnu.ai.mit.edu)
- * sysdep.c (get_system_name): Use gethostname for USG systems if
- HAVE_GETHOSTNAME is defined.
- * s/hpux7.h, s/irix3-3.h (HAVE_GETHOSTNAME): Define it.
+ * sysdep.c (get_system_name): Use gethostname for USG systems if
+ HAVE_GETHOSTNAME is defined.
+ * s/hpux7.h, s/irix3-3.h (HAVE_GETHOSTNAME): Define it.
1992-10-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
* xdisp.c (message): If M is zero, clear echo_area_glyphs and
previous_echo_glyphs, so that the minibuffer shows through.
-* * editfns.c (Fmessage): With no arguments, clear any active
+ * editfns.c (Fmessage): With no arguments, clear any active
message; let the minibuffer contents show through.
* minibuf.c (temp_echo_area_glyphs): Don't clear echo_area_glyphs
and previous_echo_glyphs; let message do that work.
(init_keyboard): Don't allocate it here.
(syms_of_keyboard): Allocate it here, and staticpro it.
* keyboard.h (this_command_keys): Extern declaration changed. Doc fix.
- * callint.c (Fcall_interactively): Change handling of 'e' spec;
+ * callint.c (Fcall_interactively): Change handling of 'e' spec;
this_command_keys is now a vector.
* keyboard.c (read_char): Call ourselves with the appropriate
store things in it.
* window.c: Try to deal coherently with deleted windows:
-* (Flive_window_p): New function.
+ (Flive_window_p): New function.
(Qlive_window_p): New variable, to name it in type errors.
(syms_of_window): Defsubr Slive_window_p, init and staticpro
Qlive_window_p.
* window.c (decode_window): Use CHECK_LIVE_WINDOW instead of
CHECK_WINDOW; the only thing a user should be able to do to a dead
window is check its type.
- (Fcoordinates_in_window_p, Fnext_window, Fprevious_window,
- Fdelete_other_windows, Fselect_window, Fsplit_window,
- Fscroll_other_window): Use CHECK_LIVE_WINDOW instead of
+ (Fcoordinates_in_window_p, Fnext_window, Fprevious_window)
+ (Fdelete_other_windows, Fselect_window, Fsplit_window)
+ (Fscroll_other_window): Use CHECK_LIVE_WINDOW instead of
CHECK_WINDOW.
* frame.c (make_frame_without_minibuffer, Fwindow_frame): Same.
* sunfns.c (Fsun_menu_internal): Same.
* dispnew.c (scroll_frame_lines): All references to frame elements
`nruns' and 'face_list' removed. Handle new element `max_ascent'.
(free_frame_glyphs): Don't free nonexistent elements `nruns' and
- `face_list'; do free `max_ascent' element.
+ `face_list'; do free `max_ascent' element.
(make_frame_glyphs): Don't allocate nonexistent elements `nruns'
- and `face_list'; do allocate `max_ascent' element.
+ and `face_list'; do allocate `max_ascent' element.
(update_frame): Replaced use of macro LINE_HEIGHT with element
frame element `pix_height'.
1992-10-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
- * ymakefile (ralloc.o): Delete dep mem_limits.h
+ * ymakefile (ralloc.o): Delete dep mem_limits.h.
(vm-limit.o): Rename dep to mem-limits.h.
1992-10-12 Roland McGrath (roland@geech.gnu.ai.mit.edu)
(syms_of_keyboard): DEFVAR Vlast_event_frame whether or not
MULTI_FRAME is defined.
- * keyboard.c: Add switch-frame events.
+ * keyboard.c: Add switch-frame events.
(Qswitch_frame): New event header symbol.
(head_table): Include Qswitch_frame in the table of event heads.
(kbd_buffer_get_event): Detect when a frame switch has occurred,
are not 5 elements long.
(EVENT_HEAD): Work correctly on all sorts of events, not just
events with parameters.
- (EVENT_WINDOW, EVENT_BUFFER_POSN, EVENT_SCROLLBAR_BUTTON,
- EVENT_WINDOW_POSN, EVENT_TIMESTAMP): These aren't useful
+ (EVENT_WINDOW, EVENT_BUFFER_POSN, EVENT_SCROLLBAR_BUTTON)
+ (EVENT_WINDOW_POSN, EVENT_TIMESTAMP): These aren't useful
anymore; this information may appear twice in an event. These
are replaced by the POSN_ accessors, which are meant to be
composed with the EVENT_START and EVENT_END accessors.
(EVENT_START, EVENT_END): Two new accessors, to get at the
starting and ending position of an event.
- (POSN_WINDOW, POSN_BUFFER_POSN, PONS_SCROLLBAR_BUTTON,
- POSN_WINDOW_POSN, POSN_TIMESTAMP): New macros, to futher
- diasassemble the values returned by EVENT_START and EVENT_END.
+ (POSN_WINDOW, POSN_BUFFER_POSN, PONS_SCROLLBAR_BUTTON)
+ (POSN_WINDOW_POSN, POSN_TIMESTAMP): New macros, to further
+ disassemble the values returned by EVENT_START and EVENT_END.
* keyboard.c (echo_char, read_char): Apply EVENT_HEAD without first
testing for EVENT_HAS_PARAMETERS; EVENT_HEAD works properly on
all sorts of events now.
* keyboard.c (Qevent_unmodified): Replaced by...
(Qevent_symbol_elements): New property.
- (syms_of_keyboard): initialize and staticpro the latter, not the
+ (syms_of_keyboard): Initialize and staticpro the latter, not the
former.
* keyboard.h (Qevent_unmodified): Extern declaration replaced by...
(Qevent_symbol_elements): This.
(Finsert_buffer_substring): Call graft_intervals_into_buffer.
#include "intervals.h".
- * insdel.c: #include "intervals.h"
+ * insdel.c: #include "intervals.h".
(prepare_to_modify_buffer): Call verify_interval_modification.
(insert_from_string): Call offset_intervals and
graft_intervals_into_buffer.
got removed with no comment or ChangeLog entry, and
append-to-buffer uses it.
- * window.c (struct save_window_data): Add a member called
+ * window.c (struct save_window_data): Add a member called
focus_frame, to save and restore the screen's focus frame.
(Fset_window_configuration): Redirect the frame's focus as
indicated in the window configuration.
* xselect.c (Qcut_buffer0): Symbol removed; we're using a new
interface to the cut buffer now.
- (NUM_CUT_BUFFERS, cut_buffer_atom, cut_buffer_value,
- cut_buffer_cached, cut_buffer_just_set): New variables.
+ (NUM_CUT_BUFFERS, cut_buffer_atom, cut_buffer_value)
+ (cut_buffer_cached, cut_buffer_just_set): New variables.
(Fx_own_selection, Fx_selection_value): Dike out the code to
handle CUT_BUFFER0 requests.
- (Fx_get_cut_buffer, Fx_set_cut_buffer, x_watch_cut_buffer_cache,
- x_invalidate_cut_buffer_cache): New functions.
+ (Fx_get_cut_buffer, Fx_set_cut_buffer, x_watch_cut_buffer_cache)
+ (x_invalidate_cut_buffer_cache): New functions.
(syms_of_xselect): Don't bother to initialize Qcut_buffer0.
Initialize and staticpro cut_buffer_value, and defsubr
Sx_get_cut_buffer and Sx_set_cut_buffer.
1992-09-28 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
- * frame.c (Fselect_frame, Fframe_root_window,
- Fframe_selected_window, Fnext_frame, Fmake_frame_visible,
- Fmake_frame_invisible, Ficonify_frame): Doc fixes.
+ * frame.c (Fselect_frame, Fframe_root_window)
+ (Fframe_selected_window, Fnext_frame, Fmake_frame_visible)
+ (Fmake_frame_invisible, Ficonify_frame): Doc fixes.
* ralloc.c: Since the users of the relocating allocation code
handle memory exhaustion, it's better to return an error code to
(syms_of_keyboard): Doc fix for Vlast_event_frame.
(Vlast_event_frame): Doc fix.
- * termhooks.h (alt_modifier, hyper_modifier, super_modifier,
- down_modifier, drag_modifier): New modifiers, to support the new
+ * termhooks.h (alt_modifier, hyper_modifier, super_modifier)
+ (down_modifier, drag_modifier): New modifiers, to support the new
input system. Re-arranged modifiers so that their bits are in
canonical order; this makes reorder_modifiers slightly simpler.
* keyboard.c (format_modifiers, reorder_modifiers): Handle the new
between text with different properties. Use the old and new
positions as arguments to these calls.
- * intervals.c, intervals.h: (map_intervals, make_buffer_interval,
- make_string_interval,run_hooks): Deleted.
+ * intervals.c, intervals.h (map_intervals, make_buffer_interval)
+ (make_string_interval, run_hooks): Deleted.
1992-09-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
* keymap.c (DENSE_TABLE_SIZE): Doc fix.
(keymap_table): Function removed; this function exists only to
support an incorrect understanding of the format of keymaps.
- (access_keymap, store_in_keymap, Fcopy_keymap,
- Faccessible_keymaps): Correctly handle vectors at any point in the
+ (access_keymap, store_in_keymap, Fcopy_keymap)
+ (Faccessible_keymaps): Correctly handle vectors at any point in the
keymap; don't assume it must be at the front.
(describe_map): Instead of calling describe_vector on the vector
in the cadr of the keymap (if present) and then calling
Pass buffer itself to handler, if have handler.
(Fwrite_region): GCPRO around Fexpand_file_name, Ffile_name_directory.
(Fread_file_name_internal): GCPRO around file name manip.
- (Ffile_writable_p, Ffile_readable_p): Use abspath, not filename,
+ (Ffile_writable_p, Ffile_readable_p): Use abspath, not filename.
(Ffile_executable_p, Ffile_exists_p): to run the handler.
(Fset_file_modes, Ffile_directory_p, Ffile_modes): Likewise.
(Ffile_newer_than_file_p): GCPRO around expand_and_dir_to_file.
Increment it when appropriate.
(record_auto_save): Use num_nonmacro_input_chars.
- * fileio.c (Ffile_name_directory, Ffile_name_nondirectory):
+ * fileio.c (Ffile_name_directory, Ffile_name_nondirectory)
(Ffile_name_as_directory, Fdirectory_file_name, Fexpand_file_name):
Call find_file_handler.
(syms_of_fileio): Set up Qfile_name_directory, etc.
1992-09-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
- * s/esix5r4.h: New file.
+ * s/esix5r4.h: New file.
- * sysdep.c (init_sys_modes): Handle VDSUSP like V_DSUSP.
- Use CDISABLE, not CDEL.
- Turn off IEXTEN if it exists.
- * systty.h (CDISABLE): New macro; may be defined from CDEL.
+ * sysdep.c (init_sys_modes): Handle VDSUSP like V_DSUSP.
+ Use CDISABLE, not CDEL.
+ Turn off IEXTEN if it exists.
+ * systty.h (CDISABLE): New macro; may be defined from CDEL.
* keyboard.c (command_loop_1): Bind inhibit-quit to t when in Fsit_for.
1992-09-09 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * frame.c (choose_minibuf_frame): abort if the selected frame has
+ * frame.c (choose_minibuf_frame): Abort if the selected frame has
nil in its minibuffer_window slot; this shouldn't happen any more.
* window.c (minibuffer_window): Accept an optional FRAME argument;
if specified, return the minibuffer used by that frame.
HAVE_TIMEVAL is defined and NEED_TIME_H isn't.
* systime.h: Note that the tz_dsttime field of the struct timezone
- returned by gettimeofday doesn't say whether daylight savings is
+ returned by gettimeofday doesn't say whether daylight saving is
_currently- active; rather it specifies whether it is *ever*
active.
(EMACS_GET_TZ_OFFSET_AND_SAVINGS): Removed `savings_flag'
1992-09-03 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * editfns.c (Fcurrent_time_string): Change docstring to
- indicate that we will probably add the timezone to the end,
- now that we have it available on many systems.
+ * editfns.c (Fcurrent_time_string): Change docstring to
+ indicate that we will probably add the timezone to the end,
+ now that we have it available on many systems.
* xrdb.c: Don't include <X11/Xos.h>. Under R4, it stupidly
insists on defining SIGCHLD, even if it already has a definition.
otherwise, approximate the right thing, by using min_width and
min_height as the base size.
-1992-09-02 Barry A. Warsaw (warsaw@anthem.nlm.nih.gov)
+1992-09-02 Barry A. Warsaw (warsaw@anthem.nlm.nih.gov)
Extended syntax.c in the following ways to support up to 2
orthogonal comment styles per mode. This is needed for C++.
* doc.c (Fsnarf_documentation): Signal an error if this is
called in a dumped Emacs.
- * alloc.c (mark_object): mark a symbol's name after marking its
+ * alloc.c (mark_object): Mark a symbol's name after marking its
value, function, and property list rather than before; this way,
symbols' names are readable, giving us a chance to detect some
kinds of heap corruption.
versions of HP/UX before 6.5.
Don't define BIG_ENDIAN if it seems that <endian.h> has already
done so.
- [BSD4_3] Define m68000, instead of hp9000s300; crt0.c uses these
+ [BSD4_3] Define m68000, instead of hp9000s300; crt0.c uses these
to decide what sort of startup code to use.
[not BSD4_3] Under HP/UX, always define the BSD memory functions
(bcopy, bzero, and bcmp) in terms of the SYSV string functions
hasn't specified the icon position. Let the window manager put
the icon where it likes.
- * xterm.c (x_make_frame_invisible): Don't forget to check the
+ * xterm.c (x_make_frame_invisible): Don't forget to check the
return value of XWithdrawWindow; it could indicate that the window
wasn't successfully redrawn.
one-line windows are the minibuffer, or that all minibuffers are
one line high. Use MINI_WINDOW_P.
- * systerm.h: Renamed to systty.h, to be more consistent with
+ * systerm.h: Renamed to systty.h, to be more consistent with
everything else in Unix.
* dispnew.c, emacs.c, keyboard.c, process.c, sysdep.c: #include
directive changed.
1992-08-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * fileio.c (Fdo_auto_save): Call Fsleep_for with the appropriate
+ * fileio.c (Fdo_auto_save): Call Fsleep_for with the appropriate
number of arguments.
* fns.c (Fyes_or_no_p): Same.
1992-08-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * xterm.c (x_make_frame_invisible): Use XWithdrawWindow when
+ * xterm.c (x_make_frame_invisible): Use XWithdrawWindow when
available [HAVE_X11R4]; send the UnmapNotify event when
appropriate [HAVE_X11]; just unmap the window if that's all that's
needed [not HAVE_X11].
1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * frame.h (struct frame): New member - explicit_name.
+ * frame.h (struct frame): New member - explicit_name.
* frame.c (make_frame): Clear it.
* xfns.c (x_set_name): Take new argument EXPLICIT, instead of
OLDVAL.
* xterm.c: Doc fixes.
- More SYSV portability changes from Eric Raymond:
+ More SYSV portability changes from Eric Raymond:
* xterm.c [USG5]: Don't include <sys/types.h>.
1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- Applied SYSV portability changes from Eric Raymond:
+ Applied SYSV portability changes from Eric Raymond:
* xrdb.c [USG5]: Define SYSV, and then include <unistd.h>.
Apparently, Xlib.h include string.h if SYSV is defined, and
strings.h if not.
Don't include <sys/types.h>; just declare getuid to return an
- int. Big deal.
+ int. Big deal.
(MAXPATHLEN): If this is not defined by the system's include
- files, give it a value of 256.
+ files, give it a value of 256.
(get_user_db): Fetch the defaults directly from the display
- structure, rather than using XResourceManagerString; that
- function doesn't exist in the older versions of X.
+ structure, rather than using XResourceManagerString; that
+ function doesn't exist in the older versions of X.
* xterm.c (x_set_text_property): New function.
* xfns.c (x_set_name): Use it instead of XSetWMName and
- XSetWMIconName.
+ XSetWMIconName.
* xfns.c (select_visual): Fetch the visual id directly from v;
- don't call XVisualIDFromVisual, since that function is not
- available in earlier versions of X.
+ don't call XVisualIDFromVisual, since that function is not
+ available in earlier versions of X.
* term.c (term_get_fkeys): Some systems define `static' to be the
- empty string, which means that you can't have constant
- initialized arrays inside a function. So move the `keys' array
- outside of the function.
+ empty string, which means that you can't have constant
+ initialized arrays inside a function. So move the `keys' array
+ outside of the function.
* xdisp.c (decode_mode_spec): Same deal, with lots_of_dashes.
* xfns.c (x_make_gc): Same deal, regarding cursor_bits.
* term.c (keys): Include definitions for "K2" (the center key on
- an IBM keypad), "F1" (F11), and "F2" (F12). Handle "k0" and "k;"
- specially; see the code for details.
+ an IBM keypad), "F1" (F11), and "F2" (F12). Handle "k0" and "k;"
+ specially; see the code for details.
* term.c (clear_end_of_line): Remember that on some systems,
- "static" gets defined to be the null string, so we can't declare
- an array to be static and then initialize it. Since the array in
- question (buf) is only one element long, just make it a scalar
- rather than an array; it can then be initialized, even if it's
- not static.
+ "static" gets defined to be the null string, so we can't declare
+ an array to be static and then initialize it. Since the array in
+ question (buf) is only one element long, just make it a scalar
+ rather than an array; it can then be initialized, even if it's
+ not static.
* systime.h [not HAVE_TIMEVAL] (EMACS_USECS, EMACS_SET_USECS):
- Don't forget to define dummy versions of these.
+ Don't forget to define dummy versions of these.
* systime.h [USE_UTIME]: time_t is a typedef, not a struct.
- Don't prefix it with `struct'.
+ Don't prefix it with `struct'.
* systerm.h (EMACS_SET_TTY_PGRP): When there doesn't seem to be
- any way to do this, don't forget to give it a dummy definition.
+ any way to do this, don't forget to give it a dummy definition.
* sysdep.c (select): There's no need to cast the return value of
- signal anymore, since we have the SIGTYPE macro defined.
+ signal anymore, since we have the SIGTYPE macro defined.
* sysdep.c (read_input_waiting): When scanning for quit
- characters, use the value of quit_char, rather than assuming that
- C-g is the quit character. And don't forget to declare i.
+ characters, use the value of quit_char, rather than assuming that
+ C-g is the quit character. And don't forget to declare i.
* sysdep.c [USG5]: Don't include fcntl.h.
utimes(2)) emulation lurking in the X shared libraries.)
* s/usg5-4.h (USE_UTIME): Remove this definition; the C library
- still doesn't have utimes.
+ still doesn't have utimes.
* ralloc.c (get_bloc): When initializing new_bloc->variable, cast
NIL to (POINTER *).
wasn't written portably, and it should probably go somewhere else
anyway - say, funcall or eval.
- End of changes from Eric Raymond.
+ End of changes from Eric Raymond.
* xfns.c (Fx_create_frame): Make the default for the icon-type
- parameter nil, not t. It seems to cause problems with some X
- servers.
+ parameter nil, not t. It seems to cause problems with some X
+ servers.
* lisp.h (DEFVAR_PER_BUFFER): Add new argument, TYPE, to help
check the types of buffer-local variable slots.
* window.c (init_window_once): Initialize minibuf_window before
FRAME_ROOT_WINDOW, so the latter actually points to something.
- * keyboard.c (Fexecute_mouse_event): dyked-out function deleted.
+ * keyboard.c (Fexecute_mouse_event): Dyked-out function deleted.
We're not going to use this mouse interface.
- (Vmouse_window, Vmouse_event, Vmouse_event_function,
- Vmouse_left_hook, Vmap_frame_hook, Vunmap_frame_hook,
- Vmouse_motion_handler): Variables deleted; they were to be used by
+ (Vmouse_window, Vmouse_event, Vmouse_event_function)
+ (Vmouse_left_hook, Vmap_frame_hook, Vunmap_frame_hook)
+ (Vmouse_motion_handler): Variables deleted; they were to be used by
Fexecute_mouse_event.
(syms_of_keyboard): Same.
(command_loop_1): Remove dyked-out code to support
1992-08-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * fileio.c (Fread_filename): Don't add one here.
+ * fileio.c (Fread_filename): Don't add one here.
* minibuf.c (Fcompleting_read): Instead, stop subtracting one
here, so this function lives up to its doc string, which I think
specifies an okay way to work.
* xfns.c [not HAVE_X11] (Fx_create_frame): Delete section that's
only included if we *do* have X11. Blind patching.
- * xfns.c (x_icon): Rewritten to call x_wm_set_icon_position and
+ * xfns.c (x_icon): Rewritten to call x_wm_set_icon_position and
x_wm_set_window_state instead of calling XSetWMHints directly.
* xterm.c (x_wm_hints): New variable.
(x_wm_set_window_state, x_wm_set_icon_pixmap,
1992-08-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * xfns.c (Qbackground_color, Qborder_color, Qborder_width,
- Qcursor_color, Qfont, Qforeground_color, Qgeometry,
- Qhorizontal_scroll_bar, Qicon_left, Qicon_top, Qiconic_startup,
- Qinternal_border_width, Qleft, Qmouse_color, Qparent_id,
- Qsuppress_icon, Qsuppress_initial_map, Qtop, Qundefined_color,
- Qvertical_scroll_bar, Qwindow_id, Qx_frame_parameter): New
+ * xfns.c (Qbackground_color, Qborder_color, Qborder_width)
+ (Qcursor_color, Qfont, Qforeground_color, Qgeometry)
+ (Qhorizontal_scroll_bar, Qicon_left, Qicon_top, Qiconic_startup)
+ (Qinternal_border_width, Qleft, Qmouse_color, Qparent_id)
+ (Qsuppress_icon, Qsuppress_initial_map, Qtop, Qundefined_color)
+ (Qvertical_scroll_bar, Qwindow_id, Qx_frame_parameter): New
symbols, with lisp code to rebuild syms_of_xfns.
(syms_of_xfns): Initialize and staticpro them.
- (Qheight, Qminibuffer, Qname, Qnone, Qonly, Qwidth,
- Qunsplittable): Add extern declaration for these.
+ (Qheight, Qminibuffer, Qname, Qnone, Qonly, Qwidth)
+ (Qunsplittable): Add extern declaration for these.
(x_init_parm_symbols): Don't initialize Qx_frame_parameter here;
it's done in syms_of_xfns.
(x_default_parameter): Change the argument char *PROPNAME into a
(Fx_geometry, x_figure_window_size, x_icon, Fx_create_frame): Use
the new Q... variables, instead of interning things.
- * frame.c (Qheight, Qicon, Qmodeline, Qname, Qnone, Qonly,
- Qunsplittable, Qwidth, Qx): New symbol, with lisp code to rebuild
+ * frame.c (Qheight, Qicon, Qmodeline, Qname, Qnone, Qonly)
+ (Qunsplittable, Qwidth, Qx): New symbol, with lisp code to rebuild
syms_of_frame.
(syms_of_xfns): Initialize and staticpro them.
- (Fframep, Fframe_visible_p, Fframe_parameters): Use
- the new Q... variables, instead of interning things.
+ (Fframep, Fframe_visible_p, Fframe_parameters): Use the new Q...
+ variables, instead of interning things.
(store_in_alist): Change the argument char *PROPNAME into a
Lisp_Object PROP; let the caller take care of interning the atom.
x_set_frame_parameters, not x_set_frame_parameter.
* xfns.c (x_set_frame_param): Replaced by x_set_frame_parameters.
(x_set_frame_parameters): Process the alist of parameters here.
- Notice `width', `height', `top', and `left' parameters.
- Hold off changing the frame size and position until the end, so we
+ Notice `width', `height', `top', and `left' parameters.
+ Hold off changing the frame size and position until the end, so we
can do both parameters at once when they are both specified.
(x_default_parameter): Call x_set_frame_parameters, not
x_set_frame_param.
- * frame.c (Fmake_frame_visible, Fmake_frame_invisible,
- Ficonify_frame, Fframe_parameters, Fmodify_frame_parameters,
- Fset_frame_height, Fset_frame_width, Fset_frame_size,
- Fset_frame_position): Place clauses controlled by FRAME_X_P inside
+ * frame.c (Fmake_frame_visible, Fmake_frame_invisible)
+ (Ficonify_frame, Fframe_parameters, Fmodify_frame_parameters)
+ (Fset_frame_height, Fset_frame_width, Fset_frame_size)
+ (Fset_frame_position): Place clauses controlled by FRAME_X_P inside
`#ifdef HAVE_X_WINDOWS ... #endif' clauses.
* frame.c (Fset_frame_position): Doc fix.
* xterm.c (in_display): Deleted this; it's never used in xterm.c,
and there is another variable by the same name in dispnew.c.
- * frame.c [not MULTI_SCREEN] (Fset_frame_height, Fset_frame_width,
- Fset_frame_size, Fframe_height, Fframe_width): New functions, for
+ * frame.c [not MULTI_SCREEN] (Fset_frame_height, Fset_frame_width)
+ (Fset_frame_size, Fframe_height, Fframe_width): New functions, for
use when Emacs is not compiled with multiple screens.
[not MULTI_SCREEN] (Fset_screen_height, Fset_screen_width):
Functions added for backward compatibility with Emacs 18. These
1992-08-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
* dispnew.c, frame.c, frame.h, keyboard.c, scroll.c, term.c,
- window.c, xdisp.c, xfns.c xterm.c (FRAME_IS_TERMCAP, FRAME_IS_X,
- FRAME_HAS_MINIBUF): Renamed these to FRAME_TERMCAP_P, FRAME_X_P,
+ * window.c, xdisp.c, xfns.c xterm.c (FRAME_IS_TERMCAP, FRAME_IS_X)
+ (FRAME_HAS_MINIBUF): Renamed these to FRAME_TERMCAP_P, FRAME_X_P,
and FRAME_HAS_MINIBUF_P, for consistency with the rest of the
frame macros.
1992-08-06 Joseph Arceneaux (jla@gnu.ai.mit.edu)
- * doc.c (Vdata_directory): Declared.
+ * doc.c (Vdata_directory): Declared.
(syms_of_doc): Initialized.
* fileio.c (Fread_filename): Add 1 to the offset position for the
* editfns.c (Fcurrent_time_zone): New function.
(syms_of_editfns): defsubr it.
- * keyboard.c (read_key_sequence): Clear the eighth bit of the
+ * keyboard.c (read_key_sequence): Clear the eight bit of the
character from the key sequence, NOT the index of the character IN
the key sequence. How many tries will it take to get it right?
* search.c (fast_string_match): New function.
* fileio.c (find_file_handler): New function.
- (Fcopy_file, Fmake_directory, Fdelete_directory, Fdelete_file):
- (Frename_file, Fadd_name_to_file, Fmake_symbolic_link):
+ (Fcopy_file, Fmake_directory, Fdelete_directory, Fdelete_file)
+ (Frename_file, Fadd_name_to_file, Fmake_symbolic_link)
(Ffile_exists_p, Ffile_executable_p, Ffile_readable_p, Ffile_symlink_p)
- (Ffile_writable_p, Ffile_directory_p, Ffile_accessible_directory_p):
- (Ffile_modes, Fset_file_modes, Ffile_newer_than_file_p):
+ (Ffile_writable_p, Ffile_directory_p, Ffile_accessible_directory_p)
+ (Ffile_modes, Fset_file_modes, Ffile_newer_than_file_p)
(Fwrite_region, Fverify_visited_file_modtime):
Use find_file_handler; call the handler and return.
(Finsert_file_contents): Use find_file_handler;
cannot just return after the handler, but must handle VISIT.
(syms_of_fileio): Set up Qcopy_file, etc.
- * dired.c (Fdirectory_files, Ffile_name_completion):
+ * dired.c (Fdirectory_files, Ffile_name_completion)
(Ffile_name_all_completions, Ffile_attributes):
Use find_file_handler; call the handler.
(syms_of_dired): Set Qfile_attributes, etc.
current x_id_name.
* xdisp.c (display_mode_line): If we should set the frame's name,
but there is only one frame currently active, call x_set_name with
- nil as the name; this will display samething generically
+ nil as the name; this will display something generically
appropriate.
1992-07-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
* lread.c: Include <ctype.h> at the top of the file, instead of
just before isfloat_string; read0 wants to use it too.
- * process.c (Fdelete_process, Fprocess_status, Fprocess_send_region,
- Fprocess_send_string, Fprocess_send_eof, Finterrupt_process): Doc
+ * process.c (Fdelete_process, Fprocess_status, Fprocess_send_region)
+ (Fprocess_send_string, Fprocess_send_eof, Finterrupt_process): Doc
fixes.
* process.c (Fprocess_status): Use get_process to find the process
functions describing the size of the characters of a font.
* xterm.h, xterm.c, xselect.c, xmenu.c, xfns.c, xdisp.c, window.h,
- window.c, termopts.h, termhooks.h, termchar.h, term.c sysdep.c,
- scroll.c, screen.c, screen.h, process.c, print.c, minibuf.c,
- lisp.h keyboard.c, indent.c, fns.c, emacs.c, dispnew.c,
- dispextern.h, cm.h, alloc.c, config.h.in: Screens are now called
+ * window.c, termopts.h, termhooks.h, termchar.h, term.c sysdep.c,
+ * scroll.c, screen.c, screen.h, process.c, print.c, minibuf.c,
+ * lisp.h keyboard.c, indent.c, fns.c, emacs.c, dispnew.c,
+ * dispextern.h, cm.h, alloc.c, config.h.in: Screens are now called
frames, to avoid even more confusion with X terminology than
Emacs's "windows" already cause. All macros, functions, and
variables renamed; all uses changed.
* emacs.c (Vkill_emacs_hook): Declare this here; it should have a
docstring, so we might as well DEFVAR it.
- (syms_of_emacs): initialize it, and DEFVAR_LISP it with an
+ (syms_of_emacs): Initialize it, and DEFVAR_LISP it with an
appropriate docstring.
1992-06-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
`horizontal split.'
(make_lispy_event, make_lispy_movement, syms_of_keyboard): Uses
renamed here.
- keyboard.h (Qvertical_split): Extern declaration changed here.
- window.c (Fcoordinates_in_window_p): Changed this to return
+ * keyboard.h (Qvertical_split): Extern declaration changed here.
+ * window.c (Fcoordinates_in_window_p): Changed this to return
`vertical-line' at the appropriate times, rather than
`vertical-split'.
`LINKNAME', to conform with the docstring.
* Makefile.in (CPP): Pass `-Is -Im' to CPP, to make sure that
- machine- and system-dependend files can include each other
+ machine- and system-dependent files can include each other
properly.
* ymakefile (CFLAGS): Add those directories to the #include path
here too.
the `#ifdef MULTI_SCREEN' conditional.
* screen.h [not MULTI_SCREEN] (the_only_screen): extern
declaration for it here.
- [not MULTI_SCREEN] (SCREEN_CURRENT_GLYPHS, SCREEN_DESIRED_GLYPHS,
- SCREEN_TEMP_GLYPHS, SCREEN_HEIGHT, SCREEN_WIDTH,
- SCREEN_NEW_HEIGHT, SCREEN_NEW_WIDTH, SCREEN_CURSOR_X,
- SCREEN_CURSOR_Y, SCREEN_ROOT_WINDOW, SCREEN_INSERT_COST,
- SCREEN_DELETE_COST, SCREEN_INSERTN_COST, SCREEN_DELETEN_COST,
- SCREEN_MESSAGE_BUF, SCREEN_SCROLL_BOTTOM_VPOS): Macros changed to
+ [not MULTI_SCREEN] (SCREEN_CURRENT_GLYPHS, SCREEN_DESIRED_GLYPHS)
+ (SCREEN_TEMP_GLYPHS, SCREEN_HEIGHT, SCREEN_WIDTH)
+ (SCREEN_NEW_HEIGHT, SCREEN_NEW_WIDTH, SCREEN_CURSOR_X)
+ (SCREEN_CURSOR_Y, SCREEN_ROOT_WINDOW, SCREEN_INSERT_COST)
+ (SCREEN_DELETE_COST, SCREEN_INSERTN_COST, SCREEN_DELETEN_COST)
+ (SCREEN_MESSAGE_BUF, SCREEN_SCROLL_BOTTOM_VPOS): Macros changed to
refer to the_only_screen.
- * dispnew.c [not MULTI_SCREEN] (one_screen_cursX,
- one_screen_cursY, one_screen_current_glyphs,
- one_screen_desired_glyphs, one_screen_temp_glyphs,
- delayed_screen_width, delayed_screen_height): Variables
+ * dispnew.c [not MULTI_SCREEN] (one_screen_cursX)
+ (one_screen_cursY, one_screen_current_glyphs)
+ (one_screen_desired_glyphs, one_screen_temp_glyphs)
+ (delayed_screen_width, delayed_screen_height): Variables
deleted; they're all now kept in the_only_screen.
* xdisp.c [not MULTI_SCREEN] (message_buf): Variable deleted; same
fate.
* term.c [not MULTI_SCREEN] (one_screen_width, one_screen_height):
Variables deleted; same fate.
- * screen.h [not MULTI_SCREEN]: extern declarations for the above
+ * screen.h [not MULTI_SCREEN]: Extern declarations for the above
variables removed.
* window.c [not MULTI_SCREEN] (root_window): Variable deleted.
[not MULTI_SCREEN] (init_window_once): Use SCREEN_ROOT_WINDOW to
refer to the root window, instead of referring to it directly.
- * window.h [not MULTI_SCREEN] (root_window): extern declaration
+ * window.h [not MULTI_SCREEN] (root_window): Extern declaration
removed.
* scroll.c [not MULTI_SCREEN] (insert_line_cost, delete_line_cost,
insert_n_lines_cost, delete_n_lines_cost): Variables deleted; same
* dispnew.c [not MULTI_SCREEN] (cursX, cursY): Renamed to
`one_screen_cursX' and `one_screen_cursY'.
- * screen.h [not MULTI_SCREEN] (cursX, cursY, SCREEN_CURSOR_X,
- SCREEN_CURSOR_Y): extern declarations and macros changed
+ * screen.h [not MULTI_SCREEN] (cursX, cursY, SCREEN_CURSOR_X)
+ (SCREEN_CURSOR_Y): Extern declarations and macros changed
accordingly.
* term.c [not MULTI_SCREEN] (screen_width, screen_height): Renamed
conflict with local variables when referenced by the `SCREEN_foo'
macros.
* screen.h [not MULTI_SCREEN] (screen_width, screen_height):
- extern declarations changed accordingly.
- * termchar.h (screen_width, screen_height): extern declarations
+ Extern declarations changed accordingly.
+ * termchar.h (screen_width, screen_height): Extern declarations
deleted. Everyone should go through the `SCREEN_foo' macros.
(SCREEN_WIDTH, SCREEN_HEIGHT): Changed accordingly.
* eval.c (Fsignal): Put call to TOTALLY_UNBLOCK_INPUT under the
protection of a `#ifdef HAVE_X_WINDOWS' conditional.
- * keyboard.c (kbd_buffer_get_event): Expect *mouse_position_hook
+ * keyboard.c (kbd_buffer_get_event): Expect *mouse_position_hook
to return the timestamp as an unsigned long, not a lisp_Object.
This matches the change made to `struct input_event'.
(make_lispy_movement): Change argument TIME to an unsigned long.
* screen.c: Enclose the entire file in a #ifdef MULTI_SCREEN
conditional.
-
1992-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* window.c (Fset_window_dedicated_p):
1992-06-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
- * syntax.h (SYNTAX, SYNTAX_MATCH, SYNTAX_COMSTART_FIRST, etc.)
+ * syntax.h (SYNTAX, SYNTAX_MATCH, SYNTAX_COMSTART_FIRST, etc.):
Cast character to unsigned char before indexing.
1992-06-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
(getloadavg.o): Note that this depends on its source, and config.h.
* screen.c (Fdelete_screen): Typo in loop looking for new
- last_nonminibuf_screen - change `screen = XCONS (screens)->cdr`
- to `screens = XCONS (screens)->cdr`
+ last_nonminibuf_screen - change `screen = XCONS (screens)->cdr`
+ to `screens = XCONS (screens)->cdr`
* xdisp.c (echo_area_display): Don't neglect to draw all the lines
of the minibuffer window (or echo area) when a message is being
* config.h.in: Undefine REL_ALLOC if a system specific file
defines SYSTEM_MALLOC.
- * sysdep.c (save_signal_handlers): Cast result of signal to
+ * sysdep.c (save_signal_handlers): Cast result of signal to
avoid compiler warning.
* process.c (send_process): Likewise.
(Funix_sync): Moved.
* fileio.c (Funix_sync): Moved to here.
- * xfns.c (Fx_erase_rectangle, Fx_draw_rectangle, Fx_contour_region):
+ * xfns.c (Fx_erase_rectangle, Fx_draw_rectangle, Fx_contour_region)
(Fx_uncontour_region): #if 0 these.
(x_rectangle, outline_region): Likewise.
(syms_of_xfns): #if 0 the defsubrs.
indicate that we're awaiting keyboard input.
* dispnew.c (Fsit_for): Rename arguments to match docstring. Use
- NILP instead of EQ (foo, Qnil). If nodisp is non-nil, call
+ NILP instead of EQ (foo, Qnil). If nodisp is non-nil, call
wait_reading_process_input with do_display 0, instead of 1; this
will inhibit spurious redisplays when process input arrives during
a sit-for.
- * process.c (Faccept_process_output): Pass zero as read_kbd
+ * process.c (Faccept_process_output): Pass zero as read_kbd
argument to wait_reading_process_input when PROC is nil, not when
PROC is non-nil.
1992-05-15 Jim Blandy (jimb@pogo.cs.oberlin.edu)
- * ymakefile [defined (__GNUC__) and __GNUC__ > 1]: define
+ * ymakefile [defined (__GNUC__) and __GNUC__ > 1]: Define
YMF_PASS_LDFLAGS so that it can deal with an empty flags argument.
* callproc.c (Fcall_process): Under VMS, a nil INFILE argument
1992-05-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
* termhooks.h: Change timestamp from a Lisp_Object to an unsigned
- long.
+ long.
* keyboard.c (kbd_buffer_store_event): We don't have to apply the
- XINT macro to the timestamp member of the event anymore.
+ XINT macro to the timestamp member of the event anymore.
* process.c (wait_reading_process_output): Don't turn off polling.
1992-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
- * callint.c (Fprefix_numeric_value): Value 1 for symbol other than `-'.
+ * callint.c (Fprefix_numeric_value): Value 1 for symbol other than `-'.
1992-05-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
* process.c (wait_reading_process_input): Make C-g really quit in
sit-for case.
- * ymakefile (LD_SWITCH_SYSTEM): Don't use -X with GCC.
+ * ymakefile (LD_SWITCH_SYSTEM): Don't use -X with GCC.
1992-05-12 Jim Blandy (jimb@pogo.cs.oberlin.edu)
* doc.c (Fdocumentation): Use EQ (x, y) instead of XSYMBOL (x) ==
XSYMBOL (y).
- * doc.c (Fdocumentation): When decyphering a function made from
+ * doc.c (Fdocumentation): When deciphering a function made from
conses, use 'else if' for the chain of alternatives instead of
just 'if'. It used to be that each alternative returned, but
that's not true anymore.
* callint.c (Fcall_interactively): Get symbol's function by
calling indirect_function, instead of just looping.
* doc.c (Fdocumentation): Same.
- * eval.c (Finteractive_p, Fcommandp, do_autoload, Feval,
- Ffuncall): Same.
+ * eval.c (Finteractive_p, Fcommandp, do_autoload, Feval)
+ (Ffuncall): Same.
* keyboard.c (Fcommand_execute): Same.
* data.c (Fsymbol_function): Name the argument `symbol' instead of
* syssignal.h (sigunblock): New macro, taken from 18.58's
emacssignal.h file.
* sysdep.c (request_sigio): Use the sigunblock macro to enable
- reciept of SIGWINCH, instead of the dysfunctional sigblockx.
+ receipt of SIGWINCH, instead of the dysfunctional sigblockx.
1992-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* syssignal.h (sigpause, sigblock, sigunblock, sigsetmask): Macros
removed; they require GCC, and Emacs 19 should compile without GCC.
- (EMACS_SIGPAUSE, EMACS_SIGBLOCK, EMACS_SIGUNBLOCK,
- EMACS_SIGSETMASK, EMACS_SIGFREE, EMACS_SIGHOLDX, EMACS_SIGBLOCKX,
- EMACS_SIGUNBLOCKX, EMACS_SIGPAUSEX): These are new macros that
+ (EMACS_SIGPAUSE, EMACS_SIGBLOCK, EMACS_SIGUNBLOCK)
+ (EMACS_SIGSETMASK, EMACS_SIGFREE, EMACS_SIGHOLDX, EMACS_SIGBLOCKX)
+ (EMACS_SIGUNBLOCKX, EMACS_SIGPAUSEX): These are new macros that
don't require GCC, but expand to statements.
* callproc.c (Fcall_process): Use new EMACS_SIG* macros from
syssignal.h.
* ymakefile (CC, MAKE): Set these variables from optional macros.
Change all uses of `make' to ${MAKE}.
- * ymakefile: use HAVE_X11 as alias for X11.
+ * ymakefile: Use HAVE_X11 as alias for X11.
* ymakefile (LIB_GCC, GNULIB_VAR): Handle GCC 2.
1992-04-21 Jim Blandy (jimb@pogo.cs.oberlin.edu)
-
* callproc.c (egetenv): Declare the type of VAR.
* lisp.h: Don't undefine NULL. There is no longer any conflict.
* process.c (send_process): This used to set a handler to
catch SIGPIPEs when writing to a subprocess, and then set the
handler to SIGDFL after writing, but this would stomp on the
- SIGPIPE handler for for the X connection. So restore the prevous
+ SIGPIPE handler for the X connection. So restore the previous
handler instead of changing to SIGDFL.
1992-04-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* m/pfa50.h: New file.
* process.c (create_process, process_send_signal): Added changes
for m/pfa50.h.
- * sysdep.c: same.
- * unexec.c: same.
+ * sysdep.c: Same.
+ * unexec.c: Same.
1992-03-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
(hfqry, hfskbd): Declare these functions as static before all uses.
* unexaix.c (make_hdr, mark_x, copy_text_and_data, copy_sym):
Declare as static before all uses.
- Remove extraneous semicolons from #ifdefs of COFF and XCOFF
- (unrelocate_symbols): cast the initializers of t_start and d_start
+ Remove extraneous semicolons from #ifdefs of COFF and XCOFF.
+ (unrelocate_symbols): Cast the initializers of t_start and d_start
to ulong.
* s/template.h: Include a clause for the HAVE_TERMIO flag.
* sysdep.c (reset_sys_modes): Doc fix.
- * keyboard.c (sigfree, sigholdx, sigblockx, sigunblockx,
- sigpausex): Definitions moved to syssignal.h.
+ * keyboard.c (sigfree, sigholdx, sigblockx, sigunblockx)
+ (sigpausex): Definitions moved to syssignal.h.
* dispnew.c: Doc fix.
(store_screen_param): If the value of the minibuffer parameter is
a window, try to make it the surrogate minibuffer window.
(Qminibuffer): New variable, to support above change.
- (syms_of_screen): initialize and staticpro it.
+ (syms_of_screen): Initialize and staticpro it.
* m/tad68k.h: New file.
* fileio.c (Ffile_accessible_directory_p): New function.
(syms_of_fileio): defsubr it.
* callproc.c: #include <errno.h>.
- (child_setup): Accept yet another argument, current_dir.
+ (child_setup): Accept yet another argument, current_dir.
Don't try to report an error here if current_dir is inaccessible;
this function is called in a vforking process. Just have the
process exit with an error code.
1992-01-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
- * m-orion105.h (C_DEBUG_SWITCH, LIBS_DEBUG): Defs deleted.
+ * m-orion105.h (C_DEBUG_SWITCH, LIBS_DEBUG): Defs deleted.
1992-01-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
* keyboard.h: New file, for external declarations used in
processing keyboard input and events.
- * lisp.h (Qmode_line, Qvertical_split, num_input_chars,
- poll_suppress_count): Extern declarations moved to keyboard.h.
+ * lisp.h (Qmode_line, Qvertical_split, num_input_chars)
+ (poll_suppress_count): Extern declarations moved to keyboard.h.
* keyboard.c: #include "keyboard.h".
- (Qvscrollbar_par, Qvslider_part, Qvthumbup_part,
- Qvthumbdown_part, Qhscrollbar_part, Qhslider_part,
- Qhthumbleft_part, Qhthumbright_part): Moved declarations here from
+ (Qvscrollbar_par, Qvslider_part, Qvthumbup_part)
+ (Qvthumbdown_part, Qhscrollbar_part, Qhslider_part)
+ (Qhthumbleft_part, Qhthumbright_part): Moved declarations here from
xfns.c, so they're with the other event heading symbols.
* eval.c: #include "keyboard.h".
* ymakefile (callint.o, keyboard.o, keymap.o, xfns.o, eval.o):
Vmouse_screen_part.
(syms_of_xterm): Changed accordingly.
- * keyboard.h (EVENT_HAS_PARAMETERS, EVENT_HEAD, EVENT_WINDOW,
- EVENT_BUFFER_POSN, EVENT_SCROLLBAR_BUTTON, EVENT_WINDOW_POSN,
- EVENT_TIMESTAMP, EVENT_HEAD_UNMODIFIED, EVENT_HEAD_KIND): New
+ * keyboard.h (EVENT_HAS_PARAMETERS, EVENT_HEAD, EVENT_WINDOW)
+ (EVENT_BUFFER_POSN, EVENT_SCROLLBAR_BUTTON, EVENT_WINDOW_POSN)
+ (EVENT_TIMESTAMP, EVENT_HEAD_UNMODIFIED, EVENT_HEAD_KIND): New
macros to recognize and access events that have parameters, like
mouse events.
- * keyboard.c (read_char, echo_char, Fmouse_click_p,
- read_key_sequence): Use them.
+ * keyboard.c (read_char, echo_char, Fmouse_click_p)
+ (read_key_sequence): Use them.
* keymap.c: #include "keyboard.h".
(access_keymap, store_in_keymap, Fsingle_key_description): Use the
macros from keyboard.h.
causes the window to pop to the front every time a message
appears, which isn't desirable.
- * screen.c (Fselect_screen, Fdelete_screen, Fset_mouse_position,
- Fmake_screen_visible, Fmake_screen_invisible, Ficonify_screen,
- Fdeiconify_screen, Fscreen_parameters, Fmodify_screen_parameters,
- Fset_screen_height, Fset_screen_width, Fset_screen_size,
- Fset_screen_position): Use SCREEN_IS_X macro instead of testing
+ * screen.c (Fselect_screen, Fdelete_screen, Fset_mouse_position)
+ (Fmake_screen_visible, Fmake_screen_invisible, Ficonify_screen)
+ (Fdeiconify_screen, Fscreen_parameters, Fmodify_screen_parameters)
+ (Fset_screen_height, Fset_screen_width, Fset_screen_size)
+ (Fset_screen_position): Use SCREEN_IS_X macro instead of testing
for output_x_window.
* xfns.c (adjust_scrollbars, Fx_store_cut_buffer): Same.
to deal with anything other than ASCII.
* keymap.c (current_minor_maps): Rewritten not to use
- function-local static variables, to accomodate DGUX.
+ function-local static variables, to accommodate DGUX.
* xterm.h (UNBLOCK_INPUT): Replace "abort ()" with "(abort (),
0)", to avoid type conflicts on odd systems like Ultrix.
1991-11-26 Michael I Bushnell (mib@geech.gnu.ai.mit.edu)
- * search.c: need to include sys/types.h because of recent mod to
+ * search.c: Need to include sys/types.h because of recent mod to
regex.h.
1991-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
(Flive_screen_p): New lisp predicate.
(syms_of_screen): Initialize, staticpro, and defsubr the lot.
* dispnew.c (Fredraw_screen): Use CHECK_LIVE_SCREEN.
- * screen.c (Fscreen_root_window, Fscreen_selected_window,
- Fnext_screen, Fset_mouse_position, Frestore_screen_configuration,
- Fmake_screen_visible, Fmake_screen_invisible, Ficonify_screen,
- Fdeiconify_screen, Fscreen_visible_p, Fredirect_screen_focus,
- Fscreen_focus, Fmodify_screen_parameters, Fset_screen_height,
- Fset_screen_width, Fset_screen_size, Fset_screen_position,
- Fselect_screen): Use CHECK_LIVE_SCREEN.
+ * screen.c (Fscreen_root_window, Fscreen_selected_window)
+ (Fnext_screen, Fset_mouse_position, Frestore_screen_configuration)
+ (Fmake_screen_visible, Fmake_screen_invisible, Ficonify_screen)
+ (Fdeiconify_screen, Fscreen_visible_p, Fredirect_screen_focus)
+ (Fscreen_focus, Fmodify_screen_parameters, Fset_screen_height)
+ (Fset_screen_width, Fset_screen_size, Fset_screen_position)
+ (Fselect_screen): Use CHECK_LIVE_SCREEN.
* window.c (Fwindow_at, Fcurrent_window_configuration): Use
CHECK_LIVE_SCREEN.
* xfns.c (Ffocus_screen, Fx_pixel_width, Fx_pixel_height): Use
screen's only window is a minibuffer, aka a "minibuffer screen" or
a "minibuffer-only" screen.
* dispnew.c (change_screen_size): Use it.
- * screen.c (Fselect_screen, next_screen, prev_screen,
- Fdelete_screen): Use it.
+ * screen.c (Fselect_screen, next_screen, prev_screen)
+ (Fdelete_screen): Use it.
* window.c (Fdisplay_buffer): Use it.
* screen.c (next_screen, prev_screen): Make MINIBUF a lisp
(mouse_position_hook): New, simpler interface.
* keyboard.c (struct movement, movement_buf, movement_ptr):
Replaced by...
- (mouse_moved): This flag, to be used in conjuction with
+ (mouse_moved): This flag, to be used in conjunction with
mouse_position_hook.
(EVENT_QUEUES_EMPTY): Adjusted to use mouse_moved instead of
movement_buf and movement_ptr.
(pixel_to_glyph_coords, construct_mouse_click,
note_mouse_position, XTmouse_position): Put these all on the same
page.
- (XTread_socket): case MotionNotify, call note_mouse_position with
+ (XTread_socket): Case MotionNotify, call note_mouse_position with
the right args; don't call pixel_to_glyph_translation.
(x_term_init): Set mouse_position_hook instead of
mouse_tracking_enable_hook.
* scroll.c (scroll_cost): Logic rearranged.
* dispnew.c (change_screen_size): Change "SCREEN_IS_TERMCAP
- (screen) == output_termap" to "SCREEN_IS_TERMCAP (screen)"
+ (screen) == output_termap" to "SCREEN_IS_TERMCAP (screen)".
(window_change_signal): Use SCREEN_IS_TERMCAP predicate instead of
testing output_method_directly.
* keyboard.c (kbd_buffer_read_char): Renamed to
kbd_buffer_get_event, for consistency with kbd_buffer_store_event.
- * window.c (Fwindow_at): modified to take the coordinates as a
+ * window.c (Fwindow_at): Modified to take the coordinates as a
pair, not a two-element list, for ease of use and compatibility
with events. Make SCREEN argument second and optional.
(Fcoordinates_in_window_p): Modified to take and return the
* window.c (coordinates_in_window): Make it static.
* window.c (Flocate_window_from_coordinates): Renamed to
- Fwindow_at.
+ Fwindow_at.
(syms_of_window): Adjusted.
* lisp.h: Adjusted to say so.
last_event_timestamp.
* xselect.c (mouse_timestamp): Don't use this anymore.
(last_event_timestamp): Use this instead.
- (Fx_own_selection, Fx_own_clipboard, Fx_get_selection,
- Fx_get_clipboard): Use last_event_timestamp instead of
+ (Fx_own_selection, Fx_own_clipboard, Fx_get_selection)
+ (Fx_get_clipboard): Use last_event_timestamp instead of
mouse_timestamp.
* xdisp.c (redisplay): Don't pass extra arguments to
1991-08-15 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
* bytecode.c (Qbyte_code_meter): New.
- (Bend_of_line, Bset_marker, Bmatch_beginning, Bmatch_end, Bupcase,
- Bdowncase, BRgoto, BRgotoifnil, BRgotoifnonnil,
- BRgotoifnilelsepop, BRgotoifnonnilelsepop, BlistN, BconcatN): New
+ (Bend_of_line, Bset_marker, Bmatch_beginning, Bmatch_end, Bupcase)
+ (Bdowncase, BRgoto, BRgotoifnil, BRgotoifnonnil)
+ (BRgotoifnilelsepop, BRgotoifnonnilelsepop, BlistN, BconcatN): New
byte codes.
(Fbyte_code): Implemented new codes listed above. Added code to
count how many times a function is called.
* eval.c (Qinhibit_quit): New variable, to support Aug 5 changes
to process.c.
(syms_of_eval): Initialize and staticpro above.
- * lisp.h: added extern declaration for above.
+ * lisp.h: Added extern declaration for above.
1991-08-10 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
(this_filter, filter_process, filter_string): Variables now
unnecessary.
- * xfns.c (Fx_get_resource): Take the screen name as an optional
+ * xfns.c (Fx_get_resource): Take the screen name as an optional
argument and look up resources using the name of the screen as
part of the key.
[not HAVE_X11] (Fx_get_default): Take optional 2nd arg NAME and
(Fx_create_screen): Don't use it here.
* keyboard.c (classify_object): #if 0'd function finally removed.
- * xterm.c (Qmapped_screen, Qunmapped_screen, Qexited_scrollbar,
- Qexited_window, Qredraw_screen): Unused, so removed.
+ * xterm.c (Qmapped_screen, Qunmapped_screen, Qexited_scrollbar)
+ (Qexited_window, Qredraw_screen): Unused, so removed.
(syms_of_xterm): Don't bother to initialize above.
* xterm.c (init_input_symbols): Renamed to syms_of_xterm, for
1991-07-26 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
- * keyboard.c (command_loop_1): pass both arguments to
+ * keyboard.c (command_loop_1): Pass both arguments to
Fselect_screen.
* screen.c (make_screen): Divide the size by sizeof (Lisp_Object)
before passing it to Fmake_vector.
- * screen.h [not MULTI_SCREEN] (SCREEN_SCROLL_BOTTOM_VPOS): fixed
+ * screen.h [not MULTI_SCREEN] (SCREEN_SCROLL_BOTTOM_VPOS): Fixed
definition.
* screen.c: #include termhooks.h and therefore stdio.h.
(Fselect_window): Removed grunge to support minibuffer hack.
* screen.h (struct screen): Added focus_screen member, and
accessor for it.
- * alloc.c (mark_object): mark focus_screen member of Lisp_Screens.
+ * alloc.c (mark_object): Mark focus_screen member of Lisp_Screens.
* xterm.c (XTscreen_rehighlight): Use the focus_screen member to
decide which screen to highlight.
(XTread_socket): Use focus_screen when enqueuing keystrokes.
[HAVE_SHM] (init_alloc_once): Initialize pure_size here.
* lisp.h [HAVE_SHM] (XPNTR): Defined in terms of pure_size,
instead of PURESIZE.
- (pure_size): extern declaration added here.
+ (pure_size): Extern declaration added here.
* ymakefile: Added puresize.h to dependencies for alloc.c and
data.c's .o files.
* minibuf.c (assoc_for_completion): New function.
(do_completion): Use that to check for exact match.
- * minibuf.c (Ftry_completion): Fix handling of matches aside from
+ * minibuf.c (Ftry_completion): Fix handling of matches aside from
case. If ignoring case, and all else equal, try to preserve the
case of the characters in the input.
* process.c (status_notify): GCPRO tail.
- * sysdep.c (creat_copy_attrs, rename_sans_version): Always set
+ * sysdep.c (creat_copy_attrs, rename_sans_version): Always set
protection to O:REWD when creating file. Added new function
rename_sans_version, which strips the version number from the target
- filename, renames the temporary file to this filename, and then
+ filename, renames the temporary file to this filename, and then
sets the file protection of this new file to be the same as the file
being edited.
* sysdep.c: If HAVE_TERMIOS is not defined, define tcgetattr in
terms of the TIOCGETP ioctl.
(init_sys_modes): Handle VSUSP, V_DSUSP if HAVE_TCATTR.
- (discard_tty_input, init_baud_rate, child_setup_tty,
- init_sys_modes, tabs_safe_p, reset_sys_modes):
+ (discard_tty_input, init_baud_rate, child_setup_tty)
+ (init_sys_modes, tabs_safe_p, reset_sys_modes):
Use tcgetattr, and if HAVE_TCATTR, use tcsetattr.
1991-07-13 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
1991-06-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
- * buffer.h (struct buffer_text, struct buffer): small change to
+ * buffer.h (struct buffer_text, struct buffer): Small change to
comments.
* search.c (Fmatch_beginning, Fmatch_end): Fixed doc strings to
* keyboard.c (kbd_buffer_read_char): Fix wait-for-input loop so
that we always process/toss events we don't want to return.
- * screen.c (Fselect_screen): Call Ffocus_screen instead of
+ * screen.c (Fselect_screen): Call Ffocus_screen instead of
x_new_selected_screen, which doesn't exist anymore.
* xfns.c (Ffocus_screen): Declare the type of the SCREEN argument.
since all we really need is x_focus_screen; all other issues are
the realm and responsibility of the window manager.
(x_new_selected_screen): Renamed to x_new_focus_screen, and
- modified not to do thiogs inappropriate for signal handlers.
+ modified not to do things inappropriate for signal handlers.
(XTread_socket): Change the handling of EnterNotify, LeaveNotify,
FocusOut and FocusIn events to use x_new_selected_screen, and
ditched code that deals with x_mouse_screen and x_input_screen,
readable events.
(tracking_off): Call readable_events to see if we should
redisplay.
- (kbd_buffer_read_char): Toss events that we are not interested in.
+ (kbd_buffer_read_char): Toss events that we are not interested in.
This is a better place to do it than trim_events, since we know
that do_mouse_tracking will not change. Also, handle
screen_selected events.
that; otherwise, the while loop lied.
(make_lispy_event): Added code to produce mouse movement events.
(init_keyboard): Clear the mouse movement buffer.
- (Qmouse_moved, Qredraw_screen, Qmapped_screen, Qunmapped_screen,
- Qexited_window, Qexited_scrollbar): Removed extern declarations
+ (Qmouse_moved, Qredraw_screen, Qmapped_screen, Qunmapped_screen)
+ (Qexited_window, Qexited_scrollbar): Removed extern declarations
for these, since they're no longer generated.
(syms_of_keyboard): Initialize and staticpro Qmouse_movement,
remove DEFVAR_LISP for Vignore_mouse_events.
(Ftrack_mouse): A new function to enable mouse tracking for a
block of code.
(tracking_off): A function for unwind_protection; restore the
- mouse tracking state to what it was outside of the track-mouse
+ mouse tracking state to what it was outside of the track-mouse.
(syms_of_keyboard): defsubr track-mouse.
(make_lispy_event): Find the window io which the click occurred
when processing mouse_click events, instead of trusting the window
* termhooks.h (struct input_event): Change the .window member to
.screen, make it a struct screen *, and indicate that those events
- which used to return windows now return screens. It is unsafe
+ which used to return windows now return screens. It is unsafe
for the event reader to traverse the window structure, because it
can be called by a signal handler.
* keyboard.c (do_mouse_tracking): Define this variable, which
controls whether kbd_buffer_read_char will ignore button up and
mouse movement events.
- * termhooks.h: Declare do_mouse_tracking here.
+ * termhooks.h: Declare do_mouse_tracking here.
- * xterm.h (STANDARD_EVENT_SET): New constant, giving the event
+ * xterm.h (STANDARD_EVENT_SET): New constant, giving the event
mask all the windows use.
* xfns.c (Vx_send_mouse_movement_events): Removed this variable;
1991-04-16 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
- * bytecode.c (PUSH): Alliant can't be bothered to implement the
+ * bytecode.c (PUSH): Alliant can't be bothered to implement the
preincrement operator right, so use a comma.
- * print.c (syms_of_print): staticpro Qexternal_debugging_output.
+ * print.c (syms_of_print): staticpro Qexternal_debugging_output.
* editfns.c (clip_to_bounds): No longer static - used in window.c.
* window.c (unshow_buffer): Use clip_to_bounds to make sure we
* eval.c (Fcondition_case): Initialize the `handler_list' member
of the catchtag.
- * keyboard.c (read_char): reset recent_keys_index when it is
+ * keyboard.c (read_char): Reset recent_keys_index when it is
greater than OR EQUAL to the number of elements in recent_keys,
stupid.
1991-03-19 Jim Blandy (jimb@churchy.ai.mit.edu)
- * keyboard.c (kbd_buffer_store_event, kbd_buffer_read_char,
- read_key_sequence, Fexecute_extended_command, Fset_input_mode,
- init_keyboard, syms_of_keyboard): Use XSET (var, Lisp_Int, exp)
+ * keyboard.c (kbd_buffer_store_event, kbd_buffer_read_char)
+ (read_key_sequence, Fexecute_extended_command, Fset_input_mode)
+ (init_keyboard, syms_of_keyboard): Use XSET (var, Lisp_Int, exp)
instead of XSETINT (var, exp) in those cases where var is not
known to already be a Lisp_Int.
* search.c (skip_chars): Same.
1991-03-17 Jim Blandy (jimb@geech.ai.mit.edu)
- * keymap.c (Fcopy_keymap, Faccessible_keymaps, describe_map,
- append_key): Minor typos and brainos corrected.
+ * keymap.c (Fcopy_keymap, Faccessible_keymaps, describe_map)
+ (append_key): Minor typos and brainos corrected.
* keyboard.c (read_char): Removed code to find the vector in a
(kbd-macro . VECTOR) - style macro, since the macro is represented
1991-03-12 Jim Blandy (jimb@wookumz.ai.mit.edu)
- * commands.h, lisp.h: Changed global_map and current_global_map to
+ * commands.h, lisp.h: Changed global_map and current_global_map to
be Lisp_Objects, not Lisp_Vectors.
keyboard.c (read_key_sequence): Same.
- keymap.c (Fkey_binding, Fglobal_key_binding, Fglobal_set_key,
- Fuse_global_map, Fwhere_is_internal, describe_buffer_bindings,
- syms_of_keymap): Same.
+ keymap.c (Fkey_binding, Fglobal_key_binding, Fglobal_set_key)
+ (Fuse_global_map, Fwhere_is_internal, describe_buffer_bindings)
+ (syms_of_keymap): Same.
* keymap.c (Fdefine_key): Braino: increment idx and clear metized
flag even when the element of the key sequence isn't a character.
function; static variables inside functions don't always work in
Emacs.
- * editfns.c (in_accessible_range): Deleted - insufficently
+ * editfns.c (in_accessible_range): Deleted - insufficiently
general.
(clip_to_bounds): New function, much like in_accessible_range,
except that the upper and lower bounds are arguments.
(read_char_menu_prompt): Allocate `menu' buffer using alloca,
instead of a variable-sized array, which is gcc-specific.
(Frecent_keys): Return the most recent "keystrokes" as a vector,
- to accomodate lispy events.
- (Fset_input_mode): Accomodate non-characters as quit keys. If
+ to accommodate lispy events.
+ (Fset_input_mode): Accommodate non-characters as quit keys. If
this is a bad thing, init_sys_modes will tell us.
(init_keyboard): this_command_keys is now an array of
Lisp_Objects; adjust the amount of storage we request to hold it.
1991-02-23 Jim Blandy (jimb@pogo.ai.mit.edu)
- * keyboard.c: (recent_keys, this_command_keys,
- menu_prompt_more_char, help_char, last_command_char, quit_char,
- last_input_char): Changed to Lisp_Objects, so we can use function
+ * keyboard.c (recent_keys, this_command_keys)
+ (menu_prompt_more_char, help_char, last_command_char, quit_char)
+ (last_input_char): Changed to Lisp_Objects, so we can use function
keys for them.
(Vglobal_function_map): Variable deleted.
(echo_char): Echo function keys too. The argument C is now a
longer convert X keycodes to symbols in this section of code.
(x_convert_modifiers): New function to turn the X modifier bits
into struct input_event modifier bits.
- (encode_mouse_button): removed, since this work isn't done here
+ (encode_mouse_button): Removed, since this work isn't done here
anymore.
(Vx_send_mouse_movement_events): Add an extern declaration for
this.
* xterm.c (construct_mouse_event): Construct a struct input_event
instead of a lispy event.
- * screen.c (coordinates_in_window): Added explanatory comment.
+ * screen.c (coordinates_in_window): Added explanatory comment.
(window_from_coordinates): Change PART, whose returned values are
dependent on X-windows, to be called MODELINE_P, with appropriate
new return values.
1991-02-18 Jim Blandy (jimb@pogo.ai.mit.edu)
- * termhooks.h: Added up_modifier to the enum for modifier bits;
+ * termhooks.h: Added up_modifier to the enum for modifier bits;
this bit will be applied to mouse events.
(struct input_event): Changed specification of non_ascii_keystroke
events to send the function key number instead of a symbol.
routines which enqueue them can be called from signal handlers,
and therefore should not cons.
- * keyboard.c: (kbd_buffer, kbd_fetch_ptr, kbd_store_ptr): Change
+ * keyboard.c (kbd_buffer, kbd_fetch_ptr, kbd_store_ptr): Change
these to be of type `struct input_event *'.
(kbd_buffer_store_event): Manipulate struct input_events instead
of lisp objects.
1991-02-13 Jim Blandy (jimb@pogo.ai.mit.edu)
- * xterm.c (init_input_symbols): remove the `xk-' prefix from all
+ * xterm.c (init_input_symbols): Remove the `xk-' prefix from all
the function key symbols, since they're going to be used for
function keys from all sorts of terminals, not just when running
under X.
1991-02-05 Jim Blandy (jimb@geech.ai.mit.edu)
* sysdep.c, s-aix3-1.h, s-hpux.h, s-iris3-5.h, s-iris3-6.h,
- s-irix3-3.h, s-rtu.h, s-sunos4-1.h, s-unipl5-0.h, s-unipl5-2.h,
- s-usg5-0.h, s-usg5-2-2.h, s-usg5-2.h, s-usg5-3.h, s-xenix.h:
+ * s-irix3-3.h, s-rtu.h, s-sunos4-1.h, s-unipl5-0.h, s-unipl5-2.h,
+ * s-usg5-0.h, s-usg5-2-2.h, s-usg5-2.h, s-usg5-3.h, s-xenix.h:
Globally replaced INTERRUPTABLE with INTERRUPTIBLE.
* xterm.c (construct_mouse_event): Renamed to
construct_mouse_click, since there are kinds of mouse events
besides clicks (movement, for example).
- (XTread_socket): rename calls here.
+ (XTread_socket): Rename calls here.
- * xterm.c (mapped_screen_symbol, unmapped_screen_symbol,
- exited_scrollbar_symbol, exited_window_symbol,
- redraw_screen_symbol, mouse_moved_symbol): Renamed to
+ * xterm.c (mapped_screen_symbol, unmapped_screen_symbol)
+ (exited_scrollbar_symbol, exited_window_symbol)
+ (redraw_screen_symbol, mouse_moved_symbol): Renamed to
Qmapped_screen, Qunmapped_screen, Qexited_scrollbar,
Qexited_window, Qredraw_screen, Qmouse_moved, to agree with naming
conventions elsewhere in Emacs.
- * xfns.c (text_part_sym, modeline_part_sym,
- vertical_scrollbar_sym, vertical_slider_sym, vertical_thumbup_sym,
- vertical_thumbdown_sym, horizontal_scrollbar_sym,
- horizontal_slider_sym, horizontal_thumbleft_sym,
- horizontal_thumbright_sym): Renamed to Qtext_part, Qmodeline_part,
+ * xfns.c (text_part_sym, modeline_part_sym)
+ (vertical_scrollbar_sym, vertical_slider_sym, vertical_thumbup_sym)
+ (vertical_thumbdown_sym, horizontal_scrollbar_sym)
+ (horizontal_slider_sym, horizontal_thumbleft_sym)
+ (horizontal_thumbright_sym): Renamed to Qtext_part, Qmodeline_part,
Qvscrollbar_part, Qvslider_part, Qvthumbup_part, Qvthumbdown_part,
Qhscrollbar_part, Qhslider_part, Qhthumbleft_part,
Qhthumbright_part, to agree with the naming conventions elsewhere
variables renamed to Vmouse_screen_part,
Vx_send_mouse_movement_events.
- * lread.c (Feval_buffer): function deleted.
+ * lread.c (Feval_buffer): Function deleted.
(Feval_current_buffer): Removed "#if 0 ... #endif" around this
function.
* xterm.h: Added external declaration for x_focus_screen.
* search.h: File deleted.
- * buffer.h: declare searchbuf here instead.
+ * buffer.h: Declare searchbuf here instead.
* screen.c (Ffocus_screen, Funfocus_screen): Moved these functions
to xfns.c, since they're x-specific.
cursor in its filled and hollow forms.
* xterm.h (enum text_cursor_kinds): Added enum for the different
kinds of cursors which might be displayed in a window.
- (struct x_display): added member `text_cursor_kind' which says
+ (struct x_display): Added member `text_cursor_kind' which says
which kind of cursor is currently being displayed in the window, so
we can arrange to redraw it effectively.
1991-01-28 Jim Blandy (jimb@geech.ai.mit.edu)
- * ymakefile: noted that callint.o depends on mocklisp.h,
+ * ymakefile: Noted that callint.o depends on mocklisp.h,
and dired.o on search.h.
* environ.h: Deleted - its creation in the first place was misguided.
1991-01-27 Jim Blandy (jimb@geech.ai.mit.edu)
- * lisp.h (struct handler): add poll_suppress_count member, so
+ * lisp.h (struct handler): Add poll_suppress_count member, so
we can restore poll_suppress_count when we handle an error.
* eval.c (struct catchtag): Add it here too, for throws.
(internal_catch, Fcondition_case, internal_condition_case): Record
1991-01-15 Jim Blandy (jimb@geech.ai.mit.edu)
- * doc.c (Fsnarf_documentation): handle attaching docstrings to
+ * doc.c (Fsnarf_documentation): Handle attaching docstrings to
bytecode objects too.
- * syntax.h (syntax_spec_code): make external declaration for this
+ * syntax.h (syntax_spec_code): Make external declaration for this
unsigned char to match the definition in syntax.c.
- * indent.c (compute_motion): added comments describing how it
+ * indent.c (compute_motion): Added comments describing how it
can be used.
1991-01-15 Richard Stallman (rms@mole.ai.mit.edu)
(FIRST_PTY_LETTER): Overridden.
(PTY_NAME_SPRINTF, PTY_TTY_NAME_SPRINTF, SETUP_SLAVE_PTY): New macros.
- * m-ibmrs6000.h (CANNOT_DUMP): Undefine it.
+ * m-ibmrs6000.h (CANNOT_DUMP): Undefine it.
(UNEXEC): Define it.
(PURE_SEG_BITS, SHMKEY): Define only if CANNOT_DUMP.
(LINKER): Override it. Then add -bnodelcsect.
1991-01-12 Jim Blandy (jimb@pogo.ai.mit.edu)
- * dispnew.c (buffer_posn_from_coords): compute_motion starting
+ * dispnew.c (buffer_posn_from_coords): Compute_motion starting
from bufp[y] instead of counting from the top of the window.
1991-01-11 Richard Mlynarik (mly@pizza.ai.mit.edu)
- * window.c (window-configuration-p): Needed. Added.
+ * window.c (window-configuration-p): Needed. Added.
1991-01-11 Jim Blandy (jimb@churchy.ai.mit.edu)
* alloc.c (Fmake_byte_code): Flesh out docstring.
- * window.c (window_loop): pick the first window correctly, even
+ * window.c (window_loop): Pick the first window correctly, even
when screen == 0.
* dispnew.c (scroll_screen_lines): Don't forget to call
highlight_face, since they're part of the interval code, and
shouldn't be installed yet.
- * dispnew.c (init_display): calculate_costs expects a screen
+ * dispnew.c (init_display): Calculate_costs expects a screen
parameter; pass selected_screen, instead of nothing.
* search.c (Freplace_match): Protect STRING.
* process.c (run_filter): New function.
(read_process_output, exec_sentinel): Use run_filter to call the
process's filter function.
- (status_notify): GCPro MSG.
- * process.c (Fopen_network_stream): Protect various args.
+ (status_notify): GCPro MSG.
+ * process.c (Fopen_network_stream): Protect various args.
* print.c (Fprin1_to_string, Fprint): Protect OBJ.
* lread.c (Feval_region): Check type of B.
* keymap.c (describe_alist): Protect ELT_PREFIX and TEM2.
point directly.
* window.c (Fselect_window): Here too.
- * xdisp.c (redisplay_all_windows): removed static declaration for
+ * xdisp.c (redisplay_all_windows): Removed static declaration for
this nonexistent function.
1991-01-04 Jim Blandy (jimb@pogo.ai.mit.edu)
- * window.c (window_loop): neatened up. MINI being non-zero now
+ * window.c (window_loop): Neatened up. MINI being non-zero now
makes it recognize active minibuffer windows. Iterates properly
over multiple screens when asked nicely.
(Fget_lru_window, Fget_largest_window): SCREENS arguments are now
* scroll.c (do_scrolling): Use correct limits on loop to clear
lines just inserted--old version lost a line.
- * screen.c: #ifdef HAVE_X_WINDOWS, #include xterm.h
- (Ffocus_screen, Funfocus_screen): use Joe's new definitions, and
+ * screen.c: #ifdef HAVE_X_WINDOWS, #include xterm.h.
+ (Ffocus_screen, Funfocus_screen): Use Joe's new definitions, and
only define these functions ifdef HAVE_X_WINDOWS.
- (window_from_coordinates): use next_screen_window instead of
+ (window_from_coordinates): Use next_screen_window instead of
Fnext_window, so that global minibuffers work.
* lread.c (syms_of_read): Don't forget to defsubr
read-char-exclusive.
- * lisp.h (Fscreenp, Fselect_screen, Ffocus_screen,
- Funfocus_screen, Fselected_screen, Fwindow_screen,
- Fscreen_root_window, Fscreen_selected_window, Fscreen_list,
- Fnext_screen, Fdelete_screen, Fread_mouse_position,
- Fset_mouse_position, Fmake_screen_visible, Fmake_screen_invisible,
- Ficonify_screen, Fdeiconify_screen, Fscreen_visible_p,
- Fvisible_screen_list, Fscreen_parameters,
- Fmodify_screen_parameters, Fscreen_pixel_size, Fscreen_height,
- Fscreen_width, Fset_screen_height, Fset_screen_width,
- Fset_screen_size, Fset_screen_position, Fcoordinates_in_window_p,
- Flocate_window_from_coordinates, Frubber_band_rectangle): added
+ * lisp.h (Fscreenp, Fselect_screen, Ffocus_screen)
+ (Funfocus_screen, Fselected_screen, Fwindow_screen)
+ (Fscreen_root_window, Fscreen_selected_window, Fscreen_list)
+ (Fnext_screen, Fdelete_screen, Fread_mouse_position)
+ (Fset_mouse_position, Fmake_screen_visible, Fmake_screen_invisible)
+ (Ficonify_screen, Fdeiconify_screen, Fscreen_visible_p)
+ (Fvisible_screen_list, Fscreen_parameters)
+ (Fmodify_screen_parameters, Fscreen_pixel_size, Fscreen_height)
+ (Fscreen_width, Fset_screen_height, Fset_screen_width)
+ (Fset_screen_size, Fset_screen_position, Fcoordinates_in_window_p)
+ (Flocate_window_from_coordinates, Frubber_band_rectangle): Added
extern declarations for all these.
- * lisp.h (Qscreenp): added an extern declaration for this.
+ * lisp.h (Qscreenp): Added an extern declaration for this.
* lisp.h (DBL_DIG): Added constant for the maximum number of
decimal digits a float could print to. Used in print.c.
* keymap.c (Fkey_description): Produce pretty descriptions of
mouse and window system events too.
- (Fsingle_key_description): signal an error if obj is not a key.
+ (Fsingle_key_description): Signal an error if obj is not a key.
* data.c (Fkeyp, Qkeyp): Added predicate to recognize things which
can be bound - this includes keys, symbols (for function keys and
(classify_object): Place the object in read_key_sequence_cmd.
- (Fread_key_sequence): recognize that when read_key_sequence
+ (Fread_key_sequence): Recognize that when read_key_sequence
returns -1 or -2, it's a mouse event or window system event.
1991-01-01 Jim Blandy (jimb@pogo.ai.mit.edu)
(Fdo_auto_save): Don't call run-hooks before it's defined. This
only happens before emacs is dumped, when loading inc-vers.el.
- * eval.c (Fsignal): TOTALLY_UNBLOCK_INPUT here.
+ * eval.c (Fsignal): TOTALLY_UNBLOCK_INPUT here.
(error): Not here.
(Feval): We use argvals[0..5], so declare it to have six elements
1990-12-28 Jim Blandy (jimb@geech.ai.mit.edu)
- * print.c (print): put obj in a non-register variable so
+ * print.c (print): Put obj in a non-register variable so
we could gcpro it. Also fixed some syntax errors.
- * editfns.c (Fformat): declare nstrings, and declare nstrings and
+ * editfns.c (Fformat): Declare nstrings, and declare nstrings and
strings in a local block.
(Fformat): XFLOAT(args[n]) isn't a float; ->data is.
1990-12-05 Jim Blandy (jimb@pogo.ai.mit.edu)
- * keyboard.c (Fsuspend_emacs): Protect STUFFSTRING.
+ * keyboard.c (Fsuspend_emacs): Protect STUFFSTRING.
(cmd_error): Protect TAIL while printing.
(input_poll_signal, start_polling): Use polling_period.
(syms_of_keyboard): Initialize it and make it a Lisp var.
* eval.c (Fbacktrace): gcpro TAIL.
* emacs.c (Fkill_emacs): gcpro ARG.
- * editfns.c (Fformat): remove remains of gcpro'd args.
+ * editfns.c (Fformat): Remove remains of gcpro'd args.
* dispnew.c (syms_of_dispnew): Don't clobber Vwindow_system_version
if CANNOT_DUMP.
1990-12-03 Jim Blandy (jimb@geech.ai.mit.edu)
- * callproc.c (Fcall_process): change synch_process_pid to
+ * callproc.c (Fcall_process): Change synch_process_pid to
synch_process_alive, as a general flag that we are waiting for
a synchronous process to die. This obviates the need to block
SIGCHLDs until we know the pid.
- * sysdep.c (wait_for_termination): wait for synch_process_alive to
+ * sysdep.c (wait_for_termination): Wait for synch_process_alive to
be false.
* process.c (sigchld_handler): If pid not recognized, look for a
1990-11-20 Jim Blandy (jimb@churchy.ai.mit.edu)
- * print.c (Fexternal_debugging_output): added new function which
+ * print.c (Fexternal_debugging_output): Added new function which
writes a character to stderr, for use when debugging emacs with
gdb.
1990-11-14 Jim Blandy (jimb@churchy.ai.mit.edu)
- * dispnew.c (window_change_signal): used to assume that SIGWINCHes
+ * dispnew.c (window_change_signal): Used to assume that SIGWINCHes
always applied to the currently selected screen. Now it scans the
list of screens for a screen controlled by termcap, and changes that
screen's size.
* regex.c: Disabled definition of NULL from lisp.h
- * crt0.c (_start): added static declaration of start1.
+ * crt0.c (_start): Added static declaration of start1.
- * xfns.c: added definition for Vbar_cursor.
+ * xfns.c: Added definition for Vbar_cursor.
(syms_of_xfns): Added DEFVAR_LISP clause for Vbar_cursor.
- * xterm.c (XTread_socket): passed &event.xkey instead of &event to
+ * xterm.c (XTread_socket): Passed &event.xkey instead of &event to
XLookupString, so things will typecheck nicely.
* Globally rewrote all references to Vmouse_buffer to use the
buffer viewed by Vmouse_window instead.
- * alloc.c (xmalloc, xrealloc): removed calls to
+ * alloc.c (xmalloc, xrealloc): Removed calls to
{un,}hold_window_change. The new SIGWINCH-handling code and
do_pending_window_change make them unnecessary.
1990-10-29 Jim Blandy (jimb@pogo.ai.mit.edu)
- * indent.c (position_indentation): renamed stray `bf_cur' to
+ * indent.c (position_indentation): Renamed stray `bf_cur' to
`current_buffer', and old `CharAt' usages to `FETCH_CHAR'.
- * buffer.c (Fbuffer_disable_undo): the symbol object for this
+ * buffer.c (Fbuffer_disable_undo): The symbol object for this
subroutine was still named Sbuffer_flush_undo, and the symbol's
lisp name was similarly out of date. Renamed both, and added an
alias in lisp/subr.el .
- * keyboard.c (Fset_input_mode): a `meta_flag' had escaped being
+ * keyboard.c (Fset_input_mode): A `meta_flag' had escaped being
renamed to `meta_key'.
1990-10-29 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-29 Jim Blandy (jimb@pogo.ai.mit.edu)
- * window.c (Fset_window_start, window_scroll): renamed stray
+ * window.c (Fset_window_start, window_scroll): Renamed stray
references to `redo_mode_line' to `update_mode_line'.
- * xdisp.c (decode_mode_spec): renamed stray references to `bf_cur'
+ * xdisp.c (decode_mode_spec): Renamed stray references to `bf_cur'
and `bf_modified' to `current_buffer' and `MODIFF'.
1990-10-25 Jim Blandy (jimb@pogo.ai.mit.edu)
- * environ.h: file created - contains declarations for users of the
+ * environ.h: File created - contains declarations for users of the
environment variable list.
- * callproc.c (environ): removed extern declaration of environ, and
+ * callproc.c (environ): Removed extern declaration of environ, and
included environ.h.
1990-10-24 Jim Blandy (jimb@pogo.ai.mit.edu)
- * callproc.c (init_callproc): removed extern declaration of
+ * callproc.c (init_callproc): Removed extern declaration of
environ - it's already taken care of at the top of the file.
- * mocklisp.h: file created - externally declares certain
+ * mocklisp.h: File created - externally declares certain
functions defined in mocklisp.c.
- * lisp.h (Fread_buffer, Fread_key_sequence): added extern
+ * lisp.h (Fread_buffer, Fread_key_sequence): Added extern
declarations for these functions.
- * callint.c (ml_apply, Fread_buffer, Fread_key_sequence): removed
+ * callint.c (ml_apply, Fread_buffer, Fread_key_sequence): Removed
extern declarations for these functions, included mocklisp.h.
Moved external declaration of index to top of file.
1990-10-23 Jim Blandy (jimb@geech.ai.mit.edu)
- * indent.h (last_known_column_point): added extern declaration for
+ * indent.h (last_known_column_point): Added extern declaration for
this variable.
- buffer.c (last_known_column_point): removed extern declaration for
+ * buffer.c (last_known_column_point): Removed extern declaration for
this variable, included indent.h.
- (Vprin1_to_string_buffer): removed extern declaration - it's
+ (Vprin1_to_string_buffer): Removed extern declaration - it's
already in lisp.h.
- * lisp.h (catchlist, backtrace_list, stack_bottom,
- current_global_map): added extern declarations for these
+ * lisp.h (catchlist, backtrace_list, stack_bottom)
+ (current_global_map): Added extern declarations for these
variables.
- * alloc.c: removed external declarations for catchlist,
+ * alloc.c: Removed external declarations for catchlist,
backtrace_list, and stack_bottom, since this file includes
lisp.h.
- * callint.c: (current_global_map): removed extern declaration.
+ * callint.c (current_global_map): Removed extern declaration.
- * search.h: new file - declares searchbuf.
- * dired.c (Fdirectory_files): removed extern declaration of
+ * search.h: New file - declares searchbuf.
+ * dired.c (Fdirectory_files): Removed extern declaration of
searchbuf, included search.h.
* Globally renamed `CHAR_AT_POSITION' to `FETCH_CHAR'.
* keyboard.c (quit_char): New variable.
(init_keyboard): Initialize it.
(Fset_input_mode): New optional arg to set quit_char.
- (command_loop_1, read_char, kbd_buffer_store_char):
+ (command_loop_1, read_char, kbd_buffer_store_char)
(read_avail_input): Use quit_char, not C-g.
* sysdep.c (init_sys_modes): Use quit_char to set special chars.
* xterm.c (x_term_init): Pass new arg to Fset_input_mode.
1990-10-22 Jim Blandy (jimb@pogo.ai.mit.edu)
- * xdisp.c: added `extern' declaration for command_loop_level.
+ * xdisp.c: Added `extern' declaration for command_loop_level.
* term.c (term_init): Internal cleanups.
- (write_glyphs): renamed argument `start' to `string'.
+ (write_glyphs): Renamed argument `start' to `string'.
1990-10-21 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-19 Jim Blandy (jimb@pogo.ai.mit.edu)
- * scroll.c (do_scrolling): allocate queue using alloca instead
+ * scroll.c (do_scrolling): Allocate queue using alloca instead
of variable-sized arrays.
1990-10-19 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-18 Jim Blandy (jimb@pogo.ai.mit.edu)
- * print.c (internal_with_output_to_temp_buffer): install an
+ * print.c (internal_with_output_to_temp_buffer): Install an
unwind_protect to make sure the current buffer is restored.
- * minibuf.c (read_minibuf): call recursive_edit_1 instead of
+ * minibuf.c (read_minibuf): Call recursive_edit_1 instead of
Frecursive_edit, to support the new command_loop_level
arrangement.
* lread.c (openp): Since access returns 0 on success, change that
into a 1 before returning it.
- * lisp.h: deleted DEFSIMPLE and DEFPRED, since they're no
+ * lisp.h: Deleted DEFSIMPLE and DEFPRED, since they're no
longer used.
1990-10-18 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-18 Jim Blandy (jimb@pogo.ai.mit.edu)
- * keymap.c (Flookup_key): rearranged to use an index into the key
+ * keymap.c (Flookup_key): Rearranged to use an index into the key
sequence instead of a pointer and a level counter.
1990-10-18 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-17 Jim Blandy (jimb@pogo.ai.mit.edu)
- * keyboard.c (command_loop): made call to command_loop_2
+ * keyboard.c (command_loop): Made call to command_loop_2
conditional on minibuf_level too (it used to be only conditional
on command_loop_level), since this is what 18.56 and all the other
functions in Emacs 19 keyboard.c do.
1990-10-16 Jim Blandy (jimb@pogo.ai.mit.edu)
- * indent.c (position_indentation): instead of using CharAt, use a
+ * indent.c (position_indentation): Instead of using CharAt, use a
pointer to scan the buffer - this is faster.
* emacs.c (Fdump_emacs): The conditional expression which passes
* buffer.c (list_buffers_1): Select the buffer given in
Vstandard_output using Fset_buffer instead of set_buffer_internal.
- * buffer.c (set_buffer_internal): deleted variable swb - it's
+ * buffer.c (set_buffer_internal): Deleted variable swb - it's
never used.
- * buffer.c (count_modified_buffers): function deleted - it's
+ * buffer.c (count_modified_buffers): Function deleted - it's
not used anymore.
1990-10-11 Jim Blandy (jimb@pogo.ai.mit.edu)
do not have a DEFVAR_PER_BUFFER, as described in the comments
above buffer_local_flags.
- * buffer.c (Fget_buffer_create): move initialization of
+ * buffer.c (Fget_buffer_create): Move initialization of
b->save_length and b->last_window_start to reset_buffer.
1990-10-11 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-10 Jim Blandy (jimb@pogo.ai.mit.edu)
- * alloc.c (gc_sweep): only unchain markers that are in a buffer.
+ * alloc.c (gc_sweep): Only unchain markers that are in a buffer.
1990-10-10 Mike Rowan (mtr@apple-gunkies)
1990-10-09 Jim Blandy (jimb@churchy.ai.mit.edu)
- * xdist.c: (decode_mode_spec): reworked code to handle %* - it now
+ * xdist.c (decode_mode_spec): Reworked code to handle %* - it now
goes like `if return else if return else ... return' instead of
using a conditional operator.
- * xdist.c: (fmodetrunc): function deleted - no longer used.
+ * xdist.c (fmodetrunc): Function deleted - no longer used.
1990-10-09 Richard Stallman (rms@mole.ai.mit.edu)
1990-10-06 Jim Blandy (jimb@pogo.ai.mit.edu)
- * sysdep.c (tabs_safe_p, get_screen_size): renamed `sg' to `tty'.
+ * sysdep.c (tabs_safe_p, get_screen_size): Renamed `sg' to `tty'.
- * sysdep.c (init_baud_rate): rearranged code for calculating
+ * sysdep.c (init_baud_rate): Rearranged code for calculating
baud_rate.
1990-10-05 Jim Blandy (jimb@pogo.ai.mit.edu)
- * search.c (Freplace_match): used Finsert_buffer_substring instead
+ * search.c (Freplace_match): Used Finsert_buffer_substring instead
of place and deleted place.
- * search.c (place): function removed
+ * search.c (place): Function removed.
* process.c (count_active_processes): Deleted; not used.
- * minibuf.c (read_minibuf): renamed `prefix' argument to `initial'.
+ * minibuf.c (read_minibuf): Renamed `prefix' argument to `initial'.
1990-10-01 Jim Blandy (jimb@pogo.ai.mit.edu)
- * lread.c (Fload): renamed `MISSING-OK' to `NOERROR'.
+ * lread.c (Fload): Renamed `MISSING-OK' to `NOERROR'.
- * keyboard.c (describe_map): renamed `keys' to `string'.
+ * keyboard.c (describe_map): Renamed `keys' to `string'.
* keyboard.c `Vauto_save_interval' unrenamed back to
`auto-save-interval'.
- * keymap.c (Fdefine_key, Flookup_key): renamed arguments called
+ * keymap.c (Fdefine_key, Flookup_key): Renamed arguments called
`keys' to `key'.
1990-10-01 Richard Stallman (rms@mole.ai.mit.edu)
* keyboard.c: `auto_save_interval' renamed to
`Vauto_save_interval', since it *is* a lisp-accessible variable.
- * fileio.c (Fdo_auto_save): call record_auto_save so that
+ * fileio.c (Fdo_auto_save): Call record_auto_save so that
read_char knows when we've auto-saved.
- * keyboard.c (record_auto_save): added function to support the new
+ * keyboard.c (record_auto_save): Added function to support the new
auto-save conditions.
- * keyboard.c (read_char): use num_input_chars and last_auto_save
+ * keyboard.c (read_char): Use num_input_chars and last_auto_save
instead of keystrokes to decide when to autosave.
- * keyboard.c (keystrokes): variable deleted.
+ * keyboard.c (keystrokes): Variable deleted.
1990-09-30 Mike Rowan (mtr@spike.ai.mit.edu)
- * keyboard.c, alloc.c: added malloc warning code from
+ * keyboard.c, alloc.c: Added malloc warning code from
18.56.
* dispnew.c, xdisp.c: (un)hold_window_change no longer exists;
* lread.c (Fload): Warn if elc file older than source file.
- * ymakefile (LIB_X11_LIB): New parameter,default -lX11.
+ * ymakefile (LIB_X11_LIB): New parameter, default -lX11.
(LIBX): Use that.
* Makefile (xmakefile): Delete junk.c at the beginning.
1990-09-28 Jim Blandy (jimb@pogo.ai.mit.edu)
- * fileio.c (Fwrite_region): renamed variable `fd' to `desc' and
+ * fileio.c (Fwrite_region): Renamed variable `fd' to `desc' and
changed argument to open from `1' to `O_WRONLY'.
- * fileio.c (O_WRONLY): added clause to define this if not already
+ * fileio.c (O_WRONLY): Added clause to define this if not already
defined.
- * emacs.c (Fdump_emacs): removed a_name variable.
+ * emacs.c (Fdump_emacs): Removed a_name variable.
- * emacs.c (Fkill_emacs): removed code which asked about modified
+ * emacs.c (Fkill_emacs): Removed code which asked about modified
buffers and running subprocesses.
- * editfns.c (Fcurrent_time_string): renamed variable `now' to
+ * editfns.c (Fcurrent_time_string): Renamed variable `now' to
`current_time'.
- * dispnew.c (update_line): renamed variables `m1' and `m2' to
+ * dispnew.c (update_line): Renamed variables `m1' and `m2' to
`begmatch' and `endmatch'.
- * dispnew.c (update_screen): use preempt_count as a limit instead
+ * dispnew.c (update_screen): Use preempt_count as a limit instead
of a counter; count with i instead.
- * dispnew.c (visible_bell, inverse_video, baud_rate,
- Vwindow_system): rearranged comments.
+ * dispnew.c (visible_bell, inverse_video, baud_rate)
+ (Vwindow_system): Rearranged comments.
1990-09-27 Richard Stallman (rms@mole.ai.mit.edu)
* emacs.c (main) : Set the DISPLAY environment value when both of
MAINTAIN_ENVIRONMENT and HAVE_X_WINDOW are defined.
- * m-convex.h (LIB_STANDARD, LIBS_MACHINE): remove these, they
+ * m-convex.h (LIB_STANDARD, LIBS_MACHINE): Remove these, they
cause an unnecessary C1/C2 dependency.
- * m-convex.h (LD_SWITCH_MACHINE): use -e__start to specify
+ * m-convex.h (LD_SWITCH_MACHINE): Use -e__start to specify
where crt0.c begins.
- * m-convex.h (HAVE_SETSID): define; must call setsid
+ * m-convex.h (HAVE_SETSID): Define; must call setsid
when creating an inferior with a different controlling tty.
- * process.c (create_process): rearrange so that HAVE_SETSID
+ * process.c (create_process): Rearrange so that HAVE_SETSID
will be seen when not under USG.
- * m-convex.h (S_IFMT etc): define in case of posix compilation.
+ * m-convex.h (S_IFMT etc): Define in case of posix compilation.
- * m-convex.h (FIRST_PTY_LETTER): do it at runtime.
- * unexconvex.c (first_pty_letter): routine to locate lowest pty.
+ * m-convex.h (FIRST_PTY_LETTER): Do it at runtime.
+ * unexconvex.c (first_pty_letter): Routine to locate lowest pty.
* unexconvex.c: Rewrite so it can cope with thread-local sections.
1990-09-03 Mike Rowan (mtr@apple-gunkies)
- * sysdep.c: added setup_pty from 18.56
+ * sysdep.c: Added setup_pty from 18.56
- * process.c: merged in 18.55->6 changes. Same for process.h
+ * process.c: Merged in 18.55->6 changes. Same for process.h
globally replaced:
- redisplay_preserving_echo_area -> redisplay_preserve_echo_area
- SetBfp -> set_buffer_internal
- buffer_flush_undo -> buffer_disable_undo
- redo_mode_line -> update_mode_line (window.h)
+ redisplay_preserving_echo_area -> redisplay_preserve_echo_area
+ SetBfp -> set_buffer_internal
+ buffer_flush_undo -> buffer_disable_undo
+ redo_mode_line -> update_mode_line (window.h)
1990-08-31 Richard Stallman (rms@mole.ai.mit.edu)
1990-08-19 Joseph Arceneaux (jla@geech)
- * xterm.c (dumplyphs): Last vestige of MScreenWidth removed.
+ * xterm.c (dumpglyphs): Last vestige of MScreenWidth removed.
* config.h: MScreenWidth, MScreenHeight definitions removed.
1990-08-18 Joseph Arceneaux (jla@geech)
free_screen_glyphs now takes screen argument.
* window.c (Fnext_window, Fprevious_window): Fixed typo. New
- behaviour: mini non-nil implies all_screens if global mini screen
+ behavior: mini non-nil implies all_screens if global mini screen
exists, implies current screen only if not.
(Fdisplay_buffer): Simplification of multi-screen code.
* xfns.c (x_y_pos): Nuked. Replaced by pixel_to_char_translation
and notice_mouse_movment (dispnew.c, xterm.c).
(Fx_point_coordinates): Also nuked.
- mouse_buffer_offset: New lisp variable.
+ (mouse_buffer_offset): New lisp variable.
* xterm.c (notice_mouse_movement): Use it in call to
pixel_to_char_translation.
1990-08-12 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * dispnew.c (pixel_to_char_translation): New algorithm for
+ * dispnew.c (pixel_to_char_translation): New algorithm for
finding y.
* xfns.c (install_*_scrollbar): No more height, width parameters.
1990-08-11 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
- * m-convex.h (C_SWITCH_MACHINE, LIB_STANDARD, LIBS_MACHINE):
+ * m-convex.h (C_SWITCH_MACHINE, LIB_STANDARD, LIBS_MACHINE)
(LD_SWITCH_MACHINE): Add definitions for Convex V 4.0.
1990-08-11 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* xfns.c (Fx_grab_pointer): Call XCreateFontCursor on shape,
setting new variable grabbed_cursor. Return Qt if successful,
Qnil otherwise.
- (Fx_ungrab_pointer): free grabbed_cursor if non zero. Return Qnil.
+ (Fx_ungrab_pointer): Free grabbed_cursor if non zero. Return Qnil.
1990-08-10 Joseph Arceneaux (jla@churchy.ai.mit.edu)
1990-08-07 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * dispextern.h: element bufp of screen_glyphs no longer dependent
+ * dispextern.h: Element bufp of screen_glyphs no longer dependent
on X windows.
* xdisp.c (display_text_line): Likewise.
* xfns.c: Vmouse_grabbed renamed Vmouse_depressed.
* xterm.c: Likewise.
- (construct_mouse_event): Don't check mouse coordinates; this is
+ (construct_mouse_event): Don't check mouse coordinates; this is
done by the notice_mouse_motion. Don't grab the mouse here.
* dispnew.c (update_line): Set the pix_width and pix_height of the
leaving screen, as well as setting x_mouse_x = x_mouse_y = -1.
* keyboard.c: Vmouse_window, Vmouse_event declared extern and no
- longer DEFVARed: they are already delclared in window.c
+ longer DEFVARed: they are already declared in window.c.
* screen.c (window_from_coordinates): Use Fnext_window, even if
MULTI_SCREEN, to obtain the next window. This is an test.
1990-08-04 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* screen.c (Fcoordinates_in_window_p): Doc fix. Simplified.
- (window_from_coordinates): New function.
- (Flocate_window_from_coordinates): Use it.
+ (window_from_coordinates): New function.
+ (Flocate_window_from_coordinates): Use it.
- * keyboard.c (classify_object): New function for dealing with the
+ * keyboard.c (classify_object): New function for dealing with the
input object. New symbol, mouse-motion, called here.
Call to mouse-motion-handler now takes no parameters.
- (read_key_sequence): Use the new function. Don't set keybuf[0]
+ (read_key_sequence): Use the new function. Don't set keybuf[0]
to 0.
- * xterm.c (init_input_symbols): Create all the Lisp symbols
+ * xterm.c (init_input_symbols): Create all the Lisp symbols
returned in the input stream.
- func_key_syms: New array to hold all symbols for function keys.
+ (func_key_syms): New array to hold all symbols for function keys.
(x_func_key_to_sym): Use this array.
(notice_mouse_movement): New function for dealing with motion
events.
1990-07-26 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xdisp.c (display_text_line): String to rope copy for inserting
+ * xdisp.c (display_text_line): String to rope copy for inserting
arrow text.
1990-07-25 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* xdisp.c (display_mode_line): Check that the name has actually
changed before calling x_set_name.
- * ralloc.c (check_memory_limits): New function.
+ * ralloc.c (check_memory_limits): New function.
Also check if new memory will be larger than elisp pointer.
(r_alloc_sbrk): Call this function.
(relocate_blocs_upward, relocate_blocs_downward): Eliminated.
* dispnew.c (safe_bcopy): No longer static.
- * ralloc.c (relocate_blocs_upward, relocate_blocs_downward): Use
- safe_bcopy.
+ * ralloc.c (relocate_blocs_upward, relocate_blocs_downward):
+ Use safe_bcopy.
- * mem_limits.c: typedef SIZE.
+ * mem_limits.c: typedef SIZE.
1990-07-19 Joseph Arceneaux (jla@churchy.ai.mit.edu)
1990-07-18 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * indent.c (Fmove_to_column): Set end to ZV.
+ * indent.c (Fmove_to_column): Set end to ZV.
1990-07-17 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-07-17 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * buffer.c (list_buffers_1): Don't check list-buffers-directory.
+ * buffer.c (list_buffers_1): Don't check list-buffers-directory.
1990-07-16 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xdisp.c (display_text_line): Don't print ellipsis if they're
+ * xdisp.c (display_text_line): Don't print ellipsis if they're
off the left edge.
1990-07-10 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-06-15 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * term.c: (cursor_to): Only add chars_wasted if not calling hook.
+ * term.c (cursor_to): Only add chars_wasted if not calling hook.
(clear_end_of_line_raw): Likewise.
(clear_end_of_line): Check that screen is termcap before using
chars_wasted.
SCREEN_WIDTH (selected_screen).
* dispnew.c (init_display): Don't set SCREEN_WIDTH, etc. from
screen_width.
- (change_window_size): No longer check output_type and set
+ (change_window_size): No longer check output_type and set
ScreenRows.
1990-06-11 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-06-06 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * keyboard.c (echo_prompt): Now uses glyphs.
- echobuf, echobuf_ptr: These variables now glyphs.
+ * keyboard.c (echo_prompt): Now uses glyphs.
+ echobuf, echobuf_ptr: These variables now glyphs.
1990-06-05 Joseph Arceneaux (jla@churchy.ai.mit.edu)
omessage.
* alloc.c (Fgarbage_collect): Ditto.
- * xdisp.c (message): message_buf set here, realloced if smaller
+ * xdisp.c (message): message_buf set here, realloced if smaller
than screen width.
message_buf now type GLYF *. New variable message_buf_size holds
its size.
Use temp_buf for call to doprnt, then use str_to_glyph_cpy to set
echo_area_glyphs.
- * print.c (printchar, strout): Use message_buf_size. Convert to
+ * print.c (printchar, strout): Use message_buf_size. Convert to
glyfs before assigning chars.
- (str_to_glyph_cpy, str_to_glyph_ncpy,
- glyph_to_str_cpy, glyph_to_str_ncpy): New functions.
+ (str_to_glyph_cpy, str_to_glyph_ncpy)
+ (glyph_to_str_cpy, glyph_to_str_ncpy): New functions.
1990-06-03 Joseph Arceneaux (jla@churchy.ai.mit.edu)
(ILcost, DLcost, ILncost, DLncost): Now pointers.
(do_scrolling): Use alloca for queue.
- * term.c (term_init): selected_screen as arg to calculate_costs.
+ * term.c (term_init): selected_screen as arg to calculate_costs.
(calculate_costs):
Dynamically allocate chars_wasted, copybuf, DC_ICcost.
Set RPov based on actual width.
1990-06-02 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * term.c (calculate_ins_del_char_costs, string_cost_one_line):
+ * term.c (calculate_ins_del_char_costs, string_cost_one_line):
Made static.
* dispnew.c: Declare scrolling_1;
- * scroll.c (CalcIDCosts, CalcIDCosts1, CalcLID): Renamed
+ * scroll.c (CalcIDCosts, CalcIDCosts1, CalcLID): Renamed
calculate_ins_del_char_costs, ins_del_costs, and line_ins_del.
CalcIDCosts1 and CalcLID also renamed.
- (calculate_scrolling): Now void.
+ (calculate_scrolling): Now void.
- * Global renaming: bf_modified -> MODIFF. CharAt -> CHAR_AT_POSITION.
+ * Global renaming: bf_modified -> MODIFF. CharAt -> CHAR_AT_POSITION.
BufferSafe{Floor,Ceiling} -> BUFFER_{FLOOR,CEILING}_OF.
SetPoint -> SET_PT.
* print.c: Include dispextern.h.
(printchar, strout): Use message_buf.
- * sysdep.c (get_screen_size): Don't use MscreenWidth, MscreenLenght.
- * term.c: Likewise.
+ * sysdep.c (get_screen_size): Don't use MscreenWidth, MscreenLenght.
+ * term.c: Likewise.
- * scroll.c (CalcIDCosts, CalcIDCosts1, CalcLID): These now take a
+ * scroll.c (CalcIDCosts, CalcIDCosts1, CalcLID): These now take a
screen argument.
(CalcIDCosts): Dynamically allocate ILcost, etc.
(ILcost, DLcost, ILncost, DLncost): Now pointers.
Macro SetBfx removed.
Macro SetPoint renamed SET_PT.
- * fileio.c (Fexpand_file_name): Simplified.
+ * fileio.c (Fexpand_file_name): Simplified.
1990-06-01 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-05-31 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * process.c (Fprocess_connection): Return the type of a process
+ * process.c (Fprocess_connection): Return the type of a process
object.
- (syms_of_process): Initialize pty_process and stream_process.
+ (syms_of_process): Initialize pty_process and stream_process.
Declare Fprocess_type.
- * process.h New element type to struct Lisp_Process.
+ * process.h: New element type to struct Lisp_Process.
* syntax.c (scan_sexps_forward): Initialize curlevel->last to -1.
1990-05-28 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * fileio.c (Finsert_file_contents): Use new variable how_much to
+ * fileio.c (Finsert_file_contents): Use new variable how_much to
hold read result.
1990-05-24 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * lread.c (read_char_exclusive): New subr.
+ * lread.c (read_char_exclusive): New subr.
1990-05-24 David Lawrence (tale@pogo.ai.mit.edu)
- * fileio.c (file_executable_p): New function.
+ * fileio.c (file_executable_p): New function.
1990-05-23 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* insdel.c (make_gap): Only set BEG_ADDR if BUFFER_REALLOC was
successful.
- * editfns.c (syms_of_editfns): DEFVAR the new variables.
+ * editfns.c (syms_of_editfns): DEFVAR the new variables.
* eval.c (Finteractive_p): Don't skip the first frame if the
function was compiled.
* Renamed meta_flag meta_key.
- * termopts.h: Comment changes.
+ * termopts.h: Comment changes.
1990-05-20 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* buffer.h: upcase_table and downcase_table are now Lisp_Objects.
- * alloc.c (mark_object, gc_sweep): Related changes.
+ * alloc.c (mark_object, gc_sweep): Related changes.
* casetab.c: Ditto.
1990-05-17 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* indent.c (Fcurrent_column): Likewise.
* minibuf.c (read_minibuf): Likewise.
* regex.c (re_match_2): Use PTR_CHAR_POS.
- * editfns.c (Fbuffer_size, Fnarrow_to_region, Fbuffer_substring):
+ * editfns.c (Fbuffer_size, Fnarrow_to_region, Fbuffer_substring)
(Fbuffer_string, Finsert_buffer_substring): Likewise.
(save_restriction_restore): Likewise.
* dispnew.c (direct_output_for_insert): Likewise.
* xdisp.c (try_window, try_window_id, display_text_line): Likewise.
(redisplay): Likewise.
* buffer.c (list_buffers_1): Likewise.
- * marker.c (marker_position, Fset_marker, set_marker_restricted):
+ * marker.c (marker_position, Fset_marker, set_marker_restricted)
(Fmarker_position): Likewise.
* window.c (unshow_buffer, Fset_window_configuration): Likewise.
(Fset_window_buffer): Likewise.
* buffer.h (struct buffer): Make the syntax table a Lisp object.
* alloc.c (mark_buffer): No need to treat it specially.
- * syntax.c (Fsyntax_table, Fset_syntax_table, Fdescribe_syntax):
+ * syntax.c (Fsyntax_table, Fset_syntax_table, Fdescribe_syntax)
(Fmodify_syntax_entry): Adjust for this change.
* buffer.c (reset_buffer_local_variables): Need not be special.
(init_buffer_once): Make this slot a defaulted local variable.
1990-05-16 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xdisp.c (try_window): No return value.
+ * xdisp.c (try_window): No return value.
Fix calls to try_window.
* Global variable RedoModes is now redraw_mode_line.
1990-05-10 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * dispextern.h: new struct screen_glyfs replaces struct
+ * dispextern.h: New struct screen_glyfs replaces struct
display_line.
- * screen.c: new screen elements current_glyfs, desired_glyfs, and
+ * screen.c: New screen elements current_glyfs, desired_glyfs, and
temp_glyfs.
- * dispnew.c: (make_screen_glyfs, free_screen_glyfs,
- remake_screen_glyfs): New functions.
+ * dispnew.c (make_screen_glyfs, free_screen_glyfs)
+ (remake_screen_glyfs): New functions.
(make_display_lines, new_display_line, return_display_line):
Functions deleted.
(change_screen_size, init_display): Use the new functions.
(line_hash_code, line_draw_cost): Cleaned up.
Args are different, and hash computation too.
(update_screen): Rearrange buffer-emptying code.
- * xdisp.c: (display_minibuf_message, redisplay): Rewritten for new
+ * xdisp.c (display_minibuf_message, redisplay): Rewritten for new
structures.
(display_text_line, display_mode_line): Likewise.
(display_mode_element, display_string): Likewise.
* keyboard.c (echo_prompt, echo_char, echo_dash, echo): New functions.
(cancel_echoing): Likewise.
(immediate_echo, echoptr): New variables.
- (command_loop_1, request_echo, get_char, read_key_sequence):
+ (command_loop_1, request_echo, get_char, read_key_sequence)
(set_waiting_for_input, interrupt_signal): Related changes.
(get_char): No more declaration of request_echo. Local cleanups.
1990-05-08 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * process.c (Fopen_network_stream): Also handle numeric inet
- addresses.
+ * process.c (Fopen_network_stream): Also handle numeric inet addresses.
1990-05-06 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* xterm.c (x_display_cursor): Don't check s->phys_x when drawing
cursor.
- * undo.c: New version.
- * undo.h: No longer exists.
+ * undo.c: New version.
+ * undo.h: No longer exists.
* alloc.c (Fgarbage_collect): Call truncate_undo_list.
(syms_of_alloc): Define vars undo-threshold and undo-high-threshold.
* buffer.c (Fget_buffer_create): Set undo_list to t or nil.
* buffer.h: New element undo_list in struct buffer.
* fileio.c (Finsert_file_contents): Store nil in undo_list.
- * buffer.c: Variable bf_text deleted.
+ * buffer.c: Variable bf_text deleted.
(Fkill_buffer, SetBfp): Delete code that worked with it.
- (SetBfx): Now a macro in buffer.h
+ (SetBfx): Now a macro in buffer.h
* editfns.c (Fwiden, Fnarrow_to_region): Related changes.
(save_restriction_save, save_restriction_restore): Likewise.
(Finsert_buffer_substring): Likewise.
1990-04-30 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * buffer.h: New macro R_ALLOC_SET_BUFFER for declaring all the
+ * buffer.h: New macro R_ALLOC_SET_BUFFER for declaring all the
text pointers of a buffer to the relocating allocator.
* buffer.c (Fbury_buffer, SetBfx, SetBfp): Use the macro.
- * editfns.c (Finsert_buffer_substring): ditto.
- * fileio.c (Fdo_auto_save): ditto.
- * insdel.c (make_gap): ditto.
+ * editfns.c (Finsert_buffer_substring): Ditto.
+ * fileio.c (Fdo_auto_save): Ditto.
+ * insdel.c (make_gap): Ditto.
* xfns.c (adjust_scrollbars): Don't set bf_cur->text.
1990-04-26 Joseph Arceneaux (jla@churchy.ai.mit.edu)
1990-04-19 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_open_connection): Attach xrdb to x_current_display.
+ * xfns.c (Fx_open_connection): Attach xrdb to x_current_display.
1990-04-17 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (dumpborder): Now only used for X10.
- (highlight, unhighlight): New functions for X11.
+ * xterm.c (dumpborder): Now only used for X10.
+ (highlight, unhighlight): New functions for X11.
1990-04-17 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-04-15 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_get_resource): Concatenate invocation_name before
+ * xfns.c (Fx_get_resource): Concatenate invocation_name before
the resource tag.
- (Fx_create_screen): Use the latest resource id's.
+ (Fx_create_screen): Use the latest resource id's.
1990-04-13 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_get_resource): New subr.
- (Fx_open_connection): Call x_load_resources. New parameter
+ * xfns.c (Fx_get_resource): New subr.
+ (Fx_open_connection): Call x_load_resources. New parameter
xrm_string.
- * xrdb.c: New file for doing resource manager stuff.
+ * xrdb.c: New file for doing resource manager stuff.
- * xscrollbar.h: New file for scrollbar bitmaps.
+ * xscrollbar.h: New file for scrollbar bitmaps.
- * xselect.h: New file for the X selection stuff.
+ * xselect.h: New file for the X selection stuff.
* ymakefile: Take note of these new files.
1990-04-10 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (x_term_init): Use MAXPATHLEN.
+ * xterm.c (x_term_init): Use MAXPATHLEN.
1990-04-09 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-04-06 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * screen.c (coordinates_in_window): Return -1 if in modeline of
- window.
- (Fcoordinates_in_window_p): Return Qt if in modeline of window.
- (Flocate_window_from_coordinates): Use next_screen_window if
+ * screen.c (coordinates_in_window): Return -1 if in modeline of window.
+ (Fcoordinates_in_window_p): Return Qt if in modeline of window.
+ (Flocate_window_from_coordinates): Use next_screen_window if
MULTI_WINDOW is defined.
1990-04-05 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (construct_mouse_event): Deal with the motion events
+ * xterm.c (construct_mouse_event): Deal with the motion events
first. Only grab the mouse when in the scrollbar.
1990-04-04 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* screen.c (coordinates_in_window): Include mode line as part of
window.
- * xterm.c (XTread_socket): Initialize nbytes to 0.
- (x_display_cursor): Don't draw if screen not selected.
+ * xterm.c (XTread_socket): Initialize nbytes to 0.
+ (x_display_cursor): Don't draw if screen not selected.
- * xdisp.c (DoDsp): Additional checks for screen being visible.
+ * xdisp.c (DoDsp): Additional checks for screen being visible.
1990-04-03 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * editfns.c (Fmessage): If there is a global minibuffer screen,
+ * editfns.c (Fmessage): If there is a global minibuffer screen,
raise it before displaying the message.
- * window.c (window_loop): Parameter SCREENS now affects which
+ * window.c (window_loop): Parameter SCREENS now affects which
screen is scanned for windows. All subrs calling window_loop must
pass a Lisp_Object here now.
1990-04-01 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * window.c (window_loop): Additional parameter mini to control
+ * window.c (window_loop): Additional parameter mini to control
minibuffer selection or not.
- (Fget_lru_window):
- (Fget_largest_window):
- (Fget_buffer_window):
- (Fdelete_other_windows):
- (Fdelete_windows_on):
- (Freplace_buffer_in_windows): Use that parameter.
+ (Fget_lru_window, Fget_largest_window, Fget_buffer_window)
+ (Fdelete_other_windows, Fdelete_windows_on)
+ (Freplace_buffer_in_windows): Use that parameter.
1990-03-29 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * screen.c (Fselect_screen): Raise the selected screen.
+ * screen.c (Fselect_screen): Raise the selected screen.
- * window.c (Fget_buffer_window):
- (Fget_largest_window):
- (Fget_lru_window): New parameter all_screens.
- (Fdisplay_buffer): Use the new param in Fget_lru_window,
- Fget_buffer_window, and Fget_largest_window.
- (Fscroll_other_window): Use new param in Fget_buffer_window.
- * buffer.c (Fother_buffer): ditto.
+ * window.c (Fget_buffer_window, Fget_largest_window)
+ (Fget_lru_window): New parameter all_screens.
+ (Fdisplay_buffer): Use the new param in Fget_lru_window,
+ Fget_buffer_window, and Fget_largest_window.
+ (Fscroll_other_window): Use new param in Fget_buffer_window.
+ * buffer.c (Fother_buffer): Ditto.
- * xterm.c (x_display_cursor): Always draw the cursor if ON is
+ * xterm.c (x_display_cursor): Always draw the cursor if ON is
true. Don't check if the screen S is selected or equal to
mouse-screen.
- * xfns.c (Fx_track_pointer): Don't turn off cursor, just call
+ * xfns.c (Fx_track_pointer): Don't turn off cursor, just call
x_display_cursor.
1990-03-28 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * data.c (Fmake_local_variable): Give the variable value nil if
+ * data.c (Fmake_local_variable): Give the variable value nil if
unbound.
- * window.c (Fnext_window, Fprevious_window): For MULTI_SCREEN,
+ * window.c (Fnext_window, Fprevious_window): For MULTI_SCREEN,
check if Vglobal_minibuffer_screen is non-nil and maybe call
next_screen.
- * screen.c (Fscreen_selected_window):
- (Fscreen_root_window): If screen is nil, use selected-screen.
+ * screen.c (Fscreen_selected_window, Fscreen_root_window):
+ If screen is nil, use selected-screen.
1990-03-27 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (XTread_socket): SET_SCREEN_GARBAGED which returning
+ * xterm.c (XTread_socket): SET_SCREEN_GARBAGED which returning
symbol which causes DoDsp to be invoked.
- * keyboard.c (read_key_sequence): Don't SET_SCREEN_GARBAGED here.
+ * keyboard.c (read_key_sequence): Don't SET_SCREEN_GARBAGED here.
- * screen.h: New macro SET_SCREEN_GARBAGED.
+ * screen.h: New macro SET_SCREEN_GARBAGED.
* xfns.c:
* window.c:
* sysdep.c:
* keyboard.c:
- * dispnew.c: Use the new macro.
+ * dispnew.c: Use the new macro.
1990-03-25 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_own_selection): Only take one argument, string.
+ * xfns.c (Fx_own_selection): Only take one argument, string.
1990-03-24 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (select_visual): Catch bullshit machines whose hardware
+ * xfns.c (select_visual): Catch bullshit machines whose hardware
doesn't support the X server pixel depth by looking at colormap_size.
- (x_decode_color): Use x_screen_planes to check for color.
+ (x_decode_color): Use x_screen_planes to check for color.
1990-03-23 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (x_display_cursor): Try using vertical bar cursor.
- (clear_cursor): Call x_display_cursor for X11.
+ * xterm.c (x_display_cursor): Try using vertical bar cursor.
+ (clear_cursor): Call x_display_cursor for X11.
* xfns.c: Zotzed Vx_pointer_mask.
- (Fx_track_pointer): Call x_display_cursor if we just
+ (Fx_track_pointer): Call x_display_cursor if we just
wasted the cursor. Break out of loop if no display line.
Use mode line cursor if we're there.
- (x_y_pos): New function.
- (x_set_font): Dont' set x_font_{width,height}, they are gone.
+ (x_y_pos): New function.
+ (x_set_font): Don't set x_font_{width,height}, they are gone.
1990-03-22 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_track_pointer): Check that s == selected_screen each
+ * xfns.c (Fx_track_pointer): Check that s == selected_screen each
time through loop. If event is nil, read mouse position.
- * keyboard.c (get_char): DoDsp only if selected_screen visible.
+ * keyboard.c (get_char): DoDsp only if selected_screen visible.
- * xterm.c (XTread_socket): Mark screen as visible only on expose
+ * xterm.c (XTread_socket): Mark screen as visible only on expose
event.
- * emacs.c (main): Check here for "-d" option and set display_arg.
- * dispnew.c (init_display): Set Vwindow_system, etc. if display_arg.
+ * emacs.c (main): Check here for "-d" option and set display_arg.
+ * dispnew.c (init_display): Set Vwindow_system, etc. if display_arg.
1990-03-21 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * keyboard.c (read_key_sequence): Don't DoDsp if the screen was
+ * keyboard.c (read_key_sequence): Don't DoDsp if the screen was
just unmapped.
- (command_loop_1): Call the mouse motion handler before calling
+ (command_loop_1): Call the mouse motion handler before calling
read_key_sequence.
- (interrupt_signal): Fixed typo checking screen type.
+ (interrupt_signal): Fixed typo checking screen type.
- * xfns.c (Fx_track_mouse): Don't crash because of null display
+ * xfns.c (Fx_track_mouse): Don't crash because of null display
line. Don't set obj til call to get_char.
- * xterm.c (x_term_init): Disable SIGWINCH here.
+ * xterm.c (x_term_init): Disable SIGWINCH here.
- * fns.c (Fmember): New subr.
+ * fns.c (Fmember): New subr.
- * dispnew.c (init_display): Don't check env variable DISPLAY to
+ * dispnew.c (init_display): Don't check env variable DISPLAY to
set Vwindow_system. Now done in startup.el.
- * emacs.c: Removed variables xargc, xargv.
+ * emacs.c: Removed variables xargc, xargv.
1990-03-20 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_track_pointer): Go faster.
+ * xfns.c (Fx_track_pointer): Go faster.
- * screen.h: New macro SCREENP.
+ * screen.h: New macro SCREENP.
- * window.c: (Fminibuffer_window): Rewritten.
+ * window.c (Fminibuffer_window): Rewritten.
1990-03-19 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-03-19 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * keyboard.c (command_loop_1): Restructured handling of X event
+ * keyboard.c (command_loop_1): Restructured handling of X event
things.
- (read_key_sequence): Handle new `unmapped-screen' symbol with new
+ (read_key_sequence): Handle new `unmapped-screen' symbol with new
Vunmap_screen_hook.
- * xterm.c (XTread_socket): Return unmapped-screen symbol if the
+ * xterm.c (XTread_socket): Return unmapped-screen symbol if the
window for UnmapNotify events.
- * lread.c (Feval_region): GCPRO opoint.
+ * lread.c (Feval_region): GCPRO opoint.
1990-03-16 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * keyboard.c (command_loop_1): Call mouse-motion handler with
+ * keyboard.c (command_loop_1): Call mouse-motion handler with
argument. Also, don't call undo-boundary.
- * process.c (create_process): Set the process group for BSD at
+ * process.c (create_process): Set the process group for BSD at
the same time as for USG.
1990-03-14 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (x_new_selected_screen): Set x_input_screen here.
+ * xterm.c (x_new_selected_screen): Set x_input_screen here.
1990-03-11 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c: Vx_mouse_grabbed now Vmouse_grabbed.
- (XTread_socket): Generate exited-window symbols on LeaveNotify
+ * xterm.c: Vx_mouse_grabbed now Vmouse_grabbed.
+ (XTread_socket): Generate exited-window symbols on LeaveNotify
even if screen is focused.
- * xfns.c: Vx_mouse_grabbed now Vmouse_grabbed.
- (outline_region): Now static.
- (Fx_track_pointer): Check x_mouse_screen == s in loop.
+ * xfns.c: Vx_mouse_grabbed now Vmouse_grabbed.
+ (outline_region): Now static.
+ (Fx_track_pointer): Check x_mouse_screen == s in loop.
1990-03-10 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* xterm.c (encode_mouse_button): Correctly get the button from
Motion events.
- * xfns.c (x11_encode_mouse_button): Nuked.
+ * xfns.c (x11_encode_mouse_button): Nuked.
(encode_mouse_button, Fx_mouse_events, Fx_get_mouse_event): #if 0'd.
- * keyboard.c (get_char): Re-set obj if we've keyboard-translated
- c.
+ * keyboard.c (get_char): Re-set obj if we've keyboard-translated c.
1990-03-08 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (x_focus_screen): no longer static.
- (x_error_handler): Use XDefaultIOError.
+ * xterm.c (x_focus_screen): No longer static.
+ (x_error_handler): Use XDefaultIOError.
- * screen.c (Ffocus_screen): New subr, removed Fscreen_has_focus.
- (Fselect_screen): New, optional parameter no_enter.
- (Frestore_screen_configuration):
- (Fdelete_screen): Pass second parm Qnil to Fselect_screen.
+ * screen.c (Ffocus_screen): New subr, removed Fscreen_has_focus.
+ (Fselect_screen): New, optional parameter no_enter.
+ (Frestore_screen_configuration)
+ (Fdelete_screen): Pass second parm Qnil to Fselect_screen.
- * window.c (Fdisplay_buffer, Fset_window_configuration): Pass
+ * window.c (Fdisplay_buffer, Fset_window_configuration): Pass
second parm Qnil to Fselect_screen.
1990-03-07 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * screen.c (Fscreen_has_focus): New subr.
- (Fselect_screen): Use x_focus_on_screen to physically select the
+ * screen.c (Fscreen_has_focus): New subr.
+ (Fselect_screen): Use x_focus_on_screen to physically select the
screen.
1990-03-06 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (x_set_mouse_position): Moved to xterm.c.
+ * xfns.c (x_set_mouse_position): Moved to xterm.c.
- * fileio.c (Fremove_directory): New subr.
+ * fileio.c (Fremove_directory): New subr.
- * screen.c (Frelease_focused_screen): Just call x_unfocus_screen.
+ * screen.c (Frelease_focused_screen): Just call x_unfocus_screen.
- * xterm.c (XTread_socket): On FocusOut, if s isn't mouse screen,
+ * xterm.c (XTread_socket): On FocusOut, if s isn't mouse screen,
return exited-window. On LeaveNotify, simplify if expression for
dumpborder. Reworked FocusIn/FocusOut events.
- (x_unfocus_screen): Check that screen is x_focus_screen.
- (x_set_mouse_position): Moved from xfns.c. Use new macro
+ (x_unfocus_screen): Check that screen is x_focus_screen.
+ (x_set_mouse_position): Moved from xfns.c. Use new macro
XWarpPointer.
- * xterm.h: New macro XWarpPointer.
+ * xterm.h: New macro XWarpPointer.
- * buffer.c: Replaced Fbuffer_flush_undo with
+ * buffer.c: Replaced Fbuffer_flush_undo with
Fbuffer_disable_undo.
- * process.c: Ditto.
+ * process.c: Ditto.
1990-03-05 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.c (XTupdate_end): Use parameter s rather than
+ * xterm.c (XTupdate_end): Use parameter s rather than
updating_screen.
- (XTread_socket): On EnterNotify, don't check s != focus_screen
+ (XTread_socket): On EnterNotify, don't check s != focus_screen
before selecting. On Focus In/Out don't set/reset mouse_screen.
1990-03-04 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* eval.c: If using X windows, include xterm.h.
- (error): TOTALLY_UNBLOCK_INPUT if using X.
+ (error): TOTALLY_UNBLOCK_INPUT if using X.
- * xterm.h: BLOCK_INPUT, UNBLOCK_INPUT: No signal stuff, just inc
+ * xterm.h (BLOCK_INPUT, UNBLOCK_INPUT): No signal stuff, just inc
and decrement x_input_blocked.
- * xfns.c (adjust_scrollbars): Don't BLOCK_INPUT.
- (x_set_font): Check result of x_new_font. Call error if nonzero.
+ * xfns.c (adjust_scrollbars): Don't BLOCK_INPUT.
+ (x_set_font): Check result of x_new_font. Call error if nonzero.
(x_set_icon_type): Check result of x_*_icon, maybe call error.
* screen.c (Fdeiconify_screen): Use x_make_screen_visible rather
than x_deiconify_screen. Return screen.
- (Fmake_screen_visible): Don't raise it here. Return screen.
+ (Fmake_screen_visible): Don't raise it here. Return screen.
- * xterm.c (XTwrite_glyfs): Don't show cursor if screen is
+ * xterm.c (XTwrite_glyfs): Don't show cursor if screen is
global-minibuffer-screen.
(x_new_selected_screen): Do dumpborder and check auto-raise here,
rather than XEvent switch.
(x_deiconify_screen): No longer exists.
- (x_do_pending_expose, x_clear_cursor):
- (x_invert_screen, scraplines, stufflines, x_bitmap_icon):
- (x_text_icon, x_new_font): Don't BLOCK_INPUT.
- (XTins_del_lines): BLOCK_INPUT here.
- (XTupdate_end): Don't turn on cursor if minibuffer-screen.
+ (x_do_pending_expose, x_clear_cursor)
+ (x_invert_screen, scraplines, stufflines, x_bitmap_icon)
+ (x_text_icon, x_new_font): Don't BLOCK_INPUT.
+ (XTins_del_lines): BLOCK_INPUT here.
+ (XTupdate_end): Don't turn on cursor if minibuffer-screen.
(XTread_socket): On MotionNotify, just that screen is selected before
processing.
- (XTtopos): If updating_screen, just set x and y, don't flush.
- (x_bitmap_icon):
- (x_text_icon):
- (x_new_font): Return 1 if failed, don't call error.
- (x_make_screen_visible): Raise the screen as well.
+ (XTtopos): If updating_screen, just set x and y, don't flush.
+ (x_bitmap_icon, x_text_icon, x_new_font): Return 1 if failed,
+ don't call error.
+ (x_make_screen_visible): Raise the screen as well.
1990-03-02 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * screen.c (Frelease_focused_screen): Just check that screen is
+ * screen.c (Frelease_focused_screen): Just check that screen is
selected.
1990-02-28 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * screen.c (Fselect_screen_focused, Frelease_focused_screen): New
+ * screen.c (Fselect_screen_focused, Frelease_focused_screen): New
subrs.
- * xterm.c (x_focus_on_screen, x_unfocus_screen): New procedures
+ * xterm.c (x_focus_on_screen, x_unfocus_screen): New procedures
to implement focusing.
1990-02-28 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1990-02-28 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xterm.h: Redefined BLOCK_INPUT and UNBLOCK_INPUT to use sigblock
+ * xterm.h: Redefined BLOCK_INPUT and UNBLOCK_INPUT to use sigblock
and sigsetmask if available.
- * xterm.c: Declare BLOCK_INPUT_mask if have SIGIO and FIONREAD.
+ * xterm.c: Declare BLOCK_INPUT_mask if have SIGIO and FIONREAD.
1990-02-27 Joseph Arceneaux (jla@churchy.ai.mit.edu)
* keyboard.c (read_key_sequence): Handle mapped-screen event
symbol by calling new hook Vmap_screen_hook.
- * xterm.c (x_make_screen_invisible): Use the new Xlib function
+ * xterm.c (x_make_screen_invisible): Use the new Xlib function
XWidthdrawWindow.
- (x_iconify_screen): Use the new Xlib function XIconifyWindow.
+ (x_iconify_screen): Use the new Xlib function XIconifyWindow.
(XTread_socket): Return mapped-screen symbol to signal
mapped-screen events.
1990-02-23 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * keyboard.c (command_loop_1): Check the character for width 1
+ * keyboard.c (command_loop_1): Check the character for width 1
before doing direct_output_forward, as well as the cursor position
on the screen.
- * xdisp.c (DoDsp): Use redisplay_windows rather than
+ * xdisp.c (DoDsp): Use redisplay_windows rather than
redisplay_all_windows, which was removed.
1990-02-22 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
converting selection (note new variable x_converting_selection),
just set new variable x_selection_alloc_error.
- * xfns.c: Massive changes for crufty selection processing details.
- New X atoms: Xatom_clipboard, Xatom_delete, Xatom_insert_selection,
+ * xfns.c: Massive changes for crufty selection processing details.
+ New X atoms: Xatom_clipboard, Xatom_delete, Xatom_insert_selection,
Xatom_insert_property, Xatom_pair.
1990-02-21 Joseph Arceneaux (jla@churchy.ai.mit.edu)
1990-02-20 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * keyboard.c (kbd_buffer_get_char): Use KBD_BUFFER_SIZE rather
+ * keyboard.c (kbd_buffer_get_char): Use KBD_BUFFER_SIZE rather
than sizeof kbd_buffer.
(read_key_sequence): Upon redraw-display symbol, set
screen_garbaged.
1990-02-14 Joseph Arceneaux (jla@albert.ai.mit.edu)
- * keyboard.c (read_avail_input): pass read_socket_hook
+ * keyboard.c (read_avail_input): Pass read_socket_hook
KBD_BUFFER_SIZE rather than doing sizeof (buf).
* xterm.c (XTread_socket): Set event.type = MotionNotify when
1990-02-13 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * window.c (next_screen, prev_screen): moved to screen.c
+ * window.c (next_screen, prev_screen): Moved to screen.c.
(Fnext_window): If mini non-nil, count the separate minibuffer
screen.
- * screen.c (Fnext_screen): new subr.
+ * screen.c (Fnext_screen): New subr.
1990-02-12 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
Also, just use nil and t for x-mouse-grabbed. Record buttons
pressed in new variable x_mouse_grabbed. XGrabPointer on button
depression.
- * xfns.c (Fx_horizontal_line): use x_mouse_grabbed.
+ * xfns.c (Fx_horizontal_line): Use x_mouse_grabbed.
1990-02-07 Joseph Arceneaux (jla@churchy.ai.mit.edu)
1990-01-28 Joseph Arceneaux (jla@churchy.ai.mit.edu)
- * xfns.c (Fx_track_pointer): rewrote this to loop while there are
+ * xfns.c (Fx_track_pointer): Rewrote this to loop while there are
mouse events.
* xterm.c (XTread_socket): Return left-window-event symbol upon
* xterm.c (XTread_socket): Return a motion event when mouse enters
scrollbar or window.
(x_make_screen_invisible): Use the new X11R4 function XWithdrawWindow.
- (x_iconify_screen): Use the X11R4 function XIconfifyWindow.
+ (x_iconify_screen): Use the X11R4 function XIconifyWindow.
(dumpglyfs): Use the new face structure.
* xfns.c (install_vertical_scrollbar, install_horizontal_scrollbar):
* keyboard.c (read_key_sequence): Function keys are now lisp symbols.
(kbd_buffer_store_char): Abort if store pointer past
- buffer. Temproarry; This shouldn't be able to happen.
- (read_key_sequence): #ifdef HAVE_X_WINDOWS code
+ buffer. Temporary; this shouldn't be able to happen.
+ (read_key_sequence): #ifdef HAVE_X_WINDOWS code
which handles complex objects.
(command_loop_1): Check not termcap screen before
processing non-char input.
(XTflash): Just dumpglyfs instead of redrawing the
screen after flashing the rectangle.
- * lread.c: (syms_of_lread): defsubr Fread_event.
+ * lread.c (syms_of_lread): defsubr Fread_event.
1990-01-04 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-12-14 Joseph Arceneaux (jla@spiff)
* xfns.c: New variable Vx_no_window_manager.
- (Fx_track_pointer): If bufp < 0, abort.
+ (Fx_track_pointer): If bufp < 0, abort.
- * xterm.c (XTread_socket): When leaving window, set x_mouse_x and
+ * xterm.c (XTread_socket): When leaving window, set x_mouse_x and
x_mouse_y to -1.
1989-12-13 Joseph Arceneaux (jla@spiff)
1989-12-08 Joseph Arceneaux (jla@spiff)
- * process.c (create_process): For not USG, properly set the
+ * process.c (create_process): For not USG, properly set the
process group.
1989-12-07 Joseph Arceneaux (jla@spiff)
- * term.c (topos): Under X Windows, abort if topos_hook not
+ * term.c (topos): Under X Windows, abort if topos_hook not
correct. Temporary.
* xfns.c (Fx_horizontal_line): New subr.
1989-12-04 Joseph Arceneaux (jla@spiff)
* screen.c (coordinates_in_window): New function.
- (Fcoordinates_in_window_p): Rewritten to use above.
+ (Fcoordinates_in_window_p): Rewritten to use above.
* dispextern.h: New element bufp for display_line structure when
using X windows.
* alloc.c: Upped NSTATICS from 200 to 256.
- * xterm.c (XTread_socket): Report MotionNotify events only if
+ * xterm.c (XTread_socket): Report MotionNotify events only if
mouse has changed character position. Call x_read_mouse_position.
Set Vmouse_event here.
* xfns.c (x_read_mouse_position): Set new global variables
x_mouse_x and x_mouse_y.
- * keyboard.c: Vignore_mouse_events: New variable.
+ * keyboard.c: Vignore_mouse_events: New variable.
* syntax.c (Fscan_sexps): Doc change.
* xfns.c (Fx_track_pointer): Draw half-sized rectangles for '\n'.
(x_rectangle): Draw half-size if negative argument.
- * xterm.c (XTread_socket): abort if garbage collecting when doing
+ * xterm.c (XTread_socket): Abort if garbage collecting when doing
mouse events.
* ymakefile: #define FLOATSUP if LISP_FLOAT_TYPE defined.
1989-11-29 Joseph Arceneaux (jla@spiff)
- * lread.c (Fread_char): Return a Lisp_Object (directly from
+ * lread.c (Fread_char): Return a Lisp_Object (directly from
get_char).
* keyboard.c:
* config.h-dist (C_SWITCH_SITE, LD_SWITCH_SITE): Mention these.
(HAVE_X11): Renamed from X11 and defined by default.
- It shoukld have no effect when not using X.
+ It should have no effect when not using X.
1989-11-14 Joseph Arceneaux (jla@spiff)
- * xfns.c (Fx_get_selection, x_selection_arrival): use &event
+ * xfns.c (Fx_get_selection, x_selection_arrival): Use &event
instead of event.
(x_selection_arrival): For incremental selections, loop on
XGetWindowProperty if one is not enough.
1989-11-08 Joseph Arceneaux (jla@spiff)
- * search.c (Fmatch_data): fixed typo.
+ * search.c (Fmatch_data): Fixed typo.
* insdel.c (make_gap): Use BUFFER_REALLOC instead of realloc.
* buffer.c (Fget_buffer_create): Use new define BUFFER_ALLOC in
* lread.c: Moved function read_escape.
* unexec.c: Declarations for make_hdr, copy_text_and_data,
copy_sym. Declare mark_x as static void.
- * dispextern.h: removed declaration of new_display_line.
+ * dispextern.h: Removed declaration of new_display_line.
* emacs.c: Do malloc_init if GNU_MALLOC.
- * gmalloc.c: (malloc_init): New function.
+ * gmalloc.c (malloc_init): New function.
- * xfns.c (x_rectangle, Fx_draw_rectangle, Fx_erase_rectangle,
- outline_region, Fx_countour_region, Fx_uncontour_region): New
+ * xfns.c (x_rectangle, Fx_draw_rectangle, Fx_erase_rectangle)
+ (outline_region, Fx_countour_region, Fx_uncontour_region): New
subroutines for drawing rectangles and things.
(Fx_point_coordinates): New subr.
1989-10-31 Joseph Arceneaux (jla@spiff)
- * All .c and .h files: New copyright header.
+ * All .c and .h files: New copyright header.
1989-10-30 Joseph Arceneaux (jla@spiff)
* xfns.c (Fx_own_selection): Use second parameter SCREEN.
- * xdisp.c: (message, message1): No longer displays messages
+ * xdisp.c (message, message1): No longer displays messages
when using X but not yet mapped.
1989-10-18 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-10-13 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c (x_selection_arrival):
- (x_send_incremental):
+ * xfns.c (x_selection_arrival, x_send_incremental)
(x_answer_selection_request): New procedures for incremental
selection transfer.
1989-10-12 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
* lread.c (complete_filename_p): New function which replaces
- absolute_filename_p. This one doesn't consider "~" valid.
+ absolute_filename_p. This one doesn't consider "~" valid.
1989-10-12 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-10-11 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c: (Fx_open_connection) New X atoms Xatom_incremental and
+ * xfns.c (Fx_open_connection) New X atoms Xatom_incremental and
Xatom_multiple.
* xterm.h: New macros MAX_SELECTION and SELECTION_LENGTH.
- * process.c (child_sig): Check pid <= 0 in case WNOHANG not defined.
+ * process.c (child_sig): Check pid <= 0 in case WNOHANG not defined.
1989-10-11 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* xfns.c (Fx_open_connection): Make all X Atoms here.
- * xterm.c: (x_iconify_screen):
- (x_iconify_screen): Cleaned up this code.
+ * xterm.c (x_iconify_screen): Cleaned up this code.
(x_term_init): Removed warpmouseondeiconify stuff.
1989-10-09 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
MapNotify event.
* xterm.c: No longer sets the variable mouse_down_timestamp.
- * xfns.c: (Fx_get_mouse_event) mouse_timestamp
- (formerly mouse_down_timestamp) set here. Also, mask out upper 9
- bits before doing XSET.
+ * xfns.c (Fx_get_mouse_event): mouse_timestamp (formerly
+ mouse_down_timestamp) set here. Also, mask out upper 9
+ bits before doing XSET.
1989-09-28 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
* xfns.c (Fx_geometry): Kludge for the case of position `-0'.
(Fx_get_mouse_event): Also return the time stamp as last list elt.
- (Fx_color_display_p):
- (Fx_defined_color):
- (x_decode_color):
+ (Fx_color_display_p, Fx_defined_color, x_decode_color)
(defined_color): Eliminate screen argument.
(Fx_create_screen): No more ColorMap component to display.x.
* xterm.h: Likewise.
1989-09-27 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c (Fx_own_selection):
- (Fx_get_selection):
- (x_disown_selection): new funcs, which use new variables
- Vx_selection_value, x_begin_selection_own, mouse_down_timestamp,
- requestor_time, requestor_window, property_name, and
- x_begin_selection_own.
+ * xfns.c (Fx_own_selection, Fx_get_selection, x_disown_selection):
+ New funcs, which use new variables Vx_selection_value,
+ x_begin_selection_own, mouse_down_timestamp, requestor_time,
+ requestor_window, property_name, and x_begin_selection_own.
* xterm.c (XTread_socket): Only do stuff if s for FocusOut under X11.
SelectionClear:
SelectionRequest:
- SelectionNotify: New events to handle the selection inter-client
+ SelectionNotify: New events to handle the selection inter-client
communication mechanism.
ButtonPress: Set mouse_down_timestamp.
1989-09-11 Joseph Arceneaux (jla@spiff)
- * fileio.c (Fwrite_region): fixed typo.
+ * fileio.c (Fwrite_region): Fixed typo.
- * keyboard.c (Fdiscard_input): fixed typo.
+ * keyboard.c (Fdiscard_input): Fixed typo.
- * window.c (Fnext_window): fixed typos.
+ * window.c (Fnext_window): Fixed typos.
* alloc.c (xmalloc, xrealloc): hold_window_changes whilst doing
the associated operations.
- * dispnew.c (init_display):
- (Fsleep_for, Fsit_for):
+ * dispnew.c (init_display, Fsleep_for, Fsit_for):
* process.c (Faccept_process_output):
- * keyboard.c ({clear,set}_waiting_for_input):
+ * keyboard.c ({clear,set}_waiting_for_input)
(quit_throw_to_get_char, get_char):
* xdisp.c (DoDsp, message, message1): Undid changes of Aug. 23
- (see below); accept window changes most of the time.
+ (see below); accept window changes most of the time.
1989-09-07 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
(x_set_mouse_color): Rewrote this function. Always set cursor and
its color. If the window exists, then attach the cursor to it.
No longer uses x_reset_cursor.
- (x_create_window):
- (x_set_background):
- (x_set_foreground): Use x_set_mouse_color instead of x_reset_cursor.
+ (x_create_window, x_set_background, x_set_foreground):
+ Use x_set_mouse_color instead of x_reset_cursor.
1989-08-18 Richard Stallman (rms@hobbes.ai.mit.edu)
* keymap.c: New subrs Fuse_local_mouse_map, Fcurrent_local_mouse_map.
- * xfns.c (x_set_mouse_color):
- (x_set_cur): No need to redraw display after doing these.
+ * xfns.c (x_set_mouse_color, x_set_cur): No need to redraw display
+ after doing these.
(Fx_get_mouse_event): Accept motion events.
(x11_encode_mouse_button): Encoding a la X11, except for one
kludge. This is used only for motion events.
- * xterm.c (XTread_socket): Handle motion eveots.
+ * xterm.c (XTread_socket): Handle motion events.
1989-07-26 Joseph Arceneaux (jla@spiff)
* xfns.c (Fx_create_screen): I couldn't take it any more, the
ugliness of this routine offended me too deeply. It is now
completely rewritten for X11 and uses subroutines:
- (x_figure_window_size)
- (x_create_window)
- (x_icon)
- (x_make_gc)
-
- (Fx_draw_rectangle):
- (Fx_erase_rectangle): New subrs.
+ (x_figure_window_size, x_create_window, x_icon, x_make_gc)
+ (Fx_draw_rectangle, Fx_erase_rectangle): New subrs.
* m/m-intel386.h: Changes in LOAD_AVE_TYPE, LOAD_AVE_CVT, and
FSCALE to make loadst work correctly.
before looping through alist.
(Fx_create_screen): Call x_default_parameter for font.
- Don't add the scrollbar widths when making the main window: this
+ Don't add the scrollbar widths when making the main window: this
is done when the scrollbar is actually made.
(x_set_vertical_scrollbar): Set v_scrollbar_width here instead of
(x_set_horizontal_scrollbar): Likewise.
- * xterm.c: (x_set_window_size): Don't call the things called
+ * xterm.c (x_set_window_size): Don't call the things called
anyway upon the ConfigureNotify event.
(x_set_offset): Use the screen-size lisp variables for these
calculations.
* sysdep.c: Don't include sioctl.h on mips.
- * buffer.c (Flist_buffers): Pass prefix as arg.
+ * buffer.c (Flist_buffers): Pass prefix as arg.
* editfns.c (Finsert_char): Insert at most 256 chars at a whack.
1989-07-11 Joseph Arceneaux (jla@gluteus)
- * xterm.c (x_term_init, XTread_socket): Use ConnectionNumber for
+ * xterm.c (x_term_init, XTread_socket): Use ConnectionNumber for
both X10 and X11. This is #defined for X10.
* screen.c (Fset_screen_width, Fset_screen_height): These now take
* eval.c (Ffuncall): Handle 6 arguments. Also, print a nice error
message if there are more than 6 args.
- * fns.c: (Fyes-or-no-p):
- * minibuf.c: (read_minibuf_unwind):
- (Fread_minibuffer):
- (Fread_no_blanks_input):
- (Fcompleting_read): Extra arg to read_minibuf.
+ * fns.c (Fyes-or-no-p):
+ * minibuf.c (read_minibuf_unwind, Fread_minibuffer)
+ (Fread_no_blanks_input, Fcompleting_read): Extra arg to read_minibuf.
* callint.c (Fcall_interactively):
* keyboard.c (Fexecute_extended_command):
- * minibuf.c: (Fread_command):
- (Fread_function):
- (Fread_variable):
+ * minibuf.c (Fread_command, Fread_function, Fread_variable)
(Fread_buffer): Extra arg to Fcompleting_read.
1989-07-05 Joseph Arceneaux (jla@spiff)
* minibuf.c (read_minibuf): New argument back_n is number of
characters to back-up point by.
(Fcompleting_read): Same.
- * fileio.c: (Fnew_read_file_name): New version of Fread_file_name
+ * fileio.c (Fnew_read_file_name): New version of Fread_file_name
using the above features.
(Finsert_file_contents): Check for negative file length.
1989-07-03 Joseph Arceneaux (jla@spiff)
- * xfns.c: (x_pixel_width, x_pixel_height) New functions.
- * screen.c: (Fscreen_pixel_size): New subr.
+ * xfns.c (x_pixel_width, x_pixel_height) New functions.
+ * screen.c (Fscreen_pixel_size): New subr.
1989-06-30 Joseph Arceneaux (jla@spiff)
1989-06-27 Joseph Arceneaux (jla@sugar-bombs.ai.mit.edu)
- * screen.c: (Fselect_screen)
- * window.c: (Fselect_window) The previous strategy was bugging the
+ * screen.c (Fselect_screen):
+ * window.c (Fselect_window): The previous strategy was bugging the
lisp stuff, so these are now rewritten.
1989-06-26 Joseph Arceneaux (jla@galapas.ai.mit.edu)
* cm.c (Wcm_init): Don't check for Wcm.cm_ds, since this has been
removed.
- (losecursor): This function now a #define in cm.h.
+ (losecursor): This function now a #define in cm.h.
* xterm.c (x_iconify_screen): Send message to root window to do
this, as per latest Inter-Client Communications Conventions. This
(x_deiconify_screen): For X11, just Map the window, as per the new
ICCC.
(x_make_screen_visible): Only handle visible and iconified screen
- elements for X10; these variables are handled in event processing
+ elements for X10; these variables are handled in event processing
for X11.
(x_make_screen_invisible): Send an UnmapNotify event to the root
- window to aprise the window manager of the change.
+ window to apprise the window manager of the change.
(XTread_socket): Catch VisibilityNotify events.
1989-06-25 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* xfns.c, lisp/term/x-win.el: C routine Fscreen_color_p now lisp
function x-color-screen-p in x-win.el.
- (x_set_cursor_color): New method: first disallow same cursor as
+ (x_set_cursor_color): New method: first disallow same cursor as
background, then if cursor not foreground, use it as cursor
foreground.
1989-06-09 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * window.c: initialize auto_new_screen to 0 (nil).
+ * window.c: Initialize auto_new_screen to 0 (nil).
- * screen.c (make_screen): added auto_lower to the list of screen
+ * screen.c (make_screen): Added auto_lower to the list of screen
elements initialized.
- (make_minibuffer_screen): likewise.
+ (make_minibuffer_screen): Likewise.
1989-06-08 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-06-08 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c (Fx_open_connection): Added 9 Lisp variables
- defined by the screen and server.
+ * xfns.c (Fx_open_connection): Added 9 Lisp variables
+ defined by the screen and server.
1989-06-08 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-06-08 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c: removed superfluous definition of gray_bits.
+ * xfns.c: Removed superfluous definition of gray_bits.
1989-06-07 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-06-05 Joseph Arceneaux (jla@cream-of-wheat.ai.mit.edu)
- * xterm.c (x_set_window_size): If not already in DoDsp (checked
+ * xterm.c (x_set_window_size): If not already in DoDsp (checked
with variable in_display) then DoDsp here. Handles redisplay
after screen configuration.
(x_error_handler): Print out stuff about the error if we're in
debug mode.
- * dispnew.c (change_screen_size): No longer call DoDsp here.
+ * dispnew.c (change_screen_size): No longer call DoDsp here.
1989-06-05 Chris Hanson (cph@kleph)
1989-05-29 Joseph Arceneaux (jla@gracilis.ai.mit.edu)
- * xfns.c: (Fx_create_screen): If parms is nil and
+ * xfns.c (Fx_create_screen): If parms is nil and
Vx_screen_defaults isn't, then use them.
(Fdisplay_buffer): Call Fx_create_screen with Qnil.
the right thing.
(Frestore_screen_configuration): Don't set the mouse position.
- * window.c (Fselect_window): If window's screen is not selected,
+ * window.c (Fselect_window): If window's screen is not selected,
call Fselecte_screen.
(Fdisplay_buffer): Call Fx_create_screen with x-screen-parameters
as argument instead of nil.
1989-05-19 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xterm.c (x_new_selected_screen): This now takes a struct screen
- pointer as paramter.
- * (XTread_socket): call x_new_selected_screen *before* dumpborder.
+ * xterm.c (x_new_selected_screen): This now takes a struct screen
+ pointer as parameter.
+ (XTread_socket): Call x_new_selected_screen *before* dumpborder.
1989-05-16 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c: (x_window_to_scrollbar): If the caller's not interested
+ * xfns.c (x_window_to_scrollbar): If the caller's not interested
in the names--passing 0 for last two parameters--just return the
screen pointer.
- * xterm.c (x_enter_screen): Added this function for warping the
+ * xterm.c (x_enter_screen): Added this function for warping the
pointer into a screen.
1989-05-16 Chris Hanson (cph@kleph)
1989-05-16 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xterm.c: (x_new_selected_screen): Don't call Fselect_screen.
+ * xterm.c (x_new_selected_screen): Don't call Fselect_screen.
Just do everything here.
* window.c (Fselect_window): If the screen associated with the
which then causes the proper screen to become selected. This does
*not* call Fselect_screen.
- * screen.c (Fselect_screen): Now this is *only* a lisp subr. It
+ * screen.c (Fselect_screen): Now this is *only* a lisp subr. It
just calls Fselect_window on the selected window of the screen.
1989-05-15 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
macro in:
* xterm.h: New macro XChangeWindowSize for both X10 and X11.
- * xfns.c (Fx_create_screen): Use XCreateWindow instead of
+ * xfns.c (Fx_create_screen): Use XCreateWindow instead of
XCreateSimpleWindow to directly set some extra attributes.
1989-05-14 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-05-12 Joseph Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * xfns.c (Fx_create_screen): If user has specified
+ * xfns.c (Fx_create_screen): If user has specified
`x-iconic-startup' then start emacs in iconic form.
Look for icon position in `icon-left' and `icon-top', or use
window postion.
- * xterm.c (x_term_init): If server doesn't respond, use fatal
+ * xterm.c (x_term_init): If server doesn't respond, use fatal
instead of error. Also tell user about -d option.
1989-05-10 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-05-10 Joseph Arceneaux (jla@corn-chex.ai.mit.edu)
- * xfns.c (adjust_scrollbars): Don't subtract 2 from
+ * xfns.c (adjust_scrollbars): Don't subtract 2 from
h_scrollbar_height when calculating `length'.
1989-05-08 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* xterm.c (XTread_socket_hook): For X11, on map and unmap events
check the window manager hints for iconification status.
- * xterm.c (x_make_widow_icon): For X11, just request
+ * xterm.c (x_make_widow_icon): For X11, just request
iconification of the window manager.
1989-05-08 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-05-07 Joseph Arceneaux (jla@corn-chex.ai.mit.edu)
- * xfns.c (adjust_scrollbars): Don't subtract 2 from
+ * xfns.c (adjust_scrollbars): Don't subtract 2 from
v_scrollbar_width when calculating `height'.
- * xfns.c (x_set_foreground, x_set_border_pixel): Finished color
+ * xfns.c (x_set_foreground, x_set_border_pixel): Finished color
coordination. Scrollbar border, thump-arrows, and slider pixmap
- linked with foreground color; slider border with window border.
+ linked with foreground color; slider border with window border.
1989-05-07 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-05-05 Joseph Arceneaux (jla@gracilis.ai.mit.edu)
- * xfns.c (Fx_set_face): Rewrote the doc-string and renamed the
+ * xfns.c (Fx_set_face): Rewrote the doc-string and renamed the
parameters.
1989-05-05 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1989-05-03 Joe Arceneaux (jla@gracilis.ai.mit.edu)
- * xterm.c (x_draw_box): Use the cursor_gc.
- * xfns.c: (x_set_cursor_color, x_create_screen): Do a better job
+ * xterm.c (x_draw_box): Use the cursor_gc.
+ * xfns.c (x_set_cursor_color, x_create_screen): Do a better job
with cursor colors, and use 0 line width for the cursor_gc.
1989-05-02 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
Handle fcns of type Lisp_Compiled.
(Fcommandp, Fapply): Avoid directly nested ifs.
* print.c (print): Handle Lisp_Compiled objects.
- * callint.c (Fcall_interactively): likewise.
- * doc.c (Fdocumentation): likewise.
+ * callint.c (Fcall_interactively): Likewise.
+ * doc.c (Fdocumentation): Likewise.
* keyboard.c (Fopen_dribble_file): nil as arg means close it.
Delete gray_bits; this value made global.
Don't call install_*_scrollbar here.
(x_set_horizontal_scrollbar): Define this for real.
- (x_set_vertical_scrollbar): Corrent args to install_vertical_scrollbar.
+ (x_set_vertical_scrollbar): Correct args to install_vertical_scrollbar.
(install_vertical_scrollbar): New local slider_pixmap, and set it.
Delete locals GC_values, temp_gc.
Change arrow_width, arrow_height (appears to be undefined) to 16.
1989-04-20 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
- * window.c: rename Vauto_new_screen_hook, Vdisplay_buffer_hook, and
+ * window.c: Rename Vauto_new_screen_hook, Vdisplay_buffer_hook, and
Vtemp_buffer_show_hook to ..._function.
- * keyboard.c: rename mouse_hook to mouse_event_function.
+ * keyboard.c: Rename mouse_hook to mouse_event_function.
* buffer.c, buffer.h, cmds.c: blink-paren-hook and auto-fill-hook
renamed to -function.
1989-04-12 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
- * window.c (Fdelete_other_windows): recenter window to avoid scrolling.
+ * window.c (Fdelete_other_windows): Recenter window to avoid scrolling.
1989-04-11 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* fns.c (Fload_average): nlist data structure is funny on convex.
- * window.c (scroll_command): scroll at least 1 line in specd direction.
+ * window.c (scroll_command): Scroll at least 1 line in specd direction.
* cm.c (calccost): NTABS was off by 1 sometimes; take account of
the starting position modulo 8.
* fileio.c (Fexpand_file_name): Don't simplify /../ at start of name.
- * callint.c: doc fixes.
+ * callint.c: Doc fixes.
* process.c (create_process):
On all USG systems, not just IRIS and AIX, don't pre-open pty's tty.
1989-04-01 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
- * process.c (Fopen_network_stream): close desc. if connect fails.
+ * process.c (Fopen_network_stream): Close desc. if connect fails.
1989-03-31 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
(dumpglyfs) [X11]: Changed args to XDrawImageString.
If debugging, do XFlushQueue.
Use screen's face_gc rather than old global one.
- (XTflash) [not BSD]: avoid `struct itimerval'; use `alarm'.
+ (XTflash) [not BSD]: Avoid `struct itimerval'; use `alarm'.
(events): New table of event type names.
(XTread_socket): EVENT is now an XEvent even on x10.
Translate modifier key 1 into meta-bit.
(x_display_cursor): dumpglyfs args changed.
(x_draw_box): Add GC arg to XDrawRectangle; change other args.
(clear_cursor): Change args to XClearArea.
- (dumpborder): check x_input_screen, not selected_screen.
+ (dumpborder): Check x_input_screen, not selected_screen.
(x_text_icon): For X11, new arg to XGetDefault.
Cast values stored in icon_label.
(x_term_init): Hair to calculate name for icon.
(x_reset_cursor): Don't call XRecolorCursor.
(x_set_window_size): Call x_wm_set_size_hint, not x_set_size_hint.
(x_set_resize_hint): For X11, call x_wm_set_size_hint.
- (x_wm_set_size_hint, x_wm_set_window_state, x_wm_set_icon_pixmap):
+ (x_wm_set_size_hint, x_wm_set_window_state, x_wm_set_icon_pixmap)
(x_wm_set_icon_position): New fns for X11.
- * xfns.c: For X11, include Xutil.h
+ * xfns.c: For X11, include Xutil.h.
(VSCROLL_WIDTH): Moved to xterm.h.
(face_GC): Don't declare it.
(id_name): Declare this.
This may avoid the X loop-on-logout bug.
* process.c (wait_reading_process_input): Flush fix_screen_hook.
- * termhooks.h, term.c: likewise.
+ * termhooks.h, term.c: Likewise.
* xdisp.c (Fredraw_display): Don't do set_terminal_modes.
- * dispnew.c (Fredraw_screen): likewise.
+ * dispnew.c (Fredraw_screen): Likewise.
* eval.c (Fcond): If no args, return nil.
Arg EXPECTED is passed to read_socket_hook.
(input_available_signal): Use read_avail_input.
(gobble_input): Use read_avail_input; arg EXPECTED passed along.
- (get_input_pending): let gobble_input do the work.
+ (get_input_pending): Let gobble_input do the work.
VMS keyboard input should have interrupt_input nonzero.
* keyboard.c (Fset_input_mode, init_keyboard): [VMS] Always set
(num_input_keys): New Lisp variable.
* m/m-gould.h, m/m-ibmrt-aix.h, m/m-sequent.h, m/m-sparc.h,
- m/m-sun3.h, m/m-symmetry.h: Define A_TEXT_SEEK.
+ * m/m-sun3.h, m/m-symmetry.h: Define A_TEXT_SEEK.
* unexec.c (copy_text_and_data): Don't check A_TEXT_OFFSET,
just A_TEXT_SEEK.
* unexconvex.c: Likewise.
1989-01-11 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
- * dispnew.c (init_display): don't handle SIGWINCH if using X.
+ * dispnew.c (init_display): Don't handle SIGWINCH if using X.
* fileio.c (Fdo_auto_save): If file has shrunk, turn off auto-save.
This avoids duplicate messages and allows M-x auto-save to turn it on.
* indent.c (Fmove_to_column): 2nd arg t means indent till spec'd column
or change tab to spaces if necessary.
- * m/m-iris4d.h: (conditionally) delete DEFAULT_ENTRY_ADDRESS
+ * m/m-iris4d.h: (Conditionally) delete DEFAULT_ENTRY_ADDRESS
and change START_FILES and LIB_STANDARD.
* s/s-iris3-6.h: Define sigblock as no-op.
* lread.c (read_escape): Support ANSI C `\x...' hex escapes.
- * bytecode.c (Fbyte_code): fix jump operators for change in `pc'.
+ * bytecode.c (Fbyte_code): Fix jump operators for change in `pc'.
1988-12-21 Joe Arceneaux (jla@gracilis.ai.mit.edu)
1988-12-16 Joe Arceneaux (jla@apple-gunkies.ai.mit.edu)
- * sink.h,sinkmask.h: Same file now works for both X10 and X11.
- * xterm.c,xfns.c (x_text_icon) Can now take new name as parameter.
+ * sink.h, sinkmask.h: Same file now works for both X10 and X11.
+ * xterm.c, xfns.c (x_text_icon) Can now take new name as parameter.
1988-12-16 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
1988-12-14 Joe Arceneaux (jla@apple-gunkies.ai.mit.edu)
* xfns.c: Made the first cut for X11 version.
- * xterm.c: (x_reset_cursor) Did the X11 version.
+ * xterm.c (x_reset_cursor): Did the X11 version.
1988-12-14 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* keymap.c (apropos1): Clean up.
Do where-is-internal only if there is a function definition.
Use mouse-describe-key to turn mouse key sequences into strings.
- (Fwhere_is): Check the mouse map too;
+ (Fwhere_is): Check the mouse map too.
(Fwhere_is_internal): New arg is global map to use.
All callers changed in keypad.c and doc.c.
(where_is_string): New fn cvts result of Fwhere_is_internal to string.
* ymakefile (THIS_IS_YMAKEFILE): Define macro to tell m- files
to do special things.
- * m/m-ns16000.h: (LOAD_AVE_TYPE, etc.): Don't define them if USG.
+ * m/m-ns16000.h (LOAD_AVE_TYPE, etc.): Don't define them if USG.
* m/m-ns16000.h [USG]: Define various macros differently.
(munnari!sibyl.eleceng.ua.oz.au!ian@uunet.uu.net).
1988-09-30 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* editfns.c (Fformat): Allow nulls in the format.
- * doprnt.c (doprnt): likewise. End of format string is new arg.
+ * doprnt.c (doprnt): Likewise. End of format string is new arg.
1988-09-28 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
* process.c (child_sig): If synch process terminates, clear
synch_process_pid and record synch_process_death.
- * callproc.c (Fcall_process): return synch_process_death.
+ * callproc.c (Fcall_process): Return synch_process_death.
Always set synch_process_pid and do it with SIGCHLD masked off.
* sysdep.c (wait_for_termination) [subprocesses and not VMS]:
Use alarms to check every second whether synch_process_pid is 0.
See ChangeLog.2 for earlier changes.
- Copyright (C) 1993 Free Software Foundation, Inc.
- Copying and distribution of this file, with or without modification,
- are permitted provided the copyright notice and this notice are preserved.
+;; Local Variables:
+;; coding: utf-8
+;; End:
+
+ Copyright (C) 1993, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ Free Software Foundation, Inc.
+
+ This file is part of GNU Emacs.
+
+ GNU Emacs is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ GNU Emacs is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
;;; arch-tag: 136a8e5c-4f83-403b-9132-874f1c47f8a9
HCoop / bpt / emacs.git / blobdiff