:co#132:li#50:\
:is=\E[1;50r\E[50;1H:tc=pcvtXX:
-# Terminfo entries to enable the use of the ncurses library in colour on a
+# Terminfo entries to enable the use of the ncurses library in color on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
# U send ^J
# D send ^V
#
-# S2 7 Screen colour
+# S2 7 Screen color
# U green on black
# D black on green
#
# S2 4 Edit mode (U = local, D = duplex)
# S2 5 Cursor type (U = underline, D = block)
# S2 6 Cursor down key (U = send ^J, D = send ^V)
-# S2 7 Screen colour (U = green on black, D = black on green)
+# S2 7 Screen color (U = green on black, D = black on green)
# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
# this speed.
# dch1 has been commented out because it causes annoying glittering when
# vi deletes one character at the beginning of a line with tabs in it.
-# dch makes sysgen(1M) have a horrible behaviour when deleting
+# dch makes sysgen(1M) have a horrible behavior when deleting
# a screen and makes screen(1) behave badly, so it is disabled too. The nice
# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
# not, so smir and rmir are commented out as well.
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
# me), but I can't find that and the server under my bookmark to "Wyse
# Technical" isn't responding. So there's the question of wether the wy85
-# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# terminfo should reflect the manufactuer's intended behavior of the terminal
# or the actual."
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
#ESC D F set full duplex
#ESC D H set half duplex
#ESC E line insert
-#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
+#ESC F p1 p2 set page color (p1 = f/grnd, p2 = b/grnd)
# 0 = black, 1 = red, 2 = green, 3 = yellow
# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
#ESC G n set serial field attribute (n = 30h - 3Fh)
# = = reverse underline blank
# > = reverse underline blink
# ? = reverse underline blink blank
-# p2, p3: f/grnd, b/grnd colour
-# (see ESC F for colours)
+# p2, p3: f/grnd, b/grnd color
+# (see ESC F for colors)
# use ZZ for mono, eg.
# ESC [ 0 Z Z for normal
# ESC [ 4 Z Z for inverse etc.
# n = 0 normal (KDS7372) mode
# n = 1 Wordstar mode
#
-#ESC b set foreground colour screen
+#ESC b set foreground color screen
#
#ESC c n enter self-test mode:
# n = 0 exit self test mode
# n = 8 graphics memory test
# n = 9 display all 'E'
# n = : display all 'H'
-#ESC d set background colour screen
+#ESC d set background color screen
#
#ESC e n program insert char (n = insert char)
#ESC f text CR load user status line with 'text'
:k7=\E!^G:k8=\E!^H:k9=\E!^I:k;=\E!^J:kb=^H:kd=\E!U:kh=\E!S:\
:kl=\E!V:kr=\E!W:ku=\E!T:le=\ED:ll=\ES7\s:nd=\EC:sf=^J:\
:sr=\ER:up=\EA:
-pe7000c|perkin elmer 7000 series colour monitor:\
+pe7000c|perkin elmer 7000 series color monitor:\
:i1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s:se=\Eb0:so=\Eb2:\
:ue=\E!\0:us=\E!\s:tc=pe7000m:
# The Basis 108 was a Apple II clone, manufactured by the "Basis
# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
# about 1,5 km from where I live, but doesn't build own computers any
-# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
-# equipped with one or two 5.25" disk drives, had a monochrome and colour
+# more). A Basis 108 featured a really heavy (cast aluminum?) case, was
+# equipped with one or two 5.25" disk drives, had a monochrome and color
# video output for a TV set or a dedicated monitor and several slots for
# Apple II cards. Basis 108 were quite popular at german schools before
# the advent of the IBM PC. They run, for example, the UCSD Pascal
# Typical firmware identification F5 "etat 6":
# P287.02.04b (AZERTY)
# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
-# P298.03.03 (monochrome) or P374.03.02 (colour)
+# P298.03.03 (monochrome) or P374.03.02 (color)
#
# SM SDP mode (VIP command): ^[[?=h
# RIS (erases screen): ^[c
:AL@:DL@:al@:ce=\E[K\E[m:cl=\E[2J\E[H:cm@:dl@:\
:ds=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v:\
:ts=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m:tc=tws-generic:
-dku7202|BULL Questar 200 DKU7202 (colour/character attributes):\
+dku7202|BULL Questar 200 DKU7202 (color/character attributes):\
:i2=\E[?3h\Eb:mb=\E[0;2;4m:mh=\E[0;5m:so=\E[0;4;5;7m:\
:ta=^I:us=\E[0;2m:tc=tws-generic:
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
-# systems, although specialized applications like molecular modelling
+# systems, although specialized applications like molecular modeling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)