#define CAPSENSE_KEYMAP_COL_TO_PHYSICAL_COL(col) (col)
// By default we set up for support of xwhatsit's solenoid driver board.
-// Comment out USING_SOLENOID_ENABLE_PIN if you don't have an enable pin:
-#define USING_SOLENOID_ENABLE_PIN B7
+// Comment out HAPTIC_ENABLE_PIN if you don't have an enable pin:
+#define HAPTIC_ENABLE_PIN B7
+// We disable haptic feedbeck during USB low power conditions:
+#define HAPTIC_OFF_IN_LOW_POWER 1
// Change this if you are using a different pin for the solenoid:
#define SOLENOID_PIN B6
-// If you are not using a solenoid then commend out the above, and also in rules.mk, remove "HAPTIC_ENABLE += SOLENOID"
+// If you are not using a solenoid then comment out the above, and also in rules.mk, remove "HAPTIC_ENABLE += SOLENOID"
// You can also tune the following for your solenoid:
-//#define SOLENOID_DEFAULT_DWELL 12
-//#define SOLENOID_MIN_DWELL 4
+#define SOLENOID_DEFAULT_DWELL 4
+#define SOLENOID_MIN_DWELL 4
//#define SOLENOID_MAX_DWELL 100
// If the lock lights are not used, then please don't define the below pins,