};
)
with newlines placed to make
-it more readable. In general the sample configuration file in
+it more readable. Lists can be created by opening a scope an including a
+single word enclosed in quotes followed by a semicolon.
+In general the sample configuration file in
em(/usr/doc/apt/examples/apt.conf) is a good guide for how it should look.
+All of the APT tools take a -o option which allows an arbitary configuration
+directive to be specified on the command line. The syntax is a full option
+name (APT::Get::Assume-Yes for instance) followed by an equals sign then the
+new value of the option. Lists can be appended too by adding a trailing ::
+to the list name.
+
manpagesection(The APT Group)
This group of options controls general APT behavoir as well as holding the
options for all of the tools.
Ignore Held packages; This global options causes the problem resolver to
ignore held packages in its decision making.
+dit(bf(Immediate-Configure))
+Disable Immedate Configuration; This dangerous option disables some
+of APT's ordering code to cause it to make fewer dpkg calls. Doing
+so may be necessary on some extremely slow single user systems but
+is very dangerous and may cause package install scripts to fail or worse.
+Use at your own risk.
+
dit(bf(Get))
The Get subsection controls the bf(apt-get(8)) tool, please see its
documentation for more information about the options here.
dit(bf(Cache))
-The Cache subsection controls the bf(apt-cache(8)) tool, please see it
-sdocumentation for more information about the options here.
+The Cache subsection controls the bf(apt-cache(8)) tool, please see its
+documentation for more information about the options here.
dit(bf(CDROM))
-The CDROM subsection controls the bf(apt-cdrom(8)) tool, please see it
-sdocumentation for more information about the options here.
+The CDROM subsection controls the bf(apt-cdrom(8)) tool, please see its
+documentation for more information about the options here.
enddit()
startdit()
dit(bf(Queue-Mode))
Queuing mode; bf(Queue-Mode) can be one of bf(host) or bf(access) which
-determins how APT parallelizesoutgoing connections. bf(host) means that
+determins how APT parallelizes outgoing connections. bf(host) means that
one connection per target host will be opened, bf(access) means that one
connection per URI type will be opened.
+dit(bf(Retries))
+Number of retries to perform. If this is non-zero apt will retry failed
+files the given number of times.
+
dit(bf(http))
HTTP URIs; http::Proxy is the default http proxy to use. It is in the standard
form of em(http://[[user][:pass]@]host[:port]/). Per host proxies can also
em(DIRECT) meaning to use no proxies. The em($http_proxy) environment variable
will override all settings.
+Three settings are provided for cache control with HTTP/1.1 complient proxy
+caches. bf(No-Cache) tells the proxy to not used its cached response under
+any circumstances, bf(Max-Age) is sent only for index files and tells the
+cache to refresh its object if it is older than the given number of seconds.
+Debian updates its index files daily so the default is 1 day. bf(No-Store)
+specifies that the cache should never store this request, it is only
+set for archive files. This may be usefull to prevent polluting a proxy cache
+with very large .deb files. Note: Squid 2.0.2 does not support any of
+these options.
+
+One setting is provided to control the pipeline depth in cases where the
+remote server is not RFC conforming or buggy (such as Squid 2.0.2)
+Acquire::http::Pipeline-Depth can be a value from 0 to 5 indicating how many
+outstanding requests APT should send.
+
+dit(bf(ftp))
+FTP URis; ftp::Proxy is the default proxy server to use. It is in the
+standard form of em(http://[[user][:pass]@]host[:port]/) and is overriden
+by the ftp_proxy environment variable. To use a ftp proxy you will have to
+set the ftp::ProxyLogin script in the configuration file. This entry
+specifies the commands to send to tell the proxy server what to connect
+to. Please see em(/usr/doc/apt/examples/apt.conf) for an example of how
+to do this. The subsitution variables available are $(PROXY_USER),
+$(PROXY_PASS), $(SITE_USER), $(SITE_PASS), $(SITE), and $(SITE_PORT).
+Each is taken from it's respective URI component.
+
+Several settings are provided to control passive mode. Generally it is safe
+to leave passive mode on, it works in nearly every environment. However some
+situations require that passive mode be disabled and port mode ftp used
+instead. This can be done globally, for connections that go through a proxy
+or for a specific host (See the sample config file for examples)
+
dit(bf(cdrom))
CDROM URIs; the only setting for CDROM URIs is the mount point, cdrom::Mount
which must be the mount point for the CDROM drive as specified in /etc/fstab.
+It is possible to provide alternate mount and unmount commands if your
+mount point cannot be listed in the fstab (such as an SMB mount). The syntax
+is to put "/cdrom/"::Mount "foo"; within the cdrom block. It is important to
+have the trailing slash. Unmount commands can be specified using UMount.
enddit()
location to place downloaded archives, bf(Dir::Cache::archives). Like
bf(Dir::State) the default directory is contained in bf(Dir::Cache)
-bf(Dir::Etc) contains the location of configuration files, bd(sourcelist)
+bf(Dir::Etc) contains the location of configuration files, bf(sourcelist)
gives the location of the sourcelist and bf(main) is the default configuration
file (setting has no effect)
Binary programs are pointed to by bf(Dir::Bin). bf(methods) specifies the
-location of the method handlers and bf(gzip), bf(dpkg), bf(apt-get), and
+location of the method handlers and bf(gzip), bf(dpkg), bf(apt-get),
+bf(dpkg-source), bf(dpkg-buildpackage) and
bf(apt-cache) specify the location of the respective programs.
manpagesection(APT in DSelect)
startdit()
dit(bf(Clean))
Cache Clean mode; this value may be one of always, auto, prompt and never.
-Currently always and auto are identical but their meanings may diverge in
-future to have auto only clean useless archives and always clean all archives.
+always will remove all archives after they have been downloaded while auto
+will only remove things that are no longer downloadable (replaced with a new
+version for instance)
dit(bf(Options))
The contents of this variable is passed to bf(apt-get(8)) as command line
The default is to prompt only on error.
enddit()
+manpagesection(How APT calls DPkg)
+Several configuration directives control how APT invokes dpkg. These are in
+the bf(DPkg) section.
+
+startdit()
+dit(bf(Options))
+This is a list of options to pass to dpkg. The options must be specified
+using the list notation and each list item is passed as a single arugment
+to dpkg.
+
+dit(bf(Pre-Invoke), bf(Post-Invoke))
+This is a list of shell commands to run before/after invoking dpkg. Like
+bf(Options) this must be specified in list notation. The commands
+are invoked in order using /bin/sh, should any fail APT will abort.
+
+dit(bf(Run-Directory))
+APT chdirs to this directory before invoking dpkg, the default is /.
+
+dit(bf(Build-Options))
+These options are passed to dpkg-buildpackage when compiling packages,
+the default is to disable signing and produce all binaries.
+
+enddit()
+
manpagesection(Debug Options)
Most of the options in the bf(debug) section are not interesting to the
normal user, however bf(Debug::pkgProblemResolver) shows interesting
output about the decisions dist-upgrade makes. bf(Debug::NoLocking)
disables file locking so apt can do some operations as non-root and
-bf(Debug::pkgDPkgPM) will print out the command line for each dpkg invokation.
+bf(Debug::pkgDPkgPM) will print out the command line for each dpkg
+invokation. bf(Debug::IdentCdrom) will disable the inclusion of statfs
+data in CDROM IDs.
manpagesection(EXAMPLES)
bf(/usr/doc/apt/examples/apt.conf) contains a sample configuration file
showing the default values for all possible options.
+manpagesection(FILES)
+/etc/apt/apt.conf
+
manpageseealso()
apt-cache (8),
apt.conf (5)
manpagebugs()
-See http://www.debian.org/Bugs/db/pa/lapt.html. If you wish to report a
+See http://bugs.debian.org/apt. If you wish to report a
bug in bf(apt-get), please see bf(/usr/doc/debian/bug-reporting.txt)
or the bf(bug(1)) command.
HCoop / ntk / apt.git / blobdiff