Copyright @copyright{} 2015, 2016 Mathieu Lirzin@*
Copyright @copyright{} 2014 Pierre-Antoine Rault@*
Copyright @copyright{} 2015 Taylan Ulrich Bayırlı/Kammer@*
-Copyright @copyright{} 2015, 2016, 2017 Leo Famulari@*
+Copyright @copyright{} 2015, 2016, 2017, 2019 Leo Famulari@*
Copyright @copyright{} 2015, 2016, 2017, 2018, 2019 Ricardo Wurmus@*
Copyright @copyright{} 2016 Ben Woodcroft@*
Copyright @copyright{} 2016, 2017, 2018 Chris Marusich@*
@noindent
and rerun the @code{gpg --verify} command.
+
+Take note that a warning like ``This key is not certified with a trusted
+signature!'' is normal.
+
@c end authentication part
@item
@c FIXME: Specify a version number once a release has been made.
@uref{https://gitlab.com/guile-git/guile-git, Guile-Git}, from August
2017 or later;
-@item @uref{https://savannah.nongnu.org/projects/guile-json/, Guile-JSON};
+@item @uref{https://savannah.nongnu.org/projects/guile-json/, Guile-JSON} 3.x;
@item @url{https://zlib.net, zlib};
@item @url{https://www.gnu.org/software/make/, GNU Make}.
@end itemize
@noindent
and rerun the @code{gpg --verify} command.
+
+Take note that a warning like ``This key is not certified with a trusted
+signature!'' is normal.
+
@c end duplication
This image contains the tools necessary for an installation.
In its @code{configure} phase, this build system will make any source inputs
specified in the @code{#:cargo-inputs} and @code{#:cargo-development-inputs}
-parameters available to cargo. The @code{install} phase installs any crate
-the binaries if they are defined by the crate.
+parameters available to cargo. The @code{update-cargo-lock} phase will,
+when there is a @code{Cargo.lock} file, update the @code{Cargo.lock} file
+with the inputs and their versions available at build time. The
+@code{install} phase installs any crate the binaries if they are defined by
+the crate.
@end defvr
@cindex Clojure (programming language)
linux-module-build-system, use the key #:linux to specify it).
@end defvr
+@defvr {Scheme Variable} node-build-system
+This variable is exported by @code{(guix build-system node)}. It
+implements the build procedure used by @uref{http://nodejs.org,
+Node.js}, which implements an approximation of the @code{npm install}
+command, followed by an @code{npm test} command.
+
+Which Node.js package is used to interpret the @code{npm} commands can
+be specified with the @code{#:node} parameter which defaults to
+@code{node}.
+@end defvr
+
Lastly, for packages that do not need anything as sophisticated, a
``trivial'' build system is provided. It is trivial in the sense that
it provides basically no support: it does not pull any implicit inputs,
@end deffn
@deffn {Monadic Procedure} gexp->script @var{name} @var{exp} @
- [#:guile (default-guile)] [#:module-path %load-path]
+ [#:guile (default-guile)] [#:module-path %load-path] @
+ [#:system (%current-system)] [#:target #f]
Return an executable script @var{name} that runs @var{exp} using
@var{guile}, with @var{exp}'s imported modules in its search path.
Look up @var{exp}'s modules in @var{module-path}.
@item --with-commit=@var{package}=@var{commit}
This is similar to @code{--with-branch}, except that it builds from
@var{commit} rather than the tip of a branch. @var{commit} must be a valid
-Git commit SHA1 identifier.
+Git commit SHA1 identifier or a tag.
@end table
@node Additional Build Options
"synopsis": "Hello, GNU world: An example GNU package",
"description": "GNU Hello prints a greeting.",
"license": "GPL-3.0+",
- "native-inputs": ["gcc@@6"]
+ "native-inputs": ["gettext"]
@}
@end example
key configuration in @file{/etc/knot/secrets.conf} and add this file
to the @code{includes} list.
+One can generate a secret tsig key (for nsupdate and zone transfers with the
+keymgr command from the knot package. Note that the package is not automatically
+installed by the service. The following example shows how to generate a new
+tsig key:
+
+@example
+keymgr -t mysecret > /etc/knot/secrets.conf
+chmod 600 /etc/knot/secrets.conf
+@end example
+
+Also note that the generated key will be named @var{mysecret}, so it is the
+name that needs to be used in the @var{key} field of the
+@code{knot-acl-configuration} record and in other places that need to refer
+to that key.
+
It can also be used to add configuration not supported by this interface.
@item @code{listen-v4} (default: @code{"0.0.0.0"})
@item @code{port} (default: @code{8081})
Port number used by the HTTP server.
-@item --listen=@var{host}
+@item @code{host} (default: @code{"localhost"})
Listen on the network interface for @var{host}. The default is to
accept connections from localhost.
%base-services))))
(list (machine
- (system %system)
+ (operating-system %system)
(environment managed-host-environment-type)
(configuration (machine-ssh-configuration
(host-name "localhost")
a Virtual Private Server (VPS) provider. In such a case, a different
@var{environment} type would be used.
+Do note that you first need to generate a key pair on the coordinator machine
+to allow the daemon to export signed archives of files from the store
+(@pxref{Invoking guix archive}).
+
+@example
+# guix archive --generate-key
+@end example
+
+@noindent
+Each target machine must authorize the key of the master machine so that it
+accepts store items it receives from the coordinator:
+
+@example
+# guix archive --authorize < coordinator-public-key.txt
+@end example
+
@deftp {Data Type} machine
This is the data type representing a single machine in a heterogeneous Guix
deployment.
@table @asis
-@item @code{system}
+@item @code{operating-system}
The object of the operating system configuration to deploy.
@item @code{environment}
@xref{Invoking guix lint}, for more information.
-@quotation Note
-As of version @value{VERSION}, the feature described below is considered
-``beta''.
-@end quotation
-
Guix follows a functional
package management discipline (@pxref{Introduction}), which implies
that, when a package is changed, @emph{every package that depends on it}
HCoop / jackhill / guix / guix.git / blobdiff