rem GNU General Public License for more details.\r
\r
rem You should have received a copy of the GNU General Public License\r
-rem along with GNU Emacs; see the file COPYING. If not, write to\r
-rem the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.\r
+rem along with GNU Emacs; see the file COPYING. If not, write to the\r
+rem Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r
+rem Boston, MA 02111-1307, USA.\r
rem ----------------------------------------------------------------------\r
rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
rem\r
rem + msdos version 3 or better.\r
-rem + djgpp version 1,11 maint 4 or better (but not version 2).\r
+rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r
rem + make utility that allows breaking of the 128 chars limit on\r
rem command lines. ndmake (as of version 4.5) won't work due to a\r
rem line length limit. The make that comes with djgpp does work.\r
-rem + rm, mv, chmod (From GNU file utilities).\r
-rem + sed.\r
+rem + rm and mv (from GNU file utilities).\r
+rem + sed (you can use the port that comes with DJGPP).\r
rem\r
-rem You should be able to get all the above utilities from\r
-rem oak.oakland.edu in the directories\r
-rem "/pub/msdos/djgpp" and "/pub/msdos/gnuish". There are other mirror
-rem sites as well.\r
+rem You should be able to get all the above utilities from any SimTel\r
+rem repository, e.g. ftp.simtel.net, in the directory\r
+rem "pub/simtelnet/gnu/djgpp/v2gnu". As usual, please use your local\r
+rem mirroring site to reduce trans-Atlantic traffic.\r
rem ----------------------------------------------------------------------\r
set X11=\r
set nodebug=\r
+set djgpp_ver=\r
+if "%1" == "" goto usage\r
+rem ----------------------------------------------------------------------\r
+rem See if their environment is large enough. We need 28 bytes.\r
+set $foo$=789012345678901234567\r
+if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r
+set $foo$=\r
:again\r
if "%1" == "" goto usage\r
if "%1" == "--with-x" goto withx\r
Echo Checking whether 'mv' is available...\r
rm -f junk.1 junk.2\r
echo foo >junk.1\r
-mv junk.1 junk.2\r
+mv junk.1 ./junk.2\r
If Exist junk.2 Goto mvOk\r
Echo To configure 'Emacs' you need to have 'mv'!\r
rm -f junk.1\r
rm -f junk.c\r
Goto End\r
:gccOk\r
-rm -f junk.c junk.o\r
+rm -f junk.c junk.o junk junk.exe\r
+Echo Checking what version of DJGPP is installed...\r
+If Not "%DJGPP%" == "" goto djgppOk\r
+Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
+Goto End\r
+:djgppOk\r
+echo int main() >junk.c\r
+echo #ifdef __DJGPP__ >>junk.c\r
+echo {return (__DJGPP__)*10;} >>junk.c\r
+echo #else >>junk.c\r
+echo #ifdef __GO32__ >>junk.c\r
+echo {return 10;} >>junk.c\r
+echo #else >>junk.c\r
+echo {return 0;} >>junk.c\r
+echo #endif >>junk.c\r
+echo #endif >>junk.c\r
+gcc -o junk junk.c\r
+if not exist junk.exe coff2exe junk\r
+junk\r
+If ErrorLevel 10 Goto go32Ok\r
+rm -f junk.c junk junk.exe\r
+Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
+Goto End\r
+:go32Ok\r
+set djgpp_ver=1\r
+If ErrorLevel 20 set djgpp_ver=2\r
+rm -f junk.c junk junk.exe\r
+Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
Rem ----------------------------------------------------------------------\r
Echo Configuring the source directory...\r
cd src\r
\r
-rem Create "paths.h"\r
-sed -f ../msdos/sed4.inp <paths.in >paths.tmp\r
-update paths.tmp paths.h >nul\r
-rm -f paths.tmp\r
+rem Create "epaths.h"\r
+sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r
+update epaths.tmp epaths.h >nul\r
+rm -f epaths.tmp\r
\r
rem Create "config.h"\r
rm -f config.h2 config.tmp\r
-cp config.in config.tmp\r
+sed -e '' config.in > config.tmp\r
if "%X11%" == "" goto src4\r
sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
:src4\r
if exist dir.h ren dir.h vmsdir.h\r
\r
rem Create "makefile" from "makefile.in".\r
-rm -f makefile junk.c\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c\r
-gcc -E junk.c | sed -f ../msdos/sed1.inp >makefile\r
+rm -f Makefile junk.c\r
+sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r
+If "%DJGPP_VER%" == "1" Goto mfV1\r
+gcc -E junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
+goto mfDone\r
+:mfV1\r
+gcc -E junk.c | sed -f ../msdos/sed1.inp >Makefile\r
+:mfDone\r
rm -f junk.c\r
\r
if "%X11%" == "" goto src5\r
-mv makefile makefile.tmp\r
-sed -f ../msdos/sed1x.inp <makefile.tmp >makefile\r
+mv Makefile makefile.tmp\r
+sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:src5\r
\r
if "%nodebug%" == "" goto src6\r
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
-mv -f makefile.tmp makefile\r
+sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
+rm -f makefile.tmp\r
:src6\r
cd ..\r
rem ----------------------------------------------------------------------\r
Echo Configuring the library source directory...\r
cd lib-src\r
rem Create "makefile" from "makefile.in".\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c\r
+sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r
gcc -E -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
-sed -f ../msdos/sed3.inp <makefile.new >makefile\r
-rm -f makefile.new junk.c\r
-if "%nodebug%" == "" goto libsrc2\r
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
-mv -f makefile.tmp makefile\r
+If "%DJGPP_VER%" == "2" goto libsrc-v2\r
+sed -f ../msdos/sed3.inp <makefile.new >Makefile\r
+Goto libsrc2\r
+:libsrc-v2\r
+sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r
:libsrc2\r
+rm -f makefile.new junk.c\r
+if "%nodebug%" == "" goto libsrc3\r
+sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
+rm -f makefile.tmp\r
+:libsrc3\r
cd ..\r
rem ----------------------------------------------------------------------\r
if "%X11%" == "" goto oldx1\r
Echo Configuring the oldxmenu directory...\r
cd oldxmenu\r
-sed -f ../msdos/sed5x.inp <makefile.in >makefile\r
+sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
if "%nodebug%" == "" goto oldx2\r
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp\r
-mv -f makefile.tmp makefile\r
+sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+mv -f makefile.tmp Makefile\r
:oldx2\r
cd ..\r
:oldx1\r
rem ----------------------------------------------------------------------\r
+Echo Configuring the manual directory...\r
+cd man\r
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+If not Exist leim\quail\latin-pre.el goto maindir\r
+Echo Configuring the leim directory...\r
+cd leim\r
+sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+:maindir\r
Echo Configuring the main directory...\r
-copy msdos\mainmake makefile >nul\r
+If "%DJGPP_VER%" == "1" goto mainv1\r
+Echo Looking for the GDB init file...\r
+If not Exist src\_gdbinit If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
+If Exist src\_gdbinit goto gdbinitOk\r
+Echo ERROR:\r
+Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
+Echo the Emacs distribution, but was probably renamed to some other\r
+Echo name without the leading dot when you untarred the archive.\r
+Echo It should be in the "src/" subdirectory. Please make sure this\r
+Echo file exists and is called "_gdbinit" with a leading underscore.\r
+Echo Then run CONFIG.BAT again with the same arguments you did now.\r
+goto End\r
+:gdbinitOk\r
+Echo Looking for the GDB init file...found\r
+copy msdos\mainmake.v2 Makefile >nul\r
+:mainv1\r
+If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r
rem ----------------------------------------------------------------------\r
+goto End\r
+:SmallEnv\r
+echo Your environment size is too small. Please enlarge it and run me again.\r
+echo For example, type "command.com /e:2048" to have 2048 bytes available.\r
+set $foo$=\r
:end\r
set X11=\r
set nodebug=\r
+set djgpp_ver=\r
HCoop / bpt / emacs.git / blobdiff