| 1 | GNU Emacs Installation Guide |
| 2 | Copyright (c) 1992, 1994 Free software Foundation, Inc. |
| 3 | |
| 4 | Permission is granted to anyone to make or distribute verbatim copies |
| 5 | of this document as received, in any medium, provided that the |
| 6 | copyright notice and permission notice are preserved, |
| 7 | and that the distributor grants the recipient permission |
| 8 | for further redistribution as permitted by this notice. |
| 9 | |
| 10 | Permission is granted to distribute modified versions |
| 11 | of this document, or of portions of it, |
| 12 | under the above conditions, provided also that they |
| 13 | carry prominent notices stating who last changed them, |
| 14 | and that any new or changed statements about the activities |
| 15 | of the Free Software Foundation are approved by the Foundation. |
| 16 | |
| 17 | |
| 18 | BUILDING AND INSTALLATION: |
| 19 | (This is for a Unix or Unix-like system. For MSDOS, see below; |
| 20 | search for MSDOG. For Windows NT, see the file nt/INSTALL.) |
| 21 | |
| 22 | 1) Make sure your system has enough swapping space allocated to handle |
| 23 | a program whose pure code is 900k bytes and whose data area is at |
| 24 | least 400k and can reach 8Mb or more. If the swapping space is |
| 25 | insufficient, you will get an error in the command `temacs -batch -l |
| 26 | loadup dump', found in `./src/Makefile.in', or possibly when |
| 27 | running the final dumped Emacs. |
| 28 | |
| 29 | Building Emacs requires about 70 Mb of disk space (including the Emacs |
| 30 | sources). Once installed, Emacs occupies about 35 Mb in the file |
| 31 | system where it is installed; this includes the executable files, Lisp |
| 32 | libraries, miscellaneous data files, and on-line documentation. If |
| 33 | the building and installation take place in different directories, |
| 34 | then the installation procedure momentarily requires 70+35 Mb. |
| 35 | |
| 36 | 2) Consult `./etc/MACHINES' to see what configuration name you should |
| 37 | give to the `configure' program. That file offers hints for |
| 38 | getting around some possible installation problems. |
| 39 | |
| 40 | 3) In the top directory of the Emacs distribution, run the program |
| 41 | `configure' as follows: |
| 42 | |
| 43 | ./configure CONFIGURATION-NAME [--OPTION[=VALUE]] ... |
| 44 | |
| 45 | The CONFIGURATION-NAME argument should be a configuration name given |
| 46 | in `./etc/MACHINES'. If omitted, `configure' will try to guess your |
| 47 | system type; if it cannot, you must find the appropriate configuration |
| 48 | name in `./etc/MACHINES' and specify it explicitly. |
| 49 | |
| 50 | If you don't want X support, specify `--with-x=no'. If you omit this |
| 51 | option, `configure' will try to figure out for itself whether your |
| 52 | system has X, and arrange to use it if present. |
| 53 | |
| 54 | The `--x-includes=DIR' and `--x-libraries=DIR' options tell the build |
| 55 | process where the compiler should look for the include files and |
| 56 | object libraries used with the X Window System. Normally, `configure' |
| 57 | is able to find them; these options are necessary if you have your X |
| 58 | Window System files installed in unusual places. These options also |
| 59 | accept a list of directories, separated with colons. |
| 60 | |
| 61 | To get more attractive menus, you can specify an X toolkit when you |
| 62 | configure Emacs; use the option `--with-x-toolkit=TOOLKIT', where |
| 63 | TOOLKIT is `athena' or `motif' (`yes' and `lucid' are synonyms for |
| 64 | `athena'). On some systems, it does not work to use a toolkit with |
| 65 | shared libraries. |
| 66 | |
| 67 | The `--with-gcc' option specifies that the build process should |
| 68 | compile Emacs using GCC. If you don't want to use GCC, specify |
| 69 | `--with-gcc=no'. If you omit this option, `configure' will search |
| 70 | for GCC in your path, and use it if present. |
| 71 | |
| 72 | You can build Emacs for several different machine types from a single |
| 73 | source directory. To do this, you must use a version of `make' that |
| 74 | supports the `VPATH' variable, such as GNU `make'. Make separate |
| 75 | build directories for the different configuration types, and in each |
| 76 | one, run the Emacs `configure' script. `configure' looks for the |
| 77 | Emacs source code in the directory that `configure' is in. |
| 78 | |
| 79 | The `--prefix=PREFIXDIR' option specifies where the installation process |
| 80 | should put emacs and its data files. This defaults to `/usr/local'. |
| 81 | - Emacs (and the other utilities users run) go in PREFIXDIR/bin |
| 82 | (unless the `--exec-prefix' option says otherwise). |
| 83 | - The architecture-independent files go in PREFIXDIR/share/emacs/VERSION |
| 84 | (where VERSION is the version number of Emacs, like `19.27'). |
| 85 | - The architecture-dependent files go in |
| 86 | PREFIXDIR/libexec/emacs/VERSION/CONFIGURATION |
| 87 | (where CONFIGURATION is the configuration name, like mips-dec-ultrix4.2), |
| 88 | unless the `--exec-prefix' option says otherwise. |
| 89 | |
| 90 | The `--exec-prefix=EXECDIR' option allows you to specify a separate |
| 91 | portion of the directory tree for installing architecture-specific |
| 92 | files, like executables and utility programs. If specified, |
| 93 | - Emacs (and the other utilities users run) go in EXECDIR/bin, and |
| 94 | - The architecture-dependent files go in |
| 95 | EXECDIR/libexec/emacs/VERSION/CONFIGURATION. |
| 96 | EXECDIR/bin should be a directory that is normally in users' PATHs. |
| 97 | |
| 98 | For example, the command |
| 99 | |
| 100 | ./configure mips-dec-ultrix --with-x11 |
| 101 | |
| 102 | configures Emacs to build for a DECstation running Ultrix, with |
| 103 | support for the X11 window system. |
| 104 | |
| 105 | `configure' doesn't do any compilation or installation |
| 106 | itself. It just creates the files that influence those things: |
| 107 | `./Makefile', `lib-src/Makefile', `oldXMenu/Makefile', |
| 108 | `lwlib/Makefile', `src/Makefile', and `./src/config.h'. For details |
| 109 | on exactly what it does, see the section called `CONFIGURATION BY |
| 110 | HAND', below. |
| 111 | |
| 112 | When it is done, `configure' prints a description of what it did and |
| 113 | creates a shell script `config.status' which, when run, recreates the |
| 114 | same configuration. If `configure' exits with an error after |
| 115 | disturbing the status quo, it removes `config.status'. `configure' |
| 116 | also creates a file `config.cache' that saves the results of its tests |
| 117 | to make reconfiguring faster, and a file `config.log' containing compiler |
| 118 | output (useful mainly for debugging `configure'). You can give |
| 119 | `configure' the option `--cache-file=FILE' to use the results of the |
| 120 | tests in FILE instead of `config.cache'. Set FILE to `/dev/null' to |
| 121 | disable caching, for debugging `configure'. |
| 122 | |
| 123 | The work of `configure' can be done by editing various files in the |
| 124 | distribution, but using `configure' is supposed to be simpler. See |
| 125 | the section called "CONFIGURATION BY HAND" below if you want to do the |
| 126 | configuration yourself. |
| 127 | |
| 128 | 4) Look at `./lisp/paths.el'; if some of those values are not right |
| 129 | for your system, set up the file `./lisp/site-init.el' with Emacs |
| 130 | Lisp code to override them; it is not a good idea to edit paths.el |
| 131 | itself. YOU MUST USE THE LISP FUNCTION `setq' TO ASSIGN VALUES, |
| 132 | rather than `defvar', as used by `./lisp/paths.el'. For example, |
| 133 | |
| 134 | (setq news-inews-program "/usr/bin/inews") |
| 135 | |
| 136 | is how you would override the default value of the variable |
| 137 | news-inews-program (which is "/usr/local/inews"). |
| 138 | |
| 139 | Before you override a variable this way, *look at the value* that the |
| 140 | variable gets by default! Make sure you know what kind of value the |
| 141 | variable should have. If you don't pay attention to what you are |
| 142 | doing, you'll make a mistake. |
| 143 | |
| 144 | 5) Put into `./lisp/site-init.el' or `./lisp/site-load.el' any Emacs |
| 145 | Lisp code you want Emacs to load before it is dumped out. Use |
| 146 | site-load.el for additional libraries if you arrange for their |
| 147 | documentation strings to be in the etc/DOC file (see |
| 148 | src/Makefile.in if you wish to figure out how to do that). For all |
| 149 | else, use site-init.el. |
| 150 | |
| 151 | If you set load-path to a different value in site-init.el or |
| 152 | site-load.el, Emacs will use *precisely* that value when it starts up |
| 153 | again. If you do this, you are on your own! |
| 154 | |
| 155 | Note that, on some systems, the code you place in site-init.el must |
| 156 | not use expand-file-name or any other function which may look |
| 157 | something up in the system's password and user information database. |
| 158 | See `./PROBLEMS' for more details on which systems this affects. |
| 159 | |
| 160 | The `site-*.el' files are nonexistent in the distribution. You do not |
| 161 | need to create them if you have nothing to put in them. |
| 162 | |
| 163 | 6) Refer to the file `./etc/TERMS' for information on fields you may |
| 164 | wish to add to various termcap entries. The files `./etc/termcap.ucb' |
| 165 | and `./etc/termcap.dat' may already contain appropriately-modified |
| 166 | entries. |
| 167 | |
| 168 | 7) Run `make' in the top directory of the Emacs distribution to finish |
| 169 | building Emacs in the standard way. The final executable file is |
| 170 | named `src/emacs'. You can execute this file "in place" without |
| 171 | copying it, if you wish; then it automatically uses the sibling |
| 172 | directories ../lisp, ../lib-src, ../info. |
| 173 | |
| 174 | Or you can "install" the executable and the other Emacs into their |
| 175 | installed locations, with `make install'. By default, Emacs's files |
| 176 | are installed in the following directories: |
| 177 | |
| 178 | `/usr/local/bin' holds the executable programs users normally run - |
| 179 | `emacs', `etags', `ctags', `b2m', `emacsclient', |
| 180 | and `rcs-checkin'. |
| 181 | |
| 182 | `/usr/local/share/emacs/VERSION/lisp' holds the Emacs Lisp library; |
| 183 | `VERSION' stands for the number of the Emacs version |
| 184 | you are installing, like `18.59' or `19.27'. Since the |
| 185 | Lisp library changes from one version of Emacs to |
| 186 | another, including the version number in the path |
| 187 | allows you to have several versions of Emacs installed |
| 188 | at the same time; in particular, you don't have to |
| 189 | make Emacs unavailable while installing a new version. |
| 190 | |
| 191 | `/usr/local/share/emacs/VERSION/site-lisp' holds the local Emacs Lisp |
| 192 | files installed for Emacs version VERSION only. |
| 193 | |
| 194 | `/usr/local/share/emacs/site-lisp' holds the local Emacs Lisp |
| 195 | files installed for all Emacs versions. |
| 196 | |
| 197 | When Emacs is installed, it searches for its Lisp files |
| 198 | in `/usr/local/share/emacs/VERSION/site-lisp', then in |
| 199 | `/usr/local/share/emacs/site-lisp', and finally in |
| 200 | `/usr/local/share/emacs/VERSION/lisp'. |
| 201 | |
| 202 | `/usr/local/share/emacs/VERSION/etc' holds the Emacs tutorial, the DOC |
| 203 | file, the `yow' database, and other |
| 204 | architecture-independent files Emacs might need while |
| 205 | running. VERSION is as specified for `.../lisp'. |
| 206 | |
| 207 | `/usr/local/com/emacs/lock' contains files indicating who is editing |
| 208 | what, so Emacs can detect editing clashes between |
| 209 | users. |
| 210 | |
| 211 | `/usr/local/libexec/emacs/VERSION/CONFIGURATION-NAME' contains executable |
| 212 | programs used by Emacs that users are not expected to |
| 213 | run themselves. |
| 214 | `VERSION' is the number of the Emacs version you are |
| 215 | installing, and `CONFIGURATION-NAME' is the argument |
| 216 | you gave to the `configure' program to identify the |
| 217 | architecture and operating system of your machine, |
| 218 | like `mips-dec-ultrix' or `sparc-sun-sunos'. Since |
| 219 | these files are specific to the version of Emacs, |
| 220 | operating system, and architecture in use, including |
| 221 | the configuration name in the path allows you to have |
| 222 | several versions of Emacs for any mix of machines and |
| 223 | operating systems installed at the same time; this is |
| 224 | useful for sites at which different kinds of machines |
| 225 | share the file system Emacs is installed on. |
| 226 | |
| 227 | `/usr/local/info' holds the on-line documentation for Emacs, known as |
| 228 | "info files". Many other GNU programs are documented |
| 229 | using info files as well, so this directory stands |
| 230 | apart from the other, Emacs-specific directories. |
| 231 | |
| 232 | `/usr/local/man/man1' holds the man pages for the programs installed |
| 233 | in `/usr/local/bin'. |
| 234 | |
| 235 | If these directories are not what you want, you can specify where to |
| 236 | install Emacs's libraries and data files or where Emacs should search |
| 237 | for its Lisp files by giving values for `make' variables as part of |
| 238 | the command. See the section below called `MAKE VARIABLES' for more |
| 239 | information on this. |
| 240 | |
| 241 | 8) Check the file `dir' in your site's info directory (usually |
| 242 | /usr/local/info) to make sure that it has a menu entry for the Emacs |
| 243 | info files. |
| 244 | |
| 245 | 9) If your system uses lock files to interlock access to mailer inbox files, |
| 246 | then you might need to make the movemail program setuid or setgid |
| 247 | to enable it to write the lock files. We believe this is safe. |
| 248 | |
| 249 | 10) You are done! You can remove executables and object files from |
| 250 | the build directory by typing `make clean'. To also remove the files |
| 251 | that `configure' created (so you can compile Emacs for a different |
| 252 | configuration), type `make distclean'. |
| 253 | |
| 254 | |
| 255 | |
| 256 | MAKE VARIABLES |
| 257 | |
| 258 | You can change where the build process installs Emacs and its data |
| 259 | files by specifying values for `make' variables as part of the `make' |
| 260 | command line. For example, if you type |
| 261 | |
| 262 | make install bindir=/usr/local/gnubin |
| 263 | |
| 264 | the `bindir=/usr/local/gnubin' argument indicates that the Emacs |
| 265 | executable files should go in `/usr/local/gnubin', not |
| 266 | `/usr/local/bin'. |
| 267 | |
| 268 | Here is a complete list of the variables you may want to set. |
| 269 | |
| 270 | `bindir' indicates where to put executable programs that users can |
| 271 | run. This defaults to /usr/local/bin. |
| 272 | |
| 273 | `datadir' indicates where to put the architecture-independent |
| 274 | read-only data files that Emacs refers to while it runs; it |
| 275 | defaults to /usr/local/share. We create the following |
| 276 | subdirectories under `datadir': |
| 277 | - `emacs/VERSION/lisp', containing the Emacs Lisp library, and |
| 278 | - `emacs/VERSION/etc', containing the Emacs tutorial, the DOC |
| 279 | file, and the `yow' database. |
| 280 | `VERSION' is the number of the Emacs version you are installing, |
| 281 | like `18.59' or `19.0'. Since these files vary from one version |
| 282 | of Emacs to another, including the version number in the path |
| 283 | allows you to have several versions of Emacs installed at the |
| 284 | same time; this means that you don't have to make Emacs |
| 285 | unavailable while installing a new version. |
| 286 | |
| 287 | `sharedstatedir' indicates where to put architecture-independent data files |
| 288 | that Emacs modifies while it runs; it defaults to |
| 289 | /usr/local/com. We create the following |
| 290 | subdirectories under `sharedstatedir': |
| 291 | - `emacs/lock', containing files indicating who is editing |
| 292 | what, so Emacs can detect editing clashes between |
| 293 | users. |
| 294 | |
| 295 | `libexecdir' indicates where to put architecture-specific data files that |
| 296 | Emacs refers to as it runs; it defaults to `/usr/local/libexec'. |
| 297 | We create the following subdirectories under `libexecdir': |
| 298 | - `emacs/VERSION/CONFIGURATION-NAME', containing executable |
| 299 | programs used by Emacs that users are not expected to run |
| 300 | themselves. |
| 301 | `VERSION' is the number of the Emacs version you are installing, |
| 302 | and `CONFIGURATION-NAME' is the argument you gave to the |
| 303 | `configure' program to identify the architecture and operating |
| 304 | system of your machine, like `mips-dec-ultrix' or |
| 305 | `sparc-sun-sunos'. Since these files are specific to the version |
| 306 | of Emacs, operating system, and architecture in use, including |
| 307 | the configuration name in the path allows you to have several |
| 308 | versions of Emacs for any mix of machines and operating systems |
| 309 | installed at the same time; this is useful for sites at which |
| 310 | different kinds of machines share the file system Emacs is |
| 311 | installed on. |
| 312 | |
| 313 | `infodir' indicates where to put the info files distributed with |
| 314 | Emacs; it defaults to `/usr/local/info'. |
| 315 | |
| 316 | `mandir' indicates where to put the man pages for Emacs and its |
| 317 | utilities (like `etags'); it defaults to |
| 318 | `/usr/local/man/man1'. |
| 319 | |
| 320 | `manext' gives the extension the man pages should be installed with. |
| 321 | It should contain a period, followed by the appropriate |
| 322 | digit. It defaults to `.1'. For example given the default |
| 323 | values for `mandir' and `manext', the Emacs man page would be |
| 324 | installed as `/usr/local/man/man1/emacs.1'. |
| 325 | |
| 326 | `prefix' doesn't give a path for any specific part of Emacs; instead, |
| 327 | its value is used to determine the defaults for all the |
| 328 | architecture-independent path variables - `datadir', |
| 329 | `sharedstatedir', `infodir', and `mandir'. Its default value is |
| 330 | `/usr/local'; the other variables add on `lib' or `man' to it |
| 331 | by default. |
| 332 | |
| 333 | For example, suppose your site generally places GNU software |
| 334 | under `/usr/users/software/gnusoft' instead of `/usr/local'. |
| 335 | By including |
| 336 | `prefix=/usr/users/software/gnusoft' |
| 337 | in the arguments to `make', you can instruct the build process |
| 338 | to place all of the Emacs data files in the appropriate |
| 339 | directories under that path. |
| 340 | |
| 341 | `exec_prefix' serves the same purpose as `prefix', but instead |
| 342 | determines the default values for the architecture-dependent |
| 343 | path variables - `bindir' and `libexecdir'. |
| 344 | |
| 345 | The above variables serve analogous purposes in the makefiles for all |
| 346 | GNU software; here are some variables specific to Emacs. |
| 347 | |
| 348 | `lispdir' indicates where Emacs installs and expects its Lisp library. |
| 349 | Its default value, based on `datadir' (see above), is |
| 350 | `/usr/local/share/emacs/VERSION/lisp' (where `VERSION' is as |
| 351 | described above). |
| 352 | |
| 353 | `locallisppath' indicates where Emacs should search for Lisp files |
| 354 | specific to your site. It should be a colon-separated list of |
| 355 | directories; Emacs checks them in order before checking |
| 356 | `lispdir'. Its default value, based on `datadir' (see above), is |
| 357 | `/usr/local/share/emacs/VERSION/site-lisp:/usr/local/share/emacs/site-lisp'. |
| 358 | |
| 359 | `lisppath' is the complete list of directories Emacs should search for |
| 360 | its Lisp files; its default value is the concatenation of |
| 361 | `locallisppath' and `lispdir'. It should be a colon-separated |
| 362 | list of directories; Emacs checks them in the order they |
| 363 | appear. |
| 364 | |
| 365 | `etcdir' indicates where Emacs should install and expect the rest of |
| 366 | its architecture-independent data, like the tutorial, DOC |
| 367 | file, and yow database. Its default value, based on `datadir' |
| 368 | (which see), is `/usr/local/share/emacs/VERSION/etc'. |
| 369 | |
| 370 | `lockdir' indicates the directory where Emacs keeps track of its |
| 371 | locking information. Its default value, based on |
| 372 | `sharedstatedir' (which see), is `/usr/local/com/emacs/lock'. |
| 373 | |
| 374 | `archlibdir' indicates where Emacs installs and expects the executable |
| 375 | files and other architecture-dependent data it uses while |
| 376 | running. Its default value, based on `libexecdir' (which |
| 377 | see), is `/usr/local/libexec/emacs/VERSION/CONFIGURATION-NAME' |
| 378 | (where VERSION and CONFIGURATION-NAME are as described above). |
| 379 | |
| 380 | Remember that you must specify any variable values you need each time |
| 381 | you run `make' in the top directory. If you run `make' once to build |
| 382 | emacs, test it, and then run `make' again to install the files, you |
| 383 | must provide the same variable settings each time. To make the |
| 384 | settings persist, you can edit them into the `Makefile' in the top |
| 385 | directory, but be aware that running the `configure' program erases |
| 386 | `Makefile' and rebuilds it from `Makefile.in'. |
| 387 | |
| 388 | The top-level Makefile stores the variable settings it used in the |
| 389 | Makefiles for the subdirectories, so you don't have to specify them |
| 390 | when running make in the subdirectories. |
| 391 | |
| 392 | |
| 393 | CONFIGURATION BY HAND |
| 394 | |
| 395 | Instead of running the `configure' program, you have to perform the |
| 396 | following steps. |
| 397 | |
| 398 | 1) Copy `./src/config.in' to `./src/config.h'. |
| 399 | |
| 400 | 2) Consult `./etc/MACHINES' to see what configuration name you should |
| 401 | use for your system. Look at the code of the `configure' script to |
| 402 | see which operating system and architecture description files from |
| 403 | `src/s' and `src/m' should be used for that configuration name. Edit |
| 404 | `src/config.h', and change the two `#include' directives to include |
| 405 | the appropriate system and architecture description files. |
| 406 | |
| 407 | 2) Edit `./src/config.h' to set the right options for your system. If |
| 408 | you need to override any of the definitions in the s/*.h and m/*.h |
| 409 | files for your system and machine, do so by editing config.h, not by |
| 410 | changing the s/*.h and m/*.h files. Occasionally you may need to |
| 411 | redefine parameters used in `./lib-src/movemail.c'. |
| 412 | |
| 413 | 3) Create src/Makefile and lib-src/Makefile from the corresponding |
| 414 | `Makefile.in' files. First copy `Makefile.in' to `Makefile.c', |
| 415 | then edit in appropriate substitutions for the @...@ constructs, |
| 416 | and then copy the shell commands near the end of `configure' |
| 417 | that run cpp to construct `Makefile'. |
| 418 | |
| 419 | 4) Create `Makefile' files in various other directories |
| 420 | from the corresponding `Makefile.in' files. This isn't so hard, |
| 421 | just a matter of substitution. |
| 422 | |
| 423 | The `configure' script is built from `configure.in' by the `autoconf' |
| 424 | program. You need version 2.0 or newer of `autoconf' to rebuild `configure'. |
| 425 | |
| 426 | BUILDING GNU EMACS BY HAND |
| 427 | |
| 428 | Once Emacs is configured, running `make' in the top directory performs |
| 429 | the following steps. |
| 430 | |
| 431 | 1) Run `make src/paths.h' in the top directory. This produces |
| 432 | `./src/paths.h' from the template file `./src/paths.in', changing |
| 433 | the paths to the values specified in `./Makefile'. |
| 434 | |
| 435 | 2) Go to directory `./lib-src' and run `make'. This creates |
| 436 | executables named `ctags' and `etags' and `wakeup' and `make-docfile' |
| 437 | and `digest-doc' and `test-distrib'. And others. |
| 438 | |
| 439 | 3) Go to directory `./src' and Run `make'. This refers to files in |
| 440 | the `./lisp' and `./lib-src' subdirectories using names `../lisp' and |
| 441 | `../lib-src'. |
| 442 | |
| 443 | This creates a file `./src/emacs' which is the runnable Emacs, |
| 444 | which has another name that contains a version number. |
| 445 | Each time you do this, that version number increments in the last place. |
| 446 | |
| 447 | It also creates a file in `./etc' whose name is `DOC' followed by the |
| 448 | current Emacs version. This file contains documentation strings for |
| 449 | all the functions in Emacs. Each time you run make to make a new |
| 450 | emacs, a new DOC file with a new name is made. You must keep the DOC |
| 451 | file for an Emacs version as long as you keep using that Emacs |
| 452 | version. |
| 453 | |
| 454 | |
| 455 | INSTALLATION BY HAND |
| 456 | |
| 457 | The steps below are done by running `make install' in the main |
| 458 | directory of the Emacs distribution. |
| 459 | |
| 460 | 1) Copy `./lisp' and its subdirectories, `./etc', and the executables |
| 461 | in `./lib-src' to their final destinations, as selected in `./src/paths.h'. |
| 462 | |
| 463 | Strictly speaking, not all of the executables in `./lib-src' need be copied. |
| 464 | - The programs `cvtmail', `emacsserver', `fakemail', `hexl', |
| 465 | `movemail', `profile', `rcs2log', `timer', `vcdiff', `wakeup', |
| 466 | and `yow' are used by Emacs; they do need to be copied. |
| 467 | - The programs `etags', `ctags', `emacsclient', `b2m', and `rcs-checkin' |
| 468 | are intended to be run by users; they are handled below. |
| 469 | - The programs `make-docfile' and `test-distrib' were |
| 470 | used in building Emacs, and are not needed any more. |
| 471 | - The programs `digest-doc' and `sorted-doc' convert a `DOC' file into |
| 472 | a file for users to read. There is no important reason to move them. |
| 473 | |
| 474 | 2) Copy the files in `./info' to the place specified in |
| 475 | `./lisp/site-init.el' or `./lisp/paths.el'. Note that if the |
| 476 | destination directory already contains a file named `dir', you |
| 477 | probably don't want to replace it with the `dir' file in the Emacs |
| 478 | distribution. Instead, you should make sure that the existing `dir' |
| 479 | file contains an appropriate menu entry for the Emacs info. |
| 480 | |
| 481 | 3) Create a directory for Emacs to use for clash detection, named as |
| 482 | indicated by the PATH_LOCK macro in `./src/paths.h'. |
| 483 | |
| 484 | 4) Copy `./src/emacs' to `/usr/local/bin', or to some other directory |
| 485 | in users' search paths. `./src/emacs' has an alternate name |
| 486 | `./src/emacs-EMACSVERSION'; you may wish to make a symbolic link named |
| 487 | `/usr/local/bin/emacs' pointing to that alternate name, as an easy way |
| 488 | of installing different versions. |
| 489 | |
| 490 | You can delete `./src/temacs'. |
| 491 | |
| 492 | 5) Copy the programs `b2m', `emacsclient', `ctags', `etags', and |
| 493 | `rcs-checkin' from `./lib-src' to `/usr/local/bin'. These programs are |
| 494 | intended for users to run. |
| 495 | |
| 496 | 6) Copy the man pages in `./etc' for emacs, ctags, and etags into the |
| 497 | appropriate man directories. |
| 498 | |
| 499 | 7) The files in the `./src' subdirectory, except for `emacs', are not |
| 500 | used by Emacs once it is built. However, it is very desirable to keep |
| 501 | the source on line for debugging. |
| 502 | |
| 503 | |
| 504 | PROBLEMS |
| 505 | |
| 506 | See the file PROBLEMS in this directory for a list of various |
| 507 | problems sometimes encountered, and what to do about them. |
| 508 | |
| 509 | |
| 510 | Installation on MSDOG (a.k.a. MSDOS) |
| 511 | |
| 512 | To install on MSDOG, you need to have the GNU C compiler for MSDOG |
| 513 | (also known as djgpp version 1), GNU Make, rm, mv, chmod, and sed. |
| 514 | Version 2 of djgpp (to be released soon) is not yet supported. See the |
| 515 | remarks in config.bat for more information about locations and versions. |
| 516 | |
| 517 | Some users report that running Emacs 19.29 requires dpmi memory |
| 518 | management. We do not know why this is so, since 19.28 did not need |
| 519 | it. If we find out what change introduced this requirement, we will |
| 520 | try to eliminate it. It is possible that this problem happens only |
| 521 | when there is not enough physical memory on the machine. |
| 522 | |
| 523 | You can find out if you have a dpmi host by running go32 (part of |
| 524 | djgpp) without arguments; it will tell you if it uses dpmi memory. |
| 525 | For more information about dpmi memory, consult the djgpp FAQ. |
| 526 | |
| 527 | To build and install Emacs, type these commands: |
| 528 | |
| 529 | config msdos |
| 530 | make install |
| 531 | |
| 532 | You may need to work around a type conflict between gmalloc.c and the |
| 533 | header file djgppstd.h regarding declarations of memalign and valloc. |
| 534 | Temporarily deleting those declarations from djgppstd.h while compiling |
| 535 | Emacs or while compiling gmalloc.c should do it. We found out about this |
| 536 | problem too late to include a more convenient fix--sorry. |
| 537 | |
| 538 | To save disk space, Emacs is built with the idea that you will execute |
| 539 | it from the same place in the file system where you built it. As the |
| 540 | /usr/local/ subtree does not exist on most MSDOG systems, the |
| 541 | executables might be placed in /emacs/bin/, for instance, in which |
| 542 | case there should also be /emacs/lisp, /emacs/info and /emacs/etc |
| 543 | directories. In general, with the default path handling, the etc/, |
| 544 | info/ and lisp/ directories are expected to exist in ../ relative to |
| 545 | the directory containing the executing binary. This behaviour can be |
| 546 | overridden by setting the HOME environment variable to the directory |
| 547 | containing lisp/ etc. |
| 548 | |
| 549 | MSDOG is a not a multitasking operating system, so Emacs features such |
| 550 | as asynchronous subprocesses that depend on multitasking will not |
| 551 | work. Synchronous subprocesses do work. |