-
ifneq ($(findstring STM32F303, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
## chip/board settings
# - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY ?= STM32
- MCU_SERIES ?= STM32F3xx
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F3xx
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <this_dir>/ld/
+ # or <keyboard_dir>/ld/
MCU_LDSCRIPT ?= STM32F303xC
# Startup code to use
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
MCU_STARTUP ?= stm32f3xx
- # Board: it should exist either in <chibios>/os/hal/boards/
- # or <this_dir>/boards
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
BOARD ?= GENERIC_STM32_F303XC
+ USE_FPU ?= yes
+
+ # Options to pass to dfu-util when flashing
+ DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
+ DFU_SUFFIX_ARGS ?= -v 0483 -p df11
+endif
+
+ifneq ($(findstring STM32F072, $(MCU)),)
# Cortex version
- MCU = cortex-m4
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F0xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F072xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f0xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= ST_STM32F072B_DISCOVERY
+
+ USE_FPU ?= no
+
+ # Options to pass to dfu-util when flashing
+ DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
+ DFU_SUFFIX_ARGS ?= -v 0483 -p df11
+endif
+
+ifneq ($(findstring STM32F042, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F0xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F042x6
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f0xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F042X6
+
+ USE_FPU ?= no
+
+ # Options to pass to dfu-util when flashing
+ DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
+ DFU_SUFFIX_ARGS ?= -v 0483 -p df11
+endif
+
+ifneq ($(findstring STM32F103, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV ?= 7
+ ARMV = 7
- USE_FPU = yes
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F1xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F103x8
- # Vector table for application
- # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
- # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
- # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f1xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F103
+
+ USE_FPU ?= no
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
+ DFU_SUFFIX_ARGS ?= -v 0483 -p df11
endif
-ifneq (,$(filter $(MCU),atmega32u4 at90usb1286))
+ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286))
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
- ARCH ?= AVR8
+ ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB ?= $(F_CPU)
+
+ # Interrupt driven control endpoint task
+ ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes))
+ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+ endif
+endif
+
+ifneq (,$(filter $(MCU),atmega32a))
+ # MCU name for avrdude
+ AVRDUDE_MCU = m32
+
+ PROTOCOL = VUSB
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ F_CPU ?= 12000000
+
+ # unsupported features for now
+ NO_UART ?= yes
+ NO_SUSPEND_POWER_DOWN ?= yes
+endif
+
+ifneq (,$(filter $(MCU),atmega328p))
+ # MCU name for avrdude
+ AVRDUDE_MCU = m328p
+
+ PROTOCOL = VUSB
+
+ # Processor frequency.
+ # This will define a symbol, F_CPU, in all source code files equal to the
+ # processor frequency in Hz. You can then use this symbol in your source code to
+ # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+ # automatically to create a 32-bit value in your source code.
+ F_CPU ?= 16000000
+
+ # unsupported features for now
+ NO_UART ?= yes
+ NO_SUSPEND_POWER_DOWN ?= yes
endif
HCoop / jackhill / qmk / firmware.git / blobdiff