From: Clinton Ebadi Date: Wed, 15 Apr 2015 02:40:06 +0000 (-0400) Subject: preseed/jessie: enable irqbalance X-Git-Url: https://git.hcoop.net/hcoop/zz_old/machine-template.git/commitdiff_plain/0252354abcb74268092122d1426fbfffe54e10e3?hp=fe29b987626812fb20f7ee55ee368adadcbf0941 preseed/jessie: enable irqbalance --- diff --git a/preseed/preseed-jessie.cfg b/preseed/preseed-jessie.cfg new file mode 100644 index 0000000..74ec997 --- /dev/null +++ b/preseed/preseed-jessie.cfg @@ -0,0 +1,462 @@ +#### Contents of the preconfiguration file (for squeeze) +### Localization +# Preseeding only locale sets language, country and locale. +d-i debian-installer/locale string en_US.UTF-8 + +# The values can also be preseeded individually for greater flexibility. +#d-i debian-installer/language string en +#d-i debian-installer/country string NL +#d-i debian-installer/locale string en_GB.UTF-8 +# Optionally specify additional locales to be generated. +#d-i localechooser/supported-locales en_US.UTF-8, nl_NL.UTF-8 + +# Keyboard selection. +#d-i console-tools/archs select at +d-i console-keymaps-at/keymap select us +d-i keyboard-configuration/xkb-keymap select us +# Example for a different keyboard architecture +#d-i console-keymaps-usb/keymap select mac-usb-us + +### Network configuration +# Disable network configuration entirely. This is useful for cdrom +# installations on non-networked devices where the network questions, +# warning and long timeouts are a nuisance. +#d-i netcfg/enable boolean false + +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto + +# To pick a particular interface instead: +#d-i netcfg/choose_interface select eth1 + +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +#d-i netcfg/dhcp_timeout string 60 + +# If you prefer to configure the network manually, uncomment this line and +# the static network configuration below. +d-i netcfg/disable_dhcp boolean true + +# If you want the preconfiguration file to work on systems both with and +# without a dhcp server, uncomment these lines and the static network +# configuration below. +#d-i netcfg/dhcp_failed note +#d-i netcfg/dhcp_options select Configure network manually + +# Static network configuration. +d-i netcfg/get_nameservers string 216.187.125.130 216.187.123.131 +d-i netcfg/get_ipaddress string 69.90.123.72 +d-i netcfg/get_netmask string 255.255.255.224 +d-i netcfg/get_gateway string 69.90.123.65 +d-i netcfg/confirm_static boolean true + +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. +#d-i netcfg/get_hostname string testkvm1 +d-i netcfg/get_domain string hcoop.net + +# Disable that annoying WEP key dialog. +d-i netcfg/wireless_wep string +# The wacky dhcp hostname that some ISPs use as a password of sorts. +#d-i netcfg/dhcp_hostname string radish + +# If non-free firmware is needed for the network or other hardware, you can +# configure the installer to always try to load it, without prompting. Or +# change to false to disable asking. +#d-i hw-detect/load_firmware boolean true + +### Network console +# Use the following settings if you wish to make use of the network-console +# component for remote installation over SSH. This only makes sense if you +# intend to perform the remainder of the installation manually. +#d-i anna/choose_modules string network-console +#d-i network-console/password password r00tme +#d-i network-console/password-again password r00tme + +### Mirror settings +# If you select ftp, the mirror/country string does not need to be set. +#d-i mirror/protocol string ftp +d-i mirror/country string manual +d-i mirror/http/hostname string http.us.debian.org +d-i mirror/http/directory string /debian +d-i mirror/http/proxy string + +# Suite to install. +d-i mirror/suite string jessie +# Suite to use for loading installer components (optional). +#d-i mirror/udeb/suite string testing + +### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). +#d-i passwd/root-login boolean true +# Alternatively, to skip creation of a normal user account. +d-i passwd/make-user boolean false + +# Root password, either in clear text +#d-i passwd/root-password password f00bar +#d-i passwd/root-password-again password r00tme +# or encrypted using an MD5 hash. +#d-i passwd/root-password-crypted password [MD5 hash] + +# To create a normal user account. +#d-i passwd/user-fullname string Debian User +#d-i passwd/username string debian +# Normal user's password, either in clear text +#d-i passwd/user-password password insecure +#d-i passwd/user-password-again password insecure +# or encrypted using an MD5 hash. +#d-i passwd/user-password-crypted password [MD5 hash] +# Create the first user with the specified UID instead of the default. +#d-i passwd/user-uid string 1010 + +# The user account will be added to some standard initial groups. To +# override that, use this. +#d-i passwd/user-default-groups string audio cdrom video + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string US/Eastern + +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean true +# NTP server to use. The default is almost always fine here. +#d-i clock-setup/ntp-server string ntp.example.com + +### Partitioning +## Partitioning example +# If the system has free space you can choose to only partition that space. +# This is only honoured if partman-auto/method (below) is not set. +#d-i partman-auto/init_automatically_partition select biggest_free + +# Alternatively, you may specify a disk to partition. If the system has only +# one disk the installer will default to using that, but otherwise the device +# name must be given in traditional, non-devfs format (so e.g. /dev/hda or +# /dev/sda, and not e.g. /dev/discs/disc0/disc). +# For example, to use the first SCSI/SATA hard disk: +#d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: +# - regular: use the usual partition types for your architecture +# - lvm: use LVM to partition the disk +# - crypto: use LVM within an encrypted partition +d-i partman-auto/method string lvm + +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... +d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +d-i partman-md/device_remove_md boolean true +# And the same goes for the confirmation to write the lvm partitions. +d-i partman-lvm/confirm boolean true + +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /usr, /var, and /tmp partitions +#d-i partman-auto/choose_recipe select atomic + +# Or provide a recipe of your own... +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +# If not, you can put an entire recipe into the preconfiguration file in one +# (logical) line. This example creates a small /boot partition, suitable +# swap, and uses the rest of the space for the root partition: +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 40 50 100 ext3 \ +# $primary{ } $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ /boot } \ +# . \ +# 500 10000 1000000000 ext3 \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ / } \ +# . \ +# 64 512 300% linux-swap \ +# method{ swap } format{ } \ +# . + +d-i partman-auto/expert_recipe string \ +hcoop-default :: \ + \ +1 1 1 free \ + $iflabel{ gpt } \ + method{ biosgrub } . \ + \ +128 512 256 ext2 \ + $defaultignore{ } \ + $bootable{ } \ + method{ format } \ + format{ } \ + use_filesystem{ } \ + filesystem{ ext2 } \ + mountpoint{ /boot } . \ + \ +500 3000 90000000 $default_filesystem \ + $lvmok{ } \ + $bootable{ } \ + method{ format } \ + format{ } \ + use_filesystem{ } \ + $default_filesystem{ } \ + mountpoint{ / } . \ + \ +5500 5000 5500 ext3 \ + $lvmok{ } \ + method{ format } \ + format{ } \ + use_filesystem{ } \ + filesystem{ ext3 } \ + mountpoint{ /var/cache/openafs } . \ + \ +1024 512 1024 linux-swap \ + $lvmok{ } \ + method{ swap } \ + format{ } . \ + \ +1000 300 1500 $default_filesystem \ + $lvmok{ } \ + method{ format } \ + format{ } \ + use_filesystem{ } \ + $default_filesystem{ } \ + mountpoint{ /tmp } . + + +# The full recipe format is documented in the file partman-auto-recipe.txt +# included in the 'debian-installer' package or available from D-I source +# repository. This also documents how to specify settings such as file +# system labels, volume group names and which physical devices to include +# in a volume group. + +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +## Partitioning using RAID +# The method should be set to "raid". +#d-i partman-auto/method string raid +# Specify the disks to be partitioned. They will all get the same layout, +# so this will only work if the disks are the same size. +#d-i partman-auto/disk string /dev/sda /dev/sdb + +# Next you need to specify the physical partitions that will be used. +#d-i partman-auto/expert_recipe string \ +# multiraid :: \ +# 1000 5000 4000 raid \ +# $primary{ } method{ raid } \ +# . \ +# 64 512 300% raid \ +# method{ raid } \ +# . \ +# 500 10000 1000000000 raid \ +# method{ raid } \ +# . + +# Last you need to specify how the previously defined partitions will be +# used in the RAID setup. Remember to use the correct partition numbers +# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported; +# devices are separated using "#". +# Parameters are: +# \ +# + +#d-i partman-auto-raid/recipe string \ +# 1 2 0 ext3 / \ +# /dev/sda1#/dev/sdb1 \ +# . \ +# 1 2 0 swap - \ +# /dev/sda5#/dev/sdb5 \ +# . \ +# 0 2 0 ext3 /home \ +# /dev/sda6#/dev/sdb6 \ +# . + +# For additional information see the file partman-auto-raid-recipe.txt +# included in the 'debian-installer' package or available from D-I source +# repository. + +# This makes partman automatically partition without confirmation. +d-i partman-md/confirm boolean true +d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +## Controlling how partitions are mounted +# The default is to mount by UUID, but you can also choose "traditional" to +# use traditional device names, or "label" to try filesystem labels before +# falling back to UUIDs. +#d-i partman/mount_style select uuid + +### Base system installation +# Configure APT to not install recommended packages by default. Use of this +# option can result in an incomplete system and should only be used by very +# experienced users. +#d-i base-installer/install-recommends boolean false + +# Select the initramfs generator used to generate the initrd for 2.6 kernels. +#d-i base-installer/kernel/linux/initramfs-generators string initramfs-tools + +# The kernel image (meta) package to be installed; "none" can be used if no +# kernel is to be installed. +d-i base-installer/kernel/image string linux-image-amd64 + +### Apt setup +# You can choose to install non-free and contrib software. +#d-i apt-setup/non-free boolean true +#d-i apt-setup/contrib boolean true +# Uncomment this if you don't want to use a network mirror. +#d-i apt-setup/use_mirror boolean false +# Select which update services to use; define the mirrors to be used. +# Values shown below are the normal defaults. +d-i apt-setup/services-select multiselect security, volatile +d-i apt-setup/security_host string security.debian.org +d-i apt-setup/volatile_host string volatile.debian.org + +# Additional repositories, local[0-9] available +d-i apt-setup/local0/repository string \ + http://debian.hcoop.net/ jessie main hcoop-config +d-i apt-setup/local0/comment string HCoop native packages +# Enable deb-src lines +d-i apt-setup/local0/source boolean true +# backports +d-i apt-setup/local1/repository string \ + http://debian.hcoop.net/ jessie-backports main +d-i apt-setup/local1/comment string HCoop backport packages +# Enable deb-src lines +d-i apt-setup/local1/source boolean true +# Official backports +d-i apt-setup/local2/repository string \ + http://http.us.debian.org/debian jessie-backports main +d-i apt-setup/local2/comment string Debian backports +# Enable deb-src lines +d-i apt-setup/local2/source boolean true + + +# URL to the public key of the local repository; you must provide a key or +# apt will complain about the unauthenticated repository and so the +# sources.list line will be left commented out +#d-i apt-setup/local0/key string http://local.server/key + +# By default the installer requires that repositories be authenticated +# using a known gpg key. This setting can be used to disable that +# authentication. Warning: Insecure, not recommended. +# ul: THIS IS VERY VERY BAD AND MUST BE FIXME FIXME FIXME +d-i debian-installer/allow_unauthenticated boolean true + +### Package selection +tasksel tasksel/first multiselect SSH server, Standard system utilities +# If the desktop task is selected, install the kde and xfce desktops +# instead of the default gnome desktop. +#tasksel tasksel/desktop multiselect kde, xfce + +# Individual additional packages to install +d-i pkgsel/include string build-essential less sudo vim emacs24-nox etckeeper changetrack openssh-server debsums logcheck bzip2 rkhunter openafs-client openafs-modules-dkms ntp nscd krb5-user libpam-krb5 kstart ssmtp libpam-afs-session openafs-krb5 resolvconf ferm libnss-afs hcoop-nsswitch-config hcoop-common-config hcoop-firewall-config hcoop-krb5-config hcoop-openssh-server-config irqbalance \ + mlton-compiler mlton-tools libssl-dev libpcre3-dev # domtool deps, a metapackage would be useful here +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +d-i pkgsel/upgrade select safe-upgrade + +# Some versions of the installer can report back on what software you have +# installed, and what software you use. The default is not to report back, +# but sending reports helps the project determine what software is most +# popular and include it on CDs. +#popularity-contest popularity-contest/participate boolean false + +### Finishing up the installation +# During installations from serial console, the regular virtual consoles +# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next +# line to prevent this. +#d-i finish-install/keep-consoles boolean true + +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +# This is how to make the installer shutdown when finished, but not +# reboot into the installed system. +#d-i debian-installer/exit/halt boolean true +# This will power off the machine instead of just halting it. +#d-i debian-installer/exit/poweroff boolean true + +### Preseeding other packages +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + +libpam-runtime libpam-runtime/profiles multiselect krb5, unix, afs-session + +#debconf debconf/frontend select Dialog +debconf debconf/priority select critical + +#openafs-client openafs-client/run-client boolean true +#openafs-client openafs-client/dynroot boolean true + +openafs-client openafs-client/thiscell string hcoop.net +openafs-client openafs-client/cachesize string 5000000 +openafs-client openafs-client/fakestat boolean true + +# warning: used to shut the installer up, but we're actually shipping +# a static kerberos config! +krb5-config krb5-config/add_servers_realm string HCOOP.NET +krb5-config krb5-config/default_realm string HCOOP.NET +# krb5 1.10 still does not support distributing the admin server +# location via DNS. Remove when it does. +krb5-config krb5-config/admin_server string kerberos-adm.hcoop.net + +ssmtp ssmtp/root string logs +ssmtp ssmtp/rewritedomain string hcoop.net +ssmtp ssmtp/mailhub string mail +ssmtp ssmtp/fromoverride boolean true + +rkhunter rkhunter/cron_daily_run boolean true +rkhunter rkhunter/cron_db_update boolean true + +irqbalance irqbalance/oneshot boolean false +irqbalance irqbalance/enable boolean true +#### Advanced options +### Running custom commands during the installation +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preconfiguration file like this one. Only use preconfiguration files from +# trusted locations! To drive that home, and because it's generally useful, +# here's a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +#d-i preseed/early_command string anna-install some-udeb +# This command is run immediately before the partitioner starts. It may be +# useful to apply dynamic partitioner preseeding that depends on the state +# of the disks (which may not be visible when preseed/early_command runs). +#d-i partman/early_command \ +# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. +#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh +