#define USING_SOLENOID_ENABLE_PIN D3
// Change this if you are using a different pin for the solenoid:
#define SOLENOID_PIN D2
-// If you are not using a solenoid then commend out the above, and also in rules.mk, remove "HAPTIC_ENABLE += SOLENOID"
+// If you are not using a solenoid then comment out the above, and also in rules.mk, remove "HAPTIC_ENABLE += SOLENOID"
// You can also tune the following for your solenoid:
//#define SOLENOID_DEFAULT_DWELL 12
//#define SOLENOID_MIN_DWELL 4