-/* Copyright 2016-2017 Erez Zukerman, Jack Humbert
+/* Copyright 2016-2018 Erez Zukerman, Jack Humbert, Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef QUANTUM_H
-#define QUANTUM_H
+#pragma once
#if defined(__AVR__)
-#include <avr/pgmspace.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
+#
include <avr/pgmspace.h>
+#
include <avr/interrupt.h>
#endif
+#if defined(PROTOCOL_CHIBIOS)
+# include "hal.h"
+# include "chibios_config.h"
+#endif
+
#include "wait.h"
#include "matrix.h"
#include "keymap.h"
+
#ifdef BACKLIGHT_ENABLE
- #include "backlight.h"
+# ifdef LED_MATRIX_ENABLE
+# include "ledmatrix.h"
+# else
+# include "backlight.h"
+# endif
+#endif
+
+#if defined(RGBLIGHT_ENABLE)
+# include "rgblight.h"
+#elif defined(RGB_MATRIX_ENABLE)
+// Dummy define RGBLIGHT_MODE_xxxx
+# define RGBLIGHT_H_DUMMY_DEFINE
+# include "rgblight.h"
#endif
-#ifdef RGBLIGHT_ENABLE
- #include "rgblight.h"
+
+#ifdef RGB_MATRIX_ENABLE
+# include "rgb_matrix.h"
#endif
+
#include "action_layer.h"
#include "eeconfig.h"
-#include <stddef.h>
#include "bootloader.h"
#include "timer.h"
#include "config_common.h"
#include "led.h"
#include "action_util.h"
-#include <stdlib.h>
#include "print.h"
+#include "send_string_keycodes.h"
+#include "suspend.h"
+#include <stddef.h>
+#include <stdlib.h>
-
-extern uint32_t default_layer_state;
+extern layer_state_t default_layer_state;
#ifndef NO_ACTION_LAYER
- extern uint32_t layer_state;
+extern layer_state_t layer_state;
#endif
-#ifdef MIDI_ENABLE
- #include <lufa.h>
-#ifdef MIDI_ADVANCED
- #include "process_midi.h"
+#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
+# include "process_midi.h"
#endif
-#endif // MIDI_ENABLE
#ifdef AUDIO_ENABLE
- #include "audio.h"
- #include "process_audio.h"
+# include "audio.h"
+# include "process_audio.h"
+# ifdef AUDIO_CLICKY
+# include "process_clicky.h"
+# endif
#endif
#ifdef STENO_ENABLE
- #include "process_steno.h"
+# include "process_steno.h"
#endif
#if defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
- #include "process_music.h"
+# include "process_music.h"
#endif
-#ifndef DISABLE_LEADER
- #include "process_leader.h"
-#endif
-
-#define DISABLE_CHORDING
-#ifndef DISABLE_CHORDING
- #include "process_chording.h"
+#ifdef LEADER_ENABLE
+# include "process_leader.h"
#endif
#ifdef UNICODE_ENABLE
- #include "process_unicode.h"
+# include "process_unicode.h"
#endif
#ifdef UCIS_ENABLE
- #include "process_ucis.h"
+# include "process_ucis.h"
#endif
#ifdef UNICODEMAP_ENABLE
- #include "process_unicodemap.h"
+# include "process_unicodemap.h"
#endif
-#include "process_tap_dance.h"
+#ifdef TAP_DANCE_ENABLE
+# include "process_tap_dance.h"
+#endif
#ifdef PRINTING_ENABLE
- #include "process_printer.h"
+# include "process_printer.h"
+#endif
+
+#ifdef AUTO_SHIFT_ENABLE
+# include "process_auto_shift.h"
#endif
#ifdef COMBO_ENABLE
- #include "process_combo.h"
+# include "process_combo.h"
+#endif
+
+#ifdef KEY_LOCK_ENABLE
+# include "process_key_lock.h"
+#endif
+
+#ifdef TERMINAL_ENABLE
+# include "process_terminal.h"
+#else
+# include "process_terminal_nop.h"
+#endif
+
+#ifdef SPACE_CADET_ENABLE
+# include "process_space_cadet.h"
+#endif
+
+#ifdef MAGIC_KEYCODE_ENABLE
+# include "process_magic.h"
+#endif
+
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+# include "process_rgb.h"
+#endif
+
+#ifdef HD44780_ENABLE
+# include "hd44780.h"
#endif
-#define SEND_STRING(str) send_string(PSTR(str))
-extern const bool ascii_to_shift_lut[0x80];
-extern const uint8_t ascii_to_keycode_lut[0x80];
+#ifdef HAPTIC_ENABLE
+# include "haptic.h"
+#endif
+
+#ifdef OLED_DRIVER_ENABLE
+# include "oled_driver.h"
+#endif
+
+#ifdef DIP_SWITCH_ENABLE
+# include "dip_switch.h"
+#endif
+
+#ifdef DYNAMIC_MACRO_ENABLE
+# include "process_dynamic_macro.h"
+#endif
+
+#ifdef DYNAMIC_KEYMAP_ENABLE
+# include "dynamic_keymap.h"
+#endif
+
+#ifdef VIA_ENABLE
+# include "via.h"
+#endif
+
+// Function substitutions to ease GPIO manipulation
+#if defined(__AVR__)
+typedef uint8_t pin_t;
+
+# define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF))
+# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
+# define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
+# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+
+# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
+# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
+# define writePin(pin, level) ((level) ? writePinHigh(pin) : writePinLow(pin))
+
+# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
+#elif defined(PROTOCOL_CHIBIOS)
+typedef ioline_t pin_t;
+
+# define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
+# define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
+# define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
+# define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
+
+# define writePinHigh(pin) palSetLine(pin)
+# define writePinLow(pin) palClearLine(pin)
+# define writePin(pin, level) ((level) ? writePinHigh(pin) : writePinLow(pin))
+
+# define readPin(pin) palReadLine(pin)
+#endif
+
+#define SEND_STRING(string) send_string_P(PSTR(string))
+#define SEND_STRING_DELAY(string, interval) send_string_with_delay_P(PSTR(string), interval)
+
+extern const bool ascii_to_shift_lut[128];
+extern const bool ascii_to_altgr_lut[128];
+extern const uint8_t ascii_to_keycode_lut[128];
+
void send_string(const char *str);
void send_string_with_delay(const char *str, uint8_t interval);
+void send_string_P(const char *str);
+void send_string_with_delay_P(const char *str, uint8_t interval);
+void send_char(char ascii_code);
// For tri-layer
-void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
+void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
+layer_state_t update_tri_layer_state(layer_state_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3);
void set_single_persistent_default_layer(uint8_t default_layer);
void tap_random_base64(void);
-#define IS_LAYER_ON(layer) (layer_state & (1UL << (layer)))
+#define IS_LAYER_ON(layer) (layer_state & (1UL << (layer)))
#define IS_LAYER_OFF(layer) (~layer_state & (1UL << (layer)))
-void matrix_init_kb(void);
-void matrix_scan_kb(void);
-void matrix_init_user(void);
-void matrix_scan_user(void);
-bool process_action_kb(keyrecord_t *record);
-bool process_record_kb(uint16_t keycode, keyrecord_t *record);
-bool process_record_user(uint16_t keycode, keyrecord_t *record);
+void matrix_init_kb(void);
+void matrix_scan_kb(void);
+void matrix_init_user(void);
+void matrix_scan_user(void);
+uint16_t get_record_keycode(keyrecord_t *record);
+uint16_t get_event_keycode(keyevent_t event);
+bool process_action_kb(keyrecord_t *record);
+bool process_record_kb(uint16_t keycode, keyrecord_t *record);
+bool process_record_user(uint16_t keycode, keyrecord_t *record);
+
+#ifndef BOOTMAGIC_LITE_COLUMN
+# define BOOTMAGIC_LITE_COLUMN 0
+#endif
+#ifndef BOOTMAGIC_LITE_ROW
+# define BOOTMAGIC_LITE_ROW 0
+#endif
+
+void bootmagic_lite(void);
void reset_keyboard(void);
void startup_user(void);
void shutdown_user(void);
-void register_code16 (uint16_t code);
-void unregister_code16 (uint16_t code);
+void register_code16(uint16_t code);
+void unregister_code16(uint16_t code);
+void tap_code16(uint16_t code);
-#ifdef BACKLIGHT_ENABLE
-void backlight_init_ports(void);
-void backlight_task(void);
-
-#ifdef BACKLIGHT_BREATHING
-void breathing_enable(void);
-void breathing_pulse(void);
-void breathing_disable(void);
-void breathing_self_disable(void);
-void breathing_toggle(void);
-bool is_breathing(void);
-
-void breathing_defaults(void);
-void breathing_intensity_default(void);
-void breathing_speed_default(void);
-void breathing_speed_set(uint8_t value);
-void breathing_speed_inc(uint8_t value);
-void breathing_speed_dec(uint8_t value);
-#endif
-
-#endif
-void send_dword(uint32_t number);
-void send_word(uint16_t number);
-void send_byte(uint8_t number);
-void send_nibble(uint8_t number);
+void send_dword(uint32_t number);
+void send_word(uint16_t number);
+void send_byte(uint8_t number);
+void send_nibble(uint8_t number);
uint16_t hex_to_keycode(uint8_t hex);
void led_set_user(uint8_t usb_led);
void led_set_kb(uint8_t usb_led);
+bool led_update_user(led_t led_state);
+bool led_update_kb(led_t led_state);
void api_send_unicode(uint32_t unicode);
-
-#endif
HCoop / jackhill / qmk / firmware.git / blobdiff