| 1 | @echo off\r |
| 2 | rem ----------------------------------------------------------------------\r |
| 3 | rem Configuration script for MSDOS\r |
| 4 | rem Copyright (C) 1994 Free Software Foundation, Inc.\r |
| 5 | \r |
| 6 | rem This file is part of GNU Emacs.\r |
| 7 | \r |
| 8 | rem GNU Emacs is free software; you can redistribute it and/or modify\r |
| 9 | rem it under the terms of the GNU General Public License as published by\r |
| 10 | rem the Free Software Foundation; either version 2, or (at your option)\r |
| 11 | rem any later version.\r |
| 12 | \r |
| 13 | rem GNU Emacs is distributed in the hope that it will be useful,\r |
| 14 | rem but WITHOUT ANY WARRANTY; without even the implied warranty of\r |
| 15 | rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r |
| 16 | rem GNU General Public License for more details.\r |
| 17 | \r |
| 18 | rem You should have received a copy of the GNU General Public License\r |
| 19 | rem along with GNU Emacs; see the file COPYING. If not, write to the\r |
| 20 | rem Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r |
| 21 | rem Boston, MA 02111-1307, USA.\r |
| 22 | rem ----------------------------------------------------------------------\r |
| 23 | rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r |
| 24 | rem\r |
| 25 | rem + msdos version 3 or better.\r |
| 26 | rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r |
| 27 | rem + make utility that allows breaking of the 128 chars limit on\r |
| 28 | rem command lines. ndmake (as of version 4.5) won't work due to a\r |
| 29 | rem line length limit. The make that comes with djgpp does work.\r |
| 30 | rem + rm and mv (from GNU file utilities).\r |
| 31 | rem + sed (you can use the port that comes with DJGPP).\r |
| 32 | rem\r |
| 33 | rem You should be able to get all the above utilities from any SimTel\r |
| 34 | rem repository, e.g. ftp.simtel.net, in the directory\r |
| 35 | rem "pub/simtelnet/gnu/djgpp/v2gnu". As usual, please use your local\r |
| 36 | rem mirroring site to reduce trans-Atlantic traffic.\r |
| 37 | rem ----------------------------------------------------------------------\r |
| 38 | set X11=\r |
| 39 | set nodebug=\r |
| 40 | set djgpp_ver=\r |
| 41 | if "%1" == "" goto usage\r |
| 42 | rem ----------------------------------------------------------------------\r |
| 43 | rem See if their environment is large enough. We need 28 bytes.\r |
| 44 | set $foo$=789012345678901234567\r |
| 45 | if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r |
| 46 | set $foo$=\r |
| 47 | :again\r |
| 48 | if "%1" == "" goto usage\r |
| 49 | if "%1" == "--with-x" goto withx\r |
| 50 | if "%1" == "--no-debug" goto nodebug\r |
| 51 | if "%1" == "msdos" goto msdos\r |
| 52 | :usage\r |
| 53 | echo Usage: config [--with-x] [--no-debug] msdos\r |
| 54 | echo [Read the script before you run it.]\r |
| 55 | goto end\r |
| 56 | rem ----------------------------------------------------------------------\r |
| 57 | :withx\r |
| 58 | set X11=Y\r |
| 59 | shift\r |
| 60 | goto again\r |
| 61 | rem ----------------------------------------------------------------------\r |
| 62 | :nodebug\r |
| 63 | set nodebug=Y\r |
| 64 | shift\r |
| 65 | goto again\r |
| 66 | rem ----------------------------------------------------------------------\r |
| 67 | :msdos\r |
| 68 | Echo Checking whether 'sed' is available...\r |
| 69 | sed -e "w junk.$$$" <Nul\r |
| 70 | If Exist junk.$$$ Goto sedOk\r |
| 71 | Echo To configure 'Emacs' you need to have 'sed'!\r |
| 72 | Goto End\r |
| 73 | :sedOk\r |
| 74 | Echo Checking whether 'rm' is available...\r |
| 75 | rm -f junk.$$$\r |
| 76 | If Not Exist junk.$$$ Goto rmOk\r |
| 77 | Echo To configure 'Emacs' you need to have 'rm'!\r |
| 78 | Goto End\r |
| 79 | :rmOk\r |
| 80 | Echo Checking whether 'mv' is available...\r |
| 81 | rm -f junk.1 junk.2\r |
| 82 | echo foo >junk.1\r |
| 83 | mv junk.1 ./junk.2\r |
| 84 | If Exist junk.2 Goto mvOk\r |
| 85 | Echo To configure 'Emacs' you need to have 'mv'!\r |
| 86 | rm -f junk.1\r |
| 87 | Goto End\r |
| 88 | :mvOk\r |
| 89 | rm -f junk.2\r |
| 90 | Echo Checking whether 'gcc' is available...\r |
| 91 | echo main(){} >junk.c\r |
| 92 | gcc -c junk.c\r |
| 93 | if exist junk.o goto gccOk\r |
| 94 | Echo To configure 'Emacs' you need to have 'gcc'!\r |
| 95 | rm -f junk.c\r |
| 96 | Goto End\r |
| 97 | :gccOk\r |
| 98 | rm -f junk.c junk.o junk junk.exe\r |
| 99 | Echo Checking what version of DJGPP is installed...\r |
| 100 | If Not "%DJGPP%" == "" goto djgppOk\r |
| 101 | Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r |
| 102 | Goto End\r |
| 103 | :djgppOk\r |
| 104 | echo int main() >junk.c\r |
| 105 | echo #ifdef __DJGPP__ >>junk.c\r |
| 106 | echo {return (__DJGPP__)*10;} >>junk.c\r |
| 107 | echo #else >>junk.c\r |
| 108 | echo #ifdef __GO32__ >>junk.c\r |
| 109 | echo {return 10;} >>junk.c\r |
| 110 | echo #else >>junk.c\r |
| 111 | echo {return 0;} >>junk.c\r |
| 112 | echo #endif >>junk.c\r |
| 113 | echo #endif >>junk.c\r |
| 114 | gcc -o junk junk.c\r |
| 115 | if not exist junk.exe coff2exe junk\r |
| 116 | junk\r |
| 117 | If ErrorLevel 10 Goto go32Ok\r |
| 118 | rm -f junk.c junk junk.exe\r |
| 119 | Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r |
| 120 | Goto End\r |
| 121 | :go32Ok\r |
| 122 | set djgpp_ver=1\r |
| 123 | If ErrorLevel 20 set djgpp_ver=2\r |
| 124 | rm -f junk.c junk junk.exe\r |
| 125 | Echo Configuring for DJGPP Version %DJGPP_VER% ...\r |
| 126 | Rem ----------------------------------------------------------------------\r |
| 127 | Echo Configuring the source directory...\r |
| 128 | cd src\r |
| 129 | \r |
| 130 | rem Create "paths.h"\r |
| 131 | sed -f ../msdos/sed4.inp <paths.in >paths.tmp\r |
| 132 | update paths.tmp paths.h >nul\r |
| 133 | rm -f paths.tmp\r |
| 134 | \r |
| 135 | rem Create "config.h"\r |
| 136 | rm -f config.h2 config.tmp\r |
| 137 | sed -e '' config.in > config.tmp\r |
| 138 | if "%X11%" == "" goto src4\r |
| 139 | sed -f ../msdos/sed2x.inp <config.in >config.tmp\r |
| 140 | :src4\r |
| 141 | sed -f ../msdos/sed2.inp <config.tmp >config.h2\r |
| 142 | update config.h2 config.h >nul\r |
| 143 | rm -f config.tmp config.h2\r |
| 144 | \r |
| 145 | rem On my system dir.h gets in the way. It's a VMS file so who cares.\r |
| 146 | if exist dir.h ren dir.h vmsdir.h\r |
| 147 | \r |
| 148 | rem Create "makefile" from "makefile.in".\r |
| 149 | rm -f Makefile junk.c\r |
| 150 | sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r |
| 151 | If "%DJGPP_VER%" == "1" Goto mfV1\r |
| 152 | gcc -E junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r |
| 153 | goto mfDone\r |
| 154 | :mfV1\r |
| 155 | gcc -E junk.c | sed -f ../msdos/sed1.inp >Makefile\r |
| 156 | :mfDone\r |
| 157 | rm -f junk.c\r |
| 158 | \r |
| 159 | if "%X11%" == "" goto src5\r |
| 160 | mv Makefile makefile.tmp\r |
| 161 | sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r |
| 162 | rm -f makefile.tmp\r |
| 163 | :src5\r |
| 164 | \r |
| 165 | if "%nodebug%" == "" goto src6\r |
| 166 | sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r |
| 167 | sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r |
| 168 | rm -f makefile.tmp\r |
| 169 | :src6\r |
| 170 | cd ..\r |
| 171 | rem ----------------------------------------------------------------------\r |
| 172 | Echo Configuring the library source directory...\r |
| 173 | cd lib-src\r |
| 174 | rem Create "makefile" from "makefile.in".\r |
| 175 | sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r |
| 176 | gcc -E -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r |
| 177 | If "%DJGPP_VER%" == "2" goto libsrc-v2\r |
| 178 | sed -f ../msdos/sed3.inp <makefile.new >Makefile\r |
| 179 | Goto libsrc2\r |
| 180 | :libsrc-v2\r |
| 181 | sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r |
| 182 | :libsrc2\r |
| 183 | rm -f makefile.new junk.c\r |
| 184 | if "%nodebug%" == "" goto libsrc3\r |
| 185 | sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r |
| 186 | sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r |
| 187 | rm -f makefile.tmp\r |
| 188 | :libsrc3\r |
| 189 | cd ..\r |
| 190 | rem ----------------------------------------------------------------------\r |
| 191 | if "%X11%" == "" goto oldx1\r |
| 192 | Echo Configuring the oldxmenu directory...\r |
| 193 | cd oldxmenu\r |
| 194 | sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r |
| 195 | if "%nodebug%" == "" goto oldx2\r |
| 196 | sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r |
| 197 | mv -f makefile.tmp Makefile\r |
| 198 | :oldx2\r |
| 199 | cd ..\r |
| 200 | :oldx1\r |
| 201 | rem ----------------------------------------------------------------------\r |
| 202 | Echo Configuring the manual directory...\r |
| 203 | cd man\r |
| 204 | sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r |
| 205 | cd ..\r |
| 206 | rem ----------------------------------------------------------------------\r |
| 207 | Echo Configuring the main directory...\r |
| 208 | If "%DJGPP_VER%" == "1" goto mainv1\r |
| 209 | Echo Looking for the GDB init file...\r |
| 210 | If not Exist src\_gdbinit If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r |
| 211 | If Exist src\_gdbinit goto gdbinitOk\r |
| 212 | Echo ERROR:\r |
| 213 | Echo I cannot find the GDB init file. It was called ".gdbinit" in\r |
| 214 | Echo the Emacs distribution, but was probably renamed to some other\r |
| 215 | Echo name without the leading dot when you untarred the archive.\r |
| 216 | Echo It should be in the "src/" subdirectory. Please make sure this\r |
| 217 | Echo file exists and is called "_gdbinit" with a leading underscore.\r |
| 218 | Echo Then run CONFIG.BAT again with the same arguments you did now.\r |
| 219 | goto End\r |
| 220 | :gdbinitOk\r |
| 221 | Echo Looking for the GDB init file...found\r |
| 222 | copy msdos\mainmake.v2 Makefile >nul\r |
| 223 | :mainv1\r |
| 224 | If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r |
| 225 | rem ----------------------------------------------------------------------\r |
| 226 | goto End\r |
| 227 | :SmallEnv\r |
| 228 | echo Your environment size is too small. Please enlarge it and run me again.\r |
| 229 | echo For example, type "command.com /e:2048" to have 2048 bytes available.\r |
| 230 | set $foo$=\r |
| 231 | :end\r |
| 232 | set X11=\r |
| 233 | set nodebug=\r |
| 234 | set djgpp_ver=\r |