\input texinfo @c -*-texinfo-*-
@c
-@c $Id$
+@c $Id: speedbar.texi,v 1.9 2001/09/12 20:58:22 rms Exp $
@c
@c This file is part of GNU Emacs
@c your option) any later version.
@c GNU Emacs is distributed in the hope that it will be useful, but
-@c WITHOUT ANY WARRANTY; without even the implied warraonty of
+@c WITHOUT ANY WARRANTY; without even the implied warranty of
@c MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
@c General Public License for more details.
@c You should have received a copy of the GNU General Public License
-@c along with Eshell; see the file COPYING. If not, write to the Free
+@c along with Emacs; see the file COPYING. If not, write to the Free
@c Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
@setfilename ../info/speedbar
@settitle Speedbar: File/Tag summarizing utility
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* Speedbar: (speedbar). File/Tag summarizing utility.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
+@dircategory Emacs
+@direntry
+* Speedbar: (speedbar). File/Tag summarizing utility.
+@end direntry
+@ifnottex
+Copyright @copyright{} 1999, 2000 Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being ``The GNU Manifesto'', ``Distribution'' and
+``GNU GENERAL PUBLIC LICENSE'', with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end ifnottex
@titlepage
@sp 10
-@center @titlefont{speedbar}
+@center @titlefont{Speedbar}
+@sp 2
+@center Eric Ludlam
@vskip 0pt plus 1 fill
-Copyright @copyright{} 1999, 2000 Eric M. Ludlam
+@page
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1999, 2000 Free Software Foundation, Inc.
+@sp 1
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being ``The GNU Manifesto'', ``Distribution'' and
+``GNU GENERAL PUBLIC LICENSE'', with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
+@syncodeindex fn cp
+
@node Top, , , (dir)Top
@comment node-name, next, previous, up
-Copyright @copyright{} 1999 Eric M. Ludlam
-
Speedbar is a program for Emacs which can be used to summarize
information related to the current buffer. Its original inspiration
-is the "explorer" often used in modern development environments, office
+is the `explorer' often used in modern development environments, office
packages, and web browsers.
Speedbar displays a narrow frame in which a tree view is shown. This
tree view defaults to containing a list of files and directories. Files
-can be "expanded" to list tags inside. Directories can be expanded to
+can be `expanded' to list tags inside. Directories can be expanded to
list the files within itself. Each file or tag can be jumped to
immediately.
-Speedbar expands upon "explorer" windows by maintaining context with the
+Speedbar expands upon `explorer' windows by maintaining context with the
user. For example, when using the file view, the current buffer's file
is highlighted. Speedbar also mimics the explorer windows by providing
multiple display modes. These modes come in two flavors. Major display
modes remain consistent across buffers, and minor display modes appear
-only when a buffer of the applicable type is shown. This provides
+only when a buffer of the applicable type is shown. This allows
authors of other packages to provide speedbar summaries customized to
the needs of that mode.
-Throughout this manual, activities are defined as "clicking on", or
-"expanding" items. Clicking means using using @kbd{mouse-2} on a
+Throughout this manual, activities are defined as `clicking on', or
+`expanding' items. Clicking means using using @kbd{Mouse-2} on a
button. Expanding refers to clicking on an expansion button to display
-an expanded summary of the entry the exapansion button is
-on. @xref{Basic Navigation}.
+an expanded summary of the entry the expansion button is
+on. @xref{Basic Navigation}.
@menu
* Introduction:: Basics of speedbar.
* Basic Navigation:: Basics of speedbar common between all modes.
-* File Mode:: Summerizing files.
-* Buffer Mode:: Summerizing buffers.
+* File Mode:: Summarizing files.
+* Buffer Mode:: Summarizing buffers.
* Minor Modes:: Additional minor modes such as Info and RMAIL.
-* Customizing:: Changing speedbar behaviors.
+* Customizing:: Changing speedbar behavior.
* Extending:: Extend speedbar for your own project.
* Index::
@end menu
To start using speedbar use the command @kbd{M-x speedbar RET} or select
it from the Tools menu in versions of Emacs with speedbar installed by
default. This command will open a new frame to summarize the local
-files. On X windows, or under Windows NT, speedbar's frame is twenty
+files. On X Window systems or on MS-Windows, speedbar's frame is twenty
characters wide, and will mimic the height of the frame from which it
was started. It positions itself to the left or right of the frame you
started it from.
-To use speedbar effectivly, it is important to understand its
+To use speedbar effectively, it is important to understand its
relationship with the frame you started it from. This frame is the
-"attached frame" which speedbar will use as a reference point. Once
-started speedbar will watch the contents of this frame, and attempts to
-make it's contents relevant to the buffer loaded into the attached
+@dfn{attached frame} which speedbar will use as a reference point. Once
+started, speedbar watches the contents of this frame, and attempts to
+make its contents relevant to the buffer loaded into the attached
frame. In addition, all requests made in speedbar that require the
display of another buffer will display in the attached frame.
When used in terminal mode, the new frame appears the same size as the
terminal. Since it is not visible while working in the attached frame,
-speedbar will save time by using "slowbar" mode, where no tracking is
-done until speedbar is requested to show itself.
+speedbar will save time by using the @dfn{slowbar mode}, where no tracking is
+done until speedbar is requested to show itself (i.e., the speedbar's
+frame becomes the selected frame).
+@cindex @code{speedbar-get-focus}
The function to use when switching between frames using the keyboard is
@code{speedbar-get-focus}. This function will toggle between frames, and
-useful to bind to a key in terminal mode @xref{Customizing}.
+it's useful to bind it to a key in terminal mode. @xref{Customizing}.
@node Basic Navigation, File Mode, Introduction, Top
@comment node-name, next, previous, up
to use.
@menu
-* Basic Keybindings::
+* Basic Key Bindings::
* Basic Visuals::
* Mouse Bindings::
* Displays Submenu::
@end menu
-@node Basic Keybindings, Basic Visuals, Basic Navigation, Basic Navigation
+@node Basic Key Bindings, Basic Visuals, Basic Navigation, Basic Navigation
@comment node-name, next, previous, up
-@section Basic Keybindings
-@cindex keybindings
+@section Basic Key Bindings
+@cindex key bindings
+
+These key bindings are common across all modes:
-These keybindings are common across all modes:
@table @kbd
@item delete, SPC
-@cindex scrolling
+@cindex scrolling in speedbar
Scroll up and down one page.
@item Q
-@cindex quitting
+@cindex quitting speedbar
Quit speedbar, and kill the frame.
@item q
Quit speedbar, and hide the frame. This makes it faster to restore the
-speedbar frame.
+speedbar frame, than if you press @kbd{Q}.
@item g
-@cindex refresh
+@cindex refresh speedbar display
Refresh whatever contents are in speedbar.
@item t
-@cindex slowbar
+@cindex slowbar mode
Toggle speedbar to and from slowbar mode. In slowbar mode, frame
tracking is not done.
-@item n, p
+@item n
+@itemx p
@cindex navigation
-Move to the next or previous item. A summary of that item will be
-displayed in the attached frame's minibuffer.
-@item M-n, M-p
+Move, respectively, to the next or previous item. A summary of that
+item will be displayed in the attached frame's minibuffer.
+@item M-n
+@itemx M-p
Move to the next or previous item in a restricted fashion. If a list is
open, the cursor will skip over it. If the cursor is in an open list,
it will not leave it.
-@item C-M-n, C-M-n
+@item C-M-n
+@itemx C-M-n
Move forwards and backwards across extended groups. This lets you
-quickly skip over all files, or directories, or other common sub-item at
+quickly skip over all files, directories, or other common sub-items at
the same current depth.
@item C-x b
Switch buffers in the attached frame.
@cindex mode switching hotkeys
@table @kbd
@item b
-Switch into Quick Buffers mode @xref{Buffer Mode}. After one use, the
+Switch into Quick Buffers mode (@pxref{Buffer Mode}). After one use, the
previous display mode is restored.
@item f
-Switch into Files mode.
+Switch into File mode.
@item r
Switch back to the previous mode.
@end table
Some modes provide groups, lists and tags. @xref{Basic Visuals}. When
-these are available some additional common bindings are available.
+these are available, some additional common bindings are available.
@cindex common keys
@table @kbd
-@item RET, e
+@item RET
+@itemx e
Edit/Open the current group or tag. This behavior is dependent on the
mode. In general, files or buffers are opened in the attached frame,
and directories or group nodes are expanded locally.
-@item +,=
+@item +
+@itemx =
Expand the current group, displaying sub items.
When used with a prefix argument, any data that may have been cached is
-flushed. This is similar to a power click. @xref{Mouse Bindings}.
+flushed. This is similar to a power click. @xref{Mouse Bindings}.
@item -
Contract the current group, hiding sub items.
@end table
-@node Basic Visuals, Mouse Bindings, Basic Keybindings, Basic Navigation
+@node Basic Visuals, Mouse Bindings, Basic Key Bindings, Basic Navigation
@comment node-name, next, previous, up
@section Basic Visuals
@cindex visuals
Speedbar has visual cues for indicating different types of data. These
cues are used consistently across the different speedbar modes to make
-them easier to understand.
+them easier to interpret.
-At a high level, in Files mode, there are directory buttons, sub
+At a high level, in File mode, there are directory buttons, sub
directory buttons, file buttons, tag buttons, and expansion buttons.
This makes it easy to use the mouse to navigate a directory tree, and
quickly view files, or a summary of those files.
-The most basic visual effect used to distinguis between these button
+The most basic visual effect used to distinguish between these button
types is color and mouse highlighting. Anything the mouse highlights
-can be clicked on and is called a button @xref{Mouse Bindings}.
+can be clicked on and is called a button (@pxref{Mouse Bindings}).
Anything not highlighted by the mouse will not be clickable.
Text in speedbar consists of four different types of data. Knowing how
view of more complex systems, like a directory tree, or manual chapters.
Groups appear at different indentation levels, and are prefixed with a
-@code{+} in some sort of "box". The group name will summarize the
+@samp{+} in some sort of `box'. The group name will summarize the
information within it, and the expansion box will display that
-information inline. In files mode, directories and files are "groups"
-where the @code{+} is surrounded by brackets like this:
+information inline. In File mode, directories and files are `groups'
+where the @samp{+} is surrounded by brackets like this:
@example
<+> include
a file. The directories have a box consisting of angle brackets, and a
file uses square brackets.
-In all modes, a group can be "edited" by pressing @kbd{RET}, meaning a
+In all modes, a group can be `edited' by pressing @kbd{RET}, meaning a
file will be opened, or a directory explicitly opened in speedbar. A
group can be expanded or contracted using @kbd{+} or
-@kbd{-}. @xref{Basic Keybindings}.
+@kbd{-}. @xref{Basic Key Bindings}.
-Sometimes groups may have a @code{?} in it's indicator box. This means
+Sometimes groups may have a @samp{?} in its indicator box. This means
that it is a group type, but there are no contents, or no known way of
extracting contents of that group.
When a group has been expanded, the indicator button changes from
-@code{+} to @code{-}. This indicates that the contents are being shown.
-Click the @code{-} button to contract the group, or hide the contents
+@samp{+} to @samp{-}. This indicates that the contents are being shown.
+Click the @samp{-} button to contract the group, or hide the contents
currently displayed.
@subsubsection Tags
@cindex tags
Tags are the leaf nodes of the tree system. Tags are generally prefixed
-with a simple character, such as @code{>}. Tags can only be jumped to using
+with a simple character, such as @samp{>}. Tags can only be jumped to using
@kbd{RET} or @kbd{e}.
@subsubsection Boolean Flags
Sometimes a group or tag is given a boolean flag. These flags appear as
-extra text characters at the end of the line. Files mode uses boolean
-flags, such as a @code{*} to indicate that a file has been checked out
+extra text characters at the end of the line. File mode uses boolean
+flags, such as a @samp{*} to indicate that a file has been checked out
of a versioning system.
-For additional flags,
+For additional flags, see
@c Note to self, update these to sub-nodes which are more relevant.
-@xref{File Mode}, @xref{Version Control}.
+@ref{File Mode}, and @ref{Version Control}.
@subsubsection Unadorned Text
Unadorned text generally starts in column 0, without any special symbols
-prefixing them. In buffers mode different buffer groups are prefixed
+prefixing them. In Buffers mode different buffer groups are prefixed
with a description of what the following buffers are (Files, scratch
buffers, and invisible buffers.)
-Unadorned text will generally be colorless, and not be clickable.
+Unadorned text will generally be colorless, and not clickable.
@subsubsection Color Cues
Each type of Group, item indicator, and label is given a different
-color. The colors chosen are dependent on a light or dark background.
-Of important note is that the "current item", which may be a buffer or
+color. The colors chosen are dependent on whether the background color
+is light or dark.
+Of important note is that the `current item', which may be a buffer or
file name, is highlighted red, and underlined.
Colors can be customized from the group @code{speedbar-faces}. Some
The mouse has become a common information navigation tool. Speedbar
will use the mouse to navigate file systems, buffer lists, and other
data. The different textual cues provide buttons which can be clicked
-on @xref{Basic Visuals}. Anything that highlights can be clicked on
-with the mouse, or effected by the menu.
+on (@pxref{Basic Visuals}). Anything that highlights can be clicked on
+with the mouse, or affected by the menu.
The mouse bindings are:
+
@table @kbd
-@item mouse-1
-Move cursor to that location
-@item mouse-2, double-mouse-1
-Activate the current button. @kbd{double-mouse-1} is called a "double
-click" on other platforms, and is useful for windows users with two
+@item Mouse-1
+Move cursor to that location.
+@item Mouse-2
+@itemx Double-Mouse-1
+Activate the current button. @kbd{Double-Mouse-1} is called a @dfn{double
+click} on other platforms, and is useful for windows users with two
button mice.
-@item SHIFT-mouse-2, SHIFT-double-mouse-1
+@c Isn't it true that with two-button mice, the right button is Mouse-2?
+@c On GNU/Linux, the right button is Mouse-3.
+@item S-Mouse-2
+@itemx S-Double-Mouse-1
@cindex power click
-This has the same effect as @kbd{mouse-2}, except it is called a power
-click. This means that if a group with an expansion button @code{+} is
+This has the same effect as @kbd{Mouse-2}, except it is called a power
+click. This means that if a group with an expansion button @samp{+} is
clicked, any caches are flushed, and subitems re-read. If it is a name,
it will be opened in a new frame.
-@item mouse-3
-Activate the speedbar menu. The item selected effects the line clicked,
+@item Mouse-3
+Activate the speedbar menu. The item selected affects the line clicked,
not the line where the cursor was.
-@item mode-line mouse-1
-Activate the menu. This effects the item the cursor is on before the
+@item Mouse-1 @r{(mode line)}
+Activate the menu. This affects the item the cursor is on before the
click, since the mouse was not clicked on anything.
-@item C-mouse-1
+@item C-Mouse-1
Buffers sub-menu. The buffer in the attached frame is switched.
@end table
@cindex displays submenu
You can display different data by using different display modes. These
-specialized modes make it easier to navigate the relevent pieces of
+specialized modes make it easier to navigate the relevant pieces of
information, such as files and directories, or buffers.
-In the main menu, found by clicking @kbd{mouse-3}, there is a submenu
-labeled "Displays". This submenu lets you easily choose between
+In the main menu, found by clicking @kbd{Mouse-3}, there is a submenu
+labeled @samp{Displays}. This submenu lets you easily choose between
different display modes.
The contents are modes currently loaded into emacs. By default, this
can even see if a file is checked out of a version control system, or
has some associated object file.
-Advanced behaviors, like copying and renaming files is also provided.
+Advanced behavior, like copying and renaming files, is also provided.
@menu
* Directory Display:: What the display means.
* Hidden Files:: How to display hidden files.
-* File Keybindings:: Performing file operations.
+* File Key Bindings:: Performing file operations.
@end menu
@node Directory Display, Hidden Files, File Mode, File Mode
wish to jump to.
Next, directories are listed. A directory starts with the group
-indicator button @code{<+>}. Clicking the directory name makes speedbar
+indicator button @samp{<+>}. Clicking the directory name makes speedbar
load that directory as the root directory for its display. Clicking the
-@code{<+>} button will list all directories and files beneath.
+@samp{<+>} button will list all directories and files beneath.
-Next, files are listed. Files start with the group indicator @code{[+]}
-or @code{[?]}. You can jump to a file in the attached frame by clicking
-on the file name. You can expand a file and look at it's tags by
-clicking on the @code{[+]} symbol near the file name.
+Next, files are listed. Files start with the group indicator @samp{[+]}
+or @samp{[?]}. You can jump to a file in the attached frame by clicking
+on the file name. You can expand a file and look at its tags by
+clicking on the @samp{[+]} symbol near the file name.
A typical session might look like this:
+
@example
~/lisp/
<+> checkdoc
In this example, you can see several directories. The directory
@file{speedbar} has been opened inline. Inside the directory
-@file{speedbar}, the file @file{speedbar.el} has it's tags exposed.
+@file{speedbar}, the file @file{speedbar.el} has its tags exposed.
These tags are extensive, and they are summarized into tag groups.
Files get additional boolean flags associated with them. Valid flags are:
+
@cindex file flags
@table @code
@item *
This file has been checked out of a version control
-system. @xref{Version Control}.
+system. @xref{Version Control}.
+@cindex @code{speedbar-obj-alist}
@item #
This file has an up to date object file associated with it. The
variable @code{speedbar-obj-alist} defines how speedbar determines this
A Tag group is prefixed with the symbol @samp{@{+@}}. Clicking this
symbol will show all symbols that have been organized into that group.
Different types of files have unique tagging methods as defined by their
-major mode. Tags are generated with either the @file{imenu} package, or
-through an @file{etags} interface.
+major mode. Tags are generated with either the @code{imenu} package, or
+through the @code{etags} interface.
Tag groups are defined in multiple ways which make it easier to find the
tag you are looking for. Imenu keywords explicitly create groups, and
few characters of the given symbols are specified in the group name.
Some group names may say something like @samp{speedbar-t to speedbar-v},
indicating that all symbols which alphabetically fall between those
-catagories are included in that sub-group. @xref{Tag Hierarchy Methods}.
+categories are included in that sub-group. @xref{Tag Hierarchy Methods}.
-@node Hidden Files, File Keybindings, Directory Display, File Mode
+@node Hidden Files, File Key Bindings, Directory Display, File Mode
@comment node-name, next, previous, up
@section Hidden Files
@cindex hidden files
-On unix, a hidden file is a file whose name starts with a period. They
-are hidden from a regular directory listing because the user is not
-generally interested in them.
+On GNU and Unix systems, a hidden file is a file whose name starts
+with a period. They are hidden from a regular directory listing
+because the user is not generally interested in them.
In speedbar, a hidden file is a file which isn't very interesting and
might prove distracting to the user. Any uninteresting files are
-removed from the File display. There are two levels of interest in
+removed from the File display. There are two levels of uninterest in
speedbar. The first level of uninterest are files which have no
expansion method, or way of extracting tags. The second level is any
file that matches the same pattern used for completion in
@code{completion-ignored-extensions}.
You can toggle the display of uninteresting files from the toggle menu
-item "Show All Files". This will display all level one hidden files.
-These files will be shown with a @code{?} indicator. Level 2 hidden
+item @samp{Show All Files}. This will display all level one hidden files.
+These files will be shown with a @samp{?} indicator. Level 2 hidden
files will still not be shown.
-Object files fall into the catagory of level 2 hidden files. You can
-determine their presense by the @code{#} and @code{!} file indicators
+Object files fall into the category of level 2 hidden files. You can
+determine their presence by the @samp{#} and @samp{!} file indicators.
@xref{Directory Display}.
-@node File Keybindings, , Hidden Files, File Mode
+@node File Key Bindings, , Hidden Files, File Mode
@comment node-name, next, previous, up
-@section File Keybindings
-@cindex file keybindings
+@section File Key Bindings
+@cindex file key bindings
-Files mode has keybindings permitting different file system operations
-such as copy or rename. These commands all operate on "the current
-file." In this case, the current file is the file at point, or clicked
+File mode has key bindings permitting different file system operations
+such as copy or rename. These commands all operate on the @dfn{current
+file}. In this case, the current file is the file at point, or clicked
on when pulling up the menu.
@table @kbd
@item B
Byte compile the Emacs Lisp file on this line.
@item L
-Load the Emacs Lisp file on this line. If an elc file exists, optionally load
-that.
+Load the Emacs Lisp file on this line. If a @file{.elc} file exists,
+optionally load that.
@item C
Copy the current file to some other location.
@item R
One menu item toggles the display of all available files. By default,
only files which Emacs understands, and knows how to convert into a tag
-list. By showing all files, additional files such as text files are
+list, are shown. By showing all files, additional files such as text files are
also displayed, but they are prefixed with the @samp{[?]} symbol. This
-means that it is a file, but that Emacs doesn't know how to expand it.
+means that it is a file, but Emacs doesn't know how to expand it.
@node Buffer Mode, Minor Modes, File Mode, Top
@comment node-name, next, previous, up
@chapter Buffer Mode
@cindex buffer mode
-Buffer mode is very similar to file mode, except that instead of
+Buffer mode is very similar to File mode, except that instead of
tracking the current directory and all files available there, the
-current list of buffers already loaded into Emacs is shown.
+current list of Emacs buffers is shown.
-These buffers can have their tags expanded in the same way as files
-and uses the same unknown file indicator @xref{File Mode}.
+These buffers can have their tags expanded in the same way as files,
+and uses the same unknown file indicator (@pxref{File Mode}).
+
+Buffer mode does not have file operation bindings, but the following
+buffer specific key bindings are available:
-Buffers mode does not have file operation bindings, but the following
-buffer specific keybindings are available:
@table @kbd
@item k
-Kill this buffer. Do not touch it's file.
+Kill this buffer. Do not touch its file.
@item r
Revert this buffer, reloading from disk.
@end table
-In addition to buffers mode, there is also Quick Buffers mode. In fact,
+In addition to Buffer mode, there is also Quick Buffer mode. In fact,
Quick Buffers is bound to the @kbd{b} key. The only difference between
-Buffers and Quick Buffers is that after one operation is is performed
-which effects the attached frame, the display is immediately reverted to
+Buffers and Quick Buffers is that after one operation is performed
+which affects the attached frame, the display is immediately reverted to
the last displayed mode.
-Thus, if you are in Files mode, and you need quick access to a buffer,
+Thus, if you are in File mode, and you need quick access to a buffer,
press @kbd{b}, click on the buffer you want, and speedbar will revert
-back to Files mode.
+back to File mode.
@node Minor Modes, Customizing, Buffer Mode, Top
@comment node-name, next, previous, up
will override any major display mode currently being displayed for the
duration of the specialized buffer's use. Minor display modes
will follow the general rules of their major counterparts in terms of
-keybindings and visuals, but will have specialized behaviors.
+key bindings and visuals, but will have specialized behaviors.
@menu
* RMAIL:: Managing folders in speedbar
The second section lists all RMAIL folders in the same directory as your
main RMAIL folder. The general rule is that RMAIL folders always appear
in all caps, or numbers. It is possible to save mail in folders with
-lower case letters, but there is no clean way detecting RMAIL folders
+lower case letters, but there is no clean way of detecting such RMAIL folders
without opening them all.
Each folder can be visited by clicking the name. You can move mail from
the current RMAIL folder into a different folder by clicking the
-@samp{<M>} button. The M stands for Move.
+@samp{<M>} button. The @samp{M} stands for Move.
In this way you can manage your existing RMAIL folders fairly easily
using the mouse.
@cindex gdb
@cindex gud
-If you are debugging an application with GDB in emacs, speedbar can show
+If you are debugging an application with GDB in Emacs, speedbar can show
you the current stack when the current buffer is the @file{*gdb*}
buffer. Usually, it will just report that there is no stack, but when
the application is stopped, the current stack will be shown.
Speedbar is highly customizable, with a plethora of control elements.
Since speedbar is so visual and reduces so much information, this is an
-important aspect of it's behavior.
+important aspect of its behavior.
In general, there are three custom groups you can use to quickly modify
speedbar's behavior.
@cindex frame parameters
There are several faces speedbar generates to provide a consistent
-colorscheme across display types. You can customize these faces using
+color scheme across display types. You can customize these faces using
your favorite method. They are:
@table @asis
+@cindex @code{speedbar-button-face}
@item speedbar-button-face
-Faced used on expand/contract buttons.
+Face used on expand/contract buttons.
+@cindex @code{speedbar-file-face}
@item speedbar-file-face
Face used on Files. Should also be used on non-directory like nodes.
+@cindex @code{speedbar-directory-face}
@item speedbar-directory-face
Face used for directories, or nodes which consist of groups of other nodes.
+@cindex @code{speedbar-tag-face}
@item speedbar-tag-face
-Face used for tags in a file, or leaf items.
+Face used for tags in a file, or for leaf items.
+@cindex @code{speedbar-selected-face}
@item speedbar-selected-face
-Face used to highlight the "selected" item. This would be the current
+Face used to highlight the selected item. This would be the current
file being edited.
+@cindex @code{speedbar-highlight-face}
@item speedbar-highlight-face
Face used when the mouse passes over a button.
@end table
You can also customize speedbar's initial frame parameters. How this is
accomplished is dependent on your platform being Emacs or XEmacs.
+@cindex @code{speedbar-frame-parameters}, Emacs
In Emacs, change the alist @code{speedbar-frame-parameters}. This
variable is used to set up initial details. Height is also
automatically added when speedbar is created, though you can override
it.
+@cindex @code{speedbar-frame-plist}, XEmacs
In XEmacs, change the plist @code{speedbar-frame-plist}. This is the
XEmacs way of doing the same thing.
will group some classes of items automatically. Even here, however,
some tag groups can be quite large.
+@cindex @code{speedbar-tag-hierarchy-method}
To solve this problem, tags can be grouped into logical units through a
hierarchy processor. The specific variable to use is
@code{speedbar-tag-hierarchy-method}. There are several methods that
-can be applied in any order. they are:
+can be applied in any order. They are:
@table @code
+@cindex @code{speedbar-trim-words-tag-hierarchy}
@item speedbar-trim-words-tag-hierarchy
Find a common prefix for all elements of a group, and trim it off.
+@cindex @code{speedbar-prefix-group-tag-hierarchy}
@item speedbar-prefix-group-tag-hierarchy
If a group is too large, place sets of tags into bins based on common
prefixes.
+@cindex @code{speedbar-simple-group-tag-hierarchy}
@item speedbar-simple-group-tag-hierarchy
Take all items in the top level list not in a group, and stick them into
-a `Tags' group.
+a @samp{Tags} group.
+@cindex @code{speedbar-sort-tag-hierarchy}
@item speedbar-sort-tag-hierarchy
Sort all items, leaving groups on top.
@end table
Some other control variables are:
@table @code
+@cindex @code{speedbar-tag-group-name-minimum-length}
@item speedbar-tag-group-name-minimum-length
-Default Value: 4.
+Default value: 4.
The minimum length of a prefix group name before expanding. Thus, if
the @code{speedbar-tag-hierarchy-method} includes
This way we won't get silly looking listings.
+@cindex @code{speedbar-tag-split-minimum-length}
@item speedbar-tag-split-minimum-length
-Default value: 20
+Default value: 20.
Minimum length before we stop trying to create sub-lists in tags.
This is used by all tag-hierarchy methods that break large lists into
sub-lists.
+@cindex @code{speedbar-tag-regroup-maximum-length}
@item speedbar-tag-regroup-maximum-length
-Default value: 10
+Default value: 10.
Maximum length of submenus that are regrouped.
If the regrouping option is used, then if two or more short subgroups
are next to each other, then they are combined until this number of
items is reached.
-
@end table
@node Version Control, Hooks, Tag Hierarchy Methods, Customizing
@cindex version control
@cindex vc extensions
-When using the Files mode in speedbar, information regarding a version
+When using the file mode in speedbar, information regarding a version
control system adds small details to the display. If a file is in a
-version control system, and is "checked out", or "locked" locally, an
-asterisk @asis{*} is placed at the end of the file name. In addition,
+version control system, and is ``checked out'' or ``locked'' locally, an
+asterisk @samp{*} appears at the end of the file name. In addition,
the directory name for Version Control systems are left out of the
speedbar display.
+@cindex @code{speedbar-directory-unshown-regexp}
You can easily add new version control systems into speedbar's detection
-scheme. To make a directory "disappear" from the list, use the variable
+scheme. To make a directory ``disappear'' from the list, use the variable
@code{speedbar-directory-unshown-regexp}.
+@cindex @code{speedbar-vc-path-enable-hook}
Next, you need to write entries for two hooks. The first is
@code{speedbar-vc-path-enable-hook} which will enable a VC check in the
current directory for the group of files being checked. Your hook
function should take one parameter (the directory to check) and return
@code{t} if your VC method is in control here.
+@cindex @code{speedbar-vc-in-control-hook}
The second function is @code{speedbar-vc-in-control-hook}. This hook
-takes two parameters. The @var{PATH} of the file to check, plus the
-@var{FILE} name. Return @code{t} if you want to have the asterisk
+takes two parameters, the @var{path} of the file to check, and the
+@var{file} name. Return @code{t} if you want to have the asterisk
placed near this file.
+@cindex @code{speedbar-vc-indicator}
Lastly, you can change the VC indicator using the variable
@code{speedbar-vc-indicator}, and specify a single character string.
@node Hooks, , Version Control, Customizing
@comment node-name, next, previous, up
@section Hooks
+@cindex hooks
There are several hooks in speedbar allowing custom behaviors to be
added. Available hooks are:
@table @code
+@cindex @code{speedbar-visiting-file-hook}
@item speedbar-visiting-file-hook
Hooks run when speedbar visits a file in the selected frame.
+@cindex @code{speedbar-visiting-tag-hook}
@item speedbar-visiting-tag-hook
Hooks run when speedbar visits a tag in the selected frame.
+@cindex @code{speedbar-load-hook}
@item speedbar-load-hook
Hooks run when speedbar is loaded.
+@cindex @code{speedbar-reconfigure-keymaps-hook}
@item speedbar-reconfigure-keymaps-hook
Hooks run when the keymaps are regenerated. Keymaps are reconfigured
-whenever modes change. This will let you add custom keybindings.
+whenever modes change. This will let you add custom key bindings.
+@cindex @code{speedbar-before-popup-hook}
@item speedbar-before-popup-hook
Hooks called before popping up the speedbar frame.
-New frames are often popped up when "power clicking" on an item to view
+New frames are often popped up when ``power clicking'' on an item to view
it.
+@cindex @code{speedbar-before-delete-hook}
@item speedbar-before-delete-hook
Hooks called before deleting or hiding the speedbar frame.
+@cindex @code{speedbar-mode-hook}
@item speedbar-mode-hook
Hooks called after creating a speedbar buffer.
+@cindex @code{speedbar-timer-hook}
@item speedbar-timer-hook
Hooks called after running the speedbar timer function.
+@cindex @code{speedbar-scanner-reset-hook}
@item speedbar-scanner-reset-hook
Hook called whenever generic scanners are reset.
-Set this to implement your own scanning / rescan safe functions with
+Set this to implement your own scanning or rescan safe functions with
state data.
@end table
@cindex extending
Speedbar can run different types of Major display modes such as Files
-@xref{File Mode}, and Buffers @xref{Buffer Mode}. It can also manage
+(@pxref{File Mode}), and Buffers (@pxref{Buffer Mode}). It can also manage
different minor display modes for use with buffers handling specialized
data.
These major and minor display modes are handled through an extension
system which permits specialized keymaps and menu extensions, in
addition to a unique rendering function. You can also specify a wide
-range of tagging functions. The default uses @file{imenu}, but new
-tagginging methods can be easilly added. In this chapter, you will
+range of tagging functions. The default uses @code{imenu}, but new
+tagging methods can be easily added. In this chapter, you will
learn how to write your own major or minor display modes, and how to
create specialized tagging functions.
@menu
* Minor Display Modes:: How to create a minor display mode.
* Major Display Modes:: How to create a major display mode.
-* Tagging Extentions:: How to create your own tagging methods.
+* Tagging Extensions:: How to create your own tagging methods.
* Creating a display:: How to insert buttons and hierarchies.
@end menu
@section Minor Display Modes
@cindex create minor display mode
-A minor display mode is a mode useful when using a specific type of
+A @dfn{minor display mode} is a mode useful when using a specific type of
buffer. This mode might not be useful for any other kind of data or
mode, or may just be more useful that a files or buffers based mode when
working with a specialized mode.
attached frame.
To enable a minor display mode in your favorite Major mode, follow these
-steps. The string @samp{<name>} is the name of the major mode being
+steps. The string @samp{@var{name}} is the name of the major mode being
augmented with speedbar.
@enumerate
@item
-Create the keymap variable @code{<name>-speedbar-key-map}.
+Create the keymap variable @code{@var{name}-speedbar-key-map}.
+
@item
-Create a function named whatever you like which assigns values into your
+Create a function, named whatever you like, which assigns values into your
keymap. Use this command to create the keymap before assigning
bindings:
-@example
- (setq <name>-speedbar-key-map (speedbar-make-specialized-keymap))
-@end example
+
+@smallexample
+ (setq @var{name}-speedbar-key-map (speedbar-make-specialized-keymap))
+@end smallexample
+
This function creates a special keymap for use in speedbar.
+
@item
Call your install function, or assign it to a hook like this:
-@example
+
+@smallexample
(if (featurep 'speedbar)
- (<name>-install-speedbar-variables)
- (add-hook 'speedbar-load-hook '<name>-install-speedbar-variables))
-@end example
+ (@var{name}-install-speedbar-variables)
+ (add-hook 'speedbar-load-hook '@var{name}-install-speedbar-variables))
+@end smallexample
+
@item
-Create an easymenu compatible vector named @code{<name>-speedbar-menu-items}.
-This will be spliced into speedbar's control menu.
+Create an easymenu compatible vector named
+@code{@var{name}-speedbar-menu-items}. This will be spliced into
+speedbar's control menu.
+
@item
-Create a function called @code{<name>-speedbar-buttons}. This function
+Create a function called @code{@var{name}-speedbar-buttons}. This function
should take one variable, which is the buffer for which it will create
buttons. At this time @code{(current-buffer)} will point to the
uncleared speedbar buffer.
@end enumerate
-When writing @code{<name>-speedbar-buttons}, the first thing you will
+When writing @code{@var{name}-speedbar-buttons}, the first thing you will
want to do is execute a check to see if you need to re-create your
display. If it needs to be cleared, you need to erase the speedbar
-buffer yourself, and start drawing buttons. @xref{Creating a display}.
+buffer yourself, and start drawing buttons. @xref{Creating a display}.
-@node Major Display Modes, Tagging Extentions, Minor Display Modes, Extending
+@node Major Display Modes, Tagging Extensions, Minor Display Modes, Extending
@section Major Display Modes
@cindex create major display mode
-Creating a Major Display Mode for speedbar requires authoring a keymap,
+Creating a @dfn{Major Display Mode} for speedbar requires authoring a keymap,
an easy-menu segment, and writing several functions. These items can be
given any name, and are made the same way as in a minor display mode
-@xref{Minor Display Modes}. Once this is done, these items need to be
+(@pxref{Minor Display Modes}). Once this is done, these items need to be
registered.
Because this setup activity may or may not have speedbar available when
function should create and initialize the keymap, and add your
expansions into the customization tables.
+@cindex @code{speedbar-make-specialized-keymap}
When creating the keymap, use the function
@code{speedbar-make-specialized-keymap} instead of other keymap making
functions. This will provide you with the initial bindings needed.
Some common speedbar functions you might want to bind are:
@table @code
+@cindex @code{speedbar-edit-line}
@item speedbar-edit-line
Edit the item on the current line.
+@cindex @code{speedbar-expand-line}
@item speedbar-expand-line
Expand the item under the cursor.
-With universal argument @key{C-u}, flush cached data before expanding.
+With a numeric argument (@kbd{C-u}), flush cached data before expanding.
+@cindex @code{speedbar-contract-line}
@item speedbar-contract-line
Contract the item under the cursor.
@end table
+@cindex @code{speedbar-line-path}
These function require that function @code{speedbar-line-path} be
correctly overloaded to work.
(setq depth (string-to-int (match-string 1)))))
@end example
+@noindent
where the depth is stored as invisible text at the beginning of each
line.
functions to work (meaning less code for you to write). If your display
does not deal in files, you do not need to overload this function.
+@cindex @code{speedbar-item-info}
The function @code{speedbar-item-info}, however, is very likely to need
overloading. This function takes no parameters and must derive a text
summary to display in the minibuffer.
returns non-nil if it displays a message. They are:
@table @code
+@cindex @code{speedbar-item-info-file-helper}
@item speedbar-item-info-file-helper
-This takes an optional FILENAME parameter. You can derive your own
+This takes an optional @var{filename} parameter. You can derive your own
filename, or it will derive it using a (possibly overloaded) function
@code{speedbar-line-file}. It shows details about a file.
+@cindex @code{speedbar-item-info-tag-helper}
@item speedbar-item-info-tag-helper
If the current line is a tag, then display information about that tag,
-such as it's parent file, and location.
+such as its parent file, and location.
@end table
Your custom function might look like this:
+@example
(defun MyExtension-item-info ()
"Display information about the current line."
(or (speedbar-item-info-tag-helper)
(message "Interesting detail.")))
+@end example
Once you have done all this, speedbar will show an entry in the
-Displays menu declaring that your extension is available.
+@samp{Displays} menu declaring that your extension is available.
-@node Tagging Extentions, Creating a display, Major Display Modes, Extending
-@section Tagging Extentions
+@node Tagging Extensions, Creating a display, Major Display Modes, Extending
+@section Tagging Extensions
It is possible to create new methods for tagging files in speedbar.
-To do this, you need two basic functions. One function will fetch the
-tags from a buffer, and the second will insert them below the filename.
+To do this, you need two basic functions, one function to fetch the
+tags from a buffer, the other to insert them below the filename.
@defun my-fetch-dynamic-tags file
-Parse @var{file} for a list of tags. Return the list, or t if there was
+Parse @var{file} for a list of tags. Return the list, or @code{t} if there was
an error.
@end defun
The non-error return value can be anything, as long as it can be
-inserted by it's paired function:
+inserted by its paired function:
@defun my-insert-tag-list level lst
Insert a list of tags @var{lst} started at indentation level
@var{level}. Creates buttons for each tag, and provides any other
-display information requried.
+display information required.
@end defun
+@cindex @code{speedbar-create-tag-hierarchy}
It is often useful to use @code{speedbar-create-tag-hierarchy} on your
-token list. See that functions documentation for details on what it
+token list. See that function's documentation for details on what it
requires.
+@cindex @code{speedbar-dynamic-tags-function-list}
Once these two functions are written, modify the variable
@code{speedbar-dynamic-tags-function-list} to include your parser at the
beginning, like this:
If your parser is only good for a few types of files, make sure that it
is either a buffer local modification, or that the tag generator returns
-t for non valid buffers.
+@code{t} for non valid buffers.
-@node Creating a display, , Tagging Extentions, Extending
+@node Creating a display, , Tagging Extensions, Extending
@section Creating a display
@cindex creating a display
Rendering a display in speedbar is completely flexible. When your
-button function is called, @xref{Minor Display Modes}, @xref{Major
+button function is called, see @ref{Minor Display Modes}, and @ref{Major
Display Modes}, you have control to @code{insert} anything you want.
The conventions allow almost anything to be inserted, but several helper
functions are provided to make it easy to create the standardized
buttons.
-To understand the built in functions, each "button" in speedbar consists
+To understand the built in functions, each `button' in speedbar consists
of four important pieces of data. The text to be displayed, token
data to be associated with the text, a function to call, and some face to
display it in.
stored in invisible text at the beginning of each line, and is used by
the navigation commands.
-@defun speedbar-insert-button text face mouse function @@optional token prevline
+@defun speedbar-insert-button text face mouse function &optional token prevline
This function inserts one button into the current location.
@var{text} is the text to insert. @var{face} is the face in which it
will be displayed. @var{mouse} is the face to display over the text
Create a tag line with @var{exp-button-type} for the small expansion
button. This is the button that expands or contracts a node (if
-applicable), and @var{exp-button-char} the character in it (+, -, ?,
+applicable), and @var{exp-button-char} the character in it (@samp{+},
+@samp{-}, @samp{?},
etc). @var{exp-button-function} is the function to call if it's clicked
on. Button types are @code{'bracket}, @code{'angle}, @code{'curly},
@code{'expandtag}, @code{'statictag}, or nil. @var{exp-button-data} is
Lastly, @var{depth} shows the depth of expansion.
This function assumes that the cursor is in the speedbar window at the
-position to insert a new item, and that the new item will end with a CR
+position to insert a new item, and that the new item will end with a CR.
@end defun
@defun speedbar-insert-generic-list level list expand-fun find-fun
-At @var{LEVEL}, (the current indentation level desired) insert a generic
+At @var{level}, (the current indentation level desired) insert a generic
multi-level alist @var{list}. Associations with lists get @samp{@{+@}}
tags (to expand into more nodes) and those with positions or other data
-just get a > as the indicator. @samp{@{+@}} buttons will have the
+just get a @samp{>} as the indicator. @samp{@{+@}} buttons will have the
function @var{expand-fun} and the token is the @code{cdr} list. The
token name will have the function @var{find-fun} and not token.
Each element of the list can have one of these forms:
+
@table @code
-@item ("name" . marker-or-number)
-one tag at this level
-@item ("name" ("name" . marker-or-number) ("name" . marker-or-number) ... )
-One group of tags
-@item ("name" marker-or-number ("name" . marker-or-number) ... )
-One Group of tags where the group has a starting position
+@item (@var{name} . marker-or-number)
+One tag at this level.
+@item (@var{name} (@var{name} . marker-or-number) (@var{name} . marker-or-number) ... )
+One group of tags.
+@item (@var{name} marker-or-number (@var{name} . marker-or-number) ... )
+One Group of tags where the group has a starting position.
@end table
When you use @code{speedbar-insert-generic-list}, there are some
@xref{Tag Hierarchy Methods}.
@defvar speedbar-generic-list-group-expand-button-type
-This is the button type used for groups of tags, weather expanded,
+This is the button type used for groups of tags, whether expanded
or added in via a hierarchy method. Two good values are
@code{'curly} and @code{'expandtag}. Curly is the default button, and
@code{'expandtag} is useful if the groups also has a position.
@unnumbered Concept Index
@printindex cp
-@unnumbered Function Index
-@printindex fn
-
@bye
-@c LocalWords: speedbar's xref Keybindings slowbar kbd subsubsection
+@c LocalWords: speedbar's xref slowbar kbd subsubsection
@c LocalWords: keybindings