# `make distclean' should leave only the files that were in the
# distribution.
#
-# make realclean
+# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: C source files
ALLOCA=@ALLOCA@
LN_S=@LN_S@
CFLAGS=@CFLAGS@
+LDFLAGS=@LDFLAGS@
+CPPFLAGS=@CPPFLAGS@
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
YACC=@YACC@
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
-### Libraries which should be edited into lib-src/Makefile.
-libsrc_libs=@libsrc_libs@
-
# ==================== Where To Install Things ====================
# The default location for installation. Everything is placed in
datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
-# runs. These files are all architecture-independent. Right now, the
-# only such data is the locking directory; ${lockdir} is a
-# subdirectory of this.
-statedir=@statedir@
+# runs. These files are all architecture-independent.
+# Right now, this is not used.
+sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data. ${archlibdir} is a subdirectory of this.
-libdir=@libdir@
+libexecdir=@libexecdir@
# Where to install Emacs's man pages, and what extension they should have.
mandir=@mandir@
manext=.1
+man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# system, it is inappropriate to imply that it is part of Emacs.
infodir=@infodir@
+# Where to look for bitmap files.
+bitmapdir=@bitmapdir@
+
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's `--srcdir' option.
+
+# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
# Tell make where to find source files; this is needed for the makefiles.
VPATH=@srcdir@
+# Where to find the application default.
+x_default_search_path=@x_default_search_path@
+
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# building. This is only used during the process of
# compiling Emacs, to help Emacs find its lisp files
# before they've been installed in their final location.
-# It's usually identical to lisppath, except that the
+# It's usually identical to lisppath, except that
+# it does not include locallisppath, and the
# entry for the directory containing the installed lisp
# files has been replaced with ../lisp. This should be a
# colon-separated list of directories.
# at once.
etcdir=@etcdir@
-# Where to create and expect the locking directory, where
-# the Emacs locking code keeps track of which files are
-# currently being edited.
-lockdir=@lockdir@
-
# Where to put executables to be run by Emacs rather than
# the user. This path usually includes the Emacs version
# and configuration name, so that multiple configurations
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
+INSTALL_INFO = install-info
+# By default, we uphold the dignity of our programs.
+INSTALL_STRIP =
# ============================= Targets ==============================
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
-SUBDIR = lib-src src
+SUBDIR = lib-src src leim
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
+SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
+# leim's makefile also knows how to install it, so we don't do that here.
# When installing the info files, we need to do special things to
# avoid nuking an existing dir file, so we don't do that here;
# instead, we have written out explicit code in the `install' targets.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = ${etcdir} ${lispdir}
-all: paths-force ${SUBDIR}
+all: ${SUBDIR}
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
-# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile ${srcdir}/src/paths.h.in
- @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
+# Generate epaths.h from epaths.in. This target is invoked by `configure'.
+epaths-force: FRC
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \
+ x_default_search_path=`echo ${x_default_search_path}`; \
+ sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
- -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
- @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
-
-# For `make all',
-# we force the rebuilding of src/paths.h because the user might give
-# make different values for the various directories. Since we use
-# move-if-change, src/paths.h only actually changes if the user did
-# something notable, so the only unnecessary work we do is in building
-# src/paths.h.tmp, which isn't much.
-# Note that sed is not in /bin on 386bsd.
-paths-force: FRC.src.paths.h
- @echo "Producing \`src/paths.h' from \`src/paths.h.in'."
- @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
- buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
- -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
- -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
- -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
- -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
- -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";')
- @${srcdir}/move-if-change src/paths.h.tmp src/paths.h
+ -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
+ -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
+ -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
+ ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
+
+# For parallel make, src should be build before leim.
+leim: src
-src: lib-src FRC.src src/paths.h
+src: lib-src FRC
-# This ought to depend on src/paths.h, so that in parallel make
-# src/paths.h will be available for the compilations in lib-src.
-# But that causes trouble in `make install' if a different prefix
-# is specified at that time.
-lib-src: FRC.lib-src src/paths.h
+lib-src: FRC src/config.stamp
.RECURSIVE: ${SUBDIR}
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
blessmail: ${SUBDIR_MAKEFILES} src FRC
- cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) MAKE='${MAKE}'
+ cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
+ MAKE='${MAKE}' archlibdir='$(archlibdir)'
+
+Makefile: $(srcdir)/Makefile.in config.status
+ ./config.status
+
+src/Makefile: $(srcdir)/src/Makefile.in config.status
+ ./config.status
-Makefile: Makefile.in config.status
+src/config.stamp: $(srcdir)/src/config.in config.status
./config.status
+ touch src/config.stamp
-src/Makefile: src/Makefile.in.in config.status
+lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
./config.status
-lib-src/Makefile: lib-src/Makefile.in config.status
+man/Makefile: $(srcdir)/man/Makefile.in config.status
./config.status
-oldXMenu/Makefile: oldXMenu/Makefile.in config.status
+oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
./config.status
-lwlib/Makefile: lwlib/Makefile.in config.status
+lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
+ ./config.status
+
+leim/Makefile: $(srcdir)/leim/Makefile.in config.status
./config.status
# ==================== Installation ====================
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
-## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
-## ever modify src/paths.h.
-install: ${SUBDIR} install-arch-dep install-arch-indep blessmail;
-
-### Note that we copy the DOC-* files from the build etc directory
-### as well as lots of things from ${srcdir}/etc.
+### We do install-arch-indep first because
+### the executable needs the Lisp files and DOC file to work properly.
+install: all install-arch-indep install-arch-dep install-leim blessmail
+ @true
+
+### Install the executables that were compiled specifically for this machine.
+### It would be nice to do something for a parallel make
+### to ensure that install-arch-indep finishes before this starts.
install-arch-dep: mkdir
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
- exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
- archlibdir=${archlibdir})
- ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
+ exec_prefix=${exec_prefix} bindir=${bindir} \
+ libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ INSTALL_STRIP=${INSTALL_STRIP})
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version}
-chmod 1755 ${bindir}/emacs-${version}
rm -f ${bindir}/$(EMACS)
-ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
+ for f in `cd lib-src && echo fns-*.el`; do \
+ ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \
+ done
-### Note that we copy the DOC-* files from the build etc directory
-### as well as lots of things from ${srcdir}/etc.
+### Install the files that are machine-independent.
+### Most of them come straight from the distribution;
+### the exception is the DOC-* files, which are copied
+## from the build directory.
+
+## Note that we copy DOC* and then delete DOC
+## as a workaround for a bug in tar on Ultrix 4.2.
install-arch-indep: mkdir
-set ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
- done
+ for dir in ${COPYDIR} ; do \
+ if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
+ rm -rf $$1 ; \
+ fi ; \
+ shift ; \
+ done
-set ${COPYDESTS} ; \
- mkdir ${COPYDESTS} ; \
- for dir in ${COPYDIR} ; do \
- dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir}..." ; \
- (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
- for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
- rm -rf $${subdir}/RCS ; \
- rm -rf $${subdir}/CVS ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/*~ ; \
- done) ; \
- done
+ mkdir ${COPYDESTS} ; \
+ chmod ugo+rx ${COPYDESTS} ; \
+ for dir in ${COPYDIR} ; do \
+ dest=$$1 ; shift ; \
+ [ -d $${dir} ] \
+ && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
+ && (echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -cf - . ) \
+ |(cd $${dest};umask 022; tar -xvf - && cat > /dev/null); \
+ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
+ chmod a+rx $${subdir} ; \
+ rm -rf $${subdir}/RCS ; \
+ rm -rf $${subdir}/CVS ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/[mM]akefile* ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ rm -f $${subdir}/dired.todo ; \
+ done) ; \
+ done
+ -rm -f ${lispdir}/subdirs.el
+ $(srcdir)/update-subdirs ${lispdir}
+ if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
+ then true; \
+ else \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \
+ fi
+ chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el
+ -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \
+ then true; \
+ else \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > ${datadir}/emacs/site-lisp/subdirs.el; \
+ fi
+ -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el
if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
then \
- echo "Copying etc/DOC* ..." ; \
- (cd etc; tar -cf - DOC*)|(cd ${docdir}; umask 0; tar -xvf - ); \
+ echo "Copying etc/DOC-* to ${docdir} ..." ; \
+ (cd ./etc; tar -cf - DOC*) \
+ |(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null); \
+ (cd $(docdir); chmod a+r DOC*; rm DOC); \
+ else true; fi
+ if [ -r ./lisp ] \
+ && [ -r ./lisp/simple.el ] \
+ && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \
+ && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
+ then \
+ echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
+ (cd lisp; tar -cf - *.el *.elc) \
+ |(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null); \
else true; fi
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
then \
- (cd ${srcdir}/info ; \
- if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
- (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
- fi ; \
- for f in cl* dired-x* emacs* forms* gnus* info* sc* vip* ; do \
- (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
+ (cd ${infodir}; \
+ if [ -f dir ]; then true; \
+ else \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \
+ chmod a+r ${infodir}/dir); \
+ fi; \
+ cd ${srcdir}/info ; \
+ for f in ccmode* cl* dired-x* ediff* emacs* forms* gnus* info* message* mh-e* reftex* sc* vip* widget*; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
+ chmod a+r ${infodir}/$$f); \
done); \
else true; fi
- thisdir=`/bin/pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \
- (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \
+ -thisdir=`/bin/pwd`; \
+ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
+ then \
+ for f in ccmode cl dired-x ediff emacs forms gnus info message mh-e reftex sc vip viper widget; do \
+ (cd $${thisdir}; \
+ ${INSTALL_INFO} --dir-file=${infodir}/dir --info-file=${infodir}/$$f); \
+ done; \
+ else true; fi
+ -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir}
+ thisdir=`/bin/pwd`; \
+ cd ${srcdir}/etc; \
+ for page in emacs etags ctags ; do \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
+ chmod a+r ${man1dir}/$${page}${manext}); \
done
+### Install LEIM files. Although they are machine-independent, we
+### have separate target here instead of including it in
+### `install-arch-indep'. People who extracted LEIM files after they
+### insalled Emacs itself can install only LEIM files by this target.
+install-leim: leim/Makefile mkdir
+ cd leim; $(MAKE) install
+
+### Build Emacs and install it, stripping binaries while installing them.
+install-strip:
+ $(MAKE) INSTALL_STRIP=-s
+
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
-### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
-### instead of mkdir. Not all systems' mkdirs have the `-p' flag.
-mkdir: FRC.mkdir
- ./lib-src/make-path ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
- ${bindir} ${datadir} ${docdir} ${libdir} \
+### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
+### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
+mkdir: FRC
+ if [ -d ${datadir} ]; then true; else \
+ $(srcdir)/mkinstalldirs ${datadir}; \
+ chmod a+r ${datadir};\
+ fi
+ $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
+ ${bindir} ${docdir} ${libexecdir} \
+ ${datadir}/emacs/site-lisp \
+ ${datadir}/emacs/${version}/site-lisp \
`echo ${locallisppath} | sed 's/:/ /g'`
- -chmod 777 ${lockdir}
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would
(cd lib-src; \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
for dir in ${lispdir} ${etcdir} ; do \
if [ -d $${dir} ]; then \
case `(cd $${dir} ; /bin/pwd)` in \
esac ; \
fi ; \
done
- (cd ${infodir}; rm -f cl* emacs* forms* info* vip*)
- (cd ${mandir}; rm -f emacs.1 etags.1 ctags.1)
- (cd ${bindir}; rm -f emacs-${version} emacs)
+ (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
+ (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1)
+ (cd ${bindir} && rm -f emacs-${version} $(EMACS))
-### Some makes seem to remember that they've built something called FRC,
-### so you can only use a given FRC once per makefile.
-FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.mkdir:
-FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean:
+FRC:
# ==================== Cleaning up and miscellanea ====================
-.PHONY: mostlyclean clean distclean realclean extraclean
+.PHONY: mostlyclean clean distclean maintainer-clean extraclean
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
### normally don't want to recompile. For example, the `mostlyclean'
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
-mostlyclean: FRC.mostlyclean
+mostlyclean: FRC
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
-(cd man && $(MAKE) $(MFLAGS) mostlyclean)
+ (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
### `clean'
### Delete all files from the current directory that are normally
### with them.
###
### Delete `.dvi' files here if they are not part of the distribution.
-clean: FRC.clean
+clean: FRC
(cd src; $(MAKE) $(MFLAGS) clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
-(cd man && $(MAKE) $(MFLAGS) clean)
+ (cd leim; $(MAKE) $(MFLAGS) clean)
### `distclean'
### Delete all files from the current directory that are created by
### `make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
- rm -f config.status build-install ; \
+ rm -f config.status config.cache config.log ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
- (cd lock ; rm -f *)
-distclean: FRC.distclean
+ if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
+distclean: FRC
(cd src; $(MAKE) $(MFLAGS) distclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
(cd man && $(MAKE) $(MFLAGS) distclean)
+ (cd leim; $(MAKE) $(MFLAGS) distclean)
${top_distclean}
-
-### `realclean'
+### `maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
-### One exception, however: `make realclean' should not delete
+### One exception, however: `make maintainer-clean' should not delete
### `configure' even if `configure' can be remade using a rule in the
-### Makefile. More generally, `make realclean' should not delete
+### Makefile. More generally, `make maintainer-clean' should not delete
### anything that needs to exist in order to run `configure' and then
### begin to build the program.
-realclean: FRC.realclean
- (cd src; $(MAKE) $(MFLAGS) realclean)
- (cd oldXMenu; $(MAKE) $(MFLAGS) realclean)
- (cd lwlib; $(MAKE) $(MFLAGS) realclean)
- (cd lib-src; $(MAKE) $(MFLAGS) realclean)
- -(cd man && $(MAKE) $(MFLAGS) realclean)
+maintainer-clean: FRC
+ (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
+ -(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
### it deletes backup and autosave files too.
extraclean:
for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
- -(cd lock; rm *)
- -rm config.status config-tmp-*
+ ${top_distclean}
+ -rm config-tmp-*
-rm -f *~ \#*
### Unlocking and relocking. The idea of these productions is to reduce
### Note: it's no disaster if these productions miss a file or two; tar
### and VC will swiftly let you know if this happens, and it is easily
### corrected.
-SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
- README build-install.in configure make-dist move-if-change
+SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \
+ README configure make-dist move-if-change
.PHONY: unlock relock
unlock:
- chmod u+w $(SOURCES) cpp/*
+ chmod u+w $(SOURCES)
-(cd elisp; chmod u+w Makefile README *.texi)
(cd etc; $(MAKE) $(MFLAGS) unlock)
(cd lib-src; $(MAKE) $(MFLAGS) unlock)
(cd src; $(MAKE) $(MFLAGS) unlock)
relock:
- chmod u-w $(SOURCES) cpp/*
+ chmod u-w $(SOURCES)
-(cd elisp; chmod u-w Makefile README *.texi)
(cd etc; $(MAKE) $(MFLAGS) relock)
(cd lib-src; $(MAKE) $(MFLAGS) relock)
(cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) relock)
-TAGS tags: lib-src
- cd ${srcdir}/src; $(MAKE) tags
+TAGS tags: lib-src src
+ # The src subdir knows how to do the right thing
+ # even when the build directory and source dir are different.
+ cd src; $(MAKE) tags
check:
@echo "We don't have any tests for GNU Emacs yet."
.PHONY: info dvi dist check
force-info:
info: force-info
- (cd ${srcdir}/man; $(MAKE) $(MFLAGS) info)
+ # Note that man/Makefile knows how to
+ # put the info files in $(srcdir),
+ # so we can do ok running make in the build dir.
+ (cd man; $(MAKE) $(MFLAGS) info)
dvi:
- (cd ${srcdir}/man; $(MAKE) $(MFLAGS) dvi)
+ (cd man; $(MAKE) $(MFLAGS) dvi)
HCoop / bpt / emacs.git / blobdiff