Doc fix.
[bpt/emacs.git] / ChangeLog
CommitLineData
7b93a85b
GM
12000-12-19 Gerd Moellmann <gerd@gnu.org>
2
3 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
4 source file includes XKBlib.h. On some broken Solaris systems,
5 there is an XKBlib.h, reportedly, but header files included by
6 XKBlib.h are missing.
7
02387dcc
GM
82000-12-14 Gerd Moellmann <gerd@gnu.org>
9
10 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
11
34979055
DL
122000-12-11 Dave Love <fx@gnu.org>
13
14 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
15
169fe44e
GM
162000-12-11 Paul Eggert <eggert@twinsun.com>
17
18 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
19 Merge fixes from latest GNU tar version. These macros no longer
20 futz with _XOPEN_SOURCE, as that was not portable in practice.
21 (AC_FUNC_FSEEKO): New macro.
22
23 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
24 ftello.
25
5c62b2e9
DL
262000-12-05 Dave Love <fx@gnu.org>
27
28 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
29
2dce2360
EZ
302000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
31
32 * info/dir: Change the category to "Emacs".
33
8c28d444
GM
342000-12-01 Gerd Moellmann <gerd@gnu.org>
35
36 * make-dist (tempdir): Remove epaths.h from the distribution
37 instead of paths.h.
38
68a887fa
EZ
392000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
40
41 * config.bat: Check for existence of djecho.exe, and print an
42 error message if it is not available.
43
44 * INSTALL: Describe possible problem with djecho.exe in old
45 versions of DJGPP v2.x.
46
d96a4de3
GM
472000-11-23 Gerd Moellmann <gerd@gnu.org>
48
49 * configure.in: Initialize HAVE_LIBXP to no.
50
3aeecf97
GM
512000-11-22 Gerd Moellmann <gerd@gnu.org>
52
53 * configure.in: Use m/macppc.h instead of the non-existent
54 m/powerpc.h.
55
fb279a6d
GM
562000-11-21 Gerd Moellmann <gerd@gnu.org>
57
3c64f287
GM
58 * Makefile.in (install-arch-indep): Also install info/eshell*
59 and info/speedbar*.
60
fb279a6d
GM
61 * configure.in (HAVE_PNG): Check for the presence of
62 png_get_channels to rule out older PNG libs.
63
f5f47add
GM
64 * configure.in (AC_OUTPUT): Arrange to emit definitions of
65 GCC and NON_GNU_CPP into config.status.
66
62d14e9a
DL
672000-11-20 Dave Love <fx@gnu.org>
68
1c203d4c
DL
69 * configure.in: Fix last change.
70
62d14e9a 71 * GETTING.GNU.SOFTWARE: Deleted.
169fe44e 72 * FTP: New file to replace it.
62d14e9a
DL
73 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
74
f1d6d1e8
GM
752000-11-20 Gerd Moellmann <gerd@gnu.org>
76
77 * configure.in: Use -traditional with GNU cpp.
78
b3635775
GM
792000-11-17 Gerd Moellmann <gerd@gnu.org>
80
81 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
82 Distribute more files from the nt/ subdir. Distribute PBM
83 image files from subdirs of lisp/. Distribute old change logs
84 from subdirs of lisp/. Distribute play/5x5.el.
85
0eafc06c
DL
862000-11-11 Dave Love <fx@gnu.org>
87
88 * config.sub, config.guess: Updated from master source.
89
03391420
DL
902000-11-07 Dave Love <fx@gnu.org>
91
92 * configure.in: Test for mkstemp.
93
cd66d2ed
EZ
942000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
95
96 * info/dir (Top): Rearrange menu items more logically, and put
97 them into a single category. Add menu items for RefTeX and
98 Widget.
99
1da437e9
KG
1002000-10-29 Kai Gro\e,A_\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
101
15b526b2
EZ
102 * Makefile.in (install-arch-indep): Use --info-dir instead of
103 --dir-file, and a simple argument instead of --info-file, so that
104 the Debian version of install-info also works.
1da437e9 105
99483220
EL
1062000-10-19 Eric M. Ludlam <zappo@ultranet.com>
107
108 * info/dir (Speedbar): Add entry.
109
45e680a8
EZ
1102000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
111
112 * INSTALL: Describe the new image-support options to the configure
113 script. List URLs where image support libraries can be found.
114
f2f049f3
EZ
1152000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
116
117 * info/dir (Top): Add an entry for Eshell.
118
2021ab61
DL
1192000-10-02 Dave Love <fx@gnu.org>
120
121 * configure.in: Check for gai_strerror.
122
65f75351
AS
1232000-10-01 Andreas Schwab <schwab@suse.de>
124
125 * Makefile.in (install-arch-indep): Update list of installed info
126 files.
127
71c9ec51
GM
1282000-09-30 Gerd Moellmann <gerd@gnu.org>
129
130 * configure.in: Support `sparc*-*-netbsd*'.
131
513f1fd9
EZ
1322000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
133
134 * info/dir (MIME): Add entry for emacs-mime.
135
a55b799a
DL
1362000-09-29 Dave Love <fx@gnu.org>
137
138 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
139
ce75c97a
GM
1402000-09-26 Gerd Moellmann <gerd@gnu.org>
141
142 * make-dist: Adapt to the change of leim/Makefile which was
143 necessary to ensure a reasonably working `make dist'.
144
145 * leim-Makefile.in: Moved to leim/Makefile.in..
146
147 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
148
36e44f62
KH
1492000-09-21 Kenichi Handa <handa@etl.go.jp>
150
151 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
152 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
153 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
154 files to .elc.
155 (${TIT}): Adjusted for the above change.
156 (clean mostlyclean): Likewise.
157 (.el.elc): New target.
158
da1608d9
GM
1592000-09-19 Gerd Moellmann <gerd@gnu.org>
160
161 * make-dist: Include XPM and XBM files in lisp/ and subdirs
162 in the distribution.
163
6fed3546
GM
1642000-09-18 Gerd Moellmann <gerd@gnu.org>
165
166 * make-dist (skk): Rename to `ja-dic' because the leim directory
167 was renamed.
168
b4331e96
DL
1692000-09-14 Dave Love <fx@gnu.org>
170
171 * configure.in: Fix spurion in last change.
172
ef9e4345
GM
1732000-09-14 Gerd Moellmann <gerd@gnu.org>
174
175 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
176 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
177 to `no' if defined. Change result report.
178
575daf04
DL
1792000-09-08 Dave Love <fx@gnu.org>
180
181 * configure.in: Remove spurious `@'s.
182
183 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
184 autoconf.
185
fa0b693c
GM
1862000-09-06 Gerd Moellmann <gerd@gnu.org>
187
73b77ee5
GM
188 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
189 file and print informational message.
190
fa0b693c
GM
191 * configure.in (AC_FUNC_MMAP): Add.
192
ff8df3be
GM
1932000-09-01 Gerd Moellmann <gerd@gnu.org>
194
195 * configure.in: Add ``checking'' messages for
196 XpmReturnAllocPixels.
197
bb17930d
GM
1982000-08-28 Gerd Moellmann <gerd@gnu.org>
199
200 * configure.in: Check <strings.h>; check `index' and `rindex'
201 functions.
202
6ce974d4
KH
2032000-08-26 Kenichi Handa <handa@etl.go.jp>
204
205 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
206 "case "${canonical}" in".
207
7bc3ff79
DL
2082000-08-25 Dave Love <fx@gnu.org>
209
210 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
211
457dd64a
KH
2122000-08-25 Kenichi Handa <handa@etl.go.jp>
213
7c100e1a 214 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
457dd64a 215
17494071
GM
2162000-08-24 Gerd Moellmann <gerd@gnu.org>
217
218 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
219 contains a relative path. Protect against unusable values of
220 $PWD.
221
dd0e1e54
EZ
2222000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
223
3d819a75
EZ
224 * info/dir (WoMan): Add entry.
225
dd0e1e54
EZ
226 * config.bat (maindir): Update src/_gdbinit even if it does
227 already exist.
228
70fc58b3
GM
2292000-08-07 Gerd Moellmann <gerd@gnu.org>
230
231 * Makefile.in (config.status): Prepend `$(srcdir)/' to
232 `configure'.
233
f4988be7
GM
2342000-08-03 Gerd Moellmann <gerd@gnu.org>
235
236 * configure.in: Add support for ia64*-*-linux*.
237
27848c01
GM
2382000-07-27 Gerd Moellmann <gerd@gnu.org>
239
240 * make-dist (aclocal.m4): Include in distribution.
241
b4a12321
DL
2422000-07-26 Dave Love <fx@gnu.org>
243
244 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
245
c66c29a2
DL
2462000-07-24 Dave Love <fx@gnu.org>
247
248 * configure.in: Add AC_SIZE_T.
249
3b33a005
DL
2502000-07-18 Dave Love <fx@gnu.org>
251
252 * configure.in: Reorder so that most tests are done after CPPFLAGS
253 is set from the C_SWITCH_... definitions.
254
4b92c49a
GM
2552000-07-10 Gerd Moellmann <gerd@gnu.org>
256
257 * configure.in (HAVE_XPM): Undo previous change. Check for
258 preprocessor define XpmReturnAllocPixels.
259
6c6d2e33
GM
2602000-07-06 Gerd Moellmann <gerd@gnu.org>
261
262 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
263 instead of XpmReadFileToPixmap.
264
b192d653
KR
2652000-07-05 Ken Raeburn <raeburn@gnu.org>
266
267 * configure.in: Check for <soundcard.h>. Look for ossaudio
268 library, and set LIBSOUND accordingly.
269
65171e3a
DL
2702000-07-05 Dave Love <fx@gnu.org>
271
272 * configure.in: Use AC_HEADER_SYS_WAIT.
273
969f7e79
GM
2742000-07-05 Gerd Moellmann <gerd@gnu.org>
275
276 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
277 lisp/Makefile. Distribute lisp/Makefile.in instead of
278 lisp/Makefile.
279
5a9bf171
KR
2802000-06-30 Ken Raeburn <raeburn@gnu.org>
281
282 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
283 while searching for image-handling libraries.
284
1d36487c
GM
2852000-06-26 Gerd Moellmann <gerd@gnu.org>
286
287 * configure.in (--with-xim): New option.
288
6a465756
DL
2892000-06-23 Dave Love <fx@gnu.org>
290
291 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
292 for struct timezone and test how we can call gettimeofday.
48d4b120 293 Check for OSF 5+. Check for term.h.
6a465756
DL
294
295 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
296 version.
297
16cf31f7
GM
2982000-06-23 Gerd Moellmann <gerd@gnu.org>
299
300 * configure.in (HAVE_LIBXP): Change test for libXp.
301
4c343001
DL
3022000-06-21 Dave Love <fx@gnu.org>
303
304 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
305 simple test for getloadavg and substitute GETLOADAVG_LIBS.
306 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
307
a3f08d9e
DL
3082000-06-19 Dave Love <fx@gnu.org>
309
310 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
311 _XOPEN_SOURCE is defined.
312
0a2ea235
GM
3132000-06-16 Gerd Moellmann <gerd@gnu.org>
314
315 * Makefile.in (distclean): Also make distclean in lisp/.
316
7d5c8691
EZ
3172000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
318
319 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
320
e9924e52
GM
3212000-06-15 Gerd Moellmann <gerd@gnu.org>
322
323 * make-dist: Add --help and --snapshot options.
324
9f817ea4
GM
3252000-06-14 Gerd Moellmann <gerd@gnu.org>
326
dce6b995
GM
327 * configure.in: Generate lisp/Makefile.
328
9f817ea4
GM
329 * configure.in: Add support for `*-lynxos*'.
330 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
331 recommended by <Karen.Dorhamer@compaq.com> to fix problems
332 on Tru64 UNIX v5.0.
333
97aa9c1d
KR
3342000-06-13 Ken Raeburn <raeburn@gnu.org>
335
336 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
337 it's on a continuation line.
338
d42122a3
DL
3392000-06-02 Dave Love <fx@gnu.org>
340
2082fe81
DL
341 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
342 files.
343
d42122a3
DL
344 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
345 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
346 test.
347
348 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
349 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
350
34ec9ebe
GM
3512000-05-26 Gerd Moellmann <gerd@gnu.org>
352
353 * configure.in: Add check for speed_t typedef.
354
50d7ce09
KR
3552000-05-25 Ken Raeburn <raeburn@gnu.org>
356
357 * Makefile.in (install-arch-dep): Install fns-*.el only if it
358 exists; it won't in the CANNOT_DUMP case.
359
10db7fc5
GM
3602000-05-25 Gerd Moellmann <gerd@gnu.org>
361
362 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
363 On FreeBSD, the exit status is 1 if CDPATH is not set.
8711588d 364 (install-arch-indep): Install ebrowse.info.
10db7fc5 365
087121cc
GM
3662000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
367
368 * configure.in: Check for grandpt and getpt.
369
b992884d
DL
3702000-05-09 Dave Love <fx@gnu.org>
371
372 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
373
056565f7
GM
3742000-05-05 Gerd Moellmann <gerd@gnu.org>
375
376 * make-dist: Make a link for lib-src/grep-changelog. Copy
377 install-sh.
378
35a28e21
EZ
3792000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
380
381 * config.bat: Identify the beginning of the cpp stuff in
382 src/Makefile.in and lib-src/Makefile.in more accurately.
383
c76e04a8
GM
3842000-04-27 Gerd Moellmann <gerd@gnu.org>
385
386 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
387
5e3dac3f
GM
3882000-04-19 Gerd Moellmann <gerd@gnu.org>
389
390 * configure.in: Add support for `powerpc-*-netbsd*'.
391
0b8f263e
DL
3922000-04-19 Dave Love <fx@gnu.org>
393
7825fef9
DL
394 * configure.in: Don't use AC_FUNC_GETLOADAVG.
395
0b8f263e
DL
396 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
397
3dd2781e
DL
3982000-04-16 Dave Love <fx@gnu.org>
399
400 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
401
3edfea34
DL
4022000-04-14 Dave Love <fx@gnu.org>
403
404 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
405
406 * aclocal.m4 (AC_FUNC_MKTIME): New.
407
4d6e16b3
KR
4082000-03-28 Ken Raeburn <raeburn@gnu.org>
409
410 * configure.in: Line up "--help" output a little better.
411
89e80928
GM
4122000-03-26 Gerd Moellmann <gerd@gnu.org>
413
087121cc 414 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
89e80928
GM
415 New targets.
416 (bootstrap): Rewritten in terms of the new targets above. Make
417 info files, too.
418
e1cff360
GM
4192000-03-12 Gerd Moellmann <gerd@gnu.org>
420
421 * config.guess, config.sub: Use the versions of the files from
422 subversions.
423
7397acc4
DL
4242000-03-08 Dave Love <fx@gnu.org>
425
426 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
427 AC_C_VOLATILE. Define POINTER_TYPE.
428
429 * aclocal.m4: New file.
430
d054101f 4312000-03-02 Gerd Moellmann <gerd@gnu.org>
2df636f4
GM
432
433 * configure.in (machine): Add `mipsel-*-netbsd*' and
434 `arm-*-netbsd*'.
d054101f
GM
435
4362000-03-01 Gerd Moellmann <gerd@gnu.org>
437
438 * configure.in (machine): Add support for `*-auspex-sunos*'.
439
ed4d0512
GM
4402000-02-29 Gerd Moellmann <gerd@gnu.org>
441
442 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
443
2dc95ddd
DL
4442000-02-18 Dave Love <fx@gnu.org>
445
446 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
447
57beb0e0
AS
4482000-02-18 Andreas Schwab <schwab@suse.de>
449
450 * Makefile.in (install-arch-indep): Add eudc to list of installed
451 info files.
452
3b3cc4a4
KR
4532000-02-17 Ken Raeburn <raeburn@gnu.org>
454
455 * configure.in: Include -lz and -ljpeg (if it's available) when
456 testing for the tiff library.
457
8389e1e2
GM
4582000-02-17 Gerd Moellmann <gerd@gnu.org>
459
460 * configure.in: Remove LISP_FLOAT_TYPE.
461
647847ea
DL
4622000-02-12 Dave Love <fx@gnu.org>
463
464 * configure.in: Use AC_FUNC_VFORK.
465
9a90d84c
GM
4662000-02-01 Gerd Moellmann <gerd@gnu.org>
467
5eea385d
GM
468 * make-dist: Various fixes for new development tree.
469
9a90d84c
GM
470 * leim-Makefile.in: New file.
471
b6680a0e
GM
4722000-01-31 Gerd Moellmann <gerd@gnu.org>
473
474 * Makefile.in (dist): Call ./make-dist.
475
1e5279b9
DL
4762000-01-24 Dave Love <fx@gnu.org>
477
478 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
479
ffe36136
GM
4802000-01-18 Gerd Moellmann <gerd@gnu.org>
481
482 * configure.in (HAVE_GIF): Check for DGifOpen instead of
483 DGifOpenFileName.
484
a970dae4
AS
4852000-01-11 Andreas Schwab <schwab@suse.de>
486
487 * Makefile.in (install-arch-indep): Update list of info files to
488 be installed.
489
c4bb2108
DL
4902000-01-05 Dave Love <fx@gnu.org>
491
492 * configure.in: Check for jerror.h as well as libjpeg.
493
bb9d2b64
AS
4942000-01-03 Andreas Schwab <schwab@suse.de>
495
496 * Makefile.in (install-arch-indep): Install autotype*. Run
497 install-info on autotype and emacs-faq.info.
498
22afa6e8
DL
4991999-12-04 Dave Love <fx@gnu.org>
500
501 * Makefile.in: (install-arch-indep): Depend on `info'.
502 (install-strip): Use `install' as sub-make target.
503
a21616bd
KR
5041999-11-23 Ken Raeburn <raeburn@gnu.org>
505
506 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
507 didn't need to be deleted. Check for the k5crypto library as well
508 as the crypto library; MIT Kerberos 1.1 changed the name.
509
946173ad
DL
5101999-11-18 Dave Love <fx@gnu.org>
511
512 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
513
4f6f5dab
GM
5141999-11-11 Erik Naggum <erik@naggum.no>
515
516 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
517
2323760c
DL
5181999-11-08 Dave Love <fx@gnu.org>
519
520 * configure.in: Fix change for --with-pop default.
521
c3d00920
DL
5221999-11-04 Dave Love <fx@gnu.org>
523
524 * configure.in: Default to --with-pop. Change sense of with-gcc
525 and with-toolkit-scroll-bars messages to reflect the defaults.
526
400a1ed0
GM
5271999-11-01 Gerd Moellmann <gerd@gnu.org>
528
529 * INSTALL: Mention the Emacs Lisp Reference.
530
1e3196e8
GM
5311999-10-27 Noah Friedman <friedman@splode.com>
532
533 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
534
8ac52782
GM
5351999-10-23 Gerd Moellmann <gerd@gnu.org>
536
537 * Makefile.in (bootstrap): New target.
538
1113b624
PE
5391999-10-19 Paul Eggert <eggert@twinsun.com>
540
541 Add support for large files. Merge glibc 2.1.2.
542
543 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
544 (HAVE_TM_GMTOFF): New symbol.
545 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
546 mbrlen, strsignal.
547 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
548
77162a4f
SM
5491999-10-09 Stefan Monnier <monnier@cs.yale.edu>
550
551 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
552 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
553
a2743e67
RS
5541999-10-09 Richard M. Stallman <rms@gnu.org>
555
556 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
557 Unset CDPATH to prevent cd from generating output.
558
37e2d8f4
SM
5591999-10-08 Stefan Monnier <monnier@cs.yale.edu>
560
561 * update-subdirs: also ignore CVS subdirs.
562
4e1d9c86
GM
5631999-10-07 Gerd Moellmann <gerd@gnu.org>
564
565 * Makefile.in (install-arch-indep): Add ada-mode.
566
2b6bac15
DL
5671999-10-06 Dave Love <fx@gnu.org>
568
569 * Makefile.in: Add rules for config.status, configure.
570
a4a9692d
DL
5711999-09-07 Gerd Moellmann <gerd@gnu.org>
572
573 * configure.in (--with-sound): Removed.
574
5751999-08-30 Gerd Moellmann <gerd@gnu.org>
576
577 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
578 the test for Xaw3d.
579 (HAVE_TIFF): Add -lm to library check.
580
5811999-08-28 Richard Stallman <rms@gnu.org>
582
583 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
584 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
585 after the other X-related libraries.
586
5871999-08-21 Dave Love <fx@gnu.org>
588
589 * configure.in: Don't check for jpeglib.h.
590
5911999-08-20 Gerd Moellmann <gerd@gnu.org>
592
593 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
594 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
595
5961999-08-18 Dave Love <fx@gnu.org>
597
598 * configure.in: : Check for termcap.h.
599
6001999-08-15 Gerd Moellmann <gerd@gnu.org>
601
602 * configure.in: Add --with-toolkit-scroll-bars. If "no",
603 use Emacs' scroll bars, even if configured for Motif or when
604 Xaw3d is available.
605
6061999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
607
608 * configure.in: Check for getaddrinfo.
609
6101999-08-04 Eli Zaretskii <eliz@gnu.org>
611
612 * config.bat: Make --no-debug work again by removing -gcoff.
613
6141999-07-30 Dave Love <fx@gnu.org>
615
616 * configure.in: Check for stdlib.h.
617
6181999-07-19 Dave Love <fx@gnu.org>
619
620 * configure.in: Grok sparc64-*-linux-gnu*.
621
6567e9b5
GM
622After the release of 20.4, development was split into two separate
623code lines. One line contained the code for Emacs 21, and the other
624one the code for the 20.x releases after 20.4. The following change
625log entries up to the entry ``20.4 released'' are for the 20.x code
626line. Change logs above this notice are those for the 21.x code line.
627
6282000-06-13 Gerd Moellmann <gerd@gnu.org>
629
630 * Version 20.7 released.
631
6322000-06-05 Gerd Moellmann <gerd@gnu.org>
633
634 * configure.in: Add powerpc*-*-linux-gnu*.
635
6362000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
637
638 * configure.in: Check for grandpt and getpt.
639
6402000-02-26 Gerd Moellmann <gerd@gnu.org>
641
642 * Version 20.6 released.
643
6442000-02-18 Dave Love <fx@gnu.org>
645
646 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
647
6482000-02-15 Gerd Moellmann <gerd@gnu.org>
649
650 * configure.in: Add support for arm*-g*-linux-gnu* systems.
651
6521999-12-04 Gerd Moellmann <gerd@gnu.org>
653
654 * Version 20.5 released.
655
6561999-11-28 Dave Love <fx@gnu.org>
657
658 * configure.in: Recognize sparc64-*-linux-gnu*.
659
6601999-11-11 Erik Naggum <erik@naggum.no>
661
662 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
663
6641999-08-04 Eli Zaretskii <eliz@gnu.org>
665
666 * config.bat: Make --no-debug work again by removing -gcoff.
667
a4a9692d
DL
6681999-07-12 Richard Stallman <rms@gnu.org>
669
670 * Version 20.4 released.
671
6721999-06-23 Karl Heuer <kwzh@gnu.org>
673
674 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
675 Quote $EMACS, in case it's a program with args.
676
6771999-05-29 Richard M. Stallman <rms@gnu.org>
678
679 * configure.in: Delete the Kerberos stuff.
680
6811999-05-27 Greg Hudson <ghudson@mit.edu>
682
683 * configure.in: Prefer kerberos 5 names.
684
6851999-04-26 Richard M. Stallman <rms@gnu.org>
686
687 * configure.in: Check for libXp.
688
6891999-04-08 Richard Stallman <rms@gnu.org>
690
691 * make-dist: Include change logs in subdirs of `lisp'.
692
6931999-04-05 Richard Stallman <rms@gnu.org>
694
695 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
696 (install-arch-indep): Make ${datadir}/emacs world-readable.
697
6981999-03-30 Eli Zaretskii <eliz@gnu.org>
699
700 * config.bat: Use epaths.* instead of paths.*.
701
7021999-03-07 Eli Zaretskii <eliz@gnu.org>
703
704 * INSTALL: Add detailed instructions to unpack and install
705 intlfonts on MS-DOS.
706
7071999-02-26 Richard Stallman <rms@gnu.org>
708
709 * configure.in: Use epaths.h and epaths-force instead of paths....
710
711 * Makefile.in (epaths-force): Renamed from paths-force;
712 operate on epaths.in and produce epaths.h.
713
7141999-02-24 Richard Stallman <rms@gnu.org>
715
716 * make-dist: Fix nt/icons directory handling.
717
7181999-02-22 Simon Josefsson <jas@pdc.kth.se>
719
720 * configure.in (f301-fujitsu-uxpv4.1): New target.
721
7221999-02-20 Richard Stallman <rms@gnu.org>
723
724 * make-dist (tempparent): Fix command to update info files.
725
7261999-02-09 Richard Stallman <rms@gnu.org>
727
728 * configure.in (powerpc-apple-netbsd*): New alternative.
729
7301999-01-25 Geoff Voelker <voelker@cs.washington.edu>
731
732 * make-dist: Include the new directory nt/icons in distributions.
733
7341999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
735
736 * configure.in: Change message about HAVE_XFREE386.
737
7381999-01-07 Eli Zaretskii <eliz@gnu.org>
739
740 * config.bat: Support configuring with leim.
741
7421998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
743
744 * configure.in (mips-sgi-irix6.5): New target.
745
7461998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
747
748 * configure.in: Remove GSS-API support, since it has been removed
749 from movemail.
750
7511998-12-04 Markus Rost <rost@delysid.gnu.org>
752
753 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
754
7551998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
756
757 * Makefile.in: Don't install customize info file. Run
758 install-info on viper info file.
759
7601998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
761
762 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
763
7641998-11-16 Kenichi Handa <handa@etl.go.jp>
765
766 * configure.in (*-*-bsdi4*): New target.
767
7681998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
769
770 * configure.in: Fix previous change.
771
7721998-11-11 Richard Stallman <rms@gnu.org>
773
774 * configure.in (aviion-intel): New machine.
775
7761998-11-04 Kenichi Handa <handa@etl.go.jp>
777
778 * configure.in (mips-nec-sysv4*): New target.
779
7801998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
781
782 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
783 from lisp.
784
7851998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
786
787 * make-dist: Don't include fns*.el in dist.
788
7891998-10-30 Dave Love <fx@gnu.org>
790
791 * configure.in: Don't mkdir cpp.
792
7931998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
794
795 * Makefile.in (install-arch-dep): Install src/fns-*.el in
796 ${archlibdir}.
797
7981998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
799
800 * Version 20.3 released.
801
8021998-07-30 Paul Eggert <eggert@twinsun.com>
803
804 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
805 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
806 (lwlib/Makefile, leim/Makefile):
807 Prepend $(srcdir)/ to rule dependencies outside this dir.
808
8091998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
810
811 * configure.in: Use unset CDPATH instead of making it empty.
812
8131998-06-20 Karl Heuer <kwzh@gnu.org>
814
815 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
816
8171998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
818
819 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
820 and default.el. Sort the results.
821
8221998-05-31 Karl Heuer <kwzh@gnu.org>
823
824 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
825 writable.
826
8271998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
828
829 * Makefile.in (install-arch-indep):
830 Don't alter site-lisp/subdirs.el if it exists.
831
8321998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
833
834 * Makefile.in (install-arch-indep): Put `-' on commands to create
835 subdirs.el in site-lisp dirs.
836
8371998-05-07 Richard Stallman <rms@psilocin.gnu.org>
838
839 * Makefile.in (install-arch-indep): Fix typo in previous change.
840
8411998-05-06 Richard Stallman <rms@psilocin.gnu.org>
842
843 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
844
8451998-04-28 Richard Stallman <rms@psilocin.gnu.org>
846
847 * Makefile.in (mkdir): Create the site-lisp dirs.
848 (install-arch-indep): Make site-lisp/subdirs files world-readable.
849
8501998-04-26 Richard Stallman <rms@psilocin.gnu.org>
851
852 * Makefile.in (INSTALL_INFO): New variable.
853 (install-arch-indep): Don't replace the dir file if it already exists.
854 Use the install-info program, via INSTALL_INFO, to add entries.
855 Make the `info' subdir and the Info files world-readable.
856
8571998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
858
859 * config.bat: Make sure the environment is large enough to support
860 all the "set foo=bar" commands. Update pointers to DJGPP FTP
861 sites.
862
8631998-04-10 Karl Heuer <kwzh@gnu.org>
864
865 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
866
8671998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
868
869 * configure.in: Add --with-gssapi to specify GSS-API
870 authentication support for movemail.
871
8721998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
873
874 * Makefile.in (install-arch-indep): Fix previous change.
875
8761998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
877
878 * Makefile.in (info): Run man in build dir, not srcdir.
879
8801998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
881
882 * Makefile.in (install-arch-indep): Fix previous change.
883
8841998-03-23 Kenichi Handa <handa@etl.go.jp>
885
886 * Makefile.in (top_distclean): Check the existence of `lock'
887 subdir.
888
8891998-03-22 Richard Stallman <rms@gnu.org>
890
891 * Makefile.in (install-arch-indep): Put special subdirs.el files
892 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
893
8941998-03-21 Richard Stallman <rms@psilocin.gnu.org>
895
896 * make-dist: Fix shell syntax in check for missing .el or .elc files.
897
8981998-03-09 Richard Stallman <rms@psilocin.gnu.org>
899
900 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
901 (m68*-hp-hpux*): Handle versions 1X like 10.
902
9031998-03-07 Richard Stallman <rms@psilocin.gnu.org>
904
905 * make-dist: PROBLEMS is now in etc, not top level dir.
906
907 * Makefile.in (SOURCES): Delete PROBLEMS.
908
9091998-02-25 Richard Stallman <rms@gnu.org>
910
911 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
912
913 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
914
9151998-01-17 Richard Stallman <rms@gnu.org>
916
917 * Makefile.in (install-arch-indep): Add semicolon before `else'.
918
9191998-01-02 Richard Stallman <rms@psilocin.gnu.org>
920
921 * make-dist (tempparent): New option --no-check.
922
923 * make-dist: Don't do anything with cpp directory.
924
9251997-12-20 Richard Stallman <rms@psilocin.gnu.org>
926
927 * configure.in (sparc-fujitsu-sysv4*): New target.
928
9291997-12-17 Andreas Schwab <schwab@gnu.org>
930
931 * configure.in: Cache more tests. Add missing quotes around
932 message with embedded comma.
933
9341997-12-04 Karl Heuer <kwzh@gnu.org>
935
936 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
937
9381997-11-26 Joel N. Weber II <devnull@gnu.org>
939
940 * make-dist: Changed the comment about `umask 0' to say `Don't
941 restrict access to any files.'; previously it said `Don't protect
942 any files', which may have implied that we think fascism is good.
943
9441997-11-24 Paul Eggert <eggert@twinsun.com>
945
946 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
947 strftime needs the underlying host's strftime for locale dependent
948 formats.
949
9501997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
951
952 * configure.in (i586-dg-dguxR4.*): New name in case branch.
953
9541997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
955
956 * config.bat: Configure the man subdirectory.
957
9581997-11-07 Paul Eggert <eggert@twinsun.com>
959
960 * configure.in (AC_CHECK_LIB): Add -lintl.
961
9621997-11-07 Karl Heuer <kwzh@gnu.org>
963
964 * make-dist (check for .elc files): Avoid bash-specific syntax.
965 (check for overflow 14-char limit): Simplify.
966
9671997-11-07 Richard Stallman <rms@gnu.org>
968
969 * Makefile.in (install): Move blessmail last.
970
9711997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
972
973 * configure.in (gettimeofday, one arg or two):
974 Clarify messages by avoiding double negative.
975
9761997-09-30 Karl Eichwalder <ke@suse.de>
977
978 * Makefile.in (install-arch-indep): install the widget info file.
979
9801997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
981
982 * configure.in (with-pop, with-kerberos): Need to check Kerberos
983 libraries in reverse order, so that libraries will appear in the
984 correct dependency order on the link line (and so that the
985 configure checks themselves will work properly when early
986 libraries depend on later ones).
987
9881997-09-21 Erik Naggum <erik@naggum.no>
989
990 * make-dist (making links to `src'): Keep timestamp on copied
991 files.
992
993 * make-delta: New script to produce delta distributions.
994
9951997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
996
997 * Version 20.2 released.
998
9991997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1000
1001 * Version 20.1 released.
1002
1003 * Makefile.in (install-leim): Depend on mkdir.
1004 (leim): Depend on src.
1005
10061997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1007
1008 * configure.in: Recognize alpha* instead of just alpha.
1009
10101997-09-12 Paul Eggert <eggert@twinsun.com>
1011
1012 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1013
10141997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1015
1016 * update-subdirs: Use rm -f.
1017
10181997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1019
1020 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1021 Ignore subdirs named Old.
1022
10231997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1024
1025 * configure.in: Add OpenBSD clause to set $machine.
1026
10271997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1028
1029 * make-dist: Recompile everything after updating various Lisp files.
1030 Recompile in leim as well as lisp.
1031 Check in leim as well as lisp for mismatched files and too-long names.
1032
10331997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1034
1035 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1036
10371997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1038
1039 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1040 before trying to copy anything from it.
1041
10421997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1043
1044 * Makefile.in (man/Makefile): New target.
1045 (tags): Define env var EMACS and run Makefile from build dir.
1046
10471997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1048
1049 * config.bat: If src/_gdbinit doesn't exist, try using
1050 src/.gdbinit to create it (for building on Windows 95).
1051
10521997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1053
1054 * Makefile.in (install-arch-indep):
1055 Discard extra data in tar | tar pipes.
1056
10571997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1058
1059 * configure.in (x_default_search_path): Corrected
1060 '${x_library}' to '${x_library}/X11'.
1061
10621997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1063
1064 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1065
10661997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1067
1068 * configure.in: Support auto-configuration of both Kerberos V4 and
1069 Kerberos V5 for movemail, including detection of V4 and V5 header
1070 files and libraries.
1071
10721997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1073
1074 * configure.in: Compute x_default_search_path
1075 and substitute into makefiles.
1076
1077 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1078
10791997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1080
1081 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1082
10831997-08-07 Erik Naggum <erik@naggum.no>
1084
1085 * configure.in: Remove lockdir, it is no longer needed.
1086 * Makefile.in (mkdir): Don't create lockdir.
1087 (lockdir): Variable deleted.
1088 (paths-force): Don't operate on PATH_LOCK.
1089
10901997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1091
1092 * leim-Makefile.in (clean, distclean): New targets.
1093
1094 * make-dist: Include leim/ChangeLog in leim distribution.
1095
10961997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1097
1098 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1099
11001997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1101
1102 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1103
11041997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1105
1106 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1107
11081997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1109
1110 * make-dist: Update leim/leim-list.el.
1111 Pass along value of $EMACS when updating lisp dir.
1112
11131997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1114
1115 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1116 prerequisite to the use of Doug Lea's malloc.
1117
11181997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1119
1120 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1121
1122 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1123
11241997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1125
1126 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1127
11281997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1129
1130 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1131 to news-r6.h.
1132
11331997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1134
1135 * config.bat: Use `sed' instead of `cp', which might not be
1136 installed.
1137
11381997-07-09 Kenichi Handa <handa@etl.go.jp>
1139
1140 * Makefile.in (mostlyclean): Add cleaning leim directory.
1141 (clean, distclean, maintainer-clean): Likewise.
1142
11431997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1144
1145 * make-dist (bogosities): Check subdirs of `lisp' also.
1146
11471997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1148
1149 * make-dist (etc): Really avoid symlinks now.
1150 (lisp): Don't delete from subdirs the things we never copy.
1151
11521997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1153
1154 * Makefile.in (install-arch-indep): Correct the target name.
1155 The first letter `i' was dropped by the previous change of mine.
1156
11571997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1158
1159 * configure.in (leim/Makefile): Generate this.
1160 (*-sysv4.2uw*): Recognize new alternative.
1161
1162 * leim-Makefile.in: Renamed from leim-Makefile.
1163
1164 * make-dist: Set up real-leim subdirectory,
1165 with the real contents of leim; then move it to
1166 a separate top-level directory.
1167
1168 * make-dist: Don't mention site-lisp, site-init, site-start
1169 or default, when listing files hat are not compiled and should be.
1170
1171 * configure.in: Create src/config.stamp at the end.
1172
11731997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1174
1175 * Makefile.in (install-leim): Correct previous change.
1176
11771997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1178
1179 * Makefile.in (install-leim): New target.
1180 (install): Depend on install-leim.
1181
11821997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1183
1184 * Makefile.in (SUBDIR): Add leim.
1185 (SUBDIR_MAKEFILES): Add leim/Makefile.
1186 (leim/Makefile): New target.
1187
11881997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1189
1190 * leim-Makefile: New file.
1191 * make-dist: Initialize a `leim' subdirectory with that makefile.
1192
11931997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1194
1195 * configure.in (GNU_MALLOC_reason): Fix message text.
1196
11971997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1198
1199 * make-dist (lisp): Don't process subdirs that start with =.
1200 (etc): Copy symlinks, as in src.
1201
12021997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1203
1204 * configure.in (i*86-*-unixware*): New alternative.
1205
12061997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1207
1208 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1209 and touch it explicitly.
1210
1211 * configure.in (mips-sony-newsos6*): New alternative.
1212 (mips-*-linux-gnu*): New alternative.
1213 (*-*-bsdi*): New alternative.
1214 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1215
12161997-06-22 Dave Love <d.love@dl.ac.uk>
1217
1218 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1219 movemail.o).
1220 (src/config.h): New target to re-configure if src/config.in
1221 is patched.
1222
12231997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1224
1225 * configure.in (shutdown): Check for `shutdown' function.
1226
12271997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1228
1229 * update-subdirs: Include the directory "language" in subdirs.
1230
12311997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1232
1233 * configure.in (m88k-dg-dgux4*): New alternative.
1234 (alpha-*-netbsd*): New alternative.
1235 (powerpcle-*-solaris2*): New alternative.
1236
12371997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1238
1239 * make-dist: Warn about .el files that are not compiled.
1240
12411997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1242
1243 * Makefile.in (dist): Don't run update-subdirs here,
1244 since make-dist now gets that done.
1245
1246 * make-dist: Use the new `updates' target in lisp/Makefile.
1247
1248 * make-dist: Use new non-file targets in lisp/Makefile.
1249
12501997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1251
1252 * make-dist: Handle all subdirs of `lisp' uniformly.
1253 Don't handle `term' and `language' specially.
1254 Clear out umask at the beginning.
1255
12561997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1257
1258 * make-dist: Use Make to update finder-inf.el and autoloads.
1259 Also update cus-load.el.
1260
12611997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1262
1263 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1264 in case it is desirable to disable the GNU malloc features with
1265 glibc.
1266
12671997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1268
1269 * configure.in (DOUG_LEA_MALLOC):
1270 Define if malloc_{get,set}_state exist.
1271
12721997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1273
1274 * make-dist: Make links for files under lisp/language.
1275
12761997-02-20 Kenichi Handa <handa@etl.go.jp>
1277
1278 * update-subdirs: Exclude the directory "language" from subdirs.
1279
12801997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1281
1282 * configure.in: Check for rint and cbrt.
1283
12841997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1285
1286 * make-dist: Use $EMACS to say where to run Emacs.
1287 Add --no-update option.
1288
12891996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1290
1291 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1292
12931996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1294
1295 * make-dist (copying src): Check thoroughly for symlinks
1296 and copy them in all cases. Regularize the linking of *.in
1297 and *.opt and ChangeLog files.
1298 (copying lib-src): Likewise.
1299 Don't rm getdate.c or y.tab.*--they don't exist any more.
1300
13011996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1302
1303 * configure.in: Check for libmail, maillock.h and
1304 touchlock (for movemail).
1305
13061996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1307
1308 * configure.in (limits.h): Check for this file.
1309
13101996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1311
1312 * configure.in (rs6000-ibm-aix4.2): New alternative.
1313 (rs6000-ibm-aix4.0): New alternative.
1314 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1315
13161996-11-22 Ben Harris <bjh21@cam.ac.uk>
1317
1318 * configure.in: Recognize vax-*-netbsd*.
1319
13201996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1321
1322 * configure.in (locallisppath): Add leim directory.
1323
13241996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1325
1326 * config.bat: Make sure `mv' supports forward slashes and -f.
1327
13281996-10-28 Christian Limpach <chris@nice.ch>
1329
1330 * configure.in (hppa*-next-nextstep*): * added after hppa
1331 to accept hppa1.0 and hppa1.1.
1332
13331996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1334
1335 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1336 * configure.in (ld_switch_machine): Fix typo.
1337
13381996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1339
1340 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1341 from config.h and use them in $ac_link.
1342
13431996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1344
1345 * configure.in: Create a subdir named `lisp'.
1346
13471996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1348
1349 * configure.in: Check for getcwd.
1350
13511996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1352
1353 * configure.in: Check for termios.h. Check for setpgid.
1354
13551996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1356
1357 * configure.in: Check for setrlimit.
1358
13591996-08-31 Paul Eggert <eggert@twinsun.com>
1360
1361 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1362
13631996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1364
1365 * configure.in: Check for utimes.
1366
1367 * configure.in: Check for com_err library, but only
1368 if --with-kerberos was used. Check for krb and des
1369 only if --with-kerberos.
1370
13711996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1372
1373 * Makefile.in (INSTALL_STRIP): New variable.
1374 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1375 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1376
13771996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1378
1379 * configure.in: Check for krb and des libraries.
1380
13811996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1382
1383 * configure.in (*-sunos4.1.[3-9]*noshare):
1384 Use sunos413, not sunos4-1-3.
1385 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1386 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1387
13881996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1389
1390 * Makefile.in (src/paths.h): Target deleted.
1391 (paths-force): Delete all dependencies on this target
1392 but don't delete the target.
1393 (install): Depend on `all'.
1394 (paths-force): Don't print a message.
1395
1396 * configure.in: Generate src/paths.h here.
1397
13981996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1399
1400 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1401 New variables that affect linking only.
1402 (alpha-dec-osf*): Use those instead of previous change.
1403
14041996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1405
1406 * Makefile.in (install-arch-indep): Install info/messages.
1407
14081996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1409
1410 * Version 19.33 released.
1411
14121996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1413
1414 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1415 Fix previous change.
1416
14171996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1418
1419 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1420 New alternative.
1421
14221996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1423
1424 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1425 and NON_GCC_TEST_OPTIONS.
1426
14271996-08-06 Paul Eggert <eggert@twinsun.com>
1428
1429 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1430 "TZ=..." in environ.
1431
14321996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1433
1434 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1435
14361996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1437
1438 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1439 the more general *-sunos4.1.[3-9]* clause.
1440
14411996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1442
1443 * Version 19.32 released.
1444
1445 * configure.in (*-sco3.2v5*):
1446 Set OVERRIDE_CPPFLAG to a string of one space.
1447 Fix the code that uses OVERRIDE_CPPFLAG.
1448
14491996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1450
1451 * configure.in: Undo previous change.
1452
14531996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1454
1455 * config.sub: Use `pc', not `unknown', when canonicalizing
1456 the vendor for ...86.
1457
14581996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1459
1460 * configure.in: Check for termios.h header.
1461
14621996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1463
1464 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1465
14661996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1467
1468 * configure.in: Split bsdos2 and bsdos2-1.
1469
14701996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1471
1472 * config.sub: If last two words are not a recognized
1473 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1474 Make conversion of gnu/linux to linux-gnu really work.
1475
1476 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1477
14781996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1479
1480 * configure.in (check for using Lucid widgets by default):
1481 Eliminate indentation that confuses some compilers.
1482
14831996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1484
1485 * config.sub: Convert linux and gnu/linux to linux-gnu.
1486
1487 * make-dist: Don't update getdate.c.
1488 Ignore =... files when checking for too-long Lisp file names.
1489
14901996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1491
1492 * configure.in (euidaccess): Check for that, not for eaccess.
1493
14941996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1495
1496 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1497 before `noshare'.
1498 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1499
15001996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1501
1502 * configure.in: Rename lignux to linux-gnu in configuration names.
1503 Use gnu-linux as the opsys value (s/ file name).
1504 Allow i686 just like i386, i486, i586.
1505
15061996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1507
1508 * configure.in (i*86-*-sco3.2v5): New alternative.
1509 (OVERRIDE_CPPFLAG): New variable.
1510 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1511
1512 * configure.in: Specify vpath for .texi files.
1513
15141996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1515
1516 * configure.in: Always check for HAVE_X11R5.
1517 Separately decide whether to use a toolkit by default.
1518
15191996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1520
1521 * configure.in: If X11R5 is missing the Xaw headers,
1522 default to --with-x-toolkit=no.
1523
15241996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1525
1526 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1527
15281996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1529
1530 * Makefile.in (install-arch-indep): If cd etc makes output,
1531 don't treat that as part of the tar data.
1532 Check that ./lisp actually exists.
1533
15341996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1535
1536 * make-dist: Check for long file names.
1537
15381996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1539
1540 * Version 19.31 released.
1541
15421996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1543
1544 * configure.in: Recognize sparc-*-lignux.
1545
15461996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1547
1548 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1549 Don't include config.w95.
1550
15511996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1552
1553 * make-dist: Replace --no-clean-up and --no-tar options
1554 with --clean-up and --tar, so that the default is useful.
1555
15561996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1557
1558 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1559 if not, tell the user to rename it and abort.
1560
15611996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1562
1563 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1564 test program.
1565
15661996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1567
1568 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1569
1570 * make-dist (MANIFEST): Fix previous change.
1571 (msdos): Put mainmake.v2 into the dist.
1572
15731996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1574
1575 * make-dist: Exit if autoconf fails.
1576
15771996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1578
1579 * config.bat: Set djgpp-ver, and unset it at the end.
1580 Add a number ofconditionals for DJGPP version 2.
1581 Rename label libsrc2 to libsrc3.
1582 Substitute for LDFLAGS in src/Makefile.
1583 Substitute for ALL_CFLAGS in lib-src/Makefile.
1584
15851996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1586
1587 * configure.in (ncurses): Check this after checking fns like strerror.
1588
15891996-04-08 Erik Naggum <erik@naggum.no>
1590
1591 * make-dist (MANIFEST): Don't include lines from =files.
1592
15931996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1594
1595 * make-dist: Don't put lisp/dired.todo in the dist.
1596
15971996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1598
1599 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1600
1601 * configure.in (setlocale): Check for it.
1602
1603 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1604
16051996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1606
1607 * configure.in: Use lignux instead of linux as value of opsys.
1608
16091996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1610
1611 * Makefile.in (install-strip): Fix whitespace.
1612 Get rid of continuation.
1613
1614 * config.sub: Convert linux or gnu/linux to lignux.
1615
16161996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1617
1618 * configure.in: Accept lignux in configuration name.
1619
16201996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1621
1622 * Makefile.in (install-strip): New target.
1623
16241996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1625
1626 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1627 -f failed to do the job on Suns.
1628
16291996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1630
1631 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1632
1633 * configure.in (linux/version.h): Check for this header.
1634
16351996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1636
1637 * configure.in: Remove -fno-builtin hackery from -lm check.
1638
16391996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1640
1641 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1642 just this test.
1643
1644 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1645
16461996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1647
1648 * configure.in: Check for ncurses.
1649
16501996-02-28 Paul Eggert <eggert@twinsun.com>
1651
1652 * configure.in (LOCALTIME_CACHE):
1653 Also define if localtime mishandles unsetting TZ.
1654 This works around a localtime bug in mips-dec-ultrix.
1655
16561996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1657
1658 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1659
1660 * configure.in: Improve messages about X versions.
1661
16621996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1663
1664 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1665
16661996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1667
1668 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1669 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1670
1671 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1672 (install): Put install-arch-indep before install-arch-dep.
1673
16741996-02-20 Dave Love <d.love@dl.ac.uk>
1675
1676 * INSTALL: Clarify info about MS-DOS path handling.
1677
16781996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1679
1680 * Makefile.in (install-arch-indep): Install info/ccmode*.
1681 In previous change, protect against /bin/pwd returning null string.
1682
16831996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1684
1685 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1686 to lispdir.
1687
16881996-02-01 Paul Eggert <eggert@twinsun.com>
1689
1690 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1691
16921996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1693
1694 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1695
16961996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1697
1698 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1699 we delete everything distclean deletes.
1700
17011996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1702
1703 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1704
17051996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1706
1707 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1708 into LDFLAGS instead of into LIBS.
1709
17101996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1711
1712 * configure.in (HAVE_XMU): Fix typo in previous change.
1713
17141996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1715
1716 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1717
17181996-01-10 Erik Naggum <erik@naggum.no>
1719
1720 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1721
17221996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1723
1724 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1725
17261996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1727
1728 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1729 and use -lXt to link it.
1730
17311996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1732
1733 * configure.in (locallisppath): Put version-specific dir first.
1734
17351996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1736
1737 * configure.in (hppa-*-nextstep*): New alternative.
1738 (USE_X_TOOLKIT): By default, set this to "maybe";
1739 and change that later to LUCID or "no" according to X11 version.
1740
1741 * make-dist: Recompile outdated .elc files and update all autoloads.
1742
17431996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1744
1745 * configure.in (locallisppath): Fix typo in last change: " -> '.
1746
17471996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1748
1749 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1750
17511995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1752
1753 * Makefile.in (install-arch-indep): Give all files read permission.
1754
17551995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1756
1757 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1758 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1759
17601995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1761
1762 * configure.in: Determine HAVE_X11R6.
1763 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1764
17651995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1766
1767 * configure.in: Just "solaris" now defaults to version 2.4.
1768 Add sunos4.1.n-noshare as alternative.
1769
17701995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1771
1772 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1773
17741995-11-29 Erik Naggum <erik@naggum.no>
1775
1776 * Makefile.in (install-arch-indep): Add missing backslash.
1777
17781995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1779
1780 * Makefile.in (install-arch-indep): Don't install
1781 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1782
17831995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1784
1785 * Makefile.in (install-arch-indep): Fix previous change.
1786
1787 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1788
17891995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1790
1791 * Version 19.30 released.
1792
1793 * make-dist (lisp): Exclude subdirs.el.
1794
17951995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1796
1797 * make-dist (etc): Delete *.orig and *.rej.
1798
17991995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1800
1801 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1802
18031995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1804
1805 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1806
18071995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1808
1809 * make-dist (nt): Rename install, readme, and todo to
1810 INSTALL, README, and TODO.
1811
18121995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1813
1814 * make-dist (lisp): Don't distribute site-start.
1815
18161995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1817
1818 * make-dist: Break the hard link on alloca.c.
1819
18201995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1821
1822 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1823
18241995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1825
1826 * make-dist (src, lib-src): Don't distribute Makefile.c.
1827 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1828
18291995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1830
1831 * Makefile.in (mkdir): Create man1dir, not mandir.
1832 (uninstall): Use man1dir, not mandir.
1833
18341995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1835
1836 * Makefile.in (man1dir): New variable.
1837 (install-arch-indep): Use man1dir.
1838
1839 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1840
1841 * make-dist: Create lisp/MANIFEST.
1842
18431995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1844
1845 * configure.in (m68k-*-linux*): New alternative.
1846
18471995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1848
1849 * make-dist: Use new names config.in, paths.in, and
1850 {src,lib-src}/Makefile.in.
1851
18521995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1853
1854 * configure.in: Don't bother checking for drem.
1855
18561995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1857
1858 * Makefile.in (distclean): Delete line with just a tab in it.
1859 (install-arch-indep): Delete spaces that precede tabs.
1860 Delete spurious `fi' left from previous change.
1861 (install): Supply `true' as command, to avoid null command.
1862
18631995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1864
1865 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
1866
18671995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1868
1869 * configure.in (powerpc-*-solaris2): New alternative.x
1870
18711995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
1872
1873 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
1874 of paths.h.tmp$$, to avoid going beyond 14 characters.
1875
18761995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1877
1878 * configure.in: Improve error msg for invalid --with-x-toolkit value.
1879
18801995-09-06 Paul Eggert <eggert@twinsun.com>
1881
1882 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
1883 if localtime caches TZ. Check for tzset.
1884
18851995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1886
1887 * config.bat: Simplify using new names file names src/makefile.in,
1888 config.in, paths.in. Change Echo commands not to use `.
1889
18901995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1891
1892 * Makefile.in (install-arch-indep): Always install the new dir file;
1893 rename the previous dir file to dir.bak or dir.old.
1894
18951995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1896
1897 * configure.in (RANLIB): Substitute this into makefiles.
1898 Set it specially on solaris; set it by default on other systems.
1899
1900 * configure.in: Fix previous Alpha change.
1901
19021995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1903
1904 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
1905 NON_GCC_TEST_OPTIONS.
1906
19071995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1908
1909 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
1910 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
1911
1912 * configure.in (alpha-*-linux*): New configuration.
1913
19141995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1915
1916 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
1917 (m68k-next-nextstep*): New alias for that.
1918 (i*86-*-nextstep*): Use nextstep.h.
1919 (sparc-*-nextstep*): New configuration.
1920
19211995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1922
1923 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
1924 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
1925
19261995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1927
1928 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
1929 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
1930
19311995-07-18 Mike Long <mike.long@analog.com>
1932
1933 * make-dist: Fix update of finder-inf.el, and byte-compile it.
1934
19351995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1936
1937 * Makefile.in (src/paths.h, paths-force):
1938 Rename src/paths.h.in to src/paths.in.
1939 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
1940
1941 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
1942 Use Makefile.c for intermediate file.
1943 Rename src/config.h.in to src/config.in.
1944
19451995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
1946
1947 * configure.in (mips-dec-ultrix*): Assume version 4.3.
1948 (mips-dec-ultrix4.[12]): New alternative for old versions.
1949
19501995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1951
1952 * make-dist: Don't break intra-tree links.
1953
19541995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1955
1956 * configure.in: Put back archlibdir initialization. Require
1957 autoconf 2.4.1 or later.
1958
19591995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1960
1961 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
1962 (mips-mips-riscos5*): New alternative.
1963
19641995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1965
1966 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
1967
19681995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1969
1970 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
1971 (mandir, infodir, archlibdir): Initializations deleted.
1972
1973 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
1974 On hpux9shr, use hpux9shxr4.h.
1975
19761995-06-24 Morten Welinder <terra+@cs.cmu.edu>
1977
1978 * configure.in: Added target mips-dec-mach_bsd4.3.
1979 * config.guess: Guess mips-dec-mach_bsd4.3.
1980
19811995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1982
1983 * Makefile.in (mkdir): Use symbolic chmod.
1984
19851995-06-22 Paul Eggert <eggert@twinsun.com>
1986
1987 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
1988 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
1989
19901995-06-22 Paul Eggert <eggert@twinsun.com>
1991
1992 * Makefile.in (SUBDIR_MAKEFILES):
1993 Add man/Makefile, so `make distclean' removes it.
1994 (top_distclean): Add config.log to the list of files to be removed.
1995
19961995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1997
1998 * Version 19.29 released.
1999
20001995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2001
2002 * configure.in: Fix the previous change to verify that the -b
2003 option really solves the problem.
2004
2005 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2006
20071995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2008
2009 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2010
20111995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2012
2013 * configure.in: Report more clearly when there is no special
2014 dir to search for X includes or libraries.
2015
20161995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2017
2018 * configure.in: Check for -lpthreads, not -lpthread.
2019
20201995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2021
2022 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2023
20241995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2025
2026 * configure.in: Check for -lpthread.
2027
20281995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2029
2030 * Makefile.in (install-arch-indep): Install info files for mh-e.
2031 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2032
20331995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2034
2035 * configure.in (*-solaris2.5): New configuration.
2036
2037 * make-dist: Copy new files config.nt and config.w95.
2038
20391995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2040
2041 * configure.in: Use x_includes, not x_libraries, for -I.
2042 Make bitmapdir a colon-separated list.
2043
20441995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2045
2046 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2047
2048 * configure.in: Allow x_libraries and x_includes to be paths.
2049
20501995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2051
2052 * configure.in: Fix typo.
2053
20541995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2055
2056 * INSTALL: Clarify use of site-init.el.
2057
20581995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2059
2060 * configure.in: pass arg to sqrt.
2061
20621995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2063
2064 * make-dist: Fix May 6 change.
2065
20661995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2067
2068 * vpath.sed: Delete reference to ymakefile.
2069
20701995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2071
2072 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2073 check.
2074
20751995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2076
2077 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2078
2079 * update-subdirs: Specify /bin/sh to run the script.
2080
20811995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2082
2083 * make-dist: Put src/makefile.nt in dist.
2084
2085 * configure.in (i[345]86-*-bsdi2*): New configuration.
2086 (vax-dec-bsd386*): Deleted.
2087
20881995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2089
2090 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2091 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2092 instead of logb in -lm check.
2093
20941995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2095
2096 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2097 Use bsd4-3. Don't set NON_GNU_CPP.
2098
2099 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2100 In nt. copy various different things, but not *.cmd.
2101 Fix the ln commands for the subdirs of nt.
2102
21031995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2104
2105 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2106
21071995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2108
2109 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2110 since that's what the header file expects.
2111
21121995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2113
2114 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2115 and 68040 based machines when choosing options for gnucc.
2116
21171995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2118
2119 * Makefile.in (top_distclean): Delete config.cache.
2120
21211995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2122
2123 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2124
2125 * configure.in: Use m/ncr386.h.
2126
21271995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2128
2129 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2130
21311995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2132
2133 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2134 (man): Don't copy texindex.c and getopt.c; they're deleted.
2135 (etc): Omit `e'; it's a subdirectory.
2136 (etc/e): Use `../..', not `..', to reference top level.
2137
21381995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2139
2140 * Makefile.in (install-arch-indep, dist):
2141 look for `update-subdir' in $(srcdir).
2142
21431995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2144
2145 * make-dist: Include mkinstalldirs in distribution.
2146
21471995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2148
2149 * make-dist: Add missing close backquote.
2150
21511995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2152
2153 * make-dist: Don't distribute shortnames directory.
2154
21551995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2156
2157 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2158
21591995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2160
2161 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2162
21631995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2164
2165 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2166
21671995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2168
2169 * configure.in (mips-sgi-irix6): New configuration.
2170
21711995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2172
2173 * Makefile.in (maintainer-clean): Renamed from realclean.
2174
21751995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2176
2177 * configure.in: Create a .gdbinit that sources the real one, if
2178 using a different build directory.
2179
21801995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2181
2182 * configure.in: Check for sys/select.h.
2183
21841995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2185
2186 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2187
21881994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2189
2190 * configure.in: Handle isc 4.1 operating system.
2191
21921994-12-10 Richard Stallman <rms@kepa>
2193
2194 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2195 (rs6000-ibm-aix4*): New alternative.
2196
21971994-12-06 Richard Stallman <rms@kepa>
2198
2199 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2200
22011994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2202
2203 * configure.in: Don't try to make directories that are guaranteed
2204 to already exist.
2205
22061994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2207
2208 * configure.in: Generate man/Makefile from man/Makefile.in.
2209 Create the man subdir.
2210
2211 * Makefile.in (dvi): Run Make in our man subdir.
2212
2213 * make-dist: Create subdir etc/e.
2214 Make links to it.
2215 Put man/Makefile.in in dist, instead of man/Makefile.
2216
22171994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2218
2219 * configure.in: Add --with-pop, --with-kerberos, and
2220 --with-hesiod for movemail.
2221
22221994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2223
2224 * configure.in (m68*-apollo*): Use s/domain.h.
2225
22261994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2227
2228 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2229
22301994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2231
2232 * configure.in: Don't add -I, -L, -R options for cc if their
2233 arguments would be empty.
2234
22351994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2236
2237 * configure.in (i860-intel-osf1*): New alternative.
2238 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2239 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2240
22411994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2242
2243 * configure.in: Make h_errno check not use nested functions.
2244
22451994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2246
2247 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2248
22491994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2250
2251 * Makefile.in (install-arch-indep): Avoid continued comment
2252 swallowing target line.
2253
22541994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2255
2256 * configure.in: Protect a character class with `changequote'.
2257
22581994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2259
2260 * configure.in: Accept `news' as a synonym for `newsos'.
2261
22621994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2263
2264 * Makefile.in: Don't rm files if cd fails.
2265
22661994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2267
2268 * make-dist: Put nt subdir and its subdirs in the dist.
2269 (lib-src): Put makefile.nt in the dist.
2270 (lisp): Put makefile.nt in the dist.
2271
22721994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2273
2274 * configure.in: Change a stray `[' to `test'.
2275
22761994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2277
2278 * configure.in: Adapt for Autoconf v2. Use the standard argument
2279 parser, host type canonicalizer, X11 finder, and message
2280 printing macros. Use the new macro names. Use `test' instead of `['.
2281
22821994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2283
2284 * configure.in: Check for getpagesize.
2285
22861994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2287
2288 * make-dist (msdos): Put sed* in the distribution.
2289
22901994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2291
2292 * config.bat: New option, `--with-x', for configuring Emacs
2293 for use with the X11 system DesqView/X.
2294 New option, `--no-debug', for compiling Emacs without debug
2295 information thus saving disk space.
2296 (src/config.h, src/paths.h): Use `update' (which is like
2297 `move-if-changed') to change the file.
2298 (src/config.h): When configuring for X11 perform extra changes.
2299 (src/makefile): When configuring for X11 perform extra changes.
2300 (lib-src): Remove temporary files.
2301 (): Check that `sed', `rm', `mv', and `gcc' are available.
2302
23031994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2304
2305 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2306
2307 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2308
23091994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2310
2311 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2312
2313 * configure.in (canonical): Substitute var into makefiles.
2314 (bitmapdir): Likewise.
2315
2316 * Makefile.in (bitmapdir): New variable.
2317 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2318
23191994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2320
2321 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2322
2323 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2324 * update-subdirs: New shell script.
2325
23261994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2327
2328 * Makefile.in (top_distclean): Don't rm build-install.
2329 (SOURCES): Delete build-install.in.
2330
2331 * make-dist: Don't distribute build-ins.in.
2332 * build-ins.in: File deleted.
2333
23341994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2335
2336 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2337
23381994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2339
2340 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2341
2342 * configure.in (libexecdir): Renamed from libdir. New default.
2343 (sharedstatedir): Renamed from statedir. New default.
2344 (datadir): New default.
2345
2346 * make-dist: Don't distribute subdirs.el.
2347
23481994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2349
2350 * configure.in (eaccess): Check for it.
2351
23521994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2353
2354 * configure.in (mktime): Check for it.
2355
23561994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2357
2358 * configure.in (motif): Add support for usage and option checking.
2359
23601994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2361
2362 * configure.in (utimes): Check for it.
2363
23641994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2365
2366 * Makefile.in (install-arch-indep): Don't do mkdir here.
2367
23681994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2369
2370 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2371 riscix.h renamed to acorn.h.
2372
23731994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2374
2375 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2376 New configurations.
2377
23781994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2379
2380 * configure.in: Remove trailing slashes from srcdir.
2381
23821994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2383
2384 * configure.in (i[345]86-sequent-ptx*): Handle
2385
23861994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2387
2388 * Makefile.in (paths-force): Depend on src/paths.h
2389
23901994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2391
2392 * configure.in (config_options): Save all arguments, not just some.
2393
23941994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2395
2396 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2397
2398 * configure.in: Add AC_AIX.
2399 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2400
24011994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2402
2403 * configure.in (parsing options): Simplify sed command to delete -'s.
2404
24051994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2406
2407 * configure.in (config_options): New shell variable.
2408 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2409
24101994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2411
2412 * configure.in (alpha-dec-osf*): New target.
2413
2414 * Makefile.in: Use just one FRC target.
2415
24161994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2417
2418 * Makefile.in (removenullpaths, paths-force):
2419 Use name paths.h.tmp$$, which depends on the pid.
2420
24211994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2422
2423 * Makefile.in (removenullpaths, paths-force):
2424 Put paths.h.tmp in top-level dir, not in src.
2425
24261994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2427
2428 * Version 19.27 released.
2429
24301994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2431
2432 * Version 19.26 released.
2433
24341994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2435
2436 * configure.in: Check for lrand48, not rand48.
2437
24381994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2439
2440 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2441 (powerpc-ibm-aix*): New aliases.
2442
24431994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2444
2445 * make-dist (src/m, src/s): Put *.inp in distribution.
2446
24471994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2448
2449 * configure.in: Accept i586 and i486 along with i386.
2450
24511994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2452
2453 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2454 even if CPP env var was set by the user.
2455
2456 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2457
24581994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2459
2460 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2461
24621994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2463
2464 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2465
24661994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2467
2468 * configure.in: Check more specifically for i*86-sun-sunos.
2469
24701994-08-03 Caveh Jalali (caveh@eng.sun.com)
2471
2472 * configure.in: Handle solaris 2.4.
2473
24741994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2475
2476 * configure.in (rand48): Check for it.
2477
24781994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2479
2480 * make-dist: Update the info files.
2481
24821994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2483
2484 * configure.in: Make "checking..." messages' style consistent.
2485 (HAVE_H_ERRNO): New test.
2486
24871994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2488
2489 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2490
24911994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2492
2493 * configure.in (CFLAGS): If the envvar was specified, use that.
2494 And set REAL_CFLAGS from it too.
2495
24961994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2497
2498 * make-dist: Update finder-inf.el.
2499
25001994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2501
2502 * make-dist (msdos): Include sed4.inp in dist.
2503
2504 * Makefile.in (libsrc_libs): Var deleted.
2505
25061994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2507
2508 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2509
25101994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2511
2512 * configure.in (mips-sony-newsos4*): New alias.
2513
25141994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2515
2516 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2517 (*-convex-convexos*): Accept this as alias.
2518
25191994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2520
2521 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2522 for two different uses.
2523
25241994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2525
2526 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2527
25281994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2529
2530 * make-dist: Put ./BUGS into the distrib.
2531
25321994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2533
2534 * configure.in: Handle 386 running Solaris 2.
2535
25361994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2537
2538 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2539
25401994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2541
2542 * configure.in (mips-sony-newsos*): Use news-risc.h.
2543
2544 * configure.in: Accept bsdi as opsys, like bsd386.
2545
25461994-06-01 Morten Welinder (terra@diku.dk)
2547
2548 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2549
25501994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2551
2552 * Version 19.25 released.
2553
2554 * make-dist (shortversion): Don't assume another period follows.
2555
25561994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2557
2558 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2559 (uninstall): Use /bin/pwd.
2560
2561 * Makefile.in (blessmail): Depend on src.
2562 (all): Don't depend on blessmail.
2563
2564 * Makefile.in (src/paths.h): Don't force recomputation.
2565 (paths-force): New target; force recomputation of paths.h.
2566 (all): Depend on paths-force.
2567 (src, lib-src): Depend on src/paths.h.
2568
2569 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2570 NON_GCC_TEST_OPTIONS.
2571
25721994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2573
2574 * configure.in: Don't insist on subversions for irix.
2575
25761994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2577
2578 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2579
2580 * configure.in (i[34]86-next-*): New alternative.
2581
25821994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2583
2584 * Version 19.24 released.
2585
2586 * configure.in: New config hppa*-hp-hpux9shr*.
2587
25881994-05-22 Morten Welinder (terra@tyr.diku.dk)
2589
2590 * config.bat: Doc fix.
2591
25921994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2593
2594 * Makefile.in (mostlyclean, clean, distclean, realclean)
2595 (extraclean): Don't act on man subdir if it doesn't exist.
2596
25971994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2598
2599 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2600 Use them to set up CC.
2601 (*-sun-sunos4.1.3): Set them.
2602
26031994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2604
2605 * Makefile.in (lib-src): Don't depend on src/paths.h.
2606
26071994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2608
2609 * build-ins.in (copydests): Get rid of spurious `-'s.
2610
2611 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2612
26131994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2614
2615 * Version 19.23 released.
2616
2617 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2618 for the Xlib and Xt checks; then restore old CFLAGS.
2619
26201994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2621
2622 * configure.in (HAVE_X11XTR6): Add newline before #if.
2623 Add newline after #endif.
2624
26251994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2626
2627 * configure.in (HAVE_X11XTR6): Arrange to define it.
2628
26291994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2630
2631 * Makefile.in (install): Depend on blessmail.
2632
26331994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2634
2635 * configure.in (mips-siemens-sysv*): Put quotes around value
2636 containing blanks.
2637
26381994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2639
2640 * Makefile.in (TAGS): Use the makefile in src subdir.
2641
26421994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2643
2644 * configure.in (opsys): Recognize `gnu'.
2645
26461994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2647
2648 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2649
26501994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2651
2652 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2653 version > 1.8.
2654
26551994-05-08 Morten Welinder (terra@diku.dk)
2656
2657 * config.bat: Forcibly remove "# " style comments from makefiles.
2658
26591994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2660
2661 * Makefile.in (uninstall): When processing lispdir and etcdir,
2662 do nothing unless it exists and is a directory.
2663
26641994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2665
2666 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2667 Merge code in from install-doc.
2668 (install-doc): Merge code back into install-arch-indep.
2669 (install-arch-dep): Don't depend on install-doc.
2670
2671 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2672
26731994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2674
2675 * configure.in (making src/Makefile and lib-src/Makefile):
2676 Split off the autoconf substitutions and don't pass them thru cpp.
2677 (undefs): Use $canonical as well as $configuration.
2678
2679 * make-dist: Distribute lisp/Makefile.
2680
2681 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2682 Use lower case names for the s files.
2683
26841994-05-03 Morten Welinder (terra@diku.dk)
2685
2686 * config.bat: Added possibility for different file name
2687 transscriptions in lib-src.
2688
26891994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2690
2691 * Makefile.in (lib-src): Undo previous change.
2692 (blessmail): New target to run maybe-blessmail in lib-src.
2693 (all): Depend on blessmail.
2694
2695 * Makefile.in (lib-src): Depend on src.
2696
26971994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2698
2699 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2700 (m88k-dg-dgux5.4R2): dgux5.4R2.
2701
27021994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2703
2704 * configure.in (window_system): Restore accidentally deleted code
2705 that uses AC_FIND_X.
2706
2707 * make-dist: Distribute config.bat.
2708
27091994-04-29 Morten Welinder (terra@diku.dk)
2710
2711 * config.bat: Corrected the configuration of lib-src
2712 to keep up with configure. Add note about dos version 3
2713 or better needed (djgpp needs that). Add note explaining
2714 that either install in c:/emacs or edit the script.
2715 Don't change to c:/emacs, but assume we're there (to minimize
2716 the number of places to change).
2717
2718 * config.bat: Build-in the first step towards X11 support with
2719 the X11 emulator that exists. At this time it won't work,
2720 and several files are missing.
2721
27221994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2723
2724 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2725 Don't look for -lresolv.
2726
2727 * Makefile.in (lib-src): Depend on src/paths.h.
2728
27291994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2730
2731 * configure.in: Restore deleted AC_SUBST of `configuration'.
2732 Improve error message for bad --with-x-toolkit value.
2733
2734 * configure.in: Define CONFIGURATION in src/config.h
2735 rather than substituting in src/Makefile.in.
2736
27371994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2738
2739 * Makefile.in (install-doc): New target.
2740 (install-arch-dep): Depend on install-doc.
2741 (mkdir): Create docdir.
2742
27431994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2744
2745 * configure.in: Test for libresolv.a.
2746 Substitute machfile and opsysfile.
2747
27481994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2749
2750 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2751 (install-arch-dep): Install under the name $(EMACS).
2752
27531994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2754
2755 * configure.in (version): Use entire value of emacs-version.
2756 (mips-siemens-sysv*): New alternative.
2757
27581994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2759
2760 * Makefile.in (install-arch-indep): Don't install dired-x*.
2761
27621994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2763
2764 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2765 Fix definition of $undefs.
2766
27671994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2768
2769 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2770
2771 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2772
27731994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2774
2775 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2776
27771994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2778
2779 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2780 and run it thru cpp, as with src/Makefile.in.
2781
2782 * configure.in: Use AC_SET_MAKE.
2783
27841994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2785
2786 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2787
27881994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2789
2790 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2791
2792 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2793 (printing the choices): Make the toolkit message unconditional.
2794 (USE_X_TOOLKIT): Use `none', not `no', if none.
2795 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2796 Get rid of temp file foofoo1.
2797
27981994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2799
2800 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2801
28021994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2803
2804 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2805 (printing the choices): State choice of toolkit.
2806 (libsrc_libs): Recalculate after writing config.h;
2807 then update lib-src/Makefile.
2808
28091994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2810
2811 * configure.in: Add sunos4shr as alternative for suns.
2812 Conditionals testing for null $CC were backwards.
2813
28141994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2815
2816 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2817
28181994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2819
2820 * configure.in: Handle -isc4.0*.
2821
28221994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2823
2824 * configure.in (esix5): Set NON_GNU_CPP.
2825
28261994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2827
2828 * Makefile.in (thisdir): Nonsensical variable removed.
2829 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2830 back to $thisdir, rather than the directory `this_dir'.
2831
28321994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2833
2834 * Makefile.in (install-arch-indep): Add missing backslash after a
2835 `then'.
2836
28371994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2838
2839 * Makefile.in (thisdir): New variable.
2840 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2841
28421994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2843
2844 * configure.in: Add freebsd.
2845
28461994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2847
2848 * configure.in: Check for fpathconf.
2849
28501994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2851
2852 * configure.in (with_x_toolkit): Fix typo in previous change.
2853
28541994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2855
2856 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
2857
28581994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2859
2860 * configure.in (with_x_toolkit): Don't allow motif or open-look.
2861
28621994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2863
2864 * configure.in: Fix value of docdir.
2865 * Makefile.in (install-arch-indep): Install DOC* in docdir.
2866
28671994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2868
2869 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
2870
28711994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
2872
2873 * configure.in: New variable docdir to control where the docstring
2874 file goes.
2875 Makefile.in: Use it to initialize PATH_DOC in paths.h.
2876
28771994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2878
2879 * configure.in: When --run-in-place, don't inherit archlibdir.
2880
28811994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2882
2883 * Makefile.in (install-arch-dep, install-arch-indep):
2884 New targets split up former do-install rule.
2885 (do-install): Target deleted.
2886
28871994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2888
2889 * configure.in (mips-sony-newsos*): New configuration.
2890
28911994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
2892
2893 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
2894
28951994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2896
2897 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
2898
28991994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2900
2901 * configure.in: Don't initialize CC.
2902
29031994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2904
2905 * configure.in (creating src/Makefile): Also generate -U switches
2906 for symbols in the $configuration value.
2907
2908 * configure.in: Check for sys_siglist being declared in system header.
2909
29101994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2911
2912 * configure.in (creating src/Makefile): Delete blank lines
2913 along with lines of whitespace.
2914 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
2915
29161994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2917
2918 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
2919 like C_SWITCH_SYSTEM.
2920 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
2921
29221994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2923
2924 * configure.in (drem): Check for this function.
2925
29261994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2927
2928 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
2929 If CPP was inherited from environment, don't use NON_GNU_CPP.
2930 (NON_GNU_CC): Likewise.
2931 (handling with_gcc): Use explicit if in the `no' case.
2932 (cc_specified): New variable; if set, don't use NON_GNU_CC.
2933
29341994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2935
2936 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
2937
29381994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2939
2940 * configure.in: Check whether fmod exists.
2941
29421994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2943
2944 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
2945 {src,lisp}/OChangeLog.
2946
29471994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2948
2949 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
2950 necessary for proper operation. This code works with the current
2951 released version of Autoconf.
2952
29531994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2954
2955 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
2956 (USE_X_TOOLKIT): Define it for all values except `no'.
2957
2958 * configure.in: Undo first Jan 8 change and Jan 16 change.
2959
29601994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2961
2962 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
2963 Substitute USE_X_TOOLKIT as both C macro and Make variable.
2964
2965 * Makefile.in (lwlib/Makefile): New target.
2966 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
2967 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
2968 (unlock, relock): Handle lwlib subdir.
2969
2970 * Makefile.in: Add some .PHONY targets.
2971
2972 * make-dist: Handle lwlib subdir like oldXMenu subdir.
2973
2974 * lwlib: New subdirectory.
2975
29761994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2977
2978 * configure.in: If CPP has a value that is a directory,
2979 discard the value.
2980
29811994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2982
2983 * configure.in (srcdir_undefs): Add g flag to sed substitution to
2984 remove -U[0-9]*.
2985
29861994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2987
2988 * Makefile.in (do-install): Install the dired-x info files.
2989
2990 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
2991 (See src/s/sol2.h.)
2992
29931994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2994
2995 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
2996
29971994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2998
2999 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3000 AC_OUTPUT as it should be; hopefully noone will again see fit to
3001 gratuitously break this and not make a change log entry.
3002 Optimized sed processing of Makefile.in and cpp output; now
3003 preserves comments previously removed from the cpp input.
3004 Eliminated temp file for cpp output. Generate -U switches to
3005 undefine all identifiers that appear in the directory name
3006 ${srcdir}; pass these to cpp.
3007
3008 * configure.in (version): Fix sed regexp to match two-elt version
3009 number.
3010
3011 * configure.in: Check for strerror.
3012
30131994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3014
3015 * configure.in: Test for bcmp.
3016
30171994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3018
3019 * make-dist (tempdir): Put subdir msdos into the distribution.
3020
30211993-01-07 Morten Welinder (terra@diku.dk)
3022
3023 * config.bat: New file.
3024
30251994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3026
3027 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3028
30291994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3030
3031 * configure.in (m68*-next-*): Don't care about which os is specified.
3032 (i[34]86-*-*): Check for *-nextstop*.
3033
30341993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3035
3036 * configure.in: Check for setsid.
3037
30381993-12-17 Richard Stallman (rms@srarc2)
3039
3040 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3041
30421993-12-15 Richard Stallman (rms@srarc2)
3043
3044 * Makefile.in (mkdir): Make only the lockdir writable.
3045
3046 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3047
30481993-12-11 Richard Stallman (rms@srarc2)
3049
3050 * Makefile.in (libdir): Use @libdir@.
3051
30521993-12-08 Richard Stallman (rms@srarc2)
3053
3054 * Makefile.in (install): Add empty command.
3055
30561993-12-04 Richard Stallman (rms@srarc2)
3057
3058 * make-dist: Put man/getopt.c in the dist.
3059
3060 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3061
3062 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3063
30641993-12-03 Richard Stallman (rms@srarc2)
3065
3066 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3067 Set it for all solaris versions.
3068 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3069 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3070 Likewise for NON_GNU_CC and CC.
3071
30721993-12-01 Richard Stallman (rms@srarc2)
3073
3074 * configure.in (mips-mips-riscos4*): Assign variable CC.
3075 (checking ${with_gcc}): If "no", don't override CC if already set.
3076 (CC): Initialize it as empty.
3077
30781993-11-30 Richard Stallman (rms at srarc2)
3079
3080 * configure.in (Suns): Set CPP if *-solaris2.3*.
3081
30821993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3083
3084 * Version 19.22 released.
3085
3086 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3087
30881993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3089
3090 * make-dist: When breaking links, use cp -p.
3091 Copy install.sh into distribution.
3092 Move the temp dir up into the parent dir;
3093 don't leave the staging dir make-dist.tmp... in existence.
3094 * install.sh: New file.
3095
30961993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3097
3098 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3099
31001993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3101
3102 * configure.in (version): When --run-in-place, exclude
3103 ${datadir}/emacs/site-lisp from locallisppath.
3104
31051993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3106
3107 * configure.in: Delete jumk.c before writing it.
3108
31091993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3110
3111 * Version 19.21 released.
3112
3113 * Makefile.in (mkdir): Ignore error from chmod.
3114
31151993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3116
3117 * make-dist: Don't put lisp/forms.README in the distribution.
3118
31191993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3120
3121 * configure.in (creating src/Makefile): Before running cpp,
3122 discard all lines that start with `# Generated' or /**/#.
3123
31241993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3125
3126 * Version 19.20 released.
3127
3128 * make-dist: Use build-ins.in, not build-install.in.
3129 Don't bother updating TAGS since it's not included.
3130
3131 * build-ins.in: Renamed from build-install.in.
3132
31331993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3134
3135 * make-dist: Don't try to link *.texinfo--there are none now.
3136 When running make in lib-src, specify YACC var value.
3137
31381993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3139
3140 * configure.in (extrasub): Add vpath patterns for %.[yls].
3141
3142 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3143 Instead just include the commands to make src/Makefile as the
3144 second arg to AC_OUTPUT.
3145
3146 * configure.in: Use : instead of dnl for comment inside
3147 $makefile_command.
3148
3149 * configure.in: No longer use vpath_sed. Instead, when we notice
3150 srcdir already configured, set extrasub to hack vpath in the
3151 makefiles.
3152
3153 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3154 before moving it.
3155 * Makefile.in (VPATH): Define to @srcdir@.
3156
31571993-09-28 Brian Fox (bfox@cubit)
3158
3159 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3160 doesn't exist. Just copy src/Makefile.in instead. Touch
3161 all of the Makefiles after editing config.status.
3162
3163 * INSTALL: Update documentation to match new configuration
3164 mechanism.
3165
31661993-09-27 Brian Fox (bfox@ai.mit.edu)
3167
3168 * configure.in: Allow any of the path or directory Makefile
3169 variables to be set with flags to configure. Create all Makefiles
3170 at configure time. Edit special commands into config.status after
3171 src/Makefile.in is built from src/Makefile.
3172
3173 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3174 If these files are out of date, simply have config.status
3175 rebuild them; don't rebuild them explicitly.
3176
31771993-09-25 Brian Fox (bfox@ai.mit.edu)
3178
3179 * build-install.in: Change src/xemacs to src/emacs. We no longer
3180 create src/xemacs, so the file wouldn't be found.
3181
3182 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3183
31841993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3185
3186 * configure.in: Avoid forcing the search of /usr/include before
3187 fixed include files by resetting C_SWITCH_X_SITE if it is
3188 "-I/usr/include".
3189
31901993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3191
3192 * Makefile.in (@rip_paths@locallisppath):
3193 Delete ${datadir}/emacs/site-lisp.
3194
31951993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3196
3197 * configure.in:
3198 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3199 Remove ${extra_output} from AC_OUTPUT call.
3200
32011993-09-17 Brian Fox (bfox@inferno)
3202
3203 * make-dist: Quote backquotes found in strings to be echoed.
3204
3205 * configure.in: Use "sh -c pwd" when we want to avoid having the
3206 shell fix up the value of $PWD.
3207
32081993-09-13 Brian Fox (bfox@inferno)
3209
3210 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3211 of the installation fail. Suggested by Karl Berry.
3212
32131993-08-30 Brian Fox (bfox@inferno)
3214
3215 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3216 was used. Set MAKEFLAGS from MFLAGS.
3217
32181993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3219
3220 * configure.in: Test for res_init in libc.
3221
32221993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3223
3224 * configure.in: In the file ${tempcname}, use configure___
3225 instead of @configure@.
3226
32271993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3228
3229 * make-dist: Dist vpath.sed
3230
3231 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3232 Depend on vpath.sed.
3233 Replace sed comand for VPATH with @vpath_sed@.
3234
3235 * configure.in: Substitute variable `vpath_sed'.
3236 If not in $srcdir and $srcdir is configured,
3237 issue warning that GNU make is required,
3238 and set vpath_sed to use vpath.sed script.
3239
32401993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3241
3242 * configure.in: Remove check for $srcdir being configured. This
3243 pretty much works now.
3244 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3245 Check for XFree86 (/usr/X386/include) independent of whether
3246 -lXbsd exists.
3247
3248 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3249 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3250 `make'.
3251
32521993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3253
3254 * Version 19.19 released.
3255
3256 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3257
32581993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3259
3260 * configure.in: Check for XScreenNumberOfScreen.
3261
32621993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3263
3264 * configure.in: Add * to end of all configuration alternatives.
3265 (m68*-sony-newsos3*): New alternative.
3266
32671993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3268
3269 * make-dist: Include getdate.c in distribution.
3270
3271 * configure.in: For --help, use $PAGER if it is set.
3272 (LIB_X11_LIB): Default to -lX11.
3273 (mips-sgi-irix5.*): New alternative.
3274
3275 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3276
3277 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3278 Recognize *.B8.* as hpux version 8.
3279 (m68*-tektronix-bsd*): Fix typo in tek4300.
3280 (AC_HAVE_FUNCS): Add ftime.
3281
32821993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3283
3284 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3285 Use tekxd88, not tekXD88.
3286
32871993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3288
3289 * configure.in: Check for -lm. Then can check for frexp and logb.
3290
32911993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3292
3293 * Version 19.18 released.
3294
3295 * make-dist (src): Don't put gnu-hp300 in dist.
3296 (src, lisp): Include OChangeLog in dist.
3297
32981993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3299
3300 * configure.in: Test for presence of logb and frexp functions.
3301
33021993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3303
3304 * configure.in (machine): Add i370-ibm-aix*.
3305
33061993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3307
3308 * configure.in (function checks): Test for mkdir and rmdir.
3309
3310 * configure.in (function checks): Don't test for random and bcopy
3311 only when we're building with X; look for them all the time.
3312
33131993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3314
3315 * configure.in: Test for availability of bcopy functions, searching
3316 the X libraries if we're using X.
3317
3318 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3319 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3320 versions of AIX, and needs to be passed to the loader.
3321
3322 * configure.in: Test for the availablility of the
3323 XScreenResourceString function.
3324
33251993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3326
3327 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3328 LD_SWITCH_X_SITE and assume --with-x11.
3329 Only look for X11 files if we weren't told about a window system
3330 or if we were told to use X11 but not told where.
3331 Search the libraries from the s and/or m files when checking for
3332 functions.
3333
3334 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3335
33361993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3337
3338 * make-dist: Include lisp/dired.todo in the distribution.
3339
33401993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3341
3342 * configure.in: Add code to set HAVE_INET_SOCKETS.
3343
33441993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3345
3346 * configure.in: If we do find x_includes and x_libraries
3347 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3348
33491993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3350
3351 * make-dist: Include src/gnu-hp300 in the dist.
3352
3353 * configure.in (canonical): New variable holds the canonicalized
3354 configuration. Don't alter `configuration'. Use `configuration'
3355 for Makefile.in for file naming.
3356 (testing x_includes and x_libraries): Use =, not ==.
3357
33581993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3359
3360 * Version 19.17 released.
3361
3362 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3363 directory's makefile. This allows the invocation of CPP which
3364 builds xmakefile to receive these switches. The SunSoft C
3365 preprocessor inserts spaces between tokens if it doesn't get the
3366 -Xs flag requested in src/s/sol2.h.
3367
33681993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3369
3370 * configure.in (m68k-bull-sysv3): new config.
3371
33721993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3373
3374 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3375 the X Windows libraries.
3376
33771993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3378
3379 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3380 the distribution. Those files aren't kept in their own
3381 subdirectory any more.
3382
33831993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3384
3385 * Version 19.16 released.
3386
33871993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3388
3389 * configure.in: Add --verbose flag.
3390
33911993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3392
3393 * version 19.15 released.
3394
33951993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3396
3397 * Makefile.in (top_distclean): Use -f switch when cleaning out
3398 lock dir; it might be empty.
3399
3400 * configure.in: Only check for -lXbsd once.
3401
34021993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3403
3404 * Version 19.14 released.
3405
34061993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3407
3408 * make-dist: If using gzip, create distribution with '.gz' extension.
3409
3410 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3411 (lisp/forms-mode): This doesn't exist anymore.
3412
3413 * configure.in: Look for the closedir function.
3414
34151993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3416
3417 * configure.in (CPP): Autoconf sets this to a shell variable
3418 reference, which doesn't work when it's edited into a makefile.
3419 Expand that variable reference.
3420
3421 * Makefile.in (CPP): New variable.
3422 (src/Makefile): Edit CPP into src/Makefile.
3423
3424 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3425 and entering double quotes to get the values of LD_SWITCH_X_SITE
3426 and the other make variables; make substitutes them in anyway.
3427
3428 * Makefile.in (uninstall): Don't remove the lisp and etc
3429 directories if they're in the source tree.
3430
3431 Bring mumbleclean targets into conformance with GNU coding standards.
3432 * Makefile.in (mostlyclean, clean): Separate these two; just have
3433 them pass the request to the subdirectory makefiles.
3434 (distclean): Pass the request down, and then get rid of the
3435 files configure built, and get rid of the Makefiles.
3436 (realclean): Pass the request down, and then do the same things
3437 distclean does.
3438 (uninstall, info, dvi): New targets.
3439
3440 * configure.in: Move clause for PC-compatible i386 box to the end
3441 of the case statement, to avoid masking configurations below.
3442
3443 * configure.in: Add case for m88k-motorola-sysv4.
3444
3445 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3446 the HP 68000 machines.
3447
3448 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3449 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3450 preprocessor won't fiddle with them.
3451
34521993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3453
3454 * Makefile.in (TAGS): cd to src to run etags.
3455
34561993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3457
3458 * configure.in (version): Check the X libraries for XrmSetDatabase
3459 and random, and see if we have -lXbsd.
3460
34611993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3462
3463 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3464 s/*.h and m/*.h files. Martin Tomes
3465 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3466
34671993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3468
3469 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3470 above the general i386 alternative.
3471
34721993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3473
3474 * configure.in: Recognize configuration name for Data General
3475 AViiON machines.
3476
3477 * configure.in: Use AC_LONG_FILE_NAMES.
3478
34791993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3480
3481 * configure.in: Test for bison.
3482 * Makefile.in (YACC): New variable.
3483 (lib-src/Makefile.in): Edit YACC into the makefile.
3484
34851993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3486
3487 * Version 19.13 released.
3488
3489 * configure.in (CFLAGS): Don't set this according to the value of
3490 the GCC shell variable. Instead, consult the machine and system
3491 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3492 test __GNUC__ while we're at it.
3493
3494 * configure.in: Remove extra ;; from hpux cases.
3495
34961993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3497
3498 * configure.in: Check to see if the system has -ldnet.
3499
35001993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3501
3502 * make-dist: Add clauses to distribute lisp/forms-mode.
3503
35041993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3505
3506 * configure.in (machine): Fix the versions in hpux version number test.
3507 Do not guess based on cpu type. Do check for explicit system version.
3508
35091993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3510
3511 * configure.in: Do NOT look for `unknown' as company name.
3512
35131993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3514
3515 * configure.in: Fix typo in message.
3516
35171993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3518
3519 * Version 19.12 released.
3520
3521 * Makefile.in (do-install): Correct previous etc-copying change.
3522 Partially rewrite using `if'.
3523 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3524
3525 * Version 19.11 released.
3526
3527 * configure.in: Handle 386bsd.
3528
35291993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3530
3531 * make-dist: Update getdate.c.
3532
3533 * configure.in: Handle bsd386.
3534
3535 * Makefile.in (do-install): Use `-' in tar options.
3536
3537 * configure.in: Change ! "${...}" to x"${...}" = x.
3538
3539 * Makefile.in (do-install): Copy the DOC-* files from the build
3540 etc directory, as well as lots of things from ${srcdir}/etc.
3541
3542 * make-dist: Copy config.guess.
3543
3544 * configure.in: Handle AIX versions 1.2, 1.3.
3545
35461993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3547
3548 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3549 the configuration name mips-mips-usg* to represent USG systems.
3550
3551 * configure.in: Fix logic to detect if srcdir is already configured.
3552
3553 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3554
3555 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3556 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3557 of a directory; cd might fail, and have pwd print out the current
3558 directory.
3559
35601993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3561
3562 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3563
35641993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3565
3566 * configure.in: Complain if srcdir points at an already-configured
3567 tree.
3568
35691993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3570
3571 * Version 19.10 released.
3572
35731993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3574
3575 * Makefile.in: Use Makefile comments, not C comments.
3576
3577 * configure.in: Add case for the Tektronix XD88.
3578
35791993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3580
3581 * configure.in: Handle sysv4.2 and sysvr4.2.
3582
35831993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3584
3585 * configure.in: Traverse the argument list without destroying it;
3586 don't use shift. It turns out that "set - ${saved_arguments}"
3587 doesn't work portably.
3588
3589 * configure.in: Add missing "fi".
3590
3591 * make-dist: Rebuild configure if configure.in is newer.
3592
3593 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3594 targets to be executed even if make remembers that it has already
3595 stisfied FRC.
3596
35971993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3598
3599 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3600
3601 * configure.in (romp): Handle various version numbers with aos and bsd.
3602
36031993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3604
3605 * configure.in: Fix message text.
3606
36071993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3608
3609 * make-dist: Make a `site-lisp' directory in the distribution,
3610 instead of a `local-lisp' directory, which hasn't been the
3611 appropriate name for a long time.
3612 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3613 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3614
3615 * Makefile.in (do-install): Correctly detect if ./etc and
3616 ${srcdir}/etc are the same.
3617
3618 * configure.in: Extract UNEXEC from the system configuration
3619 files, compute the name of the source file corresponding to the
3620 object file, and #define it as UNEXEC_SRC in config.h.
3621
3622 * configure.in: If srcdir is '.', then try using PWD to make it
3623 absolute.
3624
3625 * configure.in: Include ${srcdir} in the printed report, to help
3626 people notice if it's an automounter path.
3627
36281993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3629
3630 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3631
36321993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3633
3634 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3635 when they are different. Add `shift' command.
3636 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3637 (externallispdir): Var deleted.
3638
3639 * configure.in: Delete spurious paren outputting short_usage.
3640
36411993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3642
3643 * Version 19.9 released.
3644
36451993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3646
3647 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3648 subdirectory makes.
3649
3650 * make-dist: Check for .elc files with no corresponding .el file.
3651
3652 * Makefile.in (mkdir): Make all the directories in locallisppath.
3653
3654 * config.guess: New file.
3655 * configure.in: Use it, tentatively.
3656 * INSTNALL: Mention its usage.
3657
3658 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3659 the former gives you the operating system rev directly. Use
3660 s/hpux.h if we don't recognize what we got.
3661
3662 * Makefile.in (do-install): Don't remove a destination directory
3663 if it's the same as the source. If ${srcdir}/info == ${infodir},
3664 don't try to copy the info files.
3665
3666 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3667 doesn't work if you're not using a separate source directory.
3668 (do-install): Copy the build tree's etc directory only after
3669 making sure it's not also the source tree's etc directory.
3670
36711993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3672
3673 * configure.in: Handle sunos4.1.3 specially.
3674
36751993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3676
3677 * Makefile.in (INSTALL): Add definition.
3678
3679 * configure.in: Fix some messages. Support -with-gnu-cc.
3680 At the end, use `set --', not `set -'.
3681 Delete spurious `.h' in hpux alternatives.
3682
36831993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3684
3685 * Version 19.8 released.
3686
36871993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3688
3689 * configure.in: When looking for source in the same directory as
3690 the configure script, make the path thus discovered absolute.
3691 If the user specifies the `--srcdir' switch, make that directory
3692 absolute too.
3693
3694 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3695
3696 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3697 too, as the value of the PATH_INFO macro.
3698
3699 * configure.in: Check to see if the source lives in the same
3700 directory as the configure script.
3701
37021993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3703
3704 * Makefile.in (install): Split this into `install' and
3705 `do-install', to give people more control over exactly what gets
3706 done.
3707 (do-install): New target, containing the guts of `install'. Don't
3708 remove and recreate the directories inside the copying loop - do
3709 it all before the copying loop. Pass more flags to the lib-src
3710 make.
3711 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3712 avoid errors and warnings.
3713
3714 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3715 the manufacturer - the more general case was blocking other i386
3716 configuration names below, and that's how the names are written in
3717 MACHINES anyway.
3718
3719 * make-dist: When breaking links, remove the link before moving
3720 the copy onto it, to avoid interactive behavior.
3721
3722 * Makefile.in: Doc fix.
3723
3724 * configure.in: Doc fix.
3725
3726 * INSTALL: Mention --exec-prefix option.
3727
3728 * configure.in: Add support for the `--exec-prefix' option.
3729 * Makefile.in: Accept that support.
3730
3731 * configure.in: Use the AC_PROG_INSTALL macro.
3732 * Makefile.in (INSTALL): Variable removed.
3733 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3734
3735 * configure.in: Distinguish between hp800's and hp700's by calling
3736 "uname -m".
3737
37381993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3739
3740 * configure.in: Recognize configuration names for i860 boxes
3741 running SYSV.
3742
37431993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3744
3745 * configure.in: Distinguish between hp800's and hp700's by the
3746 version of HP/UX they run, since that's something people are more
3747 likely to know - hp700's run 8.0.
3748 Add HP 700 configuration.
3749
3750 * configure.in: Test for the presence of the `rename' function.
3751
3752 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3753 configure.in.
3754 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3755
3756 * make-dist: Break intra-tree links.
3757
3758 * configure.in: Explain that this is an autoconf script, and give
3759 instructions for rebuilding configure from it. Arrange to put
3760 comments in configure explaining this too.
3761
3762 * configure.in: Make the first line of the configure script be
3763 "#!/bin/sh". Leaving the first line blank didn't work.
3764
3765 * configure.in (long_usage): Removed; made short_usage describe
3766 the options briefly.
3767
3768 * configure.in: Implement the --prefix option.
3769 * Makefile.in (prefix): Add support for it here.
3770 * INSTALL: Document it here.
3771
3772 * Makefile.in (install): Don't assume that the files in the `info'
3773 subdirectory match *.info. They don't have that prefix.
3774
37751993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3776
3777 * configure.in: Add case for version 5 of Esix.
3778
37791993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3780
3781 * Version 19.7 released.
3782
3783 * make-dist: There aren't any *.com files in lib-src anymore.
3784
3785 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3786 them; they're symlinks to other filesystems on the GNU machines.
3787
3788 * make-dist: Check that the manual reflects the same version of
3789 Emacs as stated in lisp/version.el. Edit that version number into
3790 the README file.
3791
37921993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3793
3794 * configure.in: Remove the hack of AC_DEFINE; use
3795 AC_DEFINE_UNQUOTED.
3796
37971993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3798
3799 * make-dist: Don't distribute precomp.com, compile.com, or
3800 link.com from ./src; they're in ./vms now.
3801
3802 Some time-handling patches from Paul Eggert:
3803 * configure.in: Add AC_TIMEZONE.
3804
38051993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3806
3807 * configure.in: Recognize Linux as a valid operating system for
3808 the i386.
3809
38101993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3811
3812 * make-dist: Distribute some VMS files we got from Richard Levitte.
3813
3814 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3815 the source for the sed command, not oldXMenu/Makefile.
3816
38171993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3818
3819 * INSTALL: Don't claim the srcdir option doesn't work.
3820
38211993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3822
3823 * configure.in: Include remarks saying what order the autoconf
3824 tests should go in, and remind people to change config.h.in
3825 whenever they add autoconf tests which make #definitions.
3826
3827 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3828
38291993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3830
3831 * Makefile.in (oldXMenu/Makefile): Make this depend on
3832 ${srcdir}/oldXMenu/Makefile.in, not itself.
3833
3834 * PROBLEMS: Some updates from David J. Mackenzie.
3835
3836 More changes from David J. Mackenzie.
3837 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3838 removed; autoconf and config.h should specify all these
3839 differences.
3840 (buildlisppath): Make this path depend on ${srcdir}.
3841 (INSTALLFLAGS): Removed.
3842 (INSTALL): Include the -c flag.
3843 (install): Change the way we invoke install accordingly.
3844
3845 Install ${srcdir} changes from DJM.
3846 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3847 list.
3848 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3849 the source tree and the etc directory in the object tree.
3850 (${SUBDIR}): Pass the prefix variable down to submakes.
3851 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
3852 in /bin.
3853 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
3854 values for srcdir and VPATH.
3855 (install): Add `v' flag to tar command. Make sure that `dir'
3856 exists in ${srcdir}/info before copying it. Remember that the man
3857 pages come from the source tree, not the object tree.
3858 * configure.in: Remove remarks saying that the --srcdir option
3859 doesn't work.
3860 Create the etc directory in the object tree.
3861 Recognize configuration names of the form *-sun-solaris*.
3862 Recognize sunos5 and solaris as operating system names.
3863
3864 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
3865 lib-src/getdate.y and src/systime.h.
3866
38671993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3868
3869 * make-dist: Make links in info subdir.
3870
38711993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3872
3873 * configure.in: Call AC_STDC_HEADERS.
3874
38751993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3876
3877 * configure.in: Sidestep autoconf's quoting of the second argument
3878 of AC_DEFINE, so we can specify the value to put there. It would
3879 be nice if autoconf provided some way to specify computed values
3880 for macros.
3881
38821993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3883
3884 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
3885 this is always just -DHAVE_CONFIG_H.
3886
3887 The GNU coding standards specify that CFLAGS should be left for
3888 users to set.
3889 * Makefile.in (CFLAGS): Let configure determine the default value
3890 for this. Don't
3891 have it default to DEFS.
3892 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
3893 (lib-src/Makefile, src/Makefile): Edit the default value for
3894 CFLAGS into these files, not DEFS.
3895 * configure.in (CFLAGS): Choose a default value for this - "-g"
3896 normally, or "-g -O" if we're using GCC. Edit it into the
3897 top-level Makefile.
3898
3899 * configure.in: When scanning the machine and system description
3900 #include files, write their names to conftest.c properly.
3901
39021993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3903
3904 * configure.in: In configuration name case for Apallos running
3905 Domainios, set opsys, not opsysfile.
3906
3907 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
3908 src/config.h, instead of AC_OUTPUT; the latter overwrites
3909 src/config.h even when it hasn't changed, puts a makefile-style
3910 comment at the top even though it's C code, and produces a
3911 config.status script which doesn't do the job right.
3912
3913 * configure.in: Add AC_LN_S test, so we can tell whether or not we
3914 can use a symbolic link to get the X Menu library into src.
3915 * Makefile.in (LN_S): New variable.
3916 (src/Makefile): Edit the value of LN_S into this makefile.
3917
39181993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3919
3920 * configure.in: Support *-sco3.2v4* as opsystem.
3921
3922 * make-dist: Don't include calc directory.
3923 Exclude many files in the man directory; copy a few.
3924
39251993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3926
3927 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
3928 call AC_STRUCT_TM to see what's in time.h.
3929
3930 * configure.in: Employ quoting stupidity to get the value of CPP
3931 to expand properly.
3932
39331993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3934
3935 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
3936 variable to scan the machine and system description files.
3937
3938 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
3939 so that getdate.y builds correctly.
3940
39411993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3942
3943 * configure.in (tempcname): Change this to "conftest.c", so it will
3944 work properly on systems with short filenames; this is the name
3945 autoconf uses.
3946
3947 * configure.in: Also detect the availability of dup2 and
3948 gethostname.
3949
3950 * configure.in: Use the AC_ALLOCA test.
3951 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
3952 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
3953
39541993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3955
3956 * make-dist: Distribute configure, as well as configure.in.
3957 Oversight.
3958
39591993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3960
3961 * Makefile.in (install): Print out the name of the directory we're
3962 copying, so people can have some idea of whether we're making
3963 progress.
3964
3965 * Makefile.in (install.aix, install.xenix, install.sysv, install):
3966 Don't forget to re-create the COPYDESTS directories after we clear
3967 them out.
3968
39691993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3970
3971 * Makefile.in: Add autoconf cookies so that the configure
3972 script can comment out sections of path variable definitions to
3973 choose between the installable configuration and the run-in-place
3974 configuration.
3975 * configure.in: Add new option `--run-in-place', to select the
3976 run-in-place path definitions.
3977
3978 * configure.in: Add a clause to the big configuration name case
3979 for the NeXT machine.
3980
39811993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3982
3983 * Makefile.in (install, install.sysv, install.xenix, install.aix):
3984 Make sure that each source directory exists, and is different from
3985 the destination directory; then, delete the destination before
3986 copying over the source.
3987
3988 * make-dist: Distribute configure.in, instead of configure.
3989
39901993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3991
3992 * configure.in: Don't set CC to "gcc -O" if the user specifies
3993 `--with-gcc'. Add -O to DEFS if GCC is set.
3994
39951993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3996
3997 * Makefile.in (clean mostlyclean): Missing right paren.
3998
3999 * configure.in: When checking for X windows, search for an X11
4000 subdirectory of ${x_includes}.
4001
4002 * configure.in: Check for gettimeofday function, for getdate.y.
4003
4004 Change `configure' to a mixture of custom code and autoconf stuff.
4005 autoconf can't derive all the information we need, but we'd really
4006 like to be able to take advantage of some of its tests, and its
4007 file-editing facilities.
4008 * configure.in: Renamed from configure.
4009 Quote the sections of shell script we want copied literally to
4010 the configure script.
4011 (compile): Initialize this to make the autoconf macros' code happy.
4012 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4013 code to do their jobs.
4014 Use autoconf to produce Makefile and src/config.h.
4015 Remove the Makefile-style comment that autoconf places at the top
4016 of src/config.h.
4017 (config_h_opts): Removed - no longer necessary.
4018 * Makefile.in (configname): Renamed to configuration.
4019 (CONFIG_CFLAGS): Renamed to DEFS.
4020 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4021 get values via autoload @cookies@.
4022 (libsrc_libs): Get this from autoconf. We used to do nothing
4023 about this.
4024 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4025
4026 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4027 echo the move-if-change command.
4028
40291993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4030
4031 * make-dist: Distribute lib-src/rcs-checkin.
4032
4033 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4034 Don't try to make links to the RCS or Old subdirectories.
4035 Use the appropriate extension for the compression type in use.
4036 Create the tar file in the shell's initial default directory, not
4037 in ${tempparent}.
4038 Erase the whole ${tempparent} tree, not just ${tempdir}.
4039
40401993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4041
4042 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4043 use to build paths.h.
4044 (lib-src/Makefile, src/Makefile): Similarly.
4045
4046 * configure: Extend test for working `const' keyword to handle AIX
4047 3.2 cc.
4048
40491993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4050
4051 * make-dist: Distribute lisp/term/ChangeLog.
4052
4053 Arrange for C compilation throughout the tree to get
4054 C_SWITCH_SYSTEM from the configuration files.
4055 * configure: Extract C_SWITCH_SYSTEM from the machine and
4056 system-dependent files, and save it in the top-level Makefile.
4057 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4058 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4059
4060 * make-dist: Include the VMS support files in oldXMenu in the
4061 distribution.
4062
4063 * configure: Doc fix.
4064
4065 * configure: Fix corrupted config_h_opts.
4066
4067 * configure: Properly report option names in error messages.
4068
4069 * configure: Properly recognize --x-includes and --x-libraries
4070 options.
4071
4072 * configure: Fix syntax errors in code handling XFree386.
4073
40741993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4075
4076 * configure: Add special code to detect XFree386, and tell
4077 config.h about it.
4078
4079 * configure: Properly handle extracting values of LIBS_MACHINE and
4080 LIBS_SYSTEM that contain spaces.
4081
4082 * configure: Add `--x-includes' and `--x-libraries' options. I
4083 think these are dopey, but no less than three alpha testers, at
4084 large sites, have said they have their X files installed in odd
4085 places. Implement them by setting C_SWITCH_X_SITE and
4086 LD_SWITCH_X_SITE in src/config.h.
4087
40881993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4089
4090 * make-dist: Don't distribute etc/Old files.
4091
4092 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4093 backups.
4094
40951993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4096
4097 * make-dist: Fix typo.
4098
40991993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4100
4101 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4102 in some cases where it should but didn't seen to.
4103
4104 * Makefile.in: Added unlock and relock productions.
4105
41061993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4107
4108 * make-dist: Add a --compress option to force make-dist to use
4109 compress.
4110
4111 * make-dist: Use gzip, if we can find it.
4112
4113 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4114 make rs6000-ibm-aix default to -aix32.
4115
41161993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4117
4118 * Makefile.in: Added `Developer's configuration' section.
4119
41201993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4121
4122 * Makefile.in: Add commented-out variable settings for developer's
4123 configuration.
4124
41251993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4126
4127 * make-dist: Distribute `src/bitmaps' too.
4128
41291993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4130
4131 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4132 make rs6000-ibm-aix default to -aix32.
4133
41341993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4135
4136 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4137
4138 * Makefile.in (install.sysv): Add a second `$' in front of
4139 `${dest}', so that the shell will expand it, instead of Make.
4140
4141 * configure: When processing the name of the configure script,
4142 collapse `././' to `./', but leave a single `./' prefix alone.
4143
4144 * configure: Doc fix.
4145
41461993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4147
4148 * configure: Handle isc3.0 correctly.
4149
41501993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4151
4152 * make-dist: Don't try to copy the COPYING notice into
4153 external-lisp; we're not distributing that directory any more.
4154
41551993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4156
4157 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4158 Remove CVS subdirectories from the installed directory trees, as
4159 well as RCS directories.
4160
41611993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4162
4163 * make-dist: Only copy gmalloc.c if we couldn't link it.
4164 Don't try to copy man/{README,Makefile} unless they actually exist.
4165
4166 * Makefile.in (lisppath): Don't include externallispdir in this.
4167 We're not sure whether we're even going to distribute the
4168 directory yet.
4169
41701993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4171
4172 * make-dist: Don't distribute the external-lisp directory anymore.
4173 * INSTALL: Remove all references to external-lisp.
4174
4175 * configure: Detect whether the compiler supports `const'
4176 properly, and edit src/config.h accordingly.
4177
4178 * configure: Tweak layout of final report.
4179
4180 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4181 CFLAGS.
4182
4183 * Makefile.in (locallisppath): Make this default to
4184 ${datadir}/emacs/site-lisp, instead of
4185 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4186 the same thing, and local-lisp causes completion conflicts with
4187 lock.
4188 (lisppath): Add ${externallispdir} to this.
4189 * INSTALL: Adjust installation directions.
4190
4191 * Makefile.in (externallispdir): New variable, to say where to
4192 install the externally-maintained lisp files.
4193 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4194 the others.
4195 * INSTALL: Describe external-lisp and the new externallispdir
4196 variable.
4197
41981993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4199
4200 * configure (progname): New option `--with-gcc'. Make it clearer
4201 how we are trying to guess whether or not we have GCC.
4202 * INSTALL: Document the `--with-gcc' option, and improve
4203 description of `--with-x' options.
4204
42051993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4206
4207 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4208 ${infodir} from these variables; we have written out explicit code
4209 to install the info files.
4210
42111993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4212
4213 * make-dist: Don't distributed the RCS files in the etc directory.
4214
42151993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4216
4217 * Makefile.in: Some makes can't handle comments in the middle of
4218 commands; move them to before the whole rule.
4219
42201993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4221
4222 * README: Mention what Emacs is.
4223
42241993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4225
4226 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4227 Add `./cpp' and `./man' back into the distribution.
4228
42291993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4230
4231 * Makefile.in: Define MAKE, and use where appropriate.
4232
42331993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4234
4235 * make-dist: Remember that the authoritative COPYING notice is
4236 `etc/COPYING', not `../etc/COPYING'.
4237
42381992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4239
4240 * make-dist: Make sure that the COPYING notices in each directory
4241 are copies, not symlinks.
4242
42431992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4244
4245 * INSTALL: The build process produces an executable called `emacs'
4246 now. Change references.
4247 * Makefile.in: Adjust `install.mumble' targets to install
4248 `src/emacs', not `src/xemacs'.
4249
4250 * configure: Start with a blank line; this keeps some old CSH's
4251 from thinking it's a CSH script. Most systems will just use
4252 /bin/sh to run it, which is what we're expecting; the only other
4253 shells which might try to interpret it themselves are probably
4254 Bourne-compatible.
4255
42561992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4257
4258 * INSTALL: Improvements suggested by David Mackenzie.
4259
42601992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4261
4262 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4263 Don't try to copy the info files if there aren't any; the
4264 unexpanded globbing pattern disappoints `install'. Ignore the
4265 return status of that command.
4266
4267 * INSTALL: Updated for new configuration arrangement.
4268
4269 * configure: Don't make the top-level Makefile read-only - people
4270 may want to edit the values of the path variables.
4271
4272 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4273 Install the info files in ${infodir}. Install the executable
4274 under both `emacs' and `emacs-VERSION'.
4275
4276 * Makefile.in: Doc fix.
4277
4278 * Makefile.in (exec_prefix): New variable, as per latest version
4279 of coding standards.
4280 (bindir, libdir): Use it, instead of `prefix'.
4281 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4282
4283 * Makefile.in (mandir): Make the default value for this depend on
4284 $(prefix).
4285
4286 * Makefile.in (datadir, statedir, libdir): Make these all default
4287 to ${prefix}/lib.
4288 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4289 to compensate.
4290
4291 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4292 Install the etags and ctags man pages too.
4293
4294 * Makefile.in (distclean): Don't delete backup files; that's the
4295 job of extraclean.
4296 (extraclean): Like distclean, but deletes backup and autosave files.
4297
42981992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4299
4300 Make path specification conform to GNU coding standards.
4301 * configure (long_usage): Remove all traces of old arguments from
4302 usage messages, and document the options we do accept in more
4303 detail: -with-x... and --srcdir.
4304 (options, boolean_opts): Deleted; we don't have enough options to
4305 make this worthwhile.
4306 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4307 along with the code which supported them; these should be set as
4308 arguments to the top-level make.
4309 (config_h_opts): Since this no longer doubles as a list of option
4310 names, make them upper case; this simplifies the code which uses
4311 them to build the sed command to edit src/config.h. Change the
4312 code which sets them.
4313 (cc, g, O): Don't allow the user to set these using options; they
4314 should be specified using `CC=' and `CFLAGS=' arguments to the
4315 top-level make. Just choose reasonable default values for them,
4316 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4317 values.
4318 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4319 options; use them whenever the configuration files say they're
4320 possible.
4321 Simplify the argument processing loop. Don't accept abbreviations
4322 for option names; these might conflict with other configuration
4323 options in the future.
4324 Add some support for the `--srcdir' option. Check for the sources
4325 in . and .. if `--srcdir' is omitted. If the directories we will
4326 compile in don't exist yet, create them under the current directory.
4327 Note that the rest of the build process doesn't really support
4328 this.
4329 Edit only the top Makefile. That should edit the others. Edit
4330 into the makefile: `version', from lisp/version.el, `configname'
4331 and `srcdir' from the configuration arguments, `CC' and
4332 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4333 the user's path, and LOADLIBES as gleaned from the system
4334 description files.
4335 Simplify the report generated; it doesn't need to include any
4336 description of paths now.
4337 Make `config.status' exec configure instead of just calling it, so
4338 there's no harm in overwriting `config.status'.
4339 * Makefile.in (version, configname): New variables, used to choose
4340 the default values for datadir and libdir.
4341 Path variables rearranged into two clearer groups:
4342 - In the first group are the variables specified by the GNU coding
4343 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4344 manext, infodir, and srcdir).
4345 - In the second are the variables actually used for Emacs's paths
4346 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4347 archlibdir), which depend on the first category.
4348 datadir and libdir default to directories under
4349 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4350 demand.
4351 etcdir and lispdir default to subdirectories of datadir.
4352 archlibdir defaults to libdir.
4353 The new installation tree is a bit deeper than it used to be, so
4354 use the new make-path program in lib-src to build them all.
4355 Always build a new src/paths.h.tmp and then move-if-change it to
4356 src/paths.h, to avoid unnecessary rebuilds while responding to the
4357 right changes.
4358 Remove all mention of arch-lib. Run utility commands from
4359 lib-src, and let the executables be copied into archlibdir when
4360 Emacs is installed.
4361 Add targets for src/Makefile, lib-src/Makefile, and
4362 oldXMenu/Makefile, editing the values of the path variables into
4363 them.
4364 Let lib-src do its own installation.
4365 (datadir): Default to putting data files under
4366 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4367 (emacsdir): Variable deleted; it would only be confusing to use.
4368 (lispdir, etcdir): Default to ${datadir}/lisp.
4369 (mkdir): Use make-path for this.
4370 (lockdir): Do this in mkdir.
4371 (Makefile): New target.
4372
4373 * configure (usage_message): Rename to long_usage.
4374
4375 * make-dist: Don't bother creating an arch-lib directory; that's
4376 only for installation now.
4377
43781992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4379
4380 * configure: Use GCC-style configuration names, using config.sub.
4381 Change the usage and help messages.
4382
4383 * configure: Initialize window_system, not indow_system.
4384
4385 * configure: Report which window system, compiler, and signal
4386 handler return type we decide to use.
4387
4388 * make-dist: Explain what's going on if config.sub and gmalloc.c
4389 can't be linked. Place the code which copies them near the code
4390 which links the rest of the files around them.
4391
43921992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4393
4394 * make-dist: Don't bother to distribute src/*.com, or
4395 src/vmsbuild; those have all been moved to `../vms'.
4396
43971992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4398
4399 * make-dist: Don't forget that the way to avoid filenames starting
4400 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4401 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4402 couldn't make hard links to, since we have two already, and
4403 perhaps more to come.
4404
44051992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4406
4407 * configure: When editing parameters into lib-src/Makefile, change
4408 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4409 needs some other flags too.
4410
44111992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4412
4413 * configure: Remove spurious echo of the configuration name.
4414
4415 * make-dist: Don't distribute files in src/m and src/s whose names
4416 begin with `='.
4417
44181992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4419
4420 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4421 Also LISP_FLOAT_TYPE.
4422
44231992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4424
4425 * make-dist: Copy config.sub, since it's a symbolic link to a file
4426 on another file system.
4427
44281992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4429
4430 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4431 distribution.
4432
4433 * config.sub: New file, to help us recognize configuration names.
4434 * make-dist: Include it in the distribution.
4435
44361992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4437
4438 * configure: Convert `-' to `_' in specified option names.
4439 Accept options with --. Delete --highpri and --have-x-menu options.
4440 New options --with-x and --with-x10 replace -window-system.
4441 Don't mention options --gnu-malloc, --rel-alloc
4442 or --lisp-float-type in help message.
4443
44441992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4445
4446 * make-dist: Include the `vms' subdirectory in the distribution.
4447
44481992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4449
4450 * configure: Remove lines starting with "# DIST: " when building
4451 lib-src/Makefile and src/Makefile. This allows us to mark the
4452 "Makefile.in" files with explanatory comments which won't also get
4453 stuck in the Makefiles.
4454
44551992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4456
4457 * make-dist: Don't use the '+' operator in the sed regular
4458 expression that extracts the version number from lisp/version.el;
4459 Ultrix sed doesn't seem support the operator. Just double the
4460 operand and use *.
4461
44621992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4463
4464 * Makefile.in: Doc fix.
4465
44661992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4467
4468 * configure: Rewrite sed command to remove at most one ./ prefix;
4469 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4470 group.
4471
44721992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4473
4474 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4475
44761992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4477
4478 * make-dist: Go ahead and build a new TAGS file, unless the
4479 --newer option was specified. Don't try to delete a TAGS file
4480 from etc; it's not kept there, and shouldn't be deleted anyway.
4481
44821992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4483
4484 * make-dist: If the lisp directory contains a default.el, don't
4485 distribute it.
4486
4487 * configure: When searching signal.h for the type of a signal
4488 return handler, make a copy of it, not a symbolic link to it; that
4489 way, it will work on systems that don't have symbolic links.
4490
44911992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4492
4493 * make-dist: taught it about vcdiff and rcs2log, added --newer
4494 option for generating incremental distributions. Stopped it from
4495 generating a TAGS file into the distribution; that sucker is
4496 *big*, and easily enough generated with the toplevel makefile.
4497
44981992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4499
4500 * configure: When writing config.status, don't prefix progname
4501 with a '.'; it might be absolute.
4502
45031992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4504
4505 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4506 /usr/include/X11 exist, not only if both exist.
4507
45081992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4509
4510 * make-dist: Make the new external-lisp directory a duplicate of
4511 the external-lisp directory, not the lisp directory.
4512
45131992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4514
4515 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4516 clean' in arch-lib; it doesn't even have a Makefile.
4517
4518 * Makefile.in (clean, mostlyclean): In the test which tries to
4519 distinguish between the build directory, which should be cleaned,
4520 and the installed directory, which shouldn't, cd to `${emacsdir}',
4521 not `${DESTDIR}${LIBDIR}'.
4522
45231992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4524
4525 * make-dist: Be sure to delete the .c and .h files that YACC and
4526 BISON create from getdate.y.
4527
4528 * external-lisp: New directory; see `external-lisp/README'.
4529 * make-dist: Added support for the external-lisp subdirectory.
4530
4531 * make-dist: Changed message which complains that make-dist wasn't
4532 invoked in the right directory to indicate which files it was
4533 looking for.
4534
45351992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4536
4537 * configure: Add comments explaining why we can't translate
4538 character ranges or control characters in `tr'.
4539
45401992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4541
4542 * configure: When generating the configuration message, we used to
4543 build the message from the start so that each line began with "# "
4544 so that it would be a comment in `config.status'. However, this
4545 causes trouble if any of the variables we use in the message
4546 expand to more than one line of text - as gnu_malloc_reason
4547 sometimes does. So instead, we build the message as it should be
4548 printed to the user (i.e. without the "# " prefixes), and stick on
4549 the "# "s when we write it to `config.status'.
4550
4551 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4552 `lib-src' and `arch-lib'.
4553
4554 * configure: When generating report and `config.status' file, note
4555 that bindir only determines where `make install' and
4556 `build-install' will place the executables; this should make it
4557 clear that the ordinary build process will not try to install
4558 things.
4559
45601992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4561
4562 * make-dist: Change messages to say that we are 'making links to
4563 X', rather than 'copying X'. And put `' quotes around file names.
4564
4565 * make-dist: Include '.tmp' in the name of the staging directory.
4566
4567 * make-dist: Pass the `-f' option to rm when you're not sure that
4568 the files you're removing actually exist.
4569
4570 * make-dist: When setting up etc/COPYING, always nuke whatever is
4571 there, and then copy it in, to make sure we get a real file.
4572
4573 * make-dist: Don't try to distribute *.defns files any more. The
4574 only such file was for simula.el, which has been superceded by a
4575 version which doesn't have a separate .defns file.
4576
45771992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4578
4579 * make-dist: Don't distribute configured versions of config.h.in,
4580 paths.h.in, Makefile.in in src.
4581
4582 * configure: Delete .tmp files before creating them; don't bother
4583 trying to make final targets writeable first, since it won't
4584 matter to move-if-change.
4585
45861992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4587
4588 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4589 mkdir and chmod in the center of all the conditionals. GNU Make
4590 will strip these out, but other makes won't.
4591
45921992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4593
4594 * make-dist: Include move-if-change in list of files to distribute.
4595
45961992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4597
4598 * configure: Remove any "." elements from the program name.
4599
4600 * configure: Don't record the values of all the possible arguments
4601 in config.status; only record the options that the user specified.
4602
4603 * configure: Use move-if-change to move in the new src/config.h.
4604
46051992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4606
4607 * move-if-change: New file, copied from gcc release.
4608 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4609 a temp file, so we don't update paths.h if an error occurs or if
4610 it doesn't need changing.
4611
46121992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4613
4614 * Makefile.in (src/paths.h): Do not install a value for the
4615 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4616 * build-install.in: Same thing.
4617
46181992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4619
4620 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4621 latter, being a typo, is always false, resulting in a program
4622 whose default behaviour is to painstakingly build a copy of the
4623 source tree, and then delete it. Rah.
4624
4625 * Makefile.in: Add dist target, and comment for it.
4626
4627 * configure: When scanning <signal.h> for a declaration for
4628 signal, create a symbolic link with a name ending in .c, so the
4629 compiler won't complain that it's only been given .h files.
4630
4631 * configure: Check whether there are any arguments available
4632 before shifting to get the value of a non-boolean parameter.
4633
4634 * make-dist: Doc fix.
4635
46361992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4637
4638 * configure: Instead of grepping /usr/include/signal.h for a
4639 signal declaration, run /usr/include/signal.h or
4640 /usr/include/sys/signal.h through cpp and grep for the
4641 declaration.
4642
4643 * configure: Redirect the output of grep to /dev/null instead of
4644 using grep -s - that flag means different things on other systems.
4645
4646 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4647 since the former is recognizable even if you don't know what
4648 'dumping' is.
4649 * configure: Accomodate that change.
4650
4651 * configure: Accept options for all of the directories you can
4652 change in the Makefile.
4653
4654 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4655
4656 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4657 FOO before you can use them.
4658
4659 * build-install.in: Made the "Where To Install Things" section
4660 conform with the similar section from Makefile.in. Copied section
4661 which builds src/paths.h from src/paths.h.in from the Makefile.
4662
46631992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4664
4665 * configure: Write config.status to pass its command-line
4666 arguments on to configure, so that people can use it to recreate
4667 an old configuration, with minor changes.
4668
46691992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4670
4671 * configure: Don't rely on option variables being unset if their
4672 values are the empty string. In particular, when producing the
4673 English report, don't assume that highpri will be unset when no
4674 increased priority has been requested; -highpri='' should be the
4675 same as omitting -highpri altogether.
4676
4677 * configure: Fix dumb bug: when running the system and machine
4678 description files through cpp, mark those lines that we want to
4679 evaluate with the string '@configure@', and then only evaluate
4680 them. This way if the files include anything that actually
4681 generates text (type definitions or external declarations, say),
4682 we won't try to eval it.
4683
46841992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4685
4686 * make-dist: New shell script.
4687
4688 * configure: When creating foo from foo.in, make foo read-only to
4689 remind people to edit the .in file instead.
4690
4691 * INSTALL: Changed references to config.h-dist to config.h.in.
4692 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4693 to build src/paths.h from src/paths.h.in; added a paragraph to do
4694 this.
4695 * configure, Makefile, build-install: Changed filenames like
4696 FOO-dist to FOO.in.
4697
46981992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4699
4700 * Makefile, build-install: Renamed to Makefile.in and
4701 build-install.in; the configure script will edit these to produce
4702 the usable Makefile and build-install.
4703 * configure: Changed to produce ./Makefile, ./build-install,
4704 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4705 instead of editing them in place.
4706
47071992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4708
4709 * Makefile: Re-arranged so that the undumped Emacs will search
4710 ../lisp *after* the site's local elisp files.
4711 (locallisppath, dumplisppath): New variables.
4712 (lisppath): This variable's default value is now chosen based on
4713 $(locallisppath) and $(lispdir); while it used to be the
4714 customization point for adding site-local elisp directories to
4715 load-path, that job is now handled mostly by locallisppath.
4716 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4717 Check the values being assigned to the *LOADSEARCH macros for null
4718 path elements (like '::' in 'foo::bar').
4719
4720 * configure: When checking if the machine- and system-dependent
4721 files define a particular macro or not, actually run them through
4722 CPP and test the macros with #ifs, instead of just grepping for
4723 the macros' names. In particular, check for SYSTEM_MALLOC in this
4724 way.
4725
47261992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4727
4728 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4729
47301992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4731
4732 * configure: Make the config.status file an executable shell
4733 script which will recreate the same configuration. Include the
4734 verbal description of the current configuration as a comment in
4735 the script.
4736 * INSTALL: Doc fix.
4737
4738 * Makefile: brought the Makefile up to the GNU coding
4739 standards, as described in standards.text:
4740 (TAGS): New name for the target which rebuilds the tags table.
4741 (check): New target; doesn't do anything yet.
4742 (mostlyclean): New target, synonymous with clean.
4743 (realclean): New target. Currently, this just calls the
4744 subdirectories's makefiles and then deletes config.status.
4745 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4746 variables.
4747 Installation directory variables changed to conform.
4748 (install, install.sysv, install.xenix, install.aix): Changed the
4749 code which copies the directories into their installed location to
4750 allow the installed locations to be in several different
4751 directories; the old version assumed that they would all be in
4752 $(emacsdir).
4753 (mkdir, lockdir): Allow the installed locations to be in several
4754 different directories.
4755 * INSTALL: Doc fix.
4756
4757 * build-install: Use the same variable names as the Makefile.
4758 Allow the installed locations to be in several different
4759 directories.
4760
47611992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4762
4763 * Makefile (src/paths.h): Instead of using a single sed command to
4764 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4765 separately, and don't forget to append "/!!!SuperLock!!!" to the
4766 value of the PATH_SUPERLOCK macro.
4767
4768 * config.emacs: Renamed to configure, for consistency with other
4769 GNU products. Internal references changed.
4770 INSTALL, Makefile: References changed.
4771
4772 * lock: New directory, which should always be empty. If this
4773 directory doesn't exist, Emacs won't complain; it just won't lock.
4774 Having this here means that people can just unpack Emacs, build
4775 it, and have locking work.
4776
4777 * share-lib: Re-renamed to etc, for the sake of tradition.
4778 * config.emacs: Changed default value for datadir to ../etc.
4779 * INSTALL, README: Adjusted.
4780
47811992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4782
4783 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4784 by running CPP on the appropriate s/*.h and m/*.h files.
4785
47861992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4787
4788 * config.emacs: Make sure to set the "exit on error" flag once
4789 we've removed config.status; errors should abort the configuration.
4790
47911992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4792
4793 * config.emacs: Added -distribute option, so that the Makefile
4794 paths are in their proper form. I don't know why this matters.
4795
47961992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4797
4798 * local-lisp: New directory, empty in the distribution, for people
4799 to put local elisp code in.
4800 * config.emacs: Include it in the default load path.
4801 * README: Document it.
4802
48031992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4804
4805 * config.emacs: Guess the type of signal handling functions based
4806 on the contents of /usr/include/signal.h.
4807
4808 * config.emacs: Print out progress report messages.
4809
4810 * Makefile (src/paths.h): Don't generically replace
4811 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4812 editing of the other entries, and each entry should be dealt with
4813 explicitly anyway.
4814
4815 * build-install: Converted from C-shell to Bourne shell.
4816 * config.emacs: Edit build-install properly.
4817
4818 * config.emacs: Doc fix.
4819
48201992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4821
4822 * Makefile (install): Remove `B' from tar xf command.
4823
48241992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4825
4826 * config.emacs: Removed support for the `maintain-environment'
4827 option; the only important difference between this and its absence
4828 has been removed.
4829 * INSTALL: Removed mention of `maintain-environment'.
4830
4831 * config.emacs: Fix arguments to sed when processing boolean
4832 arguments.
4833
48341991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4835
4836 * config.emacs: New file, to help automate the installation
4837 process.
4838
4839 * Makefile: Lots of changes to support the separation of etc into
4840 architecture-dependent and -independent files:
4841 (EMACSROOT): New variable, giving the directory under which all of
4842 Emacs's libraries should be installed. Changed rest of file to
4843 use it.
4844 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4845 (DATADIR): New variable, denoting architecture-independent dir.
4846 (LOCKDIR): New variable, for completeness.
4847 (SUBDIR): No more etc, new lib-src.
4848 (COPYDIR): No more etc, new arch-lib and share-lib.
4849 (src/paths.h): Set PATH_DATA and the LOCK macros too.
4850 (src): Now depends on lib-src, not etc.
4851 * build-install: Changes parallel to the above.
4852 * README: Describe the new arrangement.
4853
4854 * vms: New subdirectory for all the VMS stuff.
4855
48561991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4857
4858 * Makefile (LISPPATH): New variable.
4859 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
4860
48611990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
4862
4863 * Makefile (install, install.sysv, install.xenix):
4864 Install wakeup instead of loadst. No need for setuid or setgid.
4865
48661990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4867
4868 * Makefile (clean): Clean etc if that's not the installation dir.
4869
48701990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4871
4872 * Makefile (paths.h): Make sed alter each name in the path.
4873
48741988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4875
4876 * Makefile (install.sysv): Use cpio, not tar.
4877
48781988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4879
4880 * Makefile (lockdir): Rename `lock' target.
4881 Depend on it from install*, not from `all'.
4882
48831988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
4884
4885 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
4886 to match build-install and paths.h.
6922b018
KH
4887
4888;; Local Variables:
4889;; coding: iso-2022-7bit-unix
4890;; End: