@echo off\r
rem ----------------------------------------------------------------------\r
rem Configuration script for MSDOS\r
+rem Copyright (C) 1994 Free Software Foundation, Inc.\r
+\r
rem This file is part of GNU Emacs.\r
\r
rem GNU Emacs is free software; you can redistribute it and/or modify\r
rem GNU General Public License for more details.\r
\r
rem You should have received a copy of the GNU General Public License\r
-rem along with GNU Emacs; see the file COPYING. If not, write to\r
-rem the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.\r
+rem along with GNU Emacs; see the file COPYING. If not, write to the\r
+rem Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r
+rem Boston, MA 02111-1307, USA.\r
rem ----------------------------------------------------------------------\r
rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
rem\r
-rem + djgpp.\r
-rem + make utility that allows breaking of 128 chars limit of commands.\r
-rem ndmake (as of version 4.5) won't work due to a line length limit.\r
-rem + rm, mv, chmod (From GNU file utilities).\r
-rem + sed.\r
-rem + patch (Larry Wall's for instance. I think it's supplied with djgpp).\r
+rem + msdos version 3 or better.\r
+rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r
+rem + make utility that allows breaking of the 128 chars limit on\r
+rem command lines. ndmake (as of version 4.5) won't work due to a\r
+rem line length limit. The make that comes with djgpp does work.\r
+rem + rm and mv (from GNU file utilities).\r
+rem + sed (you can use the port that comes with DJGPP).\r
+rem\r
+rem You should be able to get all the above utilities from any SimTel\r
+rem repository, e.g. ftp.coast.net, in the directories\r
+rem "SimTel/vendors/djgpp" and "SimTel/vendors/gnu/gnuish/dos_only". As\r
+rem usual, please use your local mirroring site to reduce trans-Atlantic\r
+rem traffic.\r
rem ----------------------------------------------------------------------\r
-if not "%2" == "" goto usage\r
+set X11=\r
+set nodebug=\r
+set djgpp_ver=\r
+:again\r
+if "%1" == "" goto usage\r
+if "%1" == "--with-x" goto withx\r
+if "%1" == "--no-debug" goto nodebug\r
if "%1" == "msdos" goto msdos\r
:usage\r
-echo Usage: config msdos\r
-echo [Read the script before you run it; also check that you have all the\r
-echo necessary utilities.]\r
+echo Usage: config [--with-x] [--no-debug] msdos\r
+echo [Read the script before you run it.]\r
goto end\r
rem ----------------------------------------------------------------------\r
-:msdos\r
-rem Change to the Emacs root\r
-cd c:\emacs\r
+:withx\r
+set X11=Y\r
+shift\r
+goto again\r
+rem ----------------------------------------------------------------------\r
+:nodebug\r
+set nodebug=Y\r
+shift\r
+goto again\r
rem ----------------------------------------------------------------------\r
+:msdos\r
+Echo Checking whether 'sed' is available...\r
+sed -e "w junk.$$$" <Nul\r
+If Exist junk.$$$ Goto sedOk\r
+Echo To configure 'Emacs' you need to have 'sed'!\r
+Goto End\r
+:sedOk\r
+Echo Checking whether 'rm' is available...\r
+rm -f junk.$$$\r
+If Not Exist junk.$$$ Goto rmOk\r
+Echo To configure 'Emacs' you need to have 'rm'!\r
+Goto End\r
+:rmOk\r
+Echo Checking whether 'mv' is available...\r
+rm -f junk.1 junk.2\r
+echo foo >junk.1\r
+mv junk.1 ./junk.2\r
+If Exist junk.2 Goto mvOk\r
+Echo To configure 'Emacs' you need to have 'mv'!\r
+rm -f junk.1\r
+Goto End\r
+:mvOk\r
+rm -f junk.2\r
+Echo Checking whether 'gcc' is available...\r
+echo main(){} >junk.c\r
+gcc -c junk.c\r
+if exist junk.o goto gccOk\r
+Echo To configure 'Emacs' you need to have 'gcc'!\r
+rm -f junk.c\r
+Goto End\r
+:gccOk\r
+rm -f junk.c junk.o junk junk.exe\r
+Echo Checking what version of DJGPP is installed...\r
+If Not "%DJGPP%" == "" goto djgppOk\r
+Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
+Goto End\r
+:djgppOk\r
+echo int main() >junk.c\r
+echo #ifdef __DJGPP__ >>junk.c\r
+echo {return (__DJGPP__)*10;} >>junk.c\r
+echo #else >>junk.c\r
+echo #ifdef __GO32__ >>junk.c\r
+echo {return 10;} >>junk.c\r
+echo #else >>junk.c\r
+echo {return 0;} >>junk.c\r
+echo #endif >>junk.c\r
+echo #endif >>junk.c\r
+gcc -o junk junk.c\r
+if not exist junk.exe coff2exe junk\r
+junk\r
+If ErrorLevel 10 Goto go32Ok\r
+rm -f junk.c junk junk.exe\r
+Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
+Goto End\r
+:go32Ok\r
+set djgpp_ver=1\r
+If ErrorLevel 20 set djgpp_ver=2\r
+rm -f junk.c junk junk.exe\r
+Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
+Rem ----------------------------------------------------------------------\r
Echo Configuring the source directory...\r
cd src\r
-set PATHSH=paths-h.in\r
-if exist %PATHSH% goto src1\r
-set PATHSH=paths.h-in\r
-if exist %PATHSH% goto src1\r
-echo config: *** The file originally called "src/paths.h.in" cannot be found.\r
-cd ..\r
-goto end\r
-:src1\r
-set CONFIGH=config-h.in\r
-if exist %CONFIGH% goto src2\r
-set CONFIGH=config.h-in\r
-if exist %CONFIGH% goto src2\r
-echo config: *** The file originally called "src/config.h.in" cannot be found.\r
-cd ..\r
-goto end\r
-:src2\r
-set MAKEFILEIN=makefile.in-in\r
-if exist %MAKEFILEIN% goto src3\r
-set MAKEFILEIN=makefile-in.in\r
-if exist %MAKEFILEIN% goto src3\r
-echo makefile: *** The file originally called "src/makefile.in.in" cannot be found.\r
-cd ..\r
-goto end\r
-:src3\r
\r
rem Create "paths.h"\r
-rm -f paths.h\r
-sed -e "s!/lib/emacs!!" -e "s!/usr/local!c:/emacs!" -e "s!/data!/etc!" <%PATHSH% >paths.h\r
+sed -f ../msdos/sed4.inp <paths.in >paths.tmp\r
+update paths.tmp paths.h >nul\r
+rm -f paths.tmp\r
\r
rem Create "config.h"\r
-rm -f config.h\r
-sed -f ../msdos/sed2.inp <%CONFIGH% >config.h\r
+rm -f config.h2 config.tmp\r
+cp config.in config.tmp\r
+if "%X11%" == "" goto src4\r
+sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
+:src4\r
+sed -f ../msdos/sed2.inp <config.tmp >config.h2\r
+update config.h2 config.h >nul\r
+rm -f config.tmp config.h2\r
\r
rem On my system dir.h gets in the way. It's a VMS file so who cares.\r
if exist dir.h ren dir.h vmsdir.h\r
\r
-rem Create "makefile" from "makefile.in.in" using a context patch.\r
-rm -f makefile\r
-cp %MAKEFILEIN% makefile\r
-patch -p1 -B ! -r patch.rjt makefile ../msdos/patch1\r
-echo All hunks above should have passed! If they didn't, you'll have to\r
-echo update manually. That should be easy though.\r
-mv makefile junk.c\r
+rem Create "makefile" from "makefile.in".\r
+rm -f makefile junk.c\r
+sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c\r
+If "%DJGPP_VER%" == "1" Goto mfV1\r
+gcc -E junk.c | sed -f ../msdos/sed1v2.inp >makefile\r
+goto mfDone\r
+:mfV1\r
gcc -E junk.c | sed -f ../msdos/sed1.inp >makefile\r
-del !makefile\r
-del junk.c\r
+:mfDone\r
+rm -f junk.c\r
+\r
+if "%X11%" == "" goto src5\r
+mv makefile makefile.tmp\r
+sed -f ../msdos/sed1x.inp <makefile.tmp >makefile\r
+rm -f makefile.tmp\r
+:src5\r
+\r
+if "%nodebug%" == "" goto src6\r
+sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
+sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >makefile\r
+rm -f makefile.tmp\r
+:src6\r
cd ..\r
rem ----------------------------------------------------------------------\r
Echo Configuring the library source directory...\r
cd lib-src\r
rem Create "makefile" from "makefile.in".\r
-copy makefile makefile.bak >nul\r
-sed -f ../msdos/sed3.inp <makefile.in >makefile\r
+sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c\r
+gcc -E -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
+If "%DJGPP_VER%" == "2" goto libsrc-v2\r
+sed -f ../msdos/sed3.inp <makefile.new >makefile\r
+Goto libsrc2\r
+:libsrc-v2\r
+sed -f ../msdos/sed3v2.inp <makefile.new >makefile\r
+:libsrc2\r
+rm -f makefile.new junk.c\r
+if "%nodebug%" == "" goto libsrc3\r
+sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
+sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >makefile\r
+rm -f makefile.tmp\r
+:libsrc3\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+if "%X11%" == "" goto oldx1\r
+Echo Configuring the oldxmenu directory...\r
+cd oldxmenu\r
+sed -f ../msdos/sed5x.inp <makefile.in >makefile\r
+if "%nodebug%" == "" goto oldx2\r
+sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
+mv -f makefile.tmp makefile\r
+:oldx2\r
cd ..\r
+:oldx1\r
rem ----------------------------------------------------------------------\r
Echo Configuring the main directory...\r
-copy msdos\mainmake makefile >nul\r
+If "%DJGPP_VER%" == "1" goto mainv1\r
+Echo Looking for the GDB init file...\r
+If Exist src\_gdbinit goto gdbinitOk\r
+Echo ERROR:\r
+Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
+Echo the Emacs distribution, but was probably renamed to some other\r
+Echo name without the leading dot when you untarred the archive.\r
+Echo It should be in the "src/" subdirectory. Please make sure this\r
+Echo file exists and is called "_gdbinit" with a leading underscore.\r
+Echo Then run CONFIG.BAT again with the same arguments you did now.\r
+goto End\r
+:gdbinitOk\r
+Echo Looking for the GDB init file...found\r
+copy msdos\mainmake.v2 makefile >nul\r
+:mainv1\r
+If "%DJGPP_VER%" == "1" copy msdos\mainmake makefile >nul\r
rem ----------------------------------------------------------------------\r
:end\r
+set X11=\r
+set nodebug=\r
+set djgpp_ver=\r
HCoop / bpt / emacs.git / blobdiff