| 1 | /* Asynchronous subprocess control for GNU Emacs. |
| 2 | |
| 3 | Copyright (C) 1985-1988, 1993-1996, 1998-1999, 2001-2014 |
| 4 | Free Software Foundation, Inc. |
| 5 | |
| 6 | This file is part of GNU Emacs. |
| 7 | |
| 8 | GNU Emacs is free software: you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation, either version 3 of the License, or |
| 11 | (at your option) any later version. |
| 12 | |
| 13 | GNU Emacs is distributed in the hope that it will be useful, |
| 14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | GNU General Public License for more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ |
| 20 | |
| 21 | |
| 22 | #include <config.h> |
| 23 | |
| 24 | #include <stdio.h> |
| 25 | #include <errno.h> |
| 26 | #include <sys/types.h> /* Some typedefs are used in sys/file.h. */ |
| 27 | #include <sys/file.h> |
| 28 | #include <sys/stat.h> |
| 29 | #include <unistd.h> |
| 30 | #include <fcntl.h> |
| 31 | |
| 32 | #include "lisp.h" |
| 33 | |
| 34 | /* Only MS-DOS does not define `subprocesses'. */ |
| 35 | #ifdef subprocesses |
| 36 | |
| 37 | #include <sys/socket.h> |
| 38 | #include <netdb.h> |
| 39 | #include <netinet/in.h> |
| 40 | #include <arpa/inet.h> |
| 41 | |
| 42 | /* Are local (unix) sockets supported? */ |
| 43 | #if defined (HAVE_SYS_UN_H) |
| 44 | #if !defined (AF_LOCAL) && defined (AF_UNIX) |
| 45 | #define AF_LOCAL AF_UNIX |
| 46 | #endif |
| 47 | #ifdef AF_LOCAL |
| 48 | #define HAVE_LOCAL_SOCKETS |
| 49 | #include <sys/un.h> |
| 50 | #endif |
| 51 | #endif |
| 52 | |
| 53 | #include <sys/ioctl.h> |
| 54 | #if defined (HAVE_NET_IF_H) |
| 55 | #include <net/if.h> |
| 56 | #endif /* HAVE_NET_IF_H */ |
| 57 | |
| 58 | #if defined (HAVE_IFADDRS_H) |
| 59 | /* Must be after net/if.h */ |
| 60 | #include <ifaddrs.h> |
| 61 | |
| 62 | /* We only use structs from this header when we use getifaddrs. */ |
| 63 | #if defined (HAVE_NET_IF_DL_H) |
| 64 | #include <net/if_dl.h> |
| 65 | #endif |
| 66 | |
| 67 | #endif |
| 68 | |
| 69 | #ifdef NEED_BSDTTY |
| 70 | #include <bsdtty.h> |
| 71 | #endif |
| 72 | |
| 73 | #ifdef USG5_4 |
| 74 | # include <sys/stream.h> |
| 75 | # include <sys/stropts.h> |
| 76 | #endif |
| 77 | |
| 78 | #ifdef HAVE_RES_INIT |
| 79 | #include <arpa/nameser.h> |
| 80 | #include <resolv.h> |
| 81 | #endif |
| 82 | |
| 83 | #ifdef HAVE_UTIL_H |
| 84 | #include <util.h> |
| 85 | #endif |
| 86 | |
| 87 | #ifdef HAVE_PTY_H |
| 88 | #include <pty.h> |
| 89 | #endif |
| 90 | |
| 91 | #include <c-ctype.h> |
| 92 | #include <sig2str.h> |
| 93 | #include <verify.h> |
| 94 | |
| 95 | #endif /* subprocesses */ |
| 96 | |
| 97 | #include "systime.h" |
| 98 | #include "systty.h" |
| 99 | |
| 100 | #include "window.h" |
| 101 | #include "character.h" |
| 102 | #include "buffer.h" |
| 103 | #include "coding.h" |
| 104 | #include "process.h" |
| 105 | #include "frame.h" |
| 106 | #include "termhooks.h" |
| 107 | #include "termopts.h" |
| 108 | #include "commands.h" |
| 109 | #include "keyboard.h" |
| 110 | #include "blockinput.h" |
| 111 | #include "dispextern.h" |
| 112 | #include "composite.h" |
| 113 | #include "atimer.h" |
| 114 | #include "sysselect.h" |
| 115 | #include "syssignal.h" |
| 116 | #include "syswait.h" |
| 117 | #ifdef HAVE_GNUTLS |
| 118 | #include "gnutls.h" |
| 119 | #endif |
| 120 | |
| 121 | #ifdef HAVE_WINDOW_SYSTEM |
| 122 | #include TERM_HEADER |
| 123 | #endif /* HAVE_WINDOW_SYSTEM */ |
| 124 | |
| 125 | #ifdef HAVE_GLIB |
| 126 | #include "xgselect.h" |
| 127 | #ifndef WINDOWSNT |
| 128 | #include <glib.h> |
| 129 | #endif |
| 130 | #endif |
| 131 | |
| 132 | #ifdef WINDOWSNT |
| 133 | extern int sys_select (int, fd_set *, fd_set *, fd_set *, |
| 134 | struct timespec *, void *); |
| 135 | #endif |
| 136 | |
| 137 | #ifndef SOCK_CLOEXEC |
| 138 | # define SOCK_CLOEXEC 0 |
| 139 | #endif |
| 140 | |
| 141 | #ifndef HAVE_ACCEPT4 |
| 142 | |
| 143 | /* Emulate GNU/Linux accept4 and socket well enough for this module. */ |
| 144 | |
| 145 | static int |
| 146 | close_on_exec (int fd) |
| 147 | { |
| 148 | if (0 <= fd) |
| 149 | fcntl (fd, F_SETFD, FD_CLOEXEC); |
| 150 | return fd; |
| 151 | } |
| 152 | |
| 153 | static int |
| 154 | accept4 (int sockfd, struct sockaddr *addr, socklen_t *addrlen, int flags) |
| 155 | { |
| 156 | return close_on_exec (accept (sockfd, addr, addrlen)); |
| 157 | } |
| 158 | |
| 159 | static int |
| 160 | process_socket (int domain, int type, int protocol) |
| 161 | { |
| 162 | return close_on_exec (socket (domain, type, protocol)); |
| 163 | } |
| 164 | # undef socket |
| 165 | # define socket(domain, type, protocol) process_socket (domain, type, protocol) |
| 166 | #endif |
| 167 | |
| 168 | /* Work around GCC 4.7.0 bug with strict overflow checking; see |
| 169 | <http://gcc.gnu.org/bugzilla/show_bug.cgi?id=52904>. |
| 170 | These lines can be removed once the GCC bug is fixed. */ |
| 171 | #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) |
| 172 | # pragma GCC diagnostic ignored "-Wstrict-overflow" |
| 173 | #endif |
| 174 | |
| 175 | Lisp_Object Qeuid, Qegid, Qcomm, Qstate, Qppid, Qpgrp, Qsess, Qttname, Qtpgid; |
| 176 | Lisp_Object Qminflt, Qmajflt, Qcminflt, Qcmajflt, Qutime, Qstime, Qcstime; |
| 177 | Lisp_Object Qcutime, Qpri, Qnice, Qthcount, Qstart, Qvsize, Qrss, Qargs; |
| 178 | Lisp_Object Quser, Qgroup, Qetime, Qpcpu, Qpmem, Qtime, Qctime; |
| 179 | Lisp_Object QCname, QCtype; |
| 180 | \f |
| 181 | /* True if keyboard input is on hold, zero otherwise. */ |
| 182 | |
| 183 | static bool kbd_is_on_hold; |
| 184 | |
| 185 | /* Nonzero means don't run process sentinels. This is used |
| 186 | when exiting. */ |
| 187 | bool inhibit_sentinels; |
| 188 | |
| 189 | #ifdef subprocesses |
| 190 | |
| 191 | Lisp_Object Qprocessp; |
| 192 | static Lisp_Object Qrun, Qstop, Qsignal; |
| 193 | static Lisp_Object Qopen, Qclosed, Qconnect, Qfailed, Qlisten; |
| 194 | Lisp_Object Qlocal; |
| 195 | static Lisp_Object Qipv4, Qdatagram, Qseqpacket; |
| 196 | static Lisp_Object Qreal, Qnetwork, Qserial; |
| 197 | #ifdef AF_INET6 |
| 198 | static Lisp_Object Qipv6; |
| 199 | #endif |
| 200 | static Lisp_Object QCport, QCprocess; |
| 201 | Lisp_Object QCspeed; |
| 202 | Lisp_Object QCbytesize, QCstopbits, QCparity, Qodd, Qeven; |
| 203 | Lisp_Object QCflowcontrol, Qhw, Qsw, QCsummary; |
| 204 | static Lisp_Object QCbuffer, QChost, QCservice; |
| 205 | static Lisp_Object QClocal, QCremote, QCcoding; |
| 206 | static Lisp_Object QCserver, QCnowait, QCnoquery, QCstop; |
| 207 | static Lisp_Object QCsentinel, QClog, QCoptions, QCplist; |
| 208 | static Lisp_Object Qlast_nonmenu_event; |
| 209 | static Lisp_Object Qinternal_default_process_sentinel; |
| 210 | static Lisp_Object Qinternal_default_process_filter; |
| 211 | |
| 212 | #define NETCONN_P(p) (EQ (XPROCESS (p)->type, Qnetwork)) |
| 213 | #define NETCONN1_P(p) (EQ (p->type, Qnetwork)) |
| 214 | #define SERIALCONN_P(p) (EQ (XPROCESS (p)->type, Qserial)) |
| 215 | #define SERIALCONN1_P(p) (EQ (p->type, Qserial)) |
| 216 | |
| 217 | /* Number of events of change of status of a process. */ |
| 218 | static EMACS_INT process_tick; |
| 219 | /* Number of events for which the user or sentinel has been notified. */ |
| 220 | static EMACS_INT update_tick; |
| 221 | |
| 222 | /* Define NON_BLOCKING_CONNECT if we can support non-blocking connects. */ |
| 223 | |
| 224 | /* Only W32 has this, it really means that select can't take write mask. */ |
| 225 | #ifdef BROKEN_NON_BLOCKING_CONNECT |
| 226 | #undef NON_BLOCKING_CONNECT |
| 227 | #define SELECT_CANT_DO_WRITE_MASK |
| 228 | #else |
| 229 | #ifndef NON_BLOCKING_CONNECT |
| 230 | #ifdef HAVE_SELECT |
| 231 | #if defined (HAVE_GETPEERNAME) || defined (GNU_LINUX) |
| 232 | #if defined (EWOULDBLOCK) || defined (EINPROGRESS) |
| 233 | #define NON_BLOCKING_CONNECT |
| 234 | #endif /* EWOULDBLOCK || EINPROGRESS */ |
| 235 | #endif /* HAVE_GETPEERNAME || GNU_LINUX */ |
| 236 | #endif /* HAVE_SELECT */ |
| 237 | #endif /* NON_BLOCKING_CONNECT */ |
| 238 | #endif /* BROKEN_NON_BLOCKING_CONNECT */ |
| 239 | |
| 240 | /* Define DATAGRAM_SOCKETS if datagrams can be used safely on |
| 241 | this system. We need to read full packets, so we need a |
| 242 | "non-destructive" select. So we require either native select, |
| 243 | or emulation of select using FIONREAD. */ |
| 244 | |
| 245 | #ifndef BROKEN_DATAGRAM_SOCKETS |
| 246 | # if defined HAVE_SELECT || defined USABLE_FIONREAD |
| 247 | # if defined HAVE_SENDTO && defined HAVE_RECVFROM && defined EMSGSIZE |
| 248 | # define DATAGRAM_SOCKETS |
| 249 | # endif |
| 250 | # endif |
| 251 | #endif |
| 252 | |
| 253 | #if defined HAVE_LOCAL_SOCKETS && defined DATAGRAM_SOCKETS |
| 254 | # define HAVE_SEQPACKET |
| 255 | #endif |
| 256 | |
| 257 | #if !defined (ADAPTIVE_READ_BUFFERING) && !defined (NO_ADAPTIVE_READ_BUFFERING) |
| 258 | #define ADAPTIVE_READ_BUFFERING |
| 259 | #endif |
| 260 | |
| 261 | #ifdef ADAPTIVE_READ_BUFFERING |
| 262 | #define READ_OUTPUT_DELAY_INCREMENT (TIMESPEC_RESOLUTION / 100) |
| 263 | #define READ_OUTPUT_DELAY_MAX (READ_OUTPUT_DELAY_INCREMENT * 5) |
| 264 | #define READ_OUTPUT_DELAY_MAX_MAX (READ_OUTPUT_DELAY_INCREMENT * 7) |
| 265 | |
| 266 | /* Number of processes which have a non-zero read_output_delay, |
| 267 | and therefore might be delayed for adaptive read buffering. */ |
| 268 | |
| 269 | static int process_output_delay_count; |
| 270 | |
| 271 | /* True if any process has non-nil read_output_skip. */ |
| 272 | |
| 273 | static bool process_output_skip; |
| 274 | |
| 275 | #else |
| 276 | #define process_output_delay_count 0 |
| 277 | #endif |
| 278 | |
| 279 | static void create_process (Lisp_Object, char **, Lisp_Object); |
| 280 | #ifdef USABLE_SIGIO |
| 281 | static bool keyboard_bit_set (fd_set *); |
| 282 | #endif |
| 283 | static void deactivate_process (Lisp_Object); |
| 284 | static void status_notify (struct Lisp_Process *); |
| 285 | static int read_process_output (Lisp_Object, int); |
| 286 | static void handle_child_signal (int); |
| 287 | static void create_pty (Lisp_Object); |
| 288 | |
| 289 | /* If we support a window system, turn on the code to poll periodically |
| 290 | to detect C-g. It isn't actually used when doing interrupt input. */ |
| 291 | #ifdef HAVE_WINDOW_SYSTEM |
| 292 | #define POLL_FOR_INPUT |
| 293 | #endif |
| 294 | |
| 295 | static Lisp_Object get_process (register Lisp_Object name); |
| 296 | static void exec_sentinel (Lisp_Object proc, Lisp_Object reason); |
| 297 | |
| 298 | /* Mask of bits indicating the descriptors that we wait for input on. */ |
| 299 | |
| 300 | static fd_set input_wait_mask; |
| 301 | |
| 302 | /* Mask that excludes keyboard input descriptor(s). */ |
| 303 | |
| 304 | static fd_set non_keyboard_wait_mask; |
| 305 | |
| 306 | /* Mask that excludes process input descriptor(s). */ |
| 307 | |
| 308 | static fd_set non_process_wait_mask; |
| 309 | |
| 310 | /* Mask for selecting for write. */ |
| 311 | |
| 312 | static fd_set write_mask; |
| 313 | |
| 314 | #ifdef NON_BLOCKING_CONNECT |
| 315 | /* Mask of bits indicating the descriptors that we wait for connect to |
| 316 | complete on. Once they complete, they are removed from this mask |
| 317 | and added to the input_wait_mask and non_keyboard_wait_mask. */ |
| 318 | |
| 319 | static fd_set connect_wait_mask; |
| 320 | |
| 321 | /* Number of bits set in connect_wait_mask. */ |
| 322 | static int num_pending_connects; |
| 323 | #endif /* NON_BLOCKING_CONNECT */ |
| 324 | |
| 325 | /* The largest descriptor currently in use for a process object; -1 if none. */ |
| 326 | static int max_process_desc; |
| 327 | |
| 328 | /* The largest descriptor currently in use for input; -1 if none. */ |
| 329 | static int max_input_desc; |
| 330 | |
| 331 | /* Indexed by descriptor, gives the process (if any) for that descriptor */ |
| 332 | static Lisp_Object chan_process[FD_SETSIZE]; |
| 333 | |
| 334 | /* Alist of elements (NAME . PROCESS) */ |
| 335 | static Lisp_Object Vprocess_alist; |
| 336 | |
| 337 | /* Buffered-ahead input char from process, indexed by channel. |
| 338 | -1 means empty (no char is buffered). |
| 339 | Used on sys V where the only way to tell if there is any |
| 340 | output from the process is to read at least one char. |
| 341 | Always -1 on systems that support FIONREAD. */ |
| 342 | |
| 343 | static int proc_buffered_char[FD_SETSIZE]; |
| 344 | |
| 345 | /* Table of `struct coding-system' for each process. */ |
| 346 | static struct coding_system *proc_decode_coding_system[FD_SETSIZE]; |
| 347 | static struct coding_system *proc_encode_coding_system[FD_SETSIZE]; |
| 348 | |
| 349 | #ifdef DATAGRAM_SOCKETS |
| 350 | /* Table of `partner address' for datagram sockets. */ |
| 351 | static struct sockaddr_and_len { |
| 352 | struct sockaddr *sa; |
| 353 | int len; |
| 354 | } datagram_address[FD_SETSIZE]; |
| 355 | #define DATAGRAM_CHAN_P(chan) (datagram_address[chan].sa != 0) |
| 356 | #define DATAGRAM_CONN_P(proc) \ |
| 357 | (PROCESSP (proc) && \ |
| 358 | XPROCESS (proc)->infd >= 0 && \ |
| 359 | datagram_address[XPROCESS (proc)->infd].sa != 0) |
| 360 | #else |
| 361 | #define DATAGRAM_CHAN_P(chan) (0) |
| 362 | #define DATAGRAM_CONN_P(proc) (0) |
| 363 | #endif |
| 364 | |
| 365 | /* FOR_EACH_PROCESS (LIST_VAR, PROC_VAR) followed by a statement is |
| 366 | a `for' loop which iterates over processes from Vprocess_alist. */ |
| 367 | |
| 368 | #define FOR_EACH_PROCESS(list_var, proc_var) \ |
| 369 | FOR_EACH_ALIST_VALUE (Vprocess_alist, list_var, proc_var) |
| 370 | |
| 371 | /* These setters are used only in this file, so they can be private. */ |
| 372 | static void |
| 373 | pset_buffer (struct Lisp_Process *p, Lisp_Object val) |
| 374 | { |
| 375 | p->buffer = val; |
| 376 | } |
| 377 | static void |
| 378 | pset_command (struct Lisp_Process *p, Lisp_Object val) |
| 379 | { |
| 380 | p->command = val; |
| 381 | } |
| 382 | static void |
| 383 | pset_decode_coding_system (struct Lisp_Process *p, Lisp_Object val) |
| 384 | { |
| 385 | p->decode_coding_system = val; |
| 386 | } |
| 387 | static void |
| 388 | pset_decoding_buf (struct Lisp_Process *p, Lisp_Object val) |
| 389 | { |
| 390 | p->decoding_buf = val; |
| 391 | } |
| 392 | static void |
| 393 | pset_encode_coding_system (struct Lisp_Process *p, Lisp_Object val) |
| 394 | { |
| 395 | p->encode_coding_system = val; |
| 396 | } |
| 397 | static void |
| 398 | pset_encoding_buf (struct Lisp_Process *p, Lisp_Object val) |
| 399 | { |
| 400 | p->encoding_buf = val; |
| 401 | } |
| 402 | static void |
| 403 | pset_filter (struct Lisp_Process *p, Lisp_Object val) |
| 404 | { |
| 405 | p->filter = NILP (val) ? Qinternal_default_process_filter : val; |
| 406 | } |
| 407 | static void |
| 408 | pset_log (struct Lisp_Process *p, Lisp_Object val) |
| 409 | { |
| 410 | p->log = val; |
| 411 | } |
| 412 | static void |
| 413 | pset_mark (struct Lisp_Process *p, Lisp_Object val) |
| 414 | { |
| 415 | p->mark = val; |
| 416 | } |
| 417 | static void |
| 418 | pset_name (struct Lisp_Process *p, Lisp_Object val) |
| 419 | { |
| 420 | p->name = val; |
| 421 | } |
| 422 | static void |
| 423 | pset_plist (struct Lisp_Process *p, Lisp_Object val) |
| 424 | { |
| 425 | p->plist = val; |
| 426 | } |
| 427 | static void |
| 428 | pset_sentinel (struct Lisp_Process *p, Lisp_Object val) |
| 429 | { |
| 430 | p->sentinel = NILP (val) ? Qinternal_default_process_sentinel : val; |
| 431 | } |
| 432 | static void |
| 433 | pset_status (struct Lisp_Process *p, Lisp_Object val) |
| 434 | { |
| 435 | p->status = val; |
| 436 | } |
| 437 | static void |
| 438 | pset_tty_name (struct Lisp_Process *p, Lisp_Object val) |
| 439 | { |
| 440 | p->tty_name = val; |
| 441 | } |
| 442 | static void |
| 443 | pset_type (struct Lisp_Process *p, Lisp_Object val) |
| 444 | { |
| 445 | p->type = val; |
| 446 | } |
| 447 | static void |
| 448 | pset_write_queue (struct Lisp_Process *p, Lisp_Object val) |
| 449 | { |
| 450 | p->write_queue = val; |
| 451 | } |
| 452 | |
| 453 | \f |
| 454 | |
| 455 | static struct fd_callback_data |
| 456 | { |
| 457 | fd_callback func; |
| 458 | void *data; |
| 459 | #define FOR_READ 1 |
| 460 | #define FOR_WRITE 2 |
| 461 | int condition; /* mask of the defines above. */ |
| 462 | } fd_callback_info[FD_SETSIZE]; |
| 463 | |
| 464 | |
| 465 | /* Add a file descriptor FD to be monitored for when read is possible. |
| 466 | When read is possible, call FUNC with argument DATA. */ |
| 467 | |
| 468 | void |
| 469 | add_read_fd (int fd, fd_callback func, void *data) |
| 470 | { |
| 471 | eassert (fd < FD_SETSIZE); |
| 472 | add_keyboard_wait_descriptor (fd); |
| 473 | |
| 474 | fd_callback_info[fd].func = func; |
| 475 | fd_callback_info[fd].data = data; |
| 476 | fd_callback_info[fd].condition |= FOR_READ; |
| 477 | } |
| 478 | |
| 479 | /* Stop monitoring file descriptor FD for when read is possible. */ |
| 480 | |
| 481 | void |
| 482 | delete_read_fd (int fd) |
| 483 | { |
| 484 | eassert (fd < FD_SETSIZE); |
| 485 | delete_keyboard_wait_descriptor (fd); |
| 486 | |
| 487 | fd_callback_info[fd].condition &= ~FOR_READ; |
| 488 | if (fd_callback_info[fd].condition == 0) |
| 489 | { |
| 490 | fd_callback_info[fd].func = 0; |
| 491 | fd_callback_info[fd].data = 0; |
| 492 | } |
| 493 | } |
| 494 | |
| 495 | /* Add a file descriptor FD to be monitored for when write is possible. |
| 496 | When write is possible, call FUNC with argument DATA. */ |
| 497 | |
| 498 | void |
| 499 | add_write_fd (int fd, fd_callback func, void *data) |
| 500 | { |
| 501 | eassert (fd < FD_SETSIZE); |
| 502 | FD_SET (fd, &write_mask); |
| 503 | if (fd > max_input_desc) |
| 504 | max_input_desc = fd; |
| 505 | |
| 506 | fd_callback_info[fd].func = func; |
| 507 | fd_callback_info[fd].data = data; |
| 508 | fd_callback_info[fd].condition |= FOR_WRITE; |
| 509 | } |
| 510 | |
| 511 | /* FD is no longer an input descriptor; update max_input_desc accordingly. */ |
| 512 | |
| 513 | static void |
| 514 | delete_input_desc (int fd) |
| 515 | { |
| 516 | if (fd == max_input_desc) |
| 517 | { |
| 518 | do |
| 519 | fd--; |
| 520 | while (0 <= fd && ! (FD_ISSET (fd, &input_wait_mask) |
| 521 | || FD_ISSET (fd, &write_mask))); |
| 522 | |
| 523 | max_input_desc = fd; |
| 524 | } |
| 525 | } |
| 526 | |
| 527 | /* Stop monitoring file descriptor FD for when write is possible. */ |
| 528 | |
| 529 | void |
| 530 | delete_write_fd (int fd) |
| 531 | { |
| 532 | eassert (fd < FD_SETSIZE); |
| 533 | FD_CLR (fd, &write_mask); |
| 534 | fd_callback_info[fd].condition &= ~FOR_WRITE; |
| 535 | if (fd_callback_info[fd].condition == 0) |
| 536 | { |
| 537 | fd_callback_info[fd].func = 0; |
| 538 | fd_callback_info[fd].data = 0; |
| 539 | delete_input_desc (fd); |
| 540 | } |
| 541 | } |
| 542 | |
| 543 | \f |
| 544 | /* Compute the Lisp form of the process status, p->status, from |
| 545 | the numeric status that was returned by `wait'. */ |
| 546 | |
| 547 | static Lisp_Object status_convert (int); |
| 548 | |
| 549 | static void |
| 550 | update_status (struct Lisp_Process *p) |
| 551 | { |
| 552 | eassert (p->raw_status_new); |
| 553 | pset_status (p, status_convert (p->raw_status)); |
| 554 | p->raw_status_new = 0; |
| 555 | } |
| 556 | |
| 557 | /* Convert a process status word in Unix format to |
| 558 | the list that we use internally. */ |
| 559 | |
| 560 | static Lisp_Object |
| 561 | status_convert (int w) |
| 562 | { |
| 563 | if (WIFSTOPPED (w)) |
| 564 | return Fcons (Qstop, Fcons (make_number (WSTOPSIG (w)), Qnil)); |
| 565 | else if (WIFEXITED (w)) |
| 566 | return Fcons (Qexit, Fcons (make_number (WEXITSTATUS (w)), |
| 567 | WCOREDUMP (w) ? Qt : Qnil)); |
| 568 | else if (WIFSIGNALED (w)) |
| 569 | return Fcons (Qsignal, Fcons (make_number (WTERMSIG (w)), |
| 570 | WCOREDUMP (w) ? Qt : Qnil)); |
| 571 | else |
| 572 | return Qrun; |
| 573 | } |
| 574 | |
| 575 | /* Given a status-list, extract the three pieces of information |
| 576 | and store them individually through the three pointers. */ |
| 577 | |
| 578 | static void |
| 579 | decode_status (Lisp_Object l, Lisp_Object *symbol, int *code, bool *coredump) |
| 580 | { |
| 581 | Lisp_Object tem; |
| 582 | |
| 583 | if (SYMBOLP (l)) |
| 584 | { |
| 585 | *symbol = l; |
| 586 | *code = 0; |
| 587 | *coredump = 0; |
| 588 | } |
| 589 | else |
| 590 | { |
| 591 | *symbol = XCAR (l); |
| 592 | tem = XCDR (l); |
| 593 | *code = XFASTINT (XCAR (tem)); |
| 594 | tem = XCDR (tem); |
| 595 | *coredump = !NILP (tem); |
| 596 | } |
| 597 | } |
| 598 | |
| 599 | /* Return a string describing a process status list. */ |
| 600 | |
| 601 | static Lisp_Object |
| 602 | status_message (struct Lisp_Process *p) |
| 603 | { |
| 604 | Lisp_Object status = p->status; |
| 605 | Lisp_Object symbol; |
| 606 | int code; |
| 607 | bool coredump; |
| 608 | Lisp_Object string, string2; |
| 609 | |
| 610 | decode_status (status, &symbol, &code, &coredump); |
| 611 | |
| 612 | if (EQ (symbol, Qsignal) || EQ (symbol, Qstop)) |
| 613 | { |
| 614 | char const *signame; |
| 615 | synchronize_system_messages_locale (); |
| 616 | signame = strsignal (code); |
| 617 | if (signame == 0) |
| 618 | string = build_string ("unknown"); |
| 619 | else |
| 620 | { |
| 621 | int c1, c2; |
| 622 | |
| 623 | string = build_unibyte_string (signame); |
| 624 | if (! NILP (Vlocale_coding_system)) |
| 625 | string = (code_convert_string_norecord |
| 626 | (string, Vlocale_coding_system, 0)); |
| 627 | c1 = STRING_CHAR (SDATA (string)); |
| 628 | c2 = downcase (c1); |
| 629 | if (c1 != c2) |
| 630 | Faset (string, make_number (0), make_number (c2)); |
| 631 | } |
| 632 | string2 = build_string (coredump ? " (core dumped)\n" : "\n"); |
| 633 | return concat2 (string, string2); |
| 634 | } |
| 635 | else if (EQ (symbol, Qexit)) |
| 636 | { |
| 637 | if (NETCONN1_P (p)) |
| 638 | return build_string (code == 0 ? "deleted\n" : "connection broken by remote peer\n"); |
| 639 | if (code == 0) |
| 640 | return build_string ("finished\n"); |
| 641 | string = Fnumber_to_string (make_number (code)); |
| 642 | string2 = build_string (coredump ? " (core dumped)\n" : "\n"); |
| 643 | return concat3 (build_string ("exited abnormally with code "), |
| 644 | string, string2); |
| 645 | } |
| 646 | else if (EQ (symbol, Qfailed)) |
| 647 | { |
| 648 | string = Fnumber_to_string (make_number (code)); |
| 649 | string2 = build_string ("\n"); |
| 650 | return concat3 (build_string ("failed with code "), |
| 651 | string, string2); |
| 652 | } |
| 653 | else |
| 654 | return Fcopy_sequence (Fsymbol_name (symbol)); |
| 655 | } |
| 656 | \f |
| 657 | enum { PTY_NAME_SIZE = 24 }; |
| 658 | |
| 659 | /* Open an available pty, returning a file descriptor. |
| 660 | Store into PTY_NAME the file name of the terminal corresponding to the pty. |
| 661 | Return -1 on failure. */ |
| 662 | |
| 663 | static int |
| 664 | allocate_pty (char pty_name[PTY_NAME_SIZE]) |
| 665 | { |
| 666 | #ifdef HAVE_PTYS |
| 667 | int fd; |
| 668 | |
| 669 | #ifdef PTY_ITERATION |
| 670 | PTY_ITERATION |
| 671 | #else |
| 672 | register int c, i; |
| 673 | for (c = FIRST_PTY_LETTER; c <= 'z'; c++) |
| 674 | for (i = 0; i < 16; i++) |
| 675 | #endif |
| 676 | { |
| 677 | #ifdef PTY_NAME_SPRINTF |
| 678 | PTY_NAME_SPRINTF |
| 679 | #else |
| 680 | sprintf (pty_name, "/dev/pty%c%x", c, i); |
| 681 | #endif /* no PTY_NAME_SPRINTF */ |
| 682 | |
| 683 | #ifdef PTY_OPEN |
| 684 | PTY_OPEN; |
| 685 | #else /* no PTY_OPEN */ |
| 686 | fd = emacs_open (pty_name, O_RDWR | O_NONBLOCK, 0); |
| 687 | #endif /* no PTY_OPEN */ |
| 688 | |
| 689 | if (fd >= 0) |
| 690 | { |
| 691 | #ifdef PTY_OPEN |
| 692 | /* Set FD's close-on-exec flag. This is needed even if |
| 693 | PT_OPEN calls posix_openpt with O_CLOEXEC, since POSIX |
| 694 | doesn't require support for that combination. |
| 695 | Multithreaded platforms where posix_openpt ignores |
| 696 | O_CLOEXEC (or where PTY_OPEN doesn't call posix_openpt) |
| 697 | have a race condition between the PTY_OPEN and here. */ |
| 698 | fcntl (fd, F_SETFD, FD_CLOEXEC); |
| 699 | #endif |
| 700 | /* check to make certain that both sides are available |
| 701 | this avoids a nasty yet stupid bug in rlogins */ |
| 702 | #ifdef PTY_TTY_NAME_SPRINTF |
| 703 | PTY_TTY_NAME_SPRINTF |
| 704 | #else |
| 705 | sprintf (pty_name, "/dev/tty%c%x", c, i); |
| 706 | #endif /* no PTY_TTY_NAME_SPRINTF */ |
| 707 | if (faccessat (AT_FDCWD, pty_name, R_OK | W_OK, AT_EACCESS) != 0) |
| 708 | { |
| 709 | emacs_close (fd); |
| 710 | # ifndef __sgi |
| 711 | continue; |
| 712 | # else |
| 713 | return -1; |
| 714 | # endif /* __sgi */ |
| 715 | } |
| 716 | setup_pty (fd); |
| 717 | return fd; |
| 718 | } |
| 719 | } |
| 720 | #endif /* HAVE_PTYS */ |
| 721 | return -1; |
| 722 | } |
| 723 | \f |
| 724 | static Lisp_Object |
| 725 | make_process (Lisp_Object name) |
| 726 | { |
| 727 | register Lisp_Object val, tem, name1; |
| 728 | register struct Lisp_Process *p; |
| 729 | char suffix[sizeof "<>" + INT_STRLEN_BOUND (printmax_t)]; |
| 730 | printmax_t i; |
| 731 | |
| 732 | p = allocate_process (); |
| 733 | /* Initialize Lisp data. Note that allocate_process initializes all |
| 734 | Lisp data to nil, so do it only for slots which should not be nil. */ |
| 735 | pset_status (p, Qrun); |
| 736 | pset_mark (p, Fmake_marker ()); |
| 737 | |
| 738 | /* Initialize non-Lisp data. Note that allocate_process zeroes out all |
| 739 | non-Lisp data, so do it only for slots which should not be zero. */ |
| 740 | p->infd = -1; |
| 741 | p->outfd = -1; |
| 742 | for (i = 0; i < PROCESS_OPEN_FDS; i++) |
| 743 | p->open_fd[i] = -1; |
| 744 | |
| 745 | #ifdef HAVE_GNUTLS |
| 746 | p->gnutls_initstage = GNUTLS_STAGE_EMPTY; |
| 747 | #endif |
| 748 | |
| 749 | /* If name is already in use, modify it until it is unused. */ |
| 750 | |
| 751 | name1 = name; |
| 752 | for (i = 1; ; i++) |
| 753 | { |
| 754 | tem = Fget_process (name1); |
| 755 | if (NILP (tem)) break; |
| 756 | name1 = concat2 (name, make_formatted_string (suffix, "<%"pMd">", i)); |
| 757 | } |
| 758 | name = name1; |
| 759 | pset_name (p, name); |
| 760 | pset_sentinel (p, Qinternal_default_process_sentinel); |
| 761 | pset_filter (p, Qinternal_default_process_filter); |
| 762 | XSETPROCESS (val, p); |
| 763 | Vprocess_alist = Fcons (Fcons (name, val), Vprocess_alist); |
| 764 | return val; |
| 765 | } |
| 766 | |
| 767 | static void |
| 768 | remove_process (register Lisp_Object proc) |
| 769 | { |
| 770 | register Lisp_Object pair; |
| 771 | |
| 772 | pair = Frassq (proc, Vprocess_alist); |
| 773 | Vprocess_alist = Fdelq (pair, Vprocess_alist); |
| 774 | |
| 775 | deactivate_process (proc); |
| 776 | } |
| 777 | |
| 778 | \f |
| 779 | DEFUN ("processp", Fprocessp, Sprocessp, 1, 1, 0, |
| 780 | doc: /* Return t if OBJECT is a process. */) |
| 781 | (Lisp_Object object) |
| 782 | { |
| 783 | return PROCESSP (object) ? Qt : Qnil; |
| 784 | } |
| 785 | |
| 786 | DEFUN ("get-process", Fget_process, Sget_process, 1, 1, 0, |
| 787 | doc: /* Return the process named NAME, or nil if there is none. */) |
| 788 | (register Lisp_Object name) |
| 789 | { |
| 790 | if (PROCESSP (name)) |
| 791 | return name; |
| 792 | CHECK_STRING (name); |
| 793 | return Fcdr (Fassoc (name, Vprocess_alist)); |
| 794 | } |
| 795 | |
| 796 | /* This is how commands for the user decode process arguments. It |
| 797 | accepts a process, a process name, a buffer, a buffer name, or nil. |
| 798 | Buffers denote the first process in the buffer, and nil denotes the |
| 799 | current buffer. */ |
| 800 | |
| 801 | static Lisp_Object |
| 802 | get_process (register Lisp_Object name) |
| 803 | { |
| 804 | register Lisp_Object proc, obj; |
| 805 | if (STRINGP (name)) |
| 806 | { |
| 807 | obj = Fget_process (name); |
| 808 | if (NILP (obj)) |
| 809 | obj = Fget_buffer (name); |
| 810 | if (NILP (obj)) |
| 811 | error ("Process %s does not exist", SDATA (name)); |
| 812 | } |
| 813 | else if (NILP (name)) |
| 814 | obj = Fcurrent_buffer (); |
| 815 | else |
| 816 | obj = name; |
| 817 | |
| 818 | /* Now obj should be either a buffer object or a process object. */ |
| 819 | if (BUFFERP (obj)) |
| 820 | { |
| 821 | if (NILP (BVAR (XBUFFER (obj), name))) |
| 822 | error ("Attempt to get process for a dead buffer"); |
| 823 | proc = Fget_buffer_process (obj); |
| 824 | if (NILP (proc)) |
| 825 | error ("Buffer %s has no process", SDATA (BVAR (XBUFFER (obj), name))); |
| 826 | } |
| 827 | else |
| 828 | { |
| 829 | CHECK_PROCESS (obj); |
| 830 | proc = obj; |
| 831 | } |
| 832 | return proc; |
| 833 | } |
| 834 | |
| 835 | |
| 836 | /* Fdelete_process promises to immediately forget about the process, but in |
| 837 | reality, Emacs needs to remember those processes until they have been |
| 838 | treated by the SIGCHLD handler and waitpid has been invoked on them; |
| 839 | otherwise they might fill up the kernel's process table. |
| 840 | |
| 841 | Some processes created by call-process are also put onto this list. |
| 842 | |
| 843 | Members of this list are (process-ID . filename) pairs. The |
| 844 | process-ID is a number; the filename, if a string, is a file that |
| 845 | needs to be removed after the process exits. */ |
| 846 | static Lisp_Object deleted_pid_list; |
| 847 | |
| 848 | void |
| 849 | record_deleted_pid (pid_t pid, Lisp_Object filename) |
| 850 | { |
| 851 | deleted_pid_list = Fcons (Fcons (make_fixnum_or_float (pid), filename), |
| 852 | /* GC treated elements set to nil. */ |
| 853 | Fdelq (Qnil, deleted_pid_list)); |
| 854 | |
| 855 | } |
| 856 | |
| 857 | DEFUN ("delete-process", Fdelete_process, Sdelete_process, 1, 1, 0, |
| 858 | doc: /* Delete PROCESS: kill it and forget about it immediately. |
| 859 | PROCESS may be a process, a buffer, the name of a process or buffer, or |
| 860 | nil, indicating the current buffer's process. */) |
| 861 | (register Lisp_Object process) |
| 862 | { |
| 863 | register struct Lisp_Process *p; |
| 864 | |
| 865 | process = get_process (process); |
| 866 | p = XPROCESS (process); |
| 867 | |
| 868 | p->raw_status_new = 0; |
| 869 | if (NETCONN1_P (p) || SERIALCONN1_P (p)) |
| 870 | { |
| 871 | pset_status (p, list2 (Qexit, make_number (0))); |
| 872 | p->tick = ++process_tick; |
| 873 | status_notify (p); |
| 874 | redisplay_preserve_echo_area (13); |
| 875 | } |
| 876 | else |
| 877 | { |
| 878 | if (p->alive) |
| 879 | record_kill_process (p, Qnil); |
| 880 | |
| 881 | if (p->infd >= 0) |
| 882 | { |
| 883 | /* Update P's status, since record_kill_process will make the |
| 884 | SIGCHLD handler update deleted_pid_list, not *P. */ |
| 885 | Lisp_Object symbol; |
| 886 | if (p->raw_status_new) |
| 887 | update_status (p); |
| 888 | symbol = CONSP (p->status) ? XCAR (p->status) : p->status; |
| 889 | if (! (EQ (symbol, Qsignal) || EQ (symbol, Qexit))) |
| 890 | pset_status (p, list2 (Qsignal, make_number (SIGKILL))); |
| 891 | |
| 892 | p->tick = ++process_tick; |
| 893 | status_notify (p); |
| 894 | redisplay_preserve_echo_area (13); |
| 895 | } |
| 896 | } |
| 897 | remove_process (process); |
| 898 | return Qnil; |
| 899 | } |
| 900 | \f |
| 901 | DEFUN ("process-status", Fprocess_status, Sprocess_status, 1, 1, 0, |
| 902 | doc: /* Return the status of PROCESS. |
| 903 | The returned value is one of the following symbols: |
| 904 | run -- for a process that is running. |
| 905 | stop -- for a process stopped but continuable. |
| 906 | exit -- for a process that has exited. |
| 907 | signal -- for a process that has got a fatal signal. |
| 908 | open -- for a network stream connection that is open. |
| 909 | listen -- for a network stream server that is listening. |
| 910 | closed -- for a network stream connection that is closed. |
| 911 | connect -- when waiting for a non-blocking connection to complete. |
| 912 | failed -- when a non-blocking connection has failed. |
| 913 | nil -- if arg is a process name and no such process exists. |
| 914 | PROCESS may be a process, a buffer, the name of a process, or |
| 915 | nil, indicating the current buffer's process. */) |
| 916 | (register Lisp_Object process) |
| 917 | { |
| 918 | register struct Lisp_Process *p; |
| 919 | register Lisp_Object status; |
| 920 | |
| 921 | if (STRINGP (process)) |
| 922 | process = Fget_process (process); |
| 923 | else |
| 924 | process = get_process (process); |
| 925 | |
| 926 | if (NILP (process)) |
| 927 | return process; |
| 928 | |
| 929 | p = XPROCESS (process); |
| 930 | if (p->raw_status_new) |
| 931 | update_status (p); |
| 932 | status = p->status; |
| 933 | if (CONSP (status)) |
| 934 | status = XCAR (status); |
| 935 | if (NETCONN1_P (p) || SERIALCONN1_P (p)) |
| 936 | { |
| 937 | if (EQ (status, Qexit)) |
| 938 | status = Qclosed; |
| 939 | else if (EQ (p->command, Qt)) |
| 940 | status = Qstop; |
| 941 | else if (EQ (status, Qrun)) |
| 942 | status = Qopen; |
| 943 | } |
| 944 | return status; |
| 945 | } |
| 946 | |
| 947 | DEFUN ("process-exit-status", Fprocess_exit_status, Sprocess_exit_status, |
| 948 | 1, 1, 0, |
| 949 | doc: /* Return the exit status of PROCESS or the signal number that killed it. |
| 950 | If PROCESS has not yet exited or died, return 0. */) |
| 951 | (register Lisp_Object process) |
| 952 | { |
| 953 | CHECK_PROCESS (process); |
| 954 | if (XPROCESS (process)->raw_status_new) |
| 955 | update_status (XPROCESS (process)); |
| 956 | if (CONSP (XPROCESS (process)->status)) |
| 957 | return XCAR (XCDR (XPROCESS (process)->status)); |
| 958 | return make_number (0); |
| 959 | } |
| 960 | |
| 961 | DEFUN ("process-id", Fprocess_id, Sprocess_id, 1, 1, 0, |
| 962 | doc: /* Return the process id of PROCESS. |
| 963 | This is the pid of the external process which PROCESS uses or talks to. |
| 964 | For a network connection, this value is nil. */) |
| 965 | (register Lisp_Object process) |
| 966 | { |
| 967 | pid_t pid; |
| 968 | |
| 969 | CHECK_PROCESS (process); |
| 970 | pid = XPROCESS (process)->pid; |
| 971 | return (pid ? make_fixnum_or_float (pid) : Qnil); |
| 972 | } |
| 973 | |
| 974 | DEFUN ("process-name", Fprocess_name, Sprocess_name, 1, 1, 0, |
| 975 | doc: /* Return the name of PROCESS, as a string. |
| 976 | This is the name of the program invoked in PROCESS, |
| 977 | possibly modified to make it unique among process names. */) |
| 978 | (register Lisp_Object process) |
| 979 | { |
| 980 | CHECK_PROCESS (process); |
| 981 | return XPROCESS (process)->name; |
| 982 | } |
| 983 | |
| 984 | DEFUN ("process-command", Fprocess_command, Sprocess_command, 1, 1, 0, |
| 985 | doc: /* Return the command that was executed to start PROCESS. |
| 986 | This is a list of strings, the first string being the program executed |
| 987 | and the rest of the strings being the arguments given to it. |
| 988 | For a network or serial process, this is nil (process is running) or t |
| 989 | \(process is stopped). */) |
| 990 | (register Lisp_Object process) |
| 991 | { |
| 992 | CHECK_PROCESS (process); |
| 993 | return XPROCESS (process)->command; |
| 994 | } |
| 995 | |
| 996 | DEFUN ("process-tty-name", Fprocess_tty_name, Sprocess_tty_name, 1, 1, 0, |
| 997 | doc: /* Return the name of the terminal PROCESS uses, or nil if none. |
| 998 | This is the terminal that the process itself reads and writes on, |
| 999 | not the name of the pty that Emacs uses to talk with that terminal. */) |
| 1000 | (register Lisp_Object process) |
| 1001 | { |
| 1002 | CHECK_PROCESS (process); |
| 1003 | return XPROCESS (process)->tty_name; |
| 1004 | } |
| 1005 | |
| 1006 | DEFUN ("set-process-buffer", Fset_process_buffer, Sset_process_buffer, |
| 1007 | 2, 2, 0, |
| 1008 | doc: /* Set buffer associated with PROCESS to BUFFER (a buffer, or nil). |
| 1009 | Return BUFFER. */) |
| 1010 | (register Lisp_Object process, Lisp_Object buffer) |
| 1011 | { |
| 1012 | struct Lisp_Process *p; |
| 1013 | |
| 1014 | CHECK_PROCESS (process); |
| 1015 | if (!NILP (buffer)) |
| 1016 | CHECK_BUFFER (buffer); |
| 1017 | p = XPROCESS (process); |
| 1018 | pset_buffer (p, buffer); |
| 1019 | if (NETCONN1_P (p) || SERIALCONN1_P (p)) |
| 1020 | pset_childp (p, Fplist_put (p->childp, QCbuffer, buffer)); |
| 1021 | setup_process_coding_systems (process); |
| 1022 | return buffer; |
| 1023 | } |
| 1024 | |
| 1025 | DEFUN ("process-buffer", Fprocess_buffer, Sprocess_buffer, |
| 1026 | 1, 1, 0, |
| 1027 | doc: /* Return the buffer PROCESS is associated with. |
| 1028 | The default process filter inserts output from PROCESS into this buffer. */) |
| 1029 | (register Lisp_Object process) |
| 1030 | { |
| 1031 | CHECK_PROCESS (process); |
| 1032 | return XPROCESS (process)->buffer; |
| 1033 | } |
| 1034 | |
| 1035 | DEFUN ("process-mark", Fprocess_mark, Sprocess_mark, |
| 1036 | 1, 1, 0, |
| 1037 | doc: /* Return the marker for the end of the last output from PROCESS. */) |
| 1038 | (register Lisp_Object process) |
| 1039 | { |
| 1040 | CHECK_PROCESS (process); |
| 1041 | return XPROCESS (process)->mark; |
| 1042 | } |
| 1043 | |
| 1044 | DEFUN ("set-process-filter", Fset_process_filter, Sset_process_filter, |
| 1045 | 2, 2, 0, |
| 1046 | doc: /* Give PROCESS the filter function FILTER; nil means default. |
| 1047 | A value of t means stop accepting output from the process. |
| 1048 | |
| 1049 | When a process has a non-default filter, its buffer is not used for output. |
| 1050 | Instead, each time it does output, the entire string of output is |
| 1051 | passed to the filter. |
| 1052 | |
| 1053 | The filter gets two arguments: the process and the string of output. |
| 1054 | The string argument is normally a multibyte string, except: |
| 1055 | - if the process's input coding system is no-conversion or raw-text, |
| 1056 | it is a unibyte string (the non-converted input), or else |
| 1057 | - if `default-enable-multibyte-characters' is nil, it is a unibyte |
| 1058 | string (the result of converting the decoded input multibyte |
| 1059 | string to unibyte with `string-make-unibyte'). */) |
| 1060 | (register Lisp_Object process, Lisp_Object filter) |
| 1061 | { |
| 1062 | struct Lisp_Process *p; |
| 1063 | |
| 1064 | CHECK_PROCESS (process); |
| 1065 | p = XPROCESS (process); |
| 1066 | |
| 1067 | /* Don't signal an error if the process's input file descriptor |
| 1068 | is closed. This could make debugging Lisp more difficult, |
| 1069 | for example when doing something like |
| 1070 | |
| 1071 | (setq process (start-process ...)) |
| 1072 | (debug) |
| 1073 | (set-process-filter process ...) */ |
| 1074 | |
| 1075 | if (NILP (filter)) |
| 1076 | filter = Qinternal_default_process_filter; |
| 1077 | |
| 1078 | if (p->infd >= 0) |
| 1079 | { |
| 1080 | if (EQ (filter, Qt) && !EQ (p->status, Qlisten)) |
| 1081 | { |
| 1082 | FD_CLR (p->infd, &input_wait_mask); |
| 1083 | FD_CLR (p->infd, &non_keyboard_wait_mask); |
| 1084 | } |
| 1085 | else if (EQ (p->filter, Qt) |
| 1086 | /* Network or serial process not stopped: */ |
| 1087 | && !EQ (p->command, Qt)) |
| 1088 | { |
| 1089 | FD_SET (p->infd, &input_wait_mask); |
| 1090 | FD_SET (p->infd, &non_keyboard_wait_mask); |
| 1091 | } |
| 1092 | } |
| 1093 | |
| 1094 | pset_filter (p, filter); |
| 1095 | if (NETCONN1_P (p) || SERIALCONN1_P (p)) |
| 1096 | pset_childp (p, Fplist_put (p->childp, QCfilter, filter)); |
| 1097 | setup_process_coding_systems (process); |
| 1098 | return filter; |
| 1099 | } |
| 1100 | |
| 1101 | DEFUN ("process-filter", Fprocess_filter, Sprocess_filter, |
| 1102 | 1, 1, 0, |
| 1103 | doc: /* Return the filter function of PROCESS. |
| 1104 | See `set-process-filter' for more info on filter functions. */) |
| 1105 | (register Lisp_Object process) |
| 1106 | { |
| 1107 | CHECK_PROCESS (process); |
| 1108 | return XPROCESS (process)->filter; |
| 1109 | } |
| 1110 | |
| 1111 | DEFUN ("set-process-sentinel", Fset_process_sentinel, Sset_process_sentinel, |
| 1112 | 2, 2, 0, |
| 1113 | doc: /* Give PROCESS the sentinel SENTINEL; nil for default. |
| 1114 | The sentinel is called as a function when the process changes state. |
| 1115 | It gets two arguments: the process, and a string describing the change. */) |
| 1116 | (register Lisp_Object process, Lisp_Object sentinel) |
| 1117 | { |
| 1118 | struct Lisp_Process *p; |
| 1119 | |
| 1120 | CHECK_PROCESS (process); |
| 1121 | p = XPROCESS (process); |
| 1122 | |
| 1123 | if (NILP (sentinel)) |
| 1124 | sentinel = Qinternal_default_process_sentinel; |
| 1125 | |
| 1126 | pset_sentinel (p, sentinel); |
| 1127 | if (NETCONN1_P (p) || SERIALCONN1_P (p)) |
| 1128 | pset_childp (p, Fplist_put (p->childp, QCsentinel, sentinel)); |
| 1129 | return sentinel; |
| 1130 | } |
| 1131 | |
| 1132 | DEFUN ("process-sentinel", Fprocess_sentinel, Sprocess_sentinel, |
| 1133 | 1, 1, 0, |
| 1134 | doc: /* Return the sentinel of PROCESS. |
| 1135 | See `set-process-sentinel' for more info on sentinels. */) |
| 1136 | (register Lisp_Object process) |
| 1137 | { |
| 1138 | CHECK_PROCESS (process); |
| 1139 | return XPROCESS (process)->sentinel; |
| 1140 | } |
| 1141 | |
| 1142 | DEFUN ("set-process-window-size", Fset_process_window_size, |
| 1143 | Sset_process_window_size, 3, 3, 0, |
| 1144 | doc: /* Tell PROCESS that it has logical window size HEIGHT and WIDTH. */) |
| 1145 | (Lisp_Object process, Lisp_Object height, Lisp_Object width) |
| 1146 | { |
| 1147 | CHECK_PROCESS (process); |
| 1148 | |
| 1149 | /* All known platforms store window sizes as 'unsigned short'. */ |
| 1150 | CHECK_RANGED_INTEGER (height, 0, USHRT_MAX); |
| 1151 | CHECK_RANGED_INTEGER (width, 0, USHRT_MAX); |
| 1152 | |
| 1153 | if (XPROCESS (process)->infd < 0 |
| 1154 | || (set_window_size (XPROCESS (process)->infd, |
| 1155 | XINT (height), XINT (width)) |
| 1156 | < 0)) |
| 1157 | return Qnil; |
| 1158 | else |
| 1159 | return Qt; |
| 1160 | } |
| 1161 | |
| 1162 | DEFUN ("set-process-inherit-coding-system-flag", |
| 1163 | Fset_process_inherit_coding_system_flag, |
| 1164 | Sset_process_inherit_coding_system_flag, 2, 2, 0, |
| 1165 | doc: /* Determine whether buffer of PROCESS will inherit coding-system. |
| 1166 | If the second argument FLAG is non-nil, then the variable |
| 1167 | `buffer-file-coding-system' of the buffer associated with PROCESS |
| 1168 | will be bound to the value of the coding system used to decode |
| 1169 | the process output. |
| 1170 | |
| 1171 | This is useful when the coding system specified for the process buffer |
| 1172 | leaves either the character code conversion or the end-of-line conversion |
| 1173 | unspecified, or if the coding system used to decode the process output |
| 1174 | is more appropriate for saving the process buffer. |
| 1175 | |
| 1176 | Binding the variable `inherit-process-coding-system' to non-nil before |
| 1177 | starting the process is an alternative way of setting the inherit flag |
| 1178 | for the process which will run. |
| 1179 | |
| 1180 | This function returns FLAG. */) |
| 1181 | (register Lisp_Object process, Lisp_Object flag) |
| 1182 | { |
| 1183 | CHECK_PROCESS (process); |
| 1184 | XPROCESS (process)->inherit_coding_system_flag = !NILP (flag); |
| 1185 | return flag; |
| 1186 | } |
| 1187 | |
| 1188 | DEFUN ("set-process-query-on-exit-flag", |
| 1189 | Fset_process_query_on_exit_flag, Sset_process_query_on_exit_flag, |
| 1190 | 2, 2, 0, |
| 1191 | doc: /* Specify if query is needed for PROCESS when Emacs is exited. |
| 1192 | If the second argument FLAG is non-nil, Emacs will query the user before |
| 1193 | exiting or killing a buffer if PROCESS is running. This function |
| 1194 | returns FLAG. */) |
| 1195 | (register Lisp_Object process, Lisp_Object flag) |
| 1196 | { |
| 1197 | CHECK_PROCESS (process); |
| 1198 | XPROCESS (process)->kill_without_query = NILP (flag); |
| 1199 | return flag; |
| 1200 | } |
| 1201 | |
| 1202 | DEFUN ("process-query-on-exit-flag", |
| 1203 | Fprocess_query_on_exit_flag, Sprocess_query_on_exit_flag, |
| 1204 | 1, 1, 0, |
| 1205 | doc: /* Return the current value of query-on-exit flag for PROCESS. */) |
| 1206 | (register Lisp_Object process) |
| 1207 | { |
| 1208 | CHECK_PROCESS (process); |
| 1209 | return (XPROCESS (process)->kill_without_query ? Qnil : Qt); |
| 1210 | } |
| 1211 | |
| 1212 | DEFUN ("process-contact", Fprocess_contact, Sprocess_contact, |
| 1213 | 1, 2, 0, |
| 1214 | doc: /* Return the contact info of PROCESS; t for a real child. |
| 1215 | For a network or serial connection, the value depends on the optional |
| 1216 | KEY arg. If KEY is nil, value is a cons cell of the form (HOST |
| 1217 | SERVICE) for a network connection or (PORT SPEED) for a serial |
| 1218 | connection. If KEY is t, the complete contact information for the |
| 1219 | connection is returned, else the specific value for the keyword KEY is |
| 1220 | returned. See `make-network-process' or `make-serial-process' for a |
| 1221 | list of keywords. */) |
| 1222 | (register Lisp_Object process, Lisp_Object key) |
| 1223 | { |
| 1224 | Lisp_Object contact; |
| 1225 | |
| 1226 | CHECK_PROCESS (process); |
| 1227 | contact = XPROCESS (process)->childp; |
| 1228 | |
| 1229 | #ifdef DATAGRAM_SOCKETS |
| 1230 | if (DATAGRAM_CONN_P (process) |
| 1231 | && (EQ (key, Qt) || EQ (key, QCremote))) |
| 1232 | contact = Fplist_put (contact, QCremote, |
| 1233 | Fprocess_datagram_address (process)); |
| 1234 | #endif |
| 1235 | |
| 1236 | if ((!NETCONN_P (process) && !SERIALCONN_P (process)) || EQ (key, Qt)) |
| 1237 | return contact; |
| 1238 | if (NILP (key) && NETCONN_P (process)) |
| 1239 | return list2 (Fplist_get (contact, QChost), |
| 1240 | Fplist_get (contact, QCservice)); |
| 1241 | if (NILP (key) && SERIALCONN_P (process)) |
| 1242 | return list2 (Fplist_get (contact, QCport), |
| 1243 | Fplist_get (contact, QCspeed)); |
| 1244 | return Fplist_get (contact, key); |
| 1245 | } |
| 1246 | |
| 1247 | DEFUN ("process-plist", Fprocess_plist, Sprocess_plist, |
| 1248 | 1, 1, 0, |
| 1249 | doc: /* Return the plist of PROCESS. */) |
| 1250 | (register Lisp_Object process) |
| 1251 | { |
| 1252 | CHECK_PROCESS (process); |
| 1253 | return XPROCESS (process)->plist; |
| 1254 | } |
| 1255 | |
| 1256 | DEFUN ("set-process-plist", Fset_process_plist, Sset_process_plist, |
| 1257 | 2, 2, 0, |
| 1258 | doc: /* Replace the plist of PROCESS with PLIST. Returns PLIST. */) |
| 1259 | (register Lisp_Object process, Lisp_Object plist) |
| 1260 | { |
| 1261 | CHECK_PROCESS (process); |
| 1262 | CHECK_LIST (plist); |
| 1263 | |
| 1264 | pset_plist (XPROCESS (process), plist); |
| 1265 | return plist; |
| 1266 | } |
| 1267 | |
| 1268 | #if 0 /* Turned off because we don't currently record this info |
| 1269 | in the process. Perhaps add it. */ |
| 1270 | DEFUN ("process-connection", Fprocess_connection, Sprocess_connection, 1, 1, 0, |
| 1271 | doc: /* Return the connection type of PROCESS. |
| 1272 | The value is nil for a pipe, t or `pty' for a pty, or `stream' for |
| 1273 | a socket connection. */) |
| 1274 | (Lisp_Object process) |
| 1275 | { |
| 1276 | return XPROCESS (process)->type; |
| 1277 | } |
| 1278 | #endif |
| 1279 | |
| 1280 | DEFUN ("process-type", Fprocess_type, Sprocess_type, 1, 1, 0, |
| 1281 | doc: /* Return the connection type of PROCESS. |
| 1282 | The value is either the symbol `real', `network', or `serial'. |
| 1283 | PROCESS may be a process, a buffer, the name of a process or buffer, or |
| 1284 | nil, indicating the current buffer's process. */) |
| 1285 | (Lisp_Object process) |
| 1286 | { |
| 1287 | Lisp_Object proc; |
| 1288 | proc = get_process (process); |
| 1289 | return XPROCESS (proc)->type; |
| 1290 | } |
| 1291 | |
| 1292 | DEFUN ("format-network-address", Fformat_network_address, Sformat_network_address, |
| 1293 | 1, 2, 0, |
| 1294 | doc: /* Convert network ADDRESS from internal format to a string. |
| 1295 | A 4 or 5 element vector represents an IPv4 address (with port number). |
| 1296 | An 8 or 9 element vector represents an IPv6 address (with port number). |
| 1297 | If optional second argument OMIT-PORT is non-nil, don't include a port |
| 1298 | number in the string, even when present in ADDRESS. |
| 1299 | Returns nil if format of ADDRESS is invalid. */) |
| 1300 | (Lisp_Object address, Lisp_Object omit_port) |
| 1301 | { |
| 1302 | if (NILP (address)) |
| 1303 | return Qnil; |
| 1304 | |
| 1305 | if (STRINGP (address)) /* AF_LOCAL */ |
| 1306 | return address; |
| 1307 | |
| 1308 | if (VECTORP (address)) /* AF_INET or AF_INET6 */ |
| 1309 | { |
| 1310 | register struct Lisp_Vector *p = XVECTOR (address); |
| 1311 | ptrdiff_t size = p->header.size; |
| 1312 | Lisp_Object args[10]; |
| 1313 | int nargs, i; |
| 1314 | |
| 1315 | if (size == 4 || (size == 5 && !NILP (omit_port))) |
| 1316 | { |
| 1317 | args[0] = build_string ("%d.%d.%d.%d"); |
| 1318 | nargs = 4; |
| 1319 | } |
| 1320 | else if (size == 5) |
| 1321 | { |
| 1322 | args[0] = build_string ("%d.%d.%d.%d:%d"); |
| 1323 | nargs = 5; |
| 1324 | } |
| 1325 | else if (size == 8 || (size == 9 && !NILP (omit_port))) |
| 1326 | { |
| 1327 | args[0] = build_string ("%x:%x:%x:%x:%x:%x:%x:%x"); |
| 1328 | nargs = 8; |
| 1329 | } |
| 1330 | else if (size == 9) |
| 1331 | { |
| 1332 | args[0] = build_string ("[%x:%x:%x:%x:%x:%x:%x:%x]:%d"); |
| 1333 | nargs = 9; |
| 1334 | } |
| 1335 | else |
| 1336 | return Qnil; |
| 1337 | |
| 1338 | for (i = 0; i < nargs; i++) |
| 1339 | { |
| 1340 | if (! RANGED_INTEGERP (0, p->contents[i], 65535)) |
| 1341 | return Qnil; |
| 1342 | |
| 1343 | if (nargs <= 5 /* IPv4 */ |
| 1344 | && i < 4 /* host, not port */ |
| 1345 | && XINT (p->contents[i]) > 255) |
| 1346 | return Qnil; |
| 1347 | |
| 1348 | args[i+1] = p->contents[i]; |
| 1349 | } |
| 1350 | |
| 1351 | return Fformat (nargs+1, args); |
| 1352 | } |
| 1353 | |
| 1354 | if (CONSP (address)) |
| 1355 | { |
| 1356 | Lisp_Object args[2]; |
| 1357 | args[0] = build_string ("<Family %d>"); |
| 1358 | args[1] = Fcar (address); |
| 1359 | return Fformat (2, args); |
| 1360 | } |
| 1361 | |
| 1362 | return Qnil; |
| 1363 | } |
| 1364 | |
| 1365 | DEFUN ("process-list", Fprocess_list, Sprocess_list, 0, 0, 0, |
| 1366 | doc: /* Return a list of all processes that are Emacs sub-processes. */) |
| 1367 | (void) |
| 1368 | { |
| 1369 | return Fmapcar (Qcdr, Vprocess_alist); |
| 1370 | } |
| 1371 | \f |
| 1372 | /* Starting asynchronous inferior processes. */ |
| 1373 | |
| 1374 | static void start_process_unwind (Lisp_Object proc); |
| 1375 | |
| 1376 | DEFUN ("start-process", Fstart_process, Sstart_process, 3, MANY, 0, |
| 1377 | doc: /* Start a program in a subprocess. Return the process object for it. |
| 1378 | NAME is name for process. It is modified if necessary to make it unique. |
| 1379 | BUFFER is the buffer (or buffer name) to associate with the process. |
| 1380 | |
| 1381 | Process output (both standard output and standard error streams) goes |
| 1382 | at end of BUFFER, unless you specify an output stream or filter |
| 1383 | function to handle the output. BUFFER may also be nil, meaning that |
| 1384 | this process is not associated with any buffer. |
| 1385 | |
| 1386 | PROGRAM is the program file name. It is searched for in `exec-path' |
| 1387 | (which see). If nil, just associate a pty with the buffer. Remaining |
| 1388 | arguments are strings to give program as arguments. |
| 1389 | |
| 1390 | If you want to separate standard output from standard error, invoke |
| 1391 | the command through a shell and redirect one of them using the shell |
| 1392 | syntax. |
| 1393 | |
| 1394 | usage: (start-process NAME BUFFER PROGRAM &rest PROGRAM-ARGS) */) |
| 1395 | (ptrdiff_t nargs, Lisp_Object *args) |
| 1396 | { |
| 1397 | Lisp_Object buffer, name, program, proc, current_dir, tem; |
| 1398 | register unsigned char **new_argv; |
| 1399 | ptrdiff_t i; |
| 1400 | ptrdiff_t count = SPECPDL_INDEX (); |
| 1401 | |
| 1402 | buffer = args[1]; |
| 1403 | if (!NILP (buffer)) |
| 1404 | buffer = Fget_buffer_create (buffer); |
| 1405 | |
| 1406 | /* Make sure that the child will be able to chdir to the current |
| 1407 | buffer's current directory, or its unhandled equivalent. We |
| 1408 | can't just have the child check for an error when it does the |
| 1409 | chdir, since it's in a vfork. |
| 1410 | |
| 1411 | We have to GCPRO around this because Fexpand_file_name and |
| 1412 | Funhandled_file_name_directory might call a file name handling |
| 1413 | function. The argument list is protected by the caller, so all |
| 1414 | we really have to worry about is buffer. */ |
| 1415 | { |
| 1416 | struct gcpro gcpro1; |
| 1417 | GCPRO1 (buffer); |
| 1418 | current_dir = encode_current_directory (); |
| 1419 | UNGCPRO; |
| 1420 | } |
| 1421 | |
| 1422 | name = args[0]; |
| 1423 | CHECK_STRING (name); |
| 1424 | |
| 1425 | program = args[2]; |
| 1426 | |
| 1427 | if (!NILP (program)) |
| 1428 | CHECK_STRING (program); |
| 1429 | |
| 1430 | proc = make_process (name); |
| 1431 | /* If an error occurs and we can't start the process, we want to |
| 1432 | remove it from the process list. This means that each error |
| 1433 | check in create_process doesn't need to call remove_process |
| 1434 | itself; it's all taken care of here. */ |
| 1435 | record_unwind_protect (start_process_unwind, proc); |
| 1436 | |
| 1437 | pset_childp (XPROCESS (proc), Qt); |
| 1438 | pset_plist (XPROCESS (proc), Qnil); |
| 1439 | pset_type (XPROCESS (proc), Qreal); |
| 1440 | pset_buffer (XPROCESS (proc), buffer); |
| 1441 | pset_sentinel (XPROCESS (proc), Qinternal_default_process_sentinel); |
| 1442 | pset_filter (XPROCESS (proc), Qinternal_default_process_filter); |
| 1443 | pset_command (XPROCESS (proc), Flist (nargs - 2, args + 2)); |
| 1444 | |
| 1445 | #ifdef HAVE_GNUTLS |
| 1446 | /* AKA GNUTLS_INITSTAGE(proc). */ |
| 1447 | XPROCESS (proc)->gnutls_initstage = GNUTLS_STAGE_EMPTY; |
| 1448 | pset_gnutls_cred_type (XPROCESS (proc), Qnil); |
| 1449 | #endif |
| 1450 | |
| 1451 | #ifdef ADAPTIVE_READ_BUFFERING |
| 1452 | XPROCESS (proc)->adaptive_read_buffering |
| 1453 | = (NILP (Vprocess_adaptive_read_buffering) ? 0 |
| 1454 | : EQ (Vprocess_adaptive_read_buffering, Qt) ? 1 : 2); |
| 1455 | #endif |
| 1456 | |
| 1457 | /* Make the process marker point into the process buffer (if any). */ |
| 1458 | if (BUFFERP (buffer)) |
| 1459 | set_marker_both (XPROCESS (proc)->mark, buffer, |
| 1460 | BUF_ZV (XBUFFER (buffer)), |
| 1461 | BUF_ZV_BYTE (XBUFFER (buffer))); |
| 1462 | |
| 1463 | { |
| 1464 | /* Decide coding systems for communicating with the process. Here |
| 1465 | we don't setup the structure coding_system nor pay attention to |
| 1466 | unibyte mode. They are done in create_process. */ |
| 1467 | |
| 1468 | /* Qt denotes we have not yet called Ffind_operation_coding_system. */ |
| 1469 | Lisp_Object coding_systems = Qt; |
| 1470 | Lisp_Object val, *args2; |
| 1471 | struct gcpro gcpro1, gcpro2; |
| 1472 | |
| 1473 | val = Vcoding_system_for_read; |
| 1474 | if (NILP (val)) |
| 1475 | { |
| 1476 | args2 = alloca ((nargs + 1) * sizeof *args2); |
| 1477 | args2[0] = Qstart_process; |
| 1478 | for (i = 0; i < nargs; i++) args2[i + 1] = args[i]; |
| 1479 | GCPRO2 (proc, current_dir); |
| 1480 | if (!NILP (program)) |
| 1481 | coding_systems = Ffind_operation_coding_system (nargs + 1, args2); |
| 1482 | UNGCPRO; |
| 1483 | if (CONSP (coding_systems)) |
| 1484 | val = XCAR (coding_systems); |
| 1485 | else if (CONSP (Vdefault_process_coding_system)) |
| 1486 | val = XCAR (Vdefault_process_coding_system); |
| 1487 | } |
| 1488 | pset_decode_coding_system (XPROCESS (proc), val); |
| 1489 | |
| 1490 | val = Vcoding_system_for_write; |
| 1491 | if (NILP (val)) |
| 1492 | { |
| 1493 | if (EQ (coding_systems, Qt)) |
| 1494 | { |
| 1495 | args2 = alloca ((nargs + 1) * sizeof *args2); |
| 1496 | args2[0] = Qstart_process; |
| 1497 | for (i = 0; i < nargs; i++) args2[i + 1] = args[i]; |
| 1498 | GCPRO2 (proc, current_dir); |
| 1499 | if (!NILP (program)) |
| 1500 | coding_systems = Ffind_operation_coding_system (nargs + 1, args2); |
| 1501 | UNGCPRO; |
| 1502 | } |
| 1503 | if (CONSP (coding_systems)) |
| 1504 | val = XCDR (coding_systems); |
| 1505 | else if (CONSP (Vdefault_process_coding_system)) |
| 1506 | val = XCDR (Vdefault_process_coding_system); |
| 1507 | } |
| 1508 | pset_encode_coding_system (XPROCESS (proc), val); |
| 1509 | /* Note: At this moment, the above coding system may leave |
| 1510 | text-conversion or eol-conversion unspecified. They will be |
| 1511 | decided after we read output from the process and decode it by |
| 1512 | some coding system, or just before we actually send a text to |
| 1513 | the process. */ |
| 1514 | } |
| 1515 | |
| 1516 | |
| 1517 | pset_decoding_buf (XPROCESS (proc), empty_unibyte_string); |
| 1518 | XPROCESS (proc)->decoding_carryover = 0; |
| 1519 | pset_encoding_buf (XPROCESS (proc), empty_unibyte_string); |
| 1520 | |
| 1521 | XPROCESS (proc)->inherit_coding_system_flag |
| 1522 | = !(NILP (buffer) || !inherit_process_coding_system); |
| 1523 | |
| 1524 | if (!NILP (program)) |
| 1525 | { |
| 1526 | /* If program file name is not absolute, search our path for it. |
| 1527 | Put the name we will really use in TEM. */ |
| 1528 | if (!IS_DIRECTORY_SEP (SREF (program, 0)) |
| 1529 | && !(SCHARS (program) > 1 |
| 1530 | && IS_DEVICE_SEP (SREF (program, 1)))) |
| 1531 | { |
| 1532 | struct gcpro gcpro1, gcpro2, gcpro3, gcpro4; |
| 1533 | |
| 1534 | tem = Qnil; |
| 1535 | GCPRO4 (name, program, buffer, current_dir); |
| 1536 | openp (Vexec_path, program, Vexec_suffixes, &tem, |
| 1537 | make_number (X_OK), false); |
| 1538 | UNGCPRO; |
| 1539 | if (NILP (tem)) |
| 1540 | report_file_error ("Searching for program", program); |
| 1541 | tem = Fexpand_file_name (tem, Qnil); |
| 1542 | } |
| 1543 | else |
| 1544 | { |
| 1545 | if (!NILP (Ffile_directory_p (program))) |
| 1546 | error ("Specified program for new process is a directory"); |
| 1547 | tem = program; |
| 1548 | } |
| 1549 | |
| 1550 | /* If program file name starts with /: for quoting a magic name, |
| 1551 | discard that. */ |
| 1552 | if (SBYTES (tem) > 2 && SREF (tem, 0) == '/' |
| 1553 | && SREF (tem, 1) == ':') |
| 1554 | tem = Fsubstring (tem, make_number (2), Qnil); |
| 1555 | |
| 1556 | { |
| 1557 | Lisp_Object arg_encoding = Qnil; |
| 1558 | struct gcpro gcpro1; |
| 1559 | GCPRO1 (tem); |
| 1560 | |
| 1561 | /* Encode the file name and put it in NEW_ARGV. |
| 1562 | That's where the child will use it to execute the program. */ |
| 1563 | tem = list1 (ENCODE_FILE (tem)); |
| 1564 | |
| 1565 | /* Here we encode arguments by the coding system used for sending |
| 1566 | data to the process. We don't support using different coding |
| 1567 | systems for encoding arguments and for encoding data sent to the |
| 1568 | process. */ |
| 1569 | |
| 1570 | for (i = 3; i < nargs; i++) |
| 1571 | { |
| 1572 | tem = Fcons (args[i], tem); |
| 1573 | CHECK_STRING (XCAR (tem)); |
| 1574 | if (STRING_MULTIBYTE (XCAR (tem))) |
| 1575 | { |
| 1576 | if (NILP (arg_encoding)) |
| 1577 | arg_encoding = (complement_process_encoding_system |
| 1578 | (XPROCESS (proc)->encode_coding_system)); |
| 1579 | XSETCAR (tem, |
| 1580 | code_convert_string_norecord |
| 1581 | (XCAR (tem), arg_encoding, 1)); |
| 1582 | } |
| 1583 | } |
| 1584 | |
| 1585 | UNGCPRO; |
| 1586 | } |
| 1587 | |
| 1588 | /* Now that everything is encoded we can collect the strings into |
| 1589 | NEW_ARGV. */ |
| 1590 | new_argv = alloca ((nargs - 1) * sizeof *new_argv); |
| 1591 | new_argv[nargs - 2] = 0; |
| 1592 | |
| 1593 | for (i = nargs - 2; i-- != 0; ) |
| 1594 | { |
| 1595 | new_argv[i] = SDATA (XCAR (tem)); |
| 1596 | tem = XCDR (tem); |
| 1597 | } |
| 1598 | |
| 1599 | create_process (proc, (char **) new_argv, current_dir); |
| 1600 | } |
| 1601 | else |
| 1602 | create_pty (proc); |
| 1603 | |
| 1604 | return unbind_to (count, proc); |
| 1605 | } |
| 1606 | |
| 1607 | /* This function is the unwind_protect form for Fstart_process. If |
| 1608 | PROC doesn't have its pid set, then we know someone has signaled |
| 1609 | an error and the process wasn't started successfully, so we should |
| 1610 | remove it from the process list. */ |
| 1611 | static void |
| 1612 | start_process_unwind (Lisp_Object proc) |
| 1613 | { |
| 1614 | if (!PROCESSP (proc)) |
| 1615 | emacs_abort (); |
| 1616 | |
| 1617 | /* Was PROC started successfully? |
| 1618 | -2 is used for a pty with no process, eg for gdb. */ |
| 1619 | if (XPROCESS (proc)->pid <= 0 && XPROCESS (proc)->pid != -2) |
| 1620 | remove_process (proc); |
| 1621 | } |
| 1622 | |
| 1623 | /* If *FD_ADDR is nonnegative, close it, and mark it as closed. */ |
| 1624 | |
| 1625 | static void |
| 1626 | close_process_fd (int *fd_addr) |
| 1627 | { |
| 1628 | int fd = *fd_addr; |
| 1629 | if (0 <= fd) |
| 1630 | { |
| 1631 | *fd_addr = -1; |
| 1632 | emacs_close (fd); |
| 1633 | } |
| 1634 | } |
| 1635 | |
| 1636 | /* Indexes of file descriptors in open_fds. */ |
| 1637 | enum |
| 1638 | { |
| 1639 | /* The pipe from Emacs to its subprocess. */ |
| 1640 | SUBPROCESS_STDIN, |
| 1641 | WRITE_TO_SUBPROCESS, |
| 1642 | |
| 1643 | /* The main pipe from the subprocess to Emacs. */ |
| 1644 | READ_FROM_SUBPROCESS, |
| 1645 | SUBPROCESS_STDOUT, |
| 1646 | |
| 1647 | /* The pipe from the subprocess to Emacs that is closed when the |
| 1648 | subprocess execs. */ |
| 1649 | READ_FROM_EXEC_MONITOR, |
| 1650 | EXEC_MONITOR_OUTPUT |
| 1651 | }; |
| 1652 | |
| 1653 | verify (PROCESS_OPEN_FDS == EXEC_MONITOR_OUTPUT + 1); |
| 1654 | |
| 1655 | static void |
| 1656 | create_process (Lisp_Object process, char **new_argv, Lisp_Object current_dir) |
| 1657 | { |
| 1658 | struct Lisp_Process *p = XPROCESS (process); |
| 1659 | int inchannel, outchannel; |
| 1660 | pid_t pid; |
| 1661 | int vfork_errno; |
| 1662 | int forkin, forkout; |
| 1663 | bool pty_flag = 0; |
| 1664 | char pty_name[PTY_NAME_SIZE]; |
| 1665 | Lisp_Object lisp_pty_name = Qnil; |
| 1666 | |
| 1667 | inchannel = outchannel = -1; |
| 1668 | |
| 1669 | if (!NILP (Vprocess_connection_type)) |
| 1670 | outchannel = inchannel = allocate_pty (pty_name); |
| 1671 | |
| 1672 | if (inchannel >= 0) |
| 1673 | { |
| 1674 | p->open_fd[READ_FROM_SUBPROCESS] = inchannel; |
| 1675 | #if ! defined (USG) || defined (USG_SUBTTY_WORKS) |
| 1676 | /* On most USG systems it does not work to open the pty's tty here, |
| 1677 | then close it and reopen it in the child. */ |
| 1678 | /* Don't let this terminal become our controlling terminal |
| 1679 | (in case we don't have one). */ |
| 1680 | forkout = forkin = emacs_open (pty_name, O_RDWR | O_NOCTTY, 0); |
| 1681 | if (forkin < 0) |
| 1682 | report_file_error ("Opening pty", Qnil); |
| 1683 | p->open_fd[SUBPROCESS_STDIN] = forkin; |
| 1684 | #else |
| 1685 | forkin = forkout = -1; |
| 1686 | #endif /* not USG, or USG_SUBTTY_WORKS */ |
| 1687 | pty_flag = 1; |
| 1688 | lisp_pty_name = build_string (pty_name); |
| 1689 | } |
| 1690 | else |
| 1691 | { |
| 1692 | if (emacs_pipe (p->open_fd + SUBPROCESS_STDIN) != 0 |
| 1693 | || emacs_pipe (p->open_fd + READ_FROM_SUBPROCESS) != 0) |
| 1694 | report_file_error ("Creating pipe", Qnil); |
| 1695 | forkin = p->open_fd[SUBPROCESS_STDIN]; |
| 1696 | outchannel = p->open_fd[WRITE_TO_SUBPROCESS]; |
| 1697 | inchannel = p->open_fd[READ_FROM_SUBPROCESS]; |
| 1698 | forkout = p->open_fd[SUBPROCESS_STDOUT]; |
| 1699 | } |
| 1700 | |
| 1701 | #ifndef WINDOWSNT |
| 1702 | if (emacs_pipe (p->open_fd + READ_FROM_EXEC_MONITOR) != 0) |
| 1703 | report_file_error ("Creating pipe", Qnil); |
| 1704 | #endif |
| 1705 | |
| 1706 | fcntl (inchannel, F_SETFL, O_NONBLOCK); |
| 1707 | fcntl (outchannel, F_SETFL, O_NONBLOCK); |
| 1708 | |
| 1709 | /* Record this as an active process, with its channels. */ |
| 1710 | chan_process[inchannel] = process; |
| 1711 | p->infd = inchannel; |
| 1712 | p->outfd = outchannel; |
| 1713 | |
| 1714 | /* Previously we recorded the tty descriptor used in the subprocess. |
| 1715 | It was only used for getting the foreground tty process, so now |
| 1716 | we just reopen the device (see emacs_get_tty_pgrp) as this is |
| 1717 | more portable (see USG_SUBTTY_WORKS above). */ |
| 1718 | |
| 1719 | p->pty_flag = pty_flag; |
| 1720 | pset_status (p, Qrun); |
| 1721 | |
| 1722 | FD_SET (inchannel, &input_wait_mask); |
| 1723 | FD_SET (inchannel, &non_keyboard_wait_mask); |
| 1724 | if (inchannel > max_process_desc) |
| 1725 | max_process_desc = inchannel; |
| 1726 | |
| 1727 | /* This may signal an error. */ |
| 1728 | setup_process_coding_systems (process); |
| 1729 | |
| 1730 | block_input (); |
| 1731 | block_child_signal (); |
| 1732 | |
| 1733 | #ifndef WINDOWSNT |
| 1734 | /* vfork, and prevent local vars from being clobbered by the vfork. */ |
| 1735 | { |
| 1736 | Lisp_Object volatile current_dir_volatile = current_dir; |
| 1737 | Lisp_Object volatile lisp_pty_name_volatile = lisp_pty_name; |
| 1738 | char **volatile new_argv_volatile = new_argv; |
| 1739 | int volatile forkin_volatile = forkin; |
| 1740 | int volatile forkout_volatile = forkout; |
| 1741 | struct Lisp_Process *p_volatile = p; |
| 1742 | |
| 1743 | pid = vfork (); |
| 1744 | |
| 1745 | current_dir = current_dir_volatile; |
| 1746 | lisp_pty_name = lisp_pty_name_volatile; |
| 1747 | new_argv = new_argv_volatile; |
| 1748 | forkin = forkin_volatile; |
| 1749 | forkout = forkout_volatile; |
| 1750 | p = p_volatile; |
| 1751 | |
| 1752 | pty_flag = p->pty_flag; |
| 1753 | } |
| 1754 | |
| 1755 | if (pid == 0) |
| 1756 | #endif /* not WINDOWSNT */ |
| 1757 | { |
| 1758 | int xforkin = forkin; |
| 1759 | int xforkout = forkout; |
| 1760 | |
| 1761 | /* Make the pty be the controlling terminal of the process. */ |
| 1762 | #ifdef HAVE_PTYS |
| 1763 | /* First, disconnect its current controlling terminal. */ |
| 1764 | /* We tried doing setsid only if pty_flag, but it caused |
| 1765 | process_set_signal to fail on SGI when using a pipe. */ |
| 1766 | setsid (); |
| 1767 | /* Make the pty's terminal the controlling terminal. */ |
| 1768 | if (pty_flag && xforkin >= 0) |
| 1769 | { |
| 1770 | #ifdef TIOCSCTTY |
| 1771 | /* We ignore the return value |
| 1772 | because faith@cs.unc.edu says that is necessary on Linux. */ |
| 1773 | ioctl (xforkin, TIOCSCTTY, 0); |
| 1774 | #endif |
| 1775 | } |
| 1776 | #if defined (LDISC1) |
| 1777 | if (pty_flag && xforkin >= 0) |
| 1778 | { |
| 1779 | struct termios t; |
| 1780 | tcgetattr (xforkin, &t); |
| 1781 | t.c_lflag = LDISC1; |
| 1782 | if (tcsetattr (xforkin, TCSANOW, &t) < 0) |
| 1783 | emacs_perror ("create_process/tcsetattr LDISC1"); |
| 1784 | } |
| 1785 | #else |
| 1786 | #if defined (NTTYDISC) && defined (TIOCSETD) |
| 1787 | if (pty_flag && xforkin >= 0) |
| 1788 | { |
| 1789 | /* Use new line discipline. */ |
| 1790 | int ldisc = NTTYDISC; |
| 1791 | ioctl (xforkin, TIOCSETD, &ldisc); |
| 1792 | } |
| 1793 | #endif |
| 1794 | #endif |
| 1795 | #ifdef TIOCNOTTY |
| 1796 | /* In 4.3BSD, the TIOCSPGRP bug has been fixed, and now you |
| 1797 | can do TIOCSPGRP only to the process's controlling tty. */ |
| 1798 | if (pty_flag) |
| 1799 | { |
| 1800 | /* I wonder: would just ioctl (0, TIOCNOTTY, 0) work here? |
| 1801 | I can't test it since I don't have 4.3. */ |
| 1802 | int j = emacs_open ("/dev/tty", O_RDWR, 0); |
| 1803 | if (j >= 0) |
| 1804 | { |
| 1805 | ioctl (j, TIOCNOTTY, 0); |
| 1806 | emacs_close (j); |
| 1807 | } |
| 1808 | } |
| 1809 | #endif /* TIOCNOTTY */ |
| 1810 | |
| 1811 | #if !defined (DONT_REOPEN_PTY) |
| 1812 | /*** There is a suggestion that this ought to be a |
| 1813 | conditional on TIOCSPGRP, or !defined TIOCSCTTY. |
| 1814 | Trying the latter gave the wrong results on Debian GNU/Linux 1.1; |
| 1815 | that system does seem to need this code, even though |
| 1816 | both TIOCSCTTY is defined. */ |
| 1817 | /* Now close the pty (if we had it open) and reopen it. |
| 1818 | This makes the pty the controlling terminal of the subprocess. */ |
| 1819 | if (pty_flag) |
| 1820 | { |
| 1821 | |
| 1822 | /* I wonder if emacs_close (emacs_open (SSDATA (lisp_pty_name), ...)) |
| 1823 | would work? */ |
| 1824 | if (xforkin >= 0) |
| 1825 | emacs_close (xforkin); |
| 1826 | xforkout = xforkin = emacs_open (SSDATA (lisp_pty_name), O_RDWR, 0); |
| 1827 | |
| 1828 | if (xforkin < 0) |
| 1829 | { |
| 1830 | emacs_perror (SSDATA (lisp_pty_name)); |
| 1831 | _exit (EXIT_CANCELED); |
| 1832 | } |
| 1833 | |
| 1834 | } |
| 1835 | #endif /* not DONT_REOPEN_PTY */ |
| 1836 | |
| 1837 | #ifdef SETUP_SLAVE_PTY |
| 1838 | if (pty_flag) |
| 1839 | { |
| 1840 | SETUP_SLAVE_PTY; |
| 1841 | } |
| 1842 | #endif /* SETUP_SLAVE_PTY */ |
| 1843 | #endif /* HAVE_PTYS */ |
| 1844 | |
| 1845 | signal (SIGINT, SIG_DFL); |
| 1846 | signal (SIGQUIT, SIG_DFL); |
| 1847 | #ifdef SIGPROF |
| 1848 | signal (SIGPROF, SIG_DFL); |
| 1849 | #endif |
| 1850 | |
| 1851 | /* Emacs ignores SIGPIPE, but the child should not. */ |
| 1852 | signal (SIGPIPE, SIG_DFL); |
| 1853 | |
| 1854 | /* Stop blocking SIGCHLD in the child. */ |
| 1855 | unblock_child_signal (); |
| 1856 | |
| 1857 | if (pty_flag) |
| 1858 | child_setup_tty (xforkout); |
| 1859 | #ifdef WINDOWSNT |
| 1860 | pid = child_setup (xforkin, xforkout, xforkout, new_argv, 1, current_dir); |
| 1861 | #else /* not WINDOWSNT */ |
| 1862 | child_setup (xforkin, xforkout, xforkout, new_argv, 1, current_dir); |
| 1863 | #endif /* not WINDOWSNT */ |
| 1864 | } |
| 1865 | |
| 1866 | /* Back in the parent process. */ |
| 1867 | |
| 1868 | vfork_errno = errno; |
| 1869 | p->pid = pid; |
| 1870 | if (pid >= 0) |
| 1871 | p->alive = 1; |
| 1872 | |
| 1873 | /* Stop blocking in the parent. */ |
| 1874 | unblock_child_signal (); |
| 1875 | unblock_input (); |
| 1876 | |
| 1877 | if (pid < 0) |
| 1878 | report_file_errno ("Doing vfork", Qnil, vfork_errno); |
| 1879 | else |
| 1880 | { |
| 1881 | /* vfork succeeded. */ |
| 1882 | |
| 1883 | /* Close the pipe ends that the child uses, or the child's pty. */ |
| 1884 | close_process_fd (&p->open_fd[SUBPROCESS_STDIN]); |
| 1885 | close_process_fd (&p->open_fd[SUBPROCESS_STDOUT]); |
| 1886 | |
| 1887 | #ifdef WINDOWSNT |
| 1888 | register_child (pid, inchannel); |
| 1889 | #endif /* WINDOWSNT */ |
| 1890 | |
| 1891 | pset_tty_name (p, lisp_pty_name); |
| 1892 | |
| 1893 | #ifndef WINDOWSNT |
| 1894 | /* Wait for child_setup to complete in case that vfork is |
| 1895 | actually defined as fork. The descriptor |
| 1896 | XPROCESS (proc)->open_fd[EXEC_MONITOR_OUTPUT] |
| 1897 | of a pipe is closed at the child side either by close-on-exec |
| 1898 | on successful execve or the _exit call in child_setup. */ |
| 1899 | { |
| 1900 | char dummy; |
| 1901 | |
| 1902 | close_process_fd (&p->open_fd[EXEC_MONITOR_OUTPUT]); |
| 1903 | emacs_read (p->open_fd[READ_FROM_EXEC_MONITOR], &dummy, 1); |
| 1904 | close_process_fd (&p->open_fd[READ_FROM_EXEC_MONITOR]); |
| 1905 | } |
| 1906 | #endif |
| 1907 | } |
| 1908 | } |
| 1909 | |
| 1910 | static void |
| 1911 | create_pty (Lisp_Object process) |
| 1912 | { |
| 1913 | struct Lisp_Process *p = XPROCESS (process); |
| 1914 | char pty_name[PTY_NAME_SIZE]; |
| 1915 | int pty_fd = NILP (Vprocess_connection_type) ? -1 : allocate_pty (pty_name); |
| 1916 | |
| 1917 | if (pty_fd >= 0) |
| 1918 | { |
| 1919 | p->open_fd[SUBPROCESS_STDIN] = pty_fd; |
| 1920 | #if ! defined (USG) || defined (USG_SUBTTY_WORKS) |
| 1921 | /* On most USG systems it does not work to open the pty's tty here, |
| 1922 | then close it and reopen it in the child. */ |
| 1923 | /* Don't let this terminal become our controlling terminal |
| 1924 | (in case we don't have one). */ |
| 1925 | int forkout = emacs_open (pty_name, O_RDWR | O_NOCTTY, 0); |
| 1926 | if (forkout < 0) |
| 1927 | report_file_error ("Opening pty", Qnil); |
| 1928 | p->open_fd[WRITE_TO_SUBPROCESS] = forkout; |
| 1929 | #if defined (DONT_REOPEN_PTY) |
| 1930 | /* In the case that vfork is defined as fork, the parent process |
| 1931 | (Emacs) may send some data before the child process completes |
| 1932 | tty options setup. So we setup tty before forking. */ |
| 1933 | child_setup_tty (forkout); |
| 1934 | #endif /* DONT_REOPEN_PTY */ |
| 1935 | #endif /* not USG, or USG_SUBTTY_WORKS */ |
| 1936 | |
| 1937 | fcntl (pty_fd, F_SETFL, O_NONBLOCK); |
| 1938 | |
| 1939 | /* Record this as an active process, with its channels. |
| 1940 | As a result, child_setup will close Emacs's side of the pipes. */ |
| 1941 | chan_process[pty_fd] = process; |
| 1942 | p->infd = pty_fd; |
| 1943 | p->outfd = pty_fd; |
| 1944 | |
| 1945 | /* Previously we recorded the tty descriptor used in the subprocess. |
| 1946 | It was only used for getting the foreground tty process, so now |
| 1947 | we just reopen the device (see emacs_get_tty_pgrp) as this is |
| 1948 | more portable (see USG_SUBTTY_WORKS above). */ |
| 1949 | |
| 1950 | p->pty_flag = 1; |
| 1951 | pset_status (p, Qrun); |
| 1952 | setup_process_coding_systems (process); |
| 1953 | |
| 1954 | FD_SET (pty_fd, &input_wait_mask); |
| 1955 | FD_SET (pty_fd, &non_keyboard_wait_mask); |
| 1956 | if (pty_fd > max_process_desc) |
| 1957 | max_process_desc = pty_fd; |
| 1958 | |
| 1959 | pset_tty_name (p, build_string (pty_name)); |
| 1960 | } |
| 1961 | |
| 1962 | p->pid = -2; |
| 1963 | } |
| 1964 | |
| 1965 | \f |
| 1966 | /* Convert an internal struct sockaddr to a lisp object (vector or string). |
| 1967 | The address family of sa is not included in the result. */ |
| 1968 | |
| 1969 | #ifndef WINDOWSNT |
| 1970 | static |
| 1971 | #endif |
| 1972 | Lisp_Object |
| 1973 | conv_sockaddr_to_lisp (struct sockaddr *sa, int len) |
| 1974 | { |
| 1975 | Lisp_Object address; |
| 1976 | int i; |
| 1977 | unsigned char *cp; |
| 1978 | register struct Lisp_Vector *p; |
| 1979 | |
| 1980 | /* Workaround for a bug in getsockname on BSD: Names bound to |
| 1981 | sockets in the UNIX domain are inaccessible; getsockname returns |
| 1982 | a zero length name. */ |
| 1983 | if (len < offsetof (struct sockaddr, sa_family) + sizeof (sa->sa_family)) |
| 1984 | return empty_unibyte_string; |
| 1985 | |
| 1986 | switch (sa->sa_family) |
| 1987 | { |
| 1988 | case AF_INET: |
| 1989 | { |
| 1990 | struct sockaddr_in *sin = (struct sockaddr_in *) sa; |
| 1991 | len = sizeof (sin->sin_addr) + 1; |
| 1992 | address = Fmake_vector (make_number (len), Qnil); |
| 1993 | p = XVECTOR (address); |
| 1994 | p->contents[--len] = make_number (ntohs (sin->sin_port)); |
| 1995 | cp = (unsigned char *) &sin->sin_addr; |
| 1996 | break; |
| 1997 | } |
| 1998 | #ifdef AF_INET6 |
| 1999 | case AF_INET6: |
| 2000 | { |
| 2001 | struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) sa; |
| 2002 | uint16_t *ip6 = (uint16_t *) &sin6->sin6_addr; |
| 2003 | len = sizeof (sin6->sin6_addr)/2 + 1; |
| 2004 | address = Fmake_vector (make_number (len), Qnil); |
| 2005 | p = XVECTOR (address); |
| 2006 | p->contents[--len] = make_number (ntohs (sin6->sin6_port)); |
| 2007 | for (i = 0; i < len; i++) |
| 2008 | p->contents[i] = make_number (ntohs (ip6[i])); |
| 2009 | return address; |
| 2010 | } |
| 2011 | #endif |
| 2012 | #ifdef HAVE_LOCAL_SOCKETS |
| 2013 | case AF_LOCAL: |
| 2014 | { |
| 2015 | struct sockaddr_un *sockun = (struct sockaddr_un *) sa; |
| 2016 | ptrdiff_t name_length = len - offsetof (struct sockaddr_un, sun_path); |
| 2017 | /* If the first byte is NUL, the name is a Linux abstract |
| 2018 | socket name, and the name can contain embedded NULs. If |
| 2019 | it's not, we have a NUL-terminated string. Be careful not |
| 2020 | to walk past the end of the object looking for the name |
| 2021 | terminator, however. */ |
| 2022 | if (name_length > 0 && sockun->sun_path[0] != '\0') |
| 2023 | { |
| 2024 | const char* terminator = |
| 2025 | memchr (sockun->sun_path, '\0', name_length); |
| 2026 | |
| 2027 | if (terminator) |
| 2028 | name_length = terminator - (const char*) sockun->sun_path; |
| 2029 | } |
| 2030 | |
| 2031 | return make_unibyte_string (sockun->sun_path, name_length); |
| 2032 | } |
| 2033 | #endif |
| 2034 | default: |
| 2035 | len -= offsetof (struct sockaddr, sa_family) + sizeof (sa->sa_family); |
| 2036 | address = Fcons (make_number (sa->sa_family), |
| 2037 | Fmake_vector (make_number (len), Qnil)); |
| 2038 | p = XVECTOR (XCDR (address)); |
| 2039 | cp = (unsigned char *) &sa->sa_family + sizeof (sa->sa_family); |
| 2040 | break; |
| 2041 | } |
| 2042 | |
| 2043 | i = 0; |
| 2044 | while (i < len) |
| 2045 | p->contents[i++] = make_number (*cp++); |
| 2046 | |
| 2047 | return address; |
| 2048 | } |
| 2049 | |
| 2050 | |
| 2051 | /* Get family and required size for sockaddr structure to hold ADDRESS. */ |
| 2052 | |
| 2053 | static int |
| 2054 | get_lisp_to_sockaddr_size (Lisp_Object address, int *familyp) |
| 2055 | { |
| 2056 | register struct Lisp_Vector *p; |
| 2057 | |
| 2058 | if (VECTORP (address)) |
| 2059 | { |
| 2060 | p = XVECTOR (address); |
| 2061 | if (p->header.size == 5) |
| 2062 | { |
| 2063 | *familyp = AF_INET; |
| 2064 | return sizeof (struct sockaddr_in); |
| 2065 | } |
| 2066 | #ifdef AF_INET6 |
| 2067 | else if (p->header.size == 9) |
| 2068 | { |
| 2069 | *familyp = AF_INET6; |
| 2070 | return sizeof (struct sockaddr_in6); |
| 2071 | } |
| 2072 | #endif |
| 2073 | } |
| 2074 | #ifdef HAVE_LOCAL_SOCKETS |
| 2075 | else if (STRINGP (address)) |
| 2076 | { |
| 2077 | *familyp = AF_LOCAL; |
| 2078 | return sizeof (struct sockaddr_un); |
| 2079 | } |
| 2080 | #endif |
| 2081 | else if (CONSP (address) && TYPE_RANGED_INTEGERP (int, XCAR (address)) |
| 2082 | && VECTORP (XCDR (address))) |
| 2083 | { |
| 2084 | struct sockaddr *sa; |
| 2085 | *familyp = XINT (XCAR (address)); |
| 2086 | p = XVECTOR (XCDR (address)); |
| 2087 | return p->header.size + sizeof (sa->sa_family); |
| 2088 | } |
| 2089 | return 0; |
| 2090 | } |
| 2091 | |
| 2092 | /* Convert an address object (vector or string) to an internal sockaddr. |
| 2093 | |
| 2094 | The address format has been basically validated by |
| 2095 | get_lisp_to_sockaddr_size, but this does not mean FAMILY is valid; |
| 2096 | it could have come from user data. So if FAMILY is not valid, |
| 2097 | we return after zeroing *SA. */ |
| 2098 | |
| 2099 | static void |
| 2100 | conv_lisp_to_sockaddr (int family, Lisp_Object address, struct sockaddr *sa, int len) |
| 2101 | { |
| 2102 | register struct Lisp_Vector *p; |
| 2103 | register unsigned char *cp = NULL; |
| 2104 | register int i; |
| 2105 | EMACS_INT hostport; |
| 2106 | |
| 2107 | memset (sa, 0, len); |
| 2108 | |
| 2109 | if (VECTORP (address)) |
| 2110 | { |
| 2111 | p = XVECTOR (address); |
| 2112 | if (family == AF_INET) |
| 2113 | { |
| 2114 | struct sockaddr_in *sin = (struct sockaddr_in *) sa; |
| 2115 | len = sizeof (sin->sin_addr) + 1; |
| 2116 | hostport = XINT (p->contents[--len]); |
| 2117 | sin->sin_port = htons (hostport); |
| 2118 | cp = (unsigned char *)&sin->sin_addr; |
| 2119 | sa->sa_family = family; |
| 2120 | } |
| 2121 | #ifdef AF_INET6 |
| 2122 | else if (family == AF_INET6) |
| 2123 | { |
| 2124 | struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) sa; |
| 2125 | uint16_t *ip6 = (uint16_t *)&sin6->sin6_addr; |
| 2126 | len = sizeof (sin6->sin6_addr) + 1; |
| 2127 | hostport = XINT (p->contents[--len]); |
| 2128 | sin6->sin6_port = htons (hostport); |
| 2129 | for (i = 0; i < len; i++) |
| 2130 | if (INTEGERP (p->contents[i])) |
| 2131 | { |
| 2132 | int j = XFASTINT (p->contents[i]) & 0xffff; |
| 2133 | ip6[i] = ntohs (j); |
| 2134 | } |
| 2135 | sa->sa_family = family; |
| 2136 | return; |
| 2137 | } |
| 2138 | #endif |
| 2139 | else |
| 2140 | return; |
| 2141 | } |
| 2142 | else if (STRINGP (address)) |
| 2143 | { |
| 2144 | #ifdef HAVE_LOCAL_SOCKETS |
| 2145 | if (family == AF_LOCAL) |
| 2146 | { |
| 2147 | struct sockaddr_un *sockun = (struct sockaddr_un *) sa; |
| 2148 | cp = SDATA (address); |
| 2149 | for (i = 0; i < sizeof (sockun->sun_path) && *cp; i++) |
| 2150 | sockun->sun_path[i] = *cp++; |
| 2151 | sa->sa_family = family; |
| 2152 | } |
| 2153 | #endif |
| 2154 | return; |
| 2155 | } |
| 2156 | else |
| 2157 | { |
| 2158 | p = XVECTOR (XCDR (address)); |
| 2159 | cp = (unsigned char *)sa + sizeof (sa->sa_family); |
| 2160 | } |
| 2161 | |
| 2162 | for (i = 0; i < len; i++) |
| 2163 | if (INTEGERP (p->contents[i])) |
| 2164 | *cp++ = XFASTINT (p->contents[i]) & 0xff; |
| 2165 | } |
| 2166 | |
| 2167 | #ifdef DATAGRAM_SOCKETS |
| 2168 | DEFUN ("process-datagram-address", Fprocess_datagram_address, Sprocess_datagram_address, |
| 2169 | 1, 1, 0, |
| 2170 | doc: /* Get the current datagram address associated with PROCESS. */) |
| 2171 | (Lisp_Object process) |
| 2172 | { |
| 2173 | int channel; |
| 2174 | |
| 2175 | CHECK_PROCESS (process); |
| 2176 | |
| 2177 | if (!DATAGRAM_CONN_P (process)) |
| 2178 | return Qnil; |
| 2179 | |
| 2180 | channel = XPROCESS (process)->infd; |
| 2181 | return conv_sockaddr_to_lisp (datagram_address[channel].sa, |
| 2182 | datagram_address[channel].len); |
| 2183 | } |
| 2184 | |
| 2185 | DEFUN ("set-process-datagram-address", Fset_process_datagram_address, Sset_process_datagram_address, |
| 2186 | 2, 2, 0, |
| 2187 | doc: /* Set the datagram address for PROCESS to ADDRESS. |
| 2188 | Returns nil upon error setting address, ADDRESS otherwise. */) |
| 2189 | (Lisp_Object process, Lisp_Object address) |
| 2190 | { |
| 2191 | int channel; |
| 2192 | int family, len; |
| 2193 | |
| 2194 | CHECK_PROCESS (process); |
| 2195 | |
| 2196 | if (!DATAGRAM_CONN_P (process)) |
| 2197 | return Qnil; |
| 2198 | |
| 2199 | channel = XPROCESS (process)->infd; |
| 2200 | |
| 2201 | len = get_lisp_to_sockaddr_size (address, &family); |
| 2202 | if (len == 0 || datagram_address[channel].len != len) |
| 2203 | return Qnil; |
| 2204 | conv_lisp_to_sockaddr (family, address, datagram_address[channel].sa, len); |
| 2205 | return address; |
| 2206 | } |
| 2207 | #endif |
| 2208 | \f |
| 2209 | |
| 2210 | static const struct socket_options { |
| 2211 | /* The name of this option. Should be lowercase version of option |
| 2212 | name without SO_ prefix. */ |
| 2213 | const char *name; |
| 2214 | /* Option level SOL_... */ |
| 2215 | int optlevel; |
| 2216 | /* Option number SO_... */ |
| 2217 | int optnum; |
| 2218 | enum { SOPT_UNKNOWN, SOPT_BOOL, SOPT_INT, SOPT_IFNAME, SOPT_LINGER } opttype; |
| 2219 | enum { OPIX_NONE=0, OPIX_MISC=1, OPIX_REUSEADDR=2 } optbit; |
| 2220 | } socket_options[] = |
| 2221 | { |
| 2222 | #ifdef SO_BINDTODEVICE |
| 2223 | { ":bindtodevice", SOL_SOCKET, SO_BINDTODEVICE, SOPT_IFNAME, OPIX_MISC }, |
| 2224 | #endif |
| 2225 | #ifdef SO_BROADCAST |
| 2226 | { ":broadcast", SOL_SOCKET, SO_BROADCAST, SOPT_BOOL, OPIX_MISC }, |
| 2227 | #endif |
| 2228 | #ifdef SO_DONTROUTE |
| 2229 | { ":dontroute", SOL_SOCKET, SO_DONTROUTE, SOPT_BOOL, OPIX_MISC }, |
| 2230 | #endif |
| 2231 | #ifdef SO_KEEPALIVE |
| 2232 | { ":keepalive", SOL_SOCKET, SO_KEEPALIVE, SOPT_BOOL, OPIX_MISC }, |
| 2233 | #endif |
| 2234 | #ifdef SO_LINGER |
| 2235 | { ":linger", SOL_SOCKET, SO_LINGER, SOPT_LINGER, OPIX_MISC }, |
| 2236 | #endif |
| 2237 | #ifdef SO_OOBINLINE |
| 2238 | { ":oobinline", SOL_SOCKET, SO_OOBINLINE, SOPT_BOOL, OPIX_MISC }, |
| 2239 | #endif |
| 2240 | #ifdef SO_PRIORITY |
| 2241 | { ":priority", SOL_SOCKET, SO_PRIORITY, SOPT_INT, OPIX_MISC }, |
| 2242 | #endif |
| 2243 | #ifdef SO_REUSEADDR |
| 2244 | { ":reuseaddr", SOL_SOCKET, SO_REUSEADDR, SOPT_BOOL, OPIX_REUSEADDR }, |
| 2245 | #endif |
| 2246 | { 0, 0, 0, SOPT_UNKNOWN, OPIX_NONE } |
| 2247 | }; |
| 2248 | |
| 2249 | /* Set option OPT to value VAL on socket S. |
| 2250 | |
| 2251 | Returns (1<<socket_options[OPT].optbit) if option is known, 0 otherwise. |
| 2252 | Signals an error if setting a known option fails. |
| 2253 | */ |
| 2254 | |
| 2255 | static int |
| 2256 | set_socket_option (int s, Lisp_Object opt, Lisp_Object val) |
| 2257 | { |
| 2258 | char *name; |
| 2259 | const struct socket_options *sopt; |
| 2260 | int ret = 0; |
| 2261 | |
| 2262 | CHECK_SYMBOL (opt); |
| 2263 | |
| 2264 | name = SSDATA (SYMBOL_NAME (opt)); |
| 2265 | for (sopt = socket_options; sopt->name; sopt++) |
| 2266 | if (strcmp (name, sopt->name) == 0) |
| 2267 | break; |
| 2268 | |
| 2269 | switch (sopt->opttype) |
| 2270 | { |
| 2271 | case SOPT_BOOL: |
| 2272 | { |
| 2273 | int optval; |
| 2274 | optval = NILP (val) ? 0 : 1; |
| 2275 | ret = setsockopt (s, sopt->optlevel, sopt->optnum, |
| 2276 | &optval, sizeof (optval)); |
| 2277 | break; |
| 2278 | } |
| 2279 | |
| 2280 | case SOPT_INT: |
| 2281 | { |
| 2282 | int optval; |
| 2283 | if (TYPE_RANGED_INTEGERP (int, val)) |
| 2284 | optval = XINT (val); |
| 2285 | else |
| 2286 | error ("Bad option value for %s", name); |
| 2287 | ret = setsockopt (s, sopt->optlevel, sopt->optnum, |
| 2288 | &optval, sizeof (optval)); |
| 2289 | break; |
| 2290 | } |
| 2291 | |
| 2292 | #ifdef SO_BINDTODEVICE |
| 2293 | case SOPT_IFNAME: |
| 2294 | { |
| 2295 | char devname[IFNAMSIZ+1]; |
| 2296 | |
| 2297 | /* This is broken, at least in the Linux 2.4 kernel. |
| 2298 | To unbind, the arg must be a zero integer, not the empty string. |
| 2299 | This should work on all systems. KFS. 2003-09-23. */ |
| 2300 | memset (devname, 0, sizeof devname); |
| 2301 | if (STRINGP (val)) |
| 2302 | { |
| 2303 | char *arg = SSDATA (val); |
| 2304 | int len = min (strlen (arg), IFNAMSIZ); |
| 2305 | memcpy (devname, arg, len); |
| 2306 | } |
| 2307 | else if (!NILP (val)) |
| 2308 | error ("Bad option value for %s", name); |
| 2309 | ret = setsockopt (s, sopt->optlevel, sopt->optnum, |
| 2310 | devname, IFNAMSIZ); |
| 2311 | break; |
| 2312 | } |
| 2313 | #endif |
| 2314 | |
| 2315 | #ifdef SO_LINGER |
| 2316 | case SOPT_LINGER: |
| 2317 | { |
| 2318 | struct linger linger; |
| 2319 | |
| 2320 | linger.l_onoff = 1; |
| 2321 | linger.l_linger = 0; |
| 2322 | if (TYPE_RANGED_INTEGERP (int, val)) |
| 2323 | linger.l_linger = XINT (val); |
| 2324 | else |
| 2325 | linger.l_onoff = NILP (val) ? 0 : 1; |
| 2326 | ret = setsockopt (s, sopt->optlevel, sopt->optnum, |
| 2327 | &linger, sizeof (linger)); |
| 2328 | break; |
| 2329 | } |
| 2330 | #endif |
| 2331 | |
| 2332 | default: |
| 2333 | return 0; |
| 2334 | } |
| 2335 | |
| 2336 | if (ret < 0) |
| 2337 | { |
| 2338 | int setsockopt_errno = errno; |
| 2339 | report_file_errno ("Cannot set network option", list2 (opt, val), |
| 2340 | setsockopt_errno); |
| 2341 | } |
| 2342 | |
| 2343 | return (1 << sopt->optbit); |
| 2344 | } |
| 2345 | |
| 2346 | |
| 2347 | DEFUN ("set-network-process-option", |
| 2348 | Fset_network_process_option, Sset_network_process_option, |
| 2349 | 3, 4, 0, |
| 2350 | doc: /* For network process PROCESS set option OPTION to value VALUE. |
| 2351 | See `make-network-process' for a list of options and values. |
| 2352 | If optional fourth arg NO-ERROR is non-nil, don't signal an error if |
| 2353 | OPTION is not a supported option, return nil instead; otherwise return t. */) |
| 2354 | (Lisp_Object process, Lisp_Object option, Lisp_Object value, Lisp_Object no_error) |
| 2355 | { |
| 2356 | int s; |
| 2357 | struct Lisp_Process *p; |
| 2358 | |
| 2359 | CHECK_PROCESS (process); |
| 2360 | p = XPROCESS (process); |
| 2361 | if (!NETCONN1_P (p)) |
| 2362 | error ("Process is not a network process"); |
| 2363 | |
| 2364 | s = p->infd; |
| 2365 | if (s < 0) |
| 2366 | error ("Process is not running"); |
| 2367 | |
| 2368 | if (set_socket_option (s, option, value)) |
| 2369 | { |
| 2370 | pset_childp (p, Fplist_put (p->childp, option, value)); |
| 2371 | return Qt; |
| 2372 | } |
| 2373 | |
| 2374 | if (NILP (no_error)) |
| 2375 | error ("Unknown or unsupported option"); |
| 2376 | |
| 2377 | return Qnil; |
| 2378 | } |
| 2379 | |
| 2380 | \f |
| 2381 | DEFUN ("serial-process-configure", |
| 2382 | Fserial_process_configure, |
| 2383 | Sserial_process_configure, |
| 2384 | 0, MANY, 0, |
| 2385 | doc: /* Configure speed, bytesize, etc. of a serial process. |
| 2386 | |
| 2387 | Arguments are specified as keyword/argument pairs. Attributes that |
| 2388 | are not given are re-initialized from the process's current |
| 2389 | configuration (available via the function `process-contact') or set to |
| 2390 | reasonable default values. The following arguments are defined: |
| 2391 | |
| 2392 | :process PROCESS |
| 2393 | :name NAME |
| 2394 | :buffer BUFFER |
| 2395 | :port PORT |
| 2396 | -- Any of these arguments can be given to identify the process that is |
| 2397 | to be configured. If none of these arguments is given, the current |
| 2398 | buffer's process is used. |
| 2399 | |
| 2400 | :speed SPEED -- SPEED is the speed of the serial port in bits per |
| 2401 | second, also called baud rate. Any value can be given for SPEED, but |
| 2402 | most serial ports work only at a few defined values between 1200 and |
| 2403 | 115200, with 9600 being the most common value. If SPEED is nil, the |
| 2404 | serial port is not configured any further, i.e., all other arguments |
| 2405 | are ignored. This may be useful for special serial ports such as |
| 2406 | Bluetooth-to-serial converters which can only be configured through AT |
| 2407 | commands. A value of nil for SPEED can be used only when passed |
| 2408 | through `make-serial-process' or `serial-term'. |
| 2409 | |
| 2410 | :bytesize BYTESIZE -- BYTESIZE is the number of bits per byte, which |
| 2411 | can be 7 or 8. If BYTESIZE is not given or nil, a value of 8 is used. |
| 2412 | |
| 2413 | :parity PARITY -- PARITY can be nil (don't use parity), the symbol |
| 2414 | `odd' (use odd parity), or the symbol `even' (use even parity). If |
| 2415 | PARITY is not given, no parity is used. |
| 2416 | |
| 2417 | :stopbits STOPBITS -- STOPBITS is the number of stopbits used to |
| 2418 | terminate a byte transmission. STOPBITS can be 1 or 2. If STOPBITS |
| 2419 | is not given or nil, 1 stopbit is used. |
| 2420 | |
| 2421 | :flowcontrol FLOWCONTROL -- FLOWCONTROL determines the type of |
| 2422 | flowcontrol to be used, which is either nil (don't use flowcontrol), |
| 2423 | the symbol `hw' (use RTS/CTS hardware flowcontrol), or the symbol `sw' |
| 2424 | \(use XON/XOFF software flowcontrol). If FLOWCONTROL is not given, no |
| 2425 | flowcontrol is used. |
| 2426 | |
| 2427 | `serial-process-configure' is called by `make-serial-process' for the |
| 2428 | initial configuration of the serial port. |
| 2429 | |
| 2430 | Examples: |
| 2431 | |
| 2432 | \(serial-process-configure :process "/dev/ttyS0" :speed 1200) |
| 2433 | |
| 2434 | \(serial-process-configure |
| 2435 | :buffer "COM1" :stopbits 1 :parity 'odd :flowcontrol 'hw) |
| 2436 | |
| 2437 | \(serial-process-configure :port "\\\\.\\COM13" :bytesize 7) |
| 2438 | |
| 2439 | usage: (serial-process-configure &rest ARGS) */) |
| 2440 | (ptrdiff_t nargs, Lisp_Object *args) |
| 2441 | { |
| 2442 | struct Lisp_Process *p; |
| 2443 | Lisp_Object contact = Qnil; |
| 2444 | Lisp_Object proc = Qnil; |
| 2445 | struct gcpro gcpro1; |
| 2446 | |
| 2447 | contact = Flist (nargs, args); |
| 2448 | GCPRO1 (contact); |
| 2449 | |
| 2450 | proc = Fplist_get (contact, QCprocess); |
| 2451 | if (NILP (proc)) |
| 2452 | proc = Fplist_get (contact, QCname); |
| 2453 | if (NILP (proc)) |
| 2454 | proc = Fplist_get (contact, QCbuffer); |
| 2455 | if (NILP (proc)) |
| 2456 | proc = Fplist_get (contact, QCport); |
| 2457 | proc = get_process (proc); |
| 2458 | p = XPROCESS (proc); |
| 2459 | if (!EQ (p->type, Qserial)) |
| 2460 | error ("Not a serial process"); |
| 2461 | |
| 2462 | if (NILP (Fplist_get (p->childp, QCspeed))) |
| 2463 | { |
| 2464 | UNGCPRO; |
| 2465 | return Qnil; |
| 2466 | } |
| 2467 | |
| 2468 | serial_configure (p, contact); |
| 2469 | |
| 2470 | UNGCPRO; |
| 2471 | return Qnil; |
| 2472 | } |
| 2473 | |
| 2474 | DEFUN ("make-serial-process", Fmake_serial_process, Smake_serial_process, |
| 2475 | 0, MANY, 0, |
| 2476 | doc: /* Create and return a serial port process. |
| 2477 | |
| 2478 | In Emacs, serial port connections are represented by process objects, |
| 2479 | so input and output work as for subprocesses, and `delete-process' |
| 2480 | closes a serial port connection. However, a serial process has no |
| 2481 | process id, it cannot be signaled, and the status codes are different |
| 2482 | from normal processes. |
| 2483 | |
| 2484 | `make-serial-process' creates a process and a buffer, on which you |
| 2485 | probably want to use `process-send-string'. Try \\[serial-term] for |
| 2486 | an interactive terminal. See below for examples. |
| 2487 | |
| 2488 | Arguments are specified as keyword/argument pairs. The following |
| 2489 | arguments are defined: |
| 2490 | |
| 2491 | :port PORT -- (mandatory) PORT is the path or name of the serial port. |
| 2492 | For example, this could be "/dev/ttyS0" on Unix. On Windows, this |
| 2493 | could be "COM1", or "\\\\.\\COM10" for ports higher than COM9 (double |
| 2494 | the backslashes in strings). |
| 2495 | |
| 2496 | :speed SPEED -- (mandatory) is handled by `serial-process-configure', |
| 2497 | which this function calls. |
| 2498 | |
| 2499 | :name NAME -- NAME is the name of the process. If NAME is not given, |
| 2500 | the value of PORT is used. |
| 2501 | |
| 2502 | :buffer BUFFER -- BUFFER is the buffer (or buffer-name) to associate |
| 2503 | with the process. Process output goes at the end of that buffer, |
| 2504 | unless you specify an output stream or filter function to handle the |
| 2505 | output. If BUFFER is not given, the value of NAME is used. |
| 2506 | |
| 2507 | :coding CODING -- If CODING is a symbol, it specifies the coding |
| 2508 | system used for both reading and writing for this process. If CODING |
| 2509 | is a cons (DECODING . ENCODING), DECODING is used for reading, and |
| 2510 | ENCODING is used for writing. |
| 2511 | |
| 2512 | :noquery BOOL -- When exiting Emacs, query the user if BOOL is nil and |
| 2513 | the process is running. If BOOL is not given, query before exiting. |
| 2514 | |
| 2515 | :stop BOOL -- Start process in the `stopped' state if BOOL is non-nil. |
| 2516 | In the stopped state, a serial process does not accept incoming data, |
| 2517 | but you can send outgoing data. The stopped state is cleared by |
| 2518 | `continue-process' and set by `stop-process'. |
| 2519 | |
| 2520 | :filter FILTER -- Install FILTER as the process filter. |
| 2521 | |
| 2522 | :sentinel SENTINEL -- Install SENTINEL as the process sentinel. |
| 2523 | |
| 2524 | :plist PLIST -- Install PLIST as the initial plist of the process. |
| 2525 | |
| 2526 | :bytesize |
| 2527 | :parity |
| 2528 | :stopbits |
| 2529 | :flowcontrol |
| 2530 | -- This function calls `serial-process-configure' to handle these |
| 2531 | arguments. |
| 2532 | |
| 2533 | The original argument list, possibly modified by later configuration, |
| 2534 | is available via the function `process-contact'. |
| 2535 | |
| 2536 | Examples: |
| 2537 | |
| 2538 | \(make-serial-process :port "/dev/ttyS0" :speed 9600) |
| 2539 | |
| 2540 | \(make-serial-process :port "COM1" :speed 115200 :stopbits 2) |
| 2541 | |
| 2542 | \(make-serial-process :port "\\\\.\\COM13" :speed 1200 :bytesize 7 :parity 'odd) |
| 2543 | |
| 2544 | \(make-serial-process :port "/dev/tty.BlueConsole-SPP-1" :speed nil) |
| 2545 | |
| 2546 | usage: (make-serial-process &rest ARGS) */) |
| 2547 | (ptrdiff_t nargs, Lisp_Object *args) |
| 2548 | { |
| 2549 | int fd = -1; |
| 2550 | Lisp_Object proc, contact, port; |
| 2551 | struct Lisp_Process *p; |
| 2552 | struct gcpro gcpro1; |
| 2553 | Lisp_Object name, buffer; |
| 2554 | Lisp_Object tem, val; |
| 2555 | ptrdiff_t specpdl_count; |
| 2556 | |
| 2557 | if (nargs == 0) |
| 2558 | return Qnil; |
| 2559 | |
| 2560 | contact = Flist (nargs, args); |
| 2561 | GCPRO1 (contact); |
| 2562 | |
| 2563 | port = Fplist_get (contact, QCport); |
| 2564 | if (NILP (port)) |
| 2565 | error ("No port specified"); |
| 2566 | CHECK_STRING (port); |
| 2567 | |
| 2568 | if (NILP (Fplist_member (contact, QCspeed))) |
| 2569 | error (":speed not specified"); |
| 2570 | if (!NILP (Fplist_get (contact, QCspeed))) |
| 2571 | CHECK_NUMBER (Fplist_get (contact, QCspeed)); |
| 2572 | |
| 2573 | name = Fplist_get (contact, QCname); |
| 2574 | if (NILP (name)) |
| 2575 | name = port; |
| 2576 | CHECK_STRING (name); |
| 2577 | proc = make_process (name); |
| 2578 | specpdl_count = SPECPDL_INDEX (); |
| 2579 | record_unwind_protect (remove_process, proc); |
| 2580 | p = XPROCESS (proc); |
| 2581 | |
| 2582 | fd = serial_open (port); |
| 2583 | p->open_fd[SUBPROCESS_STDIN] = fd; |
| 2584 | p->infd = fd; |
| 2585 | p->outfd = fd; |
| 2586 | if (fd > max_process_desc) |
| 2587 | max_process_desc = fd; |
| 2588 | chan_process[fd] = proc; |
| 2589 | |
| 2590 | buffer = Fplist_get (contact, QCbuffer); |
| 2591 | if (NILP (buffer)) |
| 2592 | buffer = name; |
| 2593 | buffer = Fget_buffer_create (buffer); |
| 2594 | pset_buffer (p, buffer); |
| 2595 | |
| 2596 | pset_childp (p, contact); |
| 2597 | pset_plist (p, Fcopy_sequence (Fplist_get (contact, QCplist))); |
| 2598 | pset_type (p, Qserial); |
| 2599 | pset_sentinel (p, Fplist_get (contact, QCsentinel)); |
| 2600 | pset_filter (p, Fplist_get (contact, QCfilter)); |
| 2601 | pset_log (p, Qnil); |
| 2602 | if (tem = Fplist_get (contact, QCnoquery), !NILP (tem)) |
| 2603 | p->kill_without_query = 1; |
| 2604 | if (tem = Fplist_get (contact, QCstop), !NILP (tem)) |
| 2605 | pset_command (p, Qt); |
| 2606 | eassert (! p->pty_flag); |
| 2607 | |
| 2608 | if (!EQ (p->command, Qt)) |
| 2609 | { |
| 2610 | FD_SET (fd, &input_wait_mask); |
| 2611 | FD_SET (fd, &non_keyboard_wait_mask); |
| 2612 | } |
| 2613 | |
| 2614 | if (BUFFERP (buffer)) |
| 2615 | { |
| 2616 | set_marker_both (p->mark, buffer, |
| 2617 | BUF_ZV (XBUFFER (buffer)), |
| 2618 | BUF_ZV_BYTE (XBUFFER (buffer))); |
| 2619 | } |
| 2620 | |
| 2621 | tem = Fplist_member (contact, QCcoding); |
| 2622 | if (!NILP (tem) && (!CONSP (tem) || !CONSP (XCDR (tem)))) |
| 2623 | tem = Qnil; |
| 2624 | |
| 2625 | val = Qnil; |
| 2626 | if (!NILP (tem)) |
| 2627 | { |
| 2628 | val = XCAR (XCDR (tem)); |
| 2629 | if (CONSP (val)) |
| 2630 | val = XCAR (val); |
| 2631 | } |
| 2632 | else if (!NILP (Vcoding_system_for_read)) |
| 2633 | val = Vcoding_system_for_read; |
| 2634 | else if ((!NILP (buffer) && NILP (BVAR (XBUFFER (buffer), enable_multibyte_characters))) |
| 2635 | || (NILP (buffer) && NILP (BVAR (&buffer_defaults, enable_multibyte_characters)))) |
| 2636 | val = Qnil; |
| 2637 | pset_decode_coding_system (p, val); |
| 2638 | |
| 2639 | val = Qnil; |
| 2640 | if (!NILP (tem)) |
| 2641 | { |
| 2642 | val = XCAR (XCDR (tem)); |
| 2643 | if (CONSP (val)) |
| 2644 | val = XCDR (val); |
| 2645 | } |
| 2646 | else if (!NILP (Vcoding_system_for_write)) |
| 2647 | val = Vcoding_system_for_write; |
| 2648 | else if ((!NILP (buffer) && NILP (BVAR (XBUFFER (buffer), enable_multibyte_characters))) |
| 2649 | || (NILP (buffer) && NILP (BVAR (&buffer_defaults, enable_multibyte_characters)))) |
| 2650 | val = Qnil; |
| 2651 | pset_encode_coding_system (p, val); |
| 2652 | |
| 2653 | setup_process_coding_systems (proc); |
| 2654 | pset_decoding_buf (p, empty_unibyte_string); |
| 2655 | p->decoding_carryover = 0; |
| 2656 | pset_encoding_buf (p, empty_unibyte_string); |
| 2657 | p->inherit_coding_system_flag |
| 2658 | = !(!NILP (tem) || NILP (buffer) || !inherit_process_coding_system); |
| 2659 | |
| 2660 | Fserial_process_configure (nargs, args); |
| 2661 | |
| 2662 | specpdl_ptr = specpdl + specpdl_count; |
| 2663 | |
| 2664 | UNGCPRO; |
| 2665 | return proc; |
| 2666 | } |
| 2667 | |
| 2668 | /* Create a network stream/datagram client/server process. Treated |
| 2669 | exactly like a normal process when reading and writing. Primary |
| 2670 | differences are in status display and process deletion. A network |
| 2671 | connection has no PID; you cannot signal it. All you can do is |
| 2672 | stop/continue it and deactivate/close it via delete-process */ |
| 2673 | |
| 2674 | DEFUN ("make-network-process", Fmake_network_process, Smake_network_process, |
| 2675 | 0, MANY, 0, |
| 2676 | doc: /* Create and return a network server or client process. |
| 2677 | |
| 2678 | In Emacs, network connections are represented by process objects, so |
| 2679 | input and output work as for subprocesses and `delete-process' closes |
| 2680 | a network connection. However, a network process has no process id, |
| 2681 | it cannot be signaled, and the status codes are different from normal |
| 2682 | processes. |
| 2683 | |
| 2684 | Arguments are specified as keyword/argument pairs. The following |
| 2685 | arguments are defined: |
| 2686 | |
| 2687 | :name NAME -- NAME is name for process. It is modified if necessary |
| 2688 | to make it unique. |
| 2689 | |
| 2690 | :buffer BUFFER -- BUFFER is the buffer (or buffer-name) to associate |
| 2691 | with the process. Process output goes at end of that buffer, unless |
| 2692 | you specify an output stream or filter function to handle the output. |
| 2693 | BUFFER may be also nil, meaning that this process is not associated |
| 2694 | with any buffer. |
| 2695 | |
| 2696 | :host HOST -- HOST is name of the host to connect to, or its IP |
| 2697 | address. The symbol `local' specifies the local host. If specified |
| 2698 | for a server process, it must be a valid name or address for the local |
| 2699 | host, and only clients connecting to that address will be accepted. |
| 2700 | |
| 2701 | :service SERVICE -- SERVICE is name of the service desired, or an |
| 2702 | integer specifying a port number to connect to. If SERVICE is t, |
| 2703 | a random port number is selected for the server. (If Emacs was |
| 2704 | compiled with getaddrinfo, a port number can also be specified as a |
| 2705 | string, e.g. "80", as well as an integer. This is not portable.) |
| 2706 | |
| 2707 | :type TYPE -- TYPE is the type of connection. The default (nil) is a |
| 2708 | stream type connection, `datagram' creates a datagram type connection, |
| 2709 | `seqpacket' creates a reliable datagram connection. |
| 2710 | |
| 2711 | :family FAMILY -- FAMILY is the address (and protocol) family for the |
| 2712 | service specified by HOST and SERVICE. The default (nil) is to use |
| 2713 | whatever address family (IPv4 or IPv6) that is defined for the host |
| 2714 | and port number specified by HOST and SERVICE. Other address families |
| 2715 | supported are: |
| 2716 | local -- for a local (i.e. UNIX) address specified by SERVICE. |
| 2717 | ipv4 -- use IPv4 address family only. |
| 2718 | ipv6 -- use IPv6 address family only. |
| 2719 | |
| 2720 | :local ADDRESS -- ADDRESS is the local address used for the connection. |
| 2721 | This parameter is ignored when opening a client process. When specified |
| 2722 | for a server process, the FAMILY, HOST and SERVICE args are ignored. |
| 2723 | |
| 2724 | :remote ADDRESS -- ADDRESS is the remote partner's address for the |
| 2725 | connection. This parameter is ignored when opening a stream server |
| 2726 | process. For a datagram server process, it specifies the initial |
| 2727 | setting of the remote datagram address. When specified for a client |
| 2728 | process, the FAMILY, HOST, and SERVICE args are ignored. |
| 2729 | |
| 2730 | The format of ADDRESS depends on the address family: |
| 2731 | - An IPv4 address is represented as an vector of integers [A B C D P] |
| 2732 | corresponding to numeric IP address A.B.C.D and port number P. |
| 2733 | - A local address is represented as a string with the address in the |
| 2734 | local address space. |
| 2735 | - An "unsupported family" address is represented by a cons (F . AV) |
| 2736 | where F is the family number and AV is a vector containing the socket |
| 2737 | address data with one element per address data byte. Do not rely on |
| 2738 | this format in portable code, as it may depend on implementation |
| 2739 | defined constants, data sizes, and data structure alignment. |
| 2740 | |
| 2741 | :coding CODING -- If CODING is a symbol, it specifies the coding |
| 2742 | system used for both reading and writing for this process. If CODING |
| 2743 | is a cons (DECODING . ENCODING), DECODING is used for reading, and |
| 2744 | ENCODING is used for writing. |
| 2745 | |
| 2746 | :nowait BOOL -- If BOOL is non-nil for a stream type client process, |
| 2747 | return without waiting for the connection to complete; instead, the |
| 2748 | sentinel function will be called with second arg matching "open" (if |
| 2749 | successful) or "failed" when the connect completes. Default is to use |
| 2750 | a blocking connect (i.e. wait) for stream type connections. |
| 2751 | |
| 2752 | :noquery BOOL -- Query the user unless BOOL is non-nil, and process is |
| 2753 | running when Emacs is exited. |
| 2754 | |
| 2755 | :stop BOOL -- Start process in the `stopped' state if BOOL non-nil. |
| 2756 | In the stopped state, a server process does not accept new |
| 2757 | connections, and a client process does not handle incoming traffic. |
| 2758 | The stopped state is cleared by `continue-process' and set by |
| 2759 | `stop-process'. |
| 2760 | |
| 2761 | :filter FILTER -- Install FILTER as the process filter. |
| 2762 | |
| 2763 | :filter-multibyte BOOL -- If BOOL is non-nil, strings given to the |
| 2764 | process filter are multibyte, otherwise they are unibyte. |
| 2765 | If this keyword is not specified, the strings are multibyte if |
| 2766 | the default value of `enable-multibyte-characters' is non-nil. |
| 2767 | |
| 2768 | :sentinel SENTINEL -- Install SENTINEL as the process sentinel. |
| 2769 | |
| 2770 | :log LOG -- Install LOG as the server process log function. This |
| 2771 | function is called when the server accepts a network connection from a |
| 2772 | client. The arguments are SERVER, CLIENT, and MESSAGE, where SERVER |
| 2773 | is the server process, CLIENT is the new process for the connection, |
| 2774 | and MESSAGE is a string. |
| 2775 | |
| 2776 | :plist PLIST -- Install PLIST as the new process's initial plist. |
| 2777 | |
| 2778 | :server QLEN -- if QLEN is non-nil, create a server process for the |
| 2779 | specified FAMILY, SERVICE, and connection type (stream or datagram). |
| 2780 | If QLEN is an integer, it is used as the max. length of the server's |
| 2781 | pending connection queue (also known as the backlog); the default |
| 2782 | queue length is 5. Default is to create a client process. |
| 2783 | |
| 2784 | The following network options can be specified for this connection: |
| 2785 | |
| 2786 | :broadcast BOOL -- Allow send and receive of datagram broadcasts. |
| 2787 | :dontroute BOOL -- Only send to directly connected hosts. |
| 2788 | :keepalive BOOL -- Send keep-alive messages on network stream. |
| 2789 | :linger BOOL or TIMEOUT -- Send queued messages before closing. |
| 2790 | :oobinline BOOL -- Place out-of-band data in receive data stream. |
| 2791 | :priority INT -- Set protocol defined priority for sent packets. |
| 2792 | :reuseaddr BOOL -- Allow reusing a recently used local address |
| 2793 | (this is allowed by default for a server process). |
| 2794 | :bindtodevice NAME -- bind to interface NAME. Using this may require |
| 2795 | special privileges on some systems. |
| 2796 | |
| 2797 | Consult the relevant system programmer's manual pages for more |
| 2798 | information on using these options. |
| 2799 | |
| 2800 | |
| 2801 | A server process will listen for and accept connections from clients. |
| 2802 | When a client connection is accepted, a new network process is created |
| 2803 | for the connection with the following parameters: |
| 2804 | |
| 2805 | - The client's process name is constructed by concatenating the server |
| 2806 | process's NAME and a client identification string. |
| 2807 | - If the FILTER argument is non-nil, the client process will not get a |
| 2808 | separate process buffer; otherwise, the client's process buffer is a newly |
| 2809 | created buffer named after the server process's BUFFER name or process |
| 2810 | NAME concatenated with the client identification string. |
| 2811 | - The connection type and the process filter and sentinel parameters are |
| 2812 | inherited from the server process's TYPE, FILTER and SENTINEL. |
| 2813 | - The client process's contact info is set according to the client's |
| 2814 | addressing information (typically an IP address and a port number). |
| 2815 | - The client process's plist is initialized from the server's plist. |
| 2816 | |
| 2817 | Notice that the FILTER and SENTINEL args are never used directly by |
| 2818 | the server process. Also, the BUFFER argument is not used directly by |
| 2819 | the server process, but via the optional :log function, accepted (and |
| 2820 | failed) connections may be logged in the server process's buffer. |
| 2821 | |
| 2822 | The original argument list, modified with the actual connection |
| 2823 | information, is available via the `process-contact' function. |
| 2824 | |
| 2825 | usage: (make-network-process &rest ARGS) */) |
| 2826 | (ptrdiff_t nargs, Lisp_Object *args) |
| 2827 | { |
| 2828 | Lisp_Object proc; |
| 2829 | Lisp_Object contact; |
| 2830 | struct Lisp_Process *p; |
| 2831 | #ifdef HAVE_GETADDRINFO |
| 2832 | struct addrinfo ai, *res, *lres; |
| 2833 | struct addrinfo hints; |
| 2834 | const char *portstring; |
| 2835 | char portbuf[128]; |
| 2836 | #else /* HAVE_GETADDRINFO */ |
| 2837 | struct _emacs_addrinfo |
| 2838 | { |
| 2839 | int ai_family; |
| 2840 | int ai_socktype; |
| 2841 | int ai_protocol; |
| 2842 | int ai_addrlen; |
| 2843 | struct sockaddr *ai_addr; |
| 2844 | struct _emacs_addrinfo *ai_next; |
| 2845 | } ai, *res, *lres; |
| 2846 | #endif /* HAVE_GETADDRINFO */ |
| 2847 | struct sockaddr_in address_in; |
| 2848 | #ifdef HAVE_LOCAL_SOCKETS |
| 2849 | struct sockaddr_un address_un; |
| 2850 | #endif |
| 2851 | int port; |
| 2852 | int ret = 0; |
| 2853 | int xerrno = 0; |
| 2854 | int s = -1, outch, inch; |
| 2855 | struct gcpro gcpro1; |
| 2856 | ptrdiff_t count = SPECPDL_INDEX (); |
| 2857 | ptrdiff_t count1; |
| 2858 | Lisp_Object QCaddress; /* one of QClocal or QCremote */ |
| 2859 | Lisp_Object tem; |
| 2860 | Lisp_Object name, buffer, host, service, address; |
| 2861 | Lisp_Object filter, sentinel; |
| 2862 | bool is_non_blocking_client = 0; |
| 2863 | bool is_server = 0; |
| 2864 | int backlog = 5; |
| 2865 | int socktype; |
| 2866 | int family = -1; |
| 2867 | |
| 2868 | if (nargs == 0) |
| 2869 | return Qnil; |
| 2870 | |
| 2871 | /* Save arguments for process-contact and clone-process. */ |
| 2872 | contact = Flist (nargs, args); |
| 2873 | GCPRO1 (contact); |
| 2874 | |
| 2875 | #ifdef WINDOWSNT |
| 2876 | /* Ensure socket support is loaded if available. */ |
| 2877 | init_winsock (TRUE); |
| 2878 | #endif |
| 2879 | |
| 2880 | /* :type TYPE (nil: stream, datagram */ |
| 2881 | tem = Fplist_get (contact, QCtype); |
| 2882 | if (NILP (tem)) |
| 2883 | socktype = SOCK_STREAM; |
| 2884 | #ifdef DATAGRAM_SOCKETS |
| 2885 | else if (EQ (tem, Qdatagram)) |
| 2886 | socktype = SOCK_DGRAM; |
| 2887 | #endif |
| 2888 | #ifdef HAVE_SEQPACKET |
| 2889 | else if (EQ (tem, Qseqpacket)) |
| 2890 | socktype = SOCK_SEQPACKET; |
| 2891 | #endif |
| 2892 | else |
| 2893 | error ("Unsupported connection type"); |
| 2894 | |
| 2895 | /* :server BOOL */ |
| 2896 | tem = Fplist_get (contact, QCserver); |
| 2897 | if (!NILP (tem)) |
| 2898 | { |
| 2899 | /* Don't support network sockets when non-blocking mode is |
| 2900 | not available, since a blocked Emacs is not useful. */ |
| 2901 | is_server = 1; |
| 2902 | if (TYPE_RANGED_INTEGERP (int, tem)) |
| 2903 | backlog = XINT (tem); |
| 2904 | } |
| 2905 | |
| 2906 | /* Make QCaddress an alias for :local (server) or :remote (client). */ |
| 2907 | QCaddress = is_server ? QClocal : QCremote; |
| 2908 | |
| 2909 | /* :nowait BOOL */ |
| 2910 | if (!is_server && socktype != SOCK_DGRAM |
| 2911 | && (tem = Fplist_get (contact, QCnowait), !NILP (tem))) |
| 2912 | { |
| 2913 | #ifndef NON_BLOCKING_CONNECT |
| 2914 | error ("Non-blocking connect not supported"); |
| 2915 | #else |
| 2916 | is_non_blocking_client = 1; |
| 2917 | #endif |
| 2918 | } |
| 2919 | |
| 2920 | name = Fplist_get (contact, QCname); |
| 2921 | buffer = Fplist_get (contact, QCbuffer); |
| 2922 | filter = Fplist_get (contact, QCfilter); |
| 2923 | sentinel = Fplist_get (contact, QCsentinel); |
| 2924 | |
| 2925 | CHECK_STRING (name); |
| 2926 | |
| 2927 | /* Initialize addrinfo structure in case we don't use getaddrinfo. */ |
| 2928 | ai.ai_socktype = socktype; |
| 2929 | ai.ai_protocol = 0; |
| 2930 | ai.ai_next = NULL; |
| 2931 | res = &ai; |
| 2932 | |
| 2933 | /* :local ADDRESS or :remote ADDRESS */ |
| 2934 | address = Fplist_get (contact, QCaddress); |
| 2935 | if (!NILP (address)) |
| 2936 | { |
| 2937 | host = service = Qnil; |
| 2938 | |
| 2939 | if (!(ai.ai_addrlen = get_lisp_to_sockaddr_size (address, &family))) |
| 2940 | error ("Malformed :address"); |
| 2941 | ai.ai_family = family; |
| 2942 | ai.ai_addr = alloca (ai.ai_addrlen); |
| 2943 | conv_lisp_to_sockaddr (family, address, ai.ai_addr, ai.ai_addrlen); |
| 2944 | goto open_socket; |
| 2945 | } |
| 2946 | |
| 2947 | /* :family FAMILY -- nil (for Inet), local, or integer. */ |
| 2948 | tem = Fplist_get (contact, QCfamily); |
| 2949 | if (NILP (tem)) |
| 2950 | { |
| 2951 | #if defined (HAVE_GETADDRINFO) && defined (AF_INET6) |
| 2952 | family = AF_UNSPEC; |
| 2953 | #else |
| 2954 | family = AF_INET; |
| 2955 | #endif |
| 2956 | } |
| 2957 | #ifdef HAVE_LOCAL_SOCKETS |
| 2958 | else if (EQ (tem, Qlocal)) |
| 2959 | family = AF_LOCAL; |
| 2960 | #endif |
| 2961 | #ifdef AF_INET6 |
| 2962 | else if (EQ (tem, Qipv6)) |
| 2963 | family = AF_INET6; |
| 2964 | #endif |
| 2965 | else if (EQ (tem, Qipv4)) |
| 2966 | family = AF_INET; |
| 2967 | else if (TYPE_RANGED_INTEGERP (int, tem)) |
| 2968 | family = XINT (tem); |
| 2969 | else |
| 2970 | error ("Unknown address family"); |
| 2971 | |
| 2972 | ai.ai_family = family; |
| 2973 | |
| 2974 | /* :service SERVICE -- string, integer (port number), or t (random port). */ |
| 2975 | service = Fplist_get (contact, QCservice); |
| 2976 | |
| 2977 | /* :host HOST -- hostname, ip address, or 'local for localhost. */ |
| 2978 | host = Fplist_get (contact, QChost); |
| 2979 | if (!NILP (host)) |
| 2980 | { |
| 2981 | if (EQ (host, Qlocal)) |
| 2982 | /* Depending on setup, "localhost" may map to different IPv4 and/or |
| 2983 | IPv6 addresses, so it's better to be explicit. (Bug#6781) */ |
| 2984 | host = build_string ("127.0.0.1"); |
| 2985 | CHECK_STRING (host); |
| 2986 | } |
| 2987 | |
| 2988 | #ifdef HAVE_LOCAL_SOCKETS |
| 2989 | if (family == AF_LOCAL) |
| 2990 | { |
| 2991 | if (!NILP (host)) |
| 2992 | { |
| 2993 | message (":family local ignores the :host \"%s\" property", |
| 2994 | SDATA (host)); |
| 2995 | contact = Fplist_put (contact, QChost, Qnil); |
| 2996 | host = Qnil; |
| 2997 | } |
| 2998 | CHECK_STRING (service); |
| 2999 | memset (&address_un, 0, sizeof address_un); |
| 3000 | address_un.sun_family = AF_LOCAL; |
| 3001 | if (sizeof address_un.sun_path <= SBYTES (service)) |
| 3002 | error ("Service name too long"); |
| 3003 | strcpy (address_un.sun_path, SSDATA (service)); |
| 3004 | ai.ai_addr = (struct sockaddr *) &address_un; |
| 3005 | ai.ai_addrlen = sizeof address_un; |
| 3006 | goto open_socket; |
| 3007 | } |
| 3008 | #endif |
| 3009 | |
| 3010 | /* Slow down polling to every ten seconds. |
| 3011 | Some kernels have a bug which causes retrying connect to fail |
| 3012 | after a connect. Polling can interfere with gethostbyname too. */ |
| 3013 | #ifdef POLL_FOR_INPUT |
| 3014 | if (socktype != SOCK_DGRAM) |
| 3015 | { |
| 3016 | record_unwind_protect_void (run_all_atimers); |
| 3017 | bind_polling_period (10); |
| 3018 | } |
| 3019 | #endif |
| 3020 | |
| 3021 | #ifdef HAVE_GETADDRINFO |
| 3022 | /* If we have a host, use getaddrinfo to resolve both host and service. |
| 3023 | Otherwise, use getservbyname to lookup the service. */ |
| 3024 | if (!NILP (host)) |
| 3025 | { |
| 3026 | |
| 3027 | /* SERVICE can either be a string or int. |
| 3028 | Convert to a C string for later use by getaddrinfo. */ |
| 3029 | if (EQ (service, Qt)) |
| 3030 | portstring = "0"; |
| 3031 | else if (INTEGERP (service)) |
| 3032 | { |
| 3033 | sprintf (portbuf, "%"pI"d", XINT (service)); |
| 3034 | portstring = portbuf; |
| 3035 | } |
| 3036 | else |
| 3037 | { |
| 3038 | CHECK_STRING (service); |
| 3039 | portstring = SSDATA (service); |
| 3040 | } |
| 3041 | |
| 3042 | immediate_quit = 1; |
| 3043 | QUIT; |
| 3044 | memset (&hints, 0, sizeof (hints)); |
| 3045 | hints.ai_flags = 0; |
| 3046 | hints.ai_family = family; |
| 3047 | hints.ai_socktype = socktype; |
| 3048 | hints.ai_protocol = 0; |
| 3049 | |
| 3050 | #ifdef HAVE_RES_INIT |
| 3051 | res_init (); |
| 3052 | #endif |
| 3053 | |
| 3054 | ret = getaddrinfo (SSDATA (host), portstring, &hints, &res); |
| 3055 | if (ret) |
| 3056 | #ifdef HAVE_GAI_STRERROR |
| 3057 | error ("%s/%s %s", SSDATA (host), portstring, gai_strerror (ret)); |
| 3058 | #else |
| 3059 | error ("%s/%s getaddrinfo error %d", SSDATA (host), portstring, ret); |
| 3060 | #endif |
| 3061 | immediate_quit = 0; |
| 3062 | |
| 3063 | goto open_socket; |
| 3064 | } |
| 3065 | #endif /* HAVE_GETADDRINFO */ |
| 3066 | |
| 3067 | /* We end up here if getaddrinfo is not defined, or in case no hostname |
| 3068 | has been specified (e.g. for a local server process). */ |
| 3069 | |
| 3070 | if (EQ (service, Qt)) |
| 3071 | port = 0; |
| 3072 | else if (INTEGERP (service)) |
| 3073 | port = htons ((unsigned short) XINT (service)); |
| 3074 | else |
| 3075 | { |
| 3076 | struct servent *svc_info; |
| 3077 | CHECK_STRING (service); |
| 3078 | svc_info = getservbyname (SSDATA (service), |
| 3079 | (socktype == SOCK_DGRAM ? "udp" : "tcp")); |
| 3080 | if (svc_info == 0) |
| 3081 | error ("Unknown service: %s", SDATA (service)); |
| 3082 | port = svc_info->s_port; |
| 3083 | } |
| 3084 | |
| 3085 | memset (&address_in, 0, sizeof address_in); |
| 3086 | address_in.sin_family = family; |
| 3087 | address_in.sin_addr.s_addr = INADDR_ANY; |
| 3088 | address_in.sin_port = port; |
| 3089 | |
| 3090 | #ifndef HAVE_GETADDRINFO |
| 3091 | if (!NILP (host)) |
| 3092 | { |
| 3093 | struct hostent *host_info_ptr; |
| 3094 | |
| 3095 | /* gethostbyname may fail with TRY_AGAIN, but we don't honor that, |
| 3096 | as it may `hang' Emacs for a very long time. */ |
| 3097 | immediate_quit = 1; |
| 3098 | QUIT; |
| 3099 | |
| 3100 | #ifdef HAVE_RES_INIT |
| 3101 | res_init (); |
| 3102 | #endif |
| 3103 | |
| 3104 | host_info_ptr = gethostbyname (SDATA (host)); |
| 3105 | immediate_quit = 0; |
| 3106 | |
| 3107 | if (host_info_ptr) |
| 3108 | { |
| 3109 | memcpy (&address_in.sin_addr, host_info_ptr->h_addr, |
| 3110 | host_info_ptr->h_length); |
| 3111 | family = host_info_ptr->h_addrtype; |
| 3112 | address_in.sin_family = family; |
| 3113 | } |
| 3114 | else |
| 3115 | /* Attempt to interpret host as numeric inet address */ |
| 3116 | { |
| 3117 | unsigned long numeric_addr; |
| 3118 | numeric_addr = inet_addr (SSDATA (host)); |
| 3119 | if (numeric_addr == -1) |
| 3120 | error ("Unknown host \"%s\"", SDATA (host)); |
| 3121 | |
| 3122 | memcpy (&address_in.sin_addr, &numeric_addr, |
| 3123 | sizeof (address_in.sin_addr)); |
| 3124 | } |
| 3125 | |
| 3126 | } |
| 3127 | #endif /* not HAVE_GETADDRINFO */ |
| 3128 | |
| 3129 | ai.ai_family = family; |
| 3130 | ai.ai_addr = (struct sockaddr *) &address_in; |
| 3131 | ai.ai_addrlen = sizeof address_in; |
| 3132 | |
| 3133 | open_socket: |
| 3134 | |
| 3135 | /* Do this in case we never enter the for-loop below. */ |
| 3136 | count1 = SPECPDL_INDEX (); |
| 3137 | s = -1; |
| 3138 | |
| 3139 | for (lres = res; lres; lres = lres->ai_next) |
| 3140 | { |
| 3141 | ptrdiff_t optn; |
| 3142 | int optbits; |
| 3143 | |
| 3144 | #ifdef WINDOWSNT |
| 3145 | retry_connect: |
| 3146 | #endif |
| 3147 | |
| 3148 | s = socket (lres->ai_family, lres->ai_socktype | SOCK_CLOEXEC, |
| 3149 | lres->ai_protocol); |
| 3150 | if (s < 0) |
| 3151 | { |
| 3152 | xerrno = errno; |
| 3153 | continue; |
| 3154 | } |
| 3155 | |
| 3156 | #ifdef DATAGRAM_SOCKETS |
| 3157 | if (!is_server && socktype == SOCK_DGRAM) |
| 3158 | break; |
| 3159 | #endif /* DATAGRAM_SOCKETS */ |
| 3160 | |
| 3161 | #ifdef NON_BLOCKING_CONNECT |
| 3162 | if (is_non_blocking_client) |
| 3163 | { |
| 3164 | ret = fcntl (s, F_SETFL, O_NONBLOCK); |
| 3165 | if (ret < 0) |
| 3166 | { |
| 3167 | xerrno = errno; |
| 3168 | emacs_close (s); |
| 3169 | s = -1; |
| 3170 | continue; |
| 3171 | } |
| 3172 | } |
| 3173 | #endif |
| 3174 | |
| 3175 | /* Make us close S if quit. */ |
| 3176 | record_unwind_protect_int (close_file_unwind, s); |
| 3177 | |
| 3178 | /* Parse network options in the arg list. |
| 3179 | We simply ignore anything which isn't a known option (including other keywords). |
| 3180 | An error is signaled if setting a known option fails. */ |
| 3181 | for (optn = optbits = 0; optn < nargs-1; optn += 2) |
| 3182 | optbits |= set_socket_option (s, args[optn], args[optn+1]); |
| 3183 | |
| 3184 | if (is_server) |
| 3185 | { |
| 3186 | /* Configure as a server socket. */ |
| 3187 | |
| 3188 | /* SO_REUSEADDR = 1 is default for server sockets; must specify |
| 3189 | explicit :reuseaddr key to override this. */ |
| 3190 | #ifdef HAVE_LOCAL_SOCKETS |
| 3191 | if (family != AF_LOCAL) |
| 3192 | #endif |
| 3193 | if (!(optbits & (1 << OPIX_REUSEADDR))) |
| 3194 | { |
| 3195 | int optval = 1; |
| 3196 | if (setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof optval)) |
| 3197 | report_file_error ("Cannot set reuse option on server socket", Qnil); |
| 3198 | } |
| 3199 | |
| 3200 | if (bind (s, lres->ai_addr, lres->ai_addrlen)) |
| 3201 | report_file_error ("Cannot bind server socket", Qnil); |
| 3202 | |
| 3203 | #ifdef HAVE_GETSOCKNAME |
| 3204 | if (EQ (service, Qt)) |
| 3205 | { |
| 3206 | struct sockaddr_in sa1; |
| 3207 | socklen_t len1 = sizeof (sa1); |
| 3208 | if (getsockname (s, (struct sockaddr *)&sa1, &len1) == 0) |
| 3209 | { |
| 3210 | ((struct sockaddr_in *)(lres->ai_addr))->sin_port = sa1.sin_port; |
| 3211 | service = make_number (ntohs (sa1.sin_port)); |
| 3212 | contact = Fplist_put (contact, QCservice, service); |
| 3213 | } |
| 3214 | } |
| 3215 | #endif |
| 3216 | |
| 3217 | if (socktype != SOCK_DGRAM && listen (s, backlog)) |
| 3218 | report_file_error ("Cannot listen on server socket", Qnil); |
| 3219 | |
| 3220 | break; |
| 3221 | } |
| 3222 | |
| 3223 | immediate_quit = 1; |
| 3224 | QUIT; |
| 3225 | |
| 3226 | ret = connect (s, lres->ai_addr, lres->ai_addrlen); |
| 3227 | xerrno = errno; |
| 3228 | |
| 3229 | if (ret == 0 || xerrno == EISCONN) |
| 3230 | { |
| 3231 | /* The unwind-protect will be discarded afterwards. |
| 3232 | Likewise for immediate_quit. */ |
| 3233 | break; |
| 3234 | } |
| 3235 | |
| 3236 | #ifdef NON_BLOCKING_CONNECT |
| 3237 | #ifdef EINPROGRESS |
| 3238 | if (is_non_blocking_client && xerrno == EINPROGRESS) |
| 3239 | break; |
| 3240 | #else |
| 3241 | #ifdef EWOULDBLOCK |
| 3242 | if (is_non_blocking_client && xerrno == EWOULDBLOCK) |
| 3243 | break; |
| 3244 | #endif |
| 3245 | #endif |
| 3246 | #endif |
| 3247 | |
| 3248 | #ifndef WINDOWSNT |
| 3249 | if (xerrno == EINTR) |
| 3250 | { |
| 3251 | /* Unlike most other syscalls connect() cannot be called |
| 3252 | again. (That would return EALREADY.) The proper way to |
| 3253 | wait for completion is pselect(). */ |
| 3254 | int sc; |
| 3255 | socklen_t len; |
| 3256 | fd_set fdset; |
| 3257 | retry_select: |
| 3258 | FD_ZERO (&fdset); |
| 3259 | FD_SET (s, &fdset); |
| 3260 | QUIT; |
| 3261 | sc = pselect (s + 1, NULL, &fdset, NULL, NULL, NULL); |
| 3262 | if (sc == -1) |
| 3263 | { |
| 3264 | if (errno == EINTR) |
| 3265 | goto retry_select; |
| 3266 | else |
| 3267 | report_file_error ("Failed select", Qnil); |
| 3268 | } |
| 3269 | eassert (sc > 0); |
| 3270 | |
| 3271 | len = sizeof xerrno; |
| 3272 | eassert (FD_ISSET (s, &fdset)); |
| 3273 | if (getsockopt (s, SOL_SOCKET, SO_ERROR, &xerrno, &len) < 0) |
| 3274 | report_file_error ("Failed getsockopt", Qnil); |
| 3275 | if (xerrno) |
| 3276 | report_file_errno ("Failed connect", Qnil, xerrno); |
| 3277 | break; |
| 3278 | } |
| 3279 | #endif /* !WINDOWSNT */ |
| 3280 | |
| 3281 | immediate_quit = 0; |
| 3282 | |
| 3283 | /* Discard the unwind protect closing S. */ |
| 3284 | specpdl_ptr = specpdl + count1; |
| 3285 | emacs_close (s); |
| 3286 | s = -1; |
| 3287 | |
| 3288 | #ifdef WINDOWSNT |
| 3289 | if (xerrno == EINTR) |
| 3290 | goto retry_connect; |
| 3291 | #endif |
| 3292 | } |
| 3293 | |
| 3294 | if (s >= 0) |
| 3295 | { |
| 3296 | #ifdef DATAGRAM_SOCKETS |
| 3297 | if (socktype == SOCK_DGRAM) |
| 3298 | { |
| 3299 | if (datagram_address[s].sa) |
| 3300 | emacs_abort (); |
| 3301 | datagram_address[s].sa = xmalloc (lres->ai_addrlen); |
| 3302 | datagram_address[s].len = lres->ai_addrlen; |
| 3303 | if (is_server) |
| 3304 | { |
| 3305 | Lisp_Object remote; |
| 3306 | memset (datagram_address[s].sa, 0, lres->ai_addrlen); |
| 3307 | if (remote = Fplist_get (contact, QCremote), !NILP (remote)) |
| 3308 | { |
| 3309 | int rfamily, rlen; |
| 3310 | rlen = get_lisp_to_sockaddr_size (remote, &rfamily); |
| 3311 | if (rlen != 0 && rfamily == lres->ai_family |
| 3312 | && rlen == lres->ai_addrlen) |
| 3313 | conv_lisp_to_sockaddr (rfamily, remote, |
| 3314 | datagram_address[s].sa, rlen); |
| 3315 | } |
| 3316 | } |
| 3317 | else |
| 3318 | memcpy (datagram_address[s].sa, lres->ai_addr, lres->ai_addrlen); |
| 3319 | } |
| 3320 | #endif |
| 3321 | contact = Fplist_put (contact, QCaddress, |
| 3322 | conv_sockaddr_to_lisp (lres->ai_addr, lres->ai_addrlen)); |
| 3323 | #ifdef HAVE_GETSOCKNAME |
| 3324 | if (!is_server) |
| 3325 | { |
| 3326 | struct sockaddr_in sa1; |
| 3327 | socklen_t len1 = sizeof (sa1); |
| 3328 | if (getsockname (s, (struct sockaddr *)&sa1, &len1) == 0) |
| 3329 | contact = Fplist_put (contact, QClocal, |
| 3330 | conv_sockaddr_to_lisp ((struct sockaddr *)&sa1, len1)); |
| 3331 | } |
| 3332 | #endif |
| 3333 | } |
| 3334 | |
| 3335 | immediate_quit = 0; |
| 3336 | |
| 3337 | #ifdef HAVE_GETADDRINFO |
| 3338 | if (res != &ai) |
| 3339 | { |
| 3340 | block_input (); |
| 3341 | freeaddrinfo (res); |
| 3342 | unblock_input (); |
| 3343 | } |
| 3344 | #endif |
| 3345 | |
| 3346 | if (s < 0) |
| 3347 | { |
| 3348 | /* If non-blocking got this far - and failed - assume non-blocking is |
| 3349 | not supported after all. This is probably a wrong assumption, but |
| 3350 | the normal blocking calls to open-network-stream handles this error |
| 3351 | better. */ |
| 3352 | if (is_non_blocking_client) |
| 3353 | return Qnil; |
| 3354 | |
| 3355 | report_file_errno ((is_server |
| 3356 | ? "make server process failed" |
| 3357 | : "make client process failed"), |
| 3358 | contact, xerrno); |
| 3359 | } |
| 3360 | |
| 3361 | inch = s; |
| 3362 | outch = s; |
| 3363 | |
| 3364 | if (!NILP (buffer)) |
| 3365 | buffer = Fget_buffer_create (buffer); |
| 3366 | proc = make_process (name); |
| 3367 | |
| 3368 | chan_process[inch] = proc; |
| 3369 | |
| 3370 | fcntl (inch, F_SETFL, O_NONBLOCK); |
| 3371 | |
| 3372 | p = XPROCESS (proc); |
| 3373 | |
| 3374 | pset_childp (p, contact); |
| 3375 | pset_plist (p, Fcopy_sequence (Fplist_get (contact, QCplist))); |
| 3376 | pset_type (p, Qnetwork); |
| 3377 | |
| 3378 | pset_buffer (p, buffer); |
| 3379 | pset_sentinel (p, sentinel); |
| 3380 | pset_filter (p, filter); |
| 3381 | pset_log (p, Fplist_get (contact, QClog)); |
| 3382 | if (tem = Fplist_get (contact, QCnoquery), !NILP (tem)) |
| 3383 | p->kill_without_query = 1; |
| 3384 | if ((tem = Fplist_get (contact, QCstop), !NILP (tem))) |
| 3385 | pset_command (p, Qt); |
| 3386 | p->pid = 0; |
| 3387 | |
| 3388 | p->open_fd[SUBPROCESS_STDIN] = inch; |
| 3389 | p->infd = inch; |
| 3390 | p->outfd = outch; |
| 3391 | |
| 3392 | /* Discard the unwind protect for closing S, if any. */ |
| 3393 | specpdl_ptr = specpdl + count1; |
| 3394 | |
| 3395 | /* Unwind bind_polling_period and request_sigio. */ |
| 3396 | unbind_to (count, Qnil); |
| 3397 | |
| 3398 | if (is_server && socktype != SOCK_DGRAM) |
| 3399 | pset_status (p, Qlisten); |
| 3400 | |
| 3401 | /* Make the process marker point into the process buffer (if any). */ |
| 3402 | if (BUFFERP (buffer)) |
| 3403 | set_marker_both (p->mark, buffer, |
| 3404 | BUF_ZV (XBUFFER (buffer)), |
| 3405 | BUF_ZV_BYTE (XBUFFER (buffer))); |
| 3406 | |
| 3407 | #ifdef NON_BLOCKING_CONNECT |
| 3408 | if (is_non_blocking_client) |
| 3409 | { |
| 3410 | /* We may get here if connect did succeed immediately. However, |
| 3411 | in that case, we still need to signal this like a non-blocking |
| 3412 | connection. */ |
| 3413 | pset_status (p, Qconnect); |
| 3414 | if (!FD_ISSET (inch, &connect_wait_mask)) |
| 3415 | { |
| 3416 | FD_SET (inch, &connect_wait_mask); |
| 3417 | FD_SET (inch, &write_mask); |
| 3418 | num_pending_connects++; |
| 3419 | } |
| 3420 | } |
| 3421 | else |
| 3422 | #endif |
| 3423 | /* A server may have a client filter setting of Qt, but it must |
| 3424 | still listen for incoming connects unless it is stopped. */ |
| 3425 | if ((!EQ (p->filter, Qt) && !EQ (p->command, Qt)) |
| 3426 | || (EQ (p->status, Qlisten) && NILP (p->command))) |
| 3427 | { |
| 3428 | FD_SET (inch, &input_wait_mask); |
| 3429 | FD_SET (inch, &non_keyboard_wait_mask); |
| 3430 | } |
| 3431 | |
| 3432 | if (inch > max_process_desc) |
| 3433 | max_process_desc = inch; |
| 3434 | |
| 3435 | tem = Fplist_member (contact, QCcoding); |
| 3436 | if (!NILP (tem) && (!CONSP (tem) || !CONSP (XCDR (tem)))) |
| 3437 | tem = Qnil; /* No error message (too late!). */ |
| 3438 | |
| 3439 | { |
| 3440 | /* Setup coding systems for communicating with the network stream. */ |
| 3441 | struct gcpro gcpro1; |
| 3442 | /* Qt denotes we have not yet called Ffind_operation_coding_system. */ |
| 3443 | Lisp_Object coding_systems = Qt; |
| 3444 | Lisp_Object fargs[5], val; |
| 3445 | |
| 3446 | if (!NILP (tem)) |
| 3447 | { |
| 3448 | val = XCAR (XCDR (tem)); |
| 3449 | if (CONSP (val)) |
| 3450 | val = XCAR (val); |
| 3451 | } |
| 3452 | else if (!NILP (Vcoding_system_for_read)) |
| 3453 | val = Vcoding_system_for_read; |
| 3454 | else if ((!NILP (buffer) && NILP (BVAR (XBUFFER (buffer), enable_multibyte_characters))) |
| 3455 | || (NILP (buffer) && NILP (BVAR (&buffer_defaults, enable_multibyte_characters)))) |
| 3456 | /* We dare not decode end-of-line format by setting VAL to |
| 3457 | Qraw_text, because the existing Emacs Lisp libraries |
| 3458 | assume that they receive bare code including a sequence of |
| 3459 | CR LF. */ |
| 3460 | val = Qnil; |
| 3461 | else |
| 3462 | { |
| 3463 | if (NILP (host) || NILP (service)) |
| 3464 | coding_systems = Qnil; |
| 3465 | else |
| 3466 | { |
| 3467 | fargs[0] = Qopen_network_stream, fargs[1] = name, |
| 3468 | fargs[2] = buffer, fargs[3] = host, fargs[4] = service; |
| 3469 | GCPRO1 (proc); |
| 3470 | coding_systems = Ffind_operation_coding_system (5, fargs); |
| 3471 | UNGCPRO; |
| 3472 | } |
| 3473 | if (CONSP (coding_systems)) |
| 3474 | val = XCAR (coding_systems); |
| 3475 | else if (CONSP (Vdefault_process_coding_system)) |
| 3476 | val = XCAR (Vdefault_process_coding_system); |
| 3477 | else |
| 3478 | val = Qnil; |
| 3479 | } |
| 3480 | pset_decode_coding_system (p, val); |
| 3481 | |
| 3482 | if (!NILP (tem)) |
| 3483 | { |
| 3484 | val = XCAR (XCDR (tem)); |
| 3485 | if (CONSP (val)) |
| 3486 | val = XCDR (val); |
| 3487 | } |
| 3488 | else if (!NILP (Vcoding_system_for_write)) |
| 3489 | val = Vcoding_system_for_write; |
| 3490 | else if (NILP (BVAR (current_buffer, enable_multibyte_characters))) |
| 3491 | val = Qnil; |
| 3492 | else |
| 3493 | { |
| 3494 | if (EQ (coding_systems, Qt)) |
| 3495 | { |
| 3496 | if (NILP (host) || NILP (service)) |
| 3497 | coding_systems = Qnil; |
| 3498 | else |
| 3499 | { |
| 3500 | fargs[0] = Qopen_network_stream, fargs[1] = name, |
| 3501 | fargs[2] = buffer, fargs[3] = host, fargs[4] = service; |
| 3502 | GCPRO1 (proc); |
| 3503 | coding_systems = Ffind_operation_coding_system (5, fargs); |
| 3504 | UNGCPRO; |
| 3505 | } |
| 3506 | } |
| 3507 | if (CONSP (coding_systems)) |
| 3508 | val = XCDR (coding_systems); |
| 3509 | else if (CONSP (Vdefault_process_coding_system)) |
| 3510 | val = XCDR (Vdefault_process_coding_system); |
| 3511 | else |
| 3512 | val = Qnil; |
| 3513 | } |
| 3514 | pset_encode_coding_system (p, val); |
| 3515 | } |
| 3516 | setup_process_coding_systems (proc); |
| 3517 | |
| 3518 | pset_decoding_buf (p, empty_unibyte_string); |
| 3519 | p->decoding_carryover = 0; |
| 3520 | pset_encoding_buf (p, empty_unibyte_string); |
| 3521 | |
| 3522 | p->inherit_coding_system_flag |
| 3523 | = !(!NILP (tem) || NILP (buffer) || !inherit_process_coding_system); |
| 3524 | |
| 3525 | UNGCPRO; |
| 3526 | return proc; |
| 3527 | } |
| 3528 | |
| 3529 | \f |
| 3530 | #ifdef HAVE_NET_IF_H |
| 3531 | |
| 3532 | #ifdef SIOCGIFCONF |
| 3533 | static Lisp_Object |
| 3534 | network_interface_list (void) |
| 3535 | { |
| 3536 | struct ifconf ifconf; |
| 3537 | struct ifreq *ifreq; |
| 3538 | void *buf = NULL; |
| 3539 | ptrdiff_t buf_size = 512; |
| 3540 | int s; |
| 3541 | Lisp_Object res; |
| 3542 | ptrdiff_t count; |
| 3543 | |
| 3544 | s = socket (AF_INET, SOCK_STREAM | SOCK_CLOEXEC, 0); |
| 3545 | if (s < 0) |
| 3546 | return Qnil; |
| 3547 | count = SPECPDL_INDEX (); |
| 3548 | record_unwind_protect_int (close_file_unwind, s); |
| 3549 | |
| 3550 | do |
| 3551 | { |
| 3552 | buf = xpalloc (buf, &buf_size, 1, INT_MAX, 1); |
| 3553 | ifconf.ifc_buf = buf; |
| 3554 | ifconf.ifc_len = buf_size; |
| 3555 | if (ioctl (s, SIOCGIFCONF, &ifconf)) |
| 3556 | { |
| 3557 | emacs_close (s); |
| 3558 | xfree (buf); |
| 3559 | return Qnil; |
| 3560 | } |
| 3561 | } |
| 3562 | while (ifconf.ifc_len == buf_size); |
| 3563 | |
| 3564 | res = unbind_to (count, Qnil); |
| 3565 | ifreq = ifconf.ifc_req; |
| 3566 | while ((char *) ifreq < (char *) ifconf.ifc_req + ifconf.ifc_len) |
| 3567 | { |
| 3568 | struct ifreq *ifq = ifreq; |
| 3569 | #ifdef HAVE_STRUCT_IFREQ_IFR_ADDR_SA_LEN |
| 3570 | #define SIZEOF_IFREQ(sif) \ |
| 3571 | ((sif)->ifr_addr.sa_len < sizeof (struct sockaddr) \ |
| 3572 | ? sizeof (*(sif)) : sizeof ((sif)->ifr_name) + (sif)->ifr_addr.sa_len) |
| 3573 | |
| 3574 | int len = SIZEOF_IFREQ (ifq); |
| 3575 | #else |
| 3576 | int len = sizeof (*ifreq); |
| 3577 | #endif |
| 3578 | char namebuf[sizeof (ifq->ifr_name) + 1]; |
| 3579 | ifreq = (struct ifreq *) ((char *) ifreq + len); |
| 3580 | |
| 3581 | if (ifq->ifr_addr.sa_family != AF_INET) |
| 3582 | continue; |
| 3583 | |
| 3584 | memcpy (namebuf, ifq->ifr_name, sizeof (ifq->ifr_name)); |
| 3585 | namebuf[sizeof (ifq->ifr_name)] = 0; |
| 3586 | res = Fcons (Fcons (build_string (namebuf), |
| 3587 | conv_sockaddr_to_lisp (&ifq->ifr_addr, |
| 3588 | sizeof (struct sockaddr))), |
| 3589 | res); |
| 3590 | } |
| 3591 | |
| 3592 | xfree (buf); |
| 3593 | return res; |
| 3594 | } |
| 3595 | #endif /* SIOCGIFCONF */ |
| 3596 | |
| 3597 | #if defined (SIOCGIFADDR) || defined (SIOCGIFHWADDR) || defined (SIOCGIFFLAGS) |
| 3598 | |
| 3599 | struct ifflag_def { |
| 3600 | int flag_bit; |
| 3601 | const char *flag_sym; |
| 3602 | }; |
| 3603 | |
| 3604 | static const struct ifflag_def ifflag_table[] = { |
| 3605 | #ifdef IFF_UP |
| 3606 | { IFF_UP, "up" }, |
| 3607 | #endif |
| 3608 | #ifdef IFF_BROADCAST |
| 3609 | { IFF_BROADCAST, "broadcast" }, |
| 3610 | #endif |
| 3611 | #ifdef IFF_DEBUG |
| 3612 | { IFF_DEBUG, "debug" }, |
| 3613 | #endif |
| 3614 | #ifdef IFF_LOOPBACK |
| 3615 | { IFF_LOOPBACK, "loopback" }, |
| 3616 | #endif |
| 3617 | #ifdef IFF_POINTOPOINT |
| 3618 | { IFF_POINTOPOINT, "pointopoint" }, |
| 3619 | #endif |
| 3620 | #ifdef IFF_RUNNING |
| 3621 | { IFF_RUNNING, "running" }, |
| 3622 | #endif |
| 3623 | #ifdef IFF_NOARP |
| 3624 | { IFF_NOARP, "noarp" }, |
| 3625 | #endif |
| 3626 | #ifdef IFF_PROMISC |
| 3627 | { IFF_PROMISC, "promisc" }, |
| 3628 | #endif |
| 3629 | #ifdef IFF_NOTRAILERS |
| 3630 | #ifdef NS_IMPL_COCOA |
| 3631 | /* Really means smart, notrailers is obsolete */ |
| 3632 | { IFF_NOTRAILERS, "smart" }, |
| 3633 | #else |
| 3634 | { IFF_NOTRAILERS, "notrailers" }, |
| 3635 | #endif |
| 3636 | #endif |
| 3637 | #ifdef IFF_ALLMULTI |
| 3638 | { IFF_ALLMULTI, "allmulti" }, |
| 3639 | #endif |
| 3640 | #ifdef IFF_MASTER |
| 3641 | { IFF_MASTER, "master" }, |
| 3642 | #endif |
| 3643 | #ifdef IFF_SLAVE |
| 3644 | { IFF_SLAVE, "slave" }, |
| 3645 | #endif |
| 3646 | #ifdef IFF_MULTICAST |
| 3647 | { IFF_MULTICAST, "multicast" }, |
| 3648 | #endif |
| 3649 | #ifdef IFF_PORTSEL |
| 3650 | { IFF_PORTSEL, "portsel" }, |
| 3651 | #endif |
| 3652 | #ifdef IFF_AUTOMEDIA |
| 3653 | { IFF_AUTOMEDIA, "automedia" }, |
| 3654 | #endif |
| 3655 | #ifdef IFF_DYNAMIC |
| 3656 | { IFF_DYNAMIC, "dynamic" }, |
| 3657 | #endif |
| 3658 | #ifdef IFF_OACTIVE |
| 3659 | { IFF_OACTIVE, "oactive" }, /* OpenBSD: transmission in progress */ |
| 3660 | #endif |
| 3661 | #ifdef IFF_SIMPLEX |
| 3662 | { IFF_SIMPLEX, "simplex" }, /* OpenBSD: can't hear own transmissions */ |
| 3663 | #endif |
| 3664 | #ifdef IFF_LINK0 |
| 3665 | { IFF_LINK0, "link0" }, /* OpenBSD: per link layer defined bit */ |
| 3666 | #endif |
| 3667 | #ifdef IFF_LINK1 |
| 3668 | { IFF_LINK1, "link1" }, /* OpenBSD: per link layer defined bit */ |
| 3669 | #endif |
| 3670 | #ifdef IFF_LINK2 |
| 3671 | { IFF_LINK2, "link2" }, /* OpenBSD: per link layer defined bit */ |
| 3672 | #endif |
| 3673 | { 0, 0 } |
| 3674 | }; |
| 3675 | |
| 3676 | static Lisp_Object |
| 3677 | network_interface_info (Lisp_Object ifname) |
| 3678 | { |
| 3679 | struct ifreq rq; |
| 3680 | Lisp_Object res = Qnil; |
| 3681 | Lisp_Object elt; |
| 3682 | int s; |
| 3683 | bool any = 0; |
| 3684 | ptrdiff_t count; |
| 3685 | #if (! (defined SIOCGIFHWADDR && defined HAVE_STRUCT_IFREQ_IFR_HWADDR) \ |
| 3686 | && defined HAVE_GETIFADDRS && defined LLADDR) |
| 3687 | struct ifaddrs *ifap; |
| 3688 | #endif |
| 3689 | |
| 3690 | CHECK_STRING (ifname); |
| 3691 | |
| 3692 | if (sizeof rq.ifr_name <= SBYTES (ifname)) |
| 3693 | error ("interface name too long"); |
| 3694 | strcpy (rq.ifr_name, SSDATA (ifname)); |
| 3695 | |
| 3696 | s = socket (AF_INET, SOCK_STREAM | SOCK_CLOEXEC, 0); |
| 3697 | if (s < 0) |
| 3698 | return Qnil; |
| 3699 | count = SPECPDL_INDEX (); |
| 3700 | record_unwind_protect_int (close_file_unwind, s); |
| 3701 | |
| 3702 | elt = Qnil; |
| 3703 | #if defined (SIOCGIFFLAGS) && defined (HAVE_STRUCT_IFREQ_IFR_FLAGS) |
| 3704 | if (ioctl (s, SIOCGIFFLAGS, &rq) == 0) |
| 3705 | { |
| 3706 | int flags = rq.ifr_flags; |
| 3707 | const struct ifflag_def *fp; |
| 3708 | int fnum; |
| 3709 | |
| 3710 | /* If flags is smaller than int (i.e. short) it may have the high bit set |
| 3711 | due to IFF_MULTICAST. In that case, sign extending it into |
| 3712 | an int is wrong. */ |
| 3713 | if (flags < 0 && sizeof (rq.ifr_flags) < sizeof (flags)) |
| 3714 | flags = (unsigned short) rq.ifr_flags; |
| 3715 | |
| 3716 | any = 1; |
| 3717 | for (fp = ifflag_table; flags != 0 && fp->flag_sym; fp++) |
| 3718 | { |
| 3719 | if (flags & fp->flag_bit) |
| 3720 | { |
| 3721 | elt = Fcons (intern (fp->flag_sym), elt); |
| 3722 | flags -= fp->flag_bit; |
| 3723 | } |
| 3724 | } |
| 3725 | for (fnum = 0; flags && fnum < 32; flags >>= 1, fnum++) |
| 3726 | { |
| 3727 | if (flags & 1) |
| 3728 | { |
| 3729 | elt = Fcons (make_number (fnum), elt); |
| 3730 | } |
| 3731 | } |
| 3732 | } |
| 3733 | #endif |
| 3734 | res = Fcons (elt, res); |
| 3735 | |
| 3736 | elt = Qnil; |
| 3737 | #if defined (SIOCGIFHWADDR) && defined (HAVE_STRUCT_IFREQ_IFR_HWADDR) |
| 3738 | if (ioctl (s, SIOCGIFHWADDR, &rq) == 0) |
| 3739 | { |
| 3740 | Lisp_Object hwaddr = Fmake_vector (make_number (6), Qnil); |
| 3741 | register struct Lisp_Vector *p = XVECTOR (hwaddr); |
| 3742 | int n; |
| 3743 | |
| 3744 | any = 1; |
| 3745 | for (n = 0; n < 6; n++) |
| 3746 | p->contents[n] = make_number (((unsigned char *) |
| 3747 | &rq.ifr_hwaddr.sa_data[0]) |
| 3748 | [n]); |
| 3749 | elt = Fcons (make_number (rq.ifr_hwaddr.sa_family), hwaddr); |
| 3750 | } |
| 3751 | #elif defined (HAVE_GETIFADDRS) && defined (LLADDR) |
| 3752 | if (getifaddrs (&ifap) != -1) |
| 3753 | { |
| 3754 | Lisp_Object hwaddr = Fmake_vector (make_number (6), Qnil); |
| 3755 | register struct Lisp_Vector *p = XVECTOR (hwaddr); |
| 3756 | struct ifaddrs *it; |
| 3757 | |
| 3758 | for (it = ifap; it != NULL; it = it->ifa_next) |
| 3759 | { |
| 3760 | struct sockaddr_dl *sdl = (struct sockaddr_dl*) it->ifa_addr; |
| 3761 | unsigned char linkaddr[6]; |
| 3762 | int n; |
| 3763 | |
| 3764 | if (it->ifa_addr->sa_family != AF_LINK |
| 3765 | || strcmp (it->ifa_name, SSDATA (ifname)) != 0 |
| 3766 | || sdl->sdl_alen != 6) |
| 3767 | continue; |
| 3768 | |
| 3769 | memcpy (linkaddr, LLADDR (sdl), sdl->sdl_alen); |
| 3770 | for (n = 0; n < 6; n++) |
| 3771 | p->contents[n] = make_number (linkaddr[n]); |
| 3772 | |
| 3773 | elt = Fcons (make_number (it->ifa_addr->sa_family), hwaddr); |
| 3774 | break; |
| 3775 | } |
| 3776 | } |
| 3777 | #ifdef HAVE_FREEIFADDRS |
| 3778 | freeifaddrs (ifap); |
| 3779 | #endif |
| 3780 | |
| 3781 | #endif /* HAVE_GETIFADDRS && LLADDR */ |
| 3782 | |
| 3783 | res = Fcons (elt, res); |
| 3784 | |
| 3785 | elt = Qnil; |
| 3786 | #if defined (SIOCGIFNETMASK) && (defined (HAVE_STRUCT_IFREQ_IFR_NETMASK) || defined (HAVE_STRUCT_IFREQ_IFR_ADDR)) |
| 3787 | if (ioctl (s, SIOCGIFNETMASK, &rq) == 0) |
| 3788 | { |
| 3789 | any = 1; |
| 3790 | #ifdef HAVE_STRUCT_IFREQ_IFR_NETMASK |
| 3791 | elt = conv_sockaddr_to_lisp (&rq.ifr_netmask, sizeof (rq.ifr_netmask)); |
| 3792 | #else |
| 3793 | elt = conv_sockaddr_to_lisp (&rq.ifr_addr, sizeof (rq.ifr_addr)); |
| 3794 | #endif |
| 3795 | } |
| 3796 | #endif |
| 3797 | res = Fcons (elt, res); |
| 3798 | |
| 3799 | elt = Qnil; |
| 3800 | #if defined (SIOCGIFBRDADDR) && defined (HAVE_STRUCT_IFREQ_IFR_BROADADDR) |
| 3801 | if (ioctl (s, SIOCGIFBRDADDR, &rq) == 0) |
| 3802 | { |
| 3803 | any = 1; |
| 3804 | elt = conv_sockaddr_to_lisp (&rq.ifr_broadaddr, sizeof (rq.ifr_broadaddr)); |
| 3805 | } |
| 3806 | #endif |
| 3807 | res = Fcons (elt, res); |
| 3808 | |
| 3809 | elt = Qnil; |
| 3810 | #if defined (SIOCGIFADDR) && defined (HAVE_STRUCT_IFREQ_IFR_ADDR) |
| 3811 | if (ioctl (s, SIOCGIFADDR, &rq) == 0) |
| 3812 | { |
| 3813 | any = 1; |
| 3814 | elt = conv_sockaddr_to_lisp (&rq.ifr_addr, sizeof (rq.ifr_addr)); |
| 3815 | } |
| 3816 | #endif |
| 3817 | res = Fcons (elt, res); |
| 3818 | |
| 3819 | return unbind_to (count, any ? res : Qnil); |
| 3820 | } |
| 3821 | #endif /* !SIOCGIFADDR && !SIOCGIFHWADDR && !SIOCGIFFLAGS */ |
| 3822 | #endif /* defined (HAVE_NET_IF_H) */ |
| 3823 | |
| 3824 | DEFUN ("network-interface-list", Fnetwork_interface_list, |
| 3825 | Snetwork_interface_list, 0, 0, 0, |
| 3826 | doc: /* Return an alist of all network interfaces and their network address. |
| 3827 | Each element is a cons, the car of which is a string containing the |
| 3828 | interface name, and the cdr is the network address in internal |
| 3829 | format; see the description of ADDRESS in `make-network-process'. |
| 3830 | |
| 3831 | If the information is not available, return nil. */) |
| 3832 | (void) |
| 3833 | { |
| 3834 | #if (defined HAVE_NET_IF_H && defined SIOCGIFCONF) || defined WINDOWSNT |
| 3835 | return network_interface_list (); |
| 3836 | #else |
| 3837 | return Qnil; |
| 3838 | #endif |
| 3839 | } |
| 3840 | |
| 3841 | DEFUN ("network-interface-info", Fnetwork_interface_info, |
| 3842 | Snetwork_interface_info, 1, 1, 0, |
| 3843 | doc: /* Return information about network interface named IFNAME. |
| 3844 | The return value is a list (ADDR BCAST NETMASK HWADDR FLAGS), |
| 3845 | where ADDR is the layer 3 address, BCAST is the layer 3 broadcast address, |
| 3846 | NETMASK is the layer 3 network mask, HWADDR is the layer 2 address, and |
| 3847 | FLAGS is the current flags of the interface. |
| 3848 | |
| 3849 | Data that is unavailable is returned as nil. */) |
| 3850 | (Lisp_Object ifname) |
| 3851 | { |
| 3852 | #if ((defined HAVE_NET_IF_H \ |
| 3853 | && (defined SIOCGIFADDR || defined SIOCGIFHWADDR \ |
| 3854 | || defined SIOCGIFFLAGS)) \ |
| 3855 | || defined WINDOWSNT) |
| 3856 | return network_interface_info (ifname); |
| 3857 | #else |
| 3858 | return Qnil; |
| 3859 | #endif |
| 3860 | } |
| 3861 | |
| 3862 | |
| 3863 | /* Turn off input and output for process PROC. */ |
| 3864 | |
| 3865 | static void |
| 3866 | deactivate_process (Lisp_Object proc) |
| 3867 | { |
| 3868 | int inchannel; |
| 3869 | struct Lisp_Process *p = XPROCESS (proc); |
| 3870 | int i; |
| 3871 | |
| 3872 | #ifdef HAVE_GNUTLS |
| 3873 | /* Delete GnuTLS structures in PROC, if any. */ |
| 3874 | emacs_gnutls_deinit (proc); |
| 3875 | #endif /* HAVE_GNUTLS */ |
| 3876 | |
| 3877 | #ifdef ADAPTIVE_READ_BUFFERING |
| 3878 | if (p->read_output_delay > 0) |
| 3879 | { |
| 3880 | if (--process_output_delay_count < 0) |
| 3881 | process_output_delay_count = 0; |
| 3882 | p->read_output_delay = 0; |
| 3883 | p->read_output_skip = 0; |
| 3884 | } |
| 3885 | #endif |
| 3886 | |
| 3887 | /* Beware SIGCHLD hereabouts. */ |
| 3888 | |
| 3889 | for (i = 0; i < PROCESS_OPEN_FDS; i++) |
| 3890 | close_process_fd (&p->open_fd[i]); |
| 3891 | |
| 3892 | inchannel = p->infd; |
| 3893 | if (inchannel >= 0) |
| 3894 | { |
| 3895 | p->infd = -1; |
| 3896 | p->outfd = -1; |
| 3897 | #ifdef DATAGRAM_SOCKETS |
| 3898 | if (DATAGRAM_CHAN_P (inchannel)) |
| 3899 | { |
| 3900 | xfree (datagram_address[inchannel].sa); |
| 3901 | datagram_address[inchannel].sa = 0; |
| 3902 | datagram_address[inchannel].len = 0; |
| 3903 | } |
| 3904 | #endif |
| 3905 | chan_process[inchannel] = Qnil; |
| 3906 | FD_CLR (inchannel, &input_wait_mask); |
| 3907 | FD_CLR (inchannel, &non_keyboard_wait_mask); |
| 3908 | #ifdef NON_BLOCKING_CONNECT |
| 3909 | if (FD_ISSET (inchannel, &connect_wait_mask)) |
| 3910 | { |
| 3911 | FD_CLR (inchannel, &connect_wait_mask); |
| 3912 | FD_CLR (inchannel, &write_mask); |
| 3913 | if (--num_pending_connects < 0) |
| 3914 | emacs_abort (); |
| 3915 | } |
| 3916 | #endif |
| 3917 | if (inchannel == max_process_desc) |
| 3918 | { |
| 3919 | /* We just closed the highest-numbered process input descriptor, |
| 3920 | so recompute the highest-numbered one now. */ |
| 3921 | int i = inchannel; |
| 3922 | do |
| 3923 | i--; |
| 3924 | while (0 <= i && NILP (chan_process[i])); |
| 3925 | |
| 3926 | max_process_desc = i; |
| 3927 | } |
| 3928 | } |
| 3929 | } |
| 3930 | |
| 3931 | \f |
| 3932 | DEFUN ("accept-process-output", Faccept_process_output, Saccept_process_output, |
| 3933 | 0, 4, 0, |
| 3934 | doc: /* Allow any pending output from subprocesses to be read by Emacs. |
| 3935 | It is given to their filter functions. |
| 3936 | Non-nil arg PROCESS means do not return until some output has been received |
| 3937 | from PROCESS. |
| 3938 | |
| 3939 | Non-nil second arg SECONDS and third arg MILLISEC are number of seconds |
| 3940 | and milliseconds to wait; return after that much time whether or not |
| 3941 | there is any subprocess output. If SECONDS is a floating point number, |
| 3942 | it specifies a fractional number of seconds to wait. |
| 3943 | The MILLISEC argument is obsolete and should be avoided. |
| 3944 | |
| 3945 | If optional fourth arg JUST-THIS-ONE is non-nil, only accept output |
| 3946 | from PROCESS, suspending reading output from other processes. |
| 3947 | If JUST-THIS-ONE is an integer, don't run any timers either. |
| 3948 | Return non-nil if we received any output before the timeout expired. */) |
| 3949 | (register Lisp_Object process, Lisp_Object seconds, Lisp_Object millisec, Lisp_Object just_this_one) |
| 3950 | { |
| 3951 | intmax_t secs; |
| 3952 | int nsecs; |
| 3953 | |
| 3954 | if (! NILP (process)) |
| 3955 | CHECK_PROCESS (process); |
| 3956 | else |
| 3957 | just_this_one = Qnil; |
| 3958 | |
| 3959 | if (!NILP (millisec)) |
| 3960 | { /* Obsolete calling convention using integers rather than floats. */ |
| 3961 | CHECK_NUMBER (millisec); |
| 3962 | if (NILP (seconds)) |
| 3963 | seconds = make_float (XINT (millisec) / 1000.0); |
| 3964 | else |
| 3965 | { |
| 3966 | CHECK_NUMBER (seconds); |
| 3967 | seconds = make_float (XINT (millisec) / 1000.0 + XINT (seconds)); |
| 3968 | } |
| 3969 | } |
| 3970 | |
| 3971 | secs = 0; |
| 3972 | nsecs = -1; |
| 3973 | |
| 3974 | if (!NILP (seconds)) |
| 3975 | { |
| 3976 | if (INTEGERP (seconds)) |
| 3977 | { |
| 3978 | if (XINT (seconds) > 0) |
| 3979 | { |
| 3980 | secs = XINT (seconds); |
| 3981 | nsecs = 0; |
| 3982 | } |
| 3983 | } |
| 3984 | else if (FLOATP (seconds)) |
| 3985 | { |
| 3986 | if (XFLOAT_DATA (seconds) > 0) |
| 3987 | { |
| 3988 | struct timespec t = dtotimespec (XFLOAT_DATA (seconds)); |
| 3989 | secs = min (t.tv_sec, WAIT_READING_MAX); |
| 3990 | nsecs = t.tv_nsec; |
| 3991 | } |
| 3992 | } |
| 3993 | else |
| 3994 | wrong_type_argument (Qnumberp, seconds); |
| 3995 | } |
| 3996 | else if (! NILP (process)) |
| 3997 | nsecs = 0; |
| 3998 | |
| 3999 | return |
| 4000 | (wait_reading_process_output (secs, nsecs, 0, 0, |
| 4001 | Qnil, |
| 4002 | !NILP (process) ? XPROCESS (process) : NULL, |
| 4003 | NILP (just_this_one) ? 0 : |
| 4004 | !INTEGERP (just_this_one) ? 1 : -1) |
| 4005 | ? Qt : Qnil); |
| 4006 | } |
| 4007 | |
| 4008 | /* Accept a connection for server process SERVER on CHANNEL. */ |
| 4009 | |
| 4010 | static EMACS_INT connect_counter = 0; |
| 4011 | |
| 4012 | static void |
| 4013 | server_accept_connection (Lisp_Object server, int channel) |
| 4014 | { |
| 4015 | Lisp_Object proc, caller, name, buffer; |
| 4016 | Lisp_Object contact, host, service; |
| 4017 | struct Lisp_Process *ps= XPROCESS (server); |
| 4018 | struct Lisp_Process *p; |
| 4019 | int s; |
| 4020 | union u_sockaddr { |
| 4021 | struct sockaddr sa; |
| 4022 | struct sockaddr_in in; |
| 4023 | #ifdef AF_INET6 |
| 4024 | struct sockaddr_in6 in6; |
| 4025 | #endif |
| 4026 | #ifdef HAVE_LOCAL_SOCKETS |
| 4027 | struct sockaddr_un un; |
| 4028 | #endif |
| 4029 | } saddr; |
| 4030 | socklen_t len = sizeof saddr; |
| 4031 | ptrdiff_t count; |
| 4032 | |
| 4033 | s = accept4 (channel, &saddr.sa, &len, SOCK_CLOEXEC); |
| 4034 | |
| 4035 | if (s < 0) |
| 4036 | { |
| 4037 | int code = errno; |
| 4038 | |
| 4039 | if (code == EAGAIN) |
| 4040 | return; |
| 4041 | #ifdef EWOULDBLOCK |
| 4042 | if (code == EWOULDBLOCK) |
| 4043 | return; |
| 4044 | #endif |
| 4045 | |
| 4046 | if (!NILP (ps->log)) |
| 4047 | call3 (ps->log, server, Qnil, |
| 4048 | concat3 (build_string ("accept failed with code"), |
| 4049 | Fnumber_to_string (make_number (code)), |
| 4050 | build_string ("\n"))); |
| 4051 | return; |
| 4052 | } |
| 4053 | |
| 4054 | count = SPECPDL_INDEX (); |
| 4055 | record_unwind_protect_int (close_file_unwind, s); |
| 4056 | |
| 4057 | connect_counter++; |
| 4058 | |
| 4059 | /* Setup a new process to handle the connection. */ |
| 4060 | |
| 4061 | /* Generate a unique identification of the caller, and build contact |
| 4062 | information for this process. */ |
| 4063 | host = Qt; |
| 4064 | service = Qnil; |
| 4065 | switch (saddr.sa.sa_family) |
| 4066 | { |
| 4067 | case AF_INET: |
| 4068 | { |
| 4069 | Lisp_Object args[5]; |
| 4070 | unsigned char *ip = (unsigned char *)&saddr.in.sin_addr.s_addr; |
| 4071 | args[0] = build_string ("%d.%d.%d.%d"); |
| 4072 | args[1] = make_number (*ip++); |
| 4073 | args[2] = make_number (*ip++); |
| 4074 | args[3] = make_number (*ip++); |
| 4075 | args[4] = make_number (*ip++); |
| 4076 | host = Fformat (5, args); |
| 4077 | service = make_number (ntohs (saddr.in.sin_port)); |
| 4078 | |
| 4079 | args[0] = build_string (" <%s:%d>"); |
| 4080 | args[1] = host; |
| 4081 | args[2] = service; |
| 4082 | caller = Fformat (3, args); |
| 4083 | } |
| 4084 | break; |
| 4085 | |
| 4086 | #ifdef AF_INET6 |
| 4087 | case AF_INET6: |
| 4088 | { |
| 4089 | Lisp_Object args[9]; |
| 4090 | uint16_t *ip6 = (uint16_t *)&saddr.in6.sin6_addr; |
| 4091 | int i; |
| 4092 | args[0] = build_string ("%x:%x:%x:%x:%x:%x:%x:%x"); |
| 4093 | for (i = 0; i < 8; i++) |
| 4094 | args[i+1] = make_number (ntohs (ip6[i])); |
| 4095 | host = Fformat (9, args); |
| 4096 | service = make_number (ntohs (saddr.in.sin_port)); |
| 4097 | |
| 4098 | args[0] = build_string (" <[%s]:%d>"); |
| 4099 | args[1] = host; |
| 4100 | args[2] = service; |
| 4101 | caller = Fformat (3, args); |
| 4102 | } |
| 4103 | break; |
| 4104 | #endif |
| 4105 | |
| 4106 | #ifdef HAVE_LOCAL_SOCKETS |
| 4107 | case AF_LOCAL: |
| 4108 | #endif |
| 4109 | default: |
| 4110 | caller = Fnumber_to_string (make_number (connect_counter)); |
| 4111 | caller = concat3 (build_string (" <"), caller, build_string (">")); |
| 4112 | break; |
| 4113 | } |
| 4114 | |
| 4115 | /* Create a new buffer name for this process if it doesn't have a |
| 4116 | filter. The new buffer name is based on the buffer name or |
| 4117 | process name of the server process concatenated with the caller |
| 4118 | identification. */ |
| 4119 | |
| 4120 | if (!(EQ (ps->filter, Qinternal_default_process_filter) |
| 4121 | || EQ (ps->filter, Qt))) |
| 4122 | buffer = Qnil; |
| 4123 | else |
| 4124 | { |
| 4125 | buffer = ps->buffer; |
| 4126 | if (!NILP (buffer)) |
| 4127 | buffer = Fbuffer_name (buffer); |
| 4128 | else |
| 4129 | buffer = ps->name; |
| 4130 | if (!NILP (buffer)) |
| 4131 | { |
| 4132 | buffer = concat2 (buffer, caller); |
| 4133 | buffer = Fget_buffer_create (buffer); |
| 4134 | } |
| 4135 | } |
| 4136 | |
| 4137 | /* Generate a unique name for the new server process. Combine the |
| 4138 | server process name with the caller identification. */ |
| 4139 | |
| 4140 | name = concat2 (ps->name, caller); |
| 4141 | proc = make_process (name); |
| 4142 | |
| 4143 | chan_process[s] = proc; |
| 4144 | |
| 4145 | fcntl (s, F_SETFL, O_NONBLOCK); |
| 4146 | |
| 4147 | p = XPROCESS (proc); |
| 4148 | |
| 4149 | /* Build new contact information for this setup. */ |
| 4150 | contact = Fcopy_sequence (ps->childp); |
| 4151 | contact = Fplist_put (contact, QCserver, Qnil); |
| 4152 | contact = Fplist_put (contact, QChost, host); |
| 4153 | if (!NILP (service)) |
| 4154 | contact = Fplist_put (contact, QCservice, service); |
| 4155 | contact = Fplist_put (contact, QCremote, |
| 4156 | conv_sockaddr_to_lisp (&saddr.sa, len)); |
| 4157 | #ifdef HAVE_GETSOCKNAME |
| 4158 | len = sizeof saddr; |
| 4159 | if (getsockname (s, &saddr.sa, &len) == 0) |
| 4160 | contact = Fplist_put (contact, QClocal, |
| 4161 | conv_sockaddr_to_lisp (&saddr.sa, len)); |
| 4162 | #endif |
| 4163 | |
| 4164 | pset_childp (p, contact); |
| 4165 | pset_plist (p, Fcopy_sequence (ps->plist)); |
| 4166 | pset_type (p, Qnetwork); |
| 4167 | |
| 4168 | pset_buffer (p, buffer); |
| 4169 | pset_sentinel (p, ps->sentinel); |
| 4170 | pset_filter (p, ps->filter); |
| 4171 | pset_command (p, Qnil); |
| 4172 | p->pid = 0; |
| 4173 | |
| 4174 | /* Discard the unwind protect for closing S. */ |
| 4175 | specpdl_ptr = specpdl + count; |
| 4176 | |
| 4177 | p->open_fd[SUBPROCESS_STDIN] = s; |
| 4178 | p->infd = s; |
| 4179 | p->outfd = s; |
| 4180 | pset_status (p, Qrun); |
| 4181 | |
| 4182 | /* Client processes for accepted connections are not stopped initially. */ |
| 4183 | if (!EQ (p->filter, Qt)) |
| 4184 | { |
| 4185 | FD_SET (s, &input_wait_mask); |
| 4186 | FD_SET (s, &non_keyboard_wait_mask); |
| 4187 | } |
| 4188 | |
| 4189 | if (s > max_process_desc) |
| 4190 | max_process_desc = s; |
| 4191 | |
| 4192 | /* Setup coding system for new process based on server process. |
| 4193 | This seems to be the proper thing to do, as the coding system |
| 4194 | of the new process should reflect the settings at the time the |
| 4195 | server socket was opened; not the current settings. */ |
| 4196 | |
| 4197 | pset_decode_coding_system (p, ps->decode_coding_system); |
| 4198 | pset_encode_coding_system (p, ps->encode_coding_system); |
| 4199 | setup_process_coding_systems (proc); |
| 4200 | |
| 4201 | pset_decoding_buf (p, empty_unibyte_string); |
| 4202 | p->decoding_carryover = 0; |
| 4203 | pset_encoding_buf (p, empty_unibyte_string); |
| 4204 | |
| 4205 | p->inherit_coding_system_flag |
| 4206 | = (NILP (buffer) ? 0 : ps->inherit_coding_system_flag); |
| 4207 | |
| 4208 | if (!NILP (ps->log)) |
| 4209 | call3 (ps->log, server, proc, |
| 4210 | concat3 (build_string ("accept from "), |
| 4211 | (STRINGP (host) ? host : build_string ("-")), |
| 4212 | build_string ("\n"))); |
| 4213 | |
| 4214 | exec_sentinel (proc, |
| 4215 | concat3 (build_string ("open from "), |
| 4216 | (STRINGP (host) ? host : build_string ("-")), |
| 4217 | build_string ("\n"))); |
| 4218 | } |
| 4219 | |
| 4220 | /* This variable is different from waiting_for_input in keyboard.c. |
| 4221 | It is used to communicate to a lisp process-filter/sentinel (via the |
| 4222 | function Fwaiting_for_user_input_p below) whether Emacs was waiting |
| 4223 | for user-input when that process-filter was called. |
| 4224 | waiting_for_input cannot be used as that is by definition 0 when |
| 4225 | lisp code is being evalled. |
| 4226 | This is also used in record_asynch_buffer_change. |
| 4227 | For that purpose, this must be 0 |
| 4228 | when not inside wait_reading_process_output. */ |
| 4229 | static int waiting_for_user_input_p; |
| 4230 | |
| 4231 | static void |
| 4232 | wait_reading_process_output_unwind (int data) |
| 4233 | { |
| 4234 | waiting_for_user_input_p = data; |
| 4235 | } |
| 4236 | |
| 4237 | /* This is here so breakpoints can be put on it. */ |
| 4238 | static void |
| 4239 | wait_reading_process_output_1 (void) |
| 4240 | { |
| 4241 | } |
| 4242 | |
| 4243 | /* Read and dispose of subprocess output while waiting for timeout to |
| 4244 | elapse and/or keyboard input to be available. |
| 4245 | |
| 4246 | TIME_LIMIT is: |
| 4247 | timeout in seconds |
| 4248 | If negative, gobble data immediately available but don't wait for any. |
| 4249 | |
| 4250 | NSECS is: |
| 4251 | an additional duration to wait, measured in nanoseconds |
| 4252 | If TIME_LIMIT is zero, then: |
| 4253 | If NSECS == 0, there is no limit. |
| 4254 | If NSECS > 0, the timeout consists of NSECS only. |
| 4255 | If NSECS < 0, gobble data immediately, as if TIME_LIMIT were negative. |
| 4256 | |
| 4257 | READ_KBD is: |
| 4258 | 0 to ignore keyboard input, or |
| 4259 | 1 to return when input is available, or |
| 4260 | -1 meaning caller will actually read the input, so don't throw to |
| 4261 | the quit handler, or |
| 4262 | |
| 4263 | DO_DISPLAY means redisplay should be done to show subprocess |
| 4264 | output that arrives. |
| 4265 | |
| 4266 | If WAIT_FOR_CELL is a cons cell, wait until its car is non-nil |
| 4267 | (and gobble terminal input into the buffer if any arrives). |
| 4268 | |
| 4269 | If WAIT_PROC is specified, wait until something arrives from that |
| 4270 | process. The return value is true if we read some input from |
| 4271 | that process. |
| 4272 | |
| 4273 | If JUST_WAIT_PROC is nonzero, handle only output from WAIT_PROC |
| 4274 | (suspending output from other processes). A negative value |
| 4275 | means don't run any timers either. |
| 4276 | |
| 4277 | If WAIT_PROC is specified, then the function returns true if we |
| 4278 | received input from that process before the timeout elapsed. |
| 4279 | Otherwise, return true if we received input from any process. */ |
| 4280 | |
| 4281 | bool |
| 4282 | wait_reading_process_output (intmax_t time_limit, int nsecs, int read_kbd, |
| 4283 | bool do_display, |
| 4284 | Lisp_Object wait_for_cell, |
| 4285 | struct Lisp_Process *wait_proc, int just_wait_proc) |
| 4286 | { |
| 4287 | int channel, nfds; |
| 4288 | fd_set Available; |
| 4289 | fd_set Writeok; |
| 4290 | bool check_write; |
| 4291 | int check_delay; |
| 4292 | bool no_avail; |
| 4293 | int xerrno; |
| 4294 | Lisp_Object proc; |
| 4295 | struct timespec timeout, end_time; |
| 4296 | int wait_channel = -1; |
| 4297 | bool got_some_input = 0; |
| 4298 | ptrdiff_t count = SPECPDL_INDEX (); |
| 4299 | |
| 4300 | FD_ZERO (&Available); |
| 4301 | FD_ZERO (&Writeok); |
| 4302 | |
| 4303 | if (time_limit == 0 && nsecs == 0 && wait_proc && !NILP (Vinhibit_quit) |
| 4304 | && !(CONSP (wait_proc->status) |
| 4305 | && EQ (XCAR (wait_proc->status), Qexit))) |
| 4306 | message1 ("Blocking call to accept-process-output with quit inhibited!!"); |
| 4307 | |
| 4308 | /* If wait_proc is a process to watch, set wait_channel accordingly. */ |
| 4309 | if (wait_proc != NULL) |
| 4310 | wait_channel = wait_proc->infd; |
| 4311 | |
| 4312 | record_unwind_protect_int (wait_reading_process_output_unwind, |
| 4313 | waiting_for_user_input_p); |
| 4314 | waiting_for_user_input_p = read_kbd; |
| 4315 | |
| 4316 | if (time_limit < 0) |
| 4317 | { |
| 4318 | time_limit = 0; |
| 4319 | nsecs = -1; |
| 4320 | } |
| 4321 | else if (TYPE_MAXIMUM (time_t) < time_limit) |
| 4322 | time_limit = TYPE_MAXIMUM (time_t); |
| 4323 | |
| 4324 | /* Since we may need to wait several times, |
| 4325 | compute the absolute time to return at. */ |
| 4326 | if (time_limit || nsecs > 0) |
| 4327 | { |
| 4328 | timeout = make_timespec (time_limit, nsecs); |
| 4329 | end_time = timespec_add (current_timespec (), timeout); |
| 4330 | } |
| 4331 | |
| 4332 | while (1) |
| 4333 | { |
| 4334 | bool timeout_reduced_for_timers = 0; |
| 4335 | |
| 4336 | /* If calling from keyboard input, do not quit |
| 4337 | since we want to return C-g as an input character. |
| 4338 | Otherwise, do pending quit if requested. */ |
| 4339 | if (read_kbd >= 0) |
| 4340 | QUIT; |
| 4341 | else if (pending_signals) |
| 4342 | process_pending_signals (); |
| 4343 | |
| 4344 | /* Exit now if the cell we're waiting for became non-nil. */ |
| 4345 | if (! NILP (wait_for_cell) && ! NILP (XCAR (wait_for_cell))) |
| 4346 | break; |
| 4347 | |
| 4348 | /* Compute time from now till when time limit is up. */ |
| 4349 | /* Exit if already run out. */ |
| 4350 | if (nsecs < 0) |
| 4351 | { |
| 4352 | /* A negative timeout means |
| 4353 | gobble output available now |
| 4354 | but don't wait at all. */ |
| 4355 | |
| 4356 | timeout = make_timespec (0, 0); |
| 4357 | } |
| 4358 | else if (time_limit || nsecs > 0) |
| 4359 | { |
| 4360 | struct timespec now = current_timespec (); |
| 4361 | if (timespec_cmp (end_time, now) <= 0) |
| 4362 | break; |
| 4363 | timeout = timespec_sub (end_time, now); |
| 4364 | } |
| 4365 | else |
| 4366 | { |
| 4367 | timeout = make_timespec (100000, 0); |
| 4368 | } |
| 4369 | |
| 4370 | /* Normally we run timers here. |
| 4371 | But not if wait_for_cell; in those cases, |
| 4372 | the wait is supposed to be short, |
| 4373 | and those callers cannot handle running arbitrary Lisp code here. */ |
| 4374 | if (NILP (wait_for_cell) |
| 4375 | && just_wait_proc >= 0) |
| 4376 | { |
| 4377 | struct timespec timer_delay; |
| 4378 | |
| 4379 | do |
| 4380 | { |
| 4381 | unsigned old_timers_run = timers_run; |
| 4382 | struct buffer *old_buffer = current_buffer; |
| 4383 | Lisp_Object old_window = selected_window; |
| 4384 | |
| 4385 | timer_delay = timer_check (); |
| 4386 | |
| 4387 | /* If a timer has run, this might have changed buffers |
| 4388 | an alike. Make read_key_sequence aware of that. */ |
| 4389 | if (timers_run != old_timers_run |
| 4390 | && (old_buffer != current_buffer |
| 4391 | || !EQ (old_window, selected_window)) |
| 4392 | && waiting_for_user_input_p == -1) |
| 4393 | record_asynch_buffer_change (); |
| 4394 | |
| 4395 | if (timers_run != old_timers_run && do_display) |
| 4396 | /* We must retry, since a timer may have requeued itself |
| 4397 | and that could alter the time_delay. */ |
| 4398 | redisplay_preserve_echo_area (9); |
| 4399 | else |
| 4400 | break; |
| 4401 | } |
| 4402 | while (!detect_input_pending ()); |
| 4403 | |
| 4404 | /* If there is unread keyboard input, also return. */ |
| 4405 | if (read_kbd != 0 |
| 4406 | && requeued_events_pending_p ()) |
| 4407 | break; |
| 4408 | |
| 4409 | /* A negative timeout means do not wait at all. */ |
| 4410 | if (nsecs >= 0) |
| 4411 | { |
| 4412 | if (timespec_valid_p (timer_delay)) |
| 4413 | { |
| 4414 | if (timespec_cmp (timer_delay, timeout) < 0) |
| 4415 | { |
| 4416 | timeout = timer_delay; |
| 4417 | timeout_reduced_for_timers = 1; |
| 4418 | } |
| 4419 | } |
| 4420 | else |
| 4421 | { |
| 4422 | /* This is so a breakpoint can be put here. */ |
| 4423 | wait_reading_process_output_1 (); |
| 4424 | } |
| 4425 | } |
| 4426 | } |
| 4427 | |
| 4428 | /* Cause C-g and alarm signals to take immediate action, |
| 4429 | and cause input available signals to zero out timeout. |
| 4430 | |
| 4431 | It is important that we do this before checking for process |
| 4432 | activity. If we get a SIGCHLD after the explicit checks for |
| 4433 | process activity, timeout is the only way we will know. */ |
| 4434 | if (read_kbd < 0) |
| 4435 | set_waiting_for_input (&timeout); |
| 4436 | |
| 4437 | /* If status of something has changed, and no input is |
| 4438 | available, notify the user of the change right away. After |
| 4439 | this explicit check, we'll let the SIGCHLD handler zap |
| 4440 | timeout to get our attention. */ |
| 4441 | if (update_tick != process_tick) |
| 4442 | { |
| 4443 | fd_set Atemp; |
| 4444 | fd_set Ctemp; |
| 4445 | |
| 4446 | if (kbd_on_hold_p ()) |
| 4447 | FD_ZERO (&Atemp); |
| 4448 | else |
| 4449 | Atemp = input_wait_mask; |
| 4450 | Ctemp = write_mask; |
| 4451 | |
| 4452 | timeout = make_timespec (0, 0); |
| 4453 | if ((pselect (max (max_process_desc, max_input_desc) + 1, |
| 4454 | &Atemp, |
| 4455 | #ifdef NON_BLOCKING_CONNECT |
| 4456 | (num_pending_connects > 0 ? &Ctemp : NULL), |
| 4457 | #else |
| 4458 | NULL, |
| 4459 | #endif |
| 4460 | NULL, &timeout, NULL) |
| 4461 | <= 0)) |
| 4462 | { |
| 4463 | /* It's okay for us to do this and then continue with |
| 4464 | the loop, since timeout has already been zeroed out. */ |
| 4465 | clear_waiting_for_input (); |
| 4466 | status_notify (NULL); |
| 4467 | if (do_display) redisplay_preserve_echo_area (13); |
| 4468 | } |
| 4469 | } |
| 4470 | |
| 4471 | /* Don't wait for output from a non-running process. Just |
| 4472 | read whatever data has already been received. */ |
| 4473 | if (wait_proc && wait_proc->raw_status_new) |
| 4474 | update_status (wait_proc); |
| 4475 | if (wait_proc |
| 4476 | && ! EQ (wait_proc->status, Qrun) |
| 4477 | && ! EQ (wait_proc->status, Qconnect)) |
| 4478 | { |
| 4479 | bool read_some_bytes = 0; |
| 4480 | |
| 4481 | clear_waiting_for_input (); |
| 4482 | XSETPROCESS (proc, wait_proc); |
| 4483 | |
| 4484 | /* Read data from the process, until we exhaust it. */ |
| 4485 | while (wait_proc->infd >= 0) |
| 4486 | { |
| 4487 | int nread = read_process_output (proc, wait_proc->infd); |
| 4488 | |
| 4489 | if (nread == 0) |
| 4490 | break; |
| 4491 | |
| 4492 | if (nread > 0) |
| 4493 | got_some_input = read_some_bytes = 1; |
| 4494 | else if (nread == -1 && (errno == EIO || errno == EAGAIN)) |
| 4495 | break; |
| 4496 | #ifdef EWOULDBLOCK |
| 4497 | else if (nread == -1 && EWOULDBLOCK == errno) |
| 4498 | break; |
| 4499 | #endif |
| 4500 | } |
| 4501 | if (read_some_bytes && do_display) |
| 4502 | redisplay_preserve_echo_area (10); |
| 4503 | |
| 4504 | break; |
| 4505 | } |
| 4506 | |
| 4507 | /* Wait till there is something to do */ |
| 4508 | |
| 4509 | if (wait_proc && just_wait_proc) |
| 4510 | { |
| 4511 | if (wait_proc->infd < 0) /* Terminated */ |
| 4512 | break; |
| 4513 | FD_SET (wait_proc->infd, &Available); |
| 4514 | check_delay = 0; |
| 4515 | check_write = 0; |
| 4516 | } |
| 4517 | else if (!NILP (wait_for_cell)) |
| 4518 | { |
| 4519 | Available = non_process_wait_mask; |
| 4520 | check_delay = 0; |
| 4521 | check_write = 0; |
| 4522 | } |
| 4523 | else |
| 4524 | { |
| 4525 | if (! read_kbd) |
| 4526 | Available = non_keyboard_wait_mask; |
| 4527 | else |
| 4528 | Available = input_wait_mask; |
| 4529 | Writeok = write_mask; |
| 4530 | #ifdef SELECT_CANT_DO_WRITE_MASK |
| 4531 | check_write = 0; |
| 4532 | #else |
| 4533 | check_write = 1; |
| 4534 | #endif |
| 4535 | check_delay = wait_channel >= 0 ? 0 : process_output_delay_count; |
| 4536 | } |
| 4537 | |
| 4538 | /* If frame size has changed or the window is newly mapped, |
| 4539 | redisplay now, before we start to wait. There is a race |
| 4540 | condition here; if a SIGIO arrives between now and the select |
| 4541 | and indicates that a frame is trashed, the select may block |
| 4542 | displaying a trashed screen. */ |
| 4543 | if (frame_garbaged && do_display) |
| 4544 | { |
| 4545 | clear_waiting_for_input (); |
| 4546 | redisplay_preserve_echo_area (11); |
| 4547 | if (read_kbd < 0) |
| 4548 | set_waiting_for_input (&timeout); |
| 4549 | } |
| 4550 | |
| 4551 | /* Skip the `select' call if input is available and we're |
| 4552 | waiting for keyboard input or a cell change (which can be |
| 4553 | triggered by processing X events). In the latter case, set |
| 4554 | nfds to 1 to avoid breaking the loop. */ |
| 4555 | no_avail = 0; |
| 4556 | if ((read_kbd || !NILP (wait_for_cell)) |
| 4557 | && detect_input_pending ()) |
| 4558 | { |
| 4559 | nfds = read_kbd ? 0 : 1; |
| 4560 | no_avail = 1; |
| 4561 | } |
| 4562 | |
| 4563 | if (!no_avail) |
| 4564 | { |
| 4565 | |
| 4566 | #ifdef ADAPTIVE_READ_BUFFERING |
| 4567 | /* Set the timeout for adaptive read buffering if any |
| 4568 | process has non-zero read_output_skip and non-zero |
| 4569 | read_output_delay, and we are not reading output for a |
| 4570 | specific wait_channel. It is not executed if |
| 4571 | Vprocess_adaptive_read_buffering is nil. */ |
| 4572 | if (process_output_skip && check_delay > 0) |
| 4573 | { |
| 4574 | int nsecs = timeout.tv_nsec; |
| 4575 | if (timeout.tv_sec > 0 || nsecs > READ_OUTPUT_DELAY_MAX) |
| 4576 | nsecs = READ_OUTPUT_DELAY_MAX; |
| 4577 | for (channel = 0; check_delay > 0 && channel <= max_process_desc; channel++) |
| 4578 | { |
| 4579 | proc = chan_process[channel]; |
| 4580 | if (NILP (proc)) |
| 4581 | continue; |
| 4582 | /* Find minimum non-zero read_output_delay among the |
| 4583 | processes with non-zero read_output_skip. */ |
| 4584 | if (XPROCESS (proc)->read_output_delay > 0) |
| 4585 | { |
| 4586 | check_delay--; |
| 4587 | if (!XPROCESS (proc)->read_output_skip) |
| 4588 | continue; |
| 4589 | FD_CLR (channel, &Available); |
| 4590 | XPROCESS (proc)->read_output_skip = 0; |
| 4591 | if (XPROCESS (proc)->read_output_delay < nsecs) |
| 4592 | nsecs = XPROCESS (proc)->read_output_delay; |
| 4593 | } |
| 4594 | } |
| 4595 | timeout = make_timespec (0, nsecs); |
| 4596 | process_output_skip = 0; |
| 4597 | } |
| 4598 | #endif |
| 4599 | |
| 4600 | #if defined (HAVE_NS) |
| 4601 | nfds = ns_select |
| 4602 | #elif defined (HAVE_GLIB) |
| 4603 | nfds = xg_select |
| 4604 | #else |
| 4605 | nfds = pselect |
| 4606 | #endif |
| 4607 | (max (max_process_desc, max_input_desc) + 1, |
| 4608 | &Available, |
| 4609 | (check_write ? &Writeok : 0), |
| 4610 | NULL, &timeout, NULL); |
| 4611 | |
| 4612 | #ifdef HAVE_GNUTLS |
| 4613 | /* GnuTLS buffers data internally. In lowat mode it leaves |
| 4614 | some data in the TCP buffers so that select works, but |
| 4615 | with custom pull/push functions we need to check if some |
| 4616 | data is available in the buffers manually. */ |
| 4617 | if (nfds == 0) |
| 4618 | { |
| 4619 | if (! wait_proc) |
| 4620 | { |
| 4621 | /* We're not waiting on a specific process, so loop |
| 4622 | through all the channels and check for data. |
| 4623 | This is a workaround needed for some versions of |
| 4624 | the gnutls library -- 2.12.14 has been confirmed |
| 4625 | to need it. See |
| 4626 | http://comments.gmane.org/gmane.emacs.devel/145074 */ |
| 4627 | for (channel = 0; channel < FD_SETSIZE; ++channel) |
| 4628 | if (! NILP (chan_process[channel])) |
| 4629 | { |
| 4630 | struct Lisp_Process *p = |
| 4631 | XPROCESS (chan_process[channel]); |
| 4632 | if (p && p->gnutls_p && p->gnutls_state && p->infd |
| 4633 | && ((emacs_gnutls_record_check_pending |
| 4634 | (p->gnutls_state)) |
| 4635 | > 0)) |
| 4636 | { |
| 4637 | nfds++; |
| 4638 | FD_SET (p->infd, &Available); |
| 4639 | } |
| 4640 | } |
| 4641 | } |
| 4642 | else |
| 4643 | { |
| 4644 | /* Check this specific channel. */ |
| 4645 | if (wait_proc->gnutls_p /* Check for valid process. */ |
| 4646 | && wait_proc->gnutls_state |
| 4647 | /* Do we have pending data? */ |
| 4648 | && ((emacs_gnutls_record_check_pending |
| 4649 | (wait_proc->gnutls_state)) |
| 4650 | > 0)) |
| 4651 | { |
| 4652 | nfds = 1; |
| 4653 | /* Set to Available. */ |
| 4654 | FD_SET (wait_proc->infd, &Available); |
| 4655 | } |
| 4656 | } |
| 4657 | } |
| 4658 | #endif |
| 4659 | } |
| 4660 | |
| 4661 | xerrno = errno; |
| 4662 | |
| 4663 | /* Make C-g and alarm signals set flags again */ |
| 4664 | clear_waiting_for_input (); |
| 4665 | |
| 4666 | /* If we woke up due to SIGWINCH, actually change size now. */ |
| 4667 | do_pending_window_change (0); |
| 4668 | |
| 4669 | if ((time_limit || nsecs) && nfds == 0 && ! timeout_reduced_for_timers) |
| 4670 | /* We waited the full specified time, so return now. */ |
| 4671 | break; |
| 4672 | if (nfds < 0) |
| 4673 | { |
| 4674 | if (xerrno == EINTR) |
| 4675 | no_avail = 1; |
| 4676 | else if (xerrno == EBADF) |
| 4677 | emacs_abort (); |
| 4678 | else |
| 4679 | report_file_errno ("Failed select", Qnil, xerrno); |
| 4680 | } |
| 4681 | |
| 4682 | if (no_avail) |
| 4683 | { |
| 4684 | FD_ZERO (&Available); |
| 4685 | check_write = 0; |
| 4686 | } |
| 4687 | |
| 4688 | /* Check for keyboard input */ |
| 4689 | /* If there is any, return immediately |
| 4690 | to give it higher priority than subprocesses */ |
| 4691 | |
| 4692 | if (read_kbd != 0) |
| 4693 | { |
| 4694 | unsigned old_timers_run = timers_run; |
| 4695 | struct buffer *old_buffer = current_buffer; |
| 4696 | Lisp_Object old_window = selected_window; |
| 4697 | bool leave = 0; |
| 4698 | |
| 4699 | if (detect_input_pending_run_timers (do_display)) |
| 4700 | { |
| 4701 | swallow_events (do_display); |
| 4702 | if (detect_input_pending_run_timers (do_display)) |
| 4703 | leave = 1; |
| 4704 | } |
| 4705 | |
| 4706 | /* If a timer has run, this might have changed buffers |
| 4707 | an alike. Make read_key_sequence aware of that. */ |
| 4708 | if (timers_run != old_timers_run |
| 4709 | && waiting_for_user_input_p == -1 |
| 4710 | && (old_buffer != current_buffer |
| 4711 | || !EQ (old_window, selected_window))) |
| 4712 | record_asynch_buffer_change (); |
| 4713 | |
| 4714 | if (leave) |
| 4715 | break; |
| 4716 | } |
| 4717 | |
| 4718 | /* If there is unread keyboard input, also return. */ |
| 4719 | if (read_kbd != 0 |
| 4720 | && requeued_events_pending_p ()) |
| 4721 | break; |
| 4722 | |
| 4723 | /* If we are not checking for keyboard input now, |
| 4724 | do process events (but don't run any timers). |
| 4725 | This is so that X events will be processed. |
| 4726 | Otherwise they may have to wait until polling takes place. |
| 4727 | That would causes delays in pasting selections, for example. |
| 4728 | |
| 4729 | (We used to do this only if wait_for_cell.) */ |
| 4730 | if (read_kbd == 0 && detect_input_pending ()) |
| 4731 | { |
| 4732 | swallow_events (do_display); |
| 4733 | #if 0 /* Exiting when read_kbd doesn't request that seems wrong, though. */ |
| 4734 | if (detect_input_pending ()) |
| 4735 | break; |
| 4736 | #endif |
| 4737 | } |
| 4738 | |
| 4739 | /* Exit now if the cell we're waiting for became non-nil. */ |
| 4740 | if (! NILP (wait_for_cell) && ! NILP (XCAR (wait_for_cell))) |
| 4741 | break; |
| 4742 | |
| 4743 | #ifdef USABLE_SIGIO |
| 4744 | /* If we think we have keyboard input waiting, but didn't get SIGIO, |
| 4745 | go read it. This can happen with X on BSD after logging out. |
| 4746 | In that case, there really is no input and no SIGIO, |
| 4747 | but select says there is input. */ |
| 4748 | |
| 4749 | if (read_kbd && interrupt_input |
| 4750 | && keyboard_bit_set (&Available) && ! noninteractive) |
| 4751 | handle_input_available_signal (SIGIO); |
| 4752 | #endif |
| 4753 | |
| 4754 | if (! wait_proc) |
| 4755 | got_some_input |= nfds > 0; |
| 4756 | |
| 4757 | /* If checking input just got us a size-change event from X, |
| 4758 | obey it now if we should. */ |
| 4759 | if (read_kbd || ! NILP (wait_for_cell)) |
| 4760 | do_pending_window_change (0); |
| 4761 | |
| 4762 | /* Check for data from a process. */ |
| 4763 | if (no_avail || nfds == 0) |
| 4764 | continue; |
| 4765 | |
| 4766 | for (channel = 0; channel <= max_input_desc; ++channel) |
| 4767 | { |
| 4768 | struct fd_callback_data *d = &fd_callback_info[channel]; |
| 4769 | if (d->func |
| 4770 | && ((d->condition & FOR_READ |
| 4771 | && FD_ISSET (channel, &Available)) |
| 4772 | || (d->condition & FOR_WRITE |
| 4773 | && FD_ISSET (channel, &write_mask)))) |
| 4774 | d->func (channel, d->data); |
| 4775 | } |
| 4776 | |
| 4777 | for (channel = 0; channel <= max_process_desc; channel++) |
| 4778 | { |
| 4779 | if (FD_ISSET (channel, &Available) |
| 4780 | && FD_ISSET (channel, &non_keyboard_wait_mask) |
| 4781 | && !FD_ISSET (channel, &non_process_wait_mask)) |
| 4782 | { |
| 4783 | int nread; |
| 4784 | |
| 4785 | /* If waiting for this channel, arrange to return as |
| 4786 | soon as no more input to be processed. No more |
| 4787 | waiting. */ |
| 4788 | if (wait_channel == channel) |
| 4789 | { |
| 4790 | wait_channel = -1; |
| 4791 | nsecs = -1; |
| 4792 | got_some_input = 1; |
| 4793 | } |
| 4794 | proc = chan_process[channel]; |
| 4795 | if (NILP (proc)) |
| 4796 | continue; |
| 4797 | |
| 4798 | /* If this is a server stream socket, accept connection. */ |
| 4799 | if (EQ (XPROCESS (proc)->status, Qlisten)) |
| 4800 | { |
| 4801 | server_accept_connection (proc, channel); |
| 4802 | continue; |
| 4803 | } |
| 4804 | |
| 4805 | /* Read data from the process, starting with our |
| 4806 | buffered-ahead character if we have one. */ |
| 4807 | |
| 4808 | nread = read_process_output (proc, channel); |
| 4809 | if (nread > 0) |
| 4810 | { |
| 4811 | /* Since read_process_output can run a filter, |
| 4812 | which can call accept-process-output, |
| 4813 | don't try to read from any other processes |
| 4814 | before doing the select again. */ |
| 4815 | FD_ZERO (&Available); |
| 4816 | |
| 4817 | if (do_display) |
| 4818 | redisplay_preserve_echo_area (12); |
| 4819 | } |
| 4820 | #ifdef EWOULDBLOCK |
| 4821 | else if (nread == -1 && errno == EWOULDBLOCK) |
| 4822 | ; |
| 4823 | #endif |
| 4824 | else if (nread == -1 && errno == EAGAIN) |
| 4825 | ; |
| 4826 | #ifdef WINDOWSNT |
| 4827 | /* FIXME: Is this special case still needed? */ |
| 4828 | /* Note that we cannot distinguish between no input |
| 4829 | available now and a closed pipe. |
| 4830 | With luck, a closed pipe will be accompanied by |
| 4831 | subprocess termination and SIGCHLD. */ |
| 4832 | else if (nread == 0 && !NETCONN_P (proc) && !SERIALCONN_P (proc)) |
| 4833 | ; |
| 4834 | #endif |
| 4835 | #ifdef HAVE_PTYS |
| 4836 | /* On some OSs with ptys, when the process on one end of |
| 4837 | a pty exits, the other end gets an error reading with |
| 4838 | errno = EIO instead of getting an EOF (0 bytes read). |
| 4839 | Therefore, if we get an error reading and errno = |
| 4840 | EIO, just continue, because the child process has |
| 4841 | exited and should clean itself up soon (e.g. when we |
| 4842 | get a SIGCHLD). */ |
| 4843 | else if (nread == -1 && errno == EIO) |
| 4844 | { |
| 4845 | struct Lisp_Process *p = XPROCESS (proc); |
| 4846 | |
| 4847 | /* Clear the descriptor now, so we only raise the |
| 4848 | signal once. */ |
| 4849 | FD_CLR (channel, &input_wait_mask); |
| 4850 | FD_CLR (channel, &non_keyboard_wait_mask); |
| 4851 | |
| 4852 | if (p->pid == -2) |
| 4853 | { |
| 4854 | /* If the EIO occurs on a pty, the SIGCHLD handler's |
| 4855 | waitpid call will not find the process object to |
| 4856 | delete. Do it here. */ |
| 4857 | p->tick = ++process_tick; |
| 4858 | pset_status (p, Qfailed); |
| 4859 | } |
| 4860 | } |
| 4861 | #endif /* HAVE_PTYS */ |
| 4862 | /* If we can detect process termination, don't consider the |
| 4863 | process gone just because its pipe is closed. */ |
| 4864 | else if (nread == 0 && !NETCONN_P (proc) && !SERIALCONN_P (proc)) |
| 4865 | ; |
| 4866 | else |
| 4867 | { |
| 4868 | /* Preserve status of processes already terminated. */ |
| 4869 | XPROCESS (proc)->tick = ++process_tick; |
| 4870 | deactivate_process (proc); |
| 4871 | if (XPROCESS (proc)->raw_status_new) |
| 4872 | update_status (XPROCESS (proc)); |
| 4873 | if (EQ (XPROCESS (proc)->status, Qrun)) |
| 4874 | pset_status (XPROCESS (proc), |
| 4875 | list2 (Qexit, make_number (256))); |
| 4876 | } |
| 4877 | } |
| 4878 | #ifdef NON_BLOCKING_CONNECT |
| 4879 | if (FD_ISSET (channel, &Writeok) |
| 4880 | && FD_ISSET (channel, &connect_wait_mask)) |
| 4881 | { |
| 4882 | struct Lisp_Process *p; |
| 4883 | |
| 4884 | FD_CLR (channel, &connect_wait_mask); |
| 4885 | FD_CLR (channel, &write_mask); |
| 4886 | if (--num_pending_connects < 0) |
| 4887 | emacs_abort (); |
| 4888 | |
| 4889 | proc = chan_process[channel]; |
| 4890 | if (NILP (proc)) |
| 4891 | continue; |
| 4892 | |
| 4893 | p = XPROCESS (proc); |
| 4894 | |
| 4895 | #ifdef GNU_LINUX |
| 4896 | /* getsockopt(,,SO_ERROR,,) is said to hang on some systems. |
| 4897 | So only use it on systems where it is known to work. */ |
| 4898 | { |
| 4899 | socklen_t xlen = sizeof (xerrno); |
| 4900 | if (getsockopt (channel, SOL_SOCKET, SO_ERROR, &xerrno, &xlen)) |
| 4901 | xerrno = errno; |
| 4902 | } |
| 4903 | #else |
| 4904 | { |
| 4905 | struct sockaddr pname; |
| 4906 | socklen_t pnamelen = sizeof (pname); |
| 4907 | |
| 4908 | /* If connection failed, getpeername will fail. */ |
| 4909 | xerrno = 0; |
| 4910 | if (getpeername (channel, &pname, &pnamelen) < 0) |
| 4911 | { |
| 4912 | /* Obtain connect failure code through error slippage. */ |
| 4913 | char dummy; |
| 4914 | xerrno = errno; |
| 4915 | if (errno == ENOTCONN && read (channel, &dummy, 1) < 0) |
| 4916 | xerrno = errno; |
| 4917 | } |
| 4918 | } |
| 4919 | #endif |
| 4920 | if (xerrno) |
| 4921 | { |
| 4922 | p->tick = ++process_tick; |
| 4923 | pset_status (p, list2 (Qfailed, make_number (xerrno))); |
| 4924 | deactivate_process (proc); |
| 4925 | } |
| 4926 | else |
| 4927 | { |
| 4928 | pset_status (p, Qrun); |
| 4929 | /* Execute the sentinel here. If we had relied on |
| 4930 | status_notify to do it later, it will read input |
| 4931 | from the process before calling the sentinel. */ |
| 4932 | exec_sentinel (proc, build_string ("open\n")); |
| 4933 | if (!EQ (p->filter, Qt) && !EQ (p->command, Qt)) |
| 4934 | { |
| 4935 | FD_SET (p->infd, &input_wait_mask); |
| 4936 | FD_SET (p->infd, &non_keyboard_wait_mask); |
| 4937 | } |
| 4938 | } |
| 4939 | } |
| 4940 | #endif /* NON_BLOCKING_CONNECT */ |
| 4941 | } /* End for each file descriptor. */ |
| 4942 | } /* End while exit conditions not met. */ |
| 4943 | |
| 4944 | unbind_to (count, Qnil); |
| 4945 | |
| 4946 | /* If calling from keyboard input, do not quit |
| 4947 | since we want to return C-g as an input character. |
| 4948 | Otherwise, do pending quit if requested. */ |
| 4949 | if (read_kbd >= 0) |
| 4950 | { |
| 4951 | /* Prevent input_pending from remaining set if we quit. */ |
| 4952 | clear_input_pending (); |
| 4953 | QUIT; |
| 4954 | } |
| 4955 | |
| 4956 | return got_some_input; |
| 4957 | } |
| 4958 | \f |
| 4959 | /* Given a list (FUNCTION ARGS...), apply FUNCTION to the ARGS. */ |
| 4960 | |
| 4961 | static Lisp_Object |
| 4962 | read_process_output_call (Lisp_Object fun_and_args) |
| 4963 | { |
| 4964 | return apply1 (XCAR (fun_and_args), XCDR (fun_and_args)); |
| 4965 | } |
| 4966 | |
| 4967 | static Lisp_Object |
| 4968 | read_process_output_error_handler (Lisp_Object error_val) |
| 4969 | { |
| 4970 | cmd_error_internal (error_val, "error in process filter: "); |
| 4971 | Vinhibit_quit = Qt; |
| 4972 | update_echo_area (); |
| 4973 | Fsleep_for (make_number (2), Qnil); |
| 4974 | return Qt; |
| 4975 | } |
| 4976 | |
| 4977 | static void |
| 4978 | read_and_dispose_of_process_output (struct Lisp_Process *p, char *chars, |
| 4979 | ssize_t nbytes, |
| 4980 | struct coding_system *coding); |
| 4981 | |
| 4982 | /* Read pending output from the process channel, |
| 4983 | starting with our buffered-ahead character if we have one. |
| 4984 | Yield number of decoded characters read. |
| 4985 | |
| 4986 | This function reads at most 4096 characters. |
| 4987 | If you want to read all available subprocess output, |
| 4988 | you must call it repeatedly until it returns zero. |
| 4989 | |
| 4990 | The characters read are decoded according to PROC's coding-system |
| 4991 | for decoding. */ |
| 4992 | |
| 4993 | static int |
| 4994 | read_process_output (Lisp_Object proc, register int channel) |
| 4995 | { |
| 4996 | register ssize_t nbytes; |
| 4997 | char *chars; |
| 4998 | register struct Lisp_Process *p = XPROCESS (proc); |
| 4999 | struct coding_system *coding = proc_decode_coding_system[channel]; |
| 5000 | int carryover = p->decoding_carryover; |
| 5001 | int readmax = 4096; |
| 5002 | ptrdiff_t count = SPECPDL_INDEX (); |
| 5003 | Lisp_Object odeactivate; |
| 5004 | |
| 5005 | chars = alloca (carryover + readmax); |
| 5006 | if (carryover) |
| 5007 | /* See the comment above. */ |
| 5008 | memcpy (chars, SDATA (p->decoding_buf), carryover); |
| 5009 | |
| 5010 | #ifdef DATAGRAM_SOCKETS |
| 5011 | /* We have a working select, so proc_buffered_char is always -1. */ |
| 5012 | if (DATAGRAM_CHAN_P (channel)) |
| 5013 | { |
| 5014 | socklen_t len = datagram_address[channel].len; |
| 5015 | nbytes = recvfrom (channel, chars + carryover, readmax, |
| 5016 | 0, datagram_address[channel].sa, &len); |
| 5017 | } |
| 5018 | else |
| 5019 | #endif |
| 5020 | { |
| 5021 | bool buffered = proc_buffered_char[channel] >= 0; |
| 5022 | if (buffered) |
| 5023 | { |
| 5024 | chars[carryover] = proc_buffered_char[channel]; |
| 5025 | proc_buffered_char[channel] = -1; |
| 5026 | } |
| 5027 | #ifdef HAVE_GNUTLS |
| 5028 | if (p->gnutls_p && p->gnutls_state) |
| 5029 | nbytes = emacs_gnutls_read (p, chars + carryover + buffered, |
| 5030 | readmax - buffered); |
| 5031 | else |
| 5032 | #endif |
| 5033 | nbytes = emacs_read (channel, chars + carryover + buffered, |
| 5034 | readmax - buffered); |
| 5035 | #ifdef ADAPTIVE_READ_BUFFERING |
| 5036 | if (nbytes > 0 && p->adaptive_read_buffering) |
| 5037 | { |
| 5038 | int delay = p->read_output_delay; |
| 5039 | if (nbytes < 256) |
| 5040 | { |
| 5041 | if (delay < READ_OUTPUT_DELAY_MAX_MAX) |
| 5042 | { |
| 5043 | if (delay == 0) |
| 5044 | process_output_delay_count++; |
| 5045 | delay += READ_OUTPUT_DELAY_INCREMENT * 2; |
| 5046 | } |
| 5047 | } |
| 5048 | else if (delay > 0 && nbytes == readmax - buffered) |
| 5049 | { |
| 5050 | delay -= READ_OUTPUT_DELAY_INCREMENT; |
| 5051 | if (delay == 0) |
| 5052 | process_output_delay_count--; |
| 5053 | } |
| 5054 | p->read_output_delay = delay; |
| 5055 | if (delay) |
| 5056 | { |
| 5057 | p->read_output_skip = 1; |
| 5058 | process_output_skip = 1; |
| 5059 | } |
| 5060 | } |
| 5061 | #endif |
| 5062 | nbytes += buffered; |
| 5063 | nbytes += buffered && nbytes <= 0; |
| 5064 | } |
| 5065 | |
| 5066 | p->decoding_carryover = 0; |
| 5067 | |
| 5068 | /* At this point, NBYTES holds number of bytes just received |
| 5069 | (including the one in proc_buffered_char[channel]). */ |
| 5070 | if (nbytes <= 0) |
| 5071 | { |
| 5072 | if (nbytes < 0 || coding->mode & CODING_MODE_LAST_BLOCK) |
| 5073 | return nbytes; |
| 5074 | coding->mode |= CODING_MODE_LAST_BLOCK; |
| 5075 | } |
| 5076 | |
| 5077 | /* Now set NBYTES how many bytes we must decode. */ |
| 5078 | nbytes += carryover; |
| 5079 | |
| 5080 | odeactivate = Vdeactivate_mark; |
| 5081 | /* There's no good reason to let process filters change the current |
| 5082 | buffer, and many callers of accept-process-output, sit-for, and |
| 5083 | friends don't expect current-buffer to be changed from under them. */ |
| 5084 | record_unwind_current_buffer (); |
| 5085 | |
| 5086 | read_and_dispose_of_process_output (p, chars, nbytes, coding); |
| 5087 | |
| 5088 | /* Handling the process output should not deactivate the mark. */ |
| 5089 | Vdeactivate_mark = odeactivate; |
| 5090 | |
| 5091 | unbind_to (count, Qnil); |
| 5092 | return nbytes; |
| 5093 | } |
| 5094 | |
| 5095 | static void |
| 5096 | read_and_dispose_of_process_output (struct Lisp_Process *p, char *chars, |
| 5097 | ssize_t nbytes, |
| 5098 | struct coding_system *coding) |
| 5099 | { |
| 5100 | Lisp_Object outstream = p->filter; |
| 5101 | Lisp_Object text; |
| 5102 | bool outer_running_asynch_code = running_asynch_code; |
| 5103 | int waiting = waiting_for_user_input_p; |
| 5104 | |
| 5105 | /* No need to gcpro these, because all we do with them later |
| 5106 | is test them for EQness, and none of them should be a string. */ |
| 5107 | #if 0 |
| 5108 | Lisp_Object obuffer, okeymap; |
| 5109 | XSETBUFFER (obuffer, current_buffer); |
| 5110 | okeymap = BVAR (current_buffer, keymap); |
| 5111 | #endif |
| 5112 | |
| 5113 | /* We inhibit quit here instead of just catching it so that |
| 5114 | hitting ^G when a filter happens to be running won't screw |
| 5115 | it up. */ |
| 5116 | specbind (Qinhibit_quit, Qt); |
| 5117 | specbind (Qlast_nonmenu_event, Qt); |
| 5118 | |
| 5119 | /* In case we get recursively called, |
| 5120 | and we already saved the match data nonrecursively, |
| 5121 | save the same match data in safely recursive fashion. */ |
| 5122 | if (outer_running_asynch_code) |
| 5123 | { |
| 5124 | Lisp_Object tem; |
| 5125 | /* Don't clobber the CURRENT match data, either! */ |
| 5126 | tem = Fmatch_data (Qnil, Qnil, Qnil); |
| 5127 | restore_search_regs (); |
| 5128 | record_unwind_save_match_data (); |
| 5129 | Fset_match_data (tem, Qt); |
| 5130 | } |
| 5131 | |
| 5132 | /* For speed, if a search happens within this code, |
| 5133 | save the match data in a special nonrecursive fashion. */ |
| 5134 | running_asynch_code = 1; |
| 5135 | |
| 5136 | decode_coding_c_string (coding, (unsigned char *) chars, nbytes, Qt); |
| 5137 | text = coding->dst_object; |
| 5138 | Vlast_coding_system_used = CODING_ID_NAME (coding->id); |
| 5139 | /* A new coding system might be found. */ |
| 5140 | if (!EQ (p->decode_coding_system, Vlast_coding_system_used)) |
| 5141 | { |
| 5142 | pset_decode_coding_system (p, Vlast_coding_system_used); |
| 5143 | |
| 5144 | /* Don't call setup_coding_system for |
| 5145 | proc_decode_coding_system[channel] here. It is done in |
| 5146 | detect_coding called via decode_coding above. */ |
| 5147 | |
| 5148 | /* If a coding system for encoding is not yet decided, we set |
| 5149 | it as the same as coding-system for decoding. |
| 5150 | |
| 5151 | But, before doing that we must check if |
| 5152 | proc_encode_coding_system[p->outfd] surely points to a |
| 5153 | valid memory because p->outfd will be changed once EOF is |
| 5154 | sent to the process. */ |
| 5155 | if (NILP (p->encode_coding_system) |
| 5156 | && proc_encode_coding_system[p->outfd]) |
| 5157 | { |
| 5158 | pset_encode_coding_system |
| 5159 | (p, coding_inherit_eol_type (Vlast_coding_system_used, Qnil)); |
| 5160 | setup_coding_system (p->encode_coding_system, |
| 5161 | proc_encode_coding_system[p->outfd]); |
| 5162 | } |
| 5163 | } |
| 5164 | |
| 5165 | if (coding->carryover_bytes > 0) |
| 5166 | { |
| 5167 | if (SCHARS (p->decoding_buf) < coding->carryover_bytes) |
| 5168 | pset_decoding_buf (p, make_uninit_string (coding->carryover_bytes)); |
| 5169 | memcpy (SDATA (p->decoding_buf), coding->carryover, |
| 5170 | coding->carryover_bytes); |
| 5171 | p->decoding_carryover = coding->carryover_bytes; |
| 5172 | } |
| 5173 | if (SBYTES (text) > 0) |
| 5174 | /* FIXME: It's wrong to wrap or not based on debug-on-error, and |
| 5175 | sometimes it's simply wrong to wrap (e.g. when called from |
| 5176 | accept-process-output). */ |
| 5177 | internal_condition_case_1 (read_process_output_call, |
| 5178 | list3 (outstream, make_lisp_proc (p), text), |
| 5179 | !NILP (Vdebug_on_error) ? Qnil : Qerror, |
| 5180 | read_process_output_error_handler); |
| 5181 | |
| 5182 | /* If we saved the match data nonrecursively, restore it now. */ |
| 5183 | restore_search_regs (); |
| 5184 | running_asynch_code = outer_running_asynch_code; |
| 5185 | |
| 5186 | /* Restore waiting_for_user_input_p as it was |
| 5187 | when we were called, in case the filter clobbered it. */ |
| 5188 | waiting_for_user_input_p = waiting; |
| 5189 | |
| 5190 | #if 0 /* Call record_asynch_buffer_change unconditionally, |
| 5191 | because we might have changed minor modes or other things |
| 5192 | that affect key bindings. */ |
| 5193 | if (! EQ (Fcurrent_buffer (), obuffer) |
| 5194 | || ! EQ (current_buffer->keymap, okeymap)) |
| 5195 | #endif |
| 5196 | /* But do it only if the caller is actually going to read events. |
| 5197 | Otherwise there's no need to make him wake up, and it could |
| 5198 | cause trouble (for example it would make sit_for return). */ |
| 5199 | if (waiting_for_user_input_p == -1) |
| 5200 | record_asynch_buffer_change (); |
| 5201 | } |
| 5202 | |
| 5203 | DEFUN ("internal-default-process-filter", Finternal_default_process_filter, |
| 5204 | Sinternal_default_process_filter, 2, 2, 0, |
| 5205 | doc: /* Function used as default process filter. |
| 5206 | This inserts the process's output into its buffer, if there is one. |
| 5207 | Otherwise it discards the output. */) |
| 5208 | (Lisp_Object proc, Lisp_Object text) |
| 5209 | { |
| 5210 | struct Lisp_Process *p; |
| 5211 | ptrdiff_t opoint; |
| 5212 | |
| 5213 | CHECK_PROCESS (proc); |
| 5214 | p = XPROCESS (proc); |
| 5215 | CHECK_STRING (text); |
| 5216 | |
| 5217 | if (!NILP (p->buffer) && BUFFER_LIVE_P (XBUFFER (p->buffer))) |
| 5218 | { |
| 5219 | Lisp_Object old_read_only; |
| 5220 | ptrdiff_t old_begv, old_zv; |
| 5221 | ptrdiff_t old_begv_byte, old_zv_byte; |
| 5222 | ptrdiff_t before, before_byte; |
| 5223 | ptrdiff_t opoint_byte; |
| 5224 | struct buffer *b; |
| 5225 | |
| 5226 | Fset_buffer (p->buffer); |
| 5227 | opoint = PT; |
| 5228 | opoint_byte = PT_BYTE; |
| 5229 | old_read_only = BVAR (current_buffer, read_only); |
| 5230 | old_begv = BEGV; |
| 5231 | old_zv = ZV; |
| 5232 | old_begv_byte = BEGV_BYTE; |
| 5233 | old_zv_byte = ZV_BYTE; |
| 5234 | |
| 5235 | bset_read_only (current_buffer, Qnil); |
| 5236 | |
| 5237 | /* Insert new output into buffer at the current end-of-output |
| 5238 | marker, thus preserving logical ordering of input and output. */ |
| 5239 | if (XMARKER (p->mark)->buffer) |
| 5240 | set_point_from_marker (p->mark); |
| 5241 | else |
| 5242 | SET_PT_BOTH (ZV, ZV_BYTE); |
| 5243 | before = PT; |
| 5244 | before_byte = PT_BYTE; |
| 5245 | |
| 5246 | /* If the output marker is outside of the visible region, save |
| 5247 | the restriction and widen. */ |
| 5248 | if (! (BEGV <= PT && PT <= ZV)) |
| 5249 | Fwiden (); |
| 5250 | |
| 5251 | /* Adjust the multibyteness of TEXT to that of the buffer. */ |
| 5252 | if (NILP (BVAR (current_buffer, enable_multibyte_characters)) |
| 5253 | != ! STRING_MULTIBYTE (text)) |
| 5254 | text = (STRING_MULTIBYTE (text) |
| 5255 | ? Fstring_as_unibyte (text) |
| 5256 | : Fstring_to_multibyte (text)); |
| 5257 | /* Insert before markers in case we are inserting where |
| 5258 | the buffer's mark is, and the user's next command is Meta-y. */ |
| 5259 | insert_from_string_before_markers (text, 0, 0, |
| 5260 | SCHARS (text), SBYTES (text), 0); |
| 5261 | |
| 5262 | /* Make sure the process marker's position is valid when the |
| 5263 | process buffer is changed in the signal_after_change above. |
| 5264 | W3 is known to do that. */ |
| 5265 | if (BUFFERP (p->buffer) |
| 5266 | && (b = XBUFFER (p->buffer), b != current_buffer)) |
| 5267 | set_marker_both (p->mark, p->buffer, BUF_PT (b), BUF_PT_BYTE (b)); |
| 5268 | else |
| 5269 | set_marker_both (p->mark, p->buffer, PT, PT_BYTE); |
| 5270 | |
| 5271 | update_mode_lines = 23; |
| 5272 | |
| 5273 | /* Make sure opoint and the old restrictions |
| 5274 | float ahead of any new text just as point would. */ |
| 5275 | if (opoint >= before) |
| 5276 | { |
| 5277 | opoint += PT - before; |
| 5278 | opoint_byte += PT_BYTE - before_byte; |
| 5279 | } |
| 5280 | if (old_begv > before) |
| 5281 | { |
| 5282 | old_begv += PT - before; |
| 5283 | old_begv_byte += PT_BYTE - before_byte; |
| 5284 | } |
| 5285 | if (old_zv >= before) |
| 5286 | { |
| 5287 | old_zv += PT - before; |
| 5288 | old_zv_byte += PT_BYTE - before_byte; |
| 5289 | } |
| 5290 | |
| 5291 | /* If the restriction isn't what it should be, set it. */ |
| 5292 | if (old_begv != BEGV || old_zv != ZV) |
| 5293 | Fnarrow_to_region (make_number (old_begv), make_number (old_zv)); |
| 5294 | |
| 5295 | bset_read_only (current_buffer, old_read_only); |
| 5296 | SET_PT_BOTH (opoint, opoint_byte); |
| 5297 | } |
| 5298 | return Qnil; |
| 5299 | } |
| 5300 | \f |
| 5301 | /* Sending data to subprocess. */ |
| 5302 | |
| 5303 | /* In send_process, when a write fails temporarily, |
| 5304 | wait_reading_process_output is called. It may execute user code, |
| 5305 | e.g. timers, that attempts to write new data to the same process. |
| 5306 | We must ensure that data is sent in the right order, and not |
| 5307 | interspersed half-completed with other writes (Bug#10815). This is |
| 5308 | handled by the write_queue element of struct process. It is a list |
| 5309 | with each entry having the form |
| 5310 | |
| 5311 | (string . (offset . length)) |
| 5312 | |
| 5313 | where STRING is a lisp string, OFFSET is the offset into the |
| 5314 | string's byte sequence from which we should begin to send, and |
| 5315 | LENGTH is the number of bytes left to send. */ |
| 5316 | |
| 5317 | /* Create a new entry in write_queue. |
| 5318 | INPUT_OBJ should be a buffer, string Qt, or Qnil. |
| 5319 | BUF is a pointer to the string sequence of the input_obj or a C |
| 5320 | string in case of Qt or Qnil. */ |
| 5321 | |
| 5322 | static void |
| 5323 | write_queue_push (struct Lisp_Process *p, Lisp_Object input_obj, |
| 5324 | const char *buf, ptrdiff_t len, bool front) |
| 5325 | { |
| 5326 | ptrdiff_t offset; |
| 5327 | Lisp_Object entry, obj; |
| 5328 | |
| 5329 | if (STRINGP (input_obj)) |
| 5330 | { |
| 5331 | offset = buf - SSDATA (input_obj); |
| 5332 | obj = input_obj; |
| 5333 | } |
| 5334 | else |
| 5335 | { |
| 5336 | offset = 0; |
| 5337 | obj = make_unibyte_string (buf, len); |
| 5338 | } |
| 5339 | |
| 5340 | entry = Fcons (obj, Fcons (make_number (offset), make_number (len))); |
| 5341 | |
| 5342 | if (front) |
| 5343 | pset_write_queue (p, Fcons (entry, p->write_queue)); |
| 5344 | else |
| 5345 | pset_write_queue (p, nconc2 (p->write_queue, list1 (entry))); |
| 5346 | } |
| 5347 | |
| 5348 | /* Remove the first element in the write_queue of process P, put its |
| 5349 | contents in OBJ, BUF and LEN, and return true. If the |
| 5350 | write_queue is empty, return false. */ |
| 5351 | |
| 5352 | static bool |
| 5353 | write_queue_pop (struct Lisp_Process *p, Lisp_Object *obj, |
| 5354 | const char **buf, ptrdiff_t *len) |
| 5355 | { |
| 5356 | Lisp_Object entry, offset_length; |
| 5357 | ptrdiff_t offset; |
| 5358 | |
| 5359 | if (NILP (p->write_queue)) |
| 5360 | return 0; |
| 5361 | |
| 5362 | entry = XCAR (p->write_queue); |
| 5363 | pset_write_queue (p, XCDR (p->write_queue)); |
| 5364 | |
| 5365 | *obj = XCAR (entry); |
| 5366 | offset_length = XCDR (entry); |
| 5367 | |
| 5368 | *len = XINT (XCDR (offset_length)); |
| 5369 | offset = XINT (XCAR (offset_length)); |
| 5370 | *buf = SSDATA (*obj) + offset; |
| 5371 | |
| 5372 | return 1; |
| 5373 | } |
| 5374 | |
| 5375 | /* Send some data to process PROC. |
| 5376 | BUF is the beginning of the data; LEN is the number of characters. |
| 5377 | OBJECT is the Lisp object that the data comes from. If OBJECT is |
| 5378 | nil or t, it means that the data comes from C string. |
| 5379 | |
| 5380 | If OBJECT is not nil, the data is encoded by PROC's coding-system |
| 5381 | for encoding before it is sent. |
| 5382 | |
| 5383 | This function can evaluate Lisp code and can garbage collect. */ |
| 5384 | |
| 5385 | static void |
| 5386 | send_process (Lisp_Object proc, const char *buf, ptrdiff_t len, |
| 5387 | Lisp_Object object) |
| 5388 | { |
| 5389 | struct Lisp_Process *p = XPROCESS (proc); |
| 5390 | ssize_t rv; |
| 5391 | struct coding_system *coding; |
| 5392 | |
| 5393 | if (p->raw_status_new) |
| 5394 | update_status (p); |
| 5395 | if (! EQ (p->status, Qrun)) |
| 5396 | error ("Process %s not running", SDATA (p->name)); |
| 5397 | if (p->outfd < 0) |
| 5398 | error ("Output file descriptor of %s is closed", SDATA (p->name)); |
| 5399 | |
| 5400 | coding = proc_encode_coding_system[p->outfd]; |
| 5401 | Vlast_coding_system_used = CODING_ID_NAME (coding->id); |
| 5402 | |
| 5403 | if ((STRINGP (object) && STRING_MULTIBYTE (object)) |
| 5404 | || (BUFFERP (object) |
| 5405 | && !NILP (BVAR (XBUFFER (object), enable_multibyte_characters))) |
| 5406 | || EQ (object, Qt)) |
| 5407 | { |
| 5408 | pset_encode_coding_system |
| 5409 | (p, complement_process_encoding_system (p->encode_coding_system)); |
| 5410 | if (!EQ (Vlast_coding_system_used, p->encode_coding_system)) |
| 5411 | { |
| 5412 | /* The coding system for encoding was changed to raw-text |
| 5413 | because we sent a unibyte text previously. Now we are |
| 5414 | sending a multibyte text, thus we must encode it by the |
| 5415 | original coding system specified for the current process. |
| 5416 | |
| 5417 | Another reason we come here is that the coding system |
| 5418 | was just complemented and a new one was returned by |
| 5419 | complement_process_encoding_system. */ |
| 5420 | setup_coding_system (p->encode_coding_system, coding); |
| 5421 | Vlast_coding_system_used = p->encode_coding_system; |
| 5422 | } |
| 5423 | coding->src_multibyte = 1; |
| 5424 | } |
| 5425 | else |
| 5426 | { |
| 5427 | coding->src_multibyte = 0; |
| 5428 | /* For sending a unibyte text, character code conversion should |
| 5429 | not take place but EOL conversion should. So, setup raw-text |
| 5430 | or one of the subsidiary if we have not yet done it. */ |
| 5431 | if (CODING_REQUIRE_ENCODING (coding)) |
| 5432 | { |
| 5433 | if (CODING_REQUIRE_FLUSHING (coding)) |
| 5434 | { |
| 5435 | /* But, before changing the coding, we must flush out data. */ |
| 5436 | coding->mode |= CODING_MODE_LAST_BLOCK; |
| 5437 | send_process (proc, "", 0, Qt); |
| 5438 | coding->mode &= CODING_MODE_LAST_BLOCK; |
| 5439 | } |
| 5440 | setup_coding_system (raw_text_coding_system |
| 5441 | (Vlast_coding_system_used), |
| 5442 | coding); |
| 5443 | coding->src_multibyte = 0; |
| 5444 | } |
| 5445 | } |
| 5446 | coding->dst_multibyte = 0; |
| 5447 | |
| 5448 | if (CODING_REQUIRE_ENCODING (coding)) |
| 5449 | { |
| 5450 | coding->dst_object = Qt; |
| 5451 | if (BUFFERP (object)) |
| 5452 | { |
| 5453 | ptrdiff_t from_byte, from, to; |
| 5454 | ptrdiff_t save_pt, save_pt_byte; |
| 5455 | struct buffer *cur = current_buffer; |
| 5456 | |
| 5457 | set_buffer_internal (XBUFFER (object)); |
| 5458 | save_pt = PT, save_pt_byte = PT_BYTE; |
| 5459 | |
| 5460 | from_byte = PTR_BYTE_POS ((unsigned char *) buf); |
| 5461 | from = BYTE_TO_CHAR (from_byte); |
| 5462 | to = BYTE_TO_CHAR (from_byte + len); |
| 5463 | TEMP_SET_PT_BOTH (from, from_byte); |
| 5464 | encode_coding_object (coding, object, from, from_byte, |
| 5465 | to, from_byte + len, Qt); |
| 5466 | TEMP_SET_PT_BOTH (save_pt, save_pt_byte); |
| 5467 | set_buffer_internal (cur); |
| 5468 | } |
| 5469 | else if (STRINGP (object)) |
| 5470 | { |
| 5471 | encode_coding_object (coding, object, 0, 0, SCHARS (object), |
| 5472 | SBYTES (object), Qt); |
| 5473 | } |
| 5474 | else |
| 5475 | { |
| 5476 | coding->dst_object = make_unibyte_string (buf, len); |
| 5477 | coding->produced = len; |
| 5478 | } |
| 5479 | |
| 5480 | len = coding->produced; |
| 5481 | object = coding->dst_object; |
| 5482 | buf = SSDATA (object); |
| 5483 | } |
| 5484 | |
| 5485 | /* If there is already data in the write_queue, put the new data |
| 5486 | in the back of queue. Otherwise, ignore it. */ |
| 5487 | if (!NILP (p->write_queue)) |
| 5488 | write_queue_push (p, object, buf, len, 0); |
| 5489 | |
| 5490 | do /* while !NILP (p->write_queue) */ |
| 5491 | { |
| 5492 | ptrdiff_t cur_len = -1; |
| 5493 | const char *cur_buf; |
| 5494 | Lisp_Object cur_object; |
| 5495 | |
| 5496 | /* If write_queue is empty, ignore it. */ |
| 5497 | if (!write_queue_pop (p, &cur_object, &cur_buf, &cur_len)) |
| 5498 | { |
| 5499 | cur_len = len; |
| 5500 | cur_buf = buf; |
| 5501 | cur_object = object; |
| 5502 | } |
| 5503 | |
| 5504 | while (cur_len > 0) |
| 5505 | { |
| 5506 | /* Send this batch, using one or more write calls. */ |
| 5507 | ptrdiff_t written = 0; |
| 5508 | int outfd = p->outfd; |
| 5509 | #ifdef DATAGRAM_SOCKETS |
| 5510 | if (DATAGRAM_CHAN_P (outfd)) |
| 5511 | { |
| 5512 | rv = sendto (outfd, cur_buf, cur_len, |
| 5513 | 0, datagram_address[outfd].sa, |
| 5514 | datagram_address[outfd].len); |
| 5515 | if (rv >= 0) |
| 5516 | written = rv; |
| 5517 | else if (errno == EMSGSIZE) |
| 5518 | report_file_error ("Sending datagram", proc); |
| 5519 | } |
| 5520 | else |
| 5521 | #endif |
| 5522 | { |
| 5523 | #ifdef HAVE_GNUTLS |
| 5524 | if (p->gnutls_p && p->gnutls_state) |
| 5525 | written = emacs_gnutls_write (p, cur_buf, cur_len); |
| 5526 | else |
| 5527 | #endif |
| 5528 | written = emacs_write_sig (outfd, cur_buf, cur_len); |
| 5529 | rv = (written ? 0 : -1); |
| 5530 | #ifdef ADAPTIVE_READ_BUFFERING |
| 5531 | if (p->read_output_delay > 0 |
| 5532 | && p->adaptive_read_buffering == 1) |
| 5533 | { |
| 5534 | p->read_output_delay = 0; |
| 5535 | process_output_delay_count--; |
| 5536 | p->read_output_skip = 0; |
| 5537 | } |
| 5538 | #endif |
| 5539 | } |
| 5540 | |
| 5541 | if (rv < 0) |
| 5542 | { |
| 5543 | if (errno == EAGAIN |
| 5544 | #ifdef EWOULDBLOCK |
| 5545 | || errno == EWOULDBLOCK |
| 5546 | #endif |
| 5547 | ) |
| 5548 | /* Buffer is full. Wait, accepting input; |
| 5549 | that may allow the program |
| 5550 | to finish doing output and read more. */ |
| 5551 | { |
| 5552 | #ifdef BROKEN_PTY_READ_AFTER_EAGAIN |
| 5553 | /* A gross hack to work around a bug in FreeBSD. |
| 5554 | In the following sequence, read(2) returns |
| 5555 | bogus data: |
| 5556 | |
| 5557 | write(2) 1022 bytes |
| 5558 | write(2) 954 bytes, get EAGAIN |
| 5559 | read(2) 1024 bytes in process_read_output |
| 5560 | read(2) 11 bytes in process_read_output |
| 5561 | |
| 5562 | That is, read(2) returns more bytes than have |
| 5563 | ever been written successfully. The 1033 bytes |
| 5564 | read are the 1022 bytes written successfully |
| 5565 | after processing (for example with CRs added if |
| 5566 | the terminal is set up that way which it is |
| 5567 | here). The same bytes will be seen again in a |
| 5568 | later read(2), without the CRs. */ |
| 5569 | |
| 5570 | if (errno == EAGAIN) |
| 5571 | { |
| 5572 | int flags = FWRITE; |
| 5573 | ioctl (p->outfd, TIOCFLUSH, &flags); |
| 5574 | } |
| 5575 | #endif /* BROKEN_PTY_READ_AFTER_EAGAIN */ |
| 5576 | |
| 5577 | /* Put what we should have written in wait_queue. */ |
| 5578 | write_queue_push (p, cur_object, cur_buf, cur_len, 1); |
| 5579 | wait_reading_process_output (0, 20 * 1000 * 1000, |
| 5580 | 0, 0, Qnil, NULL, 0); |
| 5581 | /* Reread queue, to see what is left. */ |
| 5582 | break; |
| 5583 | } |
| 5584 | else if (errno == EPIPE) |
| 5585 | { |
| 5586 | p->raw_status_new = 0; |
| 5587 | pset_status (p, list2 (Qexit, make_number (256))); |
| 5588 | p->tick = ++process_tick; |
| 5589 | deactivate_process (proc); |
| 5590 | error ("process %s no longer connected to pipe; closed it", |
| 5591 | SDATA (p->name)); |
| 5592 | } |
| 5593 | else |
| 5594 | /* This is a real error. */ |
| 5595 | report_file_error ("Writing to process", proc); |
| 5596 | } |
| 5597 | cur_buf += written; |
| 5598 | cur_len -= written; |
| 5599 | } |
| 5600 | } |
| 5601 | while (!NILP (p->write_queue)); |
| 5602 | } |
| 5603 | |
| 5604 | DEFUN ("process-send-region", Fprocess_send_region, Sprocess_send_region, |
| 5605 | 3, 3, 0, |
| 5606 | doc: /* Send current contents of region as input to PROCESS. |
| 5607 | PROCESS may be a process, a buffer, the name of a process or buffer, or |
| 5608 | nil, indicating the current buffer's process. |
| 5609 | Called from program, takes three arguments, PROCESS, START and END. |
| 5610 | If the region is more than 500 characters long, |
| 5611 | it is sent in several bunches. This may happen even for shorter regions. |
| 5612 | Output from processes can arrive in between bunches. */) |
| 5613 | (Lisp_Object process, Lisp_Object start, Lisp_Object end) |
| 5614 | { |
| 5615 | Lisp_Object proc = get_process (process); |
| 5616 | ptrdiff_t start_byte, end_byte; |
| 5617 | |
| 5618 | validate_region (&start, &end); |
| 5619 | |
| 5620 | start_byte = CHAR_TO_BYTE (XINT (start)); |
| 5621 | end_byte = CHAR_TO_BYTE (XINT (end)); |
| 5622 | |
| 5623 | if (XINT (start) < GPT && XINT (end) > GPT) |
| 5624 | move_gap_both (XINT (start), start_byte); |
| 5625 | |
| 5626 | send_process (proc, (char *) BYTE_POS_ADDR (start_byte), |
| 5627 | end_byte - start_byte, Fcurrent_buffer ()); |
| 5628 | |
| 5629 | return Qnil; |
| 5630 | } |
| 5631 | |
| 5632 | DEFUN ("process-send-string", Fprocess_send_string, Sprocess_send_string, |
| 5633 | 2, 2, 0, |
| 5634 | doc: /* Send PROCESS the contents of STRING as input. |
| 5635 | PROCESS may be a process, a buffer, the name of a process or buffer, or |
| 5636 | nil, indicating the current buffer's process. |
| 5637 | If STRING is more than 500 characters long, |
| 5638 | it is sent in several bunches. This may happen even for shorter strings. |
| 5639 | Output from processes can arrive in between bunches. */) |
| 5640 | (Lisp_Object process, Lisp_Object string) |
| 5641 | { |
| 5642 | Lisp_Object proc; |
| 5643 | CHECK_STRING (string); |
| 5644 | proc = get_process (process); |
| 5645 | send_process (proc, SSDATA (string), |
| 5646 | SBYTES (string), string); |
| 5647 | return Qnil; |
| 5648 | } |
| 5649 | \f |
| 5650 | /* Return the foreground process group for the tty/pty that |
| 5651 | the process P uses. */ |
| 5652 | static pid_t |
| 5653 | emacs_get_tty_pgrp (struct Lisp_Process *p) |
| 5654 | { |
| 5655 | pid_t gid = -1; |
| 5656 | |
| 5657 | #ifdef TIOCGPGRP |
| 5658 | if (ioctl (p->infd, TIOCGPGRP, &gid) == -1 && ! NILP (p->tty_name)) |
| 5659 | { |
| 5660 | int fd; |
| 5661 | /* Some OS:es (Solaris 8/9) does not allow TIOCGPGRP from the |
| 5662 | master side. Try the slave side. */ |
| 5663 | fd = emacs_open (SSDATA (p->tty_name), O_RDONLY, 0); |
| 5664 | |
| 5665 | if (fd != -1) |
| 5666 | { |
| 5667 | ioctl (fd, TIOCGPGRP, &gid); |
| 5668 | emacs_close (fd); |
| 5669 | } |
| 5670 | } |
| 5671 | #endif /* defined (TIOCGPGRP ) */ |
| 5672 | |
| 5673 | return gid; |
| 5674 | } |
| 5675 | |
| 5676 | DEFUN ("process-running-child-p", Fprocess_running_child_p, |
| 5677 | Sprocess_running_child_p, 0, 1, 0, |
| 5678 | doc: /* Return t if PROCESS has given the terminal to a child. |
| 5679 | If the operating system does not make it possible to find out, |
| 5680 | return t unconditionally. */) |
| 5681 | (Lisp_Object process) |
| 5682 | { |
| 5683 | /* Initialize in case ioctl doesn't exist or gives an error, |
| 5684 | in a way that will cause returning t. */ |
| 5685 | pid_t gid; |
| 5686 | Lisp_Object proc; |
| 5687 | struct Lisp_Process *p; |
| 5688 | |
| 5689 | proc = get_process (process); |
| 5690 | p = XPROCESS (proc); |
| 5691 | |
| 5692 | if (!EQ (p->type, Qreal)) |
| 5693 | error ("Process %s is not a subprocess", |
| 5694 | SDATA (p->name)); |
| 5695 | if (p->infd < 0) |
| 5696 | error ("Process %s is not active", |
| 5697 | SDATA (p->name)); |
| 5698 | |
| 5699 | gid = emacs_get_tty_pgrp (p); |
| 5700 | |
| 5701 | if (gid == p->pid) |
| 5702 | return Qnil; |
| 5703 | return Qt; |
| 5704 | } |
| 5705 | \f |
| 5706 | /* send a signal number SIGNO to PROCESS. |
| 5707 | If CURRENT_GROUP is t, that means send to the process group |
| 5708 | that currently owns the terminal being used to communicate with PROCESS. |
| 5709 | This is used for various commands in shell mode. |
| 5710 | If CURRENT_GROUP is lambda, that means send to the process group |
| 5711 | that currently owns the terminal, but only if it is NOT the shell itself. |
| 5712 | |
| 5713 | If NOMSG is false, insert signal-announcements into process's buffers |
| 5714 | right away. |
| 5715 | |
| 5716 | If we can, we try to signal PROCESS by sending control characters |
| 5717 | down the pty. This allows us to signal inferiors who have changed |
| 5718 | their uid, for which kill would return an EPERM error. */ |
| 5719 | |
| 5720 | static void |
| 5721 | process_send_signal (Lisp_Object process, int signo, Lisp_Object current_group, |
| 5722 | bool nomsg) |
| 5723 | { |
| 5724 | Lisp_Object proc; |
| 5725 | struct Lisp_Process *p; |
| 5726 | pid_t gid; |
| 5727 | bool no_pgrp = 0; |
| 5728 | |
| 5729 | proc = get_process (process); |
| 5730 | p = XPROCESS (proc); |
| 5731 | |
| 5732 | if (!EQ (p->type, Qreal)) |
| 5733 | error ("Process %s is not a subprocess", |
| 5734 | SDATA (p->name)); |
| 5735 | if (p->infd < 0) |
| 5736 | error ("Process %s is not active", |
| 5737 | SDATA (p->name)); |
| 5738 | |
| 5739 | if (!p->pty_flag) |
| 5740 | current_group = Qnil; |
| 5741 | |
| 5742 | /* If we are using pgrps, get a pgrp number and make it negative. */ |
| 5743 | if (NILP (current_group)) |
| 5744 | /* Send the signal to the shell's process group. */ |
| 5745 | gid = p->pid; |
| 5746 | else |
| 5747 | { |
| 5748 | #ifdef SIGNALS_VIA_CHARACTERS |
| 5749 | /* If possible, send signals to the entire pgrp |
| 5750 | by sending an input character to it. */ |
| 5751 | |
| 5752 | struct termios t; |
| 5753 | cc_t *sig_char = NULL; |
| 5754 | |
| 5755 | tcgetattr (p->infd, &t); |
| 5756 | |
| 5757 | switch (signo) |
| 5758 | { |
| 5759 | case SIGINT: |
| 5760 | sig_char = &t.c_cc[VINTR]; |
| 5761 | break; |
| 5762 | |
| 5763 | case SIGQUIT: |
| 5764 | sig_char = &t.c_cc[VQUIT]; |
| 5765 | break; |
| 5766 | |
| 5767 | case SIGTSTP: |
| 5768 | #if defined (VSWTCH) && !defined (PREFER_VSUSP) |
| 5769 | sig_char = &t.c_cc[VSWTCH]; |
| 5770 | #else |
| 5771 | sig_char = &t.c_cc[VSUSP]; |
| 5772 | #endif |
| 5773 | break; |
| 5774 | } |
| 5775 | |
| 5776 | if (sig_char && *sig_char != CDISABLE) |
| 5777 | { |
| 5778 | send_process (proc, (char *) sig_char, 1, Qnil); |
| 5779 | return; |
| 5780 | } |
| 5781 | /* If we can't send the signal with a character, |
| 5782 | fall through and send it another way. */ |
| 5783 | |
| 5784 | /* The code above may fall through if it can't |
| 5785 | handle the signal. */ |
| 5786 | #endif /* defined (SIGNALS_VIA_CHARACTERS) */ |
| 5787 | |
| 5788 | #ifdef TIOCGPGRP |
| 5789 | /* Get the current pgrp using the tty itself, if we have that. |
| 5790 | Otherwise, use the pty to get the pgrp. |
| 5791 | On pfa systems, saka@pfu.fujitsu.co.JP writes: |
| 5792 | "TIOCGPGRP symbol defined in sys/ioctl.h at E50. |
| 5793 | But, TIOCGPGRP does not work on E50 ;-P works fine on E60" |
| 5794 | His patch indicates that if TIOCGPGRP returns an error, then |
| 5795 | we should just assume that p->pid is also the process group id. */ |
| 5796 | |
| 5797 | gid = emacs_get_tty_pgrp (p); |
| 5798 | |
| 5799 | if (gid == -1) |
| 5800 | /* If we can't get the information, assume |
| 5801 | the shell owns the tty. */ |
| 5802 | gid = p->pid; |
| 5803 | |
| 5804 | /* It is not clear whether anything really can set GID to -1. |
| 5805 | Perhaps on some system one of those ioctls can or could do so. |
| 5806 | Or perhaps this is vestigial. */ |
| 5807 | if (gid == -1) |
| 5808 | no_pgrp = 1; |
| 5809 | #else /* ! defined (TIOCGPGRP ) */ |
| 5810 | /* Can't select pgrps on this system, so we know that |
| 5811 | the child itself heads the pgrp. */ |
| 5812 | gid = p->pid; |
| 5813 | #endif /* ! defined (TIOCGPGRP ) */ |
| 5814 | |
| 5815 | /* If current_group is lambda, and the shell owns the terminal, |
| 5816 | don't send any signal. */ |
| 5817 | if (EQ (current_group, Qlambda) && gid == p->pid) |
| 5818 | return; |
| 5819 | } |
| 5820 | |
| 5821 | #ifdef SIGCONT |
| 5822 | if (signo == SIGCONT) |
| 5823 | { |
| 5824 | p->raw_status_new = 0; |
| 5825 | pset_status (p, Qrun); |
| 5826 | p->tick = ++process_tick; |
| 5827 | if (!nomsg) |
| 5828 | { |
| 5829 | status_notify (NULL); |
| 5830 | redisplay_preserve_echo_area (13); |
| 5831 | } |
| 5832 | } |
| 5833 | #endif |
| 5834 | |
| 5835 | /* If we don't have process groups, send the signal to the immediate |
| 5836 | subprocess. That isn't really right, but it's better than any |
| 5837 | obvious alternative. */ |
| 5838 | if (no_pgrp) |
| 5839 | { |
| 5840 | kill (p->pid, signo); |
| 5841 | return; |
| 5842 | } |
| 5843 | |
| 5844 | /* gid may be a pid, or minus a pgrp's number */ |
| 5845 | #ifdef TIOCSIGSEND |
| 5846 | if (!NILP (current_group)) |
| 5847 | { |
| 5848 | if (ioctl (p->infd, TIOCSIGSEND, signo) == -1) |
| 5849 | kill (-gid, signo); |
| 5850 | } |
| 5851 | else |
| 5852 | { |
| 5853 | gid = - p->pid; |
| 5854 | kill (gid, signo); |
| 5855 | } |
| 5856 | #else /* ! defined (TIOCSIGSEND) */ |
| 5857 | kill (-gid, signo); |
| 5858 | #endif /* ! defined (TIOCSIGSEND) */ |
| 5859 | } |
| 5860 | |
| 5861 | DEFUN ("interrupt-process", Finterrupt_process, Sinterrupt_process, 0, 2, 0, |
| 5862 | doc: /* Interrupt process PROCESS. |
| 5863 | PROCESS may be a process, a buffer, or the name of a process or buffer. |
| 5864 | No arg or nil means current buffer's process. |
| 5865 | Second arg CURRENT-GROUP non-nil means send signal to |
| 5866 | the current process-group of the process's controlling terminal |
| 5867 | rather than to the process's own process group. |
| 5868 | If the process is a shell, this means interrupt current subjob |
| 5869 | rather than the shell. |
| 5870 | |
| 5871 | If CURRENT-GROUP is `lambda', and if the shell owns the terminal, |
| 5872 | don't send the signal. */) |
| 5873 | (Lisp_Object process, Lisp_Object current_group) |
| 5874 | { |
| 5875 | process_send_signal (process, SIGINT, current_group, 0); |
| 5876 | return process; |
| 5877 | } |
| 5878 | |
| 5879 | DEFUN ("kill-process", Fkill_process, Skill_process, 0, 2, 0, |
| 5880 | doc: /* Kill process PROCESS. May be process or name of one. |
| 5881 | See function `interrupt-process' for more details on usage. */) |
| 5882 | (Lisp_Object process, Lisp_Object current_group) |
| 5883 | { |
| 5884 | process_send_signal (process, SIGKILL, current_group, 0); |
| 5885 | return process; |
| 5886 | } |
| 5887 | |
| 5888 | DEFUN ("quit-process", Fquit_process, Squit_process, 0, 2, 0, |
| 5889 | doc: /* Send QUIT signal to process PROCESS. May be process or name of one. |
| 5890 | See function `interrupt-process' for more details on usage. */) |
| 5891 | (Lisp_Object process, Lisp_Object current_group) |
| 5892 | { |
| 5893 | process_send_signal (process, SIGQUIT, current_group, 0); |
| 5894 | return process; |
| 5895 | } |
| 5896 | |
| 5897 | DEFUN ("stop-process", Fstop_process, Sstop_process, 0, 2, 0, |
| 5898 | doc: /* Stop process PROCESS. May be process or name of one. |
| 5899 | See function `interrupt-process' for more details on usage. |
| 5900 | If PROCESS is a network or serial process, inhibit handling of incoming |
| 5901 | traffic. */) |
| 5902 | (Lisp_Object process, Lisp_Object current_group) |
| 5903 | { |
| 5904 | if (PROCESSP (process) && (NETCONN_P (process) || SERIALCONN_P (process))) |
| 5905 | { |
| 5906 | struct Lisp_Process *p; |
| 5907 | |
| 5908 | p = XPROCESS (process); |
| 5909 | if (NILP (p->command) |
| 5910 | && p->infd >= 0) |
| 5911 | { |
| 5912 | FD_CLR (p->infd, &input_wait_mask); |
| 5913 | FD_CLR (p->infd, &non_keyboard_wait_mask); |
| 5914 | } |
| 5915 | pset_command (p, Qt); |
| 5916 | return process; |
| 5917 | } |
| 5918 | #ifndef SIGTSTP |
| 5919 | error ("No SIGTSTP support"); |
| 5920 | #else |
| 5921 | process_send_signal (process, SIGTSTP, current_group, 0); |
| 5922 | #endif |
| 5923 | return process; |
| 5924 | } |
| 5925 | |
| 5926 | DEFUN ("continue-process", Fcontinue_process, Scontinue_process, 0, 2, 0, |
| 5927 | doc: /* Continue process PROCESS. May be process or name of one. |
| 5928 | See function `interrupt-process' for more details on usage. |
| 5929 | If PROCESS is a network or serial process, resume handling of incoming |
| 5930 | traffic. */) |
| 5931 | (Lisp_Object process, Lisp_Object current_group) |
| 5932 | { |
| 5933 | if (PROCESSP (process) && (NETCONN_P (process) || SERIALCONN_P (process))) |
| 5934 | { |
| 5935 | struct Lisp_Process *p; |
| 5936 | |
| 5937 | p = XPROCESS (process); |
| 5938 | if (EQ (p->command, Qt) |
| 5939 | && p->infd >= 0 |
| 5940 | && (!EQ (p->filter, Qt) || EQ (p->status, Qlisten))) |
| 5941 | { |
| 5942 | FD_SET (p->infd, &input_wait_mask); |
| 5943 | FD_SET (p->infd, &non_keyboard_wait_mask); |
| 5944 | #ifdef WINDOWSNT |
| 5945 | if (fd_info[ p->infd ].flags & FILE_SERIAL) |
| 5946 | PurgeComm (fd_info[ p->infd ].hnd, PURGE_RXABORT | PURGE_RXCLEAR); |
| 5947 | #else /* not WINDOWSNT */ |
| 5948 | tcflush (p->infd, TCIFLUSH); |
| 5949 | #endif /* not WINDOWSNT */ |
| 5950 | } |
| 5951 | pset_command (p, Qnil); |
| 5952 | return process; |
| 5953 | } |
| 5954 | #ifdef SIGCONT |
| 5955 | process_send_signal (process, SIGCONT, current_group, 0); |
| 5956 | #else |
| 5957 | error ("No SIGCONT support"); |
| 5958 | #endif |
| 5959 | return process; |
| 5960 | } |
| 5961 | |
| 5962 | /* Return the integer value of the signal whose abbreviation is ABBR, |
| 5963 | or a negative number if there is no such signal. */ |
| 5964 | static int |
| 5965 | abbr_to_signal (char const *name) |
| 5966 | { |
| 5967 | int i, signo; |
| 5968 | char sigbuf[20]; /* Large enough for all valid signal abbreviations. */ |
| 5969 | |
| 5970 | if (!strncmp (name, "SIG", 3) || !strncmp (name, "sig", 3)) |
| 5971 | name += 3; |
| 5972 | |
| 5973 | for (i = 0; i < sizeof sigbuf; i++) |
| 5974 | { |
| 5975 | sigbuf[i] = c_toupper (name[i]); |
| 5976 | if (! sigbuf[i]) |
| 5977 | return str2sig (sigbuf, &signo) == 0 ? signo : -1; |
| 5978 | } |
| 5979 | |
| 5980 | return -1; |
| 5981 | } |
| 5982 | |
| 5983 | DEFUN ("signal-process", Fsignal_process, Ssignal_process, |
| 5984 | 2, 2, "sProcess (name or number): \nnSignal code: ", |
| 5985 | doc: /* Send PROCESS the signal with code SIGCODE. |
| 5986 | PROCESS may also be a number specifying the process id of the |
| 5987 | process to signal; in this case, the process need not be a child of |
| 5988 | this Emacs. |
| 5989 | SIGCODE may be an integer, or a symbol whose name is a signal name. */) |
| 5990 | (Lisp_Object process, Lisp_Object sigcode) |
| 5991 | { |
| 5992 | pid_t pid; |
| 5993 | int signo; |
| 5994 | |
| 5995 | if (STRINGP (process)) |
| 5996 | { |
| 5997 | Lisp_Object tem = Fget_process (process); |
| 5998 | if (NILP (tem)) |
| 5999 | { |
| 6000 | Lisp_Object process_number = |
| 6001 | string_to_number (SSDATA (process), 10, 1); |
| 6002 | if (INTEGERP (process_number) || FLOATP (process_number)) |
| 6003 | tem = process_number; |
| 6004 | } |
| 6005 | process = tem; |
| 6006 | } |
| 6007 | else if (!NUMBERP (process)) |
| 6008 | process = get_process (process); |
| 6009 | |
| 6010 | if (NILP (process)) |
| 6011 | return process; |
| 6012 | |
| 6013 | if (NUMBERP (process)) |
| 6014 | CONS_TO_INTEGER (process, pid_t, pid); |
| 6015 | else |
| 6016 | { |
| 6017 | CHECK_PROCESS (process); |
| 6018 | pid = XPROCESS (process)->pid; |
| 6019 | if (pid <= 0) |
| 6020 | error ("Cannot signal process %s", SDATA (XPROCESS (process)->name)); |
| 6021 | } |
| 6022 | |
| 6023 | if (INTEGERP (sigcode)) |
| 6024 | { |
| 6025 | CHECK_TYPE_RANGED_INTEGER (int, sigcode); |
| 6026 | signo = XINT (sigcode); |
| 6027 | } |
| 6028 | else |
| 6029 | { |
| 6030 | char *name; |
| 6031 | |
| 6032 | CHECK_SYMBOL (sigcode); |
| 6033 | name = SSDATA (SYMBOL_NAME (sigcode)); |
| 6034 | |
| 6035 | signo = abbr_to_signal (name); |
| 6036 | if (signo < 0) |
| 6037 | error ("Undefined signal name %s", name); |
| 6038 | } |
| 6039 | |
| 6040 | return make_number (kill (pid, signo)); |
| 6041 | } |
| 6042 | |
| 6043 | DEFUN ("process-send-eof", Fprocess_send_eof, Sprocess_send_eof, 0, 1, 0, |
| 6044 | doc: /* Make PROCESS see end-of-file in its input. |
| 6045 | EOF comes after any text already sent to it. |
| 6046 | PROCESS may be a process, a buffer, the name of a process or buffer, or |
| 6047 | nil, indicating the current buffer's process. |
| 6048 | If PROCESS is a network connection, or is a process communicating |
| 6049 | through a pipe (as opposed to a pty), then you cannot send any more |
| 6050 | text to PROCESS after you call this function. |
| 6051 | If PROCESS is a serial process, wait until all output written to the |
| 6052 | process has been transmitted to the serial port. */) |
| 6053 | (Lisp_Object process) |
| 6054 | { |
| 6055 | Lisp_Object proc; |
| 6056 | struct coding_system *coding = NULL; |
| 6057 | int outfd; |
| 6058 | |
| 6059 | if (DATAGRAM_CONN_P (process)) |
| 6060 | return process; |
| 6061 | |
| 6062 | proc = get_process (process); |
| 6063 | outfd = XPROCESS (proc)->outfd; |
| 6064 | if (outfd >= 0) |
| 6065 | coding = proc_encode_coding_system[outfd]; |
| 6066 | |
| 6067 | /* Make sure the process is really alive. */ |
| 6068 | if (XPROCESS (proc)->raw_status_new) |
| 6069 | update_status (XPROCESS (proc)); |
| 6070 | if (! EQ (XPROCESS (proc)->status, Qrun)) |
| 6071 | error ("Process %s not running", SDATA (XPROCESS (proc)->name)); |
| 6072 | |
| 6073 | if (coding && CODING_REQUIRE_FLUSHING (coding)) |
| 6074 | { |
| 6075 | coding->mode |= CODING_MODE_LAST_BLOCK; |
| 6076 | send_process (proc, "", 0, Qnil); |
| 6077 | } |
| 6078 | |
| 6079 | if (XPROCESS (proc)->pty_flag) |
| 6080 | send_process (proc, "\004", 1, Qnil); |
| 6081 | else if (EQ (XPROCESS (proc)->type, Qserial)) |
| 6082 | { |
| 6083 | #ifndef WINDOWSNT |
| 6084 | if (tcdrain (XPROCESS (proc)->outfd) != 0) |
| 6085 | report_file_error ("Failed tcdrain", Qnil); |
| 6086 | #endif /* not WINDOWSNT */ |
| 6087 | /* Do nothing on Windows because writes are blocking. */ |
| 6088 | } |
| 6089 | else |
| 6090 | { |
| 6091 | struct Lisp_Process *p = XPROCESS (proc); |
| 6092 | int old_outfd = p->outfd; |
| 6093 | int new_outfd; |
| 6094 | |
| 6095 | #ifdef HAVE_SHUTDOWN |
| 6096 | /* If this is a network connection, or socketpair is used |
| 6097 | for communication with the subprocess, call shutdown to cause EOF. |
| 6098 | (In some old system, shutdown to socketpair doesn't work. |
| 6099 | Then we just can't win.) */ |
| 6100 | if (EQ (p->type, Qnetwork) |
| 6101 | || p->infd == old_outfd) |
| 6102 | shutdown (old_outfd, 1); |
| 6103 | #endif |
| 6104 | close_process_fd (&p->open_fd[WRITE_TO_SUBPROCESS]); |
| 6105 | new_outfd = emacs_open (NULL_DEVICE, O_WRONLY, 0); |
| 6106 | if (new_outfd < 0) |
| 6107 | report_file_error ("Opening null device", Qnil); |
| 6108 | p->open_fd[WRITE_TO_SUBPROCESS] = new_outfd; |
| 6109 | p->outfd = new_outfd; |
| 6110 | |
| 6111 | if (!proc_encode_coding_system[new_outfd]) |
| 6112 | proc_encode_coding_system[new_outfd] |
| 6113 | = xmalloc (sizeof (struct coding_system)); |
| 6114 | if (old_outfd >= 0) |
| 6115 | { |
| 6116 | *proc_encode_coding_system[new_outfd] |
| 6117 | = *proc_encode_coding_system[old_outfd]; |
| 6118 | memset (proc_encode_coding_system[old_outfd], 0, |
| 6119 | sizeof (struct coding_system)); |
| 6120 | } |
| 6121 | else |
| 6122 | setup_coding_system (p->encode_coding_system, |
| 6123 | proc_encode_coding_system[new_outfd]); |
| 6124 | } |
| 6125 | return process; |
| 6126 | } |
| 6127 | \f |
| 6128 | /* The main Emacs thread records child processes in three places: |
| 6129 | |
| 6130 | - Vprocess_alist, for asynchronous subprocesses, which are child |
| 6131 | processes visible to Lisp. |
| 6132 | |
| 6133 | - deleted_pid_list, for child processes invisible to Lisp, |
| 6134 | typically because of delete-process. These are recorded so that |
| 6135 | the processes can be reaped when they exit, so that the operating |
| 6136 | system's process table is not cluttered by zombies. |
| 6137 | |
| 6138 | - the local variable PID in Fcall_process, call_process_cleanup and |
| 6139 | call_process_kill, for synchronous subprocesses. |
| 6140 | record_unwind_protect is used to make sure this process is not |
| 6141 | forgotten: if the user interrupts call-process and the child |
| 6142 | process refuses to exit immediately even with two C-g's, |
| 6143 | call_process_kill adds PID's contents to deleted_pid_list before |
| 6144 | returning. |
| 6145 | |
| 6146 | The main Emacs thread invokes waitpid only on child processes that |
| 6147 | it creates and that have not been reaped. This avoid races on |
| 6148 | platforms such as GTK, where other threads create their own |
| 6149 | subprocesses which the main thread should not reap. For example, |
| 6150 | if the main thread attempted to reap an already-reaped child, it |
| 6151 | might inadvertently reap a GTK-created process that happened to |
| 6152 | have the same process ID. */ |
| 6153 | |
| 6154 | /* LIB_CHILD_HANDLER is a SIGCHLD handler that Emacs calls while doing |
| 6155 | its own SIGCHLD handling. On POSIXish systems, glib needs this to |
| 6156 | keep track of its own children. GNUstep is similar. */ |
| 6157 | |
| 6158 | static void dummy_handler (int sig) {} |
| 6159 | static signal_handler_t volatile lib_child_handler; |
| 6160 | |
| 6161 | /* Handle a SIGCHLD signal by looking for known child processes of |
| 6162 | Emacs whose status have changed. For each one found, record its |
| 6163 | new status. |
| 6164 | |
| 6165 | All we do is change the status; we do not run sentinels or print |
| 6166 | notifications. That is saved for the next time keyboard input is |
| 6167 | done, in order to avoid timing errors. |
| 6168 | |
| 6169 | ** WARNING: this can be called during garbage collection. |
| 6170 | Therefore, it must not be fooled by the presence of mark bits in |
| 6171 | Lisp objects. |
| 6172 | |
| 6173 | ** USG WARNING: Although it is not obvious from the documentation |
| 6174 | in signal(2), on a USG system the SIGCLD handler MUST NOT call |
| 6175 | signal() before executing at least one wait(), otherwise the |
| 6176 | handler will be called again, resulting in an infinite loop. The |
| 6177 | relevant portion of the documentation reads "SIGCLD signals will be |
| 6178 | queued and the signal-catching function will be continually |
| 6179 | reentered until the queue is empty". Invoking signal() causes the |
| 6180 | kernel to reexamine the SIGCLD queue. Fred Fish, UniSoft Systems |
| 6181 | Inc. |
| 6182 | |
| 6183 | ** Malloc WARNING: This should never call malloc either directly or |
| 6184 | indirectly; if it does, that is a bug */ |
| 6185 | |
| 6186 | static void |
| 6187 | handle_child_signal (int sig) |
| 6188 | { |
| 6189 | Lisp_Object tail, proc; |
| 6190 | |
| 6191 | /* Find the process that signaled us, and record its status. */ |
| 6192 | |
| 6193 | /* The process can have been deleted by Fdelete_process, or have |
| 6194 | been started asynchronously by Fcall_process. */ |
| 6195 | for (tail = deleted_pid_list; CONSP (tail); tail = XCDR (tail)) |
| 6196 | { |
| 6197 | bool all_pids_are_fixnums |
| 6198 | = (MOST_NEGATIVE_FIXNUM <= TYPE_MINIMUM (pid_t) |
| 6199 | && TYPE_MAXIMUM (pid_t) <= MOST_POSITIVE_FIXNUM); |
| 6200 | Lisp_Object head = XCAR (tail); |
| 6201 | Lisp_Object xpid; |
| 6202 | if (! CONSP (head)) |
| 6203 | continue; |
| 6204 | xpid = XCAR (head); |
| 6205 | if (all_pids_are_fixnums ? INTEGERP (xpid) : NUMBERP (xpid)) |
| 6206 | { |
| 6207 | pid_t deleted_pid; |
| 6208 | if (INTEGERP (xpid)) |
| 6209 | deleted_pid = XINT (xpid); |
| 6210 | else |
| 6211 | deleted_pid = XFLOAT_DATA (xpid); |
| 6212 | if (child_status_changed (deleted_pid, 0, 0)) |
| 6213 | { |
| 6214 | if (STRINGP (XCDR (head))) |
| 6215 | unlink (SSDATA (XCDR (head))); |
| 6216 | XSETCAR (tail, Qnil); |
| 6217 | } |
| 6218 | } |
| 6219 | } |
| 6220 | |
| 6221 | /* Otherwise, if it is asynchronous, it is in Vprocess_alist. */ |
| 6222 | FOR_EACH_PROCESS (tail, proc) |
| 6223 | { |
| 6224 | struct Lisp_Process *p = XPROCESS (proc); |
| 6225 | int status; |
| 6226 | |
| 6227 | if (p->alive |
| 6228 | && child_status_changed (p->pid, &status, WUNTRACED | WCONTINUED)) |
| 6229 | { |
| 6230 | /* Change the status of the process that was found. */ |
| 6231 | p->tick = ++process_tick; |
| 6232 | p->raw_status = status; |
| 6233 | p->raw_status_new = 1; |
| 6234 | |
| 6235 | /* If process has terminated, stop waiting for its output. */ |
| 6236 | if (WIFSIGNALED (status) || WIFEXITED (status)) |
| 6237 | { |
| 6238 | bool clear_desc_flag = 0; |
| 6239 | p->alive = 0; |
| 6240 | if (p->infd >= 0) |
| 6241 | clear_desc_flag = 1; |
| 6242 | |
| 6243 | /* clear_desc_flag avoids a compiler bug in Microsoft C. */ |
| 6244 | if (clear_desc_flag) |
| 6245 | { |
| 6246 | FD_CLR (p->infd, &input_wait_mask); |
| 6247 | FD_CLR (p->infd, &non_keyboard_wait_mask); |
| 6248 | } |
| 6249 | } |
| 6250 | } |
| 6251 | } |
| 6252 | |
| 6253 | lib_child_handler (sig); |
| 6254 | #ifdef NS_IMPL_GNUSTEP |
| 6255 | /* NSTask in GNUstep sets its child handler each time it is called. |
| 6256 | So we must re-set ours. */ |
| 6257 | catch_child_signal(); |
| 6258 | #endif |
| 6259 | } |
| 6260 | |
| 6261 | static void |
| 6262 | deliver_child_signal (int sig) |
| 6263 | { |
| 6264 | deliver_process_signal (sig, handle_child_signal); |
| 6265 | } |
| 6266 | \f |
| 6267 | |
| 6268 | static Lisp_Object |
| 6269 | exec_sentinel_error_handler (Lisp_Object error_val) |
| 6270 | { |
| 6271 | cmd_error_internal (error_val, "error in process sentinel: "); |
| 6272 | Vinhibit_quit = Qt; |
| 6273 | update_echo_area (); |
| 6274 | Fsleep_for (make_number (2), Qnil); |
| 6275 | return Qt; |
| 6276 | } |
| 6277 | |
| 6278 | static void |
| 6279 | exec_sentinel (Lisp_Object proc, Lisp_Object reason) |
| 6280 | { |
| 6281 | Lisp_Object sentinel, odeactivate; |
| 6282 | struct Lisp_Process *p = XPROCESS (proc); |
| 6283 | ptrdiff_t count = SPECPDL_INDEX (); |
| 6284 | bool outer_running_asynch_code = running_asynch_code; |
| 6285 | int waiting = waiting_for_user_input_p; |
| 6286 | |
| 6287 | if (inhibit_sentinels) |
| 6288 | return; |
| 6289 | |
| 6290 | /* No need to gcpro these, because all we do with them later |
| 6291 | is test them for EQness, and none of them should be a string. */ |
| 6292 | odeactivate = Vdeactivate_mark; |
| 6293 | #if 0 |
| 6294 | Lisp_Object obuffer, okeymap; |
| 6295 | XSETBUFFER (obuffer, current_buffer); |
| 6296 | okeymap = BVAR (current_buffer, keymap); |
| 6297 | #endif |
| 6298 | |
| 6299 | /* There's no good reason to let sentinels change the current |
| 6300 | buffer, and many callers of accept-process-output, sit-for, and |
| 6301 | friends don't expect current-buffer to be changed from under them. */ |
| 6302 | record_unwind_current_buffer (); |
| 6303 | |
| 6304 | sentinel = p->sentinel; |
| 6305 | |
| 6306 | /* Inhibit quit so that random quits don't screw up a running filter. */ |
| 6307 | specbind (Qinhibit_quit, Qt); |
| 6308 | specbind (Qlast_nonmenu_event, Qt); /* Why? --Stef */ |
| 6309 | |
| 6310 | /* In case we get recursively called, |
| 6311 | and we already saved the match data nonrecursively, |
| 6312 | save the same match data in safely recursive fashion. */ |
| 6313 | if (outer_running_asynch_code) |
| 6314 | { |
| 6315 | Lisp_Object tem; |
| 6316 | tem = Fmatch_data (Qnil, Qnil, Qnil); |
| 6317 | restore_search_regs (); |
| 6318 | record_unwind_save_match_data (); |
| 6319 | Fset_match_data (tem, Qt); |
| 6320 | } |
| 6321 | |
| 6322 | /* For speed, if a search happens within this code, |
| 6323 | save the match data in a special nonrecursive fashion. */ |
| 6324 | running_asynch_code = 1; |
| 6325 | |
| 6326 | internal_condition_case_1 (read_process_output_call, |
| 6327 | list3 (sentinel, proc, reason), |
| 6328 | !NILP (Vdebug_on_error) ? Qnil : Qerror, |
| 6329 | exec_sentinel_error_handler); |
| 6330 | |
| 6331 | /* If we saved the match data nonrecursively, restore it now. */ |
| 6332 | restore_search_regs (); |
| 6333 | running_asynch_code = outer_running_asynch_code; |
| 6334 | |
| 6335 | Vdeactivate_mark = odeactivate; |
| 6336 | |
| 6337 | /* Restore waiting_for_user_input_p as it was |
| 6338 | when we were called, in case the filter clobbered it. */ |
| 6339 | waiting_for_user_input_p = waiting; |
| 6340 | |
| 6341 | #if 0 |
| 6342 | if (! EQ (Fcurrent_buffer (), obuffer) |
| 6343 | || ! EQ (current_buffer->keymap, okeymap)) |
| 6344 | #endif |
| 6345 | /* But do it only if the caller is actually going to read events. |
| 6346 | Otherwise there's no need to make him wake up, and it could |
| 6347 | cause trouble (for example it would make sit_for return). */ |
| 6348 | if (waiting_for_user_input_p == -1) |
| 6349 | record_asynch_buffer_change (); |
| 6350 | |
| 6351 | unbind_to (count, Qnil); |
| 6352 | } |
| 6353 | |
| 6354 | /* Report all recent events of a change in process status |
| 6355 | (either run the sentinel or output a message). |
| 6356 | This is usually done while Emacs is waiting for keyboard input |
| 6357 | but can be done at other times. */ |
| 6358 | |
| 6359 | static void |
| 6360 | status_notify (struct Lisp_Process *deleting_process) |
| 6361 | { |
| 6362 | register Lisp_Object proc; |
| 6363 | Lisp_Object tail, msg; |
| 6364 | struct gcpro gcpro1, gcpro2; |
| 6365 | |
| 6366 | tail = Qnil; |
| 6367 | msg = Qnil; |
| 6368 | /* We need to gcpro tail; if read_process_output calls a filter |
| 6369 | which deletes a process and removes the cons to which tail points |
| 6370 | from Vprocess_alist, and then causes a GC, tail is an unprotected |
| 6371 | reference. */ |
| 6372 | GCPRO2 (tail, msg); |
| 6373 | |
| 6374 | /* Set this now, so that if new processes are created by sentinels |
| 6375 | that we run, we get called again to handle their status changes. */ |
| 6376 | update_tick = process_tick; |
| 6377 | |
| 6378 | FOR_EACH_PROCESS (tail, proc) |
| 6379 | { |
| 6380 | Lisp_Object symbol; |
| 6381 | register struct Lisp_Process *p = XPROCESS (proc); |
| 6382 | |
| 6383 | if (p->tick != p->update_tick) |
| 6384 | { |
| 6385 | p->update_tick = p->tick; |
| 6386 | |
| 6387 | /* If process is still active, read any output that remains. */ |
| 6388 | while (! EQ (p->filter, Qt) |
| 6389 | && ! EQ (p->status, Qconnect) |
| 6390 | && ! EQ (p->status, Qlisten) |
| 6391 | /* Network or serial process not stopped: */ |
| 6392 | && ! EQ (p->command, Qt) |
| 6393 | && p->infd >= 0 |
| 6394 | && p != deleting_process |
| 6395 | && read_process_output (proc, p->infd) > 0); |
| 6396 | |
| 6397 | /* Get the text to use for the message. */ |
| 6398 | if (p->raw_status_new) |
| 6399 | update_status (p); |
| 6400 | msg = status_message (p); |
| 6401 | |
| 6402 | /* If process is terminated, deactivate it or delete it. */ |
| 6403 | symbol = p->status; |
| 6404 | if (CONSP (p->status)) |
| 6405 | symbol = XCAR (p->status); |
| 6406 | |
| 6407 | if (EQ (symbol, Qsignal) || EQ (symbol, Qexit) |
| 6408 | || EQ (symbol, Qclosed)) |
| 6409 | { |
| 6410 | if (delete_exited_processes) |
| 6411 | remove_process (proc); |
| 6412 | else |
| 6413 | deactivate_process (proc); |
| 6414 | } |
| 6415 | |
| 6416 | /* The actions above may have further incremented p->tick. |
| 6417 | So set p->update_tick again so that an error in the sentinel will |
| 6418 | not cause this code to be run again. */ |
| 6419 | p->update_tick = p->tick; |
| 6420 | /* Now output the message suitably. */ |
| 6421 | exec_sentinel (proc, msg); |
| 6422 | } |
| 6423 | } /* end for */ |
| 6424 | |
| 6425 | update_mode_lines = 24; /* In case buffers use %s in mode-line-format. */ |
| 6426 | UNGCPRO; |
| 6427 | } |
| 6428 | |
| 6429 | DEFUN ("internal-default-process-sentinel", Finternal_default_process_sentinel, |
| 6430 | Sinternal_default_process_sentinel, 2, 2, 0, |
| 6431 | doc: /* Function used as default sentinel for processes. |
| 6432 | This inserts a status message into the process's buffer, if there is one. */) |
| 6433 | (Lisp_Object proc, Lisp_Object msg) |
| 6434 | { |
| 6435 | Lisp_Object buffer, symbol; |
| 6436 | struct Lisp_Process *p; |
| 6437 | CHECK_PROCESS (proc); |
| 6438 | p = XPROCESS (proc); |
| 6439 | buffer = p->buffer; |
| 6440 | symbol = p->status; |
| 6441 | if (CONSP (symbol)) |
| 6442 | symbol = XCAR (symbol); |
| 6443 | |
| 6444 | if (!EQ (symbol, Qrun) && !NILP (buffer)) |
| 6445 | { |
| 6446 | Lisp_Object tem; |
| 6447 | struct buffer *old = current_buffer; |
| 6448 | ptrdiff_t opoint, opoint_byte; |
| 6449 | ptrdiff_t before, before_byte; |
| 6450 | |
| 6451 | /* Avoid error if buffer is deleted |
| 6452 | (probably that's why the process is dead, too). */ |
| 6453 | if (!BUFFER_LIVE_P (XBUFFER (buffer))) |
| 6454 | return Qnil; |
| 6455 | Fset_buffer (buffer); |
| 6456 | |
| 6457 | if (NILP (BVAR (current_buffer, enable_multibyte_characters))) |
| 6458 | msg = (code_convert_string_norecord |
| 6459 | (msg, Vlocale_coding_system, 1)); |
| 6460 | |
| 6461 | opoint = PT; |
| 6462 | opoint_byte = PT_BYTE; |
| 6463 | /* Insert new output into buffer |
| 6464 | at the current end-of-output marker, |
| 6465 | thus preserving logical ordering of input and output. */ |
| 6466 | if (XMARKER (p->mark)->buffer) |
| 6467 | Fgoto_char (p->mark); |
| 6468 | else |
| 6469 | SET_PT_BOTH (ZV, ZV_BYTE); |
| 6470 | |
| 6471 | before = PT; |
| 6472 | before_byte = PT_BYTE; |
| 6473 | |
| 6474 | tem = BVAR (current_buffer, read_only); |
| 6475 | bset_read_only (current_buffer, Qnil); |
| 6476 | insert_string ("\nProcess "); |
| 6477 | { /* FIXME: temporary kludge. */ |
| 6478 | Lisp_Object tem2 = p->name; Finsert (1, &tem2); } |
| 6479 | insert_string (" "); |
| 6480 | Finsert (1, &msg); |
| 6481 | bset_read_only (current_buffer, tem); |
| 6482 | set_marker_both (p->mark, p->buffer, PT, PT_BYTE); |
| 6483 | |
| 6484 | if (opoint >= before) |
| 6485 | SET_PT_BOTH (opoint + (PT - before), |
| 6486 | opoint_byte + (PT_BYTE - before_byte)); |
| 6487 | else |
| 6488 | SET_PT_BOTH (opoint, opoint_byte); |
| 6489 | |
| 6490 | set_buffer_internal (old); |
| 6491 | } |
| 6492 | return Qnil; |
| 6493 | } |
| 6494 | |
| 6495 | \f |
| 6496 | DEFUN ("set-process-coding-system", Fset_process_coding_system, |
| 6497 | Sset_process_coding_system, 1, 3, 0, |
| 6498 | doc: /* Set coding systems of PROCESS to DECODING and ENCODING. |
| 6499 | DECODING will be used to decode subprocess output and ENCODING to |
| 6500 | encode subprocess input. */) |
| 6501 | (register Lisp_Object process, Lisp_Object decoding, Lisp_Object encoding) |
| 6502 | { |
| 6503 | register struct Lisp_Process *p; |
| 6504 | |
| 6505 | CHECK_PROCESS (process); |
| 6506 | p = XPROCESS (process); |
| 6507 | if (p->infd < 0) |
| 6508 | error ("Input file descriptor of %s closed", SDATA (p->name)); |
| 6509 | if (p->outfd < 0) |
| 6510 | error ("Output file descriptor of %s closed", SDATA (p->name)); |
| 6511 | Fcheck_coding_system (decoding); |
| 6512 | Fcheck_coding_system (encoding); |
| 6513 | encoding = coding_inherit_eol_type (encoding, Qnil); |
| 6514 | pset_decode_coding_system (p, decoding); |
| 6515 | pset_encode_coding_system (p, encoding); |
| 6516 | setup_process_coding_systems (process); |
| 6517 | |
| 6518 | return Qnil; |
| 6519 | } |
| 6520 | |
| 6521 | DEFUN ("process-coding-system", |
| 6522 | Fprocess_coding_system, Sprocess_coding_system, 1, 1, 0, |
| 6523 | doc: /* Return a cons of coding systems for decoding and encoding of PROCESS. */) |
| 6524 | (register Lisp_Object process) |
| 6525 | { |
| 6526 | CHECK_PROCESS (process); |
| 6527 | return Fcons (XPROCESS (process)->decode_coding_system, |
| 6528 | XPROCESS (process)->encode_coding_system); |
| 6529 | } |
| 6530 | |
| 6531 | DEFUN ("set-process-filter-multibyte", Fset_process_filter_multibyte, |
| 6532 | Sset_process_filter_multibyte, 2, 2, 0, |
| 6533 | doc: /* Set multibyteness of the strings given to PROCESS's filter. |
| 6534 | If FLAG is non-nil, the filter is given multibyte strings. |
| 6535 | If FLAG is nil, the filter is given unibyte strings. In this case, |
| 6536 | all character code conversion except for end-of-line conversion is |
| 6537 | suppressed. */) |
| 6538 | (Lisp_Object process, Lisp_Object flag) |
| 6539 | { |
| 6540 | register struct Lisp_Process *p; |
| 6541 | |
| 6542 | CHECK_PROCESS (process); |
| 6543 | p = XPROCESS (process); |
| 6544 | if (NILP (flag)) |
| 6545 | pset_decode_coding_system |
| 6546 | (p, raw_text_coding_system (p->decode_coding_system)); |
| 6547 | setup_process_coding_systems (process); |
| 6548 | |
| 6549 | return Qnil; |
| 6550 | } |
| 6551 | |
| 6552 | DEFUN ("process-filter-multibyte-p", Fprocess_filter_multibyte_p, |
| 6553 | Sprocess_filter_multibyte_p, 1, 1, 0, |
| 6554 | doc: /* Return t if a multibyte string is given to PROCESS's filter.*/) |
| 6555 | (Lisp_Object process) |
| 6556 | { |
| 6557 | register struct Lisp_Process *p; |
| 6558 | struct coding_system *coding; |
| 6559 | |
| 6560 | CHECK_PROCESS (process); |
| 6561 | p = XPROCESS (process); |
| 6562 | coding = proc_decode_coding_system[p->infd]; |
| 6563 | return (CODING_FOR_UNIBYTE (coding) ? Qnil : Qt); |
| 6564 | } |
| 6565 | |
| 6566 | |
| 6567 | \f |
| 6568 | |
| 6569 | # ifdef HAVE_GPM |
| 6570 | |
| 6571 | void |
| 6572 | add_gpm_wait_descriptor (int desc) |
| 6573 | { |
| 6574 | add_keyboard_wait_descriptor (desc); |
| 6575 | } |
| 6576 | |
| 6577 | void |
| 6578 | delete_gpm_wait_descriptor (int desc) |
| 6579 | { |
| 6580 | delete_keyboard_wait_descriptor (desc); |
| 6581 | } |
| 6582 | |
| 6583 | # endif |
| 6584 | |
| 6585 | # ifdef USABLE_SIGIO |
| 6586 | |
| 6587 | /* Return true if *MASK has a bit set |
| 6588 | that corresponds to one of the keyboard input descriptors. */ |
| 6589 | |
| 6590 | static bool |
| 6591 | keyboard_bit_set (fd_set *mask) |
| 6592 | { |
| 6593 | int fd; |
| 6594 | |
| 6595 | for (fd = 0; fd <= max_input_desc; fd++) |
| 6596 | if (FD_ISSET (fd, mask) && FD_ISSET (fd, &input_wait_mask) |
| 6597 | && !FD_ISSET (fd, &non_keyboard_wait_mask)) |
| 6598 | return 1; |
| 6599 | |
| 6600 | return 0; |
| 6601 | } |
| 6602 | # endif |
| 6603 | |
| 6604 | #else /* not subprocesses */ |
| 6605 | |
| 6606 | /* Defined on msdos.c. */ |
| 6607 | extern int sys_select (int, fd_set *, fd_set *, fd_set *, |
| 6608 | struct timespec *, void *); |
| 6609 | |
| 6610 | /* Implementation of wait_reading_process_output, assuming that there |
| 6611 | are no subprocesses. Used only by the MS-DOS build. |
| 6612 | |
| 6613 | Wait for timeout to elapse and/or keyboard input to be available. |
| 6614 | |
| 6615 | TIME_LIMIT is: |
| 6616 | timeout in seconds |
| 6617 | If negative, gobble data immediately available but don't wait for any. |
| 6618 | |
| 6619 | NSECS is: |
| 6620 | an additional duration to wait, measured in nanoseconds |
| 6621 | If TIME_LIMIT is zero, then: |
| 6622 | If NSECS == 0, there is no limit. |
| 6623 | If NSECS > 0, the timeout consists of NSECS only. |
| 6624 | If NSECS < 0, gobble data immediately, as if TIME_LIMIT were negative. |
| 6625 | |
| 6626 | READ_KBD is: |
| 6627 | 0 to ignore keyboard input, or |
| 6628 | 1 to return when input is available, or |
| 6629 | -1 means caller will actually read the input, so don't throw to |
| 6630 | the quit handler. |
| 6631 | |
| 6632 | see full version for other parameters. We know that wait_proc will |
| 6633 | always be NULL, since `subprocesses' isn't defined. |
| 6634 | |
| 6635 | DO_DISPLAY means redisplay should be done to show subprocess |
| 6636 | output that arrives. |
| 6637 | |
| 6638 | Return true if we received input from any process. */ |
| 6639 | |
| 6640 | bool |
| 6641 | wait_reading_process_output (intmax_t time_limit, int nsecs, int read_kbd, |
| 6642 | bool do_display, |
| 6643 | Lisp_Object wait_for_cell, |
| 6644 | struct Lisp_Process *wait_proc, int just_wait_proc) |
| 6645 | { |
| 6646 | register int nfds; |
| 6647 | struct timespec end_time, timeout; |
| 6648 | |
| 6649 | if (time_limit < 0) |
| 6650 | { |
| 6651 | time_limit = 0; |
| 6652 | nsecs = -1; |
| 6653 | } |
| 6654 | else if (TYPE_MAXIMUM (time_t) < time_limit) |
| 6655 | time_limit = TYPE_MAXIMUM (time_t); |
| 6656 | |
| 6657 | /* What does time_limit really mean? */ |
| 6658 | if (time_limit || nsecs > 0) |
| 6659 | { |
| 6660 | timeout = make_timespec (time_limit, nsecs); |
| 6661 | end_time = timespec_add (current_timespec (), timeout); |
| 6662 | } |
| 6663 | |
| 6664 | /* Turn off periodic alarms (in case they are in use) |
| 6665 | and then turn off any other atimers, |
| 6666 | because the select emulator uses alarms. */ |
| 6667 | stop_polling (); |
| 6668 | turn_on_atimers (0); |
| 6669 | |
| 6670 | while (1) |
| 6671 | { |
| 6672 | bool timeout_reduced_for_timers = 0; |
| 6673 | fd_set waitchannels; |
| 6674 | int xerrno; |
| 6675 | |
| 6676 | /* If calling from keyboard input, do not quit |
| 6677 | since we want to return C-g as an input character. |
| 6678 | Otherwise, do pending quit if requested. */ |
| 6679 | if (read_kbd >= 0) |
| 6680 | QUIT; |
| 6681 | |
| 6682 | /* Exit now if the cell we're waiting for became non-nil. */ |
| 6683 | if (! NILP (wait_for_cell) && ! NILP (XCAR (wait_for_cell))) |
| 6684 | break; |
| 6685 | |
| 6686 | /* Compute time from now till when time limit is up. */ |
| 6687 | /* Exit if already run out. */ |
| 6688 | if (nsecs < 0) |
| 6689 | { |
| 6690 | /* A negative timeout means |
| 6691 | gobble output available now |
| 6692 | but don't wait at all. */ |
| 6693 | |
| 6694 | timeout = make_timespec (0, 0); |
| 6695 | } |
| 6696 | else if (time_limit || nsecs > 0) |
| 6697 | { |
| 6698 | struct timespec now = current_timespec (); |
| 6699 | if (timespec_cmp (end_time, now) <= 0) |
| 6700 | break; |
| 6701 | timeout = timespec_sub (end_time, now); |
| 6702 | } |
| 6703 | else |
| 6704 | { |
| 6705 | timeout = make_timespec (100000, 0); |
| 6706 | } |
| 6707 | |
| 6708 | /* If our caller will not immediately handle keyboard events, |
| 6709 | run timer events directly. |
| 6710 | (Callers that will immediately read keyboard events |
| 6711 | call timer_delay on their own.) */ |
| 6712 | if (NILP (wait_for_cell)) |
| 6713 | { |
| 6714 | struct timespec timer_delay; |
| 6715 | |
| 6716 | do |
| 6717 | { |
| 6718 | unsigned old_timers_run = timers_run; |
| 6719 | timer_delay = timer_check (); |
| 6720 | if (timers_run != old_timers_run && do_display) |
| 6721 | /* We must retry, since a timer may have requeued itself |
| 6722 | and that could alter the time delay. */ |
| 6723 | redisplay_preserve_echo_area (14); |
| 6724 | else |
| 6725 | break; |
| 6726 | } |
| 6727 | while (!detect_input_pending ()); |
| 6728 | |
| 6729 | /* If there is unread keyboard input, also return. */ |
| 6730 | if (read_kbd != 0 |
| 6731 | && requeued_events_pending_p ()) |
| 6732 | break; |
| 6733 | |
| 6734 | if (timespec_valid_p (timer_delay) && nsecs >= 0) |
| 6735 | { |
| 6736 | if (timespec_cmp (timer_delay, timeout) < 0) |
| 6737 | { |
| 6738 | timeout = timer_delay; |
| 6739 | timeout_reduced_for_timers = 1; |
| 6740 | } |
| 6741 | } |
| 6742 | } |
| 6743 | |
| 6744 | /* Cause C-g and alarm signals to take immediate action, |
| 6745 | and cause input available signals to zero out timeout. */ |
| 6746 | if (read_kbd < 0) |
| 6747 | set_waiting_for_input (&timeout); |
| 6748 | |
| 6749 | /* If a frame has been newly mapped and needs updating, |
| 6750 | reprocess its display stuff. */ |
| 6751 | if (frame_garbaged && do_display) |
| 6752 | { |
| 6753 | clear_waiting_for_input (); |
| 6754 | redisplay_preserve_echo_area (15); |
| 6755 | if (read_kbd < 0) |
| 6756 | set_waiting_for_input (&timeout); |
| 6757 | } |
| 6758 | |
| 6759 | /* Wait till there is something to do. */ |
| 6760 | FD_ZERO (&waitchannels); |
| 6761 | if (read_kbd && detect_input_pending ()) |
| 6762 | nfds = 0; |
| 6763 | else |
| 6764 | { |
| 6765 | if (read_kbd || !NILP (wait_for_cell)) |
| 6766 | FD_SET (0, &waitchannels); |
| 6767 | nfds = pselect (1, &waitchannels, NULL, NULL, &timeout, NULL); |
| 6768 | } |
| 6769 | |
| 6770 | xerrno = errno; |
| 6771 | |
| 6772 | /* Make C-g and alarm signals set flags again */ |
| 6773 | clear_waiting_for_input (); |
| 6774 | |
| 6775 | /* If we woke up due to SIGWINCH, actually change size now. */ |
| 6776 | do_pending_window_change (0); |
| 6777 | |
| 6778 | if ((time_limit || nsecs) && nfds == 0 && ! timeout_reduced_for_timers) |
| 6779 | /* We waited the full specified time, so return now. */ |
| 6780 | break; |
| 6781 | |
| 6782 | if (nfds == -1) |
| 6783 | { |
| 6784 | /* If the system call was interrupted, then go around the |
| 6785 | loop again. */ |
| 6786 | if (xerrno == EINTR) |
| 6787 | FD_ZERO (&waitchannels); |
| 6788 | else |
| 6789 | report_file_errno ("Failed select", Qnil, xerrno); |
| 6790 | } |
| 6791 | |
| 6792 | /* Check for keyboard input */ |
| 6793 | |
| 6794 | if (read_kbd |
| 6795 | && detect_input_pending_run_timers (do_display)) |
| 6796 | { |
| 6797 | swallow_events (do_display); |
| 6798 | if (detect_input_pending_run_timers (do_display)) |
| 6799 | break; |
| 6800 | } |
| 6801 | |
| 6802 | /* If there is unread keyboard input, also return. */ |
| 6803 | if (read_kbd |
| 6804 | && requeued_events_pending_p ()) |
| 6805 | break; |
| 6806 | |
| 6807 | /* If wait_for_cell. check for keyboard input |
| 6808 | but don't run any timers. |
| 6809 | ??? (It seems wrong to me to check for keyboard |
| 6810 | input at all when wait_for_cell, but the code |
| 6811 | has been this way since July 1994. |
| 6812 | Try changing this after version 19.31.) */ |
| 6813 | if (! NILP (wait_for_cell) |
| 6814 | && detect_input_pending ()) |
| 6815 | { |
| 6816 | swallow_events (do_display); |
| 6817 | if (detect_input_pending ()) |
| 6818 | break; |
| 6819 | } |
| 6820 | |
| 6821 | /* Exit now if the cell we're waiting for became non-nil. */ |
| 6822 | if (! NILP (wait_for_cell) && ! NILP (XCAR (wait_for_cell))) |
| 6823 | break; |
| 6824 | } |
| 6825 | |
| 6826 | start_polling (); |
| 6827 | |
| 6828 | return 0; |
| 6829 | } |
| 6830 | |
| 6831 | #endif /* not subprocesses */ |
| 6832 | |
| 6833 | /* The following functions are needed even if async subprocesses are |
| 6834 | not supported. Some of them are no-op stubs in that case. */ |
| 6835 | |
| 6836 | /* Add DESC to the set of keyboard input descriptors. */ |
| 6837 | |
| 6838 | void |
| 6839 | add_keyboard_wait_descriptor (int desc) |
| 6840 | { |
| 6841 | #ifdef subprocesses /* actually means "not MSDOS" */ |
| 6842 | FD_SET (desc, &input_wait_mask); |
| 6843 | FD_SET (desc, &non_process_wait_mask); |
| 6844 | if (desc > max_input_desc) |
| 6845 | max_input_desc = desc; |
| 6846 | #endif |
| 6847 | } |
| 6848 | |
| 6849 | /* From now on, do not expect DESC to give keyboard input. */ |
| 6850 | |
| 6851 | void |
| 6852 | delete_keyboard_wait_descriptor (int desc) |
| 6853 | { |
| 6854 | #ifdef subprocesses |
| 6855 | FD_CLR (desc, &input_wait_mask); |
| 6856 | FD_CLR (desc, &non_process_wait_mask); |
| 6857 | delete_input_desc (desc); |
| 6858 | #endif |
| 6859 | } |
| 6860 | |
| 6861 | /* Setup coding systems of PROCESS. */ |
| 6862 | |
| 6863 | void |
| 6864 | setup_process_coding_systems (Lisp_Object process) |
| 6865 | { |
| 6866 | #ifdef subprocesses |
| 6867 | struct Lisp_Process *p = XPROCESS (process); |
| 6868 | int inch = p->infd; |
| 6869 | int outch = p->outfd; |
| 6870 | Lisp_Object coding_system; |
| 6871 | |
| 6872 | if (inch < 0 || outch < 0) |
| 6873 | return; |
| 6874 | |
| 6875 | if (!proc_decode_coding_system[inch]) |
| 6876 | proc_decode_coding_system[inch] = xmalloc (sizeof (struct coding_system)); |
| 6877 | coding_system = p->decode_coding_system; |
| 6878 | if (EQ (p->filter, Qinternal_default_process_filter) |
| 6879 | && BUFFERP (p->buffer)) |
| 6880 | { |
| 6881 | if (NILP (BVAR (XBUFFER (p->buffer), enable_multibyte_characters))) |
| 6882 | coding_system = raw_text_coding_system (coding_system); |
| 6883 | } |
| 6884 | setup_coding_system (coding_system, proc_decode_coding_system[inch]); |
| 6885 | |
| 6886 | if (!proc_encode_coding_system[outch]) |
| 6887 | proc_encode_coding_system[outch] = xmalloc (sizeof (struct coding_system)); |
| 6888 | setup_coding_system (p->encode_coding_system, |
| 6889 | proc_encode_coding_system[outch]); |
| 6890 | #endif |
| 6891 | } |
| 6892 | |
| 6893 | DEFUN ("get-buffer-process", Fget_buffer_process, Sget_buffer_process, 1, 1, 0, |
| 6894 | doc: /* Return the (or a) process associated with BUFFER. |
| 6895 | BUFFER may be a buffer or the name of one. */) |
| 6896 | (register Lisp_Object buffer) |
| 6897 | { |
| 6898 | #ifdef subprocesses |
| 6899 | register Lisp_Object buf, tail, proc; |
| 6900 | |
| 6901 | if (NILP (buffer)) return Qnil; |
| 6902 | buf = Fget_buffer (buffer); |
| 6903 | if (NILP (buf)) return Qnil; |
| 6904 | |
| 6905 | FOR_EACH_PROCESS (tail, proc) |
| 6906 | if (EQ (XPROCESS (proc)->buffer, buf)) |
| 6907 | return proc; |
| 6908 | #endif /* subprocesses */ |
| 6909 | return Qnil; |
| 6910 | } |
| 6911 | |
| 6912 | DEFUN ("process-inherit-coding-system-flag", |
| 6913 | Fprocess_inherit_coding_system_flag, Sprocess_inherit_coding_system_flag, |
| 6914 | 1, 1, 0, |
| 6915 | doc: /* Return the value of inherit-coding-system flag for PROCESS. |
| 6916 | If this flag is t, `buffer-file-coding-system' of the buffer |
| 6917 | associated with PROCESS will inherit the coding system used to decode |
| 6918 | the process output. */) |
| 6919 | (register Lisp_Object process) |
| 6920 | { |
| 6921 | #ifdef subprocesses |
| 6922 | CHECK_PROCESS (process); |
| 6923 | return XPROCESS (process)->inherit_coding_system_flag ? Qt : Qnil; |
| 6924 | #else |
| 6925 | /* Ignore the argument and return the value of |
| 6926 | inherit-process-coding-system. */ |
| 6927 | return inherit_process_coding_system ? Qt : Qnil; |
| 6928 | #endif |
| 6929 | } |
| 6930 | |
| 6931 | /* Kill all processes associated with `buffer'. |
| 6932 | If `buffer' is nil, kill all processes */ |
| 6933 | |
| 6934 | void |
| 6935 | kill_buffer_processes (Lisp_Object buffer) |
| 6936 | { |
| 6937 | #ifdef subprocesses |
| 6938 | Lisp_Object tail, proc; |
| 6939 | |
| 6940 | FOR_EACH_PROCESS (tail, proc) |
| 6941 | if (NILP (buffer) || EQ (XPROCESS (proc)->buffer, buffer)) |
| 6942 | { |
| 6943 | if (NETCONN_P (proc) || SERIALCONN_P (proc)) |
| 6944 | Fdelete_process (proc); |
| 6945 | else if (XPROCESS (proc)->infd >= 0) |
| 6946 | process_send_signal (proc, SIGHUP, Qnil, 1); |
| 6947 | } |
| 6948 | #else /* subprocesses */ |
| 6949 | /* Since we have no subprocesses, this does nothing. */ |
| 6950 | #endif /* subprocesses */ |
| 6951 | } |
| 6952 | |
| 6953 | DEFUN ("waiting-for-user-input-p", Fwaiting_for_user_input_p, |
| 6954 | Swaiting_for_user_input_p, 0, 0, 0, |
| 6955 | doc: /* Return non-nil if Emacs is waiting for input from the user. |
| 6956 | This is intended for use by asynchronous process output filters and sentinels. */) |
| 6957 | (void) |
| 6958 | { |
| 6959 | #ifdef subprocesses |
| 6960 | return (waiting_for_user_input_p ? Qt : Qnil); |
| 6961 | #else |
| 6962 | return Qnil; |
| 6963 | #endif |
| 6964 | } |
| 6965 | |
| 6966 | /* Stop reading input from keyboard sources. */ |
| 6967 | |
| 6968 | void |
| 6969 | hold_keyboard_input (void) |
| 6970 | { |
| 6971 | kbd_is_on_hold = 1; |
| 6972 | } |
| 6973 | |
| 6974 | /* Resume reading input from keyboard sources. */ |
| 6975 | |
| 6976 | void |
| 6977 | unhold_keyboard_input (void) |
| 6978 | { |
| 6979 | kbd_is_on_hold = 0; |
| 6980 | } |
| 6981 | |
| 6982 | /* Return true if keyboard input is on hold, zero otherwise. */ |
| 6983 | |
| 6984 | bool |
| 6985 | kbd_on_hold_p (void) |
| 6986 | { |
| 6987 | return kbd_is_on_hold; |
| 6988 | } |
| 6989 | |
| 6990 | \f |
| 6991 | /* Enumeration of and access to system processes a-la ps(1). */ |
| 6992 | |
| 6993 | DEFUN ("list-system-processes", Flist_system_processes, Slist_system_processes, |
| 6994 | 0, 0, 0, |
| 6995 | doc: /* Return a list of numerical process IDs of all running processes. |
| 6996 | If this functionality is unsupported, return nil. |
| 6997 | |
| 6998 | See `process-attributes' for getting attributes of a process given its ID. */) |
| 6999 | (void) |
| 7000 | { |
| 7001 | return list_system_processes (); |
| 7002 | } |
| 7003 | |
| 7004 | DEFUN ("process-attributes", Fprocess_attributes, |
| 7005 | Sprocess_attributes, 1, 1, 0, |
| 7006 | doc: /* Return attributes of the process given by its PID, a number. |
| 7007 | |
| 7008 | Value is an alist where each element is a cons cell of the form |
| 7009 | |
| 7010 | \(KEY . VALUE) |
| 7011 | |
| 7012 | If this functionality is unsupported, the value is nil. |
| 7013 | |
| 7014 | See `list-system-processes' for getting a list of all process IDs. |
| 7015 | |
| 7016 | The KEYs of the attributes that this function may return are listed |
| 7017 | below, together with the type of the associated VALUE (in parentheses). |
| 7018 | Not all platforms support all of these attributes; unsupported |
| 7019 | attributes will not appear in the returned alist. |
| 7020 | Unless explicitly indicated otherwise, numbers can have either |
| 7021 | integer or floating point values. |
| 7022 | |
| 7023 | euid -- Effective user User ID of the process (number) |
| 7024 | user -- User name corresponding to euid (string) |
| 7025 | egid -- Effective user Group ID of the process (number) |
| 7026 | group -- Group name corresponding to egid (string) |
| 7027 | comm -- Command name (executable name only) (string) |
| 7028 | state -- Process state code, such as "S", "R", or "T" (string) |
| 7029 | ppid -- Parent process ID (number) |
| 7030 | pgrp -- Process group ID (number) |
| 7031 | sess -- Session ID, i.e. process ID of session leader (number) |
| 7032 | ttname -- Controlling tty name (string) |
| 7033 | tpgid -- ID of foreground process group on the process's tty (number) |
| 7034 | minflt -- number of minor page faults (number) |
| 7035 | majflt -- number of major page faults (number) |
| 7036 | cminflt -- cumulative number of minor page faults (number) |
| 7037 | cmajflt -- cumulative number of major page faults (number) |
| 7038 | utime -- user time used by the process, in (current-time) format, |
| 7039 | which is a list of integers (HIGH LOW USEC PSEC) |
| 7040 | stime -- system time used by the process (current-time) |
| 7041 | time -- sum of utime and stime (current-time) |
| 7042 | cutime -- user time used by the process and its children (current-time) |
| 7043 | cstime -- system time used by the process and its children (current-time) |
| 7044 | ctime -- sum of cutime and cstime (current-time) |
| 7045 | pri -- priority of the process (number) |
| 7046 | nice -- nice value of the process (number) |
| 7047 | thcount -- process thread count (number) |
| 7048 | start -- time the process started (current-time) |
| 7049 | vsize -- virtual memory size of the process in KB's (number) |
| 7050 | rss -- resident set size of the process in KB's (number) |
| 7051 | etime -- elapsed time the process is running, in (HIGH LOW USEC PSEC) format |
| 7052 | pcpu -- percents of CPU time used by the process (floating-point number) |
| 7053 | pmem -- percents of total physical memory used by process's resident set |
| 7054 | (floating-point number) |
| 7055 | args -- command line which invoked the process (string). */) |
| 7056 | ( Lisp_Object pid) |
| 7057 | { |
| 7058 | return system_process_attributes (pid); |
| 7059 | } |
| 7060 | |
| 7061 | /* Arrange to catch SIGCHLD if this hasn't already been arranged. |
| 7062 | Invoke this after init_process_emacs, and after glib and/or GNUstep |
| 7063 | futz with the SIGCHLD handler, but before Emacs forks any children. |
| 7064 | This function's caller should block SIGCHLD. */ |
| 7065 | |
| 7066 | #ifndef NS_IMPL_GNUSTEP |
| 7067 | static |
| 7068 | #endif |
| 7069 | void |
| 7070 | catch_child_signal (void) |
| 7071 | { |
| 7072 | struct sigaction action, old_action; |
| 7073 | emacs_sigaction_init (&action, deliver_child_signal); |
| 7074 | block_child_signal (); |
| 7075 | sigaction (SIGCHLD, &action, &old_action); |
| 7076 | eassert (! (old_action.sa_flags & SA_SIGINFO)); |
| 7077 | |
| 7078 | if (old_action.sa_handler != deliver_child_signal) |
| 7079 | lib_child_handler |
| 7080 | = (old_action.sa_handler == SIG_DFL || old_action.sa_handler == SIG_IGN |
| 7081 | ? dummy_handler |
| 7082 | : old_action.sa_handler); |
| 7083 | unblock_child_signal (); |
| 7084 | } |
| 7085 | |
| 7086 | \f |
| 7087 | /* This is not called "init_process" because that is the name of a |
| 7088 | Mach system call, so it would cause problems on Darwin systems. */ |
| 7089 | void |
| 7090 | init_process_emacs (void) |
| 7091 | { |
| 7092 | #ifdef subprocesses |
| 7093 | register int i; |
| 7094 | |
| 7095 | inhibit_sentinels = 0; |
| 7096 | |
| 7097 | #ifndef CANNOT_DUMP |
| 7098 | if (! noninteractive || initialized) |
| 7099 | #endif |
| 7100 | { |
| 7101 | #if defined HAVE_GLIB && !defined WINDOWSNT |
| 7102 | /* Tickle glib's child-handling code. Ask glib to wait for Emacs itself; |
| 7103 | this should always fail, but is enough to initialize glib's |
| 7104 | private SIGCHLD handler, allowing catch_child_signal to copy |
| 7105 | it into lib_child_handler. */ |
| 7106 | g_source_unref (g_child_watch_source_new (getpid ())); |
| 7107 | #endif |
| 7108 | catch_child_signal (); |
| 7109 | } |
| 7110 | |
| 7111 | FD_ZERO (&input_wait_mask); |
| 7112 | FD_ZERO (&non_keyboard_wait_mask); |
| 7113 | FD_ZERO (&non_process_wait_mask); |
| 7114 | FD_ZERO (&write_mask); |
| 7115 | max_process_desc = max_input_desc = -1; |
| 7116 | memset (fd_callback_info, 0, sizeof (fd_callback_info)); |
| 7117 | |
| 7118 | #ifdef NON_BLOCKING_CONNECT |
| 7119 | FD_ZERO (&connect_wait_mask); |
| 7120 | num_pending_connects = 0; |
| 7121 | #endif |
| 7122 | |
| 7123 | #ifdef ADAPTIVE_READ_BUFFERING |
| 7124 | process_output_delay_count = 0; |
| 7125 | process_output_skip = 0; |
| 7126 | #endif |
| 7127 | |
| 7128 | /* Don't do this, it caused infinite select loops. The display |
| 7129 | method should call add_keyboard_wait_descriptor on stdin if it |
| 7130 | needs that. */ |
| 7131 | #if 0 |
| 7132 | FD_SET (0, &input_wait_mask); |
| 7133 | #endif |
| 7134 | |
| 7135 | Vprocess_alist = Qnil; |
| 7136 | deleted_pid_list = Qnil; |
| 7137 | for (i = 0; i < FD_SETSIZE; i++) |
| 7138 | { |
| 7139 | chan_process[i] = Qnil; |
| 7140 | proc_buffered_char[i] = -1; |
| 7141 | } |
| 7142 | memset (proc_decode_coding_system, 0, sizeof proc_decode_coding_system); |
| 7143 | memset (proc_encode_coding_system, 0, sizeof proc_encode_coding_system); |
| 7144 | #ifdef DATAGRAM_SOCKETS |
| 7145 | memset (datagram_address, 0, sizeof datagram_address); |
| 7146 | #endif |
| 7147 | |
| 7148 | { |
| 7149 | Lisp_Object subfeatures = Qnil; |
| 7150 | const struct socket_options *sopt; |
| 7151 | |
| 7152 | #define ADD_SUBFEATURE(key, val) \ |
| 7153 | subfeatures = pure_cons (pure_cons (key, pure_cons (val, Qnil)), subfeatures) |
| 7154 | |
| 7155 | #ifdef NON_BLOCKING_CONNECT |
| 7156 | ADD_SUBFEATURE (QCnowait, Qt); |
| 7157 | #endif |
| 7158 | #ifdef DATAGRAM_SOCKETS |
| 7159 | ADD_SUBFEATURE (QCtype, Qdatagram); |
| 7160 | #endif |
| 7161 | #ifdef HAVE_SEQPACKET |
| 7162 | ADD_SUBFEATURE (QCtype, Qseqpacket); |
| 7163 | #endif |
| 7164 | #ifdef HAVE_LOCAL_SOCKETS |
| 7165 | ADD_SUBFEATURE (QCfamily, Qlocal); |
| 7166 | #endif |
| 7167 | ADD_SUBFEATURE (QCfamily, Qipv4); |
| 7168 | #ifdef AF_INET6 |
| 7169 | ADD_SUBFEATURE (QCfamily, Qipv6); |
| 7170 | #endif |
| 7171 | #ifdef HAVE_GETSOCKNAME |
| 7172 | ADD_SUBFEATURE (QCservice, Qt); |
| 7173 | #endif |
| 7174 | ADD_SUBFEATURE (QCserver, Qt); |
| 7175 | |
| 7176 | for (sopt = socket_options; sopt->name; sopt++) |
| 7177 | subfeatures = pure_cons (intern_c_string (sopt->name), subfeatures); |
| 7178 | |
| 7179 | Fprovide (intern_c_string ("make-network-process"), subfeatures); |
| 7180 | } |
| 7181 | |
| 7182 | #if defined (DARWIN_OS) |
| 7183 | /* PTYs are broken on Darwin < 6, but are sometimes useful for interactive |
| 7184 | processes. As such, we only change the default value. */ |
| 7185 | if (initialized) |
| 7186 | { |
| 7187 | char const *release = (STRINGP (Voperating_system_release) |
| 7188 | ? SSDATA (Voperating_system_release) |
| 7189 | : 0); |
| 7190 | if (!release || !release[0] || (release[0] < '7' && release[1] == '.')) { |
| 7191 | Vprocess_connection_type = Qnil; |
| 7192 | } |
| 7193 | } |
| 7194 | #endif |
| 7195 | #endif /* subprocesses */ |
| 7196 | kbd_is_on_hold = 0; |
| 7197 | } |
| 7198 | |
| 7199 | void |
| 7200 | syms_of_process (void) |
| 7201 | { |
| 7202 | #ifdef subprocesses |
| 7203 | |
| 7204 | DEFSYM (Qprocessp, "processp"); |
| 7205 | DEFSYM (Qrun, "run"); |
| 7206 | DEFSYM (Qstop, "stop"); |
| 7207 | DEFSYM (Qsignal, "signal"); |
| 7208 | |
| 7209 | /* Qexit is already staticpro'd by syms_of_eval; don't staticpro it |
| 7210 | here again. |
| 7211 | |
| 7212 | Qexit = intern_c_string ("exit"); |
| 7213 | staticpro (&Qexit); */ |
| 7214 | |
| 7215 | DEFSYM (Qopen, "open"); |
| 7216 | DEFSYM (Qclosed, "closed"); |
| 7217 | DEFSYM (Qconnect, "connect"); |
| 7218 | DEFSYM (Qfailed, "failed"); |
| 7219 | DEFSYM (Qlisten, "listen"); |
| 7220 | DEFSYM (Qlocal, "local"); |
| 7221 | DEFSYM (Qipv4, "ipv4"); |
| 7222 | #ifdef AF_INET6 |
| 7223 | DEFSYM (Qipv6, "ipv6"); |
| 7224 | #endif |
| 7225 | DEFSYM (Qdatagram, "datagram"); |
| 7226 | DEFSYM (Qseqpacket, "seqpacket"); |
| 7227 | |
| 7228 | DEFSYM (QCport, ":port"); |
| 7229 | DEFSYM (QCspeed, ":speed"); |
| 7230 | DEFSYM (QCprocess, ":process"); |
| 7231 | |
| 7232 | DEFSYM (QCbytesize, ":bytesize"); |
| 7233 | DEFSYM (QCstopbits, ":stopbits"); |
| 7234 | DEFSYM (QCparity, ":parity"); |
| 7235 | DEFSYM (Qodd, "odd"); |
| 7236 | DEFSYM (Qeven, "even"); |
| 7237 | DEFSYM (QCflowcontrol, ":flowcontrol"); |
| 7238 | DEFSYM (Qhw, "hw"); |
| 7239 | DEFSYM (Qsw, "sw"); |
| 7240 | DEFSYM (QCsummary, ":summary"); |
| 7241 | |
| 7242 | DEFSYM (Qreal, "real"); |
| 7243 | DEFSYM (Qnetwork, "network"); |
| 7244 | DEFSYM (Qserial, "serial"); |
| 7245 | DEFSYM (QCbuffer, ":buffer"); |
| 7246 | DEFSYM (QChost, ":host"); |
| 7247 | DEFSYM (QCservice, ":service"); |
| 7248 | DEFSYM (QClocal, ":local"); |
| 7249 | DEFSYM (QCremote, ":remote"); |
| 7250 | DEFSYM (QCcoding, ":coding"); |
| 7251 | DEFSYM (QCserver, ":server"); |
| 7252 | DEFSYM (QCnowait, ":nowait"); |
| 7253 | DEFSYM (QCsentinel, ":sentinel"); |
| 7254 | DEFSYM (QClog, ":log"); |
| 7255 | DEFSYM (QCnoquery, ":noquery"); |
| 7256 | DEFSYM (QCstop, ":stop"); |
| 7257 | DEFSYM (QCoptions, ":options"); |
| 7258 | DEFSYM (QCplist, ":plist"); |
| 7259 | |
| 7260 | DEFSYM (Qlast_nonmenu_event, "last-nonmenu-event"); |
| 7261 | |
| 7262 | staticpro (&Vprocess_alist); |
| 7263 | staticpro (&deleted_pid_list); |
| 7264 | |
| 7265 | #endif /* subprocesses */ |
| 7266 | |
| 7267 | DEFSYM (QCname, ":name"); |
| 7268 | DEFSYM (QCtype, ":type"); |
| 7269 | |
| 7270 | DEFSYM (Qeuid, "euid"); |
| 7271 | DEFSYM (Qegid, "egid"); |
| 7272 | DEFSYM (Quser, "user"); |
| 7273 | DEFSYM (Qgroup, "group"); |
| 7274 | DEFSYM (Qcomm, "comm"); |
| 7275 | DEFSYM (Qstate, "state"); |
| 7276 | DEFSYM (Qppid, "ppid"); |
| 7277 | DEFSYM (Qpgrp, "pgrp"); |
| 7278 | DEFSYM (Qsess, "sess"); |
| 7279 | DEFSYM (Qttname, "ttname"); |
| 7280 | DEFSYM (Qtpgid, "tpgid"); |
| 7281 | DEFSYM (Qminflt, "minflt"); |
| 7282 | DEFSYM (Qmajflt, "majflt"); |
| 7283 | DEFSYM (Qcminflt, "cminflt"); |
| 7284 | DEFSYM (Qcmajflt, "cmajflt"); |
| 7285 | DEFSYM (Qutime, "utime"); |
| 7286 | DEFSYM (Qstime, "stime"); |
| 7287 | DEFSYM (Qtime, "time"); |
| 7288 | DEFSYM (Qcutime, "cutime"); |
| 7289 | DEFSYM (Qcstime, "cstime"); |
| 7290 | DEFSYM (Qctime, "ctime"); |
| 7291 | DEFSYM (Qinternal_default_process_sentinel, |
| 7292 | "internal-default-process-sentinel"); |
| 7293 | DEFSYM (Qinternal_default_process_filter, |
| 7294 | "internal-default-process-filter"); |
| 7295 | DEFSYM (Qpri, "pri"); |
| 7296 | DEFSYM (Qnice, "nice"); |
| 7297 | DEFSYM (Qthcount, "thcount"); |
| 7298 | DEFSYM (Qstart, "start"); |
| 7299 | DEFSYM (Qvsize, "vsize"); |
| 7300 | DEFSYM (Qrss, "rss"); |
| 7301 | DEFSYM (Qetime, "etime"); |
| 7302 | DEFSYM (Qpcpu, "pcpu"); |
| 7303 | DEFSYM (Qpmem, "pmem"); |
| 7304 | DEFSYM (Qargs, "args"); |
| 7305 | |
| 7306 | DEFVAR_BOOL ("delete-exited-processes", delete_exited_processes, |
| 7307 | doc: /* Non-nil means delete processes immediately when they exit. |
| 7308 | A value of nil means don't delete them until `list-processes' is run. */); |
| 7309 | |
| 7310 | delete_exited_processes = 1; |
| 7311 | |
| 7312 | #ifdef subprocesses |
| 7313 | DEFVAR_LISP ("process-connection-type", Vprocess_connection_type, |
| 7314 | doc: /* Control type of device used to communicate with subprocesses. |
| 7315 | Values are nil to use a pipe, or t or `pty' to use a pty. |
| 7316 | The value has no effect if the system has no ptys or if all ptys are busy: |
| 7317 | then a pipe is used in any case. |
| 7318 | The value takes effect when `start-process' is called. */); |
| 7319 | Vprocess_connection_type = Qt; |
| 7320 | |
| 7321 | #ifdef ADAPTIVE_READ_BUFFERING |
| 7322 | DEFVAR_LISP ("process-adaptive-read-buffering", Vprocess_adaptive_read_buffering, |
| 7323 | doc: /* If non-nil, improve receive buffering by delaying after short reads. |
| 7324 | On some systems, when Emacs reads the output from a subprocess, the output data |
| 7325 | is read in very small blocks, potentially resulting in very poor performance. |
| 7326 | This behavior can be remedied to some extent by setting this variable to a |
| 7327 | non-nil value, as it will automatically delay reading from such processes, to |
| 7328 | allow them to produce more output before Emacs tries to read it. |
| 7329 | If the value is t, the delay is reset after each write to the process; any other |
| 7330 | non-nil value means that the delay is not reset on write. |
| 7331 | The variable takes effect when `start-process' is called. */); |
| 7332 | Vprocess_adaptive_read_buffering = Qt; |
| 7333 | #endif |
| 7334 | |
| 7335 | defsubr (&Sprocessp); |
| 7336 | defsubr (&Sget_process); |
| 7337 | defsubr (&Sdelete_process); |
| 7338 | defsubr (&Sprocess_status); |
| 7339 | defsubr (&Sprocess_exit_status); |
| 7340 | defsubr (&Sprocess_id); |
| 7341 | defsubr (&Sprocess_name); |
| 7342 | defsubr (&Sprocess_tty_name); |
| 7343 | defsubr (&Sprocess_command); |
| 7344 | defsubr (&Sset_process_buffer); |
| 7345 | defsubr (&Sprocess_buffer); |
| 7346 | defsubr (&Sprocess_mark); |
| 7347 | defsubr (&Sset_process_filter); |
| 7348 | defsubr (&Sprocess_filter); |
| 7349 | defsubr (&Sset_process_sentinel); |
| 7350 | defsubr (&Sprocess_sentinel); |
| 7351 | defsubr (&Sset_process_window_size); |
| 7352 | defsubr (&Sset_process_inherit_coding_system_flag); |
| 7353 | defsubr (&Sset_process_query_on_exit_flag); |
| 7354 | defsubr (&Sprocess_query_on_exit_flag); |
| 7355 | defsubr (&Sprocess_contact); |
| 7356 | defsubr (&Sprocess_plist); |
| 7357 | defsubr (&Sset_process_plist); |
| 7358 | defsubr (&Sprocess_list); |
| 7359 | defsubr (&Sstart_process); |
| 7360 | defsubr (&Sserial_process_configure); |
| 7361 | defsubr (&Smake_serial_process); |
| 7362 | defsubr (&Sset_network_process_option); |
| 7363 | defsubr (&Smake_network_process); |
| 7364 | defsubr (&Sformat_network_address); |
| 7365 | defsubr (&Snetwork_interface_list); |
| 7366 | defsubr (&Snetwork_interface_info); |
| 7367 | #ifdef DATAGRAM_SOCKETS |
| 7368 | defsubr (&Sprocess_datagram_address); |
| 7369 | defsubr (&Sset_process_datagram_address); |
| 7370 | #endif |
| 7371 | defsubr (&Saccept_process_output); |
| 7372 | defsubr (&Sprocess_send_region); |
| 7373 | defsubr (&Sprocess_send_string); |
| 7374 | defsubr (&Sinterrupt_process); |
| 7375 | defsubr (&Skill_process); |
| 7376 | defsubr (&Squit_process); |
| 7377 | defsubr (&Sstop_process); |
| 7378 | defsubr (&Scontinue_process); |
| 7379 | defsubr (&Sprocess_running_child_p); |
| 7380 | defsubr (&Sprocess_send_eof); |
| 7381 | defsubr (&Ssignal_process); |
| 7382 | defsubr (&Swaiting_for_user_input_p); |
| 7383 | defsubr (&Sprocess_type); |
| 7384 | defsubr (&Sinternal_default_process_sentinel); |
| 7385 | defsubr (&Sinternal_default_process_filter); |
| 7386 | defsubr (&Sset_process_coding_system); |
| 7387 | defsubr (&Sprocess_coding_system); |
| 7388 | defsubr (&Sset_process_filter_multibyte); |
| 7389 | defsubr (&Sprocess_filter_multibyte_p); |
| 7390 | |
| 7391 | #endif /* subprocesses */ |
| 7392 | |
| 7393 | defsubr (&Sget_buffer_process); |
| 7394 | defsubr (&Sprocess_inherit_coding_system_flag); |
| 7395 | defsubr (&Slist_system_processes); |
| 7396 | defsubr (&Sprocess_attributes); |
| 7397 | } |