We want to provide a warm, friendly, and harassment-free environment, so
that anyone can contribute to the best of their abilities. To this end
our project uses a ``Contributor Covenant'', which was adapted from
-@url{http://contributor-covenant.org/}. You can find a local version in
+@url{https://contributor-covenant.org/}. You can find a local version in
the @file{CODE-OF-CONDUCT} file in the source tree.
Contributors are not required to use their legal name in patches and
@code{3CE464558A84FDC69DB40CFB090B11993D9AEBB5} (you may need to fetch
this key from a key server, if you have not done it yet).
-From there on, you can authenticate all the commits included in your
-checkout by running:
-
-@example
-make authenticate
-@end example
-
-The first run takes a couple of minutes, but subsequent runs are faster.
-
-@quotation Note
-You are advised to run @command{make authenticate} after every
-@command{git pull} invocation. This ensures you keep receiving valid
-changes to the repository
-@end quotation
-
The easiest way to set up a development environment for Guix is, of
course, by using Guix! The following command starts a new shell where
all the dependencies and appropriate environment variables are set up to
installation instructions (@pxref{Requirements}).
@itemize
-@item @url{http://gnu.org/software/autoconf/, GNU Autoconf};
-@item @url{http://gnu.org/software/automake/, GNU Automake};
-@item @url{http://gnu.org/software/gettext/, GNU Gettext};
-@item @url{http://gnu.org/software/texinfo/, GNU Texinfo};
-@item @url{http://www.graphviz.org/, Graphviz};
-@item @url{http://www.gnu.org/software/help2man/, GNU Help2man (optional)}.
+@item @url{https://gnu.org/software/autoconf/, GNU Autoconf};
+@item @url{https://gnu.org/software/automake/, GNU Automake};
+@item @url{https://gnu.org/software/gettext/, GNU Gettext};
+@item @url{https://gnu.org/software/texinfo/, GNU Texinfo};
+@item @url{https://www.graphviz.org/, Graphviz};
+@item @url{https://www.gnu.org/software/help2man/, GNU Help2man (optional)}.
@end itemize
On Guix, extra dependencies can be added by instead running @command{guix
fails, take a look at installation instructions (@pxref{Installation})
or send a message to the @email{guix-devel@@gnu.org, mailing list}.
+From there on, you can authenticate all the commits included in your
+checkout by running:
+
+@example
+make authenticate
+@end example
+
+The first run takes a couple of minutes, but subsequent runs are faster.
+
+@quotation Note
+You are advised to run @command{make authenticate} after every
+@command{git pull} invocation. This ensures you keep receiving valid
+changes to the repository.
+@end quotation
+
@node Running Guix Before It Is Installed
@section Running Guix Before It Is Installed
The Perfect Setup to hack on Guix is basically the perfect setup used
for Guile hacking (@pxref{Using Guile in Emacs,,, guile, Guile Reference
Manual}). First, you need more than an editor, you need
-@url{http://www.gnu.org/software/emacs, Emacs}, empowered by the
-wonderful @url{http://nongnu.org/geiser/, Geiser}. To set that up, run:
+@url{https://www.gnu.org/software/emacs, Emacs}, empowered by the
+wonderful @url{https://nongnu.org/geiser/, Geiser}. To set that up, run:
@example
guix package -i emacs guile emacs-geiser
To actually edit the code, Emacs already has a neat Scheme mode. But in
addition to that, you must not miss
-@url{http://www.emacswiki.org/emacs/ParEdit, Paredit}. It provides
+@url{https://www.emacswiki.org/emacs/ParEdit, Paredit}. It provides
facilities to directly operate on the syntax tree, such as raising an
s-expression or wrapping it, swallowing or rejecting the following
s-expression, etc.
@cindex reducing boilerplate
We also provide templates for common git commit messages and package
definitions in the @file{etc/snippets} directory. These templates can
-be used with @url{http://joaotavora.github.io/yasnippet/, YASnippet} to
+be used with @url{https://joaotavora.github.io/yasnippet/, YASnippet} to
expand short trigger strings to interactive text snippets. You may want
to add the snippets directory to the @var{yas-snippet-dirs} variable in
Emacs.
@code{origin} snippet in turn may insert other trigger strings ending on
@code{...}, which also can be expanded further.
+@cindex insert or update copyright
+@cindex @code{M-x guix-copyright}
+@cindex @code{M-x copyright-update}
+Additionaly we provide insertion and automatic update of a copyright in
+@file{etc/copyright.el}. You may want to set your full name, mail, and
+load a file.
+
+@lisp
+(setq user-full-name "Alice Doe")
+(setq user-mail-address "alice@@mail.org")
+;; @r{Assuming the Guix checkout is in ~/src/guix.}
+(load-file "~/src/guix/etc/copyright.el")
+@end lisp
+
+To insert a copyright at the current line invoke @code{M-x guix-copyright}.
+
+To update a copyright you need to specify a @code{copyright-names-regexp}.
+
+@lisp
+(setq copyright-names-regexp
+ (format "%s <%s>" user-full-name user-mail-address))
+@end lisp
+
+You can check if your copyright is up to date by evaluating @code{M-x
+copyright-update}. If you want to do it automatically after each buffer
+save then add @code{(add-hook 'after-save-hook 'copyright-update)} in
+Emacs.
@node Packaging Guidelines
@section Packaging Guidelines
* Python Modules:: A touch of British comedy.
* Perl Modules:: Little pearls.
* Java Packages:: Coffee break.
+* Rust Crates:: Beware of oxidation.
* Fonts:: Fond of fonts.
@end menu
@cindex free software
The GNU operating system has been developed so that users can have
freedom in their computing. GNU is @dfn{free software}, meaning that
-users have the @url{http://www.gnu.org/philosophy/free-sw.html,four
+users have the @url{https://www.gnu.org/philosophy/free-sw.html,four
essential freedoms}: to run the program, to study and change the program
in source code form, to redistribute exact copies, and to distribute
modified versions. Packages found in the GNU distribution provide only
software that conveys these four freedoms.
In addition, the GNU distribution follow the
-@url{http://www.gnu.org/distros/free-system-distribution-guidelines.html,free
+@url{https://www.gnu.org/distros/free-system-distribution-guidelines.html,free
software distribution guidelines}. Among other things, these guidelines
reject non-free firmware, recommendations of non-free software, and
discuss ways to deal with trademarks and patents.
field to, say, 7 digits. It avoids an aesthetic annoyance (assuming
aesthetics have a role to play here) as well as problems related to OS
limits such as the maximum shebang length (127 bytes for the Linux
-kernel.) It is best to use the full commit identifiers in
+kernel). It is best to use the full commit identifiers in
@code{origin}s, though, to avoid ambiguities. A typical package
definition may look like this:
appropriately.
Synopses and descriptions are translated by volunteers
-@uref{http://translationproject.org/domain/guix-packages.html, at the
+@uref{https://translationproject.org/domain/guix-packages.html, at the
Translation Project} so that as many users as possible can read them in
their native language. User interfaces search them and display them in
the language specified by the current locale.
seems desirable that the name of a package for a Python module contains
the word @code{python}.
-Some modules are compatible with only one version of Python, others with both.
-If the package Foo compiles only with Python 3, we name it
-@code{python-foo}; if it compiles only with Python 2, we name it
-@code{python2-foo}. If it is compatible with both versions, we create two
-packages with the corresponding names.
+Some modules are compatible with only one version of Python, others with
+both. If the package Foo is compiled with Python 3, we name it
+@code{python-foo}. If it is compiled with Python 2, we name it
+@code{python2-foo}. Packages should be added when they are necessary;
+we don't add Python 2 variants of the package unless we are going to use
+them.
If a project already contains the word @code{python}, we drop this;
for instance, the module python-dateutil is packaged under the names
@code{java-apache-commons-cli}.
+@node Rust Crates
+@subsection Rust Crates
+
+@cindex rust
+Rust programs standing for themselves are named as any other package, using the
+lowercase upstream name.
+
+To prevent namespace collisions we prefix all other Rust packages with the
+@code{rust-} prefix. The name should be changed to lowercase as appropriate and
+dashes should remain in place.
+
+In the rust ecosystem it is common for multiple incompatible versions of a
+package to be used at any given time, so all packages should have a versioned
+suffix. If a package has passed version 1.0.0 then just the major version
+number is sufficient (e.g.@: @code{rust-clap-2}), otherwise the version suffix
+should contain both the major and minor version (e.g.@: @code{rust-rand-0.6}).
+
+Because of the difficulty in reusing rust packages as pre-compiled inputs for
+other packages the Cargo build system (@pxref{Build Systems,
+@code{cargo-build-system}}) presents the @code{#:cargo-inputs} and
+@code{cargo-development-inputs} keywords as build system arguments. It would be
+helpful to think of these as similar to @code{propagated-inputs} and
+@code{native-inputs}. Rust @code{dependencies} and @code{build-dependencies}
+should go in @code{#:cargo-inputs}, and @code{dev-dependencies} should go in
+@code{#:cargo-development-inputs}. If a Rust package links to other libraries
+then the standard placement in @code{inputs} and the like should be used.
+
+Care should be taken to ensure the correct version of dependencies are used; to
+this end we try to refrain from skipping the tests or using @code{#:skip-build?}
+when possible. Of course this is not always possible, as the package may be
+developed for a different Operating System, depend on features from the Nightly
+Rust compiler, or the test suite may have atrophied since it was released.
+
+
@node Fonts
@subsection Fonts
@cindex coding style
When writing Scheme code, we follow common wisdom among Scheme
programmers. In general, we follow the
-@url{http://mumble.net/~campbell/scheme/style.txt, Riastradh's Lisp
+@url{https://mumble.net/~campbell/scheme/style.txt, Riastradh's Lisp
Style Rules}. This document happens to describe the conventions mostly
used in Guile’s code too. It is very thoughtful and well written, so
please do read it.
@lisp
(service qemu-binfmt-service-type
(qemu-binfmt-configuration
- (platforms (lookup-qemu-platforms "arm" "aarch64" "mips64el"))
+ (platforms (lookup-qemu-platforms "arm" "aarch64"))
(guix-support? #t)))
@end lisp
@example
guix build --system=armhf-linux --rounds=2 hello
guix build --system=aarch64-linux --rounds=2 hello
-guix build --system=mips64el-linux --rounds=2 hello
@end example
@item
@item 300 dependent packages or less
@code{master} branch (non-disruptive changes).
-@item between 300 and 1,200 dependent packages
+@item between 300 and 1,800 dependent packages
@code{staging} branch (non-disruptive changes). This branch is intended
-to be merged in @code{master} every 3 weeks or so. Topical changes
+to be merged in @code{master} every 6 weeks or so. Topical changes
(e.g., an update of the GNOME stack) can instead go to a specific branch
(say, @code{gnome-updates}).
-@item more than 1,200 dependent packages
+@item more than 1,800 dependent packages
@code{core-updates} branch (may include major and potentially disruptive
changes). This branch is intended to be merged in @code{master} every
-2.5 months or so.
+6 months or so.
@end table
All these branches are @uref{@value{SUBSTITUTE-SERVER},
@end enumerate
When posting a patch to the mailing list, use @samp{[PATCH] @dots{}} as
-a subject. You may use your email client or the @command{git
-send-email} command (@pxref{Sending a Patch Series}). We prefer to get
-patches in plain text messages, either inline or as MIME attachments.
-You are advised to pay attention if your email client changes anything
-like line breaks or indentation which could potentially break the
-patches.
+a subject, if your patch is to be applied on a branch other than
+@code{master}, say @code{core-updates}, specify it in the subject like
+@samp{[PATCH core-updates] @dots{}}. You may use your email client or
+the @command{git send-email} command (@pxref{Sending a Patch Series}).
+We prefer to get patches in plain text messages, either inline or as
+MIME attachments. You are advised to pay attention if your email client
+changes anything like line breaks or indentation which could potentially
+break the patches.
When a bug is resolved, please close the thread by sending an email to
@email{@var{NNN}-done@@debbugs.gnu.org}.
@itemize
@item
+@url{https://issues.guix.gnu.org} provides a pleasant
+interface@footnote{The web interface at
+@url{https://issues.guix.gnu.org} is powered by Mumi, a nice piece of
+software written in Guile, and you can help! See
+@url{https://git.elephly.net/gitweb.cgi?p=software/mumi.git}.} to browse
+bug reports and patches, and to participate in discussions;
+@item
@url{https://bugs.gnu.org/guix} lists bug reports;
@item
@url{https://bugs.gnu.org/guix-patches} lists patch submissions.
@end itemize
-You can also access both of these @i{via} the (nicer)
-@url{https://issues.guix.gnu.org} interface@footnote{The web interface
-at @url{https://issues.guix.gnu.org} is powered by Mumi, a nice piece of
-software written in Guile, and you can help! See
-@url{https://git.elephly.net/gitweb.cgi?p=software/mumi.git}.}. To view
-discussions related to issue number @var{n}, go to
-@indicateurl{https://issues.guix.gnu.org/issue/@var{n}} or
+To view discussions related to issue number @var{n}, go to
+@indicateurl{https://issues.guix.gnu.org/@var{n}} or
@indicateurl{https://bugs.gnu.org/@var{n}}.
If you use Emacs, you may find it more convenient to interact with
@cindex commit access, for developers
For frequent contributors, having write access to the repository is
-convenient. When you deem it necessary, feel free to ask for it on the
-mailing list. When you get commit access, please make sure to follow
+convenient. When you deem it necessary, consider applying for commit
+access by following these steps:
+
+@enumerate
+@item
+Find three committers who would vouch for you. You can view the list of
+committers at
+@url{https://savannah.gnu.org/project/memberlist.php?group=guix}. Each
+of them should email a statement to @email{guix-maintainers@@gnu.org} (a
+private alias for the collective of maintainers), signed with their
+OpenPGP key.
+
+Committers are expected to have had some interactions with you as a
+contributor and to be able to judge whether you are sufficiently
+familiar with the project's practices. It is @emph{not} a judgment on
+the value of your work, so a refusal should rather be interpreted as
+``let's try again later''.
+
+@item
+Send @email{guix-maintainers@@gnu.org} a message stating your intent,
+listing the three committers who support your application, signed with
+the OpenPGP key you will use to sign commits, and giving its fingerprint
+(see below). See @uref{https://emailselfdefense.fsf.org/en/}, for an
+introduction to public-key cryptography with GnuPG.
+
+@c See <https://sha-mbles.github.io/>.
+Set up GnuPG such that it never uses the SHA1 hash algorithm for digital
+signatures, which is known to be unsafe since 2019, for instance by
+adding the following line to @file{~/.gnupg/gpg.conf} (@pxref{GPG
+Esoteric Options,,, gnupg, The GNU Privacy Guard Manual}):
+
+@example
+digest-algo sha512
+@end example
+
+@item
+Maintainers ultimately decide whether to grant you commit access,
+usually following your referrals' recommendation.
+
+@item
+@cindex OpenPGP, signed commits
+If and once you've been given access, please send a message to
+@email{guix-devel@@gnu.org} to say so, again signed with the OpenPGP key
+you will use to sign commits (do that before pushing your first commit).
+That way, everyone can notice and ensure you control that OpenPGP key.
+
+@quotation Important
+Before you can push for the first time, maintainers must:
+
+@enumerate
+@item
+add your OpenPGP key to the @code{keyring} branch;
+@item
+add your OpenPGP fingerprint to the @file{.guix-authorizations} file of
+the branch(es) you will commit to.
+@end enumerate
+@end quotation
+
+@item
+Make sure to read the rest of this section and... profit!
+@end enumerate
+
+@quotation Note
+Maintainers are happy to give commit access to people who have been
+contributing for some time and have a track record---don't be shy and
+don't underestimate your work!
+
+However, note that the project is working towards a more automated patch
+review and merging system, which, as a consequence, may lead us to have
+fewer people with commit access to the main repository. Stay tuned!
+@end quotation
+
+If you get commit access, please make sure to follow
the policy below (discussions of the policy can take place on
@email{guix-devel@@gnu.org}).
with @command{git am --signoff}. This improves tracking of who did
what.
+When adding channel news entries (@pxref{Channels, Writing Channel
+News}), make sure they are well-formed by running the following command
+right before pushing:
+
+@example
+make check-channel-news
+@end example
+
For anything else, please post to @email{guix-patches@@gnu.org} and
leave time for a review, without committing anything (@pxref{Submitting
Patches}). If you didn’t receive any reply after two weeks, and if
That last part is subject to being adjusted, allowing individuals to commit
directly on non-controversial changes on parts they’re familiar with.
+
+One last thing: the project keeps moving forward because committers not
+only push their own awesome changes, but also offer some of their time
+@emph{reviewing} and pushing other people's changes. As a committer,
+you're welcome to use your expertise and commit rights to help other
+contributors, too!
HCoop / jackhill / guix / guix.git / blobdiff