-With prefix arg SPECIAL, offer additional commands in a menu.
-
-\(fn &optional SPECIAL)" t nil)
-
-(autoload 'org-footnote-normalize "org-footnote" "\
-Collect the footnotes in various formats and normalize them.
-
-This finds the different sorts of footnotes allowed in Org, and
-normalizes them to the usual [N] format that is understood by the
-Org-mode exporters.
-
-When SORT-ONLY is set, only sort the footnote definitions into the
-referenced sequence.
-
-If Org is amidst an export process, EXPORT-PROPS will hold the
-export properties of the buffer.
-
-When EXPORT-PROPS is non-nil, the default action is to insert
-normalized footnotes towards the end of the pre-processing
-buffer. Some exporters (docbook, odt...) expect footnote
-definitions to be available before any references to them. Such
-exporters can let bind `org-footnote-insert-pos-for-preprocessor'
-to symbol `point-min' to achieve the desired behaviour.
-
-Additional note on `org-footnote-insert-pos-for-preprocessor':
-1. This variable has not effect when FOR-PREPROCESSOR is nil.
-2. This variable (potentially) obviates the need for extra scan
- of pre-processor buffer as witnessed in
- `org-export-docbook-get-footnotes'.
-
-\(fn &optional SORT-ONLY EXPORT-PROPS)" nil nil)
-
-;;;***
-\f
-;;;### (autoloads (org-freemind-to-org-mode org-freemind-from-org-sparse-tree
-;;;;;; org-freemind-from-org-mode org-freemind-from-org-mode-node
-;;;;;; org-freemind-show org-export-as-freemind) "org-freemind"
-;;;;;; "org/org-freemind.el" (20355 10021 546955 0))
-;;; Generated autoloads from org/org-freemind.el
-
-(autoload 'org-export-as-freemind "org-freemind" "\
-Export the current buffer as a Freemind file.
-If there is an active region, export only the region. HIDDEN is
-obsolete and does nothing. EXT-PLIST is a property list with
-external parameters overriding org-mode's default settings, but
-still inferior to file-local settings. When TO-BUFFER is
-non-nil, create a buffer with that name and export to that
-buffer. If TO-BUFFER is the symbol `string', don't leave any
-buffer behind but just return the resulting HTML as a string.
-When BODY-ONLY is set, don't produce the file header and footer,
-simply return the content of the document (all top level
-sections). When PUB-DIR is set, use this as the publishing
-directory.
-
-See `org-freemind-from-org-mode' for more information.
-
-\(fn &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil)
-
-(autoload 'org-freemind-show "org-freemind" "\
-Show file MM-FILE in Freemind.
-
-\(fn MM-FILE)" t nil)
-
-(autoload 'org-freemind-from-org-mode-node "org-freemind" "\
-Convert node at line NODE-LINE to the FreeMind file MM-FILE.
-See `org-freemind-from-org-mode' for more information.
-
-\(fn NODE-LINE MM-FILE)" t nil)
-
-(autoload 'org-freemind-from-org-mode "org-freemind" "\
-Convert the `org-mode' file ORG-FILE to the FreeMind file MM-FILE.
-All the nodes will be opened or closed in Freemind just as you
-have them in `org-mode'.
-
-Note that exporting to Freemind also gives you an alternative way
-to export from `org-mode' to html. You can create a dynamic html
-version of the your org file, by first exporting to Freemind and
-then exporting from Freemind to html. The 'As
-XHTML (JavaScript)' version in Freemind works very well (and you
-can use a CSS stylesheet to style it).
-
-\(fn ORG-FILE MM-FILE)" t nil)
-
-(autoload 'org-freemind-from-org-sparse-tree "org-freemind" "\
-Convert visible part of buffer ORG-BUFFER to FreeMind file MM-FILE.
-
-\(fn ORG-BUFFER MM-FILE)" t nil)
-
-(autoload 'org-freemind-to-org-mode "org-freemind" "\
-Convert FreeMind file MM-FILE to `org-mode' file ORG-FILE.
-
-\(fn MM-FILE ORG-FILE)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-export-htmlize-generate-css org-export-as-html
-;;;;;; org-export-region-as-html org-replace-region-by-html org-export-as-html-to-buffer
-;;;;;; org-export-as-html-batch org-export-as-html-and-open) "org-html"
-;;;;;; "org/org-html.el" (20355 10021 546955 0))
-;;; Generated autoloads from org/org-html.el
-
-(put 'org-export-html-style-include-default 'safe-local-variable 'booleanp)
-
-(put 'org-export-html-style 'safe-local-variable 'stringp)
-
-(put 'org-export-html-style-extra 'safe-local-variable 'stringp)
-
-(autoload 'org-export-as-html-and-open "org-html" "\
-Export the outline as HTML and immediately open it with a browser.
-If there is an active region, export only the region.
-The prefix ARG specifies how many levels of the outline should become
-headlines. The default is 3. Lower levels will become bulleted lists.
-
-\(fn ARG)" t nil)
-
-(autoload 'org-export-as-html-batch "org-html" "\
-Call the function `org-export-as-html'.
-This function can be used in batch processing as:
-emacs --batch
- --load=$HOME/lib/emacs/org.el
- --eval \"(setq org-export-headline-levels 2)\"
- --visit=MyFile --funcall org-export-as-html-batch
-
-\(fn)" nil nil)
-
-(autoload 'org-export-as-html-to-buffer "org-html" "\
-Call `org-export-as-html` with output to a temporary buffer.
-No file is created. The prefix ARG is passed through to `org-export-as-html'.
-
-\(fn ARG)" t nil)
-
-(autoload 'org-replace-region-by-html "org-html" "\
-Assume the current region has org-mode syntax, and convert it to HTML.
-This can be used in any buffer. For example, you could write an
-itemized list in org-mode syntax in an HTML buffer and then use this
-command to convert it.
-
-\(fn BEG END)" t nil)
-
-(autoload 'org-export-region-as-html "org-html" "\
-Convert region from BEG to END in org-mode buffer to HTML.
-If prefix arg BODY-ONLY is set, omit file header, footer, and table of
-contents, and only produce the region of converted text, useful for
-cut-and-paste operations.
-If BUFFER is a buffer or a string, use/create that buffer as a target
-of the converted HTML. If BUFFER is the symbol `string', return the
-produced HTML as a string and leave not buffer behind. For example,
-a Lisp program could call this function in the following way:
-
- (setq html (org-export-region-as-html beg end t 'string))
-
-When called interactively, the output buffer is selected, and shown
-in a window. A non-interactive call will only return the buffer.
-
-\(fn BEG END &optional BODY-ONLY BUFFER)" t nil)
-
-(autoload 'org-export-as-html "org-html" "\
-Export the outline as a pretty HTML file.
-If there is an active region, export only the region. The prefix
-ARG specifies how many levels of the outline should become
-headlines. The default is 3. Lower levels will become bulleted
-lists. HIDDEN is obsolete and does nothing.
-EXT-PLIST is a property list with external parameters overriding
-org-mode's default settings, but still inferior to file-local
-settings. When TO-BUFFER is non-nil, create a buffer with that
-name and export to that buffer. If TO-BUFFER is the symbol
-`string', don't leave any buffer behind but just return the
-resulting HTML as a string. When BODY-ONLY is set, don't produce
-the file header and footer, simply return the content of
-<body>...</body>, without even the body tags themselves. When
-PUB-DIR is set, use this as the publishing directory.
-
-\(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil)
-
-(autoload 'org-export-htmlize-generate-css "org-html" "\
-Create the CSS for all font definitions in the current Emacs session.
-Use this to create face definitions in your CSS style file that can then
-be used by code snippets transformed by htmlize.
-This command just produces a buffer that contains class definitions for all
-faces used in the current Emacs session. You can copy and paste the ones you
-need into your CSS file.
-
-If you then set `org-export-htmlize-output-type' to `css', calls to
-the function `org-export-htmlize-region-for-paste' will produce code
-that uses these same face definitions.
-
-\(fn)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-export-icalendar-combine-agenda-files org-export-icalendar-all-agenda-files
-;;;;;; org-export-icalendar-this-file) "org-icalendar" "org/org-icalendar.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-icalendar.el
-
-(autoload 'org-export-icalendar-this-file "org-icalendar" "\
-Export current file as an iCalendar file.
-The iCalendar file will be located in the same directory as the Org-mode
-file, but with extension `.ics'.
-
-\(fn)" t nil)
-
-(autoload 'org-export-icalendar-all-agenda-files "org-icalendar" "\
-Export all files in the variable `org-agenda-files' to iCalendar .ics files.
-Each iCalendar file will be located in the same directory as the Org-mode
-file, but with extension `.ics'.
-
-\(fn)" t nil)
-
-(autoload 'org-export-icalendar-combine-agenda-files "org-icalendar" "\
-Export all files in `org-agenda-files' to a single combined iCalendar file.
-The file is stored under the name `org-combined-agenda-icalendar-file'.
-
-\(fn)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-id-store-link org-id-find-id-file org-id-find
-;;;;;; org-id-goto org-id-get-with-outline-drilling org-id-get-with-outline-path-completion
-;;;;;; org-id-get org-id-copy org-id-get-create) "org-id" "org/org-id.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-id.el
-
-(autoload 'org-id-get-create "org-id" "\
-Create an ID for the current entry and return it.
-If the entry already has an ID, just return it.
-With optional argument FORCE, force the creation of a new ID.
-
-\(fn &optional FORCE)" t nil)
-
-(autoload 'org-id-copy "org-id" "\
-Copy the ID of the entry at point to the kill ring.
-Create an ID if necessary.
-
-\(fn)" t nil)
-
-(autoload 'org-id-get "org-id" "\
-Get the ID property of the entry at point-or-marker POM.
-If POM is nil, refer to the entry at point.
-If the entry does not have an ID, the function returns nil.
-However, when CREATE is non nil, create an ID if none is present already.
-PREFIX will be passed through to `org-id-new'.
-In any case, the ID of the entry is returned.
-
-\(fn &optional POM CREATE PREFIX)" nil nil)
-
-(autoload 'org-id-get-with-outline-path-completion "org-id" "\
-Use outline-path-completion to retrieve the ID of an entry.
-TARGETS may be a setting for `org-refile-targets' to define the eligible
-headlines. When omitted, all headlines in all agenda files are
-eligible.
-It returns the ID of the entry. If necessary, the ID is created.
-
-\(fn &optional TARGETS)" nil nil)
-
-(autoload 'org-id-get-with-outline-drilling "org-id" "\
-Use an outline-cycling interface to retrieve the ID of an entry.
-This only finds entries in the current buffer, using `org-get-location'.
-It returns the ID of the entry. If necessary, the ID is created.
-
-\(fn &optional TARGETS)" nil nil)
-
-(autoload 'org-id-goto "org-id" "\
-Switch to the buffer containing the entry with id ID.
-Move the cursor to that entry in that buffer.
-
-\(fn ID)" t nil)
-
-(autoload 'org-id-find "org-id" "\
-Return the location of the entry with the id ID.
-The return value is a cons cell (file-name . position), or nil
-if there is no entry with that ID.
-With optional argument MARKERP, return the position as a new marker.
-
-\(fn ID &optional MARKERP)" nil nil)
-
-(autoload 'org-id-find-id-file "org-id" "\
-Query the id database for the file in which this ID is located.
-
-\(fn ID)" nil nil)
-
-(autoload 'org-id-store-link "org-id" "\
-Store a link to the current entry, using its ID.
-
-\(fn)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-indent-mode) "org-indent" "org/org-indent.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-indent.el
-
-(autoload 'org-indent-mode "org-indent" "\
-When active, indent text according to outline structure.
-
-Internally this works by adding `line-prefix' and `wrap-prefix'
-properties, after each buffer modification, on the modified zone.
-
-The process is synchronous. Though, initial indentation of
-buffer, which can take a few seconds on large buffers, is done
-during idle time.
-
-\(fn &optional ARG)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-irc-store-link) "org-irc" "org/org-irc.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-irc.el
-
-(autoload 'org-irc-store-link "org-irc" "\
-Dispatch to the appropriate function to store a link to an IRC session.
-
-\(fn)" nil nil)
-
-;;;***
-\f
-;;;### (autoloads (org-export-as-pdf-and-open org-export-as-pdf org-export-as-latex
-;;;;;; org-export-region-as-latex org-replace-region-by-latex org-export-as-latex-to-buffer
-;;;;;; org-export-as-latex-batch) "org-latex" "org/org-latex.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-latex.el
-
-(autoload 'org-export-as-latex-batch "org-latex" "\
-Call `org-export-as-latex', may be used in batch processing.
-For example:
-
-emacs --batch
- --load=$HOME/lib/emacs/org.el
- --eval \"(setq org-export-headline-levels 2)\"
- --visit=MyFile --funcall org-export-as-latex-batch
-
-\(fn)" nil nil)
-
-(autoload 'org-export-as-latex-to-buffer "org-latex" "\
-Call `org-export-as-latex` with output to a temporary buffer.
-No file is created. The prefix ARG is passed through to `org-export-as-latex'.
-
-\(fn ARG)" t nil)
-
-(autoload 'org-replace-region-by-latex "org-latex" "\
-Replace the region from BEG to END with its LaTeX export.
-It assumes the region has `org-mode' syntax, and then convert it to
-LaTeX. This can be used in any buffer. For example, you could
-write an itemized list in `org-mode' syntax in an LaTeX buffer and
-then use this command to convert it.
-
-\(fn BEG END)" t nil)
-
-(autoload 'org-export-region-as-latex "org-latex" "\
-Convert region from BEG to END in `org-mode' buffer to LaTeX.
-If prefix arg BODY-ONLY is set, omit file header, footer, and table of
-contents, and only produce the region of converted text, useful for
-cut-and-paste operations.
-If BUFFER is a buffer or a string, use/create that buffer as a target
-of the converted LaTeX. If BUFFER is the symbol `string', return the
-produced LaTeX as a string and leave no buffer behind. For example,
-a Lisp program could call this function in the following way:
-
- (setq latex (org-export-region-as-latex beg end t 'string))
-
-When called interactively, the output buffer is selected, and shown
-in a window. A non-interactive call will only return the buffer.
-
-\(fn BEG END &optional BODY-ONLY BUFFER)" t nil)
-
-(autoload 'org-export-as-latex "org-latex" "\
-Export current buffer to a LaTeX file.
-If there is an active region, export only the region. The prefix
-ARG specifies how many levels of the outline should become
-headlines. The default is 3. Lower levels will be exported
-depending on `org-export-latex-low-levels'. The default is to
-convert them as description lists.
-HIDDEN is obsolete and does nothing.
-EXT-PLIST is a property list with
-external parameters overriding org-mode's default settings, but
-still inferior to file-local settings. When TO-BUFFER is
-non-nil, create a buffer with that name and export to that
-buffer. If TO-BUFFER is the symbol `string', don't leave any
-buffer behind but just return the resulting LaTeX as a string.
-When BODY-ONLY is set, don't produce the file header and footer,
-simply return the content of \\begin{document}...\\end{document},
-without even the \\begin{document} and \\end{document} commands.
-when PUB-DIR is set, use this as the publishing directory.
-
-\(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil)
-
-(autoload 'org-export-as-pdf "org-latex" "\
-Export as LaTeX, then process through to PDF.
-
-\(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil)
-
-(autoload 'org-export-as-pdf-and-open "org-latex" "\
-Export as LaTeX, then process through to PDF, and open.
-
-\(fn ARG)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-lparse-region org-replace-region-by org-lparse-to-buffer
-;;;;;; org-lparse-batch org-lparse-and-open) "org-lparse" "org/org-lparse.el"
-;;;;;; (20417 65331 139825 0))
-;;; Generated autoloads from org/org-lparse.el
-
-(autoload 'org-lparse-and-open "org-lparse" "\
-Export outline to TARGET-BACKEND via NATIVE-BACKEND and open exported file.
-If there is an active region, export only the region. The prefix
-ARG specifies how many levels of the outline should become
-headlines. The default is 3. Lower levels will become bulleted
-lists.
-
-\(fn TARGET-BACKEND NATIVE-BACKEND ARG &optional FILE-OR-BUF)" nil nil)
-
-(autoload 'org-lparse-batch "org-lparse" "\
-Call the function `org-lparse'.
-This function can be used in batch processing as:
-emacs --batch
- --load=$HOME/lib/emacs/org.el
- --eval \"(setq org-export-headline-levels 2)\"
- --visit=MyFile --funcall org-lparse-batch
-
-\(fn TARGET-BACKEND &optional NATIVE-BACKEND)" nil nil)
-
-(autoload 'org-lparse-to-buffer "org-lparse" "\
-Call `org-lparse' with output to a temporary buffer.
-No file is created. The prefix ARG is passed through to
-`org-lparse'.
-
-\(fn BACKEND ARG)" nil nil)
-
-(autoload 'org-replace-region-by "org-lparse" "\
-Assume the current region has org-mode syntax, and convert it to HTML.
-This can be used in any buffer. For example, you could write an
-itemized list in org-mode syntax in an HTML buffer and then use
-this command to convert it.
-
-\(fn BACKEND BEG END)" nil nil)
-
-(autoload 'org-lparse-region "org-lparse" "\
-Convert region from BEG to END in org-mode buffer to HTML.
-If prefix arg BODY-ONLY is set, omit file header, footer, and table of
-contents, and only produce the region of converted text, useful for
-cut-and-paste operations.
-If BUFFER is a buffer or a string, use/create that buffer as a target
-of the converted HTML. If BUFFER is the symbol `string', return the
-produced HTML as a string and leave not buffer behind. For example,
-a Lisp program could call this function in the following way:
-
- (setq html (org-lparse-region \"html\" beg end t 'string))
-
-When called interactively, the output buffer is selected, and shown
-in a window. A non-interactive call will only return the buffer.
-
-\(fn BACKEND BEG END &optional BODY-ONLY BUFFER)" nil nil)
-
-;;;***
-\f
-;;;### (autoloads (org-mobile-create-sumo-agenda org-mobile-pull
-;;;;;; org-mobile-push) "org-mobile" "org/org-mobile.el" (20355
-;;;;;; 10021 546955 0))
-;;; Generated autoloads from org/org-mobile.el
-
-(autoload 'org-mobile-push "org-mobile" "\
-Push the current state of Org affairs to the WebDAV directory.
-This will create the index file, copy all agenda files there, and also
-create all custom agenda views, for upload to the mobile phone.
-
-\(fn)" t nil)
-
-(autoload 'org-mobile-pull "org-mobile" "\
-Pull the contents of `org-mobile-capture-file' and integrate them.
-Apply all flagged actions, flag entries to be flagged and then call an
-agenda view showing the flagged items.
-
-\(fn)" t nil)
-
-(autoload 'org-mobile-create-sumo-agenda "org-mobile" "\
-Create a file that contains all custom agenda views.
-
-\(fn)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-export-as-odf-and-open org-export-as-odf org-export-odt-convert
-;;;;;; org-export-as-odt org-export-as-odt-batch org-export-as-odt-and-open)
-;;;;;; "org-odt" "org/org-odt.el" (20417 65331 139825 0))
-;;; Generated autoloads from org/org-odt.el
-
-(autoload 'org-export-as-odt-and-open "org-odt" "\
-Export the outline as ODT and immediately open it with a browser.
-If there is an active region, export only the region.
-The prefix ARG specifies how many levels of the outline should become
-headlines. The default is 3. Lower levels will become bulleted lists.
-
-\(fn ARG)" t nil)
-
-(autoload 'org-export-as-odt-batch "org-odt" "\
-Call the function `org-lparse-batch'.
-This function can be used in batch processing as:
-emacs --batch
- --load=$HOME/lib/emacs/org.el
- --eval \"(setq org-export-headline-levels 2)\"
- --visit=MyFile --funcall org-export-as-odt-batch
-
-\(fn)" nil nil)
-
-(autoload 'org-export-as-odt "org-odt" "\
-Export the outline as a OpenDocumentText file.
-If there is an active region, export only the region. The prefix
-ARG specifies how many levels of the outline should become
-headlines. The default is 3. Lower levels will become bulleted
-lists. HIDDEN is obsolete and does nothing.
-EXT-PLIST is a property list with external parameters overriding
-org-mode's default settings, but still inferior to file-local
-settings. When TO-BUFFER is non-nil, create a buffer with that
-name and export to that buffer. If TO-BUFFER is the symbol
-`string', don't leave any buffer behind but just return the
-resulting XML as a string. When BODY-ONLY is set, don't produce
-the file header and footer, simply return the content of
-<body>...</body>, without even the body tags themselves. When
-PUB-DIR is set, use this as the publishing directory.
-
-\(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil)
-
-(autoload 'org-export-odt-convert "org-odt" "\
-Convert IN-FILE to format OUT-FMT using a command line converter.
-IN-FILE is the file to be converted. If unspecified, it defaults
-to variable `buffer-file-name'. OUT-FMT is the desired output
-format. Use `org-export-odt-convert-process' as the converter.
-If PREFIX-ARG is non-nil then the newly converted file is opened
-using `org-open-file'.
-
-\(fn &optional IN-FILE OUT-FMT PREFIX-ARG)" t nil)
-
-(autoload 'org-export-as-odf "org-odt" "\
-Export LATEX-FRAG as OpenDocument formula file ODF-FILE.
-Use `org-create-math-formula' to convert LATEX-FRAG first to
-MathML. When invoked as an interactive command, use
-`org-latex-regexps' to infer LATEX-FRAG from currently active
-region. If no LaTeX fragments are found, prompt for it. Push
-MathML source to kill ring, if `org-export-copy-to-kill-ring' is
-non-nil.
-
-\(fn LATEX-FRAG &optional ODF-FILE)" t nil)
-
-(autoload 'org-export-as-odf-and-open "org-odt" "\
-Export LaTeX fragment as OpenDocument formula and immediately open it.
-Use `org-export-as-odf' to read LaTeX fragment and OpenDocument
-formula file.
-
-\(fn)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-plot/gnuplot) "org-plot" "org/org-plot.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-plot.el
-
-(autoload 'org-plot/gnuplot "org-plot" "\
-Plot table using gnuplot. Gnuplot options can be specified with PARAMS.
-If not given options will be taken from the +PLOT
-line directly before or after the table.
-
-\(fn &optional PARAMS)" t nil)
-
-;;;***
-\f
-;;;### (autoloads (org-publish-current-project org-publish-current-file
-;;;;;; org-publish-all org-publish) "org-publish" "org/org-publish.el"
-;;;;;; (20355 10021 546955 0))
-;;; Generated autoloads from org/org-publish.el
-
-(defalias 'org-publish-project 'org-publish)
-
-(autoload 'org-publish "org-publish" "\
-Publish PROJECT.
-
-\(fn PROJECT &optional FORCE)" t nil)
-
-(autoload 'org-publish-all "org-publish" "\
-Publish all projects.
-With prefix argument, remove all files in the timestamp
-directory and force publishing all files.
-
-\(fn &optional FORCE)" t nil)
-
-(autoload 'org-publish-current-file "org-publish" "\
-Publish the current file.
-With prefix argument, force publish the file.
-
-\(fn &optional FORCE)" t nil)
-
-(autoload 'org-publish-current-project "org-publish" "\
-Publish the project associated with the current file.
-With a prefix argument, force publishing of all files in
-the project.
-
-\(fn &optional FORCE)" t nil)