X-Git-Url: https://git.hcoop.net/ntk/apt.git/blobdiff_plain/6072cbe130d5ada4d733bb82dcd30c1529084985..49d8379b0d89e14ae45eaac1270b2f278755d7da:/doc/po/de.po diff --git a/doc/po/de.po b/doc/po/de.po index 4a7cd414..f6e15810 100644 --- a/doc/po/de.po +++ b/doc/po/de.po @@ -1,14 +1,14 @@ # Translation of apt-doc to German # Copyright (C) 1997, 1998, 1999 Jason Gunthorpe and others. # This file is distributed under the same license as the apt-doc package. -# Chris Leick , 2009-2011. +# Chris Leick , 2009-2012. # msgid "" msgstr "" -"Project-Id-Version: apt-doc 0.9.5\n" +"Project-Id-Version: apt-doc 0.9.7\n" "Report-Msgid-Bugs-To: APT Development Team \n" -"POT-Creation-Date: 2012-06-04 16:28+0300\n" -"PO-Revision-Date: 2012-05-21 23:18+0100\n" +"POT-Creation-Date: 2012-06-09 22:05+0300\n" +"PO-Revision-Date: 2012-06-25 22:49+0100\n" "Last-Translator: Chris Leick \n" "Language-Team: German \n" "Language: de\n" @@ -912,14 +912,6 @@ msgstr "" #. type: Content of: #: apt-get.8.xml:172 -#, fuzzy -#| msgid "" -#| "Source packages are tracked separately from binary packages via " -#| "deb-src type lines in the &sources-list; file. This " -#| "means that you will need to add such a line for each repository you want " -#| "to get sources from. If you don't do this you will probably get another " -#| "(newer, older or none) source version than the one you have installed or " -#| "could install." msgid "" "Source packages are tracked separately from binary packages via deb-" "src lines in the &sources-list; file. This means that you will " @@ -928,11 +920,11 @@ msgid "" "versions or none at all." msgstr "" "Paketquellen werden vom Programmpaket getrennt über deb-src-Typzeilen in der &sources-list;-Datei nachverfolgt. Das bedeutet, " +"literal>-Zeilen in der &sources-list;-Datei nachverfolgt. Das bedeutet, " "dass Sie für jedes Depot, aus dem Sie Quellen erhalten wollen, eine solche " -"Zeile hinzufügen müssen. Wenn Sie dies nicht tun, werden Sie eine andere als " -"die passende (neuere, ältere oder keine) Quellenversion erhalten, die Sie " -"installiert haben oder installieren könnten." +"Zeile hinzufügen müssen; andernfalls werden Sie eventuell entweder die " +"falschen Versionen (zu alte/zu neue) oder überhaupt keine Quellpakete " +"erhalten." #. type: Content of: #: apt-get.8.xml:178 @@ -967,19 +959,14 @@ msgstr "" #. type: Content of: #: apt-get.8.xml:191 -#, fuzzy -#| msgid "" -#| "Note that source packages are not tracked like binary packages, they " -#| "exist only in the current directory and are similar to downloading source " -#| "tar balls." msgid "" "Note that source packages are not installed and tracked in the " "dpkg database like binary packages; they are simply " "downloaded to the current directory, like source tarballs." msgstr "" -"Beachten Sie, dass Quellpakete nicht wie normale Programmpakete nachverfolgt " -"werden, sie existieren nur im aktuellen Verzeichnis und sind " -"heruntergeladenen Tarballs ähnlich." +"Beachten Sie, dass Quellpakete nicht wie normale Programmpakete in der " +"Datenbank von dpkg installiert und nachverfolgt werden; " +"sie werden nur wie Quell-Tarballs in das aktuelle Verzeichnis heruntergeladen." #. type: Content of: #: apt-get.8.xml:197 @@ -1218,15 +1205,6 @@ msgstr "" #. type: Content of: #: apt-get.8.xml:330 -#, fuzzy -#| msgid "" -#| "Simulation run as user will deactivate locking (Debug::" -#| "NoLocking) automatic. Also a notice will be displayed " -#| "indicating that this is only a simulation, if the option APT::" -#| "Get::Show-User-Simulation-Note is set (Default: true). Neither " -#| "NoLocking nor the notice will be triggered if run as root (root should " -#| "know what he is doing without further warnings by apt-get)." msgid "" "Simulated runs performed as a user will automatically deactivate locking " "(Debug::NoLocking), and if the option APT::Get::" @@ -1236,22 +1214,17 @@ msgid "" "should know what they are doing without further warnings from apt-" "get." msgstr "" -"Ausführung der Simulation als normaler Anwender wird das Sperren " -"(Debug::NoLocking) automatisch deaktivieren. Außerdem " -"wird eine Mitteilung angezeigt, die angibt, dass dies nur eine Simulation " -"ist, wenn die Option APT::Get::Show-User-Simulation-Note " -"gesetzt ist (Vorgabe ist »true«). Weder NoLocking noch die Mitteilung werden " -"ausgelöst, wenn es als root ausgeführt wird (root sollte ohne weitere " -"Warnungen von apt-get wissen, was er tut)." +"Simulierte Durchläufe als Benutzer werden automatisch das Sperren " +"deaktivieren (Debug::NoLocking) und falls die Option " +"APT::Get::Show-User-Simulation-Note gesetzt ist (was " +"standardmäßig der Fall ist), wird außerdem eine Benachrichtigung angezeigt, " +"die angibt, dass es sich hierbei nur um eine Simulation handelt. Simulierte " +"Durchläufe als Root lösen weder NoLocking noch die Benachrichtigung aus – " +"Superuser sollten ohne vorherige Warnung von apt-get " +"wissen, was sie tun." #. type: Content of: #: apt-get.8.xml:338 -#, fuzzy -#| msgid "" -#| "Simulate prints out a series of lines each one representing a dpkg " -#| "operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square " -#| "brackets indicate broken packages and empty set of square brackets " -#| "meaning breaks that are of no consequence (rare)." msgid "" "Simulated runs print out a series of lines, each representing a " "dpkg operation: configure (Conf), " @@ -1259,9 +1232,10 @@ msgid "" "Square brackets indicate broken packages, and empty square brackets indicate " "breaks that are of no consequence (rare)." msgstr "" -"Simulieren gibt eine Serie von Zeilen aus, von denen jede eine Dpkg-" -"Operation darstellt: Konfigurieren (Conf), Entfernen (Remv), Entpacken " -"(Inst). Eckige Klammern zeigen beschädigte Pakete an und ein leeres Paar " +"Simulieren gibt eine Serie von Zeilen aus, von denen jede eine " +"dpkg-Operation darstellt: Konfigurieren (Conf), Entfernen (Remv), Entpacken (Inst). Eckige Klammern zeigen beschädigte Pakete an und ein leeres Paar " "eckiger Klammern bedeutet Unterbrechungen, die keine Folgen haben (selten)." #. type: Content of: @@ -1291,10 +1265,6 @@ msgstr "" #. type: Content of: #: apt-get.8.xml:359 -#, fuzzy -#| msgid "" -#| "Show upgraded packages; Print out a list of all packages that are to be " -#| "upgraded. Configuration Item: APT::Get::Show-Upgraded." msgid "" "Show upgraded packages; print out a list of all packages that are to be " "upgraded. Configuration Item: APT::Get::Show-Upgraded." @@ -1442,14 +1412,6 @@ msgstr "" #. type: Content of: #: apt-get.8.xml:440 -#, fuzzy -#| msgid "" -#| "This option defaults to on, use --no-list-cleanup to " -#| "turn it off. When on apt-get will automatically manage " -#| "the contents of &statedir;/lists to ensure that " -#| "obsolete files are erased. The only reason to turn it off is if you " -#| "frequently change your source list. Configuration Item: APT::" -#| "Get::List-Cleanup." msgid "" "This option is on by default; use --no-list-cleanup to " "turn it off. When it is on, apt-get will automatically " @@ -1581,14 +1543,14 @@ msgstr "" #. type: Content of: #: apt-get.8.xml:518 apt-cache.8.xml:343 apt-key.8.xml:174 apt-mark.8.xml:125 -#: apt.conf.5.xml:1118 apt_preferences.5.xml:698 +#: apt.conf.5.xml:1156 apt_preferences.5.xml:698 msgid "Files" msgstr "Dateien" #. type: Content of: <refentry><refsect1><title> #: apt-get.8.xml:528 apt-cache.8.xml:350 apt-key.8.xml:195 apt-mark.8.xml:131 -#: apt-secure.8.xml:192 apt-cdrom.8.xml:144 apt-config.8.xml:109 -#: apt.conf.5.xml:1124 apt_preferences.5.xml:705 sources.list.5.xml:252 +#: apt-secure.8.xml:191 apt-cdrom.8.xml:144 apt-config.8.xml:109 +#: apt.conf.5.xml:1162 apt_preferences.5.xml:705 sources.list.5.xml:252 #: apt-extracttemplates.1.xml:70 apt-sortpkgs.1.xml:63 #: apt-ftparchive.1.xml:607 msgid "See Also" @@ -1817,13 +1779,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> #: apt-cache.8.xml:128 -#, fuzzy -#| msgid "" -#| "<literal>Total distinct</literal> versions is the number of package " -#| "versions found in the cache; this value is therefore at least equal to " -#| "the number of total package names. If more than one distribution (both " -#| "\"stable\" and \"unstable\", for instance), is being accessed, this value " -#| "can be considerably larger than the number of total package names." msgid "" "<literal>Total distinct</literal> versions is the number of package versions " "found in the cache; this value is therefore at least equal to the number of " @@ -1834,9 +1789,9 @@ msgstr "" "<literal>Total distinct</literal> Versionen ist die Anzahl der im " "Zwischenspeicher gefundenen Paketversionen. Dieser Wert ist daher meistens " "gleich der Anzahl der gesamten Paketnamen. Wenn auf mehr als eine " -"Distribution (zum Beispiel »stable« und »unstable« zusammen) zugegriffen " -"wird, kann dieser Wert deutlich größer als die gesamte Anzahl der Paketnamen " -"sein." +"Distribution zugegriffen wird (zum Beispiel »Stable« und »Unstable« " +"zusammen), kann dieser Wert deutlich größer als die gesamte Anzahl der " +"Paketnamen sein." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para> #: apt-cache.8.xml:135 @@ -1849,11 +1804,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-cache.8.xml:143 -#, fuzzy -#| msgid "" -#| "<literal>showsrc</literal> displays all the source package records that " -#| "match the given package names. All versions are shown, as well as all " -#| "records that declare the name to be a Binary." msgid "" "<literal>showsrc</literal> displays all the source package records that " "match the given package names. All versions are shown, as well as all " @@ -1861,7 +1811,7 @@ msgid "" msgstr "" "<literal>showsrc</literal> zeigt alle Quellpaketdatensätze, die den " "angegebenen Paketnamen entsprechen. Alle Versionen werden ebenso angezeigt, " -"wie alle Datensätze, die den Namen für ein Programm deklarieren." +"wie alle Datensätze, die den Namen für ein Binärpaket deklarieren." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-cache.8.xml:149 @@ -2010,23 +1960,17 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-cache.8.xml:216 -#, fuzzy -#| msgid "" -#| "The resulting nodes will have several shapes; normal packages are boxes, " -#| "pure provides are triangles, mixed provides are diamonds, missing " -#| "packages are hexagons. Orange boxes mean recursion was stopped [leaf " -#| "packages], blue lines are pre-depends, green lines are conflicts." msgid "" "The resulting nodes will have several shapes; normal packages are boxes, " "pure virtual packages are triangles, mixed virtual packages are diamonds, " "missing packages are hexagons. Orange boxes mean recursion was stopped (leaf " "packages), blue lines are pre-depends, green lines are conflicts." msgstr "" -"Die resultierenden Knoten haben mehrere Formen. Normale Pakete sind " -"Kästchen, reine Bereitstellungen sind Dreiecke, gemischte Bereitstellungen " -"sind Diamanten, fehlende Pakete sind Sechsecke. Orange Kästchen bedeuten, " -"dass die Rekursion beendet wurde [Blattpakete], blaue Linien sind Pre-" -"depends, grüne Linien sind Konflikte." +"Die resultierenden Knoten haben mehrere Formen: Normale Pakete sind Kästchen, " +"rein virtuelle Pakete sind Dreiecke, gemischt virtuelle Pakete sind " +"Diamanten, fehlende Pakete sind Sechsecke. Orange Kästchen bedeuten, dass die " +"Rekursion beendet wurde [Leaf Packages], blaue Linien sind Pre-depends, grüne " +"Linien sind Konflikte." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-cache.8.xml:221 @@ -2332,14 +2276,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml:144 -#, fuzzy -#| msgid "" -#| "Work similar to the <command>update</command> command above, but get the " -#| "archive keyring from an URI instead and validate it against a master " -#| "key. This requires an installed &wget; and an APT build configured to " -#| "have a server to fetch from and a master keyring to validate. APT in " -#| "Debian does not support this command and relies on <command>update</" -#| "command> instead, but Ubuntu's APT does." msgid "" "Perform an update working similarly to the <command>update</command> command " "above, but get the archive keyring from a URI instead and validate it " @@ -2581,10 +2517,10 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt-secure.8.xml:60 msgid "" -"If a package comes from a archive without a signature or with a signature " -"that apt does not have a key for that package is considered untrusted and " +"If a package comes from a archive without a signature, or with a signature " +"that apt does not have a key for, that package is considered untrusted, and " "installing it will result in a big warning. <command>apt-get</command> will " -"currently only warn for unsigned archives, future releases might force all " +"currently only warn for unsigned archives; future releases might force all " "sources to be verified before downloading packages from them." msgstr "" "Wenn ein Paket aus einem Archiv ohne Signatur stammt oder einem mit " @@ -2611,12 +2547,12 @@ msgstr "Vertrauenswürdige Archive" #. type: Content of: <refentry><refsect1><para> #: apt-secure.8.xml:77 msgid "" -"The chain of trust from an apt archive to the end user is made up of " -"different steps. <command>apt-secure</command> is the last step in this " -"chain, trusting an archive does not mean that the packages that you trust it " -"do not contain malicious code but means that you trust the archive " -"maintainer. It's the archive maintainer responsibility to ensure that the " -"archive integrity is correct." +"The chain of trust from an apt archive to the end user is made up of several " +"steps. <command>apt-secure</command> is the last step in this chain; " +"trusting an archive does not mean that you trust its packages not to contain " +"malicious code, but means that you trust the archive maintainer. It's the " +"archive maintainer's responsibility to ensure that the archive's integrity " +"is preserved." msgstr "" "Eine Kette des Vertrauens von einem APT-Archiv zum Endanwender wird durch " "verschiedene Schritte erreicht. <command>apt-secure</command> ist der letzte " @@ -2643,11 +2579,11 @@ msgstr "" #: apt-secure.8.xml:92 msgid "" "The chain of trust in Debian starts when a maintainer uploads a new package " -"or a new version of a package to the Debian archive. This upload in order to " -"become effective needs to be signed by a key of a maintainer within the " -"Debian maintainer's keyring (available in the debian-keyring package). " -"Maintainer's keys are signed by other maintainers following pre-established " -"procedures to ensure the identity of the key holder." +"or a new version of a package to the Debian archive. In order to become " +"effective, this upload needs to be signed by a key contained in the Debian " +"Maintainers keyring (available in the debian-keyring package). Maintainers' " +"keys are signed by other maintainers following pre-established procedures to " +"ensure the identity of the key holder." msgstr "" "Die Kette des Vertrauens in Debian beginnt, wenn eine Betreuer ein neues " "Paket oder eine neue Version eines Pakets in das Debian-Archiv hochlädt. " @@ -2661,37 +2597,37 @@ msgstr "" #: apt-secure.8.xml:102 msgid "" "Once the uploaded package is verified and included in the archive, the " -"maintainer signature is stripped off, an MD5 sum of the package is computed " -"and put in the Packages file. The MD5 sum of all of the packages files are " -"then computed and put into the Release file. The Release file is then signed " -"by the archive key (which is created once a year) and distributed through " -"the FTP server. This key is also on the Debian keyring." -msgstr "" -"Sobald das hochgeladenen Paket überprüft und in das Archiv hinzugefügt " -"wurde, wird die Betreuersignatur entfernt, eine MD5-Summe des Pakets " -"berechnet und in die Paketdatei getan. Dann werden die MD5-Summen aller " -"Paketdateien berechnet und in die Release-Datei getan. Dann wird die Release-" -"Datei durch den Archivschlüssel signiert (der einmal jährlich erzeugt und " -"per FTP-Server verteilt wird). Dieser Schlüssel ist außerdem der Debian-" -"Schlüsselbund." +"maintainer signature is stripped off, and checksums of the package are " +"computed and put in the Packages file. The checksums of all of the Packages " +"files are then computed and put into the Release file. The Release file is " +"then signed by the archive key for this Debian release, and distributed " +"alongside the packages and the Packages files on Debian mirrors. The keys " +"are in the Debian archive keyring available in the <package>debian-archive-" +"keyring</package> package." +msgstr "" +"Sobald das hochgeladene Paket überprüft und dem Archiv hinzugefügt wurde, " +"wird die Betreuersignatur entfernt, Prüfsummen des Pakets werden berechnet " +"und in die Datei Packages abgelegt. Die Prüfsummen aller Paketdateien werden " +"berechnet und in der Release-Datei abgelegt. Dann wird die Release-Datei " +"durch den Archivschlüssel für diese Debian-Veröffentlichung signiert und " +"zusammen mit den Paketen und Packages-Dateien auf Debian-Spiegel verteilt. " +"Die Schlüssel sind im Debian-Archivschlüsselbund im Paket " +"<package>debian-archive-keyring</package> verfügbar." #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:112 +#: apt-secure.8.xml:113 msgid "" -"Any end user can check the signature of the Release file, extract the MD5 " -"sum of a package from it and compare it with the MD5 sum of the package he " -"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian " -"package was checked. Now both the MD5 sum and the signature of the Release " -"file are checked." +"End users can check the signature of the Release file, extract a checksum of " +"a package from it and compare it with the checksum of the package they " +"downloaded by hand - or rely on APT doing this automatically." msgstr "" -"Jeder Endanwender kann die Signatur der Release-Datei prüfen, die MD5-Summe " -"eines Paketes daraus entpacken und mit der MD5-Summe des Pakets vergleichen, " -"das er heruntergeladen hat. Vor Version 0.6 wurde nur die MD5-Summe des " -"heruntergeladenen Debian-Pakets geprüft. Nun werden sowohl die MD5-Summe als " -"auch die Signatur der Release-Datei geprüft." +"Endanwender können die Signatur der Release-Datei prüfen, die Prüfsumme eines " +"Paketes daraus entpacken und mit der Prüfsumme des Pakets vergleichen, das " +"sie manuell heruntergeladen haben – oder sich darauf verlassen, dass APT dies " +"automatisch tut." #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:119 +#: apt-secure.8.xml:118 msgid "" "Notice that this is distinct from checking signatures on a per package " "basis. It is designed to prevent two possible attacks:" @@ -2700,13 +2636,13 @@ msgstr "" "ist. Es wurde entworfen, um zwei mögliche Angriffe zu verhindern:" #. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> -#: apt-secure.8.xml:124 +#: apt-secure.8.xml:123 msgid "" "<literal>Network \"man in the middle\" attacks</literal>. Without signature " -"checking, a malicious agent can introduce himself in the package download " -"process and provide malicious software either by controlling a network " -"element (router, switch, etc.) or by redirecting traffic to a rogue server " -"(through arp or DNS spoofing attacks)." +"checking, malicious agents can introduce themselves into the package " +"download process and provide malicious software either by controlling a " +"network element (router, switch, etc.) or by redirecting traffic to a rogue " +"server (through ARP or DNS spoofing attacks)." msgstr "" "<literal>Network \"man in the middle\" attacks</literal>. Ohne " "Signaturprüfung kann ein schädlicher Mittelsmann sich selbst in das " @@ -2716,7 +2652,7 @@ msgstr "" "oder DNS-Manipulationsangriffe) erfolgen." #. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> -#: apt-secure.8.xml:132 +#: apt-secure.8.xml:131 msgid "" "<literal>Mirror network compromise</literal>. Without signature checking, a " "malicious agent can compromise a mirror host and modify the files in it to " @@ -2729,7 +2665,7 @@ msgstr "" "Pakete von diesem Rechner herunterladen." #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:139 +#: apt-secure.8.xml:138 msgid "" "However, it does not defend against a compromise of the Debian master server " "itself (which signs the packages) or against a compromise of the key used to " @@ -2742,16 +2678,16 @@ msgstr "" "Fall kann dieser Mechanismus eine Signatur pro Paket ergänzen." #. type: Content of: <refentry><refsect1><title> -#: apt-secure.8.xml:145 +#: apt-secure.8.xml:144 msgid "User configuration" msgstr "Benutzerkonfiguration" #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:147 +#: apt-secure.8.xml:146 msgid "" "<command>apt-key</command> is the program that manages the list of keys used " -"by apt. It can be used to add or remove keys although an installation of " -"this release will automatically provide the default Debian archive signing " +"by apt. It can be used to add or remove keys, although an installation of " +"this release will automatically contain the default Debian archive signing " "keys used in the Debian package repositories." msgstr "" "<command>apt-key</command> ist das Programm, das die Liste der von APT " @@ -2761,7 +2697,7 @@ msgstr "" "den Debian-Paketdepots benutzt werden." #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:154 +#: apt-secure.8.xml:153 msgid "" "In order to add a new key you need to first download it (you should make " "sure you are using a trusted communication channel when retrieving it), add " @@ -2779,12 +2715,12 @@ msgstr "" "herunterladen und prüfen kann." #. type: Content of: <refentry><refsect1><title> -#: apt-secure.8.xml:163 +#: apt-secure.8.xml:162 msgid "Archive configuration" msgstr "Archivkonfiguration" #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:165 +#: apt-secure.8.xml:164 msgid "" "If you want to provide archive signatures in an archive under your " "maintenance you have to:" @@ -2793,7 +2729,7 @@ msgstr "" "stellen möchten, müssen Sie:" #. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> -#: apt-secure.8.xml:170 +#: apt-secure.8.xml:169 msgid "" "<emphasis>Create a toplevel Release file</emphasis>, if it does not exist " "already. You can do this by running <command>apt-ftparchive release</" @@ -2804,7 +2740,7 @@ msgstr "" "<command>apt-ftparchive release</command> (aus apt-utils) ausführen." #. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> -#: apt-secure.8.xml:175 +#: apt-secure.8.xml:174 msgid "" "<emphasis>Sign it</emphasis>. You can do this by running <command>gpg --" "clearsign -o InRelease Release</command> and <command>gpg -abs -o Release." @@ -2815,7 +2751,7 @@ msgstr "" "abs -o Release.gpg Release</command> ausführen." #. type: Content of: <refentry><refsect1><itemizedlist><listitem><para> -#: apt-secure.8.xml:179 +#: apt-secure.8.xml:178 msgid "" "<emphasis>Publish the key fingerprint</emphasis>, that way your users will " "know what key they need to import in order to authenticate the files in the " @@ -2826,18 +2762,18 @@ msgstr "" "Dateien im Archiv zu authentifizieren." #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:186 +#: apt-secure.8.xml:185 msgid "" -"Whenever the contents of the archive changes (new packages are added or " -"removed) the archive maintainer has to follow the first two steps previously " -"outlined." +"Whenever the contents of the archive change (new packages are added or " +"removed) the archive maintainer has to follow the first two steps outlined " +"above." msgstr "" "Immer wenn sich die Inhalte des Archivs ändern (neue Pakete hinzugefügt oder " "entfernt werden), muss der Archivbetreuer den beiden zuerst skizzierten " "Schritten folgen." #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:194 +#: apt-secure.8.xml:193 msgid "" "&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, " "&debsign; &debsig-verify;, &gpg;" @@ -2846,7 +2782,7 @@ msgstr "" "&debsign; &debsig-verify;, &gpg;" #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:198 +#: apt-secure.8.xml:197 msgid "" "For more background information you might want to review the <ulink url=" "\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian " @@ -2863,12 +2799,12 @@ msgstr "" ">Strong Distribution HOWTO</ulink> von V. Alex Brennen lesen." #. type: Content of: <refentry><refsect1><title> -#: apt-secure.8.xml:211 +#: apt-secure.8.xml:210 msgid "Manpage Authors" msgstr "Autoren der Handbuchseite" #. type: Content of: <refentry><refsect1><para> -#: apt-secure.8.xml:213 +#: apt-secure.8.xml:212 msgid "" "This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac " "Jones, Colin Walters, Florian Weimer and Michael Vogt." @@ -3046,13 +2982,6 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-config.8.xml:51 -#, fuzzy -#| msgid "" -#| "shell is used to access the configuration information from a shell " -#| "script. It is given pairs of arguments, the first being a shell variable " -#| "and the second the configuration value to query. As output it lists a " -#| "series of shell assignments commands for each present value. In a shell " -#| "script it should be used like:" msgid "" "shell is used to access the configuration information from a shell script. " "It is given pairs of arguments, the first being a shell variable and the " @@ -3060,11 +2989,12 @@ msgid "" "commands for each value present. In a shell script it should be used as " "follows:" msgstr "" -"shell wird benutzt, um aus einem Shellskript auf Konfigurationsinformationen " -"zuzugreifen. Es wird ein Paar aus Argumenten angegeben – das erste als Shell-" -"Variable und das zweite als Konfigurationswert zum Abfragen. Als Ausgabe " -"listet es eine Serie von Shell-Zuweisungsbefehlen für jeden vorhandenen Wert " -"auf. In einen Shellskript sollte es wie folgt benutzt werden:" +"»shell« wird benutzt, um aus einem Shellskript auf " +"Konfigurationsinformationen zuzugreifen. Es wird ein Paar von Argumenten " +"angegeben – das erste als Shell-Variable und das zweite als " +"Konfigurationswert zum Abfragen. Als Ausgabe führt es " +"Shell-Zuweisungsbefehle für jeden vorhandenen Wert auf. In einen Shellskript " +"sollte es wie folgt benutzt werden:" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting> #: apt-config.8.xml:59 @@ -3120,15 +3050,6 @@ msgstr "%f "%v";%n" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-config.8.xml:96 -#, fuzzy -#| msgid "" -#| "Defines the output of each config option. %t will be replaced with " -#| "the name of the option, %f with the complete optionname and " -#| "%v with the value of the option. Use uppercase letters and " -#| "special characters in the value will be encoded to ensure that it can e." -#| "g. be savely used in a quoted-string as defined by RFC822. Additionally " -#| "%n will be replaced by a newline, %N by a tab. A % " -#| "can be printed by using %%." msgid "" "Defines the output of each config option. %t will be replaced with " "its individual name, %f with its full hierarchical name and %v " @@ -3137,14 +3058,14 @@ msgid "" "as defined by RFC822. Additionally %n will be replaced by a newline, " "and %N by a tab. A % can be printed by using %%." msgstr "" -"definiert die Ausgabe jeder Option. %t wird durch den Namen der " -"Option ersetzt, %f durch den kompletten Optionsnamen und %v " -"durch den Wert der Option. Benutzen Sie im Wert, der Kodiert wird, " -"großgeschriebene Buchstaben und Sonderzeichen, um sicherzustellen, dass er z." -"B. in einer maskierten Zeichenkette, wie sie RFC822 definiert, sicher " -"verwandt werden kann. %n wird zusätzlich durch einen Zeilenumbruch " -"ersetzt, %N durch einen Tabulator. Ein % kann mittels %" -"% ausgegeben werden." +"definiert die Ausgabe jeder Konfigurationsoption. %t wird durch den " +"individuellen Namen ersetzt, %f durch ihren vollständigen " +"hierarchichen Namen und %v durch ihren Wert. Verwenden Sie " +"Großbuchstaben; Sonderzeichen in dem Wert werden kodiert, um sicherzustellen, " +"dass sie z.B. in einer maskierten Zeichenkette, wie sie RFC822 definiert, " +"sicher verwandt werden kann. %n wird zusätzlich durch einen " +"Zeilenumbruch ersetzt, %N durch einen Tabulator. Ein % kann " +"mittels %% ausgegeben werden." #. type: Content of: <refentry><refsect1><para> #: apt-config.8.xml:110 apt-extracttemplates.1.xml:71 apt-sortpkgs.1.xml:64 @@ -3184,19 +3105,19 @@ msgstr "Konfigurationsdatei für APT" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:42 msgid "" -"<filename>apt.conf</filename> is the main configuration file for the APT " -"suite of tools, but by far not the only place changes to options can be " -"made. All tools therefore share the configuration files and also use a " -"common command line parser to provide a uniform environment." +"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared " +"by all the tools in the APT suite of tools, though it is by no means the " +"only place options can be set. The suite also shares a common command line " +"parser to provide a uniform environment." msgstr "" -"<filename>apt.conf</filename> ist die Hauptkonfigurationsdatei für die APT-" -"Werkzeugsammlung, aber bei weitem nicht der einzige Ort, an dem Änderungen " -"vorgenommen werden können. Alle Werkzeuge nutzen die Konfigurationsdateien " -"daher gemeinsam und außerdem wird ein einheitlicher Befehlszeilenauswerter " -"benutzt, um eine einheitliche Umgebung bereitzustellen." +"<filename>/etc/apt/apt.conf</filename> ist die Hauptkonfigurationsdatei, die " +"sich alle Werkzeuge der APT-Suite teilen, es ist jedoch beileibe nicht der " +"einzige Ort, an dem Optionen gesetzt werden können. Die Suite benutzt " +"außerdem einen gemeinsamen Befehlszeilenauswerter, um eine einheitliche " +"Umgebung bereitzustellen." #. type: Content of: <refentry><refsect1><orderedlist><para> -#: apt.conf.5.xml:47 +#: apt.conf.5.xml:48 msgid "" "When an APT tool starts up it will read the configuration files in the " "following order:" @@ -3205,7 +3126,7 @@ msgstr "" "folgenden Reihenfolge lesen:" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:49 +#: apt.conf.5.xml:50 msgid "" "the file specified by the <envar>APT_CONFIG</envar> environment variable (if " "any)" @@ -3214,15 +3135,15 @@ msgstr "" "angegeben wird (falls gesetzt)" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:51 +#: apt.conf.5.xml:52 msgid "" "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending " "order which have either no or \"<literal>conf</literal>\" as filename " "extension and which only contain alphanumeric, hyphen (-), underscore (_) " "and period (.) characters. Otherwise APT will print a notice that it has " -"ignored a file if the file doesn't match a pattern in the <literal>Dir::" -"Ignore-Files-Silently</literal> configuration list - in this case it will be " -"silently ignored." +"ignored a file, unless that file matches a pattern in the <literal>Dir::" +"Ignore-Files-Silently</literal> configuration list - in which case it will " +"be silently ignored." msgstr "" "alle Dateien in <literal>Dir::Etc::Parts</literal> in aufsteigender " "alphanumerischer Reihenfolge, die entweder keine oder »<literal>conf</" @@ -3234,7 +3155,7 @@ msgstr "" "sie stillschweigend ignoriert." #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:58 +#: apt.conf.5.xml:59 msgid "" "the main configuration file specified by <literal>Dir::Etc::main</literal>" msgstr "" @@ -3242,7 +3163,7 @@ msgstr "" "angegeben wird" #. type: Content of: <refentry><refsect1><orderedlist><listitem><para> -#: apt.conf.5.xml:60 +#: apt.conf.5.xml:61 msgid "" "the command line options are applied to override the configuration " "directives or to load even more configuration files." @@ -3251,16 +3172,16 @@ msgstr "" "zu überschreiben oder um sogar mehrere Konfigurationsdateien zu laden." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:64 +#: apt.conf.5.xml:65 msgid "Syntax" msgstr "Syntax" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:65 +#: apt.conf.5.xml:66 msgid "" "The configuration file is organized in a tree with options organized into " "functional groups. Option specification is given with a double colon " -"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option " +"notation; for instance <literal>APT::Get::Assume-Yes</literal> is an option " "within the APT tool group, for the Get tool. Options do not inherit from " "their parent groups." msgstr "" @@ -3271,33 +3192,31 @@ msgstr "" "das Werkzeug Get. Optionen werden nicht von ihren Elterngruppe geerbt." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:71 +#: apt.conf.5.xml:72 msgid "" "Syntactically the configuration language is modeled after what the ISC tools " "such as bind and dhcp use. Lines starting with <literal>//</literal> are " "treated as comments (ignored), as well as all text between <literal>/*</" "literal> and <literal>*/</literal>, just like C/C++ comments. Each line is " -"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing " -"semicolon and the quotes are required. The value must be on one line, and " -"there is no kind of string concatenation. It must not include inside " -"quotes. The behavior of the backslash \"\\\" and escaped characters inside " -"a value is undefined and it should not be used. An option name may include " -"alphanumerical characters and the \"/-:._+\" characters. A new scope can be " -"opened with curly braces, like:" +"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The " +"quotation marks and trailing semicolon are required. The value must be on " +"one line, and there is no kind of string concatenation. Values must not " +"include backslashes or extra quotation marks. Option names are made up of " +"alphanumeric characters and the characters \"/-:._+\". A new scope can be " +"opened with curly braces, like this:" msgstr "" "Syntaktisch ist die Konfigurationssprache dem nachempfunden, was die ISC-" "Werkzeuge, wie bind und dhcp, benutzen. Zeilen, die mit <literal>//</" "literal> beginnen, werden als Kommentar betrachtet (und ignoriert), ebenso " "wie jeglicher Text zwischen <literal>/*</literal> und <literal>*/</literal>, " "wie bei C/C++-Kommentaren. Jede Zeile hat die Form <literal>APT::Get::Assume-" -"Yes \"true\";</literal>. Das abschließende Semikolon und die " -"Anführungszeichen werden benötigt. Der Wert muss in einer Zeile stehen und " -"es gibt keine Möglichkeit Zeichenketten aneinander zu hängen. Er darf keine " -"inneren Anführungszeichen enthalten. Das Verhalten des Backslashs »\\« und " -"maskierter Zeichen innerhalb eines Wertes ist nicht festgelegt und diese " -"sollten nicht benutzt werden. Ein Optionsname darf alphanumerische Zeichen " -"und die Zeichen »/-:._+« enthalten. Ein neuer Geltungsbereich kann mit " -"geschweiften Klammern geöffnet werden, wie:" +"Yes \"true\";</literal>. Die Anführungszeichen und abschließenden " +"Strichpunkte werden benötigt. Der Wert muss in einer Zeile stehen und " +"es gibt keine Möglichkeit Zeichenketten aneinander zu hängen. Werte dürfen " +"keine Rückwärtsschrägstriche oder zusätzliche Anführungszeichen enthalten. " +"Optionsnamen werden aus alphanumerischen Zeichen und den Zeichen »/-:._+« " +"gebildet. Ein neuer Geltungsbereich kann mit geschweiften Klammern geöffnet " +"werden, wie:" #. type: Content of: <refentry><refsect1><informalexample><programlisting> #: apt.conf.5.xml:85 @@ -3322,13 +3241,13 @@ msgstr "" msgid "" "with newlines placed to make it more readable. Lists can be created by " "opening a scope and including a single string enclosed in quotes followed by " -"a semicolon. Multiple entries can be included, each separated by a semicolon." +"a semicolon. Multiple entries can be included, separated by a semicolon." msgstr "" "mit eingefügten Zeilenumbrüchen, um es leserlicher zu gestalten. Listen " "können erstellt werden, indem ein Geltungsbereich geöffnet wird und eine " -"einzelne, von Anführungszeichen, denen ein Semikolon folgt, eingeschlossene " -"Zeichenkette eingefügt wird. Es können mehrere Einträge eingefügt werden, " -"jeweils getrennt durch ein Semikolon." +"einzelne, von Anführungszeichen, denen ein Schrägstrich folgt, " +"eingeschlossene Zeichenkette eingefügt wird. Es können mehrere Einträge " +"eingefügt werden, jeweils getrennt durch einen Schrägstrich." #. type: Content of: <refentry><refsect1><informalexample><programlisting> #: apt.conf.5.xml:98 @@ -3349,21 +3268,21 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:105 msgid "" -"The names of the configuration items are not case-sensitive. So in the " -"previous example you could use <literal>dpkg::pre-install-pkgs</literal>." +"Case is not significant in names of configuration items, so in the previous " +"example you could use <literal>dpkg::pre-install-pkgs</literal>." msgstr "" -"Die Namen der Konfigurationselemente sind nicht von Groß- und " -"Kleinschreibung abhängig. Deshalb könnten Sie im vorherigen Beispiel auch " +"Die Groß- und Kleinschreibung ist in Namen der Konfigurationselemente nicht " +"von Bedeutung, deshalb könnten Sie im vorherigen Beispiel auch " "<literal>dpkg::pre-install-pkgs</literal> benutzen." #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:108 msgid "" -"Names for the configuration items are optional if a list is defined as it " -"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. " -"If you don't specify a name a new entry will simply add a new option to the " -"list. If you specify a name you can override the option as every other " -"option by reassigning a new value to the option." +"Names for the configuration items are optional if a list is defined as can " +"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If " +"you don't specify a name a new entry will simply add a new option to the " +"list. If you specify a name you can override the option in the same way as " +"any other option by reassigning a new value to the option." msgstr "" "Namen für die Konfigurationselemente sind optional, wenn eine Liste, wie sie " "im Beispiel <literal>DPkg::Pre-Install-Pkgs</literal> oberhalb gesehen " @@ -3375,96 +3294,99 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt.conf.5.xml:113 msgid "" -"Two specials are allowed, <literal>#include</literal> (which is deprecated " -"and not supported by alternative implementations) and <literal>#clear</" -"literal>: <literal>#include</literal> will include the given file, unless " -"the filename ends in a slash, then the whole directory is included. " -"<literal>#clear</literal> is used to erase a part of the configuration tree. " -"The specified element and all its descendants are erased. (Note that these " -"lines also need to end with a semicolon.)" -msgstr "" -"Es sind die beiden Spezialfälle <literal>#include</literal> (das missbilligt " -"ist und von alternativen Implementierungen nicht unterstützt wird) und " -"<literal>#clear</literal> erlaubt: <literal>#include</literal> wird die " -"angegebene Datei einfügen außer, wenn der Dateiname mit einem Schrägstrich " -"endet, dann wird das ganze Verzeichnis eingefügt. <literal>#clear</literal> " -"wird benutzt, um einen Teil des Konfigurationsbaums zu löschen. Das " -"angegebene Element und alle davon absteigenden Elemente werden gelöscht. " -"(Beachten Sie, dass diese Zeilen auch mit einem Semikolon enden müssen.)" +"Two special commands are defined: <literal>#include</literal> (which is " +"deprecated and not supported by alternative implementations) and " +"<literal>#clear</literal>. <literal>#include</literal> will include the " +"given file, unless the filename ends in a slash, in which case the whole " +"directory is included. <literal>#clear</literal> is used to erase a part of " +"the configuration tree. The specified element and all its descendants are " +"erased. (Note that these lines also need to end with a semicolon.)" +msgstr "" +"Es sind zwei Spezialbefehle definiert: <literal>#include</literal> (was " +"missbilligt ist und von alternativen Implementierungen nicht unterstützt " +"wird) und <literal>#clear</literal>: <literal>#include</literal> wird die " +"angegebene Datei einfügen, außer, wenn der Dateiname mit einem Schrägstrich " +"endet, in diesem Fall wird das ganze Verzeichnis eingefügt. " +"<literal>#clear</literal> wird benutzt, um einen Teil des Konfigurationsbaums " +"zu löschen. Das angegebene Element und alle davon absteigenden Elemente " +"werden gelöscht. (Beachten Sie, dass diese Zeilen auch mit einem Schrägstrich " +"enden müssen.)" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:121 -msgid "" -"The #clear command is the only way to delete a list or a complete scope. " -"Reopening a scope or the ::-style described below will <emphasis>not</" -"emphasis> override previously written entries. Only options can be " -"overridden by addressing a new value to it - lists and scopes can't be " -"overridden, only cleared." -msgstr "" -"Der #clear-Befehl ist der einzige Weg, eine Liste oder einen kompletten " -"Geltungsbereich zu löschen. Erneutes Öffnen eines Geltungsbereichs oder der " -"unten beschriebene ::-Stil werden vorherige Einträge <emphasis>nicht</" -"emphasis> überschreiben. Optionen können nur überschrieben werden, indem ein " -"neuer Wert an sie adressiert wird – Listen und Geltungsbereiche können nicht " -"überschrieben, sondern nur bereinigt werden." +#: apt.conf.5.xml:123 +msgid "" +"The <literal>#clear</literal> command is the only way to delete a list or a " +"complete scope. Reopening a scope (or using the syntax described below with " +"an appended <literal>::</literal>) will <emphasis>not</emphasis> override " +"previously written entries. Options can only be overridden by addressing a " +"new value to them - lists and scopes can't be overridden, only cleared." +msgstr "" +"Der <literal>#clear</literal>-Befehl ist der einzige Weg, eine Liste oder " +"einen kompletten Geltungsbereich zu löschen. Erneutes Öffnen eines " +"Geltungsbereichs (oder die unten beschriebene Syntax mit angehängten " +"<literal>::</literal>) wird vorherige Einträge <emphasis>nicht</" +"emphasis> außer Kraft setzen. Optionen können nur außer Kraft gesetzt werden, " +"indem ein neuer Wert an sie adressiert wird – Listen und Geltungsbereiche " +"können nicht außer Kraft gesetzt, sondern nur bereinigt werden." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:126 +#: apt.conf.5.xml:131 msgid "" -"All of the APT tools take a -o option which allows an arbitrary " +"All of the APT tools take an -o option which allows an arbitrary " "configuration directive to be specified on the command line. The syntax is a " "full option name (<literal>APT::Get::Assume-Yes</literal> for instance) " "followed by an equals sign then the new value of the option. To append a new " -"element to a list, add a trailing :: to the name of the list. (As you might " -"suspect: The scope syntax can't be used on the command line.)" +"element to a list, add a trailing <literal>::</literal> to the name of the " +"list. (As you might suspect, the scope syntax can't be used on the command " +"line.)" msgstr "" "Alle APT-Werkzeuge bringen eine Option -o mit, die es einer beliebigen " "Konfigurationsdirektiven erlaubt, auf der Befehlszeile angegeben zu werden. " "Die Syntax ist ein vollständiger Optionsname (<literal>APT::Get::Assume-Yes</" "literal> zum Beispiel), gefolgt von einem Gleichheitszeichen und dann dem " "neuen Wert der Option. Um ein neues Element an eine Liste anzuhängen, fügen " -"Sie ein führendes :: an den Namen der Liste. (Wenn Ihnen das merkwürdig " -"vorkommt: Die Geltungsbereichs-Syntax kann nicht auf der Befehlszeile " -"benutzt werden.)" +"Sie ein führendes <literal>::</literal> an den Namen der Liste. (Wenn Ihnen " +"das merkwürdig vorkommt: Die Geltungsbereichssyntax kann nicht auf der " +"Befehlszeile benutzt werden.)" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:133 -msgid "" -"Note that you can use :: only for appending one item per line to a list and " -"that you should not use it in combination with the scope syntax. (The scope " -"syntax implicit insert ::) Using both syntaxes together will trigger a bug " -"which some users unfortunately depend on: An option with the unusual name " -"\"<literal>::</literal>\" which acts like every other option with a name. " -"These introduces many problems including that a user who writes multiple " -"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a " -"list will gain the opposite as only the last assignment for this option " -"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise " -"errors and will stop working if they encounter this misuse, so please " -"correct such statements now as long as APT doesn't complain explicit about " -"them." -msgstr "" -"Beachten Sie, dass Sie :: nur benutzen können, um ein Element pro Zeile an " -"eine Liste anzuhängen und dass Sie es nicht nicht in Verbindung mit einer " -"Geltungsbereichs-Syntax benutzen sollten. (Die Geltungsbereichssysyntax fügt " -"implizit :: ein) Die Benutzung der Syntax von beiden zusammen wird einen " -"Fehler auslösen, auf den sich einige Anwender ungünstigerweise verlassen: " -"eine Option mit dem unüblichen Namen »<literal>::</literal>«, die sich wie " -"jede andere Option mit einem Namen verhält. Dies leitet viele Probleme ein, " -"einschließlich, dass der Anwender, der mehrere Zeilen in dieser " -"<emphasis>falschen</emphasis> Syntax in der Hoffnung etwas an die Liste " -"anzuhängen schreibt, das Gegenteil von nur der letzten Zuweisung zu diese " -"Option »<literal>::</literal>« erreicht. Bevorstehende APT-Versionen werden " -"Fehler ausgeben und die Arbeit stoppen, wenn sie auf diese falsche " -"Verwendung stoßen. Korrigieren Sie deshalb nun solche Anweisungen, solange " -"sich APT nicht explizit darüber beklagt." +#: apt.conf.5.xml:139 +msgid "" +"Note that appending items to a list using <literal>::</literal> only works " +"for one item per line, and that you should not use it in combination with " +"the scope syntax (which adds <literal>::</literal> implicitly). Using both " +"syntaxes together will trigger a bug which some users unfortunately depend " +"on: an option with the unusual name \"<literal>::</literal>\" which acts " +"like every other option with a name. This introduces many problems; for one " +"thing, users who write multiple lines in this <emphasis>wrong</emphasis> " +"syntax in the hope of appending to a list will achieve the opposite, as only " +"the last assignment for this option \"<literal>::</literal>\" will be used. " +"Future versions of APT will raise errors and stop working if they encounter " +"this misuse, so please correct such statements now while APT doesn't " +"explicitly complain about them." +msgstr "" +"Beachten Sie, dass das Anhängen von Elementen an eine Liste mittels " +"<literal>::</literal> nur für ein Element pro Zeile funktioniert, Sie sollten " +"es nicht nicht in Verbindung mit einer Geltungsbereichssyntax benutzen (die " +"»<literal>::</literal>« explizit hinzufügt). Die Benutzung der Syntax von " +"beiden zusammen wird einen Fehler auslösen, auf den sich einige Anwender " +"ungünstigerweise verlassen: eine Option mit dem unüblichen Namen " +"»<literal>::</literal>«, die sich wie jede andere Option mit einem Namen " +"verhält. Dies leitet viele Probleme ein; zum einen werden Anwender, die " +"mehrere Zeilen in dieser <emphasis>falschen</emphasis> Syntax in der Hoffnung " +"etwas an die Liste anzuhängen, schreiben, das Gegenteil erreichen, da nur die " +"letzte Zuweisung zu dieser Option »<literal>::</literal>« benutzt wird. " +"Zukünftige APT-Versionen werden Fehler ausgeben und die Arbeit stoppen, wenn " +"sie auf diese falsche Verwendung stoßen. Korrigieren Sie deshalb nun solche " +"Anweisungen, solange sich APT nicht explizit darüber beklagt." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:145 +#: apt.conf.5.xml:154 msgid "The APT Group" msgstr "Die APT-Gruppe" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:146 +#: apt.conf.5.xml:155 msgid "" "This group of options controls general APT behavior as well as holding the " "options for all of the tools." @@ -3473,7 +3395,7 @@ msgstr "" "wie es die Optionen für alle Werkzeuge enthält." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:151 +#: apt.conf.5.xml:160 msgid "" "System Architecture; sets the architecture to use when fetching files and " "parsing package lists. The internal default is the architecture apt was " @@ -3484,34 +3406,34 @@ msgstr "" "die Architektur für die APT kompiliert wurde." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:157 +#: apt.conf.5.xml:167 msgid "" -"All Architectures the system supports. Processors implementing the " -"<literal>amd64</literal> (also called <literal>x86-64</literal>) instruction " -"set are e.g. also able to execute binaries compiled for the <literal>i386</" -"literal> (<literal>x86</literal>) instruction set; This list is use when " -"fetching files and parsing package lists. The internal default is always the " -"native architecture (<literal>APT::Architecture</literal>) and all foreign " -"architectures it can retrieve by calling <command>dpkg --print-foreign-" -"architectures</command>." +"All Architectures the system supports. For instance, CPUs implementing the " +"<literal>amd64</literal> (also called <literal>x86-64</literal>) " +"instruction set are also able to execute binaries compiled for the " +"<literal>i386</literal> (<literal>x86</literal>) instruction set. This list " +"is used when fetching files and parsing package lists. The initial default " +"is always the system's native architecture (<literal>APT::Architecture</" +"literal>), and foreign architectures are added to the default list when they " +"are registered via <command>dpkg --add-architecture</command>." msgstr "" -"alle Architekturen, die das System unterstützt. Prozessoren, die " +"alle Architekturen, die das System unterstützt. Zum Beispiel sind CPUs, die " "<literal>amd64</literal>-Befehlssätze implementieren (auch <literal>x86-64</" -"literal> genannt) sind beispielsweise ebenso in der Lage, Programme " -"auszuführen, die für <literal>i386</literal>-Befehlssätzt (<literal>x86</" -"literal>) kompiliert wurden. Diese Liste wird benutzt, wenn Dateien " -"abgerufen und Paketlisten ausgewertet werden. Die interne Vorgabe ist immer " -"die native Architektur (<literal>APT::Architecture</literal>) und alle " -"fremden Architekturen, die durch Aufruf von <command>dpkg --print-foreign-" -"architectures</command> abgefragt werden können." +"literal> genannt), ebenso in der Lage, Programme auszuführen, die für " +"<literal>i386</literal>-Befehlssätze (<literal>x86</literal>) kompiliert " +"wurden. Diese Liste wird benutzt, wenn Dateien abgerufen und Paketlisten " +"ausgewertet werden. Die interne Vorgabe ist immer die native Architektur des " +"Systems (<literal>APT::Architecture</literal>) und fremde Architekturen " +"werden der vorgegebenen Liste hinzugefügt, wenn sie per <command>dpkg " +"--print-architectures</command> registriert werden." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:167 +#: apt.conf.5.xml:180 msgid "" -"Default release to install packages from if more than one version available. " -"Contains release name, codename or release version. Examples: 'stable', " -"'testing', 'unstable', '&stable-codename;', '&testing-codename;', '4.0', " -"'5.0*'. See also &apt-preferences;." +"Default release to install packages from if more than one version is " +"available. Contains release name, codename or release version. Examples: " +"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', " +"'4.0', '5.0*'. See also &apt-preferences;." msgstr "" "Standard-Release von dem Pakete installiert werden, wenn mehr als eine " "Version verfügbar ist. Enthält Release-Name, Codename oder Release-Version. " @@ -3519,16 +3441,16 @@ msgstr "" "codename;«, »4.0«, »5.0*«. Siehe auch &apt-preferences;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:173 +#: apt.conf.5.xml:186 msgid "" -"Ignore Held packages; This global option causes the problem resolver to " +"Ignore held packages; this global option causes the problem resolver to " "ignore held packages in its decision making." msgstr "" "Halten von Paketen ignorieren. Diese globale Option veranlasst den " "Problemlöser, gehaltene Pakete beim Treffen von Entscheidungen zu ignorieren." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:178 +#: apt.conf.5.xml:191 msgid "" "Defaults to on. When turned on the autoclean feature will remove any " "packages which can no longer be downloaded from the cache. If turned off " @@ -3543,113 +3465,124 @@ msgstr "" "Möglichkeiten bereitstellt, um sie erneut zu installieren." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:185 -msgid "" -"Defaults to on which will cause APT to install essential and important " -"packages as fast as possible in the install/upgrade operation. This is done " -"to limit the effect of a failing &dpkg; call: If this option is disabled APT " -"does treat an important package in the same way as an extra package: Between " -"the unpacking of the important package A and his configuration can then be " -"many other unpack or configuration calls, e.g. for package B which has no " -"relation to A, but causes the dpkg call to fail (e.g. because maintainer " -"script of package B generates an error) which results in a system state in " -"which package A is unpacked but unconfigured - each package depending on A " -"is now no longer guaranteed to work as their dependency on A is not longer " -"satisfied. The immediate configuration marker is also applied to all " -"dependencies which can generate a problem if the dependencies e.g. form a " -"circle as a dependency with the immediate flag is comparable with a Pre-" -"Dependency. So in theory it is possible that APT encounters a situation in " -"which it is unable to perform immediate configuration, errors out and refers " -"to this option so the user can deactivate the immediate configuration " -"temporarily to be able to perform an install/upgrade again. Note the use of " -"the word \"theory\" here as this problem was only encountered by now in real " -"world a few times in non-stable distribution versions and was caused by " -"wrong dependencies of the package in question or by a system in an already " -"broken state, so you should not blindly disable this option as the mentioned " -"scenario above is not the only problem immediate configuration can help to " -"prevent in the first place. Before a big operation like <literal>dist-" -"upgrade</literal> is run with this option disabled it should be tried to " -"explicitly <literal>install</literal> the package APT is unable to configure " -"immediately, but please make sure to report your problem also to your " -"distribution and to the APT team with the buglink below so they can work on " -"improving or correcting the upgrade process." -msgstr "" -"standardmäßig »on«, wodurch APT veranlasst wird, »essential«- oder " -"»important«-Pakete so schnell wie möglich in der »install«-/»upgrade«-" -"Operation zu installieren. Dies wird getan, um den Effekt eines " -"gescheiterterten &dpkg;-Aufrufs zu begrenzen: Wenn diese Option " -"ausgeschaltet ist, behandelt APT ein »important«-Paket auf die gleiche Weise " -"wie ein »extra«-Paket: Zwischen dem Entpacken des »important«-Pakets A und " -"seiner Konfiguration können dann viele andere Entpack- oder " -"Konfigurationsaufrufe liegen, z.B. für Paket B, das keine Beziehung zu A " -"hat, aber den dpkg-Aufruf zum Scheitern bringt (z.B. weil das Betreuerskript " -"von Paket B Fehler generiert), die als Ergebnis einen Systemstatus haben, in " -"dem Paket A entpackt, aber nicht konfiguriert ist und für kein von A " -"abhängendes Paket länger gewährleistet ist, dass es funktioniert, weil die " -"Abhängigkeit zu A nicht länger befriedigt wird. Das unmittelbare " -"Konfigurationskennzeichen wird außerdem auf alle Abhängigkeiten angewandt, " -"was zu einem Problem führen könnten, falls die Abhängigkeiten z.B. einen " -"Kreis bilden, so dass eine Abhängigkeit mit der Unmittelbarmarkierung mit " -"einer Vorabhängigkeit vergleichbar ist. So ist es theoretisch möglich, dass " -"APT einer Situation begegnet, in der keine unmittelbare Konfiguration " -"durchgeführt, ein Fehler ausgegeben und sich auf diese Option bezogen werden " -"kann, so dass der Anwender die unmittelbare Konfiguration zeitweise " -"deaktivieren kann, um in der Lage zu sein, erneut ein »install«/»upgrade« " -"durchzuführen. Beachten Sie, dass hier das Wort »theoretisch« benutzt wird, " -"denn dieses Problem ist bis jetzt in der Realität nur ein paar mal in " -"unstabilen Distributionsversionen aufgetreten und wurde durch falsche " -"Abhängigkeiten des fraglichen Pakets ausgelöst oder durch ein System in " -"bereits kaputtem Status, so dass Sie diese Option nicht unbesehen abschalten " -"sollten, da das oben erwähnte Szenario nicht das einzige unmittelbare " -"Problem ist, das die Konfiguration überhaupt verhindern sollte. Bevor eine " -"große Operation wie <literal>dist-upgrade</literal> mit dieser " -"ausgeschalteten Option ausgeführt wird, sollte explizit versucht werden, " -"<literal>install</literal> des Pakets durchzuführen. APT ist nicht in der " -"Lage unmittelbar zu konfigurieren, aber stellen Sie sicher, dass Sie Ihr " -"Problem außerdem an Ihre Distribution und an das APT-Team berichten mit " -"nachstehendem Fehlerverweis, so dass es am Verbessern oder Korrigieren des " -"Upgrade-Prozesses arbeiten kann." - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:208 -msgid "" -"Never Enable this option unless you -really- know what you are doing. It " -"permits APT to temporarily remove an essential package to break a Conflicts/" -"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH " -"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the " -"essential packages are not tar, gzip, libc, dpkg, bash or anything that " -"those packages depend on." -msgstr "" -"Schalten Sie diese Option niemals ein, außer wenn Sie -wirklich- wissen, was " -"Sie tun. Es erlaubt APT temporär ein essentielles Paket zu entfernen, um " -"eine Conflicts/Conflicts- oder Conflicts/Pre-Depend-Schleife zwischen zwei " -"essentiellen Paketen zu unterbrechen. SOLCH EINE SCHLEIFE SOLLTE NIEMALS " -"EXISTIEREN UND IST EIN SCHWERWIEGENDER FEHLER. Diese Option wird " -"funktionieren, wenn die essentiellen Pakete nicht tar, gzip, libc, dpkg, " -"bash oder etwas, was davon abhängt, sind." - -# FIXME s/These value/This value/ -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:217 +#: apt.conf.5.xml:199 +msgid "" +"Defaults to on, which will cause APT to install essential and important " +"packages as soon as possible in an install/upgrade operation, in order to " +"limit the effect of a failing &dpkg; call. If this option is disabled, APT " +"treats an important package in the same way as an extra package: between the " +"unpacking of the package A and its configuration there can be many other " +"unpack or configuration calls for other unrelated packages B, C etc. If " +"these cause the &dpkg; call to fail (e.g. because package B's maintainer " +"scripts generate an error), this results in a system state in which package " +"A is unpacked but unconfigured - so any package depending on A is now no " +"longer guaranteed to work, as its dependency on A is no longer satisfied." +msgstr "" +"ist standardmäßig aktiviert, was APT veranlassen wird, essentielle und " +"wichtige Pakete so bald wie möglich in einer " +"Installations-/Aktualisierungstransaktion zu installieren, um die " +"Auswirkungen eines scheiternden &dpkg;-Aufrufs zu begrenzen. Falls diese " +"Option deaktiviert ist, betrachtet APT ein wichtiges Paket auf die gleiche " +"Weise wie ein zusätzliches Paket: Zwischen dem Entpacken des Pakets A und " +"seiner Konfiguration können viele andere Entpack- oder Konfigurationsaufrufe " +"für andere, nicht zugehörige Pakete B, C etc. liegen. Falls dies zum " +"Scheitern des &dpkg;-Aufrufs führt (z.B. weil Betreuerskripte des Pakets B " +"einen Fehler erzeugen), führt dies zu einem Systemstatus, in dem Paket A " +"entpackt, aber nicht konfiguriert ist, daher ist nicht länger gewährleistet, " +"dass irgendein Paket, das von A abhängt, weiter funktioniert, da seine " +"Abhängigkeit von A nicht länger erfüllt wird." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:211 +msgid "" +"The immediate configuration marker is also applied in the potentially " +"problematic case of circular dependencies, since a dependency with the " +"immediate flag is equivalent to a Pre-Dependency. In theory this allows APT " +"to recognise a situation in which it is unable to perform immediate " +"configuration, abort, and suggest to the user that the option should be " +"temporarily deactivated in order to allow the operation to proceed. Note " +"the use of the word \"theory\" here; in the real world this problem has " +"rarely been encountered, in non-stable distribution versions, and was caused " +"by wrong dependencies of the package in question or by a system in an " +"already broken state; so you should not blindly disable this option, as the " +"scenario mentioned above is not the only problem it can help to prevent in " +"the first place." +msgstr "" +"Außerdem wird die unmittelbare Konfigurationsmarkierung im potenziell " +"problematischen Fall zirkulärer Abhängigkeiten angewandt, da eine " +"Abhängigkeit mit der Unmittelbarmarkierung einer Vorabhängigkeit entspricht. " +"Theoretisch ermöglicht dies APT, eine Situation zu erkennen, in der es keine " +"unmittelbare Konfiguration durchführen kann, abzubrechen und dem Anwender " +"vorzuschlagen, dass er die Option zeitweise deaktivieren soll, um ein " +"Fortsetzen der Transaktion zu ermöglichen. Beachten Sie hier das Wort " +"»theoretisch«; im wahren Leben ist dieses Problem selten in unstabilen " +"Distributionsversionen aufgetreten und es wurde durch falsche Abhängigkeiten " +"des fraglichen Pakets verursacht oder durch ein System in einem beschädigten " +"Zustand; daher sollten Sie diese Option nicht blind deaktivieren, da das " +"zuvor erwähnte Szenario nicht das einzige Problem ist, das es an erster " +"Stelle verhindern kann." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:224 +msgid "" +"Before a big operation like <literal>dist-upgrade</literal> is run with this " +"option disabled you should try to explicitly <literal>install</literal> the " +"package APT is unable to configure immediately; but please make sure you " +"also report your problem to your distribution and to the APT team with the " +"buglink below, so they can work on improving or correcting the upgrade " +"process." +msgstr "" +"Bevor eine umfangreiche Transaktion wie <literal>dist-upgrade</literal> mit " +"dieser ausgeschalteten Option ausgeführt wird, sollten Sie versuchen, " +"explizit <literal>install</literal> für das Paket auszuführen, das APT nicht " +"unmittelbar konfigurieren kann. Stellen Sie aber bitte sicher, dass Sie Ihr " +"Problem außerdem an Ihre Distribution und an das APT-Team mit dem " +"Fehlerverweis unten melden, so dass sie an der Verbesserung und Korrektur des " +"Upgrade-Prozesses arbeiten können." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:235 +msgid "" +"Never enable this option unless you <emphasis>really</emphasis> know what " +"you are doing. It permits APT to temporarily remove an essential package to " +"break a Conflicts/Conflicts or Conflicts/Pre-Depends loop between two " +"essential packages. <emphasis>Such a loop should never exist and is a grave " +"bug</emphasis>. This option will work if the essential packages are not " +"<command>tar</command>, <command>gzip</command>, <command>libc</command>, " +"<command>dpkg</command>, <command>dash</command> or anything that those " +"packages depend on." +msgstr "" +"Schalten Sie diese Option niemals ein, außer wenn Sie <emphasis>wirklich</" +"emphasis> wissen, was Sie tun. Es erlaubt APT temporär ein essentielles " +"Paket zu entfernen, um eine Conflicts/Conflicts- oder Conflicts/Pre-Depends-" +"Schleife zwischen zwei essentiellen Paketen zu unterbrechen. <emphasis>Solch " +"eine Schleife sollte niemals existieren und ist ein schwerwiegender Fehler</" +"emphasis>. Diese Option wird funktionieren, wenn die essentiellen Pakete " +"nicht <command>tar</command>, <command>gzip</command>, <command>libc</" +"command>, <command>dpkg</command>, <command>dash</command> oder etwas, was " +"davon abhängt, sind." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:247 msgid "" "APT uses since version 0.7.26 a resizable memory mapped cache file to store " -"the 'available' information. <literal>Cache-Start</literal> acts as a hint " -"to which size the Cache will grow and is therefore the amount of memory APT " +"the available information. <literal>Cache-Start</literal> acts as a hint of " +"the size the cache will grow to, and is therefore the amount of memory APT " "will request at startup. The default value is 20971520 bytes (~20 MB). Note " -"that this amount of space needs to be available for APT otherwise it will " +"that this amount of space needs to be available for APT; otherwise it will " "likely fail ungracefully, so for memory restricted devices this value should " "be lowered while on systems with a lot of configured sources it should be " "increased. <literal>Cache-Grow</literal> defines in bytes with the default " -"of 1048576 (~1 MB) how much the Cache size will be increased in the event " -"the space defined by <literal>Cache-Start</literal> is not enough. These " +"of 1048576 (~1 MB) how much the cache size will be increased in the event " +"the space defined by <literal>Cache-Start</literal> is not enough. This " "value will be applied again and again until either the cache is big enough " "to store all information or the size of the cache reaches the <literal>Cache-" "Limit</literal>. The default of <literal>Cache-Limit</literal> is 0 which " "stands for no limit. If <literal>Cache-Grow</literal> is set to 0 the " -"automatic grow of the cache is disabled." +"automatic growth of the cache is disabled." msgstr "" "APT benutzt seit Version 0.7.26 eine Zwischenspeicherdatei für " -"Speicherabbilder mit veränderlicher Größe um »verfügbare« Informationen zu " +"Speicherabbilder mit veränderlicher Größe um verfügbare Informationen zu " "speichern. <literal>Cache-Start</literal> dient als Hinweis, auf welche " "Größe der Zwischenspeicher wachsen wird und enthält daher den Betrag, " "welchen Speicher APT beim Start abruft. Die Vorgabe ist 20971520 Byte (~20 " @@ -3667,16 +3600,15 @@ msgstr "" "auf 0 gesetzt ist, kann der Zwischenspeicher nicht automatisch wachsen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:233 -msgid "Defines which package(s) are considered essential build dependencies." +#: apt.conf.5.xml:263 +msgid "Defines which packages are considered essential build dependencies." msgstr "" -"definiert, welche(s) Paket(e) als essentielle Bauabhängigkeiten betrachtet " -"werden." +"definiert, welche Pakete als essentielle Bauabhängigkeiten betrachtet werden." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:237 +#: apt.conf.5.xml:267 msgid "" -"The Get subsection controls the &apt-get; tool, please see its documentation " +"The Get subsection controls the &apt-get; tool; please see its documentation " "for more information about the options here." msgstr "" "Der Get-Unterabschnitt steuert das &apt-get;-Werkzeug. Lesen Sie bitte " @@ -3684,9 +3616,9 @@ msgstr "" "erhalten." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:242 +#: apt.conf.5.xml:272 msgid "" -"The Cache subsection controls the &apt-cache; tool, please see its " +"The Cache subsection controls the &apt-cache; tool; please see its " "documentation for more information about the options here." msgstr "" "Der Cache-Unterabschnitt steuert das &apt-cache;-Werkzeug. Lesen Sie bitte " @@ -3694,9 +3626,9 @@ msgstr "" "erhalten." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:247 +#: apt.conf.5.xml:277 msgid "" -"The CDROM subsection controls the &apt-cdrom; tool, please see its " +"The CDROM subsection controls the &apt-cdrom; tool; please see its " "documentation for more information about the options here." msgstr "" "Der CDROM-Unterabschnitt steuert das &apt-cdrom;-Werkzeug. Lesen Sie bitte " @@ -3704,107 +3636,114 @@ msgstr "" "erhalten." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:253 +#: apt.conf.5.xml:283 msgid "The Acquire Group" msgstr "Die Erwerbgruppe" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:254 +#: apt.conf.5.xml:284 msgid "" "The <literal>Acquire</literal> group of options controls the download of " -"packages and the URI handlers." +"packages as well as the various \"acquire methods\" responsible for the " +"download itself (see also &sources-list;)." msgstr "" "Die <literal>Acquire</literal>-Gruppe der Optionen steuert das Herunterladen " -"von Paketen und die URI-Steuerprogramme." - -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:259 -msgid "" -"Security related option defaulting to true as an expiring validation for a " -"Release file prevents longtime replay attacks and can e.g. also help users " -"to identify no longer updated mirrors - but the feature depends on the " -"correctness of the time on the user system. Archive maintainers are " -"encouraged to create Release files with the <literal>Valid-Until</literal> " -"header, but if they don't or a stricter value is volitional the following " -"<literal>Max-ValidTime</literal> option can be used." -msgstr "" -"Die sicherheitsbezogene Option wird als »true« vorgegeben, da eine " -"verfallende Überprüfung für eine Release-Datei langzeitige " -"Wiederholungsangriffe verhindert und zum Beispiel Anwendern auch helfen " -"kann, länger nicht aktualisierte Spiegel zu erkennen – diese Funktion hängt " -"jedoch von der Richtigkeit der Zeiteinstellung auf dem Anwendersystem ab. " -"Archivbetreuer sind aufgefordert Release-Dateien mit der Kopfzeile " -"<literal>Valid-Until</literal> zu erstellen. Falls sie das nicht tun oder " -"ein strengerer Wert gewollt ist, kann die Option <literal>Max-ValidTime</" -"literal> benutzt werden." - -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:270 -msgid "" -"Seconds the Release file should be considered valid after it was created " -"(indicated by the <literal>Date</literal> header). If the Release file " -"itself includes a <literal>Valid-Until</literal> header the earlier date of " -"the two is used as the expiration date. The default value is <literal>0</" -"literal> which stands for \"for ever valid\". Archive specific settings can " -"be made by appending the label of the archive to the option name." -msgstr "" -"Sekunden, die die Release-Datei als gültig betrachtet werden sollte, nachdem " -"sie erzeugt wurde (angezeigt durch die Kopfzeile <literal>Date</literal>). " -"Falls die Release-Datei selbst eine <literal>Valid-Until</literal>-Kopfzeile " +"von Paketen ebenso wie die verschiedenen »Beschaffungsmethoden«, die für das " +"Herunterladen selbst zuständig sind (siehe auch &sources-list;)." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:291 +msgid "" +"Security related option defaulting to true, as giving a Release file's " +"validation an expiration date prevents replay attacks over a long timescale, " +"and can also for example help users to identify mirrors that are no longer " +"updated - but the feature depends on the correctness of the clock on the " +"user system. Archive maintainers are encouraged to create Release files with " +"the <literal>Valid-Until</literal> header, but if they don't or a stricter " +"value is desired the <literal>Max-ValidTime</literal> option below can be " +"used." +msgstr "" +"Die sicherheitsbezogene Option wird als »true« vorgegeben, da es " +"Wiederholungsangriffe über einen langen Zeitraum verhindert, einer " +"Überprüfung für eine Release-Datei ein Ablaufdatum zu geben und zum Beispiel " +"Anwendern auch hilft, länger nicht aktualisierte Spiegel zu erkennen – diese " +"Funktion hängt jedoch von der Richtigkeit der Zeiteinstellung auf dem " +"Anwendersystem ab. Archivbetreuer sind aufgefordert, Release-Dateien mit der " +"Kopfzeile <literal>Valid-Until</literal> zu erstellen. Falls sie das nicht " +"tun oder ein strengerer Wert gewünscht wird, kann die Option " +"<literal>Max-ValidTime</literal> unten benutzt werden." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:304 +msgid "" +"Maximum time (in seconds) after its creation (as indicated by the " +"<literal>Date</literal> header) that the <filename>Release</filename> file " +"should be considered valid. If the Release file itself includes a " +"<literal>Valid-Until</literal> header the earlier date of the two is used as " +"the expiration date. The default value is <literal>0</literal> which stands " +"for \"valid forever\". Archive specific settings can be made by appending " +"the label of the archive to the option name." +msgstr "" +"maximale Zeit (in Sekunden) nach der Erzeugung (die in der Kopfzeile " +"<literal>Date</literal> angegeben ist), die die Datei " +"<filename>Release</filename> als gültig angesehen wird. Falls die " +"Release-Datei selbst eine <literal>Valid-Until</literal>-Kopfzeile " "enthält, wird das frühere der beiden Daten als Ablaufdatum verwandt. Vorgabe " -"ist <literal>0</literal>, was für »für immer gültig« steht. " -"Archivspezifische Einstellungen können durch Anhängen des Archivetiketts an " -"den Optionsnamen vorgenommen werden." +"ist <literal>0</literal>, was für »für immer gültig« steht. Archivspezifische " +"Einstellungen können durch Anhängen der Archivbezeichnung an den Optionsnamen " +"vorgenommen werden." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:281 -msgid "" -"Minimum of seconds the Release file should be considered valid after it was " -"created (indicated by the <literal>Date</literal> header). Use this if you " -"need to use a seldomly updated (local) mirror of a more regular updated " -"archive with a <literal>Valid-Until</literal> header instead of completely " -"disabling the expiration date checking. Archive specific settings can and " -"should be used by appending the label of the archive to the option name." -msgstr "" -"minimale Anzahl der Sekunden, die die Release-Datei als gültig betrachtet " -"werden sollte, nachdem sie erzeugt wurde (angezeigt durch die Kopfzeile " -"<literal>Date</literal>). Benutzen Sie dies, falls Sie einen selten " -"aktualisierten (lokalen) Spiegel eines regelmäßiger aktualisierten Archivs " -"mit einer <literal>Valid-Until</literal>-Kopfzeile haben, anstatt die " -"Überprüfung des Ablaufdatum komplett zu deaktivieren. Archivspezifische " -"Einstellungen können und sollten durch Anhängen des Archivetiketts an den " -"Optionsnamen vorgenommen werden." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:316 +msgid "" +"Minimum time (in seconds) after its creation (as indicated by the " +"<literal>Date</literal> header) that the <filename>Release</filename> file " +"should be considered valid. Use this if you need to use a seldom updated " +"(local) mirror of a more frequently updated archive with a <literal>Valid-" +"Until</literal> header instead of completely disabling the expiration date " +"checking. Archive specific settings can and should be used by appending the " +"label of the archive to the option name." +msgstr "" +"minimale Zeit (in Sekunden), nach der Erzeugung (die in der Kopfzeile " +"<literal>Date</literal> angegeben ist), die die Datei " +"<filename>Release</filename> als gültig angesehen wird. Benutzen Sie dies, " +"falls Sie einen selten aktualisierten (lokalen) Spiegel eines häufiger " +"aktualisierten Archivs mit einer <literal>Valid-Until</literal>-Kopfzeile " +"haben, anstatt die Überprüfung des Ablaufdatums komplett zu deaktivieren. " +"Archivspezifische Einstellungen können und sollten durch Anhängen der " +"Archivbezeichnung an den Optionsnamen vorgenommen werden." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:292 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:328 msgid "" -"Try to download deltas called <literal>PDiffs</literal> for Packages or " -"Sources files instead of downloading whole ones. True by default." +"Try to download deltas called <literal>PDiffs</literal> for indexes (like " +"<filename>Packages</filename> files) instead of downloading whole ones. True " +"by default." msgstr "" -"versucht Deltas, die <literal>PDiffs</literal> genannt werden, für Paket- " -"oder Quelldateien herunterzuladen, statt der kompletten Dateien. Vorgabe ist " -"True." +"versucht Unterschiede, die <literal>PDiffs</literal> genannt werden, für " +"Indexe (wie <filename>Packages</filename>-Dateien) herunterzuladen, statt der " +"kompletten Dateien. Vorgabe ist True." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:295 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:331 msgid "" -"Two sub-options to limit the use of PDiffs are also available: With " -"<literal>FileLimit</literal> can be specified how many PDiff files are " -"downloaded at most to update a file. <literal>SizeLimit</literal> on the " -"other hand is the maximum percentage of the size of all patches compared to " -"the size of the targeted file. If one of these limits is exceeded the " -"complete file is downloaded instead of the patches." +"Two sub-options to limit the use of PDiffs are also available: " +"<literal>FileLimit</literal> can be used to specify a maximum number of " +"PDiff files should be downloaded to update a file. <literal>SizeLimit</" +"literal> on the other hand is the maximum percentage of the size of all " +"patches compared to the size of the targeted file. If one of these limits is " +"exceeded the complete file is downloaded instead of the patches." msgstr "" "Es sind außerdem zwei Unteroptionen verfügbar, um die Benutzung von PDiffs " -"zu begrenzen: Mit <literal>FileLimit</literal> kann angegeben werden, wie " -"viele PDiff-Dateien höchstens heruntergeladen werden, um eine Datei zu " -"aktualisieren. Andererseits gibt <literal>SizeLimit</literal> die maximale " -"Prozentzahl der Größe aller Patches im Vergleich zur Zieldatei an. Wenn eine " -"dieser Begrenzungen überschritten wird, wird die komplette Datei anstelle " -"der Patche heruntergeladen." +"zu begrenzen: <literal>FileLimit</literal> kann verwandt werden, um die " +"maximale Anzahl von PDiff-Dateien anzugeben, die zum Aktualisieren einer " +"Datei heruntergeladen werden sollen. Andererseits gibt " +"<literal>SizeLimit</literal> die maximale Prozentzahl der Größe aller Patches " +"im Vergleich zur Zieldatei an. Wenn eine dieser Begrenzungen überschritten " +"wird, wird die komplette Datei anstelle der Patche heruntergeladen." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:305 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:341 msgid "" "Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</" "literal> or <literal>access</literal> which determines how APT parallelizes " @@ -3819,8 +3758,8 @@ msgstr "" "geöffnet wird, <literal>access</literal> bedeutet, dass eine Verbindung pro " "URI-Art geöffnet wird." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:313 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:349 msgid "" "Number of retries to perform. If this is non-zero APT will retry failed " "files the given number of times." @@ -3828,8 +3767,8 @@ msgstr "" "Anzahl der auszuführenden erneuten Versuche. Wenn dies nicht Null ist, wird " "APT fehlgeschlagene Dateien in der angegebenen Zahl erneut versuchen." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:318 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:354 msgid "" "Use symlinks for source archives. If set to true then source archives will " "be symlinked when possible instead of copying. True is the default." @@ -3838,67 +3777,63 @@ msgstr "" "ist, werden Quellarchive, wenn möglich, symbolisch verknüpft, anstatt " "kopiert zu werden. True ist die Vorgabe." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:323 -msgid "" -"HTTP URIs; http::Proxy is the default http proxy to use. It is in the " -"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per " -"host proxies can also be specified by using the form <literal>http::Proxy::" -"<host></literal> with the special keyword <literal>DIRECT</literal> " -"meaning to use no proxies. If no one of the above settings is specified, " -"<envar>http_proxy</envar> environment variable will be used." -msgstr "" -"HTTP-URIs; http::Proxy ist der zu benutzende Standard-HTTP-Proxy. Er wird " -"standardmäßig in der Form <literal>http://[[Anwender][:Passwort]@]Host[:" -"Port]/</literal> angegeben. Durch Host-Proxies kann außerdem in der Form " -"<literal>http::Proxy::<host></literal> mit dem speziellen " -"Schlüsselwort <literal>DIRECT</literal> angegeben werden, dass keine Proxies " -"benutzt werden. Falls keine der obigen Einstellungen angegeben wurde, wird " -"die Umgebungsvariable <envar>http_proxy</envar> benutzt." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:359 +msgid "" +"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. " +"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</" +"literal>. Per host proxies can also be specified by using the form " +"<literal>http::Proxy::<host></literal> with the special keyword " +"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above " +"settings is specified, <envar>http_proxy</envar> environment variable will " +"be used." +msgstr "" +"<literal>http::Proxy</literal> ist der zu benutzende Standard-HTTP-Proxy. Er " +"wird standardmäßig in der Form " +"<literal>http://[[Anwender][:Passwort]@]Rechner[:Port]/</literal> angegeben. " +"Durch Rechner-Proxies kann außerdem in der Form " +"<literal>http::Proxy::<host></literal> mit dem speziellen Schlüsselwort " +"<literal>DIRECT</literal> angegeben werden, dass keine Proxies benutzt " +"werden. Falls keine der obigen Einstellungen angegeben wurde, wird die " +"Umgebungsvariable <envar>http_proxy</envar> benutzt." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:331 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:367 msgid "" "Three settings are provided for cache control with HTTP/1.1 compliant proxy " -"caches. <literal>No-Cache</literal> tells the proxy to not use its cached " -"response under any circumstances, <literal>Max-Age</literal> is sent only " -"for index files and tells the cache to refresh its object if it is older " -"than the given number of seconds. Debian updates its index files daily so " -"the default is 1 day. <literal>No-Store</literal> specifies that the cache " -"should never store this request, it is only set for archive files. This may " -"be useful to prevent polluting a proxy cache with very large .deb files. " -"Note: Squid 2.0.2 does not support any of these options." -msgstr "" -"Für die Steuerung des Zwischenspeichers mit HTTP/1.1-konformen Proxy-" -"Zwischenspeichern stehen drei Einstellungen zur Verfügung. <literal>No-" -"Cache</literal> teilt dem Proxy mit, dass er unter keinen Umständen seine " -"zwischengespeicherten Antworten benutzen soll, <literal>Max-Age</literal> " -"wird nur für Indexdateien gesendet und sagt dem Zwischenspeicher, dass er " -"seine Objekte erneuern soll, die älter als die angegebene Zahl in Sekunden " -"sind. Debian aktualisiert seine Indexdateien täglich, so dass die Vorgabe " -"ein Tag ist. <literal>No-Store</literal> gibt an, dass der Zwischenspeicher " -"diese Anfragen niemals speichern soll, es ist nur für Archivdateien gesetzt. " -"Dies könnte nützlich sein, um Verunreinigungen des Proxy-Zwischenspeichers " -"mit sehr großen .deb-Dateien zu verhindern. Beachten Sie: Squid 2.0.2 " -"unterstützt keine dieser Optionen." - -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:341 apt.conf.5.xml:407 +"caches. <literal>No-Cache</literal> tells the proxy not to use its cached " +"response under any circumstances. <literal>Max-Age</literal> sets the " +"allowed maximum age (in seconds) of an index file in the cache of the " +"proxy. <literal>No-Store</literal> specifies that the proxy should not " +"store the requested archive files in its cache, which can be used to prevent " +"the proxy from polluting its cache with (big) .deb files." +msgstr "" +"Für die Steuerung des Zwischenspeichers mit HTTP/1.1-konformen " +"Proxy-Zwischenspeichern stehen drei Einstellungen zur Verfügung. " +"<literal>No-Cache</literal> teilt dem Proxy mit, dass er unter keinen " +"Umständen seine zwischengespeicherten Antworten benutzen soll, " +"<literal>Max-Age</literal> setzt das maximal erlaubte Alter einer Indexdatei " +"im Zwischenspeicher des Proxys (in Sekunden). <literal>No-Store</literal> " +"gibt an, dass der Proxy die angefragten Archivdateien nicht in seinem " +"Zwischenspeicher ablegen soll. Das kann verwandt werden, um zu verhindern, " +"dass der Proxy seinen Zwischenspeicher mit (großen) .deb-Dateien verunreinigt." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:377 apt.conf.5.xml:449 msgid "" "The option <literal>timeout</literal> sets the timeout timer used by the " -"method, this applies to all things including connection timeout and data " -"timeout." +"method; this value applies to the connection as well as the data timeout." msgstr "" -"Die Option <literal>timeout</literal> stellt den Zeitnehmer für die " -"Zeitüberschreitung ein, die von der Methode benutzt wird. Dies wird auf alle " -"Dinge, einschließlich Verbindungs- und Datenzeitüberschreitungen, angewandt." +"Die Option <literal>timeout</literal> stellt den Zeitnehmer, der von der " +"Methode benutzt wird. Dieser Wert wird auf die Verbindungs- sowie die " +"Datenzeitüberschreitungen angewandt." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:344 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:380 msgid "" "The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to " -"enabled HTTP pipeling (RFC 2616 section 8.1.2.2) which can be beneficial e." -"g. on high-latency connections. It specifies how many requests are send in a " +"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e." +"g. on high-latency connections. It specifies how many requests are sent in a " "pipeline. Previous APT versions had a default of 10 for this setting, but " "the default value is now 0 (= disabled) to avoid problems with the ever-" "growing amount of webservers and proxies which choose to not conform to the " @@ -3913,33 +3848,33 @@ msgstr "" "anwachsenden Zahl von Webservern und Proxies zu vermeiden, die nicht der " "HTTP/1.1-Spezifikation entsprechen." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:351 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:387 msgid "" -"<literal>Acquire::http::AllowRedirect</literal> controls if APT will follow " -"redirects, which is enabled by default." +"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will " +"follow redirects, which is enabled by default." msgstr "" "<literal>Acquire::http::AllowRedirect</literal> steuert, ob APT Umleitungen " "folgen wird, was standardmäßig aktiviert ist." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:354 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:390 msgid "" "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</" -"literal> which accepts integer values in kilobyte. The default value is 0 " -"which deactivates the limit and tries uses as much as possible of the " -"bandwidth (Note that this option implicit deactivates the download from " -"multiple servers at the same time.)" +"literal> which accepts integer values in kilobytes. The default value is 0 " +"which deactivates the limit and tries to use all available bandwidth (note " +"that this option implicitly disables downloading from multiple servers at " +"the same time.)" msgstr "" "Die benutzte Bandbreite kann durch <literal>Acquire::http::Dl-Limit</" "literal> eingeschränkt werden, was Ganzzahlwerte in Kilobyte akzeptiert. Der " -"Vorgabewert ist 0, was die Beschränkung ausschaltet und versucht, soviel wie " -"möglich von der Bandbreite zu benutzen. (Beachten Sie, dass diese Optionen " +"Vorgabewert ist 0, was die Beschränkung ausschaltet und versucht, sämtliche " +"verfügbare Bandbreite zu benutzen. (Beachten Sie, dass diese Optionen " "implizit das Herunterladen von mehreren Servern zur gleichen Zeit " "deaktiviert.)" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:359 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:395 msgid "" "<literal>Acquire::http::User-Agent</literal> can be used to set a different " "User-Agent for the http download method as some proxies allow access for " @@ -3950,81 +3885,87 @@ msgstr "" "einige Proxys den Clients nur dann Zugriff gewähren, wenn der Client einen " "bekannten Bezeichner verwendet." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:366 -msgid "" -"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy " -"options are the same as for <literal>http</literal> method and will also " -"default to the options from the <literal>http</literal> method if they are " -"not explicitly set for https. <literal>Pipeline-Depth</literal> option is " -"not supported yet." -msgstr "" -"HTTPS-URIs. Zwischenspeichersteuerung-, Zeitüberschreitung-, AllowRedirect-, " -"Dl-Limit- und Proxy-Optionen entsprechen denen der <literal>http</literal>-" -"Methode und werden auch für die Optionen der Methode <literal>http</literal> " -"vorgegeben, falls sie nicht explizit für HTTPS gesetzt sind. Die Option " +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:403 +msgid "" +"The <literal>Cache-control</literal>, <literal>Timeout</literal>, " +"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and " +"<literal>proxy</literal> options work for HTTPS URIs in the same way as for " +"the <literal>http</literal> method, and default to the same values if they " +"are not explicitly set. The <literal>Pipeline-Depth</literal> option is not " +"yet supported." +msgstr "" +"Die Optionen <literal>Cache-control</literal>, <literal>Timeout</literal>, " +"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> und " +"<literal>proxy</literal> funktionieren für HTTPS-URIs auf die gleiche Weise " +"wie für die Methode <literal>http</literal> und haben die gleichen " +"Vorgabewerte, falls sie nicht explizit gesetzt wurden. Die Option " "<literal>Pipeline-Depth</literal> wird noch nicht unterstützt." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:372 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:411 msgid "" "<literal>CaInfo</literal> suboption specifies place of file that holds info " -"about trusted certificates. <literal><host>::CaInfo</literal> is " +"about trusted certificates. <literal><host>::CaInfo</literal> is the " "corresponding per-host option. <literal>Verify-Peer</literal> boolean " -"suboption determines whether verify server's host certificate against " -"trusted certificates or not. <literal><host>::Verify-Peer</literal> " -"is corresponding per-host option. <literal>Verify-Host</literal> boolean " -"suboption determines whether verify server's hostname or not. <literal><" -"host>::Verify-Host</literal> is corresponding per-host option. " -"<literal>SslCert</literal> determines what certificate to use for client " -"authentication. <literal><host>::SslCert</literal> is corresponding " -"per-host option. <literal>SslKey</literal> determines what private key to " -"use for client authentication. <literal><host>::SslKey</literal> is " -"corresponding per-host option. <literal>SslForceVersion</literal> overrides " -"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. " -"<literal><host>::SslForceVersion</literal> is corresponding per-host " -"option." +"suboption determines whether or not the server's host certificate should be " +"verified against trusted certificates. <literal><host>::Verify-Peer</" +"literal> is the corresponding per-host option. <literal>Verify-Host</" +"literal> boolean suboption determines whether or not the server's hostname " +"should be verified. <literal><host>::Verify-Host</literal> is the " +"corresponding per-host option. <literal>SslCert</literal> determines what " +"certificate to use for client authentication. <literal><host>::" +"SslCert</literal> is the corresponding per-host option. <literal>SslKey</" +"literal> determines what private key to use for client authentication. " +"<literal><host>::SslKey</literal> is the corresponding per-host " +"option. <literal>SslForceVersion</literal> overrides default SSL version to " +"use. It can contain either of the strings '<literal>TLSv1</literal>' or " +"'<literal>SSLv3</literal>'. <literal><host>::SslForceVersion</" +"literal> is the corresponding per-host option." msgstr "" "Die Unteroption <literal>CaInfo</literal> gibt den Ort an, an dem " "Informationen über vertrauenswürdige Zertifikate bereitgehalten werden. " -"<literal><host>::CaInfo</literal> ist die entsprechende per-Host-" -"Option. Die boolsche Unteroption <literal>Verify-Peer</literal> entscheidet, " -"ob das Host-Zertifikat des Servers mit den vertrauenswürdigen Zertifikaten " -"geprüft wird oder nicht. <literal><host>::Verify-Peer</literal> ist " -"die entsprechende per-Host-Option. Die boolsche Unteroption <literal>Verify-" -"Host</literal> entscheidet, ob der Host-Name des Servers geprüft wird oder " -"nicht. <literal><host>::Verify-Host</literal> ist die entsprechende " -"per-Host-Option. <literal>SslCert</literal> entscheidet, welches Zertifikat " -"zur Client-Authentifizierung benutzt wird. <literal><host>::SslCert</" -"literal> ist die entsprechende per-Host-Option. <literal>SslKey</literal> " -"entscheidet, welche privaten Schlüssel für die Client-Authentifizierung " -"benutzt werden. <literal><host>::SslKey</literal> ist die " -"entsprechende per-Host-Option. <literal>SslForceVersion</literal> " -"überschreibt die zu benutzende Standard-SSL-Version. Es kann die " -"Zeichenketten »TLSv1« oder »SSLv3« enthalten. <literal><host>::" -"SslForceVersion</literal> ist die entsprechende per-Host-Option." - -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:391 -msgid "" -"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard " -"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host " -"proxies can also be specified by using the form <literal>ftp::Proxy::<" -"host></literal> with the special keyword <literal>DIRECT</literal> " -"meaning to use no proxies. If no one of the above settings is specified, " -"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp " -"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in " -"the configuration file. This entry specifies the commands to send to tell " -"the proxy server what to connect to. Please see &configureindex; for an " -"example of how to do this. The substitution variables available are <literal>" -"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>" -"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</" -"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's " -"respective URI component." -msgstr "" -"FTP-URIs; ftp::Proxy ist der zu benutzende Standard-FTP-Proxy. Er wird " -"standardmäßig in der Form <literal>ftp://[[Anwender][:Passwort]@]Host[:Port]/" -"</literal> angegeben. per-Host-Proxys kann außerdem in der Form " +"<literal><host>::CaInfo</literal> ist die entsprechende Option pro " +"Rechner. Die boolsche Unteroption <literal>Verify-Peer</literal> entscheidet, " +"ob das Rechnerzertifikat des Servers mit den vertrauenswürdigen Zertifikaten " +"geprüft werden soll oder nicht. <literal><host>::Verify-Peer</literal> " +"ist die entsprechende Option pro Rechner. Die boolsche Unteroption " +"<literal>Verify-Host</literal> entscheidet, ob der Rechnername des Servers " +"geprüft werden soll oder nicht. <literal><host>::Verify-Host</literal> " +"ist die entsprechende Option pro Rechner. <literal>SslCert</literal> " +"entscheidet, welches Zertifikat zur Client-Authentifizierung benutzt wird. " +"<literal><host>::SslCert</literal> ist die entsprechende " +"Option pro Rechner. <literal>SslKey</literal> entscheidet, welcher private " +"Schlüssel für die Client-Authentifizierung benutzt werden. " +"<literal><host>::SslKey</literal> ist die entsprechende Option pro " +"Rechner. <literal>SslForceVersion</literal> überschreibt die zu " +"benutzende Standard-SSL-Version. Es kann die beiden Zeichenketten " +"»<literal>TLSv1</literal>« oder »<literal>SSLv3</literal>« enthalten. Die " +"entsprechende Option pro Rechner ist " +"<literal><host>::SslForceVersion</literal>." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:432 +msgid "" +"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. " +"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</" +"literal>. Per host proxies can also be specified by using the form " +"<literal>ftp::Proxy::<host></literal> with the special keyword " +"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above " +"settings is specified, <envar>ftp_proxy</envar> environment variable will be " +"used. To use an FTP proxy you will have to set the <literal>ftp::ProxyLogin</" +"literal> script in the configuration file. This entry specifies the commands " +"to send to tell the proxy server what to connect to. Please see " +"&configureindex; for an example of how to do this. The substitution " +"variables representing the corresponding URI component are <literal>" +"$(PROXY_USER)</literal>, <literal>$(PROXY_PASS)</literal>, <literal>" +"$(SITE_USER)</literal>, <literal>$(SITE_PASS)</literal>, <literal>$(SITE)</" +"literal> and <literal>$(SITE_PORT)</literal>." +msgstr "" +"<literal>ftp::Proxy</literal> setzt den Standard-Proxy, der für FTP-URIs " +"benutzt werden soll. Er wird standardmäßig in der Form " +"<literal>ftp://[[Anwender][:Passwort]@]Rechner[:Port]/</literal> angegeben. " +"Proxys pro Rechner können außerdem in der Form " "<literal>ftp::Proxy::<host></literal> angegeben werden. Hierbei " "bedeutet das spezielle Schlüsselwort <literal>DIRECT</literal>, dass keine " "Proxys benutzt werden. Falls keine der obigen Einstellungen angegeben wurde, " @@ -4032,35 +3973,35 @@ msgstr "" "Proxy zu benutzen, müssen Sie in der Konfigurationsdatei das Skript " "<literal>ftp::ProxyLogin</literal> setzen. Dieser Eintrag gibt die Befehle " "an, die gesendet werden müssen, um dem Proxy-Server mitzuteilen, womit er " -"sich verbinden soll. Um ein Beispiel zu erhalten, wie das gemacht wird, " -"lesen Sie bitte &configureindex;. Die Platzhaltervariablen sind <literal>" -"$(PROXY_USER)</literal>, <literal>$(PROXY_PASS)</literal>, <literal>" -"$(SITE_USER)</literal>, <literal>$(SITE_PASS)</literal>, <literal>$(SITE)</" -"literal> und <literal>$(SITE_PORT)</literal>. Jede wird von ihrem " -"entsprechenden URI-Bestandteil genommen." +"sich verbinden soll. Ein Beispiel, wie das funktioniert, finden Sie unter " +"&configureindex;. Die Platzhaltervariablen, die für den zugehörigen " +"URI-Bestandteil stehen, sind <literal>$(PROXY_USER)</literal>, " +"<literal>$(PROXY_PASS)</literal>, <literal>$(SITE_USER)</literal>, " +"<literal>$(SITE_PASS)</literal>, <literal>$(SITE)</literal> und " +"<literal>$(SITE_PORT)</literal>." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:410 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:452 msgid "" "Several settings are provided to control passive mode. Generally it is safe " -"to leave passive mode on, it works in nearly every environment. However " -"some situations require that passive mode be disabled and port mode ftp used " -"instead. This can be done globally, for connections that go through a proxy " -"or for a specific host (See the sample config file for examples)." +"to leave passive mode on; it works in nearly every environment. However, " +"some situations require that passive mode be disabled and port mode FTP used " +"instead. This can be done globally or for connections that go through a " +"proxy or for a specific host (see the sample config file for examples)." msgstr "" "Mehrere Einstellungen werden zum Steuern des passiven Modus bereitgestellt. " "Generell ist es sicher, den passiven Modus eingeschaltet zu lassen, er " "funktioniert in nahezu jeder Umgebung. Jedoch erfordern einige Situationen, " "dass der passive Modus ausgeschaltet und stattdessen Port-Modus-FTP benutzt " -"wird. Dies kann global für Verbindungen gemacht werden, die durch einen " -"Proxy oder über einen bestimmten Host gehen (Lesen Sie die " -"Beispielskonfiguration, um Beispiele zu erhalten)." +"wird. Dies kann global gemacht werden oder für Verbindungen, die durch einen " +"Proxy oder über einen bestimmten Rechner gehen (Beispiele finden Sie in der " +"Musterkonfigurationsdatei)." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:417 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:459 msgid "" "It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</" -"envar> environment variable to a http url - see the discussion of the http " +"envar> environment variable to an HTTP URL - see the discussion of the http " "method above for syntax. You cannot set this in the configuration file and " "it is not recommended to use FTP over HTTP due to its low efficiency." msgstr "" @@ -4070,8 +4011,8 @@ msgstr "" "nicht in der Konfigurationsdatei setzen und es wird wegen der geringen " "Effizienz nicht empfohlen FTP über HTTP zu benutzen." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:422 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:464 msgid "" "The setting <literal>ForceExtended</literal> controls the use of RFC2428 " "<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is " @@ -4086,59 +4027,58 @@ msgstr "" "Benutzung selbst auf IPv4-Verbindungen. Beachten Sie, dass die wenigsten FTP-" "Server RFC2428 unterstützen." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:435 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:478 #, no-wrap msgid "/cdrom/::Mount \"foo\";" msgstr "/cdrom/::Mount \"foo\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:430 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:473 msgid "" -"CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, " -"<literal>cdrom::Mount</literal> which must be the mount point for the CD-ROM " -"drive as specified in <filename>/etc/fstab</filename>. It is possible to " -"provide alternate mount and unmount commands if your mount point cannot be " -"listed in the fstab (such as an SMB mount and old mount packages). The " +"For URIs using the <literal>cdrom</literal> method, the only configurable " +"option is the mount point, <literal>cdrom::Mount</literal>, which must be " +"the mount point for the CD-ROM (or DVD, or whatever) drive as specified in " +"<filename>/etc/fstab</filename>. It is possible to provide alternate mount " +"and unmount commands if your mount point cannot be listed in the fstab. The " "syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the " -"cdrom block. It is important to have the trailing slash. Unmount commands " -"can be specified using UMount." -msgstr "" -"CD-ROM-URIs; Die einzige Einstellung für CD-ROM-URIs ist der Einhängepunkt " -"<literal>cdrom::Mount</literal>, der der Einhängepunkt des CD-ROM-Laufwerks " -"sein muss, wie er in <filename>/etc/fstab</filename> angegeben wurde. Es ist " -"möglich alternative Ein- und Aushängebefehle anzugeben, falls Ihr " -"Einhängepunkt nicht in der fstab aufgelistet werden kann (so wie beim " -"Einhängen per SMB und alten Mount-Paketen). Die Syntax besteht darin, " -"<placeholder type=\"literallayout\" id=\"0\"/> in den CD-ROM-Block " -"einzufügen. Der abschließende Schrägstrich ist wichtig. Aushängebefehle " -"können per UMount angegeben werden." +"<literal>cdrom</literal> block. It is important to have the trailing slash. " +"Unmount commands can be specified using UMount." +msgstr "" +"Für URIs, die die Methode <literal>cdrom</literal> verwenden, ist die einzige " +"Option der Einhängepunkt, <literal>cdrom::Mount</literal>, der der " +"Einhängepunkt des CD-ROM-Laufwerks sein muss (oder der DVD oder was auch " +"immer), wie er in <filename>/etc/fstab</filename> angegeben wurde. Es ist " +"möglich, alternative Ein- und Aushängebefehle anzugeben, falls Ihr " +"Einhängepunkt nicht in der fstab aufgeführt werden kann. Die Syntax besteht " +"darin, <placeholder type=\"literallayout\" id=\"0\"/> in den " +"<literal>cdrom</literal>-Block einzufügen. Der abschließende Schrägstrich ist " +"wichtig. Aushängebefehle können per UMount angegeben werden." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:441 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:486 msgid "" -"GPGV URIs; the only option for GPGV URIs is the option to pass additional " -"parameters to gpgv. <literal>gpgv::Options</literal> Additional options " -"passed to gpgv." +"For GPGV URIs the only configurable option is <literal>gpgv::Options</" +"literal>, which passes additional parameters to gpgv." msgstr "" -"GPGV-URIs; Die einzige Option für GPGV-URIs ist die Option zusätzliche " -"Parameter an gpgv weiterzuleiten. <literal>gpgv::Options</literal> " -"Zusätzliche Parameter werden an gpgv weitergeleitet." +"Die einzige Konfigurationsoption für GPGV-URIs ist " +"<literal>gpgv::Options</literal>, um zusätzliche Parameter an Gpgv " +"weiterzuleiten." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:452 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:497 #, no-wrap msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";" msgstr "Acquire::CompressionTypes::<replaceable>Dateierweiterung</replaceable> \"<replaceable>Methodenname</replaceable>\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:447 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:492 msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " -"compression formats. Per default the acquire methods can decompress " +"compression formats. By default the acquire methods can decompress " "<command>bzip2</command>, <command>lzma</command> and <command>gzip</" -"command> compressed files, with this setting more formats can be added on " +"command> compressed files; with this setting more formats can be added on " "the fly or the used method can be changed. The syntax for this is: " "<placeholder type=\"synopsis\" id=\"0\"/>" msgstr "" @@ -4151,83 +4091,85 @@ msgstr "" "Methode geändert werden. Die Syntax dafür lautet: <placeholder type=" "\"synopsis\" id=\"0\"/>" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:457 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:502 #, no-wrap msgid "Acquire::CompressionTypes::Order:: \"gz\";" msgstr "Acquire::CompressionTypes::Order:: \"gz\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis> -#: apt.conf.5.xml:460 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> +#: apt.conf.5.xml:505 #, no-wrap msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:453 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:498 msgid "" -"Also the <literal>Order</literal> subgroup can be used to define in which " +"Also, the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " "acquire system will try the first and proceed with the next compression type " -"in this list on error, so to prefer one over the other type simple add the " -"preferred type at first - not already added default types will be added at " -"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" +"in this list on error, so to prefer one over the other type simply add the " +"preferred type first - default types not already added will be implicitly " +"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" "\"0\"/> can be used to prefer <command>gzip</command> compressed files over " "<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" "command> should be preferred over <command>gzip</command> and " -"<command>bzip2</command> the configure setting should look like this " +"<command>bzip2</command> the configure setting should look like this: " "<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " -"<literal>bz2</literal> explicit to the list as it will be added automatic." +"<literal>bz2</literal> to the list explicitly as it will be added " +"automatically." msgstr "" "Außerdem kann die Untergruppe <literal>Order</literal> benutzt werden, um zu " -"definieren, in welcher Reihenfolge das »acquire«-System die komprimierten " -"Dateien herunterzuladen versucht. Das »acquire«-System wird die erste " -"versuchen und mit dem nächsten Kompressionstyp in dieser Liste bei einem " -"Fehler fortfahren. Um daher einen nach dem anderen Typ vorzuziehen, fügen " -"Sie einfach den bevorzugten Typ zuerst in die Liste – noch nicht " -"hinzugefügte Standardtypen werden zur Laufzeit an das Ende der Liste " -"angehängt, so kann z.B. <placeholder type=\"synopsis\" id=\"0\"/> verwandt " -"werden, um <command>gzip</command>-komprimierte Dateien über <command>bzip2</" -"command> und <command>lzma</command> zu bevorzugen. Falls <command>lzma</" -"command> vor <command>gzip</command> und <command>bzip2</command> vorgezogen " -"werden soll, sollte die Konfigurationseinstellung so aussehen: <placeholder " -"type=\"synopsis\" id=\"1\"/>. Es ist nicht nötig <literal>bz2</literal> " -"explizit zur Liste hinzuzufügen, da es automatisch hinzufügt wird." - -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:464 +"definieren, in welcher Reihenfolge das Beschaffungssystem die komprimierten " +"Dateien herunterzuladen versucht. Das Beschaffungssystem wird die erste " +"ausprobieren und bei einem Fehler mit dem nächsten Kompressionstyp in dieser " +"Liste fortfahren. Um daher einen Typ einem anderen vorzuziehen, fügen Sie " +"einfach den bevorzugten Typ an erster Stelle in die Liste ein – noch nicht " +"hinzugefügte Standardtypen werden implizit an das Ende der Liste angehängt, " +"so kann z.B. <placeholder type=\"synopsis\" id=\"0\"/> verwandt werden, um " +"<command>gzip</command>-komprimierte Dateien gegenüber " +"<command>bzip2</command> und <command>lzma</command> zu bevorzugen. Falls " +"<command>lzma</command> vor <command>gzip</command> und " +"<command>bzip2</command> bevorzugt werden soll, sollte die " +"Konfigurationseinstellung so aussehen: <placeholder type=\"synopsis\" " +"id=\"1\"/>. Es ist nicht nötig, <literal>bz2</literal> explizit zur Liste " +"hinzuzufügen, da es automatisch hinzufügt wird." + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout> +#: apt.conf.5.xml:512 #, no-wrap msgid "Dir::Bin::bzip2 \"/bin/bzip2\";" msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:462 -msgid "" -"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</" -"replaceable></literal> will be checked: If this setting exists the method " -"will only be used if this file exists, e.g. for the bzip2 method (the " -"inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note " -"also that list entries specified on the command line will be added at the " -"end of the list specified in the configuration files, but before the default " -"entries. To prefer a type in this case over the ones specified in the " -"configuration files you can set the option direct - not in list style. This " -"will not override the defined list, it will only prefix the list with this " -"type." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:507 +msgid "" +"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" +"literal> will be checked at run time. If this option has been set, the " +"method will only be used if this file exists; e.g. for the <literal>bzip2</" +"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout" +"\" id=\"0\"/> Note also that list entries specified on the command line will " +"be added at the end of the list specified in the configuration files, but " +"before the default entries. To prefer a type in this case over the ones " +"specified in the configuration files you can set the option direct - not in " +"list style. This will not override the defined list; it will only prefix " +"the list with this type." msgstr "" "Beachten Sie, dass <literal>Dir::Bin::<replaceable>Methodenname</" -"replaceable></literal> zur Laufzeit geprüft wird: Falls diese Einstellung " -"existiert, wird die Methode nur benutzt, wenn die Datei existiert, z.B. ist " -"die Einstellung für die (integrierte) bzip2-Methode: <placeholder type=" -"\"literallayout\" id=\"0\"/>. Beachten Sie auch, dass auf der Befehlszeile " -"eingegebenen Einträge an das Ende der Liste angehängt werden, die in den " -"Konfigurationsdateien angegeben wurde, aber vor den Vorgabeeinträgen. Um " -"einen Typ in diesem Fall gegenüber einem, der über die Konfigurationsdatei " -"angegebenen wurde, zu bevorzugen, können Sie diese Option direkt setzen – " -"nicht im Listenstil. Dies wird die definierte Liste nicht überschreiben, es " -"wird diesen Typ nur vor die Liste setzen." +"replaceable></literal> zur Laufzeit geprüft wird. Falls diese Option gesetzt " +"ist, wird die Methode nur benutzt, wenn die Datei existiert, z.B. ist die " +"integrierte Einstellung für die <literal>bzip2</literal>-Methode: " +"<placeholder type=\"literallayout\" id=\"0\"/>. Beachten Sie auch, dass auf " +"der Befehlszeile eingegebene Einträge an das Ende der Liste angehängt " +"werden, die in den Konfigurationsdateien angegeben wurde, aber vor den " +"Standardeinträgen. Um einen Typ in diesem Fall gegenüber einem, der über die " +"Konfigurationsdatei angegebenen wurde, zu bevorzugen, können Sie diese Option " +"direkt setzen – nicht im Listenstil. Dies wird die definierte Liste nicht " +"überschreiben, es wird diesen Typ nur vor die Liste setzen." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:469 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:517 msgid "" "The special type <literal>uncompressed</literal> can be used to give " "uncompressed files a preference, but note that most archives don't provide " @@ -4238,8 +4180,8 @@ msgstr "" "die meisten Archive keine unkomprimierten Dateien bereitstellen, so dass " "dies meist nur für lokale Spiegel benutzt werden kann." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:476 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:524 msgid "" "When downloading <literal>gzip</literal> compressed indexes (Packages, " "Sources, or Translations), keep them gzip compressed locally instead of " @@ -4252,55 +4194,52 @@ msgstr "" "CPU-Ressourcen bei der Erstellung des lokalen Paket-Caches. Vorgabe ist " "False." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:484 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:532 msgid "" "The Languages subsection controls which <filename>Translation</filename> " -"files are downloaded and in which order APT tries to display the Description-" -"Translations. APT will try to display the first available Description in the " -"Language which is listed at first. Languages can be defined with their short " -"or long Languagecodes. Note that not all archives provide " -"<filename>Translation</filename> files for every Language - especially the " -"long Languagecodes are rare, so please inform you which ones are available " -"before you set here impossible values." -msgstr "" -"Der Unterabschnitt Languages steuert welche <filename>Translation</filename>-" +"files are downloaded and in which order APT tries to display the description-" +"translations. APT will try to display the first available description in the " +"language which is listed first. Languages can be defined with their short or " +"long language codes. Note that not all archives provide " +"<filename>Translation</filename> files for every language - the long " +"language codes are especially rare." +msgstr "" +"Der Unterabschnitt Languages steuert, welche <filename>Translation</filename>-" "Dateien heruntergeladen werden und in welcher Reihenfolge APT versucht, die " "Beschreibungsübersetzungen anzuzeigen. APT wird versuchen, die erste " "verfügbare Beschreibung für die zuerst aufgelistete Sprache anzuzeigen. " "Sprachen können durch ihre kurzen oder langen Sprachcodes definiert sein. " -"Beachten Sie, dass nicht alle Archive <filename>Translation</filename>-" -"Dateien für jede Sprache bereitstellen, besonders lange Sprachcodes sind " -"selten. Informieren Sie sich deshalb bitte welche verfügbar sind, bevor Sie " -"hier unmögliche Werte einsetzen." +"Beachten Sie, dass nicht alle Archive " +"<filename>Translation</filename>-Dateien für jede Sprache bereitstellen – " +"insbesondere sind die langen Sprachcodes selten." -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting> -#: apt.conf.5.xml:500 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting> +#: apt.conf.5.xml:549 #, no-wrap msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" msgstr "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:490 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:537 msgid "" "The default list includes \"environment\" and \"en\". " -"\"<literal>environment</literal>\" has a special meaning here: It will be " -"replaced at runtime with the languagecodes extracted from the " +"\"<literal>environment</literal>\" has a special meaning here: it will be " +"replaced at runtime with the language codes extracted from the " "<literal>LC_MESSAGES</literal> environment variable. It will also ensure " "that these codes are not included twice in the list. If " "<literal>LC_MESSAGES</literal> is set to \"C\" only the " "<filename>Translation-en</filename> file (if available) will be used. To " -"force apt to use no Translation file use the setting <literal>Acquire::" +"force APT to use no Translation file use the setting <literal>Acquire::" "Languages=none</literal>. \"<literal>none</literal>\" is another special " -"meaning code which will stop the search for a fitting <filename>Translation</" -"filename> file. This can be used by the system administrator to let APT " -"know that it should download also this files without actually use them if " -"the environment doesn't specify this languages. So the following example " -"configuration will result in the order \"en, de\" in an english and in \"de, " -"en\" in a german localization. Note that \"fr\" is downloaded, but not used " -"if APT is not used in a french localization, in such an environment the " -"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=" -"\"0\"/>" +"meaning code which will stop the search for a suitable " +"<filename>Translation</filename> file. This tells APT to download these " +"translations too, without actually using them unless the environment " +"specifies the languages. So the following example configuration will result " +"in the order \"en, de\" in an English locale or \"de, en\" in a German one. " +"Note that \"fr\" is downloaded, but not used unless APT is used in a French " +"locale (where the order would be \"fr, de, en\"). <placeholder type=" +"\"programlisting\" id=\"0\"/>" msgstr "" "Die Standardliste beinhaltet »environment« und »en«. »<literal>environment</" "literal>« hat hier eine besondere Bedeutung: Es wird zur Laufzeit durch die " @@ -4309,21 +4248,21 @@ msgstr "" "nicht zweimal in der Liste enthalten sind. Falls <literal>LC_MESSAGES</" "literal> auf »C« gesetzt ist, wird nur die Datei <filename>Translation-en</" "filename> (falls verfügbar) benutzt. Um APT zu zwingen, keine " -"Übersetzungsdatei zu benutzen, benutzen Sie die Einstellung " +"Übersetzungsdatei zu verwenden, benutzen Sie die Einstellung " "<literal>Acquire::Languages=none</literal>. »<literal>none</literal>« ist " "ein weiterer Code mit besonderer Bedeutung, der die Suche nach einer " -"passenden <filename>Translation</filename>-Datei stoppen wird. Dies kann vom " -"Systemadministrator benutzt werden, um APT mitzuteilen, dass es auch diese " -"Dateien herunterladen soll ohne sie aktuell zu benutzen, falls die " -"Umgebungsvariable diese Sprachen nicht angibt. Daher wird die folgende " -"Beispielkonfiguration in der Reihenfolge »en,de« zu einer englischen und »de," -"en« zu einer deutschen Lokalisierung führen. Beachten Sie, dass »fr« " -"heruntergeladen, aber nicht benutzt wird, falls APT nicht in einer " -"französischen Lokalisierung benutzt wird. In einer solchen Umgebung wäre die " -"Reihenfolge »fr, de, en«. <placeholder type=\"programlisting\" id=\"0\"/>" +"passenden <filename>Translation</filename>-Datei stoppen wird. Dies weist " +"APT an, diese Übersetzungen auch herunterzuladen, ohne sie tatsächlich zu " +"verwenden, es sei denn, die Umgebungsvariable gibt diese Sprachen an. Daher " +"wird die folgende Beispielkonfiguration in einer englischen Lokalisierung " +"zu der Reihenfolge »en,de« und in einer deutschen Lokalisierung zu »de,en« " +"führen. Beachten Sie, dass »fr« heruntergeladen, aber nicht benutzt wird, " +"falls APT nicht in einer französischen Lokalisierung benutzt wird (wobei die " +"Reihenfolge »fr, de, en« wäre). <placeholder type=\"programlisting\" " +"id=\"0\"/>" -#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:501 +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml:550 msgid "" "Note: To prevent problems resulting from APT being executed in different " "environments (e.g. by different users or by other programs) all Translation " @@ -4337,55 +4276,55 @@ msgstr "" "Liste hinzugefügt (nach einem impliziten »<literal>none</literal>«)." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:512 +#: apt.conf.5.xml:560 msgid "Directories" msgstr "Verzeichnisse" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:514 +#: apt.conf.5.xml:562 msgid "" "The <literal>Dir::State</literal> section has directories that pertain to " "local state information. <literal>lists</literal> is the directory to place " "downloaded package lists in and <literal>status</literal> is the name of the " -"dpkg status file. <literal>preferences</literal> is the name of the APT " +"&dpkg; status file. <literal>preferences</literal> is the name of the APT " "<filename>preferences</filename> file. <literal>Dir::State</literal> " -"contains the default directory to prefix on all sub items if they do not " +"contains the default directory to prefix on all sub-items if they do not " "start with <filename>/</filename> or <filename>./</filename>." msgstr "" "Der <literal>Dir::State</literal>-Abschnitt hat Verzeichnisse, die zu " "lokalen Statusinformationen gehören. <literal>lists</literal> ist das " "Verzeichnis, in das heruntergeladene Paketlisten platziert werden und " -"<literal>status</literal> ist der Name der Dpkg-Statusdatei. " +"<literal>status</literal> ist der Name der &dpkg; Statusdatei. " "<literal>preferences</literal> ist der Name der APT-<filename>preferences</" "filename>-Datei. <literal>Dir::State</literal> enthält das " "Standardverzeichnis, das allen Unterelementen vorangestellt wird, falls sie " "nicht mit <filename>/</filename> oder <filename>./</filename> beginnen." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:521 +#: apt.conf.5.xml:569 msgid "" "<literal>Dir::Cache</literal> contains locations pertaining to local cache " "information, such as the two package caches <literal>srcpkgcache</literal> " "and <literal>pkgcache</literal> as well as the location to place downloaded " "archives, <literal>Dir::Cache::archives</literal>. Generation of caches can " -"be turned off by setting their names to be blank. This will slow down " -"startup but save disk space. It is probably preferred to turn off the " +"be turned off by setting their names to the empty string. This will slow " +"down startup but save disk space. It is probably preferable to turn off the " "pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the " "default directory is contained in <literal>Dir::Cache</literal>" msgstr "" "<literal>Dir::Cache</literal> enthält Orte, die zu lokalen " "Zwischenspeicherinformationen gehören, so wie die beiden " "Paketzwischenspeicher <literal>srcpkgcache</literal> und <literal>pkgcache</" -"literal>, sowie der Ort, an den heruntergeladene Archive platziert werden, " +"literal>, sowie den Ort, an den heruntergeladene Archive platziert werden, " "<literal>Dir::Cache::archives</literal>. Die Generierung von " -"Zwischenspeichern kann ausgeschaltet werden, indem ihre Namen leer gelassen " -"werden. Dies wird den Start verlangsamen, aber Plattenplatz sparen. Es ist " -"vermutlich vorzuziehen, statt des »srcpkgcache«s den »pkgcache« " -"auszuschalten. Wie <literal>Dir::State</literal> ist das Standardverzeichnis " -"in <literal>Dir::Cache</literal> enthalten." +"Zwischenspeichern kann ausgeschaltet werden, indem ihre Namen auf leere " +"Zeichenketten gesetzt werden. Dies wird den Start verlangsamen, aber " +"Plattenplatz sparen. Es ist vermutlich vorzuziehen, statt des »srcpkgcache«s " +"den »pkgcache« auszuschalten. Wie <literal>Dir::State</literal> ist das " +"Standardverzeichnis in <literal>Dir::Cache</literal> enthalten." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:530 +#: apt.conf.5.xml:578 msgid "" "<literal>Dir::Etc</literal> contains the location of configuration files, " "<literal>sourcelist</literal> gives the location of the sourcelist and " @@ -4400,7 +4339,7 @@ msgstr "" "Konfigurationsdatei erfolgt)." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:536 +#: apt.conf.5.xml:584 msgid "" "The <literal>Dir::Parts</literal> setting reads in all the config fragments " "in lexical order from the directory specified. After this is done then the " @@ -4412,7 +4351,7 @@ msgstr "" "geladen." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:540 +#: apt.conf.5.xml:588 msgid "" "Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::" "Bin::Methods</literal> specifies the location of the method handlers and " @@ -4430,7 +4369,7 @@ msgstr "" "Programms an." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:548 +#: apt.conf.5.xml:596 msgid "" "The configuration item <literal>RootDir</literal> has a special meaning. If " "set, all paths in <literal>Dir::</literal> will be relative to " @@ -4450,7 +4389,7 @@ msgstr "" "<filename>/tmp/staging/var/lib/dpkg/status</filename> nachgesehen." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:561 +#: apt.conf.5.xml:609 msgid "" "The <literal>Ignore-Files-Silently</literal> list can be used to specify " "which files APT should silently ignore while parsing the files in the " @@ -4468,15 +4407,15 @@ msgstr "" "diese Muster verwandt werden." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:570 +#: apt.conf.5.xml:618 msgid "APT in DSelect" msgstr "APT in DSelect" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:572 +#: apt.conf.5.xml:620 msgid "" "When APT is used as a &dselect; method several configuration directives " -"control the default behaviour. These are in the <literal>DSelect</literal> " +"control the default behavior. These are in the <literal>DSelect</literal> " "section." msgstr "" "Wenn APT als eine &dselect;-Methode benutzt wird, steuern mehrere " @@ -4484,43 +4423,48 @@ msgstr "" "<literal>DSelect</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:577 +#: apt.conf.5.xml:625 msgid "" -"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto " -"and never. always and prompt will remove all packages from the cache after " -"upgrading, prompt (the default) does so conditionally. auto removes only " -"those packages which are no longer downloadable (replaced with a new version " -"for instance). pre-auto performs this action before downloading new " -"packages." +"Cache Clean mode; this value may be one of <literal>always</literal>, " +"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</" +"literal> and <literal>never</literal>. <literal>always</literal> and " +"<literal>prompt</literal> will remove all packages from the cache after " +"upgrading, <literal>prompt</literal> (the default) does so conditionally. " +"<literal>auto</literal> removes only those packages which are no longer " +"downloadable (replaced with a new version for instance). <literal>pre-auto</" +"literal> performs this action before downloading new packages." msgstr "" -"Zwischenspeicherbereinigungsmodus; Dieser Wert kann entweder »always«, " -"»prompt«, »auto«, »pre-auto« oder »never« sein. »always« und »prompt« " -"werden, nachdem das Upgrade durchgeführt wurde, alle Pakete aus dem " -"Zwischenspeicher entfernen, »prompt« (die Vorgabe) tut dies bedingt. »auto« " -"entfernt nur jene Pakete, die nicht länger heruntergeladen werden können " -"(zum Beispiel, weil sie durch eine neue Version ersetzt wurden). »pre-auto« " -"führt diese Aktion vor dem Herunterladen neuer Pakete durch." +"Zwischenspeicherbereinigungsmodus; Dieser Wert kann entweder " +"»<literal>always</literal>«, »<literal>prompt</literal>«, »<literal>auto</" +"literal>«, »<literal>pre-auto</literal>« oder »<literal>never</literal>« " +"sein. »<literal>always</literal>« und »<literal>prompt</literal>« werden, " +"nachdem das Upgrade durchgeführt wurde, alle Pakete aus dem Zwischenspeicher " +"entfernen, »<literal>prompt</literal>« (die Vorgabe) tut dies bedingt. " +"»<literal>auto</literal>« entfernt nur jene Pakete, die nicht länger " +"heruntergeladen werden können (zum Beispiel, weil sie durch eine neue " +"Version ersetzt wurden). »<literal>pre-auto</literal>« führt diese Aktion " +"vor dem Herunterladen neuer Pakete durch." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:586 +#: apt.conf.5.xml:639 msgid "" -"The contents of this variable is passed to &apt-get; as command line options " -"when it is run for the install phase." +"The contents of this variable are passed to &apt-get; as command line " +"options when it is run for the install phase." msgstr "" "Die Inhalte dieser Variablen werden als Befehlszeilenoptionen an &apt-get; " "übermittelt, wenn es für die Installationsphase durchlaufen wird." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:591 +#: apt.conf.5.xml:644 msgid "" -"The contents of this variable is passed to &apt-get; as command line options " -"when it is run for the update phase." +"The contents of this variable are passed to &apt-get; as command line " +"options when it is run for the update phase." msgstr "" "Die Inhalte dieser Variable werden als Befehlszeilenoptionen an &apt-get; " "übermittelt, wenn es für die Aktualisierungsphase durchlaufen wird." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:596 +#: apt.conf.5.xml:649 msgid "" "If true the [U]pdate operation in &dselect; will always prompt to continue. " "The default is to prompt only on error." @@ -4529,12 +4473,12 @@ msgstr "" "nachfragen, um fortzufahren. Vorgabe ist es, nur bei Fehlern nachzufragen." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:602 -msgid "How APT calls dpkg" -msgstr "Wie APT Dpkg aufruft" +#: apt.conf.5.xml:655 +msgid "How APT calls &dpkg;" +msgstr "Wie APT &dpkg; aufruft" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:603 +#: apt.conf.5.xml:656 msgid "" "Several configuration directives control how APT invokes &dpkg;. These are " "in the <literal>DPkg</literal> section." @@ -4543,22 +4487,22 @@ msgstr "" "stehen im Abschnitt <literal>DPkg</literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:608 +#: apt.conf.5.xml:661 msgid "" -"This is a list of options to pass to dpkg. The options must be specified " +"This is a list of options to pass to &dpkg;. The options must be specified " "using the list notation and each list item is passed as a single argument to " "&dpkg;." msgstr "" -"Dies ist eine Liste von Optionen, die an Dpkg übermittelt werden. Die " +"Dies ist eine Liste von Optionen, die an &dpkg; übermittelt werden. Die " "Optionen müssen unter Benutzung der Listenschreibweise angegeben werden und " "jedes Listenelement wird als einzelnes Argument an &dpkg; übermittelt." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:614 +#: apt.conf.5.xml:667 msgid "" "This is a list of shell commands to run before/after invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " -"commands are invoked in order using <filename>/bin/sh</filename>, should any " +"commands are invoked in order using <filename>/bin/sh</filename>; should any " "fail APT will abort." msgstr "" "Dies ist eine Liste von Shell-Befehlen, die vor/nach dem Aufruf von &dpkg; " @@ -4568,24 +4512,23 @@ msgstr "" "APT abgebrochen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:621 +#: apt.conf.5.xml:674 msgid "" -"This is a list of shell commands to run before invoking dpkg. Like " +"This is a list of shell commands to run before invoking &dpkg;. Like " "<literal>options</literal> this must be specified in list notation. The " -"commands are invoked in order using <filename>/bin/sh</filename>, should any " -"fail APT will abort. APT will pass to the commands on standard input the " -"filenames of all .deb files it is going to install, one per line." +"commands are invoked in order using <filename>/bin/sh</filename>; should any " +"fail APT will abort. APT will pass the filenames of all .deb files it is " +"going to install to the commands, one per line on standard input." msgstr "" -"Dies ist eine Liste von Shell-Befehlen, die vor dem Aufruf von Dpkg " +"Dies ist eine Liste von Shell-Befehlen, die vor dem Aufruf von &dpkg; " "ausgeführt werden. Wie <literal>options</literal> muss dies in " "Listenschreibweise angegeben werden. Die Befehle werden der Reihenfolge nach " "mit <filename>/bin/sh</filename> aufgerufen, sollte einer fehlschlagen, wird " -"APT abgebrochen. APT wird den Befehlen auf der Standardeingabe die " -"Dateinamen aller .deb-Dateien, die es installieren wird, übergeben, einen " -"pro Zeile." +"APT abgebrochen. APT wird den Befehlen die Dateinamen aller .deb-Dateien, die " +"es installieren wird, auf der Standardeingabe übergeben, einen pro Zeile." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:627 +#: apt.conf.5.xml:680 msgid "" "Version 2 of this protocol dumps more information, including the protocol " "version, the APT configuration space and the packages, files and versions " @@ -4601,18 +4544,18 @@ msgstr "" "literal> gegeben wird." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:635 +#: apt.conf.5.xml:688 msgid "" -"APT chdirs to this directory before invoking dpkg, the default is <filename>/" -"</filename>." +"APT chdirs to this directory before invoking &dpkg;, the default is " +"<filename>/</filename>." msgstr "" -"APT wechselt mit chdir in dieses Verzeichnis, bevor Dpkg aufgerufen wird, " +"APT wechselt mit chdir in dieses Verzeichnis, bevor &dpkg; aufgerufen wird, " "die Vorgabe ist <filename>/</filename>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:640 +#: apt.conf.5.xml:693 msgid "" -"These options are passed to &dpkg-buildpackage; when compiling packages, the " +"These options are passed to &dpkg-buildpackage; when compiling packages; the " "default is to disable signing and produce all binaries." msgstr "" "Diese Optionen werden an &dpkg-buildpackage; beim Kompilieren von Paketen " @@ -4620,39 +4563,39 @@ msgstr "" "Programme werden erstellt." #. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml:645 +#: apt.conf.5.xml:698 msgid "dpkg trigger usage (and related options)" msgstr "Dpkd-Trigger-Benutzung (und zugehörige Optionen)" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:646 -msgid "" -"APT can call dpkg in a way so it can make aggressive use of triggers over " -"multiple calls of dpkg. Without further options dpkg will use triggers only " -"in between his own run. Activating these options can therefore decrease the " -"time needed to perform the install / upgrade. Note that it is intended to " -"activate these options per default in the future, but as it changes the way " -"APT calling dpkg drastically it needs a lot more testing. <emphasis>These " -"options are therefore currently experimental and should not be used in " -"productive environments.</emphasis> Also it breaks the progress reporting so " -"all frontends will currently stay around half (or more) of the time in the " -"100% state while it actually configures all packages." -msgstr "" -"APT kann Dpkg auf eine Art aufrufen, in der aggressiv Gebrauch von Triggern " -"über mehrere Dpkg-Aufrufe hinweg gemacht wird. Ohne weitere Optionen wird " -"Dpkg Trigger nur während seiner eigenen Ausführung benutzen. Diese Optionen " -"zu benutzen, kann daher die zum Installieren/Upgrade benötigte Zeit " -"verkürzen. Beachten Sie, dass geplant ist, diese Optionen in Zukunft " -"standardmäßig zu aktivieren, aber da es die Art, wie APT Dpkg aufruft, " -"drastisch ändert, benötigt es noch viele weitere Tests. <emphasis>Diese " -"Optionen sind daher aktuell noch experimentell und sollten nicht in " -"produktiven Umgebungen benutzt werden.</emphasis> Außerdem unterbricht es " -"die Fortschrittsanzeige, so dass alle Oberflächen derzeit die halbe (oder " -"mehr) Zeit auf dem Status 100% stehen, während tatsächlich alle Pakete " -"konfiguriert werden." +#: apt.conf.5.xml:699 +msgid "" +"APT can call &dpkg; in such a way as to let it make aggressive use of " +"triggers over multiple calls of &dpkg;. Without further options &dpkg; will " +"use triggers once each time it runs. Activating these options can therefore " +"decrease the time needed to perform the install or upgrade. Note that it is " +"intended to activate these options per default in the future, but as it " +"drastically changes the way APT calls &dpkg; it needs a lot more testing. " +"<emphasis>These options are therefore currently experimental and should not " +"be used in production environments.</emphasis> It also breaks progress " +"reporting such that all front-ends will currently stay around half (or more) " +"of the time in the 100% state while it actually configures all packages." +msgstr "" +"APT kann &dpkg; auf eine Art aufrufen, in der aggressiv Gebrauch von Triggern " +"über mehrere &dpkg;-Aufrufe hinweg gemacht wird. Ohne weitere Optionen wird " +"&dpkg; Trigger nur einmal bei jeder Ausführung benutzen. Diese Optionen zu " +"aktivieren, kann daher die zum Installieren oder Upgrade benötigte Zeit " +"verkürzen. Beachten Sie, dass geplant ist, diese Optionen in " +"Zukunft standardmäßig zu aktivieren, aber da es die Art, wie APT &dpkg; " +"aufruft, drastisch ändert, benötigt es noch viele weitere Tests. " +"<emphasis>Diese Optionen sind daher aktuell noch experimentell und sollten " +"nicht in produktiven Umgebungen benutzt werden.</emphasis> Außerdem " +"unterbricht es die Fortschrittsanzeige, so dass alle Oberflächen derzeit die " +"halbe (oder mehr) Zeit auf dem Status 100% stehen, während tatsächlich alle " +"Pakete konfiguriert werden." #. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml:661 +#: apt.conf.5.xml:714 #, no-wrap msgid "" "DPkg::NoTriggers \"true\";\n" @@ -4666,15 +4609,15 @@ msgstr "" "DPkg::TriggersPending \"true\";" #. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml:655 +#: apt.conf.5.xml:708 msgid "" "Note that it is not guaranteed that APT will support these options or that " "these options will not cause (big) trouble in the future. If you have " "understand the current risks and problems with these options, but are brave " -"enough to help testing them create a new configuration file and test a " +"enough to help testing them, create a new configuration file and test a " "combination of options. Please report any bugs, problems and improvements " "you encounter and make sure to note which options you have used in your " -"reports. Asking dpkg for help could also be useful for debugging proposes, " +"reports. Asking &dpkg; for help could also be useful for debugging proposes, " "see e.g. <command>dpkg --audit</command>. A defensive option combination " "would be <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" @@ -4686,72 +4629,75 @@ msgstr "" "von Optionen. Bitte berichten Sie auf Englisch jegliche Fehler, Probleme und " "Verbesserungen, denen Sie begegnen und stellen Sie sicher, dass Sie alle von " "Ihnen benutzten Optionen in Ihren Berichten vermerken. Zum Zweck der " -"Fehlersuche könnte es außerdem nützlich sein, Dpkg um Hilfe zu fragen. Lesen " -"Sie z.B. <command>dpkg --audit</command>. Eine defensive Optionenkombination " -"wäre <placeholder type=\"literallayout\" id=\"0\"/>" +"Fehlersuche könnte es außerdem nützlich sein, &dpkg; um Hilfe zu fragen. " +"Lesen Sie z.B. <command>dpkg --audit</command>. Eine defensive " +"Optionenkombination wäre <placeholder type=\"literallayout\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:668 +#: apt.conf.5.xml:721 msgid "" -"Add the no triggers flag to all dpkg calls (except the ConfigurePending " +"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " "call). See &dpkg; if you are interested in what this actually means. In " -"short: dpkg will not run the triggers when this flag is present unless it is " -"explicitly called to do so in an extra call. Note that this option exists " -"(undocumented) also in older apt versions with a slightly different meaning: " -"Previously these option only append --no-triggers to the configure calls to " -"dpkg - now apt will add these flag also to the unpack and remove calls." -msgstr "" -"fügt die keine-Trigger-Markierung zu allen Dpkg-Aufrufen hinzu (ausgenommen " -"den ConfigurePending-Aufruf). Siehe &dpkg;, wenn Sie interessiert sind, was " -"dies tatsächlich bedeutet. In Kürze: Dpkg wird die Trigger nicht ausführen, " -"dann ist diese Markierung vorhanden, außer sie wird explizit aufgerufen, um " -"dies in einem gesonderten Aufruf zu tun. Beachten Sie, dass diese Option " -"außerdem in älteren APT-Versionen mit einer geringfügig anderen Bedeutung " -"existiert (nicht dokumentiert): Vorher hing diese Option nur --no-triggers " -"an die Konfigurationsaufrufe für Dpkg an – nun wird APT diese Markierung " -"außerdem an die »unpack«- und »remove«-Aufrufe anhängen." +"short: &dpkg; will not run the triggers when this flag is present unless it " +"is explicitly called to do so in an extra call. Note that this option " +"exists (undocumented) also in older APT versions with a slightly different " +"meaning: Previously these option only append --no-triggers to the configure " +"calls to &dpkg; - now APT will also add this flag to the unpack and remove " +"calls." +msgstr "" +"fügt die keine-Trigger-Markierung zu allen &dpkg; Aufrufen hinzu " +"(ausgenommen den ConfigurePending-Aufruf). Siehe &dpkg;, wenn Sie " +"interessiert sind, was dies tatsächlich bedeutet. In Kürze: &dpkg; wird die " +"Trigger nicht ausführen, dann ist diese Markierung vorhanden, außer sie wird " +"explizit aufgerufen, um dies in einem gesonderten Aufruf zu tun. Beachten " +"Sie, dass diese Option außerdem in älteren APT-Versionen mit einer " +"geringfügig anderen Bedeutung existiert (nicht dokumentiert): Vorher hing " +"diese Option nur --no-triggers an die Konfigurationsaufrufe für &dpkg; an – " +"nun wird APT diese Markierung außerdem an die »unpack«- und »remove«-Aufrufe " +"anhängen." #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:676 +#: apt.conf.5.xml:729 msgid "" "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " -"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default " -"value and causes APT to configure all packages explicit. The " -"\"<literal>smart</literal>\" way is it to configure only packages which need " -"to be configured before another package can be unpacked (Pre-Depends) and " -"let the rest configure by dpkg with a call generated by the next option. " -"\"<literal>no</literal>\" on the other hand will not configure anything and " -"totally rely on dpkg for configuration (which will at the moment fail if a " -"Pre-Depends is encountered). Setting this option to another than the all " -"value will implicitly activate also the next option per default as otherwise " -"the system could end in an unconfigured status which could be unbootable!" +"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>" +"\", which causes APT to configure all packages. The \"<literal>smart</" +"literal>\" way is to configure only packages which need to be configured " +"before another package can be unpacked (Pre-Depends), and let the rest be " +"configured by &dpkg; with a call generated by the ConfigurePending option " +"(see below). On the other hand, \"<literal>no</literal>\" will not configure " +"anything, and totally relies on &dpkg; for configuration (which at the " +"moment will fail if a Pre-Depends is encountered). Setting this option to " +"any value other than <literal>all</literal> will implicitly also activate " +"the next option by default, as otherwise the system could end in an " +"unconfigured and potentially unbootable state." msgstr "" "Gültige Werte sind »<literal>all</literal>«, »<literal>smart</literal>« und " -"»<literal>no</literal>«. »<literal>all</literal>« ist der Vorgabewert und " -"veranlasst APT alle Pakete explizit zu konfigurieren. Die Art von " +"»<literal>no</literal>«. Der Standardwert ist »<literal>all</literal>«, was " +"APT veranlasst, alle Pakete zu konfigurieren. Die Art von " "»<literal>smart</literal>« ist es, nur die Pakete zu konfigurieren, die " -"konfiguriert werden müssen, bevor eine anderes Paket entpackt (Pre-Depends) " -"werden kann und den Rest von Dpkg mit einem Aufruf, der von der nächsten " -"Option generiert wurde, konfigurieren zu lassen. Im Gegensatz dazu wird " -"»<literal>no</literal>« nicht konfigurieren und völlig die Konfiguration von " -"Dpkg weitergeben (die in dem Moment fehlschlägt, in dem ein Pre-Depends " -"vorkommt). Diese Option auf etwas anderes als all zu setzen, wird außerdem " -"implizit standardmäßig die nächste Option aktivieren, da das System " -"anderenfalls in einem nicht konfigurierten Status enden könnte, der nicht " -"mehr startbar sein könnte." +"konfiguriert werden müssen, bevor ein anderes Paket entpackt werden kann " +"(Pre-Depends), und den Rest von &dpkg; mit einem Aufruf, der durch die Option " +"ConfigurePending (siehe unten) generiert wurde, konfigurieren zu lassen. Im " +"Gegensatz dazu wird »<literal>no</literal>« nichts konfigurieren und sich " +"völlig auf die Konfiguration durch &dpkg; verlassen (was im Moment " +"fehlschlägt, falls ein Pre-Depends vorkommt). Diese Option auf etwas anderes " +"als <literal>all</literal> zu setzen, wird außerdem implizit standardmäßig " +"die nächste Option aktivieren, da das System anderenfalls in einem nicht " +"konfigurierten Status enden könnte und möglicherweise nicht mehr startbar ist." #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:687 +#: apt.conf.5.xml:744 msgid "" -"If this option is set apt will call <command>dpkg --configure --pending</" -"command> to let dpkg handle all required configurations and triggers. This " -"option is activated automatic per default if the previous option is not set " -"to <literal>all</literal>, but deactivating could be useful if you want to " -"run APT multiple times in a row - e.g. in an installer. In these sceneries " -"you could deactivate this option in all but the last run." +"If this option is set APT will call <command>dpkg --configure --pending</" +"command> to let &dpkg; handle all required configurations and triggers. This " +"option is activated automatically per default if the previous option is not " +"set to <literal>all</literal>, but deactivating it could be useful if you " +"want to run APT multiple times in a row - e.g. in an installer. In these " +"sceneries you could deactivate this option in all but the last run." msgstr "" "Wenn diese Option gesetzt ist, wird APT <command>dpkg --configure --pending</" -"command> aufrufen, um Dpkg alle benötigten Konfigurationen und Trigger " +"command> aufrufen, um &dpkg; alle benötigten Konfigurationen und Trigger " "handhaben zu lassen. Diese Option ist als Vorgabe automatisch aktiviert, " "wenn die vorherige Option nicht auf <literal>all</literal> gesetzt ist, aber " "Deaktivieren könnte nützlich sein, wenn Sie APT mehrmals hintereinander " @@ -4760,13 +4706,13 @@ msgstr "" "deaktivieren." #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:694 +#: apt.conf.5.xml:751 msgid "" -"Useful for <literal>smart</literal> configuration as a package which has " -"pending triggers is not considered as <literal>installed</literal> and dpkg " -"treats them as <literal>unpacked</literal> currently which is a dealbreaker " -"for Pre-Dependencies (see debbugs #526774). Note that this will process all " -"triggers, not only the triggers needed to configure this package." +"Useful for the <literal>smart</literal> configuration as a package which has " +"pending triggers is not considered as <literal>installed</literal>, and " +"&dpkg; treats them as <literal>unpacked</literal> currently which is a " +"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will " +"process all triggers, not only the triggers needed to configure this package." msgstr "" "nützlich für <literal>smart</literal>-Konfiguration, da ein Paket mit " "ausstehenden Triggern nicht als <literal>installed</literal> angesehen wird " @@ -4775,27 +4721,8 @@ msgstr "" "Trigger ausführt, nicht nur die Trigger, die zum Konfigurieren dieses Pakets " "benötigt werden." -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:700 -msgid "" -"As the configuration can be deferred to be done at the end by dpkg it can be " -"tried to order the unpack series only by critical needs, e.g. by Pre-" -"Depends. Default is true and therefore the \"old\" method of ordering in " -"various steps by everything. While both method were present in earlier APT " -"versions the <literal>OrderCritical</literal> method was unused, so this " -"method is very experimental and needs further improvements before becoming " -"really useful." -msgstr "" -"Da die Konfiguration an das Ende von Dpkg verschoben werden kann, kann " -"versucht werden, nur die Entpackserien von kritischen Notwendigkeiten, z.B. " -"von Pre-Depends, anzuweisen. Vorgabe ist true und daher die »alte« Methode " -"zum Sortieren nach allem in mehreren Schritten. Obwohl in früheren Versionen " -"von APT beide Methoden enthalten waren, wurde die <literal>OrderCritical</" -"literal>-Methode nicht benutzt, so dass diese Methode sehr experimentell ist " -"und weitere Verbesserungen benötigt, bevor sie wirklich nützlich wird." - #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml:715 +#: apt.conf.5.xml:764 #, no-wrap msgid "" "OrderList::Score {\n" @@ -4813,41 +4740,41 @@ msgstr "" "};" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:708 -msgid "" -"Essential packages (and there dependencies) should be configured immediately " -"after unpacking. It will be a good idea to do this quite early in the " -"upgrade process as these these configure calls require currently also " -"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers " -"(which maybe not needed). Essentials get per default a high score but the " -"immediate flag is relatively low (a package which has a Pre-Depends is " -"higher rated). These option and the others in the same group can be used to " -"change the scoring. The following example shows the settings with there " -"default values. <placeholder type=\"literallayout\" id=\"0\"/>" +#: apt.conf.5.xml:757 +msgid "" +"Essential packages (and their dependencies) should be configured immediately " +"after unpacking. It is a good idea to do this quite early in the upgrade " +"process as these configure calls also currently require <literal>DPkg::" +"TriggersPending</literal> which will run quite a few triggers (which may not " +"be needed). Essentials get per default a high score but the immediate flag " +"is relatively low (a package which has a Pre-Depends is rated higher). " +"These option and the others in the same group can be used to change the " +"scoring. The following example shows the settings with their default " +"values. <placeholder type=\"literallayout\" id=\"0\"/>" msgstr "" "Essentielle Pakete (und ihre Abhängigkeiten) sollten sofort nach dem " "Entpacken konfiguriert werden. Es ist eine gute Idee, dies ziemlich früh im " "Upgrade-Prozess zu tun, da diese Konfigurationsaufrufe aktuell außerdem " "<literal>DPkg::TriggersPending</literal> benötigen, das eine Reihe von " "Triggern ausführt (die möglicherweise nicht gebraucht werden). Essentielle " -"Pakete haben als Vorgabe eine hohe Bewertung, aber die immediate-Markierung " +"Pakete haben als Vorgabe eine hohe Bewertung, aber die Unmittelbarmarkierung " "ist relativ niedrig (ein Paket, das Pre-Depends hat, wird höher bewertet). " "Diese Option und die anderen in der gleichen Gruppe können benutzt werden, " "um die Bewertung zu ändern. Das folgende Beispiel zeigt die Einstellungen " "mit ihren Vorgabewerten. <placeholder type=\"literallayout\" id=\"0\"/>" #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:728 +#: apt.conf.5.xml:777 msgid "Periodic and Archives options" msgstr "Periodische- und Archivoptionen" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:729 +#: apt.conf.5.xml:778 msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " -"of options configure behavior of apt periodic updates, which is done by " -"<literal>/etc/cron.daily/apt</literal> script. See header of this script for " -"the brief documentation of these options." +"of options configure behavior of apt periodic updates, which is done by the " +"<literal>/etc/cron.daily/apt</literal> script. See the top of this script " +"for the brief documentation of these options." msgstr "" "<literal>APT::Periodic</literal>- und <literal>APT::Archives</literal>-" "Gruppen von Optionen konfigurieren das Verhalten periodischer APT-" @@ -4856,12 +4783,12 @@ msgstr "" "Dokumentation dieser Optionen zu erhalten." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:737 +#: apt.conf.5.xml:786 msgid "Debug options" msgstr "Fehlersuchoptionen" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:739 +#: apt.conf.5.xml:788 msgid "" "Enabling options in the <literal>Debug::</literal> section will cause " "debugging information to be sent to the standard error stream of the program " @@ -4879,7 +4806,7 @@ msgstr "" "könnten es sein:" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:750 +#: apt.conf.5.xml:799 msgid "" "<literal>Debug::pkgProblemResolver</literal> enables output about the " "decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</" @@ -4890,7 +4817,7 @@ msgstr "" "getroffenen Entscheidungen ein." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:758 +#: apt.conf.5.xml:807 msgid "" "<literal>Debug::NoLocking</literal> disables all file locking. This can be " "used to run some operations (for instance, <literal>apt-get -s install</" @@ -4901,7 +4828,7 @@ msgstr "" "<literal>apt-get -s install</literal>) als nicht root-Anwender auszuführen." #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:767 +#: apt.conf.5.xml:816 msgid "" "<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each " "time that <literal>apt</literal> invokes &dpkg;." @@ -4913,7 +4840,7 @@ msgstr "" #. motivating example, except I haven't a clue why you'd want #. to do this. #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> -#: apt.conf.5.xml:775 +#: apt.conf.5.xml:824 msgid "" "<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data " "in CD-ROM IDs." @@ -4922,12 +4849,12 @@ msgstr "" "Daten in CD-ROM-IDs aus." #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:785 +#: apt.conf.5.xml:834 msgid "A full list of debugging options to apt follows." msgstr "Eine vollständige Liste der Fehlersuchoptionen von APT folgt." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:794 +#: apt.conf.5.xml:843 msgid "" "Print information related to accessing <literal>cdrom://</literal> sources." msgstr "" @@ -4935,28 +4862,28 @@ msgstr "" "literal>-Quellen beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:805 +#: apt.conf.5.xml:854 msgid "Print information related to downloading packages using FTP." msgstr "" "gibt Informationen aus, die sich auf das Herunterladen von Paketen per FTP " "beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:816 +#: apt.conf.5.xml:865 msgid "Print information related to downloading packages using HTTP." msgstr "" "gibt Informationen aus, die sich auf das Herunterladen von Paketen per HTTP " "beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:827 +#: apt.conf.5.xml:876 msgid "Print information related to downloading packages using HTTPS." msgstr "" "gibt Informationen aus, die sich auf das Herunterladen von Paketen per HTTPS " "beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:838 +#: apt.conf.5.xml:887 msgid "" "Print information related to verifying cryptographic signatures using " "<literal>gpg</literal>." @@ -4965,7 +4892,7 @@ msgstr "" "mittels <literal>gpg</literal> beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:849 +#: apt.conf.5.xml:898 msgid "" "Output information about the process of accessing collections of packages " "stored on CD-ROMs." @@ -4974,13 +4901,13 @@ msgstr "" "CD-ROMs gespeichert sind." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:859 +#: apt.conf.5.xml:908 msgid "Describes the process of resolving build-dependencies in &apt-get;." msgstr "" "beschreibt den Prozess der Auflösung von Bauabhängigkeiten in &apt-get;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:869 +#: apt.conf.5.xml:918 msgid "" "Output each cryptographic hash that is generated by the <literal>apt</" "literal> libraries." @@ -4989,7 +4916,7 @@ msgstr "" "Bibliotheken generiert wurde." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:879 +#: apt.conf.5.xml:928 msgid "" "Do not include information from <literal>statfs</literal>, namely the number " "of used and free blocks on the CD-ROM filesystem, when generating an ID for " @@ -5000,7 +4927,7 @@ msgstr "" "ID für eine CD-ROM generiert wird." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:890 +#: apt.conf.5.xml:939 msgid "" "Disable all file locking. For instance, this will allow two instances of " "<quote><literal>apt-get update</literal></quote> to run at the same time." @@ -5010,14 +4937,14 @@ msgstr "" "gleichen Zeit laufen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:902 +#: apt.conf.5.xml:951 msgid "Log when items are added to or removed from the global download queue." msgstr "" "protokolliert, wenn Elemente aus der globalen Warteschlange zum " "Herunterladen hinzugefügt oder entfernt werden." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:912 +#: apt.conf.5.xml:961 msgid "" "Output status messages and errors related to verifying checksums and " "cryptographic signatures of downloaded files." @@ -5026,7 +4953,7 @@ msgstr "" "und kryptografischen Signaturen von heruntergeladenen Dateien beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:922 +#: apt.conf.5.xml:971 msgid "" "Output information about downloading and applying package index list diffs, " "and errors relating to package index list diffs." @@ -5035,7 +4962,7 @@ msgstr "" "Diffs und Fehler, die die Paketindexlisten-Diffs betreffen, aus." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:934 +#: apt.conf.5.xml:983 msgid "" "Output information related to patching apt package lists when downloading " "index diffs instead of full indices." @@ -5045,7 +4972,7 @@ msgstr "" "werden." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:945 +#: apt.conf.5.xml:994 msgid "" "Log all interactions with the sub-processes that actually perform downloads." msgstr "" @@ -5053,7 +4980,7 @@ msgstr "" "durchführen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:956 +#: apt.conf.5.xml:1005 msgid "" "Log events related to the automatically-installed status of packages and to " "the removal of unused packages." @@ -5063,7 +4990,7 @@ msgstr "" "beziehen." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:966 +#: apt.conf.5.xml:1015 msgid "" "Generate debug messages describing which packages are being automatically " "installed to resolve dependencies. This corresponds to the initial auto-" @@ -5079,20 +5006,21 @@ msgstr "" "literal>." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:980 +#: apt.conf.5.xml:1029 msgid "" -"Generate debug messages describing which package is marked as keep/install/" +"Generate debug messages describing which packages are marked as keep/install/" "remove while the ProblemResolver does his work. Each addition or deletion " -"may trigger additional actions; they are shown indented two additional space " -"under the original entry. The format for each line is <literal>MarkKeep</" -"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> " -"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)" -"</literal> where <literal>a.b.c</literal> is the current version of the " -"package, <literal>d.e.f</literal> is the version considered for installation " -"and <literal>x.y.z</literal> is a newer version, but not considered for " -"installation (because of a low pin score). The later two can be omitted if " -"there is none or if it is the same version as the installed. " -"<literal>section</literal> is the name of the section the package appears in." +"may trigger additional actions; they are shown indented two additional " +"spaces under the original entry. The format for each line is " +"<literal>MarkKeep</literal>, <literal>MarkDelete</literal> or " +"<literal>MarkInstall</literal> followed by <literal>package-name <a.b.c -" +"> d.e.f | x.y.z> (section)</literal> where <literal>a.b.c</literal> is " +"the current version of the package, <literal>d.e.f</literal> is the version " +"considered for installation and <literal>x.y.z</literal> is a newer version, " +"but not considered for installation (because of a low pin score). The later " +"two can be omitted if there is none or if it is the same as the installed " +"version. <literal>section</literal> is the name of the section the package " +"appears in." msgstr "" "generiert Fehlersuchmeldungen, die beschreiben, welches Paket als " "»keep«/»install«/»remove« markiert ist, während der ProblemResolver seine " @@ -5111,13 +5039,7 @@ msgstr "" "erscheint." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1002 -msgid "Dump the default configuration to standard error on startup." -msgstr "" -"gibt die Vorgabekonfiguration beim Start auf der Standardfehlerausgabe aus." - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1012 +#: apt.conf.5.xml:1050 msgid "" "When invoking &dpkg;, output the precise command line with which it is being " "invoked, with arguments separated by a single space character." @@ -5127,7 +5049,7 @@ msgstr "" "sind, aus." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1023 +#: apt.conf.5.xml:1061 msgid "" "Output all the data received from &dpkg; on the status file descriptor and " "any errors encountered while parsing it." @@ -5136,7 +5058,7 @@ msgstr "" "und alle während deren Auswertung gefundenen Fehler aus." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1034 +#: apt.conf.5.xml:1072 msgid "" "Generate a trace of the algorithm that decides the order in which " "<literal>apt</literal> should pass packages to &dpkg;." @@ -5146,7 +5068,7 @@ msgstr "" "soll." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1046 +#: apt.conf.5.xml:1084 msgid "" "Output status messages tracing the steps performed when invoking &dpkg;." msgstr "" @@ -5154,12 +5076,12 @@ msgstr "" "von &dpkg; ausgeführt werden." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1057 +#: apt.conf.5.xml:1095 msgid "Output the priority of each package list on startup." msgstr "gibt die Priorität jeder Paketliste beim Start aus." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1067 +#: apt.conf.5.xml:1105 msgid "" "Trace the execution of the dependency resolver (this applies only to what " "happens when a complex dependency problem is encountered)." @@ -5169,7 +5091,7 @@ msgstr "" "aufgetreten ist)." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1078 +#: apt.conf.5.xml:1116 msgid "" "Display a list of all installed packages with their calculated score used by " "the pkgProblemResolver. The description of the package is the same as " @@ -5181,7 +5103,7 @@ msgstr "" "Marker</literal> beschrieben." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml:1090 +#: apt.conf.5.xml:1128 msgid "" "Print information about the vendors read from <filename>/etc/apt/vendors." "list</filename>." @@ -5190,13 +5112,13 @@ msgstr "" "filename> gelesenen Anbieter aus." #. type: Content of: <refentry><refsect1><title> -#: apt.conf.5.xml:1112 apt_preferences.5.xml:545 sources.list.5.xml:211 +#: apt.conf.5.xml:1150 apt_preferences.5.xml:545 sources.list.5.xml:211 #: apt-ftparchive.1.xml:596 msgid "Examples" msgstr "Beispiele" #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:1113 +#: apt.conf.5.xml:1151 msgid "" "&configureindex; is a configuration file showing example values for all " "possible options." @@ -5206,7 +5128,7 @@ msgstr "" #. ? reading apt.conf #. type: Content of: <refentry><refsect1><para> -#: apt.conf.5.xml:1125 +#: apt.conf.5.xml:1163 msgid "&apt-cache;, &apt-config;, &apt-preferences;." msgstr "&apt-cache;, &apt-config;, &apt-preferences;." @@ -5236,19 +5158,19 @@ msgid "" "example, <literal>stable</literal> and <literal>testing</literal>). APT " "assigns a priority to each version that is available. Subject to dependency " "constraints, <command>apt-get</command> selects the version with the highest " -"priority for installation. The APT preferences file overrides the " -"priorities that APT assigns to package versions by default, thus giving the " -"user control over which one is selected for installation." +"priority for installation. The APT preferences override the priorities that " +"APT assigns to package versions by default, thus giving the user control " +"over which one is selected for installation." msgstr "" "Es könnten mehrere Versionen eines Pakets zur Installation verfügbar sein, " "wenn die Datei &sources-list; Bezüge zu mehr als einer Distribution enthält " "(zum Beispiel <literal>stable</literal> und <literal>testing</literal>). APT " "weist jeder verfügbaren Version eine Priorität zu. Je nach " "Abhängigkeitsbedingungen wählt <command>apt-get</command> die Version mit " -"der höchsten Priorität zur Installation aus. Die APT-Einstellungsdatei " -"überschreibt die Prioritäten, die APT den Paketversionen standardmäßig " -"zuweist, was dem Anwender die Kontrolle darüber gibt, welche zur " -"Installation ausgewählt wird." +"der höchsten Priorität zur Installation aus. Die APT-Einstellungen setzen die " +"Prioritäten außer Kraft, die APT den Paketversionen standardmäßig zuweist, " +"was dem Anwender die Kontrolle darüber gibt, welche zur Installation " +"ausgewählt wird." #. type: Content of: <refentry><refsect1><para> #: apt_preferences.5.xml:52 @@ -5256,8 +5178,8 @@ msgid "" "Several instances of the same version of a package may be available when the " "&sources-list; file contains references to more than one source. In this " "case <command>apt-get</command> downloads the instance listed earliest in " -"the &sources-list; file. The APT preferences file does not affect the " -"choice of instance, only the choice of version." +"the &sources-list; file. The APT preferences do not affect the choice of " +"instance, only the choice of version." msgstr "" "Es könnten mehrere Instanzen der gleichen Version eines Paketes verfügbar " "sein, wenn die Datei &sources-list; Bezüge zu mehr als einer Distribution " @@ -5271,13 +5193,13 @@ msgstr "" msgid "" "Preferences are a strong power in the hands of a system administrator but " "they can become also their biggest nightmare if used without care! APT will " -"not questioning the preferences so wrong settings will therefore lead to " -"uninstallable packages or wrong decisions while upgrading packages. Even " -"more problems will arise if multiply distribution releases are mixed without " -"a good understanding of the following paragraphs. Packages included in a " -"specific release aren't tested in and therefore doesn't always work as " -"expected in older or newer releases or together with other packages from " -"different releases. You have been warned." +"not question the preferences, so wrong settings can lead to uninstallable " +"packages or wrong decisions while upgrading packages. Even more problems " +"will arise if multiple distribution releases are mixed without a good " +"understanding of the following paragraphs. Packages included in a specific " +"release aren't tested in (and therefore don't always work as expected in) " +"older or newer releases, or together with other packages from different " +"releases. You have been warned." msgstr "" "Eigenschaften sind in der Hand eines Systemadministrator ein große Stärke, " "können aber auch sein größter Albtraum werden, wenn sie unvorsichtig benutzt " @@ -5298,8 +5220,8 @@ msgid "" "following naming convention: The files have either no or \"<literal>pref</" "literal>\" as filename extension and only contain alphanumeric, hyphen (-), " "underscore (_) and period (.) characters. Otherwise APT will print a notice " -"that it has ignored a file if the file doesn't match a pattern in the " -"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in this " +"that it has ignored a file, unless that file matches a pattern in the " +"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in which " "case it will be silently ignored." msgstr "" "Beachten Sie, dass die Dateien im Verzeichnis <filename>/etc/apt/preferences." @@ -5377,7 +5299,7 @@ msgstr "Priorität 1" msgid "" "to the versions coming from archives which in their <filename>Release</" "filename> files are marked as \"NotAutomatic: yes\" but <emphasis>not</" -"emphasis> as \"ButAutomaticUpgrades: yes\" like the debian " +"emphasis> as \"ButAutomaticUpgrades: yes\" like the Debian " "<literal>experimental</literal> archive." msgstr "" "zu den Versionen, die von Archiven kommen, die in deren <filename>Release</" @@ -5395,7 +5317,7 @@ msgstr "Priorität 100" msgid "" "to the version that is already installed (if any) and to the versions coming " "from archives which in their <filename>Release</filename> files are marked " -"as \"NotAutomatic: yes\" and \"ButAutomaticUpgrades: yes\" like the debian " +"as \"NotAutomatic: yes\" and \"ButAutomaticUpgrades: yes\" like the Debian " "backports archive since <literal>squeeze-backports</literal>." msgstr "" "zu der Version, die bereits installiert ist (wenn dies der Fall ist) und zu " @@ -5573,28 +5495,29 @@ msgstr "" #: apt_preferences.5.xml:187 msgid "" "The specific form assigns a priority (a \"Pin-Priority\") to one or more " -"specified packages and specified version or version range. For example, the " -"following record assigns a high priority to all versions of the " +"specified packages with a specified version or version range. For example, " +"the following record assigns a high priority to all versions of the " "<filename>perl</filename> package whose version number begins with " -"\"<literal>5.8</literal>\". Multiple packages can be separated by spaces." +"\"<literal>&good-perl;</literal>\". Multiple packages can be separated by " +"spaces." msgstr "" "Die spezielle Form weist die Priorität (eine »Pin-Priorität«) einem oder " "mehreren angegebenen Paketen und angegebenen Versionen oder " "Versionsbereichen zu. Der folgende Datensatz weist zum Beispiel allen " "Versionen des <filename>perl</filename>-Pakets eine höhere Priorität zu, " -"deren Versionsnummer mit »<literal>5.8</literal>« beginnt. Mehrere Pakete " -"können durch Leerzeichen getrennt werden." +"deren Versionsnummer mit »<literal>&good-perl;</literal>« beginnt. Mehrere " +"Pakete können durch Leerzeichen getrennt werden." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> #: apt_preferences.5.xml:194 #, no-wrap msgid "" "Package: perl\n" -"Pin: version 5.8*\n" +"Pin: version &good-perl;*\n" "Pin-Priority: 1001\n" msgstr "" "Package: perl\n" -"Pin: version 5.8*\n" +"Pin: version &good-perl;*\n" "Pin-Priority: 1001\n" #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> @@ -5727,42 +5650,42 @@ msgstr "" msgid "" "The following record assigns a high priority to all package versions " "belonging to any release whose Archive name is \"<literal>stable</literal>\" " -"and whose release Version number is \"<literal>3.0</literal>\"." +"and whose release Version number is \"<literal>&stable-version;</literal>\"." msgstr "" "Der folgende Datensatz weist allen Paketversionen, die zu einer Distribution " "gehören, deren Archivname »<literal>stable</literal>« und deren Release-" -"Nummer »<literal>3.0</literal>« ist, eine hohe Priorität zu." +"Nummer »<literal>&stable-version;</literal>« ist, eine hohe Priorität zu." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> #: apt_preferences.5.xml:252 #, no-wrap msgid "" "Package: *\n" -"Pin: release a=stable, v=3.0\n" +"Pin: release a=stable, v=&stable-version;\n" "Pin-Priority: 500\n" msgstr "" "Package: *\n" -"Pin: release a=stable, v=3.0\n" +"Pin: release a=stable, v=&stable-version;\n" "Pin-Priority: 500\n" #. type: Content of: <refentry><refsect1><refsect2><title> #: apt_preferences.5.xml:262 -msgid "Regular expressions and glob() syntax" -msgstr "Reguläre Ausdrücke und glob()-Syntax" +msgid "Regular expressions and &glob; syntax" +msgstr "Reguläre Ausdrücke und &glob;-Syntax" #. type: Content of: <refentry><refsect1><refsect2><para> #: apt_preferences.5.xml:264 msgid "" -"APT also supports pinning by glob() expressions and regular expressions " -"surrounded by /. For example, the following example assigns the priority 500 " -"to all packages from experimental where the name starts with gnome (as a glob" -"()-like expression) or contains the word kde (as a POSIX extended regular " -"expression surrounded by slashes)." +"APT also supports pinning by &glob; expressions, and regular expressions " +"surrounded by slashes. For example, the following example assigns the " +"priority 500 to all packages from experimental where the name starts with " +"gnome (as a &glob;-like expression) or contains the word kde (as a POSIX " +"extended regular expression surrounded by slashes)." msgstr "" -"APT unterstützt außerdem Pinning mittels glob()-Ausdrücken und regulären " +"APT unterstützt außerdem Pinning mittels &glob;-Ausdrücken und regulären " "Ausdrücken, die von »/« umschlossen sind. Das folgende Beispiel weist " "beispielsweise allen Paketen aus Experimental die Priorität 500 zu, bei " -"denen der Name mit »gnome« beginnt (wie ein glob()-artiger Ausdruck) oder " +"denen der Name mit »gnome« beginnt (wie ein &glob;-artiger Ausdruck) oder " "das Wort »kde« enthält (wie ein erweiterter regulärer POSIX-Ausdruck, der " "von Schrägstrichen umschlossen wird)." @@ -5783,7 +5706,7 @@ msgstr "" msgid "" "The rule for those expressions is that they can occur anywhere where a " "string can occur. Thus, the following pin assigns the priority 990 to all " -"packages from a release starting with karmic." +"packages from a release starting with &ubuntu-codename;." msgstr "" "Die Regel für diese Ausdrücke ist, dass sie überall dort auftreten können, " "wo eine Zeichenkette auftreten kann. Somit weist die folgende Pin allen " @@ -5794,11 +5717,11 @@ msgstr "" #, no-wrap msgid "" "Package: *\n" -"Pin: release n=karmic*\n" +"Pin: release n=&ubuntu-codename;*\n" "Pin-Priority: 990\n" msgstr "" "Package: *\n" -"Pin: release n=karmic*\n" +"Pin: release n=&ubuntu-codename;*\n" "Pin-Priority: 990\n" #. type: Content of: <refentry><refsect1><refsect2><para> @@ -5807,9 +5730,9 @@ msgid "" "If a regular expression occurs in a <literal>Package</literal> field, the " "behavior is the same as if this regular expression were replaced with a list " "of all package names it matches. It is undecided whether this will change in " -"the future, thus you should always list wild-card pins first, so later " +"the future; thus you should always list wild-card pins first, so later " "specific pins override it. The pattern \"<literal>*</literal>\" in a " -"Package field is not considered a glob() expression in itself." +"Package field is not considered a &glob; expression in itself." msgstr "" "Falls ein regulärer Ausdruck in einem <literal>Package</literal>-Feld " "vorkommt, ist das Verhalten dasselbe, als wenn der reguläre Ausdruck durch " @@ -5817,7 +5740,7 @@ msgstr "" "nicht entschieden, wie sich dies in Zukunft ändern wird, daher sollten Sie " "immer zuerst Platzhalter-Pins auflisten, so dass es später spezielle Pins " "außer Kraft setzen können. Das Muster »<literal>*</literal>« in einem " -"»Package«-Feld wird selbst nicht als ein glob()-Ausdruck angesehen." +"»Package«-Feld wird selbst nicht als ein &glob;-Ausdruck angesehen." #. type: Content of: <refentry><refsect1><refsect2><title> #: apt_preferences.5.xml:307 @@ -5944,7 +5867,7 @@ msgstr "" #, no-wrap msgid "" "Package: perl\n" -"Pin: version 5.8*\n" +"Pin: version &good-perl;*\n" "Pin-Priority: 1001\n" "\n" "Package: *\n" @@ -5956,7 +5879,7 @@ msgid "" "Pin-Priority: 50\n" msgstr "" "Package: perl\n" -"Pin: version 5.8*\n" +"Pin: version &good-perl;*\n" "Pin-Priority: 1001\n" "\n" "Package: *\n" @@ -5977,15 +5900,15 @@ msgstr "Dann:" msgid "" "The most recent available version of the <literal>perl</literal> package " "will be installed, so long as that version's version number begins with " -"\"<literal>5.8</literal>\". If <emphasis>any</emphasis> 5.8* version of " -"<literal>perl</literal> is available and the installed version is 5.9*, then " -"<literal>perl</literal> will be downgraded." +"\"<literal>&good-perl;</literal>\". If <emphasis>any</emphasis> &good-perl;" +"* version of <literal>perl</literal> is available and the installed version " +"is &bad-perl;*, then <literal>perl</literal> will be downgraded." msgstr "" "Es wird die aktuellste verfügbare Version des Pakets <literal>perl</literal> " -"installiert, so lange die Versionsnummer mit »<literal>5.8</literal>« " -"anfängt. Wenn <emphasis>irgendeine</emphasis> 5.8*-Version von " -"<literal>perl</literal> verfügbar ist und die installierte Version 5.9* ist, " -"dann wird von <literal>perl</literal> ein Downgrade durchgeführt." +"installiert, so lange die Versionsnummer mit »<literal>&good-perl;</" +"literal>« anfängt. Wenn <emphasis>irgendeine</emphasis> &good-perl;*-Version " +"von <literal>perl</literal> verfügbar ist und die installierte Version &bad-" +"perl;* ist, dann wird von <literal>perl</literal> ein Downgrade durchgeführt." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> #: apt_preferences.5.xml:379 @@ -6149,29 +6072,30 @@ msgstr "Pin: release n=&testing-codename;\n" #: apt_preferences.5.xml:462 msgid "" "names the release version. For example, the packages in the tree might " -"belong to Debian release version 3.0. Note that there is normally no " -"version number for the <literal>testing</literal> and <literal>unstable</" -"literal> distributions because they have not been released yet. Specifying " -"this in the APT preferences file would require one of the following lines." +"belong to Debian release version &stable-version;. Note that there is " +"normally no version number for the <literal>testing</literal> and " +"<literal>unstable</literal> distributions because they have not been " +"released yet. Specifying this in the APT preferences file would require one " +"of the following lines." msgstr "" "benennt die Release-Version. Die Pakete im Baum könnten zum Beispiel zur " -"Debian-Release-Version 3.0 gehören. Beachten Sie, dass es normalerweise " -"keine Versionsnummer für <literal>testing</literal>- und <literal>unstable</" -"literal>-Distributionen gibt, weil sie noch nicht veröffentlicht wurden. " -"Diese in der APT-Einstellungsdatei anzugeben würde eine der folgenden Zeilen " -"benötigen:" +"Debian-Release-Version &stable-version; gehören. Beachten Sie, dass es " +"normalerweise keine Versionsnummer für <literal>testing</literal>- und " +"<literal>unstable</literal>-Distributionen gibt, weil sie noch nicht " +"veröffentlicht wurden. Diese in der APT-Einstellungsdatei anzugeben würde " +"eine der folgenden Zeilen benötigen:" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> #: apt_preferences.5.xml:471 #, no-wrap msgid "" -"Pin: release v=3.0\n" -"Pin: release a=stable, v=3.0\n" -"Pin: release 3.0\n" +"Pin: release v=&stable-version;\n" +"Pin: release a=stable, v=&stable-version;\n" +"Pin: release &stable-version;\n" msgstr "" -"Pin: release v=3.0\n" -"Pin: release a=stable, v=3.0\n" -"Pin: release 3.0\n" +"Pin: release v=&stable-version;\n" +"Pin: release a=stable, v=&stable-version;\n" +"Pin: release &stable-version;\n" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> #: apt_preferences.5.xml:480 @@ -6582,45 +6506,40 @@ msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;" #. type: Content of: <refentry><refnamediv><refpurpose> #: sources.list.5.xml:33 -msgid "Package resource list for APT" -msgstr "Paketressourcenliste für APT" +msgid "List of configured APT data sources" +msgstr "Liste konfigurierter APT-Datenquellen" #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:37 -msgid "" -"The package resource list is used to locate archives of the package " -"distribution system in use on the system. At this time, this manual page " -"documents only the packaging system used by the Debian system. This control " -"file is <filename>/etc/apt/sources.list</filename>." -msgstr "" -"Die Paketquellenliste wird benutzt, um Archive des Paketverteilungssystems, " -"das auf dem System benutzt wird, zu finden. Momentan dokumentiert diese " -"Handbuchseite nur das vom Debian-GNU/Linux-System benutzte " -"Paketierungssystem. Diese Steuerungsdatei ist <filename>/etc/apt/sources." -"list</filename>." +#: sources.list.5.xml:38 +msgid "" +"The source list <filename>/etc/apt/sources.list</filename> is designed to " +"support any number of active sources and a variety of source media. The file " +"lists one source per line, with the most preferred source listed first. The " +"information available from the configured sources is acquired by " +"<command>apt-get update</command> (or by an equivalent command from another " +"APT front-end)." +msgstr "" +"Die Quellenliste <filename>/etc/apt/sources.list</filename> wurde entworfen, " +"um jede Zahl aktiver Quellen und unterschiedlicher Quellmedien zu " +"unterstützen. Die Datei führt eine Quelle je Zeile auf, mit der bevorzugten " +"Quelle am Anfang. Die Informationen über die konfigurierten Quellen werden " +"durch <command>apt-get update</command> (oder einen vergleichbaren Befehl " +"einer anderen APT-Oberfläche) beschafft." #. type: Content of: <refentry><refsect1><para> -#: sources.list.5.xml:42 -msgid "" -"The source list is designed to support any number of active sources and a " -"variety of source media. The file lists one source per line, with the most " -"preferred source listed first. The format of each line is: <literal>type uri " -"args</literal> The first item, <literal>type</literal> determines the format " -"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource " -"Identifier (URI), which is a superset of the more specific and well-known " -"Universal Resource Locator, or URL. The rest of the line can be marked as a " -"comment by using a #." -msgstr "" -"Die Quellenliste wurde entworfen, um eine beliebige Anzahl von aktiven " -"Quellen und eine Vielzahl von Quellmedien zu unterstützen. Die Datei listet " -"eine Quelle pro Zeile auf, wobei die bevorzugten Quellen zuerst aufgelistet " -"sind. Das Format jeder Zeile lautet: <literal>Typ URI Argumente</literal>. " -"Das erste Element <literal>Typ</literal> legt das Format für " -"<literal>Argumente</literal> fest. <literal>URI</literal> ist ein " -"universeller Quellenbezeichner »Universal Resource Identifier« (URI), der " -"eine Obermenge des spezielleren und besser bekannten Universal Resource " -"Locator (URL) ist. Der Rest der Zeile kann unter Verwendung von # als " -"Kommentar markiert werden." +#: sources.list.5.xml:45 +msgid "" +"Each line specifying a source starts with type (e.g. <literal>deb-src</" +"literal>) followed by options and arguments for this type. Individual " +"entries cannot be continued onto a following line. Empty lines are ignored, " +"and a <literal>#</literal> character anywhere on a line marks the remainder " +"of that line as a comment." +msgstr "" +"Jede Zeile, die eine Quelle angibt, beginnt mit den Typ (z.B. " +"<literal>deb-src</literal>) gefolgt von Optionen und Argumenten für diesen " +"Typ. Einzelne Einträge können nicht auf einer folgenden Zeile fortgesetzt " +"werden. Leere Zeilen werden ignoriert und ein <literal>#</literal>-Zeichen " +"irgendwo in einer Zeile kennzeichnet den Rest dieser Zeile als Kommentar." #. type: Content of: <refentry><refsect1><title> #: sources.list.5.xml:53 @@ -6635,9 +6554,9 @@ msgid "" "the regular <filename>sources.list</filename> file. File names need to end " "with <filename>.list</filename> and may only contain letters (a-z and A-Z), " "digits (0-9), underscore (_), hyphen (-) and period (.) characters. " -"Otherwise APT will print a notice that it has ignored a file if the file " -"doesn't match a pattern in the <literal>Dir::Ignore-Files-Silently</literal> " -"configuration list - in this case it will be silently ignored." +"Otherwise APT will print a notice that it has ignored a file, unless that " +"file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> " +"configuration list - in which case it will be silently ignored." msgstr "" "Das Verzeichnis <filename>/etc/apt/sources.list.d</filename> stellt eine " "Möglichkeit bereit, sources.list-Einträge in separaten Dateien hinzuzufügen. " @@ -6657,21 +6576,21 @@ msgstr "Die Typen deb und deb-src" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:66 msgid "" -"The <literal>deb</literal> type describes a typical two-level Debian " -"archive, <filename>distribution/component</filename>. Typically, " -"<literal>distribution</literal> is generally an archivename like " +"The <literal>deb</literal> type references a typical two-level Debian " +"archive, <filename>distribution/component</filename>. The " +"<literal>distribution</literal> is generally an archive name like " "<literal>stable</literal> or <literal>testing</literal> or a codename like " "<literal>&stable-codename;</literal> or <literal>&testing-codename;</" -"literal> while component is one of <literal>main</literal> <literal>contrib</" -"literal> or <literal>non-free</literal>. The <literal>deb-src</literal> type " -"describes a debian distribution's source code in the same form as the " -"<literal>deb</literal> type. A <literal>deb-src</literal> line is required " -"to fetch source indexes." +"literal> while component is one of <literal>main</literal>, " +"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-" +"src</literal> type references a Debian distribution's source code in the " +"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> " +"line is required to fetch source indexes." msgstr "" "Der <literal>deb</literal>-Typ beschreibt ein typisches zweistufiges Debian-" "Archiv, <filename>Distribution/Komponente</filename>. <literal>Distribution</" "literal> ist typischerweise ein Archivname wie <literal>stable</literal> " -"oder <literal>testing</literal> oder ein Kodename wie <literal>&stable-" +"oder <literal>testing</literal> oder ein Codename wie <literal>&stable-" "codename;</literal> oder <literal>&testing-codename;</literal> während " "Komponente entweder <literal>main</literal>, <literal>contrib</literal> oder " "<literal>non-free</literal> ist. Der <literal>deb-src</literal>-Typ " @@ -6701,37 +6620,40 @@ msgid "" "Debian distribution, from which APT will find the information it needs. " "<literal>distribution</literal> can specify an exact path, in which case the " "components must be omitted and <literal>distribution</literal> must end with " -"a slash (/). This is useful for when the case only a particular sub-section " -"of the archive denoted by the URI is of interest. If <literal>distribution</" -"literal> does not specify an exact path, at least one <literal>component</" -"literal> must be present." +"a slash (<literal>/</literal>). This is useful for the case when only a " +"particular sub-section of the archive denoted by the URI is of interest. If " +"<literal>distribution</literal> does not specify an exact path, at least one " +"<literal>component</literal> must be present." msgstr "" "Die URI für den <literal>deb</literal>-Typ muss die Basis der Debian-" "Distribution angeben, wo APT die Informationen findet, die es benötigt. " "<literal>Distribution</literal> kann einen genauen Pfad angeben. In diesem " "Fall müssen die Komponenten weggelassen werden und <literal>Distribution</" -"literal> muss mit einem Schrägstrich (/) enden. Dies ist nützlich, wenn nur " -"ein bestimmter Unterabschnitt des von der URI angegebenen Archivs von " -"Interesse ist. Wenn <literal>Distribution</literal> keinen genauen Pfad " -"angibt, muss mindestens eine <literal>Komponente</literal> angegeben sein." +"literal> muss mit einem Schrägstrich (<literal>/</literal>) enden. Dies ist " +"nützlich, wenn nur ein bestimmter Unterabschnitt des von der URI angegebenen " +"Archivs von Interesse ist. Wenn <literal>Distribution</literal> keinen " +"genauen Pfad angibt, muss mindestens eine <literal>Komponente</literal> " +"angegeben sein." #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:92 msgid "" "<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)" -"</literal> which expands to the Debian architecture (i386, m68k, " -"powerpc, ...) used on the system. This permits architecture-independent " -"<filename>sources.list</filename> files to be used. In general this is only " -"of interest when specifying an exact path, <literal>APT</literal> will " -"automatically generate a URI with the current architecture otherwise." -msgstr "" -"<literal>Distribution</literal> könnte außerdem eine Variable, <literal>" -"$(ARCH)</literal>, enthalten, die zur Debian-Architektur (i386, m68k, " -"powerpc, …) expandiert wird, die auf dem System benutzt wird. Dies erlaubt " -"es, architekturabhängige <filename>sources.list</filename>-Dateien zu " -"benutzen. Im Allgemeinen ist dies nur von Interesse, wenn ein genauer Pfad " -"angegeben wird, andernfalls wird <literal>APT</literal> automatisch eine URI " -"mit der aktuellen Architektur generieren." +"</literal> which expands to the Debian architecture (such as <literal>amd64</" +"literal> or <literal>armel</literal>) used on the system. This permits " +"architecture-independent <filename>sources.list</filename> files to be used. " +"In general this is only of interest when specifying an exact path, " +"<literal>APT</literal> will automatically generate a URI with the current " +"architecture otherwise." +msgstr "" +"<literal>distribution</literal> könnte außerdem eine Variable, <literal>" +"$(ARCH)</literal>, enthalten, die zur Debian-Architektur (wie " +"<literal>amd64</literal> oder <literal>armel</literal>) expandiert wird, die " +"auf dem System benutzt wird. Dies erlaubt es, architekturunabhängige " +"<filename>sources.list</filename>-Dateien zu benutzen. Im Allgemeinen ist " +"dies nur von Interesse, wenn ein genauer Pfad angegeben wird, andernfalls " +"wird <literal>APT</literal> automatisch eine URI mit der aktuellen " +"Architektur generieren." #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:100 @@ -6752,23 +6674,23 @@ msgstr "" "aller verfügbarer Distributionen oder Komponenten von diesem Ort gewünscht " "wird. APT wird die URI-Liste sortieren, nachdem es intern eine komplette " "Zusammenstellung generiert hat und es wird mehrere Bezüge zum gleichen " -"Internet-Host zusammenfassen, zum Beispiel zu einer einzigen Verbindung, so " -"dass es nicht ineffizient FTP-Verbindungen herstellt, sie schließt, sonst " -"etwas tut und dann erneut eine Verbindung zum gleichen Host herstellt. Diese " -"Funktion ist nützlich für den Zugriff auf ausgelastete FTP-Sites mit " +"Internet-Rechner zusammenfassen, zum Beispiel zu einer einzigen Verbindung, " +"so dass es nicht ineffizient FTP-Verbindungen herstellt, sie schließt, sonst " +"etwas tut und dann erneut eine Verbindung zum gleichen Rechner herstellt. " +"Diese Funktion ist nützlich für den Zugriff auf ausgelastete FTP-Sites mit " "Begrenzungen der Anzahl gleichzeitiger anonymer Anwender. APT parallelisiert " -"außerdem Verbindungen zu verschiedenen Hosts, um effektiver mit Orten " +"außerdem Verbindungen zu verschiedenen Rechnern, um effektiver mit Orten " "niedriger Bandbreite hauszuhalten." #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:112 msgid "" -"<literal>options</literal> is always optional and needs to be surounded by " +"<literal>options</literal> is always optional and needs to be surrounded by " "square brackets. It can consist of multiple settings in the form " "<literal><replaceable>setting</replaceable>=<replaceable>value</" "replaceable></literal>. Multiple settings are separated by spaces. The " -"following settings are supported by APT, note though that unsupported " -"settings will be ignored silently:" +"following settings are supported by APT (note however that unsupported " +"settings will be ignored silently):" msgstr "" "<literal>options</literal> ist immer optional und muss in eckige Klammern " "eingeschlossen werden. Es kann aus mehreren Einstellungen in der Form " @@ -6783,7 +6705,7 @@ msgstr "" msgid "" "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</" "replaceable>,…</literal> can be used to specify for which architectures " -"packages information should be downloaded. If this option is not set all " +"information should be downloaded. If this option is not set all " "architectures defined by the <literal>APT::Architectures</literal> option " "will be downloaded." msgstr "" @@ -6850,10 +6772,8 @@ msgstr "URI-Beschreibung" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:143 -#, fuzzy -#| msgid "more recognizable URI types" msgid "The currently recognized URI types are:" -msgstr "weitere erkennbare URI-Typen" +msgstr "Die derzeit zulässigen URI-Typen sind:" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: sources.list.5.xml:147 @@ -6898,74 +6818,73 @@ msgstr "" msgid "" "The ftp scheme specifies an FTP server for the archive. APT's FTP behavior " "is highly configurable; for more information see the &apt-conf; manual page. " -"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</" -"envar> environment variable. It is possible to specify a http proxy (http " -"proxy servers often understand ftp urls) using this method and ONLY this " -"method. ftp proxies using http specified in the configuration file will be " +"Please note that an FTP proxy can be specified by using the " +"<envar>ftp_proxy</envar> environment variable. It is possible to specify an " +"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this " +"environment variable and <emphasis>only</emphasis> this environment " +"variable. Proxies using HTTP specified in the configuration file will be " "ignored." msgstr "" -"Das ftp-Schema gibt einen FTP-Server für das Archiv an. Das FTP-Verhalten " -"von APT ist in hohem Maße konfigurierbar. Um weitere Informationen zu " -"erhalten, lesen Sie die &apt-conf;-Handbuchseite. Bitte beachten Sie, dass " -"ein FTP-Proxy durch Benutzung der <envar>ftp_proxy</envar>-" -"Umgebungsvariablen angegeben werden kann. Es ist mit dieser Methode und NUR " -"dieser Methode möglich, einen HTTP-Proxy anzugeben (HTTP-Proxy-Server " -"verstehen oft auch FTP-URLs). FTP-Proxys, die gemäß Angabe in der " -"Konfigurationsdatei HTTP benutzen, werden ignoriert." +"Das ftp-Schema gibt einen FTP-Server für das Archiv an. Das FTP-Verhalten von " +"APT ist in hohem Maße konfigurierbar. Um weitere Informationen zu erhalten, " +"lesen Sie die &apt-conf;-Handbuchseite. Bitte beachten Sie, dass ein " +"FTP-Proxy durch Benutzung der <envar>ftp_proxy</envar>-Umgebungsvariablen " +"angegeben werden kann. Es ist mittels dieser Umgebungsvariable und " +"<emphasis>nur</emphasis> dieser Umgebungsvariable möglich, einen HTTP-Proxy " +"anzugeben (HTTP-Proxy-Server verstehen oft auch FTP-URLs). FTP-Proxys, die " +"gemäß Angabe in der Konfigurationsdatei HTTP benutzen, werden ignoriert." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: sources.list.5.xml:183 +#: sources.list.5.xml:184 msgid "" "The copy scheme is identical to the file scheme except that packages are " "copied into the cache directory instead of used directly at their location. " -"This is useful for people using a zip disk to copy files around with APT." +"This is useful for people using removable media to copy files around with " +"APT." msgstr "" "Das copy-Schema ist identisch mit dem file-Schema, außer dass Pakete in das " "Zwischenspeicherverzeichnis kopiert werden, anstatt direkt von ihrem " -"Herkunftsort benutzt zu werden. Dies ist für Leute nützlich, die eine ZIP-" -"Platte benutzen, um Dateien mit APT umherzukopieren." +"Herkunftsort benutzt zu werden. Dies ist für Leute nützlich, die " +"Wechseldatenträger benutzen, um Dateien mit APT umherzukopieren." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> -#: sources.list.5.xml:190 +#: sources.list.5.xml:191 msgid "" -"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given " -"user and access the files. It is a good idea to do prior arrangements with " -"RSA keys or rhosts. Access to files on the remote uses standard " -"<command>find</command> and <command>dd</command> commands to perform the " -"file transfers from the remote." +"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access " +"the files as a given user. Prior configuration of rhosts or RSA keys is " +"recommended. The standard <command>find</command> and <command>dd</command> " +"commands are used to perform the file transfers from the remote host." msgstr "" -"Die rsh/ssh-Methode ruft rsh/ssh auf, um sich als angegebener Benutzer mit " -"einem Rechner in der Ferne zu verbinden und auf die Dateien zuzugreifen. Es " -"ist eine gute Idee, vorher Vorbereitungen mit RSA-Schlüsseln oder rhosts zu " -"treffen. Der Zugriff auf Dateien in der Ferne benutzt die Standardbefehle " -"<command>find</command> und <command>dd</command>, um die Datenübertragung " -"aus der Ferne durchzuführen." +"Die rsh/ssh-Methode ruft RSH/SSH auf, um sich mit einem Rechner in der Ferne " +"zu verbinden und als angegebener Benutzer auf die Dateien zuzugreifen. Es " +"wird empfohlen, vorher Rhosts und RSA-Schlüssel zu konfigurieren. Für die " +"Übertragung von Dateien aus der Ferne werden die Standardbefehle " +"<command>find</command> und <command>dd</command> verwandt." #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term> #: sources.list.5.xml:198 -#, fuzzy -#| msgid "more recognizable URI types" msgid "adding more recognizable URI types" -msgstr "weitere erkennbare URI-Typen" +msgstr "weitere zulässige URI-Typen hinzufügen" #. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para> #: sources.list.5.xml:200 msgid "" -"APT can be extended with more methods shipped in other optional packages " -"which should follow the nameing scheme <package>apt-transport-" -"<replaceable>method</replaceable></package>. The APT team e.g. maintains " -"also the <package>apt-transport-https</package> package which provides " -"access methods for https-URIs with features similar to the http method, but " -"other methods for using e.g. debtorrent are also available, see &apt-" +"APT can be extended with more methods shipped in other optional packages, " +"which should follow the naming scheme <package>apt-transport-" +"<replaceable>method</replaceable></package>. For instance, the APT team " +"also maintains the package <package>apt-transport-https</package>, which " +"provides access methods for HTTPS URIs with features similar to the http " +"method. Methods for using e.g. debtorrent are also available - see &apt-" "transport-debtorrent;." msgstr "" "APT kann mit weiteren Methoden, die in anderen optionalen Paketen geliefert " "werden, die dem Namensschema <literal>apt-transport-<replaceable>Methode</" "replaceable></literal> folgen sollten, erweitert werden. Das APT-Team " -"betreut z.B. außerdem das Paket <literal>apt-transport-https</literal>, das " -"Zugriffsmethoden für HTTPS-URIs mit Funktionen bereitstellt, die denen der " -"HTTP-Methode ähneln, bei der aber andere Methoden für z.B. debtorrent " -"verfügbar sind, siehe &apt-transport-debtorrent;." +"betreut zum Beispiel außerdem das Paket " +"<literal>apt-transport-https</literal>, das Zugriffsmethoden für HTTPS-URIs " +"mit Funktionen bereitstellt, die denen der HTTP-Methode ähneln. Außerdem sind " +"z.B. Methoden für die Benutzung von debtorrent verfügbar – siehe" +" &apt-transport-debtorrent;." #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml:212 @@ -7187,8 +7106,8 @@ msgstr "Werkzeug zum Sortieren von Paketindexdateien" #. type: Content of: <refentry><refsect1><para> #: apt-sortpkgs.1.xml:39 msgid "" -"<command>apt-sortpkgs</command> will take an index file (Source index or " -"Package index) and sort the records so that they are ordered by the package " +"<command>apt-sortpkgs</command> will take an index file (source index or " +"package index) and sort the records so that they are ordered by the package " "name. It will also sort the internal fields of each record according to the " "internal sorting rules." msgstr "" @@ -7198,15 +7117,16 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt-sortpkgs.1.xml:45 -msgid "All output is sent to stdout, the input must be a seekable file." +msgid "" +"All output is sent to standard output; the input must be a seekable file." msgstr "" -"Alle Ausgaben werden an stdout gesendet, die Eingabe muss eine durchsuchbare " -"Datei sein." +"Alle Ausgaben werden an die Standardausgabe gesandt, die Eingabe muss eine " +"durchsuchbare Datei sein." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-sortpkgs.1.xml:54 msgid "" -"Use Source index field ordering. Configuration Item: <literal>APT::" +"Use source index field ordering. Configuration Item: <literal>APT::" "SortPkgs::Source</literal>." msgstr "" "Quellindexfeldanordnung benutzen. Konfigurationselement: <literal>APT::" @@ -7506,7 +7426,7 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:184 msgid "" -"Sets the default compression schemes to use for the Package index files. It " +"Sets the default compression schemes to use for the package index files. It " "is a string that contains a space separated list of at least one of: '.' (no " "compression), 'gzip' and 'bzip2'. The default for all compression schemes is " "'. gzip'." @@ -7699,12 +7619,12 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml:307 msgid "" -"Sets the output Contents file. Defaults to <filename>$(DIST)/Contents-$(ARCH)" +"Sets the output Contents file. Defaults to <filename>$(DIST)/$(SECTION)/Contents-$(ARCH)" "</filename>. If this setting causes multiple Packages files to map onto a " "single Contents file (as is the default) then <command>apt-ftparchive</" "command> will integrate those package files together automatically." msgstr "" -"setzt die Ausgabe-Contens-Datei. Vorgabe ist <filename>$(DIST)/Contents-" +"setzt die Ausgabe-Contens-Datei. Vorgabe ist <filename>$(DIST)/$(SECTION)/Contents-" "$(ARCH)</filename>. Wenn diese Einstellung bewirkt, dass mehrere Packages-" "Dateien auf einer einzelnen Inhaltsdatei abgebildet werden (so wie es " "Vorgabe ist), dann wird <command>apt-ftparchive</command> diese Dateien " @@ -9883,11 +9803,3 @@ msgstr " # apt-get -o dir::cache::archives=\"/Platte/\" dist-upgrade" #: offline.sgml:234 msgid "Which will use the already fetched archives on the disc." msgstr "Es wird die bereits auf die Platte heruntergeladenen Archive benutzen." - -#, fuzzy -#~ msgid "" -#~ "The currently recognized URI types are cdrom, file, http, ftp, copy, ssh, " -#~ "rsh." -#~ msgstr "" -#~ "Die aktuell erkannten URI-Typen sind »cdrom«, »file«, »http«, »ftp«, " -#~ "»copy«, »ssh«, »rsh«."