| 1 | @echo off\r |
| 2 | rem ----------------------------------------------------------------------\r |
| 3 | rem Configuration script for MSDOS\r |
| 4 | rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003\r |
| 5 | rem 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.\r |
| 6 | \r |
| 7 | rem This file is part of GNU Emacs.\r |
| 8 | \r |
| 9 | rem GNU Emacs is free software: you can redistribute it and/or modify\r |
| 10 | rem it under the terms of the GNU General Public License as published by\r |
| 11 | rem the Free Software Foundation, either version 3 of the License, or\r |
| 12 | rem (at your option) any later version.\r |
| 13 | \r |
| 14 | rem GNU Emacs is distributed in the hope that it will be useful,\r |
| 15 | rem but WITHOUT ANY WARRANTY; without even the implied warranty of\r |
| 16 | rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r |
| 17 | rem GNU General Public License for more details.\r |
| 18 | \r |
| 19 | rem You should have received a copy of the GNU General Public License\r |
| 20 | rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/.\r |
| 21 | \r |
| 22 | rem ----------------------------------------------------------------------\r |
| 23 | rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r |
| 24 | rem\r |
| 25 | rem + msdos version 3 or better.\r |
| 26 | rem + DJGPP version 1.12maint1 or later (version 2.03 or later recommended).\r |
| 27 | rem + make utility that allows breaking of the 128 chars limit on\r |
| 28 | rem command lines. ndmake (as of version 4.5) won't work due to a\r |
| 29 | rem line length limit. The make that comes with DJGPP does work (and is\r |
| 30 | rem recommended).\r |
| 31 | rem + rm, mv, and cp (from GNU file utilities).\r |
| 32 | rem + sed (you can use the port that comes with DJGPP).\r |
| 33 | rem\r |
| 34 | rem You should be able to get all the above utilities from the DJGPP FTP\r |
| 35 | rem site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".\r |
| 36 | rem ----------------------------------------------------------------------\r |
| 37 | set X11=\r |
| 38 | set nodebug=\r |
| 39 | set djgpp_ver=\r |
| 40 | set sys_malloc=\r |
| 41 | if "%1" == "" goto usage\r |
| 42 | rem ----------------------------------------------------------------------\r |
| 43 | rem See if their environment is large enough. We need 28 bytes.\r |
| 44 | set $foo$=789012345678901234567\r |
| 45 | if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r |
| 46 | set $foo$=\r |
| 47 | :again\r |
| 48 | if "%1" == "" goto usage\r |
| 49 | if "%1" == "--with-x" goto withx\r |
| 50 | if "%1" == "--no-debug" goto nodebug\r |
| 51 | if "%1" == "msdos" goto msdos\r |
| 52 | if "%1" == "--with-system-malloc" goto sysmalloc\r |
| 53 | :usage\r |
| 54 | echo Usage: config [--no-debug] [--with-system-malloc] [--with-x] msdos\r |
| 55 | echo [Read the script before you run it.]\r |
| 56 | goto end\r |
| 57 | rem ----------------------------------------------------------------------\r |
| 58 | :withx\r |
| 59 | set X11=Y\r |
| 60 | shift\r |
| 61 | goto again\r |
| 62 | rem ----------------------------------------------------------------------\r |
| 63 | :nodebug\r |
| 64 | set nodebug=Y\r |
| 65 | shift\r |
| 66 | goto again\r |
| 67 | rem ----------------------------------------------------------------------\r |
| 68 | :sysmalloc\r |
| 69 | set sys_malloc=Y\r |
| 70 | shift\r |
| 71 | goto again\r |
| 72 | rem ----------------------------------------------------------------------\r |
| 73 | :msdos\r |
| 74 | Echo Checking whether 'sed' is available...\r |
| 75 | sed -e "w junk.$$$" <Nul\r |
| 76 | If Exist junk.$$$ Goto sedOk\r |
| 77 | Echo To configure 'Emacs' you need to have 'sed'!\r |
| 78 | Goto End\r |
| 79 | :sedOk\r |
| 80 | Echo Checking whether 'rm' is available...\r |
| 81 | rm -f junk.$$$\r |
| 82 | If Not Exist junk.$$$ Goto rmOk\r |
| 83 | Echo To configure 'Emacs' you need to have 'rm'!\r |
| 84 | Goto End\r |
| 85 | :rmOk\r |
| 86 | Echo Checking whether 'mv' is available...\r |
| 87 | rm -f junk.1 junk.2\r |
| 88 | echo foo >junk.1\r |
| 89 | mv junk.1 ./junk.2\r |
| 90 | If Exist junk.2 Goto mvOk\r |
| 91 | Echo To configure 'Emacs' you need to have 'mv'!\r |
| 92 | rm -f junk.1\r |
| 93 | Goto End\r |
| 94 | :mvOk\r |
| 95 | rm -f junk.2\r |
| 96 | Echo Checking whether 'gcc' is available...\r |
| 97 | echo main(){} >junk.c\r |
| 98 | gcc -c junk.c\r |
| 99 | if exist junk.o goto gccOk\r |
| 100 | Echo To configure 'Emacs' you need to have 'gcc'!\r |
| 101 | rm -f junk.c\r |
| 102 | Goto End\r |
| 103 | :gccOk\r |
| 104 | rm -f junk.c junk.o junk junk.exe\r |
| 105 | Echo Checking what version of DJGPP is installed...\r |
| 106 | If Not "%DJGPP%" == "" goto djgppOk\r |
| 107 | Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r |
| 108 | Goto End\r |
| 109 | :djgppOk\r |
| 110 | echo int main() >junk.c\r |
| 111 | echo #ifdef __DJGPP__ >>junk.c\r |
| 112 | echo {return (__DJGPP__)*10;} >>junk.c\r |
| 113 | echo #else >>junk.c\r |
| 114 | echo #ifdef __GO32__ >>junk.c\r |
| 115 | echo {return 10;} >>junk.c\r |
| 116 | echo #else >>junk.c\r |
| 117 | echo {return 0;} >>junk.c\r |
| 118 | echo #endif >>junk.c\r |
| 119 | echo #endif >>junk.c\r |
| 120 | gcc -o junk junk.c\r |
| 121 | if not exist junk.exe coff2exe junk\r |
| 122 | junk\r |
| 123 | If ErrorLevel 10 Goto go32Ok\r |
| 124 | rm -f junk.c junk junk.exe\r |
| 125 | Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r |
| 126 | Goto End\r |
| 127 | :go32Ok\r |
| 128 | set djgpp_ver=1\r |
| 129 | If ErrorLevel 20 set djgpp_ver=2\r |
| 130 | rm -f junk.c junk junk.exe\r |
| 131 | rem The v1.x build does not need djecho\r |
| 132 | if "%DJGPP_VER%" == "1" Goto djechoOk\r |
| 133 | rem DJECHO is used by the top-level Makefile in the v2.x build\r |
| 134 | Echo Checking whether 'djecho' is available...\r |
| 135 | redir -o Nul -eo djecho -o junk.$$$ foo\r |
| 136 | If Exist junk.$$$ Goto djechoOk\r |
| 137 | Echo To build 'Emacs' you need the 'djecho.exe' program!\r |
| 138 | Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r |
| 139 | Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.\r |
| 140 | Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r |
| 141 | Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r |
| 142 | Echo Then run CONFIG.BAT again with the same arguments you did now.\r |
| 143 | Goto End\r |
| 144 | :djechoOk\r |
| 145 | rm -f junk.$$$\r |
| 146 | Echo Configuring for DJGPP Version %DJGPP_VER% ...\r |
| 147 | Rem ----------------------------------------------------------------------\r |
| 148 | Echo Configuring the source directory...\r |
| 149 | cd src\r |
| 150 | \r |
| 151 | rem Create "epaths.h"\r |
| 152 | sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r |
| 153 | update epaths.tmp epaths.h >nul\r |
| 154 | rm -f epaths.tmp\r |
| 155 | \r |
| 156 | rem Create "config.h"\r |
| 157 | rm -f config.h2 config.tmp\r |
| 158 | sed -e '' config.in > config.tmp\r |
| 159 | if "%X11%" == "" goto src4\r |
| 160 | sed -f ../msdos/sed2x.inp <config.in >config.tmp\r |
| 161 | :src4\r |
| 162 | if "%DJGPP_VER%" == "2" Goto src41\r |
| 163 | sed -f ../msdos/sed2.inp <config.tmp >config.h2\r |
| 164 | goto src42\r |
| 165 | :src41\r |
| 166 | sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r |
| 167 | :src42\r |
| 168 | Rem See if DECL_ALIGN can be supported with this GCC\r |
| 169 | rm -f junk.c junk.o junk junk.exe\r |
| 170 | echo struct { int i; char *p; } __attribute__((__aligned__(8))) foo; >junk.c\r |
| 171 | rem Two percent signs because it is a special character for COMMAND.COM/CMD\r |
| 172 | rem Filter thru Sed because "&" is special for CMD.EXE\r |
| 173 | echo int main(void) { return (unsigned long)"&"foo %% 8; } | sed "s/.&./\&/" >>junk.c\r |
| 174 | gcc -o junk junk.c\r |
| 175 | if not exist junk.exe coff2exe junk\r |
| 176 | junk\r |
| 177 | If Not ErrorLevel 1 Goto alignOk\r |
| 178 | Echo WARNING: Your GCC does not support 8-byte aligned variables.\r |
| 179 | Echo WARNING: Therefore Emacs cannot support buffers larger than 128MB.\r |
| 180 | rem The following line disables DECL_ALIGN which in turn disables USE_LSB_TAG\r |
| 181 | rem For details see lisp.h where it defines USE_LSB_TAG\r |
| 182 | echo #define NO_DECL_ALIGN >>config.h2\r |
| 183 | :alignOk\r |
| 184 | Rem See if they requested a SYSTEM_MALLOC build\r |
| 185 | if "%sys_malloc%" == "" Goto cfgDone\r |
| 186 | rm -f config.tmp\r |
| 187 | ren config.h2 config.tmp\r |
| 188 | sed -f ../msdos/sedalloc.inp <config.tmp >config.h2\r |
| 189 | \r |
| 190 | :cfgDone\r |
| 191 | rm -f junk.c junk junk.exe\r |
| 192 | update config.h2 config.h >nul\r |
| 193 | rm -f config.tmp config.h2\r |
| 194 | \r |
| 195 | rem On my system dir.h gets in the way. It's a VMS file so who cares.\r |
| 196 | if exist dir.h ren dir.h vmsdir.h\r |
| 197 | \r |
| 198 | rem Create "makefile" from "makefile.in".\r |
| 199 | rm -f Makefile junk.c\r |
| 200 | sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c\r |
| 201 | If "%DJGPP_VER%" == "1" Goto mfV1\r |
| 202 | gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r |
| 203 | goto mfDone\r |
| 204 | :mfV1\r |
| 205 | gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile\r |
| 206 | :mfDone\r |
| 207 | rm -f junk.c\r |
| 208 | \r |
| 209 | if "%X11%" == "" goto src5\r |
| 210 | mv Makefile makefile.tmp\r |
| 211 | sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r |
| 212 | rm -f makefile.tmp\r |
| 213 | :src5\r |
| 214 | \r |
| 215 | if "%nodebug%" == "" goto src6\r |
| 216 | sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r |
| 217 | sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r |
| 218 | rm -f makefile.tmp\r |
| 219 | :src6\r |
| 220 | cd ..\r |
| 221 | rem ----------------------------------------------------------------------\r |
| 222 | Echo Configuring the library source directory...\r |
| 223 | cd lib-src\r |
| 224 | rem Create "makefile" from "makefile.in".\r |
| 225 | sed -e "1,/== start of cpp stuff ==/s@^#[ ].*$@@" <Makefile.in >junk.c\r |
| 226 | gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r |
| 227 | If "%DJGPP_VER%" == "2" goto libsrc-v2\r |
| 228 | sed -f ../msdos/sed3.inp <makefile.new >Makefile\r |
| 229 | Goto libsrc2\r |
| 230 | :libsrc-v2\r |
| 231 | sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r |
| 232 | :libsrc2\r |
| 233 | rm -f makefile.new junk.c\r |
| 234 | if "%nodebug%" == "" goto libsrc3\r |
| 235 | sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r |
| 236 | sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r |
| 237 | rm -f makefile.tmp\r |
| 238 | :libsrc3\r |
| 239 | cd ..\r |
| 240 | rem ----------------------------------------------------------------------\r |
| 241 | if "%X11%" == "" goto oldx1\r |
| 242 | Echo Configuring the oldxmenu directory...\r |
| 243 | cd oldxmenu\r |
| 244 | sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r |
| 245 | if "%nodebug%" == "" goto oldx2\r |
| 246 | sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r |
| 247 | mv -f makefile.tmp Makefile\r |
| 248 | :oldx2\r |
| 249 | cd ..\r |
| 250 | :oldx1\r |
| 251 | rem ----------------------------------------------------------------------\r |
| 252 | Echo Configuring the doc directory, expect one "File not found" message...\r |
| 253 | cd doc\r |
| 254 | Rem The two variants for lispintro below is for when the shell\r |
| 255 | Rem supports long file names but DJGPP does not\r |
| 256 | for %%d in (emacs lispref lispintro lispintr misc) do sed -f ../msdos/sed6.inp < %%d\Makefile.in > %%d\Makefile\r |
| 257 | cd ..\r |
| 258 | rem ----------------------------------------------------------------------\r |
| 259 | Echo Configuring the lisp directory...\r |
| 260 | cd lisp\r |
| 261 | sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r |
| 262 | cd ..\r |
| 263 | rem ----------------------------------------------------------------------\r |
| 264 | If not Exist leim\quail\latin-pre.el goto maindir\r |
| 265 | Echo Configuring the leim directory...\r |
| 266 | cd leim\r |
| 267 | sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r |
| 268 | cd ..\r |
| 269 | rem ----------------------------------------------------------------------\r |
| 270 | :maindir\r |
| 271 | Echo Configuring the main directory...\r |
| 272 | If Exist .dir-locals.el update .dir-locals.el _dir-locals.el\r |
| 273 | If "%DJGPP_VER%" == "1" goto mainv1\r |
| 274 | Echo Looking for the GDB init file...\r |
| 275 | If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r |
| 276 | If Exist src\_gdbinit goto gdbinitOk\r |
| 277 | Echo ERROR:\r |
| 278 | Echo I cannot find the GDB init file. It was called ".gdbinit" in\r |
| 279 | Echo the Emacs distribution, but was probably renamed to some other\r |
| 280 | Echo name without the leading dot when you untarred the archive.\r |
| 281 | Echo It should be in the "src/" subdirectory. Please make sure this\r |
| 282 | Echo file exists and is called "_gdbinit" with a leading underscore.\r |
| 283 | Echo Then run CONFIG.BAT again with the same arguments you did now.\r |
| 284 | goto End\r |
| 285 | :gdbinitOk\r |
| 286 | Echo Looking for the GDB init file...found\r |
| 287 | copy msdos\mainmake.v2 Makefile >nul\r |
| 288 | :mainv1\r |
| 289 | If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r |
| 290 | rem ----------------------------------------------------------------------\r |
| 291 | goto End\r |
| 292 | :SmallEnv\r |
| 293 | echo Your environment size is too small. Please enlarge it and run me again.\r |
| 294 | echo For example, type "command.com /e:2048" to have 2048 bytes available.\r |
| 295 | set $foo$=\r |
| 296 | :end\r |
| 297 | set X11=\r |
| 298 | set nodebug=\r |
| 299 | set djgpp_ver=\r |
| 300 | set sys_malloc=\r |
| 301 | \r |
| 302 | goto skipArchTag\r |
| 303 | arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33\r |
| 304 | :skipArchTag\r |