HCoop / jackhill / qmk / firmware.git / blame
| Commit | Line | Data |
|---|---|---|
| 6fa3cfbf | 1 | # project specific files |
| bffbb4b4 W |
2 | SRC = keyboards/wilba_tech/wt_main.c \ |
| 3 | keyboards/wilba_tech/wt_rgb_backlight.c \ | |
| 2bfac351 | 4 | drivers/issi/is31fl3733.c \ |
| 5 | quantum/color.c \ | |
| 6 | drivers/arm/i2c_master.c | |
| 6fa3cfbf | 7 | |
| 8 | ## chip/board settings | |
| 9 | # the next two should match the directories in | |
| 10 | # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |
| 11 | MCU_FAMILY = STM32 | |
| 12 | MCU_SERIES = STM32F3xx | |
| 13 | ||
| 14 | # Linker script to use | |
| 15 | # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |
| 16 | # or <this_dir>/ld/ | |
| 17 | MCU_LDSCRIPT = STM32F303xC | |
| 18 | ||
| 19 | # Startup code to use | |
| 20 | # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ | |
| 21 | MCU_STARTUP = stm32f3xx | |
| 22 | ||
| 23 | # Board: it should exist either in <chibios>/os/hal/boards/ | |
| 24 | # or <this_dir>/boards | |
| 25 | BOARD = GENERIC_STM32_F303XC | |
| 26 | ||
| 27 | # Cortex version | |
| 28 | MCU = cortex-m4 | |
| 29 | ||
| 30 | # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |
| 31 | ARMV = 7 | |
| 32 | ||
| 33 | USE_FPU = yes | |
| 34 | ||
| 35 | # Vector table for application | |
| 36 | # 0x00000000-0x00001000 area is occupied by bootlaoder.*/ | |
| 37 | # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB | |
| 38 | # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 | |
| 39 | OPT_DEFS = | |
| 40 | ||
| 41 | # Do not put the microcontroller into power saving mode | |
| 42 | # when we get USB suspend event. We want it to keep updating | |
| 43 | # backlight effects. | |
| 44 | OPT_DEFS += -DNO_SUSPEND_POWER_DOWN | |
| 45 | ||
| 46 | # Options to pass to dfu-util when flashing | |
| 47 | DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave | |
| 41beecfc | 48 | DFU_SUFFIX_ARGS = -p DF11 -v 0483 |
| 6fa3cfbf | 49 | |
| 50 | # Build Options | |
| 51 | # comment out to disable the options. | |
| 52 | # | |
| 2bfac351 | 53 | BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality |
| 54 | BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |
| 6fa3cfbf | 55 | MOUSEKEY_ENABLE = yes # Mouse keys |
| 56 | EXTRAKEY_ENABLE = yes # Audio control and System control | |
| 57 | CONSOLE_ENABLE = no # Console for debug | |
| 58 | COMMAND_ENABLE = no # Commands for debug and configuration | |
| 2bfac351 | 59 | SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend |
| 6fa3cfbf | 60 | NKRO_ENABLE = yes # USB Nkey Rollover |
| 2bfac351 | 61 | AUDIO_ENABLE = no # Audio output on port C6 |
| 6fa3cfbf | 62 | NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in |
| 63 | #SERIAL_LINK_ENABLE = yes | |
| 2bfac351 | 64 | |
| 3e8ee96b | 65 | RAW_ENABLE = no |
| 66 | DYNAMIC_KEYMAP_ENABLE = no | |
| 2bfac351 | 67 | CIE1931_CURVE = yes |