KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
# Force expansion
TARGET := $(TARGET)
KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
endif
+
# Pull in rules.mk files from all our subfolders
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
include $(KEYBOARD_PATH_5)/rules.mk
include $(KEYBOARD_PATH_1)/rules.mk
endif
+
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+# Check for keymap.json first, so we can regenerate keymap.c
+include build_json.mk
+
+ifeq ("$(wildcard $(KEYMAP_PATH))", "")
+ # Look through the possible keymap folders until we find a matching keymap.c
+ ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+ else ifneq ($(LAYOUTS),)
+ # If we haven't found a keymap yet fall back to community layouts
+ include build_layout.mk
+ else
+ $(error Could not find keymap)
+ # this state should never be reached
+ endif
+endif
+
+ifeq ($(strip $(CTPC)), yes)
+ CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+ TARGET := $(TARGET)_proton_c
+ include $(STM32_PATH)/proton_c.mk
+ OPT_DEFS += -DCONVERT_TO_PROTON_C
+endif
+
+ifneq ($(FORCE_LAYOUT),)
+ TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+ OPT_DEFS += -DQMK_STM32
+ KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
# Find all the C source files to be compiled in subfolders.
KEYBOARD_SRC :=
# We can assume a ChibiOS target When MCU_FAMILY is defined since it's
# not used for LUFA
ifdef MCU_FAMILY
- FIRMWARE_FORMAT?=bin
PLATFORM=CHIBIOS
+ PLATFORM_KEY=chibios
+ FIRMWARE_FORMAT?=bin
else ifdef ARM_ATSAM
PLATFORM=ARM_ATSAM
+ PLATFORM_KEY=arm_atsam
FIRMWARE_FORMAT=bin
else
PLATFORM=AVR
+ PLATFORM_KEY=avr
FIRMWARE_FORMAT?=hex
endif
-ifeq ($(PLATFORM),CHIBIOS)
- include $(TMK_PATH)/chibios.mk
- OPT_OS = chibios
- ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_4)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_3)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_2)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
- else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
- endif
-endif
-
# Find all of the config.h files and add them to our CONFIG_H define.
CONFIG_H :=
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
CONFIG_H += $(KEYBOARD_PATH_1)/config.h
endif
-# Save the defines and includes here, so we don't include any keymap specific ones
-PROJECT_DEFS := $(OPT_DEFS)
-PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
-PROJECT_CONFIG := $(CONFIG_H)
-
-MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
-
-ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
- -include $(MAIN_KEYMAP_PATH_5)/rules.mk
- KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
- KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
- -include $(MAIN_KEYMAP_PATH_4)/rules.mk
- KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
- KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
- -include $(MAIN_KEYMAP_PATH_3)/rules.mk
- KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
- KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
- -include $(MAIN_KEYMAP_PATH_2)/rules.mk
- KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
- KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
- -include $(MAIN_KEYMAP_PATH_1)/rules.mk
- KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
- KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
-else ifneq ($(LAYOUTS),)
- include build_layout.mk
-else
- $(error Could not find keymap)
- # this state should never be reached
+POST_CONFIG_H :=
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
endif
# Userspace setup and definitions
CONFIG_H += $(USER_PATH)/config.h
endif
-
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
CONFIG_H += $(KEYMAP_PATH)/config.h
endif
-# # project specific files
-SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
+# project specific files
SRC += $(KEYBOARD_SRC) \
$(KEYMAP_C) \
$(QUANTUM_SRC)
# Search Path
VPATH += $(KEYMAP_PATH)
+VPATH += $(USER_PATH)
VPATH += $(KEYBOARD_PATHS)
VPATH += $(COMMON_VPATH)
-VPATH += $(USER_PATH)
include common_features.mk
include $(TMK_PATH)/protocol.mk
include $(TMK_PATH)/common.mk
include bootloader.mk
+SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
SRC += $(TMK_COMMON_SRC)
OPT_DEFS += $(TMK_COMMON_DEFS)
EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
-ifeq ($(PLATFORM),AVR)
-ifeq ($(strip $(PROTOCOL)), VUSB)
- include $(TMK_PATH)/protocol/vusb.mk
+include $(TMK_PATH)/$(PLATFORM_KEY).mk
+ifneq ($(strip $(PROTOCOL)),)
+ include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk
else
- include $(TMK_PATH)/protocol/lufa.mk
-endif
- include $(TMK_PATH)/avr.mk
+ include $(TMK_PATH)/protocol/$(PLATFORM_KEY).mk
endif
-ifeq ($(PLATFORM),ARM_ATSAM)
- include $(TMK_PATH)/arm_atsam.mk
- include $(TMK_PATH)/protocol/arm_atsam.mk
-endif
-
-ifeq ($(PLATFORM),CHIBIOS)
- include $(TMK_PATH)/protocol/chibios.mk
-endif
+# TODO: remove this bodge?
+PROJECT_DEFS := $(OPT_DEFS)
+PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
+PROJECT_CONFIG := $(CONFIG_H)
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
include $(VISUALIZER_PATH)/visualizer.mk
endif
+CONFIG_H += $(POST_CONFIG_H)
ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
# Default target.
all: build check-size
build: elf cpfirmware
+check-size: build
+objs-size: build
+include show_options.mk
include $(TMK_PATH)/rules.mk
HCoop / jackhill / qmk / firmware.git / blobdiff