/* Keyboard and mouse input; editor command loop.
- Copyright (C) 1985,86,87,88,89,93,94,95,96,97,99, 2000, 01, 02
+ Copyright (C) 1985,86,87,88,89,93,94,95,96,97,99,2000,01,02,03,04
Free Software Foundation, Inc.
This file is part of GNU Emacs.
/* Symbols to denote kinds of events. */
Lisp_Object Qfunction_key;
Lisp_Object Qmouse_click;
-#if defined(WINDOWSNT) || defined(MAC_OSX)
-Lisp_Object Qmouse_wheel;
-#endif
#ifdef WINDOWSNT
Lisp_Object Qlanguage_change;
#endif
Lisp_Object Qvertical_scroll_bar;
Lisp_Object Qmenu_bar;
extern Lisp_Object Qleft_margin, Qright_margin;
+extern Lisp_Object Qleft_fringe, Qright_fringe;
+extern Lisp_Object QCmap;
Lisp_Object recursive_edit_unwind (), command_loop ();
Lisp_Object Fthis_command_keys ();
/* Replace a dash from echo_dash with a space, otherwise
add a space at the end as a separator between keys. */
if (STRINGP (echo_string)
- && SCHARS (echo_string) > 0)
+ && SCHARS (echo_string) > 1)
{
- Lisp_Object last_char, idx;
+ Lisp_Object last_char, prev_char, idx;
+
+ idx = make_number (SCHARS (echo_string) - 2);
+ prev_char = Faref (echo_string, idx);
idx = make_number (SCHARS (echo_string) - 1);
last_char = Faref (echo_string, idx);
- if (XINT (last_char) == '-')
+ /* We test PREV_CHAR to make sure this isn't the echoing
+ of a minus-sign. */
+ if (XINT (last_char) == '-' && XINT (prev_char) != ' ')
Faset (echo_string, idx, make_number (' '));
else
echo_string = concat2 (echo_string, build_string (" "));
int beg, end;
Lisp_Object val, overlay, tmp;
int check_composition = 1, check_display = 1, check_invisible = 1;
+ int orig_pt = PT;
+ /* FIXME: cycling is probably not necessary because these properties
+ can't be usefully combined anyway. */
while (check_composition || check_display || check_invisible)
{
if (check_composition
/* Move away from the inside area. */
if (beg < PT && end > PT)
{
- SET_PT (PT < last_pt ? beg : end);
+ SET_PT ((orig_pt == PT && (last_pt < beg || last_pt > end))
+ /* We haven't moved yet (so we don't need to fear
+ infinite-looping) and we were outside the range
+ before (so either end of the range still corresponds
+ to a move in the right direction): pretend we moved
+ less than we actually did, so that we still have
+ more freedom below in choosing which end of the range
+ to go to. */
+ ? (orig_pt = -1, PT < last_pt ? end : beg)
+ /* We either have moved already or the last point
+ was already in the range: we don't get to choose
+ which end of the range we have to go to. */
+ : (PT < last_pt ? beg : end));
check_composition = check_display = 1;
}
xassert (PT == beg || PT == end);
safe_run_hooks_error (data)
Lisp_Object data;
{
+ Lisp_Object args[3];
+ args[0] = build_string ("Error in %s: %s");
+ args[1] = Vinhibit_quit;
+ args[2] = data;
+ Fmessage (3, args);
return Fset (Vinhibit_quit, Qnil);
}
{
Lisp_Object posn;
- posn = POSN_BUFFER_POSN (EVENT_START (c));
+ posn = POSN_POSN (EVENT_START (c));
/* Handle menu-bar events:
insert the dummy prefix event `menu-bar'. */
if (EQ (posn, Qmenu_bar) || EQ (posn, Qtool_bar))
{
/* Change menu-bar to (menu-bar) as the event "position". */
- POSN_BUFFER_SET_POSN (EVENT_START (c), Fcons (posn, Qnil));
+ POSN_SET_POSN (EVENT_START (c), Fcons (posn, Qnil));
also_record = c;
Vunread_command_events = Fcons (c, Vunread_command_events);
sp = kbd_buffer;
if (sp->kind == MOUSE_CLICK_EVENT
+ || sp->kind == WHEEL_EVENT
#ifdef WINDOWSNT
|| sp->kind == W32_SCROLL_BAR_CLICK_EVENT
#endif
&& !EQ (frame, selected_frame))
obj = make_lispy_switch_frame (frame);
internal_last_event_frame = frame;
- kbd_fetch_ptr = event + 1;
- }
- else if (event->kind == SELECT_WINDOW_EVENT)
- {
- /* Make an event (select-window (WINDOW)). */
- obj = Fcons (event->frame_or_window, Qnil);
- obj = Fcons (Qselect_window, Fcons (obj, Qnil));
-
kbd_fetch_ptr = event + 1;
}
else
static Lisp_Object accent_key_syms;
static Lisp_Object func_key_syms;
static Lisp_Object mouse_syms;
-#if defined(WINDOWSNT) || defined(MAC_OSX)
-static Lisp_Object mouse_wheel_syms;
-#endif
+static Lisp_Object wheel_syms;
static Lisp_Object drag_n_drop_syms;
/* This is a list of keysym codes for special "accent" characters.
Lisp_Object Vlispy_mouse_stem;
-#if defined(WINDOWSNT) || defined(MAC_OSX)
-/* mouse-wheel events are generated by the wheel on devices such as
- the MS Intellimouse. The wheel sits in between the left and right
- mouse buttons, and is typically used to scroll or zoom the window
- underneath the pointer. mouse-wheel events specify the object on
- which they operate, and a delta corresponding to the amount and
- direction that the wheel is rotated. Clicking the mouse-wheel
- generates a mouse-2 event. */
-static char *lispy_mouse_wheel_names[] =
-{
- "mouse-wheel"
+static char *lispy_wheel_names[] =
+{
+ "wheel-up", "wheel-down"
};
-#endif /* WINDOWSNT */
-
/* drag-n-drop events are generated when a set of selected files are
dragged from another application and dropped onto an Emacs window. */
static char *lispy_drag_n_drop_names[] =
int double_click_count;
+/* Return position of a mouse click or wheel event */
+
+static Lisp_Object
+make_lispy_position (f, x, y, time)
+ struct frame *f;
+ Lisp_Object *x, *y;
+ unsigned long time;
+{
+ Lisp_Object window;
+ enum window_part part;
+ Lisp_Object posn = Qnil;
+ Lisp_Object extra_info = Qnil;
+ int wx, wy;
+
+ /* Set `window' to the window under frame pixel coordinates (x,y) */
+ if (f)
+ window = window_from_coordinates (f, XINT (*x), XINT (*y),
+ &part, &wx, &wy, 0);
+ else
+ window = Qnil;
+
+ if (WINDOWP (window))
+ {
+ /* It's a click in window window at frame coordinates (x,y) */
+ struct window *w = XWINDOW (window);
+ Lisp_Object string_info = Qnil;
+ int textpos = -1, rx = -1, ry = -1;
+ int dx = -1, dy = -1;
+ int width = -1, height = -1;
+ Lisp_Object object = Qnil;
+
+ /* Set event coordinates to window-relative coordinates
+ for constructing the Lisp event below. */
+ XSETINT (*x, wx);
+ XSETINT (*y, wy);
+
+ if (part == ON_MODE_LINE || part == ON_HEADER_LINE)
+ {
+ /* Mode line or header line. Look for a string under
+ the mouse that may have a `local-map' property. */
+ Lisp_Object string;
+ int charpos;
+
+ posn = part == ON_MODE_LINE ? Qmode_line : Qheader_line;
+ rx = wx, ry = wy;
+ string = mode_line_string (w, part, &rx, &ry, &charpos,
+ &object, &dx, &dy, &width, &height);
+ if (STRINGP (string))
+ string_info = Fcons (string, make_number (charpos));
+ if (w == XWINDOW (selected_window))
+ textpos = PT;
+ else
+ textpos = XMARKER (w->pointm)->charpos;
+ }
+ else if (part == ON_VERTICAL_BORDER)
+ {
+ posn = Qvertical_line;
+ wx = -1;
+ dx = 0;
+ width = 1;
+ }
+ else if (part == ON_LEFT_MARGIN || part == ON_RIGHT_MARGIN)
+ {
+ Lisp_Object string;
+ int charpos;
+
+ posn = (part == ON_LEFT_MARGIN) ? Qleft_margin : Qright_margin;
+ rx = wx, ry = wy;
+ string = marginal_area_string (w, part, &rx, &ry, &charpos,
+ &object, &dx, &dy, &width, &height);
+ if (STRINGP (string))
+ string_info = Fcons (string, make_number (charpos));
+ }
+ else if (part == ON_LEFT_FRINGE || part == ON_RIGHT_FRINGE)
+ {
+ posn = (part == ON_LEFT_FRINGE) ? Qleft_fringe : Qright_fringe;
+ rx = 0;
+ dx = wx;
+ if (part == ON_RIGHT_FRINGE)
+ dx -= (window_box_width (w, LEFT_MARGIN_AREA)
+ + window_box_width (w, TEXT_AREA)
+ + (WINDOW_HAS_FRINGES_OUTSIDE_MARGINS (w)
+ ? window_box_width (w, RIGHT_MARGIN_AREA)
+ : 0));
+ else if (!WINDOW_HAS_FRINGES_OUTSIDE_MARGINS (w))
+ dx -= window_box_width (w, LEFT_MARGIN_AREA);
+ }
+
+ if (textpos < 0)
+ {
+ Lisp_Object string2, object2 = Qnil;
+ struct display_pos p;
+ int dx2, dy2;
+ int width2, height2;
+ wx = max (WINDOW_LEFT_MARGIN_WIDTH (w), wx);
+ string2 = buffer_posn_from_coords (w, &wx, &wy, &p,
+ &object2, &dx2, &dy2,
+ &width2, &height2);
+ textpos = CHARPOS (p.pos);
+ if (rx < 0) rx = wx;
+ if (ry < 0) ry = wy;
+ if (dx < 0) dx = dx2;
+ if (dy < 0) dy = dy2;
+ if (width < 0) width = width2;
+ if (height < 0) height = height2;
+
+ if (NILP (posn))
+ {
+ posn = make_number (textpos);
+ if (STRINGP (string2))
+ string_info = Fcons (string2,
+ make_number (CHARPOS (p.string_pos)));
+ }
+ if (NILP (object))
+ object = object2;
+ }
+
+#ifdef HAVE_WINDOW_SYSTEM
+ if (IMAGEP (object))
+ {
+ Lisp_Object image_map, hotspot;
+ if ((image_map = Fplist_get (XCDR (object), QCmap),
+ !NILP (image_map))
+ && (hotspot = find_hot_spot (image_map, dx, dy),
+ CONSP (hotspot))
+ && (hotspot = XCDR (hotspot), CONSP (hotspot)))
+ posn = XCAR (hotspot);
+ }
+#endif
+
+ /* Object info */
+ extra_info = Fcons (object,
+ Fcons (Fcons (make_number (dx),
+ make_number (dy)),
+ Fcons (Fcons (make_number (width),
+ make_number (height)),
+ Qnil)));
+
+ /* String info */
+ extra_info = Fcons (string_info,
+ Fcons (make_number (textpos),
+ Fcons (Fcons (make_number (rx),
+ make_number (ry)),
+ extra_info)));
+ }
+ else if (f != 0)
+ {
+ XSETFRAME (window, f);
+ }
+ else
+ {
+ window = Qnil;
+ XSETFASTINT (*x, 0);
+ XSETFASTINT (*y, 0);
+ }
+
+ return Fcons (window,
+ Fcons (posn,
+ Fcons (Fcons (*x, *y),
+ Fcons (make_number (time),
+ extra_info))));
+}
+
/* Given a struct input_event, build the lisp event which represents
it. If EVENT is 0, build a mouse movement event from the mouse
movement buffer, which should have a movement event in it.
case MULTIBYTE_CHAR_KEYSTROKE_EVENT:
{
Lisp_Object lispy_c;
+ int c = event->code;
- XSETFASTINT (lispy_c, event->code);
+ /* Add in the other modifier bits. We took care of ctrl_modifier
+ just above, and the shift key was taken care of by the X code,
+ and applied to control characters by make_ctrl_char. */
+ c |= (event->modifiers
+ & (meta_modifier | alt_modifier
+ | hyper_modifier | super_modifier | ctrl_modifier));
+ /* What about the `shift' modifier ? */
+ button_down_time = 0;
+ XSETFASTINT (lispy_c, c);
return lispy_c;
}
Lisp_Object position;
Lisp_Object *start_pos_ptr;
Lisp_Object start_pos;
- Lisp_Object window;
position = Qnil;
/* Build the position as appropriate for this mouse click. */
if (event->kind == MOUSE_CLICK_EVENT)
{
- enum window_part part;
struct frame *f = XFRAME (event->frame_or_window);
- Lisp_Object posn;
- Lisp_Object string_info = Qnil;
+#if ! defined (USE_X_TOOLKIT) && ! defined (USE_GTK)
int row, column;
+#endif
/* Ignore mouse events that were made on frame that
have been deleted. */
if (! FRAME_LIVE_P (f))
return Qnil;
+#if ! defined (USE_X_TOOLKIT) && ! defined (USE_GTK)
/* EVENT->x and EVENT->y are frame-relative pixel
coordinates at this place. Under old redisplay, COLUMN
and ROW are set to frame relative glyph coordinates
pixel_to_glyph_coords (f, XINT (event->x), XINT (event->y),
&column, &row, NULL, 1);
-#if ! defined (USE_X_TOOLKIT) && ! defined (USE_GTK)
/* In the non-toolkit version, clicks on the menu bar
are ordinary button events in the event buffer.
Distinguish them, and invoke the menu.
}
#endif /* not USE_X_TOOLKIT && not USE_GTK */
- /* Set `window' to the window under frame pixel coordinates
- event->x/event->y. */
- window = window_from_coordinates (f, XINT (event->x),
- XINT (event->y), &part, 0);
-
- if (!WINDOWP (window))
- {
- window = event->frame_or_window;
- posn = Qnil;
- }
- else
- {
- /* It's a click in window window at frame coordinates
- event->x/ event->y. */
- struct window *w = XWINDOW (window);
-
- /* Get window relative coordinates. Original code
- `rounded' this to glyph boundaries. */
- int wx = FRAME_TO_WINDOW_PIXEL_X (w, XINT (event->x));
- int wy = FRAME_TO_WINDOW_PIXEL_Y (w, XINT (event->y));
-
- /* Set event coordinates to window-relative coordinates
- for constructing the Lisp event below. */
- XSETINT (event->x, wx);
- XSETINT (event->y, wy);
-
- if (part == ON_MODE_LINE || part == ON_HEADER_LINE)
- {
- /* Mode line or header line. Look for a string under
- the mouse that may have a `local-map' property. */
- Lisp_Object string;
- int charpos;
-
- posn = part == ON_MODE_LINE ? Qmode_line : Qheader_line;
- string = mode_line_string (w, wx, wy, part, &charpos);
- if (STRINGP (string))
- string_info = Fcons (string, make_number (charpos));
- }
- else if (part == ON_VERTICAL_BORDER)
- posn = Qvertical_line;
- else if (part == ON_LEFT_MARGIN || part == ON_RIGHT_MARGIN)
- {
- int charpos;
- Lisp_Object object = marginal_area_string (w, wx, wy, part,
- &charpos);
- posn = (part == ON_LEFT_MARGIN) ? Qleft_margin : Qright_margin;
- if (STRINGP (object))
- string_info = Fcons (object, make_number (charpos));
- }
- else
- {
- Lisp_Object object;
- struct display_pos p;
- buffer_posn_from_coords (w, &wx, &wy, &object, &p);
- posn = make_number (CHARPOS (p.pos));
- if (STRINGP (object))
- string_info
- = Fcons (object,
- make_number (CHARPOS (p.string_pos)));
- }
- }
-
- position
- = Fcons (window,
- Fcons (posn,
- Fcons (Fcons (event->x, event->y),
- Fcons (make_number (event->timestamp),
- (NILP (string_info)
- ? Qnil
- : Fcons (string_info, Qnil))))));
+ position = make_lispy_position (f, &event->x, &event->y,
+ event->timestamp);
}
#ifndef USE_TOOLKIT_SCROLL_BARS
else
{
/* It's a scrollbar click. */
+ Lisp_Object window;
Lisp_Object portion_whole;
Lisp_Object part;
}
}
+ case WHEEL_EVENT:
+ {
+ Lisp_Object position;
+ Lisp_Object head;
+
+ /* Build the position as appropriate for this mouse click. */
+ struct frame *f = XFRAME (event->frame_or_window);
+
+ /* Ignore wheel events that were made on frame that have been
+ deleted. */
+ if (! FRAME_LIVE_P (f))
+ return Qnil;
+
+ position = make_lispy_position (f, &event->x, &event->y,
+ event->timestamp);
+
+ /* Set double or triple modifiers to indicate the wheel speed. */
+ {
+ /* On window-system frames, use the value of
+ double-click-fuzz as is. On other frames, interpret it
+ as a multiple of 1/8 characters. */
+ struct frame *f;
+ int fuzz;
+ int is_double;
+
+ if (WINDOWP (event->frame_or_window))
+ f = XFRAME (XWINDOW (event->frame_or_window)->frame);
+ else if (FRAMEP (event->frame_or_window))
+ f = XFRAME (event->frame_or_window);
+ else
+ abort ();
+
+ if (FRAME_WINDOW_P (f))
+ fuzz = double_click_fuzz;
+ else
+ fuzz = double_click_fuzz / 8;
+
+ is_double = (last_mouse_button < 0
+ && (abs (XINT (event->x) - last_mouse_x) <= fuzz)
+ && (abs (XINT (event->y) - last_mouse_y) <= fuzz)
+ && button_down_time != 0
+ && (EQ (Vdouble_click_time, Qt)
+ || (INTEGERP (Vdouble_click_time)
+ && ((int)(event->timestamp - button_down_time)
+ < XINT (Vdouble_click_time)))));
+ if (is_double)
+ {
+ double_click_count++;
+ event->modifiers |= ((double_click_count > 2)
+ ? triple_modifier
+ : double_modifier);
+ }
+ else
+ {
+ double_click_count = 1;
+ event->modifiers |= click_modifier;
+ }
+
+ button_down_time = event->timestamp;
+ /* Use a negative value to distinguish wheel from mouse button. */
+ last_mouse_button = -1;
+ last_mouse_x = XINT (event->x);
+ last_mouse_y = XINT (event->y);
+ }
+
+ {
+ int symbol_num;
+
+ if (event->modifiers & up_modifier)
+ {
+ /* Emit a wheel-up event. */
+ event->modifiers &= ~up_modifier;
+ symbol_num = 0;
+ }
+ else if (event->modifiers & down_modifier)
+ {
+ /* Emit a wheel-down event. */
+ event->modifiers &= ~down_modifier;
+ symbol_num = 1;
+ }
+ else
+ /* Every wheel event should either have the down_modifier or
+ the up_modifier set. */
+ abort ();
+
+ /* Get the symbol we should use for the wheel event. */
+ head = modify_event_symbol (symbol_num,
+ event->modifiers,
+ Qmouse_click,
+ Qnil,
+ lispy_wheel_names,
+ &wheel_syms,
+ ASIZE (wheel_syms));
+ }
+
+ if (event->modifiers & (double_modifier | triple_modifier))
+ return Fcons (head,
+ Fcons (position,
+ Fcons (make_number (double_click_count),
+ Qnil)));
+ else
+ return Fcons (head,
+ Fcons (position,
+ Qnil));
+ }
+
+
#ifdef USE_TOOLKIT_SCROLL_BARS
/* We don't have down and up events if using toolkit scroll bars,
}
}
#endif /* WINDOWSNT */
-#if defined(WINDOWSNT) || defined(MAC_OSX)
- case MOUSE_WHEEL_EVENT:
- {
- enum window_part part;
- FRAME_PTR f = XFRAME (event->frame_or_window);
- Lisp_Object window;
- Lisp_Object posn;
- Lisp_Object head, position;
- int row, column;
-
- /* Ignore mouse events that were made on frame that
- have been deleted. */
- if (! FRAME_LIVE_P (f))
- return Qnil;
- pixel_to_glyph_coords (f, XINT (event->x), XINT (event->y),
- &column, &row, NULL, 1);
- window = window_from_coordinates (f, XINT (event->x),
- XINT (event->y), &part, 0);
-
- if (!WINDOWP (window))
- {
- window = event->frame_or_window;
- posn = Qnil;
- }
- else
- {
- int pixcolumn, pixrow;
- column -= XINT (XWINDOW (window)->left);
- row -= XINT (XWINDOW (window)->top);
- glyph_to_pixel_coords (XWINDOW(window), column, row,
- &pixcolumn, &pixrow);
- XSETINT (event->x, pixcolumn);
- XSETINT (event->y, pixrow);
-
- if (part == ON_MODE_LINE)
- posn = Qmode_line;
- else if (part == ON_VERTICAL_BORDER)
- posn = Qvertical_line;
- else if (part == ON_HEADER_LINE)
- posn = Qheader_line;
- else
- {
- Lisp_Object object;
- struct display_pos p;
- buffer_posn_from_coords (XWINDOW (window), &column, &row,
- &object, &p);
- posn = make_number (CHARPOS (p.pos));
- }
- }
-
- {
- Lisp_Object head, position;
-
- position
- = Fcons (window,
- Fcons (posn,
- Fcons (Fcons (event->x, event->y),
- Fcons (make_number (event->timestamp),
- Qnil))));
-
- head = modify_event_symbol (0, event->modifiers,
- Qmouse_wheel, Qnil,
- lispy_mouse_wheel_names,
- &mouse_wheel_syms, 1);
- return Fcons (head,
- Fcons (position,
- /* Insert 1 here so event-click-count works. */
- Fcons (make_number (1),
- Fcons (make_number (event->code),
- Qnil))));
- }
- }
-#endif /* WINDOWSNT || MAC_OSX */
case DRAG_N_DROP_EVENT:
{
- enum window_part part;
FRAME_PTR f;
- Lisp_Object window;
- Lisp_Object posn;
+ Lisp_Object head, position;
Lisp_Object files;
/* The frame_or_window field should be a cons of the frame in
if (! FRAME_LIVE_P (f))
return Qnil;
- window = window_from_coordinates (f, XINT (event->x),
- XINT (event->y), &part, 0);
-
- if (!WINDOWP (window))
- {
- window = XCAR (event->frame_or_window);
- posn = Qnil;
- }
- else
- {
- /* It's an event in window `window' at frame coordinates
- event->x/ event->y. */
- struct window *w = XWINDOW (window);
-
- /* Get window relative coordinates. */
- int wx = FRAME_TO_WINDOW_PIXEL_X (w, XINT (event->x));
- int wy = FRAME_TO_WINDOW_PIXEL_Y (w, XINT (event->y));
-
- /* Set event coordinates to window-relative coordinates
- for constructing the Lisp event below. */
- XSETINT (event->x, wx);
- XSETINT (event->y, wy);
-
- if (part == ON_MODE_LINE)
- posn = Qmode_line;
- else if (part == ON_VERTICAL_BORDER)
- posn = Qvertical_line;
- else if (part == ON_HEADER_LINE)
- posn = Qheader_line;
- else
- {
- Lisp_Object object;
- struct display_pos p;
- buffer_posn_from_coords (w, &wx, &wy, &object, &p);
- posn = make_number (CHARPOS (p.pos));
- }
- }
-
- {
- Lisp_Object head, position;
-
- position
- = Fcons (window,
- Fcons (posn,
- Fcons (Fcons (event->x, event->y),
- Fcons (make_number (event->timestamp),
- Qnil))));
-
- head = modify_event_symbol (0, event->modifiers,
- Qdrag_n_drop, Qnil,
- lispy_drag_n_drop_names,
- &drag_n_drop_syms, 1);
- return Fcons (head,
- Fcons (position,
- Fcons (files,
- Qnil)));
- }
+ position = make_lispy_position (f, &event->x, &event->y,
+ event->timestamp);
+
+ head = modify_event_symbol (0, event->modifiers,
+ Qdrag_n_drop, Qnil,
+ lispy_drag_n_drop_names,
+ &drag_n_drop_syms, 1);
+ return Fcons (head,
+ Fcons (position,
+ Fcons (files,
+ Qnil)));
}
#endif /* HAVE_MOUSE */
return event->arg;
#endif
+ case SELECT_WINDOW_EVENT:
+ /* Make an event (select-window (WINDOW)). */
+ return Fcons (Qselect_window,
+ Fcons (Fcons (event->frame_or_window, Qnil),
+ Qnil));
+
case TOOL_BAR_EVENT:
if (EQ (event->arg, event->frame_or_window))
/* This is the prefix key. We translate this to
/* Or is it an ordinary mouse movement? */
else
{
- enum window_part area;
- Lisp_Object window;
- Lisp_Object posn;
+ Lisp_Object position;
- if (frame)
- /* It's in a frame; which window on that frame? */
- window = window_from_coordinates (frame, XINT (x), XINT (y), &area, 0);
- else
- window = Qnil;
-
- if (WINDOWP (window))
- {
- struct window *w = XWINDOW (window);
- int wx, wy;
-
- /* Get window relative coordinates. */
- wx = FRAME_TO_WINDOW_PIXEL_X (w, XINT (x));
- wy = FRAME_TO_WINDOW_PIXEL_Y (w, XINT (y));
- XSETINT (x, wx);
- XSETINT (y, wy);
-
- if (area == ON_MODE_LINE)
- posn = Qmode_line;
- else if (area == ON_VERTICAL_BORDER)
- posn = Qvertical_line;
- else if (area == ON_HEADER_LINE)
- posn = Qheader_line;
- else
- {
- Lisp_Object object;
- struct display_pos p;
- buffer_posn_from_coords (w, &wx, &wy, &object, &p);
- posn = make_number (CHARPOS (p.pos));
- }
- }
- else if (frame != 0)
- {
- XSETFRAME (window, frame);
- posn = Qnil;
- }
- else
- {
- window = Qnil;
- posn = Qnil;
- XSETFASTINT (x, 0);
- XSETFASTINT (y, 0);
- }
+ position = make_lispy_position (frame, &x, &y, time);
return Fcons (Qmouse_movement,
- Fcons (Fcons (window,
- Fcons (posn,
- Fcons (Fcons (x, y),
- Fcons (make_number (time),
- Qnil)))),
+ Fcons (position,
Qnil));
}
}
break;
#undef SINGLE_LETTER_MOD
+
+#define MULTI_LETTER_MOD(BIT, NAME, LEN) \
+ if (i + LEN + 1 <= SBYTES (name) \
+ && ! strncmp (SDATA (name) + i, NAME, LEN)) \
+ { \
+ this_mod_end = i + LEN; \
+ this_mod = BIT; \
+ }
+
+ case 'd':
+ MULTI_LETTER_MOD (drag_modifier, "drag", 4);
+ MULTI_LETTER_MOD (down_modifier, "down", 4);
+ MULTI_LETTER_MOD (double_modifier, "double", 6);
+ break;
+
+ case 't':
+ MULTI_LETTER_MOD (triple_modifier, "triple", 6);
+ break;
+#undef MULTI_LETTER_MOD
+
}
/* If we found no modifier, stop looking for them. */
SBYTES (SYMBOL_NAME (symbol)) - end),
Qnil);
- if (modifiers & ~VALMASK)
+ if (modifiers & ~INTMASK)
abort ();
XSETFASTINT (mask, modifiers);
elements = Fcons (unmodified, Fcons (mask, Qnil));
Lisp_Object cache, index, entry, new_symbol;
/* Mask out upper bits. We don't know where this value's been. */
- modifiers &= VALMASK;
+ modifiers &= INTMASK;
/* The click modifier never figures into cache indices. */
cache = Fget (base, Qmodifier_cache);
entry = Fcons (index, new_symbol);
Fput (base, Qmodifier_cache, Fcons (entry, cache));
- /* We have the parsing info now for free, so add it to the caches. */
- XSETFASTINT (index, modifiers);
- Fput (new_symbol, Qevent_symbol_element_mask,
- Fcons (base, Fcons (index, Qnil)));
- Fput (new_symbol, Qevent_symbol_elements,
- Fcons (base, lispy_modifier_list (modifiers)));
+ /* We have the parsing info now for free, so we could add it to
+ the caches:
+ XSETFASTINT (index, modifiers);
+ Fput (new_symbol, Qevent_symbol_element_mask,
+ Fcons (base, Fcons (index, Qnil)));
+ Fput (new_symbol, Qevent_symbol_elements,
+ Fcons (base, lispy_modifier_list (modifiers)));
+ Sadly, this is only correct if `base' is indeed a base event,
+ which is not necessarily the case. -stef */
}
/* Make sure this symbol is of the same kind as BASE.
{
struct input_event event;
Lisp_Object tem;
+ EVENT_INIT (event);
event.kind = BUFFER_SWITCH_EVENT;
event.frame_or_window = Qnil;
register int i;
int nread;
+ for (i = 0; i < KBD_BUFFER_SIZE; i++)
+ EVENT_INIT (buf[i]);
+
if (read_socket_hook)
/* No need for FIONREAD or fcntl; just say don't wait. */
nread = (*read_socket_hook) (input_fd, buf, KBD_BUFFER_SIZE, expected);
/* ??? Is it really right to send the signal just to this process
rather than to the whole process group?
Perhaps on systems with FIONREAD Emacs is alone in its group. */
- kill (getpid (), SIGHUP);
+ {
+ if (! noninteractive)
+ kill (getpid (), SIGHUP);
+ else
+ n_to_read = 0;
+ }
if (n_to_read == 0)
return 0;
if (n_to_read > sizeof cbuf)
}
#endif /* not VMS */
\f
+void
+handle_async_input ()
+{
+#ifdef BSD4_1
+ extern int select_alarmed;
+#endif
+ interrupt_input_pending = 0;
+
+ while (1)
+ {
+ int nread;
+ nread = read_avail_input (1);
+ /* -1 means it's not ok to read the input now.
+ UNBLOCK_INPUT will read it later; now, avoid infinite loop.
+ 0 means there was no keyboard input available. */
+ if (nread <= 0)
+ break;
+
+#ifdef BSD4_1
+ select_alarmed = 1; /* Force the select emulator back to life */
+#endif
+ }
+}
+
#ifdef SIGIO /* for entire page */
/* Note SIGIO has been undef'd if FIONREAD is missing. */
-SIGTYPE
+static SIGTYPE
input_available_signal (signo)
int signo;
{
/* Must preserve main program's value of errno. */
int old_errno = errno;
-#ifdef BSD4_1
- extern int select_alarmed;
-#endif
#if defined (USG) && !defined (POSIX_SIGNALS)
/* USG systems forget handlers when they are used;
if (input_available_clear_time)
EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0);
- while (1)
- {
- int nread;
- nread = read_avail_input (1);
- /* -1 means it's not ok to read the input now.
- UNBLOCK_INPUT will read it later; now, avoid infinite loop.
- 0 means there was no keyboard input available. */
- if (nread <= 0)
- break;
-
-#ifdef BSD4_1
- select_alarmed = 1; /* Force the select emulator back to life */
+#ifdef SYNC_INPUT
+ interrupt_input_pending = 1;
+#else
+ handle_async_input ();
#endif
- }
#ifdef BSD4_1
sigfree ();
reinvoke_input_signal ()
{
#ifdef SIGIO
- kill (getpid (), SIGIO);
+ handle_async_input ();
#endif
}
\f
-static void menu_bar_item P_ ((Lisp_Object, Lisp_Object));
-static void menu_bar_one_keymap P_ ((Lisp_Object));
+static void menu_bar_item P_ ((Lisp_Object, Lisp_Object, Lisp_Object, void*));
+static Lisp_Object menu_bar_one_keymap_changed_items;
/* These variables hold the vector under construction within
menu_bar_items and its subroutines, and the current index
def = get_keymap (access_keymap (maps[mapno], Qmenu_bar, 1, 0, 1),
0, 1);
if (CONSP (def))
- menu_bar_one_keymap (def);
+ {
+ menu_bar_one_keymap_changed_items = Qnil;
+ map_keymap (def, menu_bar_item, Qnil, NULL, 1);
+ }
}
/* Move to the end those items that should be at the end. */
return menu_bar_items_vector;
}
\f
-/* Scan one map KEYMAP, accumulating any menu items it defines
- in menu_bar_items_vector. */
-
-static Lisp_Object menu_bar_one_keymap_changed_items;
-
-static void
-menu_bar_one_keymap (keymap)
- Lisp_Object keymap;
-{
- Lisp_Object tail, item;
-
- menu_bar_one_keymap_changed_items = Qnil;
-
- /* Loop over all keymap entries that have menu strings. */
- for (tail = keymap; CONSP (tail); tail = XCDR (tail))
- {
- item = XCAR (tail);
- if (CONSP (item))
- menu_bar_item (XCAR (item), XCDR (item));
- else if (VECTORP (item))
- {
- /* Loop over the char values represented in the vector. */
- int len = XVECTOR (item)->size;
- int c;
- for (c = 0; c < len; c++)
- {
- Lisp_Object character;
- XSETFASTINT (character, c);
- menu_bar_item (character, XVECTOR (item)->contents[c]);
- }
- }
- }
-}
-
/* Add one item to menu_bar_items_vector, for KEY, ITEM_STRING and DEF.
If there's already an item for KEY, add this DEF to it. */
Lisp_Object item_properties;
static void
-menu_bar_item (key, item)
- Lisp_Object key, item;
+menu_bar_item (key, item, dummy1, dummy2)
+ Lisp_Object key, item, dummy1;
+ void *dummy2;
{
struct gcpro gcpro1;
int i;
{
Lisp_Object old;
old = XVECTOR (menu_bar_items_vector)->contents[i + 2];
- XVECTOR (menu_bar_items_vector)->contents[i + 2] = Fcons (item, old);
+ /* If the new and the old items are not both keymaps,
+ the lookup will only find `item'. */
+ item = Fcons (item, KEYMAPP (item) && KEYMAPP (XCAR (old)) ? old : Qnil);
+ XVECTOR (menu_bar_items_vector)->contents[i + 2] = item;
}
}
\f
register Lisp_Object name;
int nlength;
/* FIXME: Use the minibuffer's frame width. */
- int width = FRAME_WIDTH (SELECTED_FRAME ()) - 4;
+ int width = FRAME_COLS (SELECTED_FRAME ()) - 4;
int idx = -1;
int nobindings = 1;
Lisp_Object rest, vector;
int nmaps;
{
int i, first_binding;
- int did_meta = 0;
first_binding = nmaps;
for (i = nmaps - 1; i >= 0; i--)
{
if (! NILP (current[i]))
{
- Lisp_Object map;
- if (did_meta)
- map = defs[i];
- else
- map = current[i];
-
- defs[i] = access_keymap (map, key, 1, 0, 1);
+ defs[i] = access_keymap (current[i], key, 1, 0, 1);
if (! NILP (defs[i]))
first_binding = i;
}
such as Vfunction_key_map and Vkey_translation_map. */
typedef struct keyremap
{
- Lisp_Object map;
+ Lisp_Object map, parent;
int start, end;
} keyremap;
+/* Lookup KEY in MAP.
+ MAP is a keymap mapping keys to key vectors or functions.
+ If the mapping is a function and DO_FUNCTION is non-zero, then
+ the function is called with PROMPT as parameter and its return
+ value is used as the return value of this function (after checking
+ that it is indeed a vector). */
+
+static Lisp_Object
+access_keymap_keyremap (map, key, prompt, do_funcall)
+ Lisp_Object map, key, prompt;
+ int do_funcall;
+{
+ Lisp_Object next;
+
+ next = access_keymap (map, key, 1, 0, 1);
+
+ /* Handle symbol with autoload definition. */
+ if (SYMBOLP (next) && !NILP (Ffboundp (next))
+ && CONSP (XSYMBOL (next)->function)
+ && EQ (XCAR (XSYMBOL (next)->function), Qautoload))
+ do_autoload (XSYMBOL (next)->function, next);
+
+ /* Handle a symbol whose function definition is a keymap
+ or an array. */
+ if (SYMBOLP (next) && !NILP (Ffboundp (next))
+ && (!NILP (Farrayp (XSYMBOL (next)->function))
+ || KEYMAPP (XSYMBOL (next)->function)))
+ next = XSYMBOL (next)->function;
+
+ /* If the keymap gives a function, not an
+ array, then call the function with one arg and use
+ its value instead. */
+ if (SYMBOLP (next) && !NILP (Ffboundp (next)) && do_funcall)
+ {
+ Lisp_Object tem;
+ tem = next;
+
+ next = call1 (next, prompt);
+ /* If the function returned something invalid,
+ barf--don't ignore it.
+ (To ignore it safely, we would need to gcpro a bunch of
+ other variables.) */
+ if (! (VECTORP (next) || STRINGP (next)))
+ error ("Function %s returns invalid key sequence", tem);
+ }
+ return next;
+}
+
+/* Do one step of the key remapping used for function-key-map and
+ key-translation-map:
+ KEYBUF is the buffer holding the input events.
+ BUFSIZE is its maximum size.
+ FKEY is a pointer to the keyremap structure to use.
+ INPUT is the index of the last element in KEYBUF.
+ DOIT if non-zero says that the remapping can actually take place.
+ DIFF is used to return the number of keys added/removed by the remapping.
+ PARENT is the root of the keymap.
+ PROMPT is the prompt to use if the remapping happens through a function.
+ The return value is non-zero if the remapping actually took place. */
+
+static int
+keyremap_step (keybuf, bufsize, fkey, input, doit, diff, prompt)
+ Lisp_Object *keybuf, prompt;
+ keyremap *fkey;
+ int input, doit, *diff, bufsize;
+{
+ Lisp_Object next, key;
+
+ key = keybuf[fkey->end++];
+ next = access_keymap_keyremap (fkey->map, key, prompt, doit);
+
+ /* If keybuf[fkey->start..fkey->end] is bound in the
+ map and we're in a position to do the key remapping, replace it with
+ the binding and restart with fkey->start at the end. */
+ if ((VECTORP (next) || STRINGP (next)) && doit)
+ {
+ int len = XFASTINT (Flength (next));
+ int i;
+
+ *diff = len - (fkey->end - fkey->start);
+
+ if (input + *diff >= bufsize)
+ error ("Key sequence too long");
+
+ /* Shift the keys that follow fkey->end. */
+ if (*diff < 0)
+ for (i = fkey->end; i < input; i++)
+ keybuf[i + *diff] = keybuf[i];
+ else if (*diff > 0)
+ for (i = input - 1; i >= fkey->end; i--)
+ keybuf[i + *diff] = keybuf[i];
+ /* Overwrite the old keys with the new ones. */
+ for (i = 0; i < len; i++)
+ keybuf[fkey->start + i]
+ = Faref (next, make_number (i));
+
+ fkey->start = fkey->end += *diff;
+ fkey->map = fkey->parent;
+
+ return 1;
+ }
+
+ fkey->map = get_keymap (next, 0, 1);
+
+ /* If we no longer have a bound suffix, try a new position for
+ fkey->start. */
+ if (!CONSP (fkey->map))
+ {
+ fkey->end = ++fkey->start;
+ fkey->map = fkey->parent;
+ }
+ return 0;
+}
/* Read a sequence of keys that ends with a non prefix character,
storing it in KEYBUF, a buffer of size BUFSIZE.
/* Likewise, for key_translation_map. */
volatile keyremap keytran;
- /* If we receive a ``switch-frame'' event in the middle of a key sequence,
- we put it off for later. While we're reading, we keep the event here. */
+ /* If we receive a `switch-frame' or `select-window' event in the middle of
+ a key sequence, we put it off for later.
+ While we're reading, we keep the event here. */
volatile Lisp_Object delayed_switch_frame;
/* See the comment below... */
last_nonmenu_event = Qnil;
delayed_switch_frame = Qnil;
- fkey.map = Vfunction_key_map;
- keytran.map = Vkey_translation_map;
+ fkey.map = fkey.parent = Vfunction_key_map;
+ keytran.map = keytran.parent = Vkey_translation_map;
/* If there is no translation-map, turn off scanning. */
fkey.start = fkey.end = KEYMAPP (fkey.map) ? 0 : bufsize + 1;
keytran.start = keytran.end = KEYMAPP (keytran.map) ? 0 : bufsize + 1;
just one key. */
volatile int echo_local_start, keys_local_start, local_first_binding;
+ eassert (fkey.end == t || (fkey.end > t && fkey.end <= mock_input));
+ eassert (fkey.start <= fkey.end);
+ eassert (keytran.start <= keytran.end);
/* key-translation-map is applied *after* function-key-map. */
eassert (keytran.end <= fkey.start);
keybuf[i - first_unbound - 1] = keybuf[i];
mock_input = t - first_unbound - 1;
fkey.end = fkey.start -= first_unbound + 1;
- fkey.map = Vfunction_key_map;
+ fkey.map = fkey.parent;
keytran.end = keytran.start -= first_unbound + 1;
- keytran.map = Vkey_translation_map;
+ keytran.map = keytran.parent;
goto replay_sequence;
}
Vquit_flag = Qnil;
if (EVENT_HAS_PARAMETERS (key)
+ /* Either a `switch-frame' or a `select-window' event. */
&& EQ (EVENT_HEAD_KIND (EVENT_HEAD (key)), Qswitch_frame))
{
/* If we're at the beginning of a key sequence, and the caller
if (EVENT_HAS_PARAMETERS (key))
{
Lisp_Object kind;
+ Lisp_Object string;
kind = EVENT_HEAD_KIND (EVENT_HEAD (key));
if (EQ (kind, Qmouse_click))
Lisp_Object window, posn;
window = POSN_WINDOW (EVENT_START (key));
- posn = POSN_BUFFER_POSN (EVENT_START (key));
+ posn = POSN_POSN (EVENT_START (key));
if (CONSP (posn)
|| (!NILP (fake_prefixed_keys)
localized_local_map = 1;
start = EVENT_START (key);
- if (CONSP (start) && CONSP (XCDR (start)))
+ if (CONSP (start) && POSN_INBUFFER_P (start))
{
pos = POSN_BUFFER_POSN (start);
if (INTEGERP (pos)
/* If on a mode line string with a local keymap,
reconsider the key sequence with that keymap. */
- if (CONSP (POSN_STRING (EVENT_START (key))))
+ if (string = POSN_STRING (EVENT_START (key)),
+ (CONSP (string) && STRINGP (XCAR (string))))
{
- Lisp_Object string, pos, map, map2;
+ Lisp_Object pos, map, map2;
- string = POSN_STRING (EVENT_START (key));
pos = XCDR (string);
string = XCAR (string);
if (XINT (pos) >= 0
goto replay_key;
}
- else if (CONSP (POSN_STRING (EVENT_START (key)))
- && NILP (from_string))
+ else if (NILP (from_string)
+ && (string = POSN_STRING (EVENT_START (key)),
+ (CONSP (string) && STRINGP (XCAR (string)))))
{
/* For a click on a string, i.e. overlay string or a
string displayed via the `display' property,
consider `local-map' and `keymap' properties of
that string. */
- Lisp_Object string, pos, map, map2;
+ Lisp_Object pos, map, map2;
- string = POSN_STRING (EVENT_START (key));
pos = XCDR (string);
string = XCAR (string);
if (XINT (pos) >= 0
{
Lisp_Object posn;
- posn = POSN_BUFFER_POSN (EVENT_START (key));
+ posn = POSN_POSN (EVENT_START (key));
/* Handle menu-bar events:
insert the dummy prefix event `menu-bar'. */
if (EQ (posn, Qmenu_bar) || EQ (posn, Qtool_bar))
/* Zap the position in key, so we know that we've
expanded it, and don't try to do so again. */
- POSN_BUFFER_SET_POSN (EVENT_START (key),
- Fcons (posn, Qnil));
+ POSN_SET_POSN (EVENT_START (key),
+ Fcons (posn, Qnil));
mock_input = t + 2;
goto replay_sequence;
xterm-mouse-mode. -stef
Isn't this just the most wonderful code ever? */
+
+ /* If mock_input > t + 1, the above simplification
+ will actually end up dropping keys on the floor.
+ This is probably OK for now, but even
+ if mock_input <= t + 1, we need to adjust fkey
+ and keytran.
+ Typical case [header-line down-mouse-N]:
+ mock_input = 2, t = 1, fkey.end = 1,
+ last_real_key_start = 0. */
+ if (fkey.end > last_real_key_start)
+ {
+ fkey.end = fkey.start
+ = min (last_real_key_start, fkey.start);
+ fkey.map = fkey.parent;
+ if (keytran.end > last_real_key_start)
+ {
+ keytran.end = keytran.start
+ = min (last_real_key_start, keytran.start);
+ keytran.map = keytran.parent;
+ }
+ }
if (t == last_real_key_start)
{
mock_input = 0;
invariant that keytran.end <= fkey.start). */
{
if (fkey.start < t)
- (fkey.start = fkey.end = t, fkey.map = Vfunction_key_map);
+ (fkey.start = fkey.end = t, fkey.map = fkey.parent);
}
else
/* If the sequence is unbound, see if we can hang a function key
off the end of it. */
- {
- Lisp_Object next;
-
- /* Continue scan from fkey.end until we find a bound suffix.
- If we fail, increment fkey.start and start over from there. */
- while (fkey.end < t)
- {
- Lisp_Object key;
-
- key = keybuf[fkey.end++];
- next = access_keymap (fkey.map, key, 1, 0, 1);
-
- /* Handle symbol with autoload definition. */
- if (SYMBOLP (next) && ! NILP (Ffboundp (next))
- && CONSP (XSYMBOL (next)->function)
- && EQ (XCAR (XSYMBOL (next)->function), Qautoload))
- do_autoload (XSYMBOL (next)->function, next);
-
- /* Handle a symbol whose function definition is a keymap
- or an array. */
- if (SYMBOLP (next) && ! NILP (Ffboundp (next))
- && (!NILP (Farrayp (XSYMBOL (next)->function))
- || KEYMAPP (XSYMBOL (next)->function)))
- next = XSYMBOL (next)->function;
-
-#if 0 /* I didn't turn this on, because it might cause trouble
- for the mapping of return into C-m and tab into C-i. */
- /* Optionally don't map function keys into other things.
- This enables the user to redefine kp- keys easily. */
- if (SYMBOLP (key) && !NILP (Vinhibit_function_key_mapping))
- next = Qnil;
-#endif
-
- /* If the function key map gives a function, not an
- array, then call the function with no args and use
- its value instead. */
- if (SYMBOLP (next) && ! NILP (Ffboundp (next))
- /* If there's a binding (i.e. first_binding >= nmaps)
- we don't want to apply this function-key-mapping. */
- && fkey.end == t && first_binding >= nmaps)
- {
- struct gcpro gcpro1, gcpro2, gcpro3;
- Lisp_Object tem;
- tem = next;
-
- GCPRO3 (fkey.map, keytran.map, delayed_switch_frame);
- next = call1 (next, prompt);
- UNGCPRO;
- /* If the function returned something invalid,
- barf--don't ignore it.
- (To ignore it safely, we would need to gcpro a bunch of
- other variables.) */
- if (! (VECTORP (next) || STRINGP (next)))
- error ("Function in key-translation-map returns invalid key sequence");
- }
-
- /* If keybuf[fkey.start..fkey.end] is bound in the
- function key map and it's a suffix of the current
- sequence (i.e. fkey.end == t), replace it with
- the binding and restart with fkey.start at the end. */
- if ((VECTORP (next) || STRINGP (next))
- /* If there's a binding (i.e. first_binding >= nmaps)
- we don't want to apply this function-key-mapping. */
- && fkey.end == t && first_binding >= nmaps)
- {
- int len = XFASTINT (Flength (next));
-
- t = fkey.start + len;
- if (t >= bufsize)
- error ("Key sequence too long");
-
- if (VECTORP (next))
- bcopy (XVECTOR (next)->contents,
- keybuf + fkey.start,
- (t - fkey.start) * sizeof (keybuf[0]));
- else if (STRINGP (next))
- {
- int i;
-
- for (i = 0; i < len; i++)
- XSETFASTINT (keybuf[fkey.start + i], SREF (next, i));
- }
-
- mock_input = t;
- fkey.start = fkey.end = t;
- fkey.map = Vfunction_key_map;
-
- /* Do pass the results through key-translation-map.
- But don't retranslate what key-translation-map
- has already translated. */
- keytran.end = keytran.start;
- keytran.map = Vkey_translation_map;
-
- goto replay_sequence;
- }
-
- fkey.map = get_keymap (next, 0, 1);
-
- /* If we no longer have a bound suffix, try a new positions for
- fkey.start. */
- if (!CONSP (fkey.map))
- {
- fkey.end = ++fkey.start;
- fkey.map = Vfunction_key_map;
- }
- }
- }
-
- /* Look for this sequence in key-translation-map. */
- {
- Lisp_Object next;
-
- /* Scan from keytran.end until we find a bound suffix. */
- while (keytran.end < fkey.start)
+ /* Continue scan from fkey.end until we find a bound suffix. */
+ while (fkey.end < t)
{
- Lisp_Object key;
-
- key = keybuf[keytran.end++];
- next = access_keymap (keytran.map, key, 1, 0, 1);
-
- /* Handle symbol with autoload definition. */
- if (SYMBOLP (next) && ! NILP (Ffboundp (next))
- && CONSP (XSYMBOL (next)->function)
- && EQ (XCAR (XSYMBOL (next)->function), Qautoload))
- do_autoload (XSYMBOL (next)->function, next);
-
- /* Handle a symbol whose function definition is a keymap
- or an array. */
- if (SYMBOLP (next) && ! NILP (Ffboundp (next))
- && (!NILP (Farrayp (XSYMBOL (next)->function))
- || KEYMAPP (XSYMBOL (next)->function)))
- next = XSYMBOL (next)->function;
-
- /* If the key translation map gives a function, not an
- array, then call the function with one arg and use
- its value instead. */
- if (SYMBOLP (next) && ! NILP (Ffboundp (next)))
- {
- struct gcpro gcpro1, gcpro2, gcpro3;
- Lisp_Object tem;
- tem = next;
-
- GCPRO3 (fkey.map, keytran.map, delayed_switch_frame);
- next = call1 (next, prompt);
- UNGCPRO;
- /* If the function returned something invalid,
- barf--don't ignore it.
- (To ignore it safely, we would need to gcpro a bunch of
- other variables.) */
- if (! (VECTORP (next) || STRINGP (next)))
- error ("Function in key-translation-map returns invalid key sequence");
- }
-
- /* If keybuf[keytran.start..keytran.end] is bound in the
- key translation map and it's a suffix of the current
- sequence (i.e. keytran.end == t), replace it with
- the binding and restart with keytran.start at the end. */
- if ((VECTORP (next) || STRINGP (next)))
+ struct gcpro gcpro1, gcpro2, gcpro3;
+ int done, diff;
+
+ GCPRO3 (fkey.map, keytran.map, delayed_switch_frame);
+ done = keyremap_step (keybuf, bufsize, &fkey,
+ max (t, mock_input),
+ /* If there's a binding (i.e.
+ first_binding >= nmaps) we don't want
+ to apply this function-key-mapping. */
+ fkey.end + 1 == t && first_binding >= nmaps,
+ &diff, prompt);
+ UNGCPRO;
+ if (done)
{
- int len = XFASTINT (Flength (next));
- int i, diff = len - (keytran.end - keytran.start);
-
- mock_input = max (t, mock_input);
- if (mock_input + diff >= bufsize)
- error ("Key sequence too long");
-
- /* Shift the keys that are after keytran.end. */
- if (diff < 0)
- for (i = keytran.end; i < mock_input; i++)
- keybuf[i + diff] = keybuf[i];
- else if (diff > 0)
- for (i = mock_input - 1; i >= keytran.end; i--)
- keybuf[i + diff] = keybuf[i];
- /* Replace the keys between keytran.start and keytran.end
- with those from next. */
- for (i = 0; i < len; i++)
- keybuf[keytran.start + i]
- = Faref (next, make_number (i));
-
- mock_input += diff;
- keytran.start = keytran.end += diff;
- keytran.map = Vkey_translation_map;
-
- /* Adjust the function-key-map counters. */
- fkey.start += diff;
- fkey.end += diff;
-
+ mock_input = diff + max (t, mock_input);
goto replay_sequence;
}
+ }
- keytran.map = get_keymap (next, 0, 1);
+ /* Look for this sequence in key-translation-map.
+ Scan from keytran.end until we find a bound suffix. */
+ while (keytran.end < fkey.start)
+ {
+ struct gcpro gcpro1, gcpro2, gcpro3;
+ int done, diff;
- /* If we no longer have a bound suffix, try a new positions for
- keytran.start. */
- if (!CONSP (keytran.map))
- {
- keytran.end = ++keytran.start;
- keytran.map = Vkey_translation_map;
- }
- }
- }
+ GCPRO3 (fkey.map, keytran.map, delayed_switch_frame);
+ done = keyremap_step (keybuf, bufsize, &keytran, max (t, mock_input),
+ 1, &diff, prompt);
+ UNGCPRO;
+ if (done)
+ {
+ mock_input = diff + max (t, mock_input);
+ /* Adjust the function-key-map counters. */
+ fkey.end += diff;
+ fkey.start += diff;
+
+ goto replay_sequence;
+ }
+ }
/* If KEY is not defined in any of the keymaps,
and cannot be part of a function key or translation,
keybuf[t - 1] = new_key;
mock_input = max (t, mock_input);
+ fkey.start = fkey.end = KEYMAPP (fkey.map) ? 0 : bufsize + 1;
+ keytran.start = keytran.end = KEYMAPP (keytran.map) ? 0 : bufsize + 1;
goto replay_sequence;
}
poll_suppress_count = 1;
start_polling ();
#endif
+
+#ifdef MAC_OSX
+ /* At least provide an escape route since C-g doesn't work. */
+ signal (SIGINT, interrupt_signal);
+#endif
}
/* This type's only use is in syms_of_keyboard, to initialize the
{&Qdelete_frame, "delete-frame", &Qdelete_frame},
{&Qiconify_frame, "iconify-frame", &Qiconify_frame},
{&Qmake_frame_visible, "make-frame-visible", &Qmake_frame_visible},
- {&Qselect_window, "select-window", &Qselect_window}
+ /* `select-window' should be handled just like `switch-frame'
+ in read_key_sequence. */
+ {&Qselect_window, "select-window", &Qswitch_frame}
};
void
staticpro (&Qfunction_key);
Qmouse_click = intern ("mouse-click");
staticpro (&Qmouse_click);
-#if defined(WINDOWSNT) || defined(MAC_OSX)
- Qmouse_wheel = intern ("mouse-wheel");
- staticpro (&Qmouse_wheel);
-#endif
#ifdef WINDOWSNT
Qlanguage_change = intern ("language-change");
staticpro (&Qlanguage_change);
staticpro (&button_down_location);
mouse_syms = Fmake_vector (make_number (1), Qnil);
staticpro (&mouse_syms);
+ wheel_syms = Fmake_vector (make_number (2), Qnil);
+ staticpro (&wheel_syms);
{
int i;
func_key_syms = Qnil;
staticpro (&func_key_syms);
-#if defined(WINDOWSNT) || defined(MAC_OSX)
- mouse_wheel_syms = Qnil;
- staticpro (&mouse_wheel_syms);
drag_n_drop_syms = Qnil;
staticpro (&drag_n_drop_syms);
-#endif
unread_switch_frame = Qnil;
staticpro (&unread_switch_frame);
"ignore-event");
initial_define_lispy_key (Vspecial_event_map, "make-frame-visible",
"ignore-event");
- initial_define_lispy_key (Vspecial_event_map, "select-window",
- "handle-select-window");
+ /* Handling it at such a low-level causes read_key_sequence to get
+ * confused because it doesn't realize that the current_buffer was
+ * changed by read_char.
+ *
+ * initial_define_lispy_key (Vspecial_event_map, "select-window",
+ * "handle-select-window"); */
initial_define_lispy_key (Vspecial_event_map, "save-session",
"handle-save-session");
}
+
+/* Mark the pointers in the kboard objects.
+ Called by the Fgarbage_collector. */
+void
+mark_kboards ()
+{
+ KBOARD *kb;
+ Lisp_Object *p;
+ for (kb = all_kboards; kb; kb = kb->next_kboard)
+ {
+ if (kb->kbd_macro_buffer)
+ for (p = kb->kbd_macro_buffer; p < kb->kbd_macro_ptr; p++)
+ mark_object (*p);
+ mark_object (kb->Voverriding_terminal_local_map);
+ mark_object (kb->Vlast_command);
+ mark_object (kb->Vreal_last_command);
+ mark_object (kb->Vprefix_arg);
+ mark_object (kb->Vlast_prefix_arg);
+ mark_object (kb->kbd_queue);
+ mark_object (kb->defining_kbd_macro);
+ mark_object (kb->Vlast_kbd_macro);
+ mark_object (kb->Vsystem_key_alist);
+ mark_object (kb->system_key_syms);
+ mark_object (kb->Vdefault_minibuffer_frame);
+ mark_object (kb->echo_string);
+ }
+ {
+ struct input_event *event;
+ for (event = kbd_fetch_ptr; event != kbd_store_ptr; event++)
+ {
+ if (event == kbd_buffer + KBD_BUFFER_SIZE)
+ event = kbd_buffer;
+ mark_object (event->x);
+ mark_object (event->y);
+ mark_object (event->frame_or_window);
+ mark_object (event->arg);
+ }
+ }
+}
+
+/* arch-tag: 774e34d7-6d31-42f3-8397-e079a4e4c9ca
+ (do not change this comment) */
HCoop / bpt / emacs.git / blobdiff