Commit | Line | Data |
---|---|---|
9fdaaf7d PA |
1 | /* |
2 | Copyright 2020 Purdea Andrei | |
3 | ||
4 | This program is free software: you can redistribute it and/or modify | |
5 | it under the terms of the GNU General Public License as published by | |
6 | the Free Software Foundation, either version 2 of the License, or | |
7 | (at your option) any later version. | |
8 | ||
9 | This program is distributed in the hope that it will be useful, | |
10 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | GNU General Public License for more details. | |
13 | ||
14 | You should have received a copy of the GNU General Public License | |
15 | along with this program. If not, see <http://www.gnu.org/licenses/>. | |
16 | */ | |
17 | ||
18 | #pragma once | |
19 | ||
20 | #include "config_common.h" | |
21 | ||
22 | /* USB Device descriptor parameter */ | |
23 | #define VENDOR_ID 0x0481 | |
24 | #define PRODUCT_ID 0x0002 | |
25 | #define DEVICE_VER 0x0001 | |
26 | #define MANUFACTURER Tom Wong-Cornall/Purdea Andrei | |
27 | #define PRODUCT IBM Model F AT | |
28 | #define DESCRIPTION QMK firmware for the IBM Model F AT keyboard using the original Xwhatsit model F controller PCB | |
29 | ||
30 | /* key matrix size */ | |
31 | #define MATRIX_ROWS 8 | |
32 | #define MATRIX_COLS 16 | |
33 | // Note: there is a column that is only used for calibration pads. That one is not listed here. | |
34 | ||
35 | /* | |
36 | * Keyboard Matrix Assignments | |
37 | * | |
38 | * Change this to how you wired your keyboard | |
39 | * COLS: AVR pins used for columns, left to right | |
40 | * ROWS: AVR pins used for rows, top to bottom | |
41 | * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |
42 | * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |
43 | * | |
44 | */ | |
45 | //#define MATRIX_ROW_PINS { D0, D5 } | |
46 | //#define MATRIX_COL_PINS { B2, B1, B0 } | |
47 | //#define UNUSED_PINS | |
48 | ||
49 | /* COL2ROW, ROW2COL*/ | |
50 | //#define DIODE_DIRECTION COL2ROW | |
51 | ||
52 | /* | |
53 | * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |
54 | */ | |
55 | #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |
56 | ||
57 | // #define BACKLIGHT_PIN B7 | |
58 | // #define BACKLIGHT_BREATHING | |
59 | // #define BACKLIGHT_LEVELS 3 | |
60 | ||
61 | // #define RGB_DI_PIN E2 | |
62 | // #ifdef RGB_DI_PIN | |
63 | // #define RGBLED_NUM 16 | |
64 | // #define RGBLIGHT_HUE_STEP 8 | |
65 | // #define RGBLIGHT_SAT_STEP 8 | |
66 | // #define RGBLIGHT_VAL_STEP 8 | |
67 | // #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |
68 | // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |
69 | // /*== all animations enable ==*/ | |
70 | // #define RGBLIGHT_ANIMATIONS | |
71 | // /*== or choose animations ==*/ | |
72 | // #define RGBLIGHT_EFFECT_BREATHING | |
73 | // #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |
74 | // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |
75 | // #define RGBLIGHT_EFFECT_SNAKE | |
76 | // #define RGBLIGHT_EFFECT_KNIGHT | |
77 | // #define RGBLIGHT_EFFECT_CHRISTMAS | |
78 | // #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |
79 | // #define RGBLIGHT_EFFECT_RGB_TEST | |
80 | // #define RGBLIGHT_EFFECT_ALTERNATING | |
81 | // /*== customize breathing effect ==*/ | |
82 | // /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |
83 | // #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |
84 | // /*==== use exp() and sin() ====*/ | |
85 | // #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |
86 | // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |
87 | // #endif | |
88 | ||
89 | /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |
90 | #define DEBOUNCE 5 | |
91 | ||
92 | /* define if matrix has ghost (lacks anti-ghosting diodes) */ | |
93 | //#define MATRIX_HAS_GHOST | |
94 | ||
95 | /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |
96 | #define LOCKING_SUPPORT_ENABLE | |
97 | /* Locking resynchronize hack */ | |
98 | #define LOCKING_RESYNC_ENABLE | |
99 | ||
100 | /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |
101 | * This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |
102 | */ | |
103 | // #define GRAVE_ESC_CTRL_OVERRIDE | |
104 | ||
105 | /* | |
106 | * Force NKRO | |
107 | * | |
108 | * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |
109 | * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |
110 | * makefile for this to work.) | |
111 | * | |
112 | * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |
113 | * until the next keyboard reset. | |
114 | * | |
115 | * NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |
116 | * fully operational during normal computer usage. | |
117 | * | |
118 | * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |
119 | * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |
120 | * bootmagic, NKRO mode will always be enabled until it is toggled again during a | |
121 | * power-up. | |
122 | * | |
123 | */ | |
124 | //#define FORCE_NKRO | |
125 | ||
126 | /* | |
127 | * Magic Key Options | |
128 | * | |
129 | * Magic keys are hotkey commands that allow control over firmware functions of | |
130 | * the keyboard. They are best used in combination with the HID Listen program, | |
131 | * found here: https://www.pjrc.com/teensy/hid_listen.html | |
132 | * | |
133 | * The options below allow the magic key functionality to be changed. This is | |
134 | * useful if your keyboard/keypad is missing keys and you want magic key support. | |
135 | * | |
136 | */ | |
137 | ||
138 | /* key combination for magic key command */ | |
139 | /* defined by default; to change, uncomment and set to the combination you want */ | |
140 | // #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) | |
141 | ||
142 | /* control how magic key switches layers */ | |
143 | //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |
144 | //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |
145 | //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |
146 | ||
147 | /* override magic key keymap */ | |
148 | //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |
149 | //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |
150 | //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |
151 | //#define MAGIC_KEY_HELP H | |
152 | //#define MAGIC_KEY_HELP_ALT SLASH | |
153 | //#define MAGIC_KEY_DEBUG D | |
154 | //#define MAGIC_KEY_DEBUG_MATRIX X | |
155 | //#define MAGIC_KEY_DEBUG_KBD K | |
156 | //#define MAGIC_KEY_DEBUG_MOUSE M | |
157 | //#define MAGIC_KEY_VERSION V | |
158 | //#define MAGIC_KEY_STATUS S | |
159 | //#define MAGIC_KEY_CONSOLE C | |
160 | //#define MAGIC_KEY_LAYER0 0 | |
161 | //#define MAGIC_KEY_LAYER0_ALT GRAVE | |
162 | //#define MAGIC_KEY_LAYER1 1 | |
163 | //#define MAGIC_KEY_LAYER2 2 | |
164 | //#define MAGIC_KEY_LAYER3 3 | |
165 | //#define MAGIC_KEY_LAYER4 4 | |
166 | //#define MAGIC_KEY_LAYER5 5 | |
167 | //#define MAGIC_KEY_LAYER6 6 | |
168 | //#define MAGIC_KEY_LAYER7 7 | |
169 | //#define MAGIC_KEY_LAYER8 8 | |
170 | //#define MAGIC_KEY_LAYER9 9 | |
171 | //#define MAGIC_KEY_BOOTLOADER B | |
172 | //#define MAGIC_KEY_BOOTLOADER_ALT ESC | |
173 | //#define MAGIC_KEY_LOCK CAPS | |
174 | //#define MAGIC_KEY_EEPROM E | |
175 | //#define MAGIC_KEY_EEPROM_CLEAR BSPACE | |
176 | //#define MAGIC_KEY_NKRO N | |
177 | //#define MAGIC_KEY_SLEEP_LED Z | |
178 | ||
179 | /* | |
180 | * Feature disable options | |
181 | * These options are also useful to firmware size reduction. | |
182 | */ | |
183 | ||
184 | /* disable debug print */ | |
185 | //#define NO_DEBUG | |
186 | ||
187 | /* disable print */ | |
188 | //#define NO_PRINT | |
189 | ||
190 | /* disable action features */ | |
191 | //#define NO_ACTION_LAYER | |
192 | //#define NO_ACTION_TAPPING | |
193 | //#define NO_ACTION_ONESHOT | |
194 | ||
195 | /* disable these deprecated features by default */ | |
196 | #ifndef LINK_TIME_OPTIMIZATION_ENABLE | |
197 | #define NO_ACTION_MACRO | |
198 | #define NO_ACTION_FUNCTION | |
199 | #endif | |
200 | /* | |
201 | * MIDI options | |
202 | */ | |
203 | ||
204 | /* Prevent use of disabled MIDI features in the keymap */ | |
205 | //#define MIDI_ENABLE_STRICT 1 | |
206 | ||
207 | /* enable basic MIDI features: | |
208 | - MIDI notes can be sent when in Music mode is on | |
209 | */ | |
210 | //#define MIDI_BASIC | |
211 | ||
212 | /* enable advanced MIDI features: | |
213 | - MIDI notes can be added to the keymap | |
214 | - Octave shift and transpose | |
215 | - Virtual sustain, portamento, and modulation wheel | |
216 | - etc. | |
217 | */ | |
218 | //#define MIDI_ADVANCED | |
219 | ||
220 | /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |
221 | //#define MIDI_TONE_KEYCODE_OCTAVES 1 | |
222 | ||
223 | /* | |
224 | * HD44780 LCD Display Configuration | |
225 | */ | |
226 | /* | |
227 | #define LCD_LINES 2 //< number of visible lines of the display | |
228 | #define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |
229 | ||
230 | #define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |
231 | ||
232 | #if LCD_IO_MODE | |
233 | #define LCD_PORT PORTB //< port for the LCD lines | |
234 | #define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |
235 | #define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |
236 | #define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |
237 | #define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |
238 | #define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |
239 | #define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |
240 | #define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |
241 | #define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |
242 | #define LCD_RS_PORT LCD_PORT //< port for RS line | |
243 | #define LCD_RS_PIN 3 //< pin for RS line | |
244 | #define LCD_RW_PORT LCD_PORT //< port for RW line | |
245 | #define LCD_RW_PIN 2 //< pin for RW line | |
246 | #define LCD_E_PORT LCD_PORT //< port for Enable line | |
247 | #define LCD_E_PIN 1 //< pin for Enable line | |
248 | #endif | |
249 | */ | |
250 | ||
251 | /* Bootmagic Lite key configuration */ | |
252 | // #define BOOTMAGIC_LITE_ROW 0 | |
253 | // #define BOOTMAGIC_LITE_COLUMN 0 | |
254 | ||
255 | #define CONTROLLER_IS_XWHATSIT_MODEL_F_OR_WCASS_MODEL_F | |
256 | //#define CONTROLLER_IS_XWHATSIT_BEAMSPRING_REV_4 | |
257 | //#define CONTROLLER_IS_THROUGH_HOLE_BEAMSPRING | |
258 | //#define CONTROLLER_IS_THROUGH_HOLE_MODEL_F | |
259 | ||
260 | #define CAPSENSE_KEYBOARD_SETTLE_TIME_US 8 | |
261 | #define CAPSENSE_DAC_SETTLE_TIME_US 8 | |
262 | #define CAPSENSE_HARDCODED_SAMPLE_TIME 4 | |
263 | ||
264 | #define CAPSENSE_CAL_ENABLED 1 | |
265 | // #define CAPSENSE_CAL_ENABLED 0 | |
266 | #define CAPSENSE_CAL_DEBUG 1 | |
267 | // #define CAPSENSE_CAL_DEBUG 0 | |
268 | #define CAPSENSE_CAL_INIT_REPS 16 | |
269 | #define CAPSENSE_CAL_EACHKEY_REPS 16 | |
e2e24f09 | 270 | #define CAPSENSE_CAL_BINS 5 |
e5f57ee7 | 271 | #define CAPSENSE_CAL_THRESHOLD_OFFSET 24 |
9fdaaf7d PA |
272 | |
273 | #if !CAPSENSE_CAL_ENABLED | |
274 | #define CAPSENSE_HARDCODED_THRESHOLD 142 | |
275 | #endif | |
276 | ||
277 | #define CAPSENSE_KEYMAP_COL_TO_PHYSICAL_COL(col) (col) | |
278 | ||
279 | // By default we set up for support of xwhatsit's solenoid driver board. | |
280 | // Comment out USING_SOLENOID_ENABLE_PIN if you don't have an enable pin: | |
281 | #define USING_SOLENOID_ENABLE_PIN B7 | |
282 | // Change this if you are using a different pin for the solenoid: | |
283 | #define SOLENOID_PIN B6 | |
284 | // If you are not using a solenoid then commend out the above, and also in rules.mk, remove "HAPTIC_ENABLE += SOLENOID" | |
285 | // You can also tune the following for your solenoid: | |
286 | //#define SOLENOID_DEFAULT_DWELL 12 | |
287 | //#define SOLENOID_MIN_DWELL 4 | |
288 | //#define SOLENOID_MAX_DWELL 100 | |
289 | ||
03a454e1 PA |
290 | // If the lock lights are not used, then please don't define the below pins, |
291 | // or leave them set as unused pins: | |
292 | ||
293 | // The following definitions match the lock lights as used by the original | |
294 | // xwhatsit firmware, but enabling all three of these is not compatible with | |
295 | // standard solenoid support, because B6 and B7 pins are already in use: | |
296 | //#define LED_NUM_LOCK_PIN B5 | |
297 | //#define LED_CAPS_LOCK_PIN B6 | |
298 | //#define LED_SCROLL_LOCK_PIN B4 | |
299 | // Since solenoid support is enabled by default, the above lock light pin | |
300 | // assignments are disabled by default. | |
301 | // Instead the more common Num Lock and Caps Lock are assigned the following | |
302 | // way by default, and this can be used in combination with the solenoid: | |
303 | #define LED_NUM_LOCK_PIN B4 | |
304 | #define LED_CAPS_LOCK_PIN B5 | |
305 | ||
306 | // Uncomment below if the leds are on when the pin is driving zero: | |
307 | //#define LED_NUM_LOCK_ACTIVE_LOW | |
308 | //#define LED_CAPS_LOCK_ACTIVE_LOW | |
309 | //#define LED_SCROLL_LOCK_ACTIVE_LOW | |
310 | ||
9fdaaf7d | 311 | #include "../../../post_config.h" |