Debconf settings and unmodified preseed files

* Dumped preseed info from a test kvm that was installed to the point
  where it could kinit && aklog and route email through mail.hcoop.net

diff --git a/preseed/example-preseed.txt b/preseed/example-preseed.txt
new file mode 100644 (file)
index 0000000..3bed968
--- /dev/null
+++ b/preseed/example-preseed.txt
@@ -0,0 +1,370 @@
+#### Contents of the preconfiguration file (for squeeze)
+### Localization
+# Preseeding only locale sets language, country and locale.
+d-i debian-installer/locale string en_US
+
+# The values can also be preseeded individually for greater flexibility.
+#d-i debian-installer/language string en
+#d-i debian-installer/country string NL
+#d-i debian-installer/locale string en_GB.UTF-8
+# Optionally specify additional locales to be generated.
+#d-i localechooser/supported-locales en_US.UTF-8, nl_NL.UTF-8
+
+# Keyboard selection.
+#d-i console-tools/archs select at
+d-i console-keymaps-at/keymap select us
+d-i keyboard-configuration/xkb-keymap select us
+# Example for a different keyboard architecture
+#d-i console-keymaps-usb/keymap select mac-usb-us
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string unassigned-hostname
+d-i netcfg/get_domain string unassigned-domain
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string http.us.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+#d-i passwd/root-password password r00tme
+#d-i passwd/root-password-again password r00tme
+# or encrypted using an MD5 hash.
+#d-i passwd/root-password-crypted password [MD5 hash]
+
+# To create a normal user account.
+#d-i passwd/user-fullname string Debian User
+#d-i passwd/username string debian
+# Normal user's password, either in clear text
+#d-i passwd/user-password password insecure
+#d-i passwd/user-password-again password insecure
+# or encrypted using an MD5 hash.
+#d-i passwd/user-password-crypted password [MD5 hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Eastern
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
+# /dev/sda, and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+#d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /usr, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string                         \
+#      boot-root ::                                            \
+#              40 50 100 ext3                                  \
+#                      $primary{ } $bootable{ }                \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ /boot }                     \
+#              .                                               \
+#              500 10000 1000000000 ext3                       \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ / }                         \
+#              .                                               \
+#              64 512 300% linux-swap                          \
+#                      method{ swap } format{ }                \
+#              .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used. 
+#d-i partman-auto/expert_recipe string \
+#      multiraid ::                                         \
+#              1000 5000 4000 raid                          \
+#                      $primary{ } method{ raid }           \
+#              .                                            \
+#              64 512 300% raid                             \
+#                      method{ raid }                       \
+#              .                                            \
+#              500 10000 1000000000 raid                    \
+#                      method{ raid }                       \
+#              .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+#          <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+#    1 2 0 ext3 /                    \
+#          /dev/sda1#/dev/sdb1       \
+#    .                               \
+#    1 2 0 swap -                    \
+#          /dev/sda5#/dev/sdb5       \
+#    .                               \
+#    0 2 0 ext3 /home                \
+#          /dev/sda6#/dev/sdb6       \
+#    .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+#d-i base-installer/install-recommends boolean false
+
+# Select the initramfs generator used to generate the initrd for 2.6 kernels.
+#d-i base-installer/kernel/linux/initramfs-generators string initramfs-tools
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-2.6-486
+
+### Apt setup
+# You can choose to install non-free and contrib software.
+#d-i apt-setup/non-free boolean true
+#d-i apt-setup/contrib boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security, volatile
+#d-i apt-setup/security_host string security.debian.org
+#d-i apt-setup/volatile_host string volatile.debian.org
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+#       http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string http://local.server/key
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server
+# If the desktop task is selected, install the kde and xfce desktops
+# instead of the default gnome desktop.
+#tasksel tasksel/desktop multiselect kde, xfce
+
+# Individual additional packages to install
+#d-i pkgsel/include string openssh-server build-essential
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+#d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+#   debconf-get-selections --installer > file
+#   debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+

diff --git a/preseed/preseed-test-0.cfg b/preseed/preseed-test-0.cfg
new file mode 100644 (file)
index 0000000..3bed968
--- /dev/null
+++ b/preseed/preseed-test-0.cfg
@@ -0,0 +1,370 @@
+#### Contents of the preconfiguration file (for squeeze)
+### Localization
+# Preseeding only locale sets language, country and locale.
+d-i debian-installer/locale string en_US
+
+# The values can also be preseeded individually for greater flexibility.
+#d-i debian-installer/language string en
+#d-i debian-installer/country string NL
+#d-i debian-installer/locale string en_GB.UTF-8
+# Optionally specify additional locales to be generated.
+#d-i localechooser/supported-locales en_US.UTF-8, nl_NL.UTF-8
+
+# Keyboard selection.
+#d-i console-tools/archs select at
+d-i console-keymaps-at/keymap select us
+d-i keyboard-configuration/xkb-keymap select us
+# Example for a different keyboard architecture
+#d-i console-keymaps-usb/keymap select mac-usb-us
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string unassigned-hostname
+d-i netcfg/get_domain string unassigned-domain
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string http.us.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+#d-i passwd/root-password password r00tme
+#d-i passwd/root-password-again password r00tme
+# or encrypted using an MD5 hash.
+#d-i passwd/root-password-crypted password [MD5 hash]
+
+# To create a normal user account.
+#d-i passwd/user-fullname string Debian User
+#d-i passwd/username string debian
+# Normal user's password, either in clear text
+#d-i passwd/user-password password insecure
+#d-i passwd/user-password-again password insecure
+# or encrypted using an MD5 hash.
+#d-i passwd/user-password-crypted password [MD5 hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Eastern
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
+# /dev/sda, and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+#d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /usr, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string                         \
+#      boot-root ::                                            \
+#              40 50 100 ext3                                  \
+#                      $primary{ } $bootable{ }                \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ /boot }                     \
+#              .                                               \
+#              500 10000 1000000000 ext3                       \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ / }                         \
+#              .                                               \
+#              64 512 300% linux-swap                          \
+#                      method{ swap } format{ }                \
+#              .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used. 
+#d-i partman-auto/expert_recipe string \
+#      multiraid ::                                         \
+#              1000 5000 4000 raid                          \
+#                      $primary{ } method{ raid }           \
+#              .                                            \
+#              64 512 300% raid                             \
+#                      method{ raid }                       \
+#              .                                            \
+#              500 10000 1000000000 raid                    \
+#                      method{ raid }                       \
+#              .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+#          <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+#    1 2 0 ext3 /                    \
+#          /dev/sda1#/dev/sdb1       \
+#    .                               \
+#    1 2 0 swap -                    \
+#          /dev/sda5#/dev/sdb5       \
+#    .                               \
+#    0 2 0 ext3 /home                \
+#          /dev/sda6#/dev/sdb6       \
+#    .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+#d-i base-installer/install-recommends boolean false
+
+# Select the initramfs generator used to generate the initrd for 2.6 kernels.
+#d-i base-installer/kernel/linux/initramfs-generators string initramfs-tools
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-2.6-486
+
+### Apt setup
+# You can choose to install non-free and contrib software.
+#d-i apt-setup/non-free boolean true
+#d-i apt-setup/contrib boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security, volatile
+#d-i apt-setup/security_host string security.debian.org
+#d-i apt-setup/volatile_host string volatile.debian.org
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+#       http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string http://local.server/key
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server
+# If the desktop task is selected, install the kde and xfce desktops
+# instead of the default gnome desktop.
+#tasksel tasksel/desktop multiselect kde, xfce
+
+# Individual additional packages to install
+#d-i pkgsel/include string openssh-server build-essential
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+#d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+#   debconf-get-selections --installer > file
+#   debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+

diff --git a/preseed/testkvm0-debconf-installer b/preseed/testkvm0-debconf-installer
new file mode 100644 (file)
index 0000000..8804460
--- /dev/null
+++ b/preseed/testkvm0-debconf-installer
@@ -0,0 +1,1066 @@
+# Services to use:
+# Choices: security updates (from security.debian.org), volatile updates (from volatile.debian.org)
+apt-setup-udeb apt-setup/services-select       multiselect     security, volatile
+# Non-existing physical volume
+partman-auto-lvm       partman-auto-lvm/no_such_pv     error   
+# Install GRUB?
+grub-installer grub-installer/grub_not_mature_on_this_platform boolean false
+# Active devices for the RAID array:
+# Choices: 
+partman-md     partman-md/raiddevs     multiselect     
+# Web server started, but network not running
+d-i    save-logs/no_network    note    
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/error/invalidrel     error   
+# for internal use only
+d-i    debian-installer/consoledisplay string  console-setup
+# Unable to configure GRUB
+grub-installer grub-installer/sataraid-error   error   
+# Driver needed for your disk drive:
+# Choices: continue with no disk drive, , none of the above
+disk-detect    disk-detect/module_select       select  continue with no disk drive
+# 
+d-i    debian-installer/shell-plugin   terminal        
+# for internal use; can be preseeded
+disk-detect    disk-detect/multipath/enable    boolean false
+# Allow login as root?
+user-setup-udeb        passwd/root-login       boolean true
+# Country, territory or area:
+# Choices: Antigua and Barbuda, Australia, Botswana, Canada, Hong Kong, India, Ireland, New Zealand, Nigeria, Philippines, Singapore, South Africa, United Kingdom, United States, Zimbabwe, other
+d-i    localechooser/shortlist select  US
+# Identical mount points for two file systems
+partman-target partman-target/same_mountpoint  error   
+# Do you intend to use FireWire Ethernet?
+d-i    ethdetect/use_firewire_ethernet boolean false
+# Auto-configure network with DHCP?
+d-i    netcfg/use_dhcp boolean true
+# Go back to the menu and correct errors?
+partman-basicfilesystems       partman-basicfilesystems/check_failed   boolean 
+# Partitioning scheme:
+# Choices: All files in one partition (recommended for new users), Separate /home partition, Separate /home\, /usr\, /var\, and /tmp partitions
+partman-auto   partman-auto/choose_recipe      select  /lib/partman/recipes/80multi
+# Type of encryption key for this partition:
+# Choices: 
+partman-crypto partman-crypto/keytype  select  
+# The size entered is invalid
+partman-partitioning   partman-partitioning/bad_new_size       error   
+# Volume group to reduce:
+# Choices: 
+partman-lvm    partman-lvm/vgreduce_names      select  
+# Devices for the new volume group:
+# Choices: 
+partman-lvm    partman-lvm/vgcreate_parts      multiselect     
+# Cannot install base system
+bootstrap-base base-installer/cannot_install   error   
+# Failed to partition the selected disk
+partman-auto   partman-auto/autopartitioning_failed    error   
+# Write previous changes to disk and continue?
+partman-partitioning   partman-partitioning/confirm_copy       boolean 
+# Unexpected error while creating volume group
+partman-auto-lvm       partman-auto-lvm/vg_create_error        error   
+# Hostname:
+d-i    netcfg/get_hostname     string  testkvm0
+# for internal use; can be preseeded
+d-i    preseed/include_command string  
+# location
+# Choices: Lisbon, Madeira Islands, Azores
+tzsetup-udeb   tzsetup/country/PT      select  
+# Error while deleting volume group
+partman-lvm    partman-lvm/vgdelete_error      error   
+# Proceed to install crypto components despite insufficient memory?
+partman-crypto partman-crypto/install_udebs_low_mem    boolean 
+# Unusable free space
+partman-auto   partman-auto/unusable_space     error   
+# Is this information correct?
+d-i    netcfg/confirm_static   boolean true
+# 
+# Choices: Canada, Mexico, Saint Pierre and Miquelon, United States
+d-i    localechooser/countrylist/North_America select  
+# 
+# Choices: Greece, Cyprus, other
+d-i    localechooser/shortlist/el      select  
+# Is the system clock set to UTC?
+clock-setup    clock-setup/utc boolean true
+# Initialization vector generation algorithm for this partition:
+# Choices: 
+partman-crypto partman-crypto/ivalgorithm      select  
+# For internal use (Is a serial console in use?)
+d-i    debian-installer/serial-console boolean false
+# 
+# Choices: Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Congo, Congo\, The Democratic Republic of the, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Malawi, Mali, Mauritania, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Sierra Leone, Somalia, South Africa, Sudan, Swaziland, Tanzania\, United Republic of, Togo, Tunisia, Uganda, Western Sahara, Zambia, Zimbabwe
+d-i    localechooser/countrylist/Africa        select  
+# Keymap to use:
+# Choices: American English, Belarusian, Belgian, Brazilian (ABNT2 layout), Brazilian (EUA layout), British English, Bulgarian, Canadian French, Canadian Multilingual, Croatian, Czech, Danish, Dutch, Dvorak, Estonian, Finnish, French, German, Greek, Hebrew, Hungarian, Icelandic, Italian, Japanese, Kirghiz, Latin American, Latvian, Lithuanian, Macedonian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian (Cyrillic), Slovakian, Slovene, Spanish, Swedish, Swiss French, Swiss German, Thai, Turkish (F layout), Turkish (Q layout), Ukrainian
+d-i    console-keymaps-at/keymap       select  us
+# Passphrase input error
+partman-crypto partman-crypto/passphrase-mismatch      error   
+# Continue with partitioning?
+partman-partitioning   partman-partitioning/unknown_label      boolean true
+# Username for your account:
+user-setup-udeb        passwd/username string  root0
+# Required encryption options missing
+partman-crypto partman-crypto/options_missing  error   
+# Error while creating a new logical volume
+partman-lvm    partman-lvm/lvcreate_error      error   
+# Participate in the package usage survey?
+d-i    popularity-contest/participate  boolean false
+# Return to the menu to set the bootable flag?
+partman-ext3   partman-ext3/boot_not_bootable  boolean 
+# 
+# Choices: Finland, Sweden, other
+d-i    localechooser/shortlist/sv      select  
+# Resize operation failure
+partman-partitioning   partman-partitioning/new_size_commit_failed     error   
+# 
+# Choices: Cyprus, Turkey, other
+d-i    localechooser/shortlist/tr      select  
+# Interactive shell
+d-i    di-utils-shell/do-shell note    
+# for internal use; can be preseeded
+disk-detect    disk-detect/dmraid/enable       boolean false
+# 
+# Choices: 
+partman-base   partman/exception_handler       select  
+# Do you want to resume partitioning?
+partman-target partman-target/mount_failed     boolean true
+# for internal use; can be preseeded
+partman-auto   partman-auto/expert_recipe      string  
+# How to use this partition:
+# Choices: Ext3 journaling file system, Ext4 journaling file system, Ext2 file system, btrfs journaling file system, JFS journaling file system, XFS journaling file system, FAT16 file system, FAT32 file system, swap area, physical volume for encryption, physical volume for RAID, physical volume for LVM, do not use the partition
+partman-target partman-target/choose_method    select  40swap__________swap
+# Debian archive mirror directory:
+d-i    mirror/http/directory   string  /debian/
+# Kernel to install:
+# Choices: linux-image-2.6-amd64,linux-image-2.6-openvz-amd64,linux-image-2.6-vserver-amd64,linux-image-2.6-xen-amd64,linux-image-2.6.32-5-amd64,linux-image-2.6.32-5-amd64-dbg,linux-image-2.6.32-5-openvz-amd64,linux-image-2.6.32-5-openvz-amd64-dbg,linux-image-2.6.32-5-vserver-amd64,linux-image-2.6.32-5-vserver-amd64-dbg,linux-image-2.6.32-5-xen-amd64,linux-image-2.6.32-5-xen-amd64-dbg,linux-image-amd64,linux-image-openvz-amd64,linux-image-vserver-amd64,linux-image-xen-amd64, none
+bootstrap-base base-installer/kernel/image     select  linux-image-2.6-amd64
+# Driver needed by your Ethernet card:
+# Choices: no ethernet card, , none of the above
+d-i    ethdetect/module_select select  no ethernet card
+# Unable to automatically remove LVM data
+partman-lvm    partman-lvm/device_remove_lvm_span      error   
+# For internal use (Is a User Mode Linux console in use?)
+d-i    debian-installer/uml-console    boolean false
+# Encryption configuration failure
+partman-crypto partman-crypto/crypto_root_needs_boot   error   
+# Volume group:
+# Choices: 
+partman-lvm    partman-lvm/lvcreate_vgnames    select  
+# city
+# Choices: Jakarta, Pontianak, Makassar, Jayapura
+tzsetup-udeb   tzsetup/country/ID      select  
+# Erasing data on  failed
+partman-crypto partman-crypto/erase_failed     error   
+# Go back to the menu and resume partitioning?
+partman-efi    partman-efi/no_efi      boolean 
+# Number of active devices for the RAID array:
+partman-md     partman-md/raiddevcount string  
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/error/unknownrelsig  error   
+# Choose an installation step:
+# Choices: 
+d-i    debian-installer/missing-provide        select  ${DEFAULT}
+# Debian archive mirror country:
+# Choices: enter information manually, Argentina, Australia, Austria, Bangladesh, Belarus, Belgium, Bosnia and Herzegovina, Brazil, Bulgaria, Canada, Chile, China, Colombia, Costa Rica, Croatia, Czech Republic, Denmark, El Salvador, Estonia, Finland, France, French Polynesia, Germany, Greece, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Japan, Kazakhstan, Korea\, Republic of, Latvia, Lithuania, Luxembourg, Malta, Mexico, Moldova, Netherlands, New Caledonia, New Zealand, Nicaragua, Norway, Poland, Portugal, Romania, Russian Federation, Singapore, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, Ukraine, United Kingdom, United States, Uzbekistan, Venezuela
+d-i    mirror/http/countries   select  US
+# for internal use only
+user-setup-udeb        passwd/user-default-groups      string  audio cdrom dip floppy video plugdev netdev powerdev scanner bluetooth
+# location
+# Choices: Guayaquil, Galapagos
+tzsetup-udeb   tzsetup/country/EC      select  
+# Not installing to unclean target
+base-installer base-installer/unclean_target_cancel    error   
+# btrfs file system not supported for /boot
+partman-btrfs  partman-btrfs/btrfs_boot        error   
+# No partitions to encrypt
+partman-crypto partman-crypto/nothing_to_setup note    
+# New partition size:
+partman-partitioning   partman-partitioning/new_partition_size string  24.1 GB
+# Failed to retrieve the preconfiguration file
+d-i    preseed/retrieve_error  error   
+# Directory in which to save debug logs:
+d-i    save-logs/directory     string  /mnt
+# Network autoconfiguration failed
+d-i    netcfg/dhcp_failed      note    
+# for internal use only
+d-i    debconf/showold boolean false
+# Type of keyboard:
+# Choices: PC-style (AT or PS-2 connector) keyboard, Do not configure keyboard; keep kernel keymap
+d-i    console-tools/archs     select  at
+# FTP proxy information (blank for none):
+d-i    mirror/ftp/proxy        string  
+# Really delete this software RAID device?
+partman-md     partman-md/deleteverify boolean false
+# for internal use only
+clock-setup    clock-setup/system-time-changed boolean true
+# for internal use; can be preseeded
+bootstrap-base base-installer/kernel/linux/initramfs-generators        string  initramfs-tools yaird
+# New partition size:
+partman-partitioning   partman-partitioning/new_size   string  some number
+# 
+# Choices: Andorra, Spain, France, Italy, other
+d-i    localechooser/shortlist/ca      select  
+# Write the changes to the storage devices and configure RAID?
+d-i    partman-md/confirm_nooverwrite  boolean false
+# Wireless ESSID for :
+d-i    netcfg/wireless_essid   string  
+# Logical volume:
+# Choices: 
+partman-lvm    partman-lvm/lvdelete_lvnames    select  
+# Unable to install the selected kernel
+bootstrap-base base-installer/kernel/failed-install    error   
+# Unable to configure GRUB
+grub-installer grub-installer/update-grub-failed       error   
+# PCMCIA resource range options:
+d-i    hw-detect/pcmcia_resources      string  
+# for internal use; can be preseeded
+# Choices: none, safe-upgrade, full-upgrade
+pkgsel pkgsel/upgrade  select  safe-upgrade
+# Go back to the menu and correct this problem?
+partman-ufs    partman-ufs/root_not_ufs        boolean 
+# Unreachable gateway
+d-i    netcfg/gateway_unreachable      error   
+# for internal use; can be preseeded
+grub-installer grub-installer/skip     boolean false
+# for internal use; can be preseeded
+bootstrap-base base-installer/kernel/linux/extra-packages      string  
+# No RAID partitions available
+partman-md     partman-md/noparts      error   
+# Active devices for the RAID0 array:
+# Choices: 
+partman-md     partman-md/raid0devs    multiselect     
+# Volume group to extend:
+# Choices: 
+partman-lvm    partman-lvm/vgextend_names      select  
+# Setting firmware variables for automatic boot
+nobootloader   nobootloader/confirmation_powerpc_chrp_pegasos  note    
+# Failed to mount the floppy
+d-i    save-logs/floppy_mount_failed   error   
+# Go back and try a different mirror?
+d-i    mirror/no-default       boolean true
+# for internal use; can be preseeded
+apt-setup-udeb apt-setup/volatile_host string  volatile.debian.org
+# for internal use only
+d-i    debconf/language        string  en
+# NTP server to use:
+clock-setup    clock-setup/ntp-server  string  0.debian.pool.ntp.org
+# No physical volume defined in volume group
+partman-auto-lvm       partman-auto-lvm/no_pv_in_vg    error   
+# 
+# Choices: China, Singapore, Taiwan, Hong Kong, other
+d-i    localechooser/shortlist/zh_TW   select  
+# Name server addresses:
+d-i    netcfg/get_nameservers  string  216.187.125.130 216.187.123.131
+# Dummy template for preseeding unavailable questions
+d-i    debian-installer/dummy  string  
+# Additional parameters for module :
+d-i    hw-detect/retry_params  string  
+# Go back to the menu and correct this problem?
+partman-ext3   partman-ext3/boot_not_ext2_or_ext3      boolean 
+# Encryption configuration failure
+partman-crypto partman-crypto/crypto_boot_not_possible error   
+# Primary network interface:
+# Choices: 
+d-i    netcfg/choose_interface select  
+# Failed to download crypto components
+partman-crypto partman-crypto/install_udebs_failure    error   
+# for internal use only
+user-setup-udeb        passwd/user-uid string  
+# 
+# Choices: Argentina, Bolivia, Chile, Colombia, Costa Rica, Ecuador, El Salvador, Spain, United States, Guatemala, Honduras, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Dominican Republic, Uruguay, Venezuela, other
+d-i    localechooser/shortlist/es      select  
+# RAID configuration failure
+partman-md     partman-md/commit_failed        error   
+# for internal use; can be preseeded
+d-i    preseed/run     string  
+# Write the changes to disks and configure LVM?
+d-i    partman-lvm/confirm_nooverwrite boolean false
+# Cannot save logs
+d-i    save-logs/bad_directory error   
+# 
+# Choices: Belgium, Canada, France, Luxembourg, Switzerland, other
+d-i    localechooser/shortlist/fr      select  
+# Encryption configuration actions
+# Choices: Create encrypted volumes, Finish
+partman-crypto partman-crypto/mainmenu select  
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/fallback-error       error   
+# for internal use; can be preseeded
+apt-setup-udeb apt-setup/security_host string  security.debian.org
+# Insufficient memory
+d-i    lowmem/insufficient     error   
+# Device in use
+partman-base   partman-base/devicelocked       error   
+# No physical volumes selected
+partman-lvm    partman-lvm/vgreduce_nosel      error   
+# Failed to mount /target/proc
+nobootloader   nobootloader/mounterr   error   
+# Select disk to partition:
+# Choices: SCSI1 (0\,0\,0) (sda) - 32.2 GB ATA QEMU HARDDISK
+partman-auto   partman-auto/select_disk        select  /var/lib/partman/devices/=dev=sda
+# for internal use; can be preseeded
+d-i    netcfg/enable   boolean true
+# Debian version to install:
+# Choices: squeeze${!TAB}-${!TAB}stable, wheezy${!TAB}-${!TAB}testing, sid${!TAB}-${!TAB}unstable
+d-i    mirror/suite    select  stable
+# 
+# Choices: China, Taiwan, Singapore, Hong Kong, other
+d-i    localechooser/shortlist/zh_CN   select  
+# zone
+# Choices: Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Arizona, East Indiana, Samoa
+tzsetup-udeb   tzsetup/country/US      select  US/Eastern
+# Load missing firmware from removable media?
+d-i    hw-detect/load_firmware boolean true
+# 
+# Choices: Italy, Switzerland, other
+d-i    localechooser/shortlist/it      select  
+# No volume group found
+partman-lvm    partman-lvm/vgdelete_novg       error   
+# Drivers to include in the initrd:
+# Choices: generic: include all available drivers, targeted: only include drivers needed for this system
+bootstrap-base base-installer/initramfs-tools/driver-policy    select  most
+# 
+# Choices: Antarctica
+d-i    localechooser/countrylist/Antarctica    select  
+# Network configuration method:
+# Choices: Retry network autoconfiguration, Retry network autoconfiguration with a DHCP hostname, Configure network manually, , Do not configure the network at this time
+d-i    netcfg/dhcp_options     select  Configure network manually
+# Choose the next step in the install process:
+# Choices: Choose language, Select a keyboard layout, Detect network hardware, Configure the network, Choose a mirror of the Debian archive, Download installer components, Set up users and passwords, Configure the clock, Detect disks, Partition disks, Install the base system, Configure the package manager, Select and install software, Install the GRUB boot loader on a hard disk, Install the LILO boot loader on a hard disk, Continue without boot loader, Finish the installation, Change debconf priority, Save debug logs, Execute a shell, Abort the installation
+d-i    debian-installer/main-menu      select  Finish the installation
+# How to use this free space:
+# Choices: Create a new partition, Automatically partition the free space, Show Cylinder/Head/Sector information
+partman-base   partman/free_space      select  50new__________new
+# Debian archive mirror hostname:
+d-i    mirror/ftp/hostname     string  mirror
+# Error while reducing volume group
+partman-lvm    partman-lvm/vgreduce_error      error   
+# for internal use; can be preseeded
+partman-auto   partman-auto/expert_recipe_file string  
+# Failed to load installer component
+d-i    anna/install_failed     error   
+# 
+# Choices: Russian Federation, Ukraine, other
+d-i    localechooser/shortlist/ru      select  
+# Entering low memory mode
+d-i    lowmem/low      note    
+# city
+# Choices: Lord Howe Island, Hobart, Melbourne, Sydney, Broken Hill, Brisbane, Lindeman, Adelaide, Darwin, Perth, Canberra, Eucla, Currie, Yancowinna
+tzsetup-udeb   tzsetup/country/AU      select  Australia/Sydney
+# 
+# Choices: Jordan, United Arab Emirates, Bahrain, Algeria, Syrian Arab Republic, Saudi Arabia, Sudan, Iraq, Kuwait, Morocco, India, Yemen, Tunisia, Oman, Qatar, Lebanon, Libya, Egypt, other
+d-i    localechooser/shortlist/ar      select  
+# for internal use; can be preseeded
+partman-auto   partman-auto/disk       string  
+# city
+# Choices: Almaty, Qyzylorda, Aqtobe, Atyrau, Oral
+tzsetup-udeb   tzsetup/country/KZ      select  
+# Not enough RAID partitions specified
+partman-auto-raid      partman-auto-raid/notenoughparts        error   
+# 
+# Choices: Antigua and Barbuda, Australia, Botswana, Canada, Hong Kong, India, Ireland, New Zealand, Nigeria, Philippines, Singapore, South Africa, United Kingdom, United States, Zimbabwe, other
+d-i    localechooser/shortlist/en      select  
+# Remove existing logical volume data?
+partman-lvm    partman-lvm/device_remove_lvm   boolean false
+# for internal use only
+d-i    anna/retriever  string  net-retriever
+# for internal use; can be preseeded
+d-i    netcfg/dhcp_timeout     string  15
+# Mount point for this partition:
+partman-basicfilesystems       partman-basicfilesystems/mountpoint_manual      string  /var/cache/openafs
+# for internal use; can be preseeded
+bootstrap-base base-installer/debootstrap_script       string  
+# The size entered is too large
+partman-partitioning   partman-partitioning/big_new_size       error   
+# Enable shadow passwords?
+user-setup-udeb        passwd/shadow   boolean true
+# Point-to-point address:
+d-i    netcfg/get_pointopoint  string  
+# 
+# Choices: Albania, Andorra, Armenia, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Faroe Islands, Finland, France, Georgia, Germany, Gibraltar, Greece, Greenland, Guernsey, Holy See (Vatican City State), Hungary, Iceland, Ireland, Isle of Man, Italy, Jersey, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia\, Republic of, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russian Federation, San Marino, Serbia, Slovakia, Slovenia, Spain, Svalbard and Jan Mayen, Sweden, Switzerland, Ukraine, United Kingdom
+d-i    localechooser/countrylist/Europe        select  
+# Keep current partition layout and configure LVM?
+partman-lvm    partman-lvm/confirm_nochanges   boolean false
+# HTTP proxy information (blank for none):
+d-i    mirror/http/proxy       string  
+# locale
+d-i    localechooser/help/locale       note    
+# Use contrib software?
+apt-mirror-setup       apt-setup/contrib       boolean false
+# for internal use; can be preseeded
+d-i    debian-installer/framebuffer    boolean true
+# No network interfaces detected
+d-i    netcfg/no_interfaces    error   
+# Location for the new partition:
+# Choices: Beginning, End
+partman-partitioning   partman-partitioning/new_partition_place        select  End
+# for internal use; can be preseeded
+d-i    preseed/include string  
+# for internal use
+bootstrap-base base-installer/kernel/linux/initramfs-tools/driver-policy       string  most
+# Ignore questions with a priority less than:
+# Choices: critical, high, medium, low
+d-i    debconf/priority        select  high
+# for internal use; can be preseeded
+finish-install finish-install/keep-consoles    boolean false
+# Continue without installing a kernel?
+bootstrap-base base-installer/kernel/skip-install      boolean false
+# No volume group found
+partman-lvm    partman-lvm/vgreduce_novg       error   
+# Invalid file system for this mount point
+partman-basicfilesystems       partman-basicfilesystems/posix_filesystem_required      error   
+# The encryption key for  is now being created.
+partman-crypto partman-crypto/entropy  entropy 
+# Install the GRUB boot loader to the multipath device?
+grub-installer grub-installer/multipath        boolean true
+# 
+# Choices: Bouvet Island, Falkland Islands (Malvinas), Saint Helena\, Ascension and Tristan da Cunha, South Georgia and the South Sandwich Islands
+d-i    localechooser/countrylist/Atlantic_Ocean        select  
+# Continue the install without loading kernel modules?
+d-i    anna/no_kernel_modules  boolean false
+# Install the GRUB boot loader to the Serial ATA RAID disk?
+grub-installer grub-installer/sataraid boolean true
+# Volume group name overlaps with device name
+partman-lvm    partman-lvm/vgcreate_devnameused        error   
+# Percentage of the file system blocks reserved for the super-user:
+partman-basicfilesystems       partman-basicfilesystems/specify_reserved       string  
+# Debian archive mirror hostname:
+d-i    mirror/http/hostname    string  ftp.us.debian.org
+# for internal use; can be preseeded
+d-i    debian-installer/exit/poweroff  boolean false
+# Volume group name:
+partman-lvm    partman-lvm/vgcreate_name       string  
+# 
+# Choices: Bangladesh, India, other
+d-i    localechooser/shortlist/bn      select  
+# for internal use; can be preseeded
+bootstrap-base base-installer/kernel/linux/extra-packages-2.6  string  
+# for internal use; can be preseeded
+d-i    preseed/include/checksum        string  
+# LILO installation failed
+lilo-installer lilo-installer/failed   error   
+# Name of the volume group for the new system:
+partman-auto-lvm       partman-auto-lvm/new_vg_name_exists     string  
+# Debootstrap Error
+bootstrap-base base-installer/no_codename      error   
+# for internal use; can be preseeded
+grub-installer grub-installer/grub2_instead_of_grub_legacy     boolean true
+# Invalid username
+user-setup-udeb        passwd/username-bad     error   
+# LILO installation target:
+# Choices: : software RAID array, Other choice (Advanced)
+lilo-installer lilo-installer/bootdev_raid     select  
+# Load missing drivers from removable media?
+d-i    hw-detect/load_media    boolean false
+# No physical volumes selected
+partman-lvm    partman-lvm/vgcreate_nosel      error   
+# Invalid WEP key
+d-i    netcfg/invalid_wep      error   
+# for internal use; can be preseeded
+d-i    auto-install/defaultroot        string  d-i/squeeze/./preseed.cfg
+# for internal use; can be preseeded
+bootstrap-base base-installer/excludes string  
+# Continue without a network mirror?
+apt-mirror-setup       apt-setup/no_mirror     boolean false
+# Kill switch enabled on 
+d-i    netcfg/kill_switch_enabled      note    
+# Failed to partition the selected disk
+partman-auto-lvm       partman-auto-lvm/unusable_recipe        error   
+# Start PC card services?
+d-i    hw-detect/start_pcmcia  boolean true
+# Error while reducing volume group
+partman-lvm    partman-lvm/vgcreate_error      error   
+# No software RAID devices available
+partman-md     partman-md/delete_no_md error   
+# Empty password
+user-setup-udeb        user-setup/password-empty       error   
+# Go back to the menu and correct this problem?
+partman-ext3   partman/boot_not_first_partition        boolean 
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/error/couldntdl      error   
+# zone
+# Choices: Central, Mountain, Pacific
+tzsetup-udeb   tzsetup/country/MX      select  
+# LVM configuration failure
+partman-lvm    partman-lvm/commit_failed       error   
+# Full name for the new user:
+user-setup-udeb        passwd/user-fullname    string  Fake User
+# Error while setting up RAID
+partman-auto-raid      partman-auto-raid/error error   
+# for internal use; can be preseeded
+d-i    debian-installer/add-kernel-opts        string  
+# DHCP hostname:
+d-i    netcfg/dhcp_hostname    string  
+# The size entered is too small
+partman-partitioning   partman-partitioning/small_new_size     error   
+# for internal use; can be preseeded
+partman-auto   partman-auto/method     string  
+# Do you want to return to the partitioning menu?
+partman-basicfilesystems       partman-basicfilesystems/no_mount_point boolean 
+# Devices to remove from the volume group:
+# Choices: 
+partman-lvm    partman-lvm/vgreduce_parts      multiselect     
+# Typical usage of this partition:
+# Choices: 
+partman-basicfilesystems       partman-basicfilesystems/specify_usage  select  
+# No root file system
+partman-target partman-target/no_root  error   
+# city
+# Choices: Noronha, Belem, Fortaleza, Recife, Araguaina, Maceio, Bahia, Sao Paulo, Campo Grande, Cuiaba, Santarem, Porto Velho, Boa Vista, Manaus, Eirunepe, Rio Branco
+tzsetup-udeb   tzsetup/country/BR      select  America/Sao_Paulo
+# Type for the new partition:
+# Choices: Primary, Logical
+partman-partitioning   partman-partitioning/new_partition_type select  Logical
+# Error
+d-i    netcfg/error    error   
+# Architecture not supported
+d-i    mirror/noarch   error   
+# This is an overview of your currently configured partitions and mount points. Select a partition to modify its settings (file system, mount point, etc.), a free space to create partitions, or a device to initialize its partition table.
+# Choices: Guided partitioning, Configure software RAID, Configure the Logical Volume Manager, Configure encrypted volumes, , SCSI1 (0\,0\,0) (sda) - 32.2 GB ATA QEMU HARDDISK,    ${!TAB}${!ALIGN=RIGHT}#7${!TAB}logical${!TAB}${!ALIGN=RIGHT}24.1 GB${!TAB}${!TAB}f${!TAB}ext3${!TAB}${!TAB}/${!TAB},    ${!TAB}${!ALIGN=RIGHT}#6${!TAB}logical${!TAB}${!ALIGN=RIGHT}1.0 GB${!TAB}${!TAB}f${!TAB}ext3${!TAB}${!TAB}/tmp${!TAB},    ${!TAB}${!ALIGN=RIGHT}#5${!TAB}logical${!TAB}${!ALIGN=RIGHT}2.1 GB${!TAB}${!TAB}f${!TAB}swap${!TAB}${!TAB}swap${!TAB},    ${!TAB}${!ALIGN=RIGHT}#1${!TAB}primary${!TAB}${!ALIGN=RIGHT}5.0 GB${!TAB}${!TAB}f${!TAB}ext3${!TAB}${!TAB}/var/cache/openafs${!TAB}, , Undo changes to partitions, Finish partitioning and write changes to disk
+partman-base   partman/choose_partition        select  90finish__________finish
+# Failed to partition the selected disk
+partman-auto   partman-auto/no_recipe  error   
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/error/nogetrelsig    error   
+# Empty passphrase
+partman-crypto partman-crypto/passphrase-empty error   
+# Failed to delete the software RAID device
+partman-md     partman-md/deletefailed error   
+# 
+# Choices: Brazil, Portugal, other
+d-i    localechooser/shortlist/pt      select  
+# for internal use; can be preseeded
+d-i    preseed/early_command   string  
+# Unsupported initrd generator
+bootstrap-base base-installer/initramfs/unsupported    error   
+# WEP key for wireless device :
+d-i    netcfg/wireless_wep     string  
+# location
+# Choices: Madrid, Ceuta, Canary Islands
+tzsetup-udeb   tzsetup/country/ES      select  
+# Unable to configure GRUB
+grub-installer grub-installer/multipath-error  error   
+# for internal use; can be preseeded
+bootstrap-base base-installer/includes string  
+# for internal use only
+d-i    debian-installer/exit/always_halt       boolean false
+# Partition in use
+partman-base   partman-base/partlocked error   
+# location
+# Choices: Auckland, Chatham Islands
+tzsetup-udeb   tzsetup/country/NZ      select  
+# Cannot access repository
+apt-setup-udeb apt-setup/service-failed        error   
+# 
+# Choices: Africa, Antarctica, Asia, Atlantic Ocean, Caribbean, Central America, Europe, Indian Ocean, North America, Oceania, South America
+d-i    localechooser/continentlist     select  
+# Write the changes to disks?
+partman-base   partman/confirm boolean false
+# Are you sure you want to use a random key?
+partman-crypto partman-crypto/use_random_for_nonswap   boolean false
+# Device for boot loader installation:
+grub-installer grub-installer/bootdev  string  
+# IP address:
+d-i    netcfg/get_ipaddress    string  69.90.123.70
+# Really erase the data on ?
+partman-crypto partman-crypto/warn_erase       boolean false
+# Invalid logical volume or volume group name
+partman-lvm    partman-lvm/badnamegiven        error   
+# Encryption for this partition:
+# Choices: 
+partman-crypto partman-crypto/cipher   select  
+# Malformed IP address
+d-i    netcfg/bad_ipaddress    error   
+# How should the debug logs be saved or transferred?
+# Choices: floppy, web, mounted file system
+d-i    save-logs/menu  select  
+# Continue without a default route?
+d-i    netcfg/no_default_route boolean 
+# Unable to install GRUB in 
+grub-installer grub-installer/grub-install-failed      error   
+# GRUB installation failed
+grub-installer grub-installer/apt-install-failed       error   
+# Volume group to delete:
+# Choices: 
+partman-lvm    partman-lvm/vgdelete_names      select  
+# Flags for the new partition:
+# Choices: 
+partman-partitioning   partman-partitioning/set_flags  multiselect     
+# Continue with the installation?
+partman-base   partman/confirm_nochanges       boolean false
+# Logical Volume Management
+partman-lvm    partman-lvm/help        note    
+# LILO configured to use a serial console
+lilo-installer lilo-installer/serial-console   note    
+# Logical volume name:
+partman-lvm    partman-lvm/lvcreate_name       string  
+# Initialisation of encrypted volume failed
+partman-crypto partman-crypto/init_failed      error   
+# Write the changes to the storage devices and configure RAID?
+partman-md     partman-md/confirm      boolean false
+# for internal use; can be preseeded
+d-i    rescue/enable   boolean false
+# No logical volume name entered
+partman-lvm    partman-lvm/lvcreate_nonamegiven        error   
+# Insert formatted floppy in drive
+d-i    save-logs/insert_floppy note    
+# Devices to encrypt:
+# Choices: 
+partman-crypto partman-crypto/create/partitions        multiselect     
+# Use unrecommended JFS /boot file system?
+partman-jfs    partman-jfs/jfs_boot    boolean false
+# Translations temporarily not available
+d-i    localechooser/translation/none-yet      note    
+# Proceed with installation to unclean target?
+base-installer base-installer/use_unclean_target       boolean true
+# Wait another 30 seconds for hwclock to set the clock?
+clock-setup    clock-setup/hwclock-wait        boolean false
+# for internal use only
+d-i    debconf/translations-dropped    boolean false
+# Setting firmware variables for automatic boot
+nobootloader   nobootloader/confirmation_powerpc_pasemi        note    
+# Country to base default locale settings on:
+# Choices: Antigua and Barbuda${!TAB}-${!TAB}en_AG, Australia${!TAB}-${!TAB}en_AU.UTF-8, Botswana${!TAB}-${!TAB}en_BW.UTF-8, Canada${!TAB}-${!TAB}en_CA.UTF-8, Hong Kong${!TAB}-${!TAB}en_HK.UTF-8, India${!TAB}-${!TAB}en_IN, Ireland${!TAB}-${!TAB}en_IE.UTF-8, New Zealand${!TAB}-${!TAB}en_NZ.UTF-8, Nigeria${!TAB}-${!TAB}en_NG, Philippines${!TAB}-${!TAB}en_PH.UTF-8, Singapore${!TAB}-${!TAB}en_SG.UTF-8, South Africa${!TAB}-${!TAB}en_ZA.UTF-8, United Kingdom${!TAB}-${!TAB}en_GB.UTF-8, United States${!TAB}-${!TAB}en_US.UTF-8, Zimbabwe${!TAB}-${!TAB}en_ZW.UTF-8
+d-i    localechooser/preferred-locale  select  en_US.UTF-8
+# 
+# Choices: Spain, France, other
+d-i    localechooser/shortlist/eu      select  
+# Go back to the menu?
+partman-basicmethods   partman-basicmethods/method_only        boolean 
+# Separate file system not allowed here
+partman-target partman-target/must_be_on_root  error   
+# No physical volumes selected
+partman-lvm    partman-lvm/vgextend_nosel      error   
+# Error while initializing physical volume
+partman-lvm    partman-lvm/pvcreate_error      error   
+# 
+# Choices: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, French Guiana, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela
+d-i    localechooser/countrylist/South_America select  
+# Keep current partition layout and configure encrypted volumes?
+partman-crypto partman-crypto/confirm_nochanges        boolean false
+# 
+# Choices: Serbia, Montenegro, other
+d-i    localechooser/shortlist/sr      select  
+# Invalid size
+partman-partitioning   partman-partitioning/bad_new_partition_size     error   
+# Write previous changes to disk and continue?
+partman-partitioning   partman-partitioning/confirm_resize     boolean 
+# Partition settings:
+# Choices: Use as:${!TAB}Ext3 journaling file system, , Mount point:${!TAB}/, Mount options:${!TAB}defaults, Label:${!TAB}none, Reserved blocks:${!TAB}5%, Typical usage:${!TAB}standard, Bootable flag:${!TAB}off, , Copy data from another partition, Delete the partition, Done setting up the partition
+partman-base   partman/active_partition        select  99finish__________finished
+# Domain name:
+d-i    netcfg/get_domain       string  hcoop.net
+# location
+# Choices: McMurdo, Rothera, Palmer, Mawson, Davis, Casey, Vostok, Dumont-d'Urville, Syowa
+tzsetup-udeb   tzsetup/country/AQ      select  
+# for internal use; can be preseeded
+d-i    hw-detect/load-ide      boolean false
+# for internal use; can be preseeded
+d-i    preseed/interactive     boolean false
+# Installation step failed
+d-i    debian-installer/main-menu/item-failure error   
+# Error while running ''
+d-i    hw-detect/modprobe_error        error   
+# Continue with partitioning?
+partman-partitioning   partman-partitioning/unsupported_label  boolean false
+# for internal use; can be preseeded
+# Choices: cylinder, minimal, optimal
+partman-base   partman/alignment       select  optimal
+# Install the GRUB boot loader to the master boot record?
+grub-installer grub-installer/with_other_os    boolean true
+# No volume group found
+partman-lvm    partman-lvm/lvcreate_nofreevg   error   
+# Reserved username
+user-setup-udeb        passwd/username-reserved        error   
+# for internal use only
+partman-auto-raid      partman-auto-raid/raidnum       string  
+# No devices selected
+partman-crypto partman-crypto/create/nosel     error   
+# 
+partman-base   partman/exception_handler_note  note    
+# Invalid hostname
+d-i    netcfg/invalid_hostname error   
+# 
+# Choices: Pakistan, India, other
+d-i    localechooser/shortlist/pa      select  
+# for internal use; can be preseeded
+partman-base   partman/early_command   string  
+# city
+# Choices: Ulaanbaatar, Hovd, Choibalsan
+tzsetup-udeb   tzsetup/country/MN      select  
+# for internal use; can be preseeded
+partman-base   partman/default_filesystem      string  ext3
+# for internal use; can be preseeded
+d-i    auto-install/enable     boolean false
+# Create a normal user account now?
+user-setup-udeb        passwd/make-user        boolean true
+# Name of the volume group for the new system:
+partman-auto-lvm       partman-auto-lvm/new_vg_name    string  
+# Language:
+# Choices: C${!TAB}-${!TAB}No localization, Albanian${!TAB}-${!TAB}Shqip, Arabic${!TAB}-${!TAB}عربي, Asturian${!TAB}-${!TAB}Asturianu, Basque${!TAB}-${!TAB}Euskara, Belarusian${!TAB}-${!TAB}Беларуская, Bosnian${!TAB}-${!TAB}Bosanski, Bulgarian${!TAB}-${!TAB}Български, Catalan${!TAB}-${!TAB}Català, Chinese (Simplified)${!TAB}-${!TAB}中文(简体), Chinese (Traditional)${!TAB}-${!TAB}中文(繁體), Croatian${!TAB}-${!TAB}Hrvatski, Czech${!TAB}-${!TAB}Čeština, Danish${!TAB}-${!TAB}Dansk, Dutch${!TAB}-${!TAB}Nederlands, English${!TAB}-${!TAB}English, Esperanto${!TAB}-${!TAB}Esperanto, Estonian${!TAB}-${!TAB}Eesti, Finnish${!TAB}-${!TAB}Suomi, French${!TAB}-${!TAB}Français, Galician${!TAB}-${!TAB}Galego, German${!TAB}-${!TAB}Deutsch, Greek${!TAB}-${!TAB}Ελληνικά, Hebrew${!TAB}-${!TAB}עברית, Hungarian${!TAB}-${!TAB}Magyar, Icelandic${!TAB}-${!TAB}Íslenska, Indonesian${!TAB}-${!TAB}Bahasa Indonesia, Irish${!TAB}-${!TAB}Gaeilge, Italian${!TAB}-${!TAB}Italiano, Japanese${!TAB}-${!TAB}日本語, Kazakh${!TAB}-${!TAB}Қазақ, Korean${!TAB}-${!TAB}한국어, Kurdish${!TAB}-${!TAB}Kurdî, Latvian${!TAB}-${!TAB}Latviski, Lithuanian${!TAB}-${!TAB}Lietuviškai, Macedonian${!TAB}-${!TAB}Македонски, Northern Sami${!TAB}-${!TAB}Sámegillii, Norwegian Bokmaal${!TAB}-${!TAB}Norsk bokmål, Norwegian Nynorsk${!TAB}-${!TAB}Norsk nynorsk, Persian${!TAB}-${!TAB}فارسی, Polish${!TAB}-${!TAB}Polski, Portuguese${!TAB}-${!TAB}Português, Portuguese (Brazil)${!TAB}-${!TAB}Português do Brasil, Romanian${!TAB}-${!TAB}Română, Russian${!TAB}-${!TAB}Русский, Serbian (Cyrillic)${!TAB}-${!TAB}Српски, Slovak${!TAB}-${!TAB}Slovenčina, Slovenian${!TAB}-${!TAB}Slovenščina, Spanish${!TAB}-${!TAB}Español, Swedish${!TAB}-${!TAB}Svenska, Tagalog${!TAB}-${!TAB}Tagalog, Thai${!TAB}-${!TAB}ภาษาไทย, Turkish${!TAB}-${!TAB}Türkçe, Ukrainian${!TAB}-${!TAB}Українська, Vietnamese${!TAB}-${!TAB}Tiếng Việt
+d-i    localechooser/languagelist      select  en
+# Not enough RAID partitions available
+partman-md     partman-md/notenoughparts       error   
+# Installer components to load:
+# Choices: 
+d-i    anna/choose_modules_lowmem      multiselect     
+# Debootstrap warning
+bootstrap-base base-installer/debootstrap/fallback-warning     error   
+# Unsafe swap space detected
+partman-crypto partman-crypto/unsafe_swap      error   
+# for internal use only
+d-i    debian-installer/language       string  en
+# city
+# Choices: Kinshasa, Lubumbashi
+tzsetup-udeb   tzsetup/country/CD      select  
+# No DHCP client found
+d-i    netcfg/no_dhcp_client   error   
+# Select disk(s) to partition:
+# Choices: 
+partman-auto   partman-auto/select_disks       multiselect     
+# location
+# Choices: Tahiti (Society Islands), Marquesas Islands, Gambier Islands
+tzsetup-udeb   tzsetup/country/PF      select  
+# Go back to the menu and correct errors?
+partman-basicfilesystems       partman-basicfilesystems/swap_check_failed      boolean 
+# Software RAID device type:
+# Choices: RAID0, RAID1, RAID5, RAID6, RAID10
+partman-md     partman-md/createmain   select  
+# Label for the file system in this partition:
+partman-basicfilesystems       partman-basicfilesystems/choose_label   string  
+# Password input error
+grub-installer grub-installer/password-mismatch        error   
+# Debian archive mirror:
+# Choices: ftp.us.debian.org, ftp.egr.msu.edu, mirrors.kernel.org, debian.lcs.mit.edu, debian.osuosl.org, mirror.cc.columbia.edu, mirror.hmc.edu, mirrors.hosef.org, debian.cc.lehigh.edu, cdn.debian.net, ftp.gtlib.gatech.edu, distro.ibiblio.org, ftp-mirror.internap.com, mirror.cs.wisc.edu, ftp.uwsg.indiana.edu, ftp.ndlug.nd.edu, debian.uchicago.edu, carroll.aset.psu.edu, mirrors.xmission.com, ftp.keystealth.org, ftp.lug.udel.edu, linux.csua.berkeley.edu, debian.secsup.org, mirror.anl.gov, sluglug.ucsc.edu, mirrors.geeks.org, mirrors.usc.edu, lug.mtu.edu, debian.mirrors.tds.net, debian.cites.uiuc.edu, mirrors.tummy.com, debian.mirror.frontiernet.net, ftp.grokthis.net, mirrors.xenir.com, debian.mirrors.easynews.com, mirrors.acm.jhu.edu, mirror.steadfast.net, ftp.utexas.edu, mirror.fdcservers.net, mirror.rit.edu, debian.corenetworks.net, mirror.its.uidaho.edu, debian.cs.binghamton.edu, mirrors.modwest.com, mirrors.bloomu.edu, debian.usu.edu, debian.securedservers.com
+d-i    mirror/http/mirror      select  ftp.us.debian.org
+# 
+# Choices: Anguilla, Antigua and Barbuda, Aruba, Bahamas, Barbados, Bermuda, Cayman Islands, Cuba, Dominica, Dominican Republic, Grenada, Guadeloupe, Haiti, Jamaica, Martinique, Montserrat, Netherlands Antilles, Puerto Rico, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Vincent and the Grenadines, Trinidad and Tobago, Turks and Caicos Islands, Virgin Islands\, British, Virgin Islands\, U.S.
+d-i    localechooser/countrylist/Caribbean     select  
+# Language selection no longer possible
+d-i    localechooser/translation/no-select     note    
+# Downloading a file failed:
+# Choices: Retry, Change mirror, Cancel
+d-i    retriever/net/error     select  Retry
+# 
+# Choices: Afghanistan, Bahrain, Bangladesh, Bhutan, Brunei Darussalam, Cambodia, China, Hong Kong, India, Indonesia, Iran\, Islamic Republic of, Iraq, Israel, Japan, Jordan, Kazakhstan, Korea\, Democratic People's Republic of, Korea\, Republic of, Kuwait, Kyrgyzstan, Lao People's Democratic Republic, Lebanon, Macao, Malaysia, Mongolia, Myanmar, Nepal, Oman, Pakistan, Palestinian Territory\, Occupied, Philippines, Qatar, Saudi Arabia, Singapore, Sri Lanka, Syrian Arab Republic, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates, Uzbekistan, Viet Nam, Yemen
+d-i    localechooser/countrylist/Asia  select  
+# Write the changes to disk and configure encrypted volumes?
+d-i    partman-crypto/confirm_nooverwrite      boolean false
+# zone
+# Choices: Tarawa (Gilbert Islands), Enderbury (Phoenix Islands), Kiritimati (Line Islands)
+tzsetup-udeb   tzsetup/country/KI      select  
+# Debian archive mirror directory:
+d-i    mirror/ftp/directory    string  /debian/
+# Set the clock using NTP?
+clock-setup    clock-setup/ntp boolean true
+# for internal use; can be preseeded
+d-i    debian-installer/country        string  US
+# for internal use only
+bootstrap-base base-installer/kernel/linux/link_in_boot        boolean false
+# No file system mounted on /target
+base-installer base-installer/no_target_mounted        error   
+# What to do with this device:
+# Choices: 
+partman-base   partman/storage_device  select  
+# Base system installation error
+bootstrap-base base-installer/debootstrap/error-abnormal       error   
+# Partitioning method:
+# Choices: Guided - use entire disk, Guided - use entire disk and set up LVM, Guided - use entire disk and set up encrypted LVM, Manual
+partman-auto   partman-auto/init_automatically_partition       select  50some_device__________regular
+# Failed to create a swap space
+partman-basicfilesystems       partman-basicfilesystems/create_swap_failed     error   
+# 
+# Choices: Belgium, Germany, Liechtenstein, Luxembourg, Austria, Switzerland, other
+d-i    localechooser/shortlist/de      select  
+# Write the changes to disks and configure LVM?
+partman-lvm    partman-lvm/confirm     boolean false
+# Software RAID not available
+partman-md     partman-md/nomd error   
+# for internal use; can be preseeded
+d-i    anna/standard_modules   boolean true
+# Really delete the volume group?
+partman-lvm    partman-lvm/vgdelete_confirm    boolean true
+# Failed to process the preconfiguration file
+d-i    preseed/load_error      error   
+# No volume group found
+partman-lvm    partman-lvm/vgextend_novg       error   
+# for internal use; can be preseeded
+d-i    netcfg/disable_dhcp     boolean false
+# for internal use only
+d-i    mirror/codename string  squeeze
+# Continue installation without /boot partition?
+partman-auto-lvm       partman-auto-lvm/no_boot        boolean 
+# Write a new empty partition table?
+partman-partitioning   partman-partitioning/confirm_write_new_label    boolean false
+# Use non-free software?
+apt-mirror-setup       apt-setup/non-free      boolean false
+# Write the changes to disk and configure encrypted volumes?
+partman-crypto partman-crypto/confirm  boolean false
+# for internal use; can be preseeded
+# Choices: traditional, label, uuid
+partman-target partman/mount_style     select  uuid
+# Wireless ESSID for :
+d-i    netcfg/wireless_essid_again     string  
+# location
+# Choices: Godthab, Danmarkshavn, Scoresbysund, Thule
+tzsetup-udeb   tzsetup/country/GL      select  
+# Keyfile creation failure
+partman-crypto partman-crypto/keyfile-problem  error   
+# Software RAID configuration actions
+# Choices: Create MD device, Delete MD device, Finish
+partman-md     partman-md/mainmenu     select  
+# zone
+# Choices: Moscow-01 - Kaliningrad, Moscow+00 - west Russia, Moscow+01 - Samara, Moscow+02 - Urals, Moscow+03 - west Siberia, Moscow+03 - Novosibirsk, Moscow+04 - Yenisei River, Moscow+05 - Lake Baikal, Moscow+06 - Lena River, Moscow+07 - Amur River, Moscow+07 - Sakhalin Island, Moscow+08 - Magadan, Moscow+09 - Kamchatka, Moscow+10 - Bering Sea
+tzsetup-udeb   tzsetup/country/RU      select  Europe/Moscow
+# Current LVM configuration:
+partman-lvm    partman-lvm/displayall  note    
+# Cannot install kernel
+bootstrap-base base-installer/kernel/no-kernels-found  error   
+# for internal use; can be preseeded
+d-i    debian-installer/allow_unauthenticated  boolean false
+# Downloading a file failed:
+# Choices: Retry, Change mirror, Ignore
+apt-mirror-setup       apt-setup/mirror/error  select  Retry
+# for internal use only
+bootstrap-base base-installer/kernel/linux/initrd-2.6  boolean true
+# for internal use; can be preseeded
+d-i    ethdetect/prompt_missing_firmware       boolean true
+# Continue the installation in the selected language?
+d-i    localechooser/translation/warn-severe   boolean false
+# for internal use; can be preseeded
+d-i    debian-installer/theme  string  
+# 
+# Choices: American Samoa, Australia, Cook Islands, Fiji, French Polynesia, Guam, Kiribati, Marshall Islands, Micronesia\, Federated States of, Nauru, New Caledonia, New Zealand, Niue, Norfolk Island, Northern Mariana Islands, Palau, Papua New Guinea, Pitcairn, Samoa, Solomon Islands, Tokelau, Tonga, Tuvalu, United States Minor Outlying Islands, Vanuatu, Wallis and Futuna
+d-i    localechooser/countrylist/Oceania       select  
+# No boot loader installed
+nobootloader   nobootloader/confirmation_common        note    
+# zone
+# Choices: Santiago, Easter Island
+tzsetup-udeb   tzsetup/country/CL      select  
+# Are you sure you want to exit now?
+d-i    di-utils-reboot/really_reboot   boolean false
+# 
+# Choices: Brazil, Portugal, other
+d-i    localechooser/shortlist/pt_BR   select  
+# Tool to use to generate boot initrd:
+# Choices: 
+bootstrap-base base-installer/initramfs/generator      select  
+# for internal use only
+d-i    debconf/frontend        string  newt
+# Error while deleting the logical volume
+partman-lvm    partman-lvm/lvdelete_error      error   
+# Choose software to install:
+# Choices: Graphical desktop environment, Web server, Print server, DNS server, File server, Mail server, SQL database, SSH server, Laptop, Standard system utilities
+d-i    tasksel/first   multiselect     SSH server, Standard system utilities
+# Use unrecommended JFS root file system?
+partman-jfs    partman-jfs/jfs_root    boolean false
+# Invalid partition name
+lilo-installer lilo-installer/manual_bootdev_error     error   
+# Invalid ESSID
+d-i    netcfg/invalid_essid    error   
+# for internal use; can be preseeded
+d-i    debian-installer/exit/halt      boolean false
+# Partition table type:
+# Choices: aix, amiga, bsd, dvh, gpt, mac, msdos, pc98, sun, loop
+partman-partitioning   partman-partitioning/choose_label       select  msdos
+# No usable physical volumes found
+partman-lvm    partman-lvm/nopartitions        error   
+# btrfs root file system not supported without separate /boot
+partman-btrfs  partman-btrfs/btrfs_root        error   
+# Would you like to make this partition active?
+lilo-installer lilo-installer/activate-part    boolean true
+# Bad archive mirror
+d-i    mirror/bad      error   
+# 
+# Choices: Belize, Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua, Panama
+d-i    localechooser/countrylist/Central_America       select  
+# Select your time zone:
+# Choices: Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Arizona, East Indiana, Samoa
+tzsetup-udeb   time/zone       select  US/Eastern
+# Failed to create a file system
+partman-basicfilesystems       partman-basicfilesystems/create_failed  error   
+# LILO installation target:
+# Choices: : Master Boot Record, : new Debian partition, Other choice (Advanced)
+lilo-installer lilo-installer/bootdev  select  
+# Use weak passphrase?
+partman-crypto partman-crypto/weak_passphrase  boolean false
+# Use a network mirror?
+apt-mirror-setup       apt-setup/use_mirror    boolean 
+# Protocol for file downloads:
+# Choices: http, ftp
+d-i    mirror/protocol select  http
+# Source partition:
+# Choices: 
+partman-partitioning   partman-partitioning/source_partition   select  
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/error/nogetrel       error   
+# Ethernet card not found
+d-i    ethdetect/cannot_find   error   
+# for internal use; can be preseeded
+d-i    preseed/url/checksum    string  
+# Volume group name already in use
+partman-lvm    partman-lvm/vgcreate_nameused   error   
+# Mount point for this partition:
+# Choices: / - the root file system, /boot - static files of the boot loader, /home - user home directories, /tmp - temporary files, /usr - static data, /var - variable data, /srv - data for services provided by this system, /opt - add-on application software packages, /usr/local - local hierarchy, Enter manually, Do not mount it
+partman-basicfilesystems       partman-basicfilesystems/mountpoint     select  / - the root file system
+# location
+# Choices: Yap, Truk, Ponape, Kosrae
+tzsetup-udeb   tzsetup/country/FM      select  
+# Spare devices for the RAID array:
+# Choices: 
+partman-md     partman-md/raidsparedevs        multiselect     
+# Key size for this partition:
+# Choices: 
+partman-crypto partman-crypto/keysize  select  
+# No partitionable media
+disk-detect    disk-detect/cannot_find error   
+# Installer components to load:
+# Choices: ai-console-setup-udeb: Delayed configuration of keyboard for auto-install, ai-kbd-chooser: Delayed configuration of keyboard for auto-install, ai-localechooser: Delayed configuration of locale for auto-install, auto-install: Support for automatic installs, cdrom-checker: Verify the cd contents, cdrom-detect: Detect CDROM devices and mount the CD, cfdisk-udeb: Manually partition a hard drive (cfdisk), console-setup-udeb: Configure the keyboard, cpuburn-udeb: perform CPU stress test (burn in) - expert use only, crypto-dm-modules-2.6.32-5-amd64-di: devicemapper crypto module, crypto-modules-2.6.32-5-amd64-di: crypto modules, debian-edu-install-udeb: Execute Debian Edu debian-installer profile, debian-edu-profile-udeb: Choose Debian Edu profile, di-utils-exit-installer: Exit installer, driver-injection-disk-detect: Detect OEM driver injection disks, eject-udeb: ejects CDs from d-i menu, emdebian-archive-keyring-udeb: GnuPG keys of the Emdebian archive - udeb, event-modules-2.6.32-5-amd64-di: Event support, file-preseed: load debconf preseed file, i2c-modules-2.6.32-5-amd64-di: i2c support modules, irda-modules-2.6.32-5-amd64-di: Infrared devices support, iso-scan: Scan hard drives for an installer ISO image, live-installer: Install the system, load-cdrom: Load installer components from CD, load-floppy: Load installer components from a floppy, load-iso: Load installer components from an installer ISO, load-media: Load installer components from removable media, lowmem: free memory for lowmem install, ltsp-client-builder: build an LTSP environment in the installer target, lvmcfg: Configure the Logical Volume Manager, mdcfg: Configure MD devices, mouse-modules-2.6.32-5-amd64-di: Mouse support, multipath-modules-2.6.32-5-amd64-di: Multipath support, netcfg-static: Configure a static network, network-console: Continue installation remotely using SSH, ntfs-modules-2.6.32-5-amd64-di: NTFS filesystem support, openssh-client-udeb: secure shell client for the Debian installer, parted-udeb: Manually partition a hard drive (parted), partman-reiserfs: Add to partman support for reiserfs, plip-modules-2.6.32-5-amd64-di: PLIP drivers, ppp-modules-2.6.32-5-amd64-di: PPP drivers, ppp-udeb: Point-to-Point Protocol (PPP) - package for Debian Installer, qnx4-modules-2.6.32-5-amd64-di: QNX4 filesystem support, reiserfs-modules-2.6.32-5-amd64-di: Reiser filesystem support, rescue-mode: mount requested partition and start a rescue shell, sound-modules-2.6.32-5-amd64-di: sound support, speakup-modules-2.6.32-5-amd64-di: speakup modules, squashfs-modules-2.6.32-5-amd64-di: squashfs modules
+d-i    anna/choose_modules     multiselect     
+# Do you want to return to the partitioning menu?
+partman-basicfilesystems       partman-basicfilesystems/no_swap        boolean true
+# The partition starts from  and ends at .
+partman-base   partman/show_partition_chs      note    
+# Software RAID device to be deleted:
+# Choices: 
+partman-md     partman-md/deletemenu   select  
+# Are you sure you want a bootable logical partition?
+partman-partitioning   partman-partitioning/bootable_logical   boolean false
+# Mount point for this partition:
+# Choices: /dos, /windows, Enter manually, Do not mount it
+partman-basicfilesystems       partman-basicfilesystems/fat_mountpoint select  
+# Error while extending volume group
+partman-lvm    partman-lvm/vgextend_error      error   
+# Volume group name already in use
+partman-auto-lvm       partman-auto-lvm/vg_exists      error   
+# Help on partitioning
+partman-target partman-target/help     note    
+# country code or "manual" (for internal use)
+d-i    mirror/country  string  US
+# No volume group name entered
+partman-lvm    partman-lvm/vgcreate_nonamegiven        error   
+# Required programs missing
+partman-crypto partman-crypto/tools_missing    note    
+# Logical volume size:
+partman-lvm    partman-lvm/lvcreate_size       string  
+# Debootstrap Error
+bootstrap-base base-installer/debootstrap/error/missingrelentry        error   
+# LILO installation target:
+lilo-installer lilo-installer/manual_bootdev   string  
+# Devices to add to the volume group:
+# Choices: 
+partman-lvm    partman-lvm/vgextend_parts      multiselect     
+# for internal use; can be preseeded
+lilo-installer lilo-installer/skip     boolean false
+# zone
+# Choices: Newfoundland, Atlantic, Eastern, Central, East Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon
+tzsetup-udeb   tzsetup/country/CA      select  Canada/Eastern
+# Terminal plugin not available
+d-i    debian-installer/terminal-plugin-unavailable    error   
+# For internal use (keyboard chosen by user)
+d-i    debian-installer/keymap string  us
+# Password input error
+user-setup-udeb        user-setup/password-mismatch    error   
+# Additional locales:
+# Choices: aa_DJ.UTF-8, aa_DJ, aa_ER, aa_ER@saaho, aa_ET, af_ZA.UTF-8, af_ZA, am_ET, an_ES.UTF-8, an_ES, ar_AE.UTF-8, ar_AE, ar_BH.UTF-8, ar_BH, ar_DZ.UTF-8, ar_DZ, ar_EG.UTF-8, ar_EG, ar_IN, ar_IQ.UTF-8, ar_IQ, ar_JO.UTF-8, ar_JO, ar_KW.UTF-8, ar_KW, ar_LB.UTF-8, ar_LB, ar_LY.UTF-8, ar_LY, ar_MA.UTF-8, ar_MA, ar_OM.UTF-8, ar_OM, ar_QA.UTF-8, ar_QA, ar_SA.UTF-8, ar_SA, ar_SD.UTF-8, ar_SD, ar_SY.UTF-8, ar_SY, ar_TN.UTF-8, ar_TN, ar_YE.UTF-8, ar_YE, az_AZ.UTF-8, as_IN.UTF-8, ast_ES.UTF-8, ast_ES, be_BY.UTF-8, be_BY, be_BY@latin, ber_DZ, ber_MA, bg_BG.UTF-8, bg_BG, bn_BD, bn_IN, bo_CN, bo_IN, br_FR.UTF-8, br_FR, br_FR@euro, bs_BA.UTF-8, bs_BA, byn_ER, ca_AD.UTF-8, ca_AD, ca_ES.UTF-8, ca_ES, ca_ES@euro, ca_ES.UTF-8@valencia, ca_ES@valencia, ca_FR.UTF-8, ca_FR, ca_IT.UTF-8, ca_IT, crh_UA, cs_CZ.UTF-8, cs_CZ, csb_PL, cy_GB.UTF-8, cy_GB, da_DK.UTF-8, da_DK, de_AT.UTF-8, de_AT, de_AT@euro, de_BE.UTF-8, de_BE, de_BE@euro, de_CH.UTF-8, de_CH, de_DE.UTF-8, de_DE, de_DE@euro, de_LI.UTF-8, de_LU.UTF-8, de_LU, de_LU@euro, dv_MV, dz_BT, el_GR.UTF-8, el_GR, el_CY.UTF-8, el_CY, en_AG, en_AU.UTF-8, en_AU, en_BW.UTF-8, en_BW, en_CA.UTF-8, en_CA, en_DK.UTF-8, en_DK.ISO-8859-15, en_DK, en_GB.UTF-8, en_GB, en_GB.ISO-8859-15, en_HK.UTF-8, en_HK, en_IE.UTF-8, en_IE, en_IE@euro, en_IN, en_NG, en_NZ.UTF-8, en_NZ, en_PH.UTF-8, en_PH, en_SG.UTF-8, en_SG, en_US, en_US.ISO-8859-15, en_ZA.UTF-8, en_ZA, en_ZW.UTF-8, en_ZW, eo.UTF-8, eo, es_AR.UTF-8, es_AR, es_BO.UTF-8, es_BO, es_CL.UTF-8, es_CL, es_CO.UTF-8, es_CO, es_CR.UTF-8, es_CR, es_DO.UTF-8, es_DO, es_EC.UTF-8, es_EC, es_ES.UTF-8, es_ES, es_ES@euro, es_GT.UTF-8, es_GT, es_HN.UTF-8, es_HN, es_MX.UTF-8, es_MX, es_NI.UTF-8, es_NI, es_PA.UTF-8, es_PA, es_PE.UTF-8, es_PE, es_PR.UTF-8, es_PR, es_PY.UTF-8, es_PY, es_SV.UTF-8, es_SV, es_US.UTF-8, es_US, es_UY.UTF-8, es_UY, es_VE.UTF-8, es_VE, et_EE.UTF-8, et_EE, et_EE.ISO-8859-15, eu_ES.UTF-8, eu_ES, eu_ES@euro, eu_FR.UTF-8, eu_FR, eu_FR@euro, fa_IR, fi_FI.UTF-8, fi_FI, fi_FI@euro, fil_PH, fo_FO.UTF-8, fo_FO, fr_BE.UTF-8, fr_BE, fr_BE@euro, fr_CA.UTF-8, fr_CA, fr_CH.UTF-8, fr_CH, fr_FR.UTF-8, fr_FR, fr_FR@euro, fr_LU.UTF-8, fr_LU, fr_LU@euro, fur_IT, fy_NL, fy_DE, ga_IE.UTF-8, ga_IE, ga_IE@euro, gd_GB.UTF-8, gd_GB, gez_ER, gez_ER@abegede, gez_ET, gez_ET@abegede, gl_ES.UTF-8, gl_ES, gl_ES@euro, gu_IN, gv_GB.UTF-8, gv_GB, ha_NG, he_IL.UTF-8, he_IL, hi_IN, hne_IN, hr_HR.UTF-8, hr_HR, hsb_DE.UTF-8, hsb_DE, ht_HT, hu_HU.UTF-8, hu_HU, hy_AM, hy_AM.ARMSCII-8, ia, id_ID.UTF-8, id_ID, ig_NG, ik_CA, is_IS.UTF-8, is_IS, it_CH.UTF-8, it_CH, it_IT.UTF-8, it_IT, it_IT@euro, iu_CA, iw_IL.UTF-8, iw_IL, ja_JP.UTF-8, ja_JP.EUC-JP, ka_GE.UTF-8, ka_GE, kk_KZ.UTF-8, kk_KZ, kl_GL.UTF-8, kl_GL, km_KH, kn_IN, ko_KR.UTF-8, ko_KR.EUC-KR, ks_IN, ks_IN@devanagari, ku_TR.UTF-8, ku_TR, kw_GB.UTF-8, kw_GB, ky_KG, lg_UG.UTF-8, lg_UG, li_BE, li_NL, lo_LA, lt_LT.UTF-8, lt_LT, lv_LV.UTF-8, lv_LV, mai_IN, mg_MG.UTF-8, mg_MG, mi_NZ.UTF-8, mi_NZ, mk_MK.UTF-8, mk_MK, ml_IN, mn_MN, mr_IN, ms_MY.UTF-8, ms_MY, mt_MT.UTF-8, mt_MT, my_MM, nan_TW@latin, nb_NO.UTF-8, nb_NO, nds_DE, nds_NL, ne_NP, nl_AW, nl_BE.UTF-8, nl_BE, nl_BE@euro, nl_NL.UTF-8, nl_NL, nl_NL@euro, nn_NO.UTF-8, nn_NO, nr_ZA, nso_ZA, oc_FR.UTF-8, oc_FR, om_ET, om_KE.UTF-8, om_KE, or_IN, pa_IN, pa_PK, pap_AN, pl_PL.UTF-8, pl_PL, ps_AF, pt_BR.UTF-8, pt_BR, pt_PT.UTF-8, pt_PT, pt_PT@euro, ro_RO.UTF-8, ro_RO, ru_RU.UTF-8, ru_RU.KOI8-R, ru_RU, ru_RU.CP1251, ru_UA.UTF-8, ru_UA, rw_RW, sa_IN, sc_IT, sd_IN, sd_IN@devanagari, se_NO, shs_CA, si_LK, sid_ET, sk_SK.UTF-8, sk_SK, sl_SI.UTF-8, sl_SI, so_DJ.UTF-8, so_DJ, so_ET, so_KE.UTF-8, so_KE, so_SO.UTF-8, so_SO, sq_AL.UTF-8, sq_AL, sr_ME, sr_RS, sr_RS@latin, ss_ZA, st_ZA.UTF-8, st_ZA, sv_FI.UTF-8, sv_FI, sv_FI@euro, sv_SE.UTF-8, sv_SE, sv_SE.ISO-8859-15, ta_IN, te_IN, tg_TJ.UTF-8, tg_TJ, th_TH.UTF-8, th_TH, ti_ER, ti_ET, tig_ER, tk_TM, tl_PH.UTF-8, tl_PH, tn_ZA, tr_CY.UTF-8, tr_CY, tr_TR.UTF-8, tr_TR, ts_ZA, tt_RU.UTF-8, tt_RU@iqtelif.UTF-8, ug_CN, uk_UA.UTF-8, uk_UA, ur_PK, uz_UZ.UTF-8, uz_UZ, uz_UZ@cyrillic, ve_ZA, vi_VN, vi_VN.TCVN, wa_BE.UTF-8, wa_BE, wa_BE@euro, wo_SN, xh_ZA.UTF-8, xh_ZA, yi_US.UTF-8, yi_US, yo_NG, zh_CN.UTF-8, zh_CN.GB18030, zh_CN.GBK, zh_CN, zh_HK.UTF-8, zh_HK, zh_SG.UTF-8, zh_SG.GBK, zh_SG, zh_TW.UTF-8, zh_TW.EUC-TW, zh_TW, zu_ZA.UTF-8, zu_ZA
+d-i    localechooser/supported-locales multiselect     
+# Failed to install the base system
+bootstrap-base base-installer/debootstrap-failed       error   
+# LVM configuration action:
+# Choices: 
+partman-lvm    partman-lvm/mainmenu    select  
+# Error while creating a new logical volume
+partman-lvm    partman-lvm/lvcreate_exists     error   
+# Location of initial preconfiguration file:
+d-i    preseed/url     string  
+# Base system installation error
+bootstrap-base base-installer/debootstrap/error-exitcode       error   
+# location
+# Choices: Johnston Atoll, Midway Islands, Wake Island
+tzsetup-udeb   tzsetup/country/UM      select  
+# Number of spare devices for the RAID array:
+partman-md     partman-md/raidsparecount       string  
+# for internal use; can be preseeded
+d-i    preseed/late_command    string  
+# Copy operation failure
+partman-partitioning   partman-partitioning/copy_commit_failed error   
+# Partitioning method:
+# Choices: Guided - use entire disk, Guided - use entire disk and set up LVM, Guided - use entire disk and set up encrypted LVM, Manual
+partman-auto   partman-auto/automatically_partition    select  50some_device__________regular
+# Configuration of encrypted volumes failed
+partman-crypto partman-crypto/commit_failed    error   
+# Failed to run preseeded command
+d-i    preseed/command_failed  error   
+# Modules to load:
+# Choices: usb-storage (USB storage)
+d-i    hw-detect/select_modules        multiselect     usb-storage (USB storage)
+# The resize operation is impossible
+partman-partitioning   partman-partitioning/impossible_resize  error   
+# Encryption package installation failure
+partman-crypto partman-crypto/module_package_missing   error   
+# for internal use; can be preseeded
+partman-auto-raid      partman-auto-raid/recipe        string  
+# Encryption method for this partition:
+# Choices: 
+partman-crypto partman-crypto/crypto_type      select  
+# Continue the installation in the selected language?
+d-i    localechooser/translation/warn-light    boolean true
+# 
+# Choices: Aruba, Belgium, Netherlands, other
+d-i    localechooser/shortlist/nl      select  
+# Invalid mount point
+partman-basicfilesystems       partman-basicfilesystems/bad_mountpoint error   
+# Type of encryption key hash for this partition:
+# Choices: 
+partman-crypto partman-crypto/keyhash  select  
+# Identical labels for two file systems
+partman-target partman-target/same_label       error   
+# Create new empty partition table on this device?
+partman-partitioning   partman-partitioning/confirm_new_label  boolean false
+# Write the changes to disks?
+partman-base   partman/confirm_nooverwrite     boolean false
+# No logical volume found
+partman-lvm    partman-lvm/lvdelete_nolv       error   
+# Keep current partition layout and configure RAID?
+partman-md     partman-md/confirm_nochanges    boolean false
+# Remove existing software RAID partitions?
+partman-md     partman-md/device_remove_md     boolean false
+# Layout of the RAID10 array:
+partman-md     partman-md/raid10layout string  
+# Unable to install 
+bootstrap-base base-installer/kernel/failed-package-install    error   
+# Installation complete
+finish-install finish-install/reboot_in_progress       note    
+# The free space starts from  and ends at .
+partman-base   partman/show_free_chs   note    
+# for internal use; can be preseeded
+pkgsel pkgsel/include  string  
+# 
+# Choices: British Indian Ocean Territory, Christmas Island, Cocos (Keeling) Islands, Comoros, French Southern Territories, Heard Island and McDonald Islands, Madagascar, Maldives, Mauritius, Mayotte, Reunion, Seychelles
+d-i    localechooser/countrylist/Indian_Ocean  select  
+# for internal use; can be preseeded
+d-i    preseed/boot_command    string  
+# Install the GRUB boot loader to the master boot record?
+grub-installer grub-installer/only_debian      boolean true
+# Partition name:
+partman-partitioning   partman-partitioning/set_name   string  
+# Web server started
+d-i    save-logs/httpd_running note    
+# System locale:
+# Choices: 
+d-i    debian-installer/locale select  en_US.UTF-8
+# Logical Volume Manager not available
+partman-lvm    partman-lvm/nolvm       error   
+# for internal use; can be preseeded
+base-installer base-installer/install-recommends       boolean true
+# Gateway:
+d-i    netcfg/get_gateway      string  69.90.123.65
+# LILO installation failed. Continue anyway?
+lilo-installer lilo-installer/apt-install-failed       boolean true
+# Netmask:
+d-i    netcfg/get_netmask      string  255.255.255.224
+# Mount options:
+# Choices: 
+partman-basicfilesystems       partman-basicfilesystems/mountoptions   multiselect     
+# Type of wireless network:
+# Choices: Infrastructure (Managed) network, Ad-hoc network (Peer to peer)
+d-i    netcfg/wireless_adhoc_managed   select  Infrastructure (Managed) network

diff --git a/preseed/testkvm0-debconf-target b/preseed/testkvm0-debconf-target
new file mode 100644 (file)
index 0000000..02154a5
--- /dev/null
+++ b/preseed/testkvm0-debconf-target
@@ -0,0 +1,375 @@
+# Time zone:
+# Choices: Adelaide, Brisbane, Broken Hill, Canberra, Currie, Darwin, Eucla, Hobart, Lindeman, Lord Howe, Melbourne, Perth, Sydney, Yancowinna
+tzdata tzdata/Zones/Australia  select  
+# Do you want system-wide readable home directories?
+adduser        adduser/homedir-permission      boolean true
+# What do you want to do about modified configuration file ?
+# Choices: install the package maintainer's version, keep the local version currently installed, show the differences between the versions, show a side-by-side difference between the versions, start a new shell to examine the situation
+ucf    ucf/changeprompt        select  keep_current
+# Time zone:
+# Choices: Alaska, Aleutian, Arizona, Central, Eastern, Hawaii, Indiana-Starke, Michigan, Mountain, Pacific, Pacific-New, Samoa
+tzdata tzdata/Zones/US select  
+# for internal use
+grub-pc        grub-pc/kopt_extracted  boolean false
+# Reconfigure exim4-config instead of this package
+exim4-daemon-light     exim4-daemon-light/drec error   
+# kFreeBSD command line:
+grub-pc        grub2/kfreebsd_cmdline  string  
+# Override local changes to /etc/pam.d/common-*?
+libpam-runtime libpam-runtime/override boolean false
+# /boot/grub/device.map has been regenerated
+grub-pc        grub2/device_map_regenerated    note    
+# Services to restart for PAM library upgrade:
+libpam0g       libpam0g/restart-services       string  
+# Fully qualified hostname:
+ssmtp  ssmtp/hostname  string  testkvm0.hcoop.net
+# Time zone:
+# Choices: Aden, Almaty, Amman, Anadyr, Aqtau, Aqtobe, Ashgabat, Baghdad, Bahrain, Baku, Bangkok, Beirut, Bishkek, Brunei, Choibalsan, Chongqing, Colombo, Damascus, Dhaka, Dili, Dubai, Dushanbe, Gaza, Harbin, Hebron, Ho_Chi_Minh, Hong_Kong, Hovd, Irkutsk, Istanbul, Jakarta, Jayapura, Jerusalem, Kabul, Kamchatka, Karachi, Kashgar, Kathmandu, Kolkata, Krasnoyarsk, Kuala_Lumpur, Kuching, Kuwait, Macau, Magadan, Makassar, Manila, Muscat, Nicosia, Novokuznetsk, Novosibirsk, Omsk, Oral, Phnom_Penh, Pontianak, Pyongyang, Qatar, Qyzylorda, Rangoon, Riyadh, Riyadh87, Riyadh88, Riyadh89, Sakhalin, Samarkand, Seoul, Shanghai, Singapore, Taipei, Tashkent, Tbilisi, Tehran, Tel_Aviv, Thimphu, Tokyo, Ujung_Pandang, Ulaanbaatar, Urumqi, Vientiane, Vladivostok, Yakutsk, Yekaterinburg, Yerevan
+tzdata tzdata/Zones/Asia       select  
+# PAM profiles to enable:
+# Choices: Kerberos authentication, Unix authentication, AFS session management
+libpam-runtime libpam-runtime/profiles multiselect     krb5, unix, afs-session
+# Character set to support:
+# Choices: . Arabic, # Armenian, # Cyrillic - KOI8-R and KOI8-U, # Cyrillic - non-Slavic languages, # Cyrillic - Slavic languages (also Bosnian and Serbian Latin), . Ethiopic, # Georgian, # Greek, # Hebrew, # Lao, # Latin1 and Latin5 - western Europe and Turkic languages, # Latin2 - central Europe and Romanian, # Latin3 and Latin8 - Chichewa; Esperanto; Irish; Maltese and Welsh, # Latin7 - Lithuanian; Latvian; Maori and Marshallese, . Latin - Vietnamese, # Thai, . Combined - Latin; Slavic Cyrillic; Hebrew; basic Arabic, . Combined - Latin; Slavic Cyrillic; Greek, . Combined - Latin; Slavic and non-Slavic Cyrillic
+console-setup  console-setup/codeset47 select  # Latin1 and Latin5 - western Europe and Turkic languages
+# Interface to use:
+# Choices: Dialog, Readline, Gnome, Kde, Editor, Noninteractive
+debconf        debconf/frontend        select  Dialog
+# Certificates to activate:
+# Choices: brasil.gov.br/brasil.gov.br.crt, cacert.org/cacert.org.crt, debconf.org/ca.crt, gouv.fr/cert_igca_dsa.crt, gouv.fr/cert_igca_rsa.crt, mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt, mozilla/AddTrust_External_Root.crt, mozilla/AddTrust_Low-Value_Services_Root.crt, mozilla/AddTrust_Public_Services_Root.crt, mozilla/AddTrust_Qualified_Certificates_Root.crt, mozilla/America_Online_Root_Certification_Authority_1.crt, mozilla/America_Online_Root_Certification_Authority_2.crt, mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt, mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt, mozilla/Baltimore_CyberTrust_Root.crt, mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt, mozilla/beTRUSTed_Root_CA.crt, mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt, mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt, mozilla/Camerfirma_Chambers_of_Commerce_Root.crt, mozilla/Camerfirma_Global_Chambersign_Root.crt, mozilla/Certplus_Class_2_Primary_CA.crt, mozilla/Certum_Root_CA.crt, mozilla/Comodo_AAA_Services_root.crt, mozilla/COMODO_Certification_Authority.crt, mozilla/COMODO_ECC_Certification_Authority.crt, mozilla/Comodo_Secure_Services_root.crt, mozilla/Comodo_Trusted_Services_root.crt, mozilla/DigiCert_Assured_ID_Root_CA.crt, mozilla/DigiCert_Global_Root_CA.crt, mozilla/DigiCert_High_Assurance_EV_Root_CA.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt, mozilla/DST_ACES_CA_X6.crt, mozilla/DST_Root_CA_X3.crt, mozilla/Entrust.net_Global_Secure_Personal_CA.crt, mozilla/Entrust.net_Global_Secure_Server_CA.crt, mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt, mozilla/Entrust.net_Secure_Personal_CA.crt, mozilla/Entrust.net_Secure_Server_CA.crt, mozilla/Entrust_Root_Certification_Authority.crt, mozilla/Equifax_Secure_CA.crt, mozilla/Equifax_Secure_eBusiness_CA_1.crt, mozilla/Equifax_Secure_eBusiness_CA_2.crt, mozilla/Equifax_Secure_Global_eBusiness_CA.crt, mozilla/Firmaprofesional_Root_CA.crt, mozilla/GeoTrust_Global_CA_2.crt, mozilla/GeoTrust_Global_CA.crt, mozilla/GeoTrust_Primary_Certification_Authority.crt, mozilla/GeoTrust_Universal_CA_2.crt, mozilla/GeoTrust_Universal_CA.crt, mozilla/GlobalSign_Root_CA.crt, mozilla/GlobalSign_Root_CA_-_R2.crt, mozilla/Go_Daddy_Class_2_CA.crt, mozilla/GTE_CyberTrust_Global_Root.crt, mozilla/GTE_CyberTrust_Root_CA.crt, mozilla/IPS_Chained_CAs_root.crt, mozilla/IPS_CLASE1_root.crt, mozilla/IPS_CLASE3_root.crt, mozilla/IPS_CLASEA1_root.crt, mozilla/IPS_CLASEA3_root.crt, mozilla/IPS_Servidores_root.crt, mozilla/IPS_Timestamping_root.crt, mozilla/NetLock_Business_=Class_B=_Root.crt, mozilla/NetLock_Express_=Class_C=_Root.crt, mozilla/NetLock_Notary_=Class_A=_Root.crt, mozilla/NetLock_Qualified_=Class_QA=_Root.crt, mozilla/Network_Solutions_Certificate_Authority.crt, mozilla/QuoVadis_Root_CA_2.crt, mozilla/QuoVadis_Root_CA_3.crt, mozilla/QuoVadis_Root_CA.crt, mozilla/RSA_Root_Certificate_1.crt, mozilla/RSA_Security_1024_v3.crt, mozilla/RSA_Security_2048_v3.crt, mozilla/Secure_Global_CA.crt, mozilla/SecureTrust_CA.crt, mozilla/Security_Communication_Root_CA.crt, mozilla/Sonera_Class_1_Root_CA.crt, mozilla/Sonera_Class_2_Root_CA.crt, mozilla/Staat_der_Nederlanden_Root_CA.crt, mozilla/Starfield_Class_2_CA.crt, mozilla/StartCom_Certification_Authority.crt, mozilla/StartCom_Ltd..crt, mozilla/Swisscom_Root_CA_1.crt, mozilla/SwissSign_Gold_CA_-_G2.crt, mozilla/SwissSign_Platinum_CA_-_G2.crt, mozilla/SwissSign_Silver_CA_-_G2.crt, mozilla/Taiwan_GRCA.crt, mozilla/TC_TrustCenter__Germany__Class_2_CA.crt, mozilla/TC_TrustCenter__Germany__Class_3_CA.crt, mozilla/TDC_Internet_Root_CA.crt, mozilla/TDC_OCES_Root_CA.crt, mozilla/Thawte_Personal_Basic_CA.crt, mozilla/Thawte_Personal_Freemail_CA.crt, mozilla/Thawte_Personal_Premium_CA.crt, mozilla/Thawte_Premium_Server_CA.crt, mozilla/thawte_Primary_Root_CA.crt, mozilla/Thawte_Server_CA.crt, mozilla/Thawte_Time_Stamping_CA.crt, mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt, mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt, mozilla/UTN_DATACorp_SGC_Root_CA.crt, mozilla/UTN_USERFirst_Email_Root_CA.crt, mozilla/UTN_USERFirst_Hardware_Root_CA.crt, mozilla/UTN-USER_First-Network_Applications.crt, mozilla/ValiCert_Class_1_VA.crt, mozilla/ValiCert_Class_2_VA.crt, mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt, mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt, mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt, mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt, mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt, mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt, mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt, mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt, mozilla/Verisign_RSA_Secure_Server_CA.crt, mozilla/Verisign_Time_Stamping_Authority_CA.crt, mozilla/Visa_eCommerce_Root.crt, mozilla/Visa_International_Global_Root_2.crt, mozilla/Wells_Fargo_Root_CA.crt, mozilla/WellsSecure_Public_Root_Certificate_Authority.crt, mozilla/XRamp_Global_CA_Root.crt, signet.pl/signet_ca1_pem.crt, signet.pl/signet_ca2_pem.crt, signet.pl/signet_ca3_pem.crt, signet.pl/signet_ocspklasa2_pem.crt, signet.pl/signet_ocspklasa3_pem.crt, signet.pl/signet_pca2_pem.crt, signet.pl/signet_pca3_pem.crt, signet.pl/signet_rootca_pem.crt, signet.pl/signet_tsa1_pem.crt, spi-inc.org/spi-ca-2003.crt, spi-inc.org/spi-cacert-2008.crt, telesec.de/deutsche-telekom-root-ca-2.crt
+ca-certificates        ca-certificates/enable_crts     multiselect     brasil.gov.br/brasil.gov.br.crt, cacert.org/cacert.org.crt, debconf.org/ca.crt, gouv.fr/cert_igca_dsa.crt, gouv.fr/cert_igca_rsa.crt, mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt, mozilla/AddTrust_External_Root.crt, mozilla/AddTrust_Low-Value_Services_Root.crt, mozilla/AddTrust_Public_Services_Root.crt, mozilla/AddTrust_Qualified_Certificates_Root.crt, mozilla/America_Online_Root_Certification_Authority_1.crt, mozilla/America_Online_Root_Certification_Authority_2.crt, mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt, mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt, mozilla/Baltimore_CyberTrust_Root.crt, mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt, mozilla/beTRUSTed_Root_CA.crt, mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt, mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt, mozilla/Camerfirma_Chambers_of_Commerce_Root.crt, mozilla/Camerfirma_Global_Chambersign_Root.crt, mozilla/Certplus_Class_2_Primary_CA.crt, mozilla/Certum_Root_CA.crt, mozilla/Comodo_AAA_Services_root.crt, mozilla/COMODO_Certification_Authority.crt, mozilla/COMODO_ECC_Certification_Authority.crt, mozilla/Comodo_Secure_Services_root.crt, mozilla/Comodo_Trusted_Services_root.crt, mozilla/DigiCert_Assured_ID_Root_CA.crt, mozilla/DigiCert_Global_Root_CA.crt, mozilla/DigiCert_High_Assurance_EV_Root_CA.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt, mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt, mozilla/DST_ACES_CA_X6.crt, mozilla/DST_Root_CA_X3.crt, mozilla/Entrust.net_Global_Secure_Personal_CA.crt, mozilla/Entrust.net_Global_Secure_Server_CA.crt, mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt, mozilla/Entrust.net_Secure_Personal_CA.crt, mozilla/Entrust.net_Secure_Server_CA.crt, mozilla/Entrust_Root_Certification_Authority.crt, mozilla/Equifax_Secure_CA.crt, mozilla/Equifax_Secure_eBusiness_CA_1.crt, mozilla/Equifax_Secure_eBusiness_CA_2.crt, mozilla/Equifax_Secure_Global_eBusiness_CA.crt, mozilla/Firmaprofesional_Root_CA.crt, mozilla/GeoTrust_Global_CA_2.crt, mozilla/GeoTrust_Global_CA.crt, mozilla/GeoTrust_Primary_Certification_Authority.crt, mozilla/GeoTrust_Universal_CA_2.crt, mozilla/GeoTrust_Universal_CA.crt, mozilla/GlobalSign_Root_CA.crt, mozilla/GlobalSign_Root_CA_-_R2.crt, mozilla/Go_Daddy_Class_2_CA.crt, mozilla/GTE_CyberTrust_Global_Root.crt, mozilla/GTE_CyberTrust_Root_CA.crt, mozilla/IPS_Chained_CAs_root.crt, mozilla/IPS_CLASE1_root.crt, mozilla/IPS_CLASE3_root.crt, mozilla/IPS_CLASEA1_root.crt, mozilla/IPS_CLASEA3_root.crt, mozilla/IPS_Servidores_root.crt, mozilla/IPS_Timestamping_root.crt, mozilla/NetLock_Business_=Class_B=_Root.crt, mozilla/NetLock_Express_=Class_C=_Root.crt, mozilla/NetLock_Notary_=Class_A=_Root.crt, mozilla/NetLock_Qualified_=Class_QA=_Root.crt, mozilla/Network_Solutions_Certificate_Authority.crt, mozilla/QuoVadis_Root_CA_2.crt, mozilla/QuoVadis_Root_CA_3.crt, mozilla/QuoVadis_Root_CA.crt, mozilla/RSA_Root_Certificate_1.crt, mozilla/RSA_Security_1024_v3.crt, mozilla/RSA_Security_2048_v3.crt, mozilla/Secure_Global_CA.crt, mozilla/SecureTrust_CA.crt, mozilla/Security_Communication_Root_CA.crt, mozilla/Sonera_Class_1_Root_CA.crt, mozilla/Sonera_Class_2_Root_CA.crt, mozilla/Staat_der_Nederlanden_Root_CA.crt, mozilla/Starfield_Class_2_CA.crt, mozilla/StartCom_Certification_Authority.crt, mozilla/StartCom_Ltd..crt, mozilla/Swisscom_Root_CA_1.crt, mozilla/SwissSign_Gold_CA_-_G2.crt, mozilla/SwissSign_Platinum_CA_-_G2.crt, mozilla/SwissSign_Silver_CA_-_G2.crt, mozilla/Taiwan_GRCA.crt, mozilla/TC_TrustCenter__Germany__Class_2_CA.crt, mozilla/TC_TrustCenter__Germany__Class_3_CA.crt, mozilla/TDC_Internet_Root_CA.crt, mozilla/TDC_OCES_Root_CA.crt, mozilla/Thawte_Personal_Basic_CA.crt, mozilla/Thawte_Personal_Freemail_CA.crt, mozilla/Thawte_Personal_Premium_CA.crt, mozilla/Thawte_Premium_Server_CA.crt, mozilla/thawte_Primary_Root_CA.crt, mozilla/Thawte_Server_CA.crt, mozilla/Thawte_Time_Stamping_CA.crt, mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt, mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt, mozilla/UTN_DATACorp_SGC_Root_CA.crt, mozilla/UTN_USERFirst_Email_Root_CA.crt, mozilla/UTN_USERFirst_Hardware_Root_CA.crt, mozilla/UTN-USER_First-Network_Applications.crt, mozilla/ValiCert_Class_1_VA.crt, mozilla/ValiCert_Class_2_VA.crt, mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt, mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt, mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt, mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt, mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt, mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt, mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt, mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt, mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt, mozilla/Verisign_RSA_Secure_Server_CA.crt, mozilla/Verisign_Time_Stamping_Authority_CA.crt, mozilla/Visa_eCommerce_Root.crt, mozilla/Visa_International_Global_Root_2.crt, mozilla/Wells_Fargo_Root_CA.crt, mozilla/WellsSecure_Public_Root_Certificate_Authority.crt, mozilla/XRamp_Global_CA_Root.crt, signet.pl/signet_ca1_pem.crt, signet.pl/signet_ca2_pem.crt, signet.pl/signet_ca3_pem.crt, signet.pl/signet_ocspklasa2_pem.crt, signet.pl/signet_ocspklasa3_pem.crt, signet.pl/signet_pca2_pem.crt, signet.pl/signet_pca3_pem.crt, signet.pl/signet_rootca_pem.crt, signet.pl/signet_tsa1_pem.crt, spi-inc.org/spi-ca-2003.crt, spi-inc.org/spi-cacert-2008.crt, telesec.de/deutsche-telekom-root-ca-2.crt
+# Unable to migrate to dependency-based boot system
+sysv-rc        sysv-rc/unable-to-convert       note    
+# Choose software to install:
+# Choices: Graphical desktop environment, Web server, Print server, DNS server, File server, Mail server, SQL database, SSH server, Laptop, Standard system utilities
+tasksel        tasksel/first   multiselect     SSH server, Standard system utilities
+# Time zone:
+# Choices: GMT, GMT+0, GMT+1, GMT+10, GMT+11, GMT+12, GMT+2, GMT+3, GMT+4, GMT+5, GMT+6, GMT+7, GMT+8, GMT+9, GMT-0, GMT-1, GMT-10, GMT-11, GMT-12, GMT-13, GMT-14, GMT-2, GMT-3, GMT-4, GMT-5, GMT-6, GMT-7, GMT-8, GMT-9, GMT0, Greenwich, UCT, UTC, Universal, Zulu
+tzdata tzdata/Zones/Etc        select  UTC
+# Services to restart to make them use the new libraries:
+libssl0.9.8    libssl0.9.8/restart-services    string  
+# Other destinations for which mail is accepted:
+exim4-config   exim4/dc_other_hostnames        string  testkvm0.hcoop.net
+# New certificates to activate:
+# Choices: 
+ca-certificates        ca-certificates/new_crts        multiselect     
+# General type of mail configuration:
+# Choices: internet site; mail is sent and received directly using SMTP, mail sent by smarthost; received via SMTP or fetchmail, mail sent by smarthost; no local mail, local delivery only; not on a network, no configuration at this time
+exim4-config   exim4/dc_eximconfig_configtype  select  local delivery only; not on a network
+# Migrate legacy boot sequencing to dependency-based sequencing?
+sysv-rc        sysv-rc/convert-legacy  boolean true
+# Time zone:
+# Choices: AST4, AST4ADT, CST6, CST6CDT, EST5, EST5EDT, HST10, MST7, MST7MDT, PST8, PST8PDT, YST9, YST9YDT
+tzdata tzdata/Zones/SystemV    select  
+# Do you want to risk killing active SSH sessions?
+openssh-server ssh/use_old_init_script boolean true
+# for internal use
+keyboard-configuration keyboard-configuration/modelcode        string  pc105
+# Run Openafs client now and at boot?
+openafs-client openafs-client/run-client       boolean true
+# Conflicts found in three-way merge
+ucf    ucf/conflicts_found     error   
+# Your system allowed access without a password!
+libpam-runtime libpam-runtime/you-had-no-auth  error   
+# for internal use
+krb5-config    krb5-config/add_servers_realm   string  HCOOP.NET
+# Keep current keyboard options in the configuration file?
+keyboard-configuration keyboard-configuration/unsupported_config_options       boolean true
+# GRUB install devices:
+# Choices: /dev/sda (32212 MB; QEMU_HARDDISK), - /dev/sda7 (24109 MB; /)
+grub-pc        grub-pc/install_devices multiselect     /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001
+# Automatically update rkhunter's file properties database?
+rkhunter       rkhunter/apt_autogen    boolean true
+# Font for the console:
+# Choices: Fixed, Terminus, TerminusBold, TerminusBoldVGA, VGA, Do not change the boot/kernel font
+console-setup  console-setup/fontface47        select  Fixed
+# For internal use only
+krb5-config    krb5-config/read_conf   boolean true
+# Vulnerable host keys will be regenerated
+openssh-server ssh/vulnerable_host_keys        note    
+# Dynamically generate the contents of /afs?
+openafs-client openafs-client/dynroot  boolean true
+# Keep the current keyboard layout in the configuration file?
+keyboard-configuration keyboard-configuration/unsupported_config_layout        boolean true
+# Method to be used to display changes:
+# Choices: pager, browser, xterm-pager, xterm-browser, gtk, text, mail, none
+apt-listchanges        apt-listchanges/frontend        select  pager
+# Method for toggling between national and Latin mode:
+# Choices: Caps Lock, Right Alt (AltGr), Right Control, Right Shift, Right Logo key, Menu key, Alt+Shift, Control+Shift, Control+Alt, Alt+Caps Lock, Left Control+Left Shift, Left Alt, Left Control, Left Shift, Left Logo key, Scroll Lock key, No toggling
+keyboard-configuration keyboard-configuration/toggle   select  No toggling
+# Remove GRUB 2 from /boot/grub?
+grub-pc        grub-pc/postrm_purge_boot_grub  boolean false
+# Font size:
+# Choices: 13, 14, 15, 16, 18
+console-setup  console-setup/fontsize-text47   select  16
+# Really leave the mail system unconfigured?
+exim4-config   exim4/no_config boolean true
+# Encrypt authenticated traffic with AFS fileserver?
+openafs-client openafs-client/crypt    boolean true
+# Username who gets mail for userids < 1000:
+ssmtp  ssmtp/root      string  postmaster
+# AFS cell this workstation belongs to:
+openafs-client openafs-client/thiscell string  hcoop.net
+# Compose key:
+# Choices: No compose key, Right Alt (AltGr), Right Control, Right Logo key, Menu key, Left Logo key, Caps Lock
+keyboard-configuration keyboard-configuration/compose  select  No compose key
+# Country of origin for the keyboard:
+# Choices: 
+keyboard-configuration keyboard-configuration/layout   select  
+# Time zone:
+# Choices: Longyearbyen
+tzdata tzdata/Zones/Arctic     select  
+# Failed to update disk device IDs
+linux-base     linux-base/disk-id-update-failed        error   
+# Keymap to use:
+# Choices: American English, Belarusian, Belgian, Brazilian (ABNT2 layout), Brazilian (EUA layout), British English, Bulgarian, Bulgarian (phonetic layout), Canadian French, Canadian Multilingual, Croatian, Czech, Danish, Dutch, Dvorak, Estonian, Finnish, French, German, Greek, Hebrew, Hungarian, Icelandic, Italian, Japanese, Kirghiz, Latin American, Latvian, Lithuanian, Macedonian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian (Cyrillic), Slovakian, Slovene, Spanish, Swedish, Swiss French, Swiss German, Thai, Turkish (F layout), Turkish (Q layout), Ukrainian
+keyboard-configuration keyboard-configuration/xkb-keymap       select  us
+# Keyboard layout:
+# Choices: USA, USA - Alternative international (former us_intl), USA - Cherokee, USA - Classic Dvorak, USA - Colemak, USA - Dvorak, USA - Dvorak international, USA - Group toggle on multiply/divide key, USA - International (AltGr dead keys), USA - International (with dead keys), USA - Left handed Dvorak, USA - Macintosh, USA - Programmer Dvorak, USA - Right handed Dvorak, USA - Russian phonetic, USA - With EuroSign on 5, Other
+keyboard-configuration keyboard-configuration/variant  select  USA
+# Hide local mail name in outgoing mail?
+exim4-config   exim4/hide_mailname     boolean 
+# Choose software to install:
+# Choices: 
+tasksel        tasksel/tasks   multiselect     
+# Time zone:
+# Choices: Apia, Auckland, Chatham, Chuuk, Easter, Efate, Enderbury, Fakaofo, Fiji, Funafuti, Galapagos, Gambier, Guadalcanal, Guam, Honolulu, Johnston, Kiritimati, Kosrae, Kwajalein, Majuro, Marquesas, Midway, Nauru, Niue, Norfolk, Noumea, Pago_Pago, Palau, Pitcairn, Pohnpei, Ponape, Port_Moresby, Rarotonga, Saipan, Samoa, Tahiti, Tarawa, Tongatapu, Truk, Wake, Wallis, Yap
+tzdata tzdata/Zones/Pacific    select  
+# Method for temporarily toggling between national and Latin input:
+# Choices: No temporary switch, Both Logo keys, Right Alt (AltGr), Right Logo key, Left Alt, Left Logo key
+keyboard-configuration keyboard-configuration/switch   select  No temporary switch
+# Writing GRUB to boot device failed - try again?
+grub-pc        grub-pc/install_devices_failed_upgrade  boolean true
+# Encoding to use on the console:
+# Choices: ARMSCII-8, CP1251, CP1255, CP1256, GEORGIAN-ACADEMY, GEORGIAN-PS, IBM1133, ISIRI-3342, ISO-8859-1, ISO-8859-10, ISO-8859-11, ISO-8859-13, ISO-8859-14, ISO-8859-15, ISO-8859-16, ISO-8859-2, ISO-8859-3, ISO-8859-4, ISO-8859-5, ISO-8859-6, ISO-8859-7, ISO-8859-8, ISO-8859-9, KOI8-R, KOI8-U, TIS-620, UTF-8, VISCII
+console-setup  console-setup/charmap47 select  UTF-8
+# Root and postmaster mail recipient:
+exim4-config   exim4/dc_postmaster     string  root0
+# Kerberos servers for your realm:
+krb5-config    krb5-config/kerberos_servers    string  
+# IP address or host name of the outgoing smarthost:
+exim4-config   exim4/dc_smarthost      string  
+# Username for your account:
+user-setup-udeb        passwd/username string  root0
+# New host key mandatory
+openssh-server ssh/encrypted_host_key_but_no_keygen    note    
+# Packages to install:
+# Choices: 
+discover       discover/install_hw_packages    multiselect     
+# Proceed with the udev upgrade despite the kernel incompatibility?
+udev   udev/new_kernel_needed  boolean false
+# Domains to relay mail for:
+exim4-config   exim4/dc_relay_domains  string  
+# Time zone:
+# Choices: Casey, Davis, DumontDUrville, Macquarie, Mawson, McMurdo, Palmer, Rothera, Syowa, Vostok
+tzdata tzdata/Zones/Antarctica select  
+# Prompt for confirmation after displaying changes?
+apt-listchanges        apt-listchanges/confirm boolean false
+# Keep default keyboard options ()?
+keyboard-configuration keyboard-configuration/unsupported_options      boolean true
+# Do you want to upgrade glibc now?
+libc6  glibc/upgrade   boolean true
+# Linux command line:
+grub-pc        grub2/linux_cmdline     string  
+# Default Kerberos version 5 realm:
+krb5-config    krb5-config/default_realm       string  HCOOP.NET
+# Ignore questions with a priority less than:
+# Choices: critical, high, medium, low
+debconf        debconf/priority        select  low
+# for internal use; can be preseeded
+man-db man-db/auto-update      boolean true
+# Key to function as AltGr:
+# Choices: The default for the keyboard layout, No AltGr key, Right Alt (AltGr), Right Control, Right Logo key, Menu key, Left Alt, Left Logo key, Keypad Enter key, Both Logo keys, Both Alt keys
+keyboard-configuration keyboard-configuration/altgr    select  The default for the keyboard layout
+# Continue without installing GRUB?
+grub-pc        grub-pc/install_devices_empty   boolean false
+# Changes displayed with APT:
+# Choices: news, changelogs, both
+apt-listchanges        apt-listchanges/which   select  news
+# Incompatible PAM profiles selected.
+libpam-runtime libpam-runtime/conflicts        error   
+# Default locale for the system environment:
+# Choices: None, en_US.UTF-8
+locales        locales/default_environment_locale      select  None
+# Time zone:
+# Choices: Amsterdam, Andorra, Athens, Belfast, Belgrade, Berlin, Bratislava, Brussels, Bucharest, Budapest, Chisinau, Copenhagen, Dublin, Gibraltar, Guernsey, Helsinki, Isle of Man, Istanbul, Jersey, Kaliningrad, Kiev, Lisbon, Ljubljana, London, Luxembourg, Madrid, Malta, Mariehamn, Minsk, Monaco, Moscow, Nicosia, Oslo, Paris, Podgorica, Prague, Riga, Rome, Samara, San Marino, Sarajevo, Simferopol, Skopje, Sofia, Stockholm, Tallinn, Tirane, Tiraspol, Uzhgorod, Vaduz, Vatican, Vienna, Vilnius, Volgograd, Warsaw, Zagreb, Zaporozhye, Zurich
+tzdata tzdata/Zones/Europe     select  
+# Boot loader configuration must be updated
+linux-image-2.6.32-5-amd64     linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64       error   
+# Machines to relay mail for:
+exim4-config   exim4/dc_relay_nets     string  
+# Domain to masquerade as:
+ssmtp  ssmtp/rewritedomain     string  hcoop.net
+# Remove undelivered messages in spool directory?
+exim4-base     exim4/purge_spool       boolean false
+# Configuration files still contain deprecated device names
+linux-base     linux-base/disk-id-manual       error   
+# System mail name:
+exim4-config   exim4/mailname  string  testkvm0.hcoop.net
+# Dummy template
+d-i    debian-installer/keymap string  us
+# Apply configuration changes to disk device IDs?
+linux-base     linux-base/disk-id-convert-plan-no-relabel      boolean true
+# Boot loader configuration check needed
+linux-base     linux-base/disk-id-manual-boot-loader   error   
+# Use Control+Alt+Backspace to terminate the X server?
+keyboard-configuration keyboard-configuration/ctrl_alt_bksp    boolean false
+# Visible domain name for local users:
+exim4-config   exim4/dc_readhost       string  
+# Automatically overwrite config files?
+ssmtp  ssmtp/overwriteconfig   boolean true
+# Services to restart for GNU libc library upgrade:
+libc6  glibc/restart-services  string  
+# Reconfigure exim4-config instead of this package
+exim4  exim4/drec      error   
+# kFreeBSD default command line:
+grub-pc        grub2/kfreebsd_cmdline_default  string  quiet
+# Reconfigure exim4-config instead of this package
+exim4-base     exim4-base/drec error   
+# Commit failed
+etckeeper      etckeeper/commit_failed error   
+# Split configuration into small files?
+exim4-config   exim4/use_split_config  boolean false
+# for internal use
+console-setup  console-setup/codesetcode       string  Lat15
+# Name to store in /etc/mailname:
+ssmtp  ssmtp/mailname  string  
+# xscreensaver and xlockmore must be restarted before upgrading
+libc6  glibc/disable-screensaver       error   
+# Update disk device IDs in system configuration?
+linux-base     linux-base/disk-id-convert-auto boolean true
+# Time zone:
+# Choices: Abidjan, Accra, Addis_Ababa, Algiers, Asmara, Bamako, Bangui, Banjul, Bissau, Blantyre, Brazzaville, Bujumbura, Cairo, Casablanca, Ceuta, Conakry, Dakar, Dar_es_Salaam, Djibouti, Douala, El_Aaiun, Freetown, Gaborone, Harare, Johannesburg, Juba, Kampala, Khartoum, Kigali, Kinshasa, Lagos, Libreville, Lome, Luanda, Lubumbashi, Lusaka, Malabo, Maputo, Maseru, Mbabane, Mogadishu, Monrovia, Nairobi, Ndjamena, Niamey, Nouakchott, Ouagadougou, Porto-Novo, Sao_Tome, Timbuktu, Tripoli, Tunis, Windhoek
+tzdata tzdata/Zones/Africa     select  
+# for internal use only
+d-i    debian-installer/language       string  en
+# Remove etckeeper  repository and associated files?
+etckeeper      etckeeper/purge boolean true
+# Should portmap be bound to the loopback address?
+portmap        portmap/loopback        boolean false
+# Delivery method for local mail:
+# Choices: mbox format in /var/mail/, Maildir format in home directory
+exim4-config   exim4/dc_localdelivery  select  mbox format in /var/mail/
+# E-mail address(es) which will receive changes:
+apt-listchanges        apt-listchanges/email-address   string  root
+# Writing GRUB to boot device failed - continue?
+grub-pc        grub-pc/install_devices_failed  boolean false
+# Keep default keyboard layout ()?
+keyboard-configuration keyboard-configuration/unsupported_layout       boolean true
+# Boot loader may need to be upgraded
+linux-base     linux-base/do-bootloader-default-changed        error   
+# Time zone:
+# Choices: Adak, Anchorage, Anguilla, Antigua, Araguaina, Argentina/Buenos_Aires, Argentina/Catamarca, Argentina/Cordoba, Argentina/Jujuy, Argentina/La_Rioja, Argentina/Mendoza, Argentina/Rio_Gallegos, Argentina/Salta, Argentina/San_Juan, Argentina/San_Luis, Argentina/Tucuman, Argentina/Ushuaia, Aruba, Asuncion, Atikokan, Atka, Bahia, Bahia_Banderas, Barbados, Belem, Belize, Blanc-Sablon, Boa_Vista, Bogota, Boise, Cambridge_Bay, Campo_Grande, Cancun, Caracas, Cayenne, Cayman, Chicago, Chihuahua, Coral_Harbour, Costa_Rica, Cuiaba, Curacao, Danmarkshavn, Dawson, Dawson_Creek, Denver, Detroit, Dominica, Edmonton, Eirunepe, El_Salvador, Ensenada, Fortaleza, Glace_Bay, Godthab, Goose_Bay, Grand_Turk, Grenada, Guadeloupe, Guatemala, Guayaquil, Guyana, Halifax, Havana, Hermosillo, Indiana/Indianapolis, Indiana/Knox, Indiana/Marengo, Indiana/Petersburg, Indiana/Tell_City, Indiana/Vevay, Indiana/Vincennes, Indiana/Winamac, Inuvik, Iqaluit, Jamaica, Juneau, Kentucky/Louisville, Kentucky/Monticello, Kralendijk, La_Paz, Lima, Los_Angeles, Lower_Princes, Maceio, Managua, Manaus, Marigot, Martinique, Matamoros, Mazatlan, Menominee, Merida, Metlakatla, Mexico_City, Miquelon, Moncton, Monterrey, Montevideo, Montreal, Montserrat, Nassau, New_York, Nipigon, Nome, Noronha, North_Dakota/Beulah, North_Dakota/Center, North_Dakota/New_Salem, Ojinaga, Panama, Pangnirtung, Paramaribo, Phoenix, Port-au-Prince, Port_of_Spain, Porto_Acre, Porto_Velho, Puerto_Rico, Rainy_River, Rankin_Inlet, Recife, Regina, Resolute, Rio_Branco, Santa_Isabel, Santarem, Santiago, Santo_Domingo, Sao_Paulo, Scoresbysund, Shiprock, Sitka, St_Barthelemy, St_Johns, St_Kitts, St_Lucia, St_Thomas, St_Vincent, Swift_Current, Tegucigalpa, Thule, Thunder_Bay, Tijuana, Toronto, Tortola, Vancouver, Virgin, Whitehorse, Winnipeg, Yakutat, Yellowknife
+tzdata tzdata/Zones/America    select  
+# for internal use
+keyboard-configuration keyboard-configuration/variantcode      string  
+# Abort installation after depmod error?
+linux-image-2.6.32-5-amd64     linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64  boolean false
+# Trust new certificates from certificate authorities?
+# Choices: yes, no, ask
+ca-certificates        ca-certificates/trust_new_crts  select  yes
+# Failure restarting some services for OpenSSL upgrade
+libssl0.9.8    libssl0.9.8/restart-failed      error   
+# Locales to be generated:
+# Choices: All locales, aa_DJ ISO-8859-1, aa_DJ.UTF-8 UTF-8, aa_ER UTF-8, aa_ER@saaho UTF-8, aa_ET UTF-8, af_ZA ISO-8859-1, af_ZA.UTF-8 UTF-8, am_ET UTF-8, an_ES ISO-8859-15, an_ES.UTF-8 UTF-8, ar_AE ISO-8859-6, ar_AE.UTF-8 UTF-8, ar_BH ISO-8859-6, ar_BH.UTF-8 UTF-8, ar_DZ ISO-8859-6, ar_DZ.UTF-8 UTF-8, ar_EG ISO-8859-6, ar_EG.UTF-8 UTF-8, ar_IN UTF-8, ar_IQ ISO-8859-6, ar_IQ.UTF-8 UTF-8, ar_JO ISO-8859-6, ar_JO.UTF-8 UTF-8, ar_KW ISO-8859-6, ar_KW.UTF-8 UTF-8, ar_LB ISO-8859-6, ar_LB.UTF-8 UTF-8, ar_LY ISO-8859-6, ar_LY.UTF-8 UTF-8, ar_MA ISO-8859-6, ar_MA.UTF-8 UTF-8, ar_OM ISO-8859-6, ar_OM.UTF-8 UTF-8, ar_QA ISO-8859-6, ar_QA.UTF-8 UTF-8, ar_SA ISO-8859-6, ar_SA.UTF-8 UTF-8, ar_SD ISO-8859-6, ar_SD.UTF-8 UTF-8, ar_SY ISO-8859-6, ar_SY.UTF-8 UTF-8, ar_TN ISO-8859-6, ar_TN.UTF-8 UTF-8, ar_YE ISO-8859-6, ar_YE.UTF-8 UTF-8, as_IN.UTF-8 UTF-8, ast_ES ISO-8859-15, ast_ES.UTF-8 UTF-8, az_AZ.UTF-8 UTF-8, be_BY CP1251, be_BY.UTF-8 UTF-8, be_BY@latin UTF-8, ber_DZ UTF-8, ber_MA UTF-8, bg_BG CP1251, bg_BG.UTF-8 UTF-8, bn_BD UTF-8, bn_IN UTF-8, bo_CN UTF-8, bo_IN UTF-8, br_FR ISO-8859-1, br_FR.UTF-8 UTF-8, br_FR@euro ISO-8859-15, bs_BA ISO-8859-2, bs_BA.UTF-8 UTF-8, byn_ER UTF-8, ca_AD ISO-8859-15, ca_AD.UTF-8 UTF-8, ca_ES ISO-8859-1, ca_ES.UTF-8 UTF-8, ca_ES.UTF-8@valencia UTF-8, ca_ES@euro ISO-8859-15, ca_ES@valencia ISO-8859-15, ca_FR ISO-8859-15, ca_FR.UTF-8 UTF-8, ca_IT ISO-8859-15, ca_IT.UTF-8 UTF-8, crh_UA UTF-8, cs_CZ ISO-8859-2, cs_CZ.UTF-8 UTF-8, csb_PL UTF-8, cy_GB ISO-8859-14, cy_GB.UTF-8 UTF-8, da_DK ISO-8859-1, da_DK.UTF-8 UTF-8, de_AT ISO-8859-1, de_AT.UTF-8 UTF-8, de_AT@euro ISO-8859-15, de_BE ISO-8859-1, de_BE.UTF-8 UTF-8, de_BE@euro ISO-8859-15, de_CH ISO-8859-1, de_CH.UTF-8 UTF-8, de_DE ISO-8859-1, de_DE.UTF-8 UTF-8, de_DE@euro ISO-8859-15, de_LI.UTF-8 UTF-8, de_LU ISO-8859-1, de_LU.UTF-8 UTF-8, de_LU@euro ISO-8859-15, dv_MV UTF-8, dz_BT UTF-8, el_CY ISO-8859-7, el_CY.UTF-8 UTF-8, el_GR ISO-8859-7, el_GR.UTF-8 UTF-8, en_AG UTF-8, en_AU ISO-8859-1, en_AU.UTF-8 UTF-8, en_BW ISO-8859-1, en_BW.UTF-8 UTF-8, en_CA ISO-8859-1, en_CA.UTF-8 UTF-8, en_DK ISO-8859-1, en_DK.ISO-8859-15 ISO-8859-15, en_DK.UTF-8 UTF-8, en_GB ISO-8859-1, en_GB.ISO-8859-15 ISO-8859-15, en_GB.UTF-8 UTF-8, en_HK ISO-8859-1, en_HK.UTF-8 UTF-8, en_IE ISO-8859-1, en_IE.UTF-8 UTF-8, en_IE@euro ISO-8859-15, en_IN UTF-8, en_NG UTF-8, en_NZ ISO-8859-1, en_NZ.UTF-8 UTF-8, en_PH ISO-8859-1, en_PH.UTF-8 UTF-8, en_SG ISO-8859-1, en_SG.UTF-8 UTF-8, en_US ISO-8859-1, en_US.ISO-8859-15 ISO-8859-15, en_US.UTF-8 UTF-8, en_ZA ISO-8859-1, en_ZA.UTF-8 UTF-8, en_ZW ISO-8859-1, en_ZW.UTF-8 UTF-8, eo ISO-8859-3, eo.UTF-8 UTF-8, es_AR ISO-8859-1, es_AR.UTF-8 UTF-8, es_BO ISO-8859-1, es_BO.UTF-8 UTF-8, es_CL ISO-8859-1, es_CL.UTF-8 UTF-8, es_CO ISO-8859-1, es_CO.UTF-8 UTF-8, es_CR ISO-8859-1, es_CR.UTF-8 UTF-8, es_DO ISO-8859-1, es_DO.UTF-8 UTF-8, es_EC ISO-8859-1, es_EC.UTF-8 UTF-8, es_ES ISO-8859-1, es_ES.UTF-8 UTF-8, es_ES@euro ISO-8859-15, es_GT ISO-8859-1, es_GT.UTF-8 UTF-8, es_HN ISO-8859-1, es_HN.UTF-8 UTF-8, es_MX ISO-8859-1, es_MX.UTF-8 UTF-8, es_NI ISO-8859-1, es_NI.UTF-8 UTF-8, es_PA ISO-8859-1, es_PA.UTF-8 UTF-8, es_PE ISO-8859-1, es_PE.UTF-8 UTF-8, es_PR ISO-8859-1, es_PR.UTF-8 UTF-8, es_PY ISO-8859-1, es_PY.UTF-8 UTF-8, es_SV ISO-8859-1, es_SV.UTF-8 UTF-8, es_US ISO-8859-1, es_US.UTF-8 UTF-8, es_UY ISO-8859-1, es_UY.UTF-8 UTF-8, es_VE ISO-8859-1, es_VE.UTF-8 UTF-8, et_EE ISO-8859-1, et_EE.ISO-8859-15 ISO-8859-15, et_EE.UTF-8 UTF-8, eu_ES ISO-8859-1, eu_ES.UTF-8 UTF-8, eu_ES@euro ISO-8859-15, eu_FR ISO-8859-1, eu_FR.UTF-8 UTF-8, eu_FR@euro ISO-8859-15, fa_IR UTF-8, fi_FI ISO-8859-1, fi_FI.UTF-8 UTF-8, fi_FI@euro ISO-8859-15, fil_PH UTF-8, fo_FO ISO-8859-1, fo_FO.UTF-8 UTF-8, fr_BE ISO-8859-1, fr_BE.UTF-8 UTF-8, fr_BE@euro ISO-8859-15, fr_CA ISO-8859-1, fr_CA.UTF-8 UTF-8, fr_CH ISO-8859-1, fr_CH.UTF-8 UTF-8, fr_FR ISO-8859-1, fr_FR.UTF-8 UTF-8, fr_FR@euro ISO-8859-15, fr_LU ISO-8859-1, fr_LU.UTF-8 UTF-8, fr_LU@euro ISO-8859-15, fur_IT UTF-8, fy_DE UTF-8, fy_NL UTF-8, ga_IE ISO-8859-1, ga_IE.UTF-8 UTF-8, ga_IE@euro ISO-8859-15, gd_GB ISO-8859-15, gd_GB.UTF-8 UTF-8, gez_ER UTF-8, gez_ER@abegede UTF-8, gez_ET UTF-8, gez_ET@abegede UTF-8, gl_ES ISO-8859-1, gl_ES.UTF-8 UTF-8, gl_ES@euro ISO-8859-15, gu_IN UTF-8, gv_GB ISO-8859-1, gv_GB.UTF-8 UTF-8, ha_NG UTF-8, he_IL ISO-8859-8, he_IL.UTF-8 UTF-8, hi_IN UTF-8, hne_IN UTF-8, hr_HR ISO-8859-2, hr_HR.UTF-8 UTF-8, hsb_DE ISO-8859-2, hsb_DE.UTF-8 UTF-8, ht_HT UTF-8, hu_HU ISO-8859-2, hu_HU.UTF-8 UTF-8, hy_AM UTF-8, hy_AM.ARMSCII-8 ARMSCII-8, ia UTF-8, id_ID ISO-8859-1, id_ID.UTF-8 UTF-8, ig_NG UTF-8, ik_CA UTF-8, is_IS ISO-8859-1, is_IS.UTF-8 UTF-8, it_CH ISO-8859-1, it_CH.UTF-8 UTF-8, it_IT ISO-8859-1, it_IT.UTF-8 UTF-8, it_IT@euro ISO-8859-15, iu_CA UTF-8, iw_IL ISO-8859-8, iw_IL.UTF-8 UTF-8, ja_JP.EUC-JP EUC-JP, ja_JP.UTF-8 UTF-8, ka_GE GEORGIAN-PS, ka_GE.UTF-8 UTF-8, kk_KZ PT154, kk_KZ RK1048, kk_KZ.UTF-8 UTF-8, kl_GL ISO-8859-1, kl_GL.UTF-8 UTF-8, km_KH UTF-8, kn_IN UTF-8, ko_KR.EUC-KR EUC-KR, ko_KR.UTF-8 UTF-8, ks_IN UTF-8, ks_IN@devanagari UTF-8, ku_TR ISO-8859-9, ku_TR.UTF-8 UTF-8, kw_GB ISO-8859-1, kw_GB.UTF-8 UTF-8, ky_KG UTF-8, lg_UG ISO-8859-10, lg_UG.UTF-8 UTF-8, li_BE UTF-8, li_NL UTF-8, lo_LA UTF-8, lt_LT ISO-8859-13, lt_LT.UTF-8 UTF-8, lv_LV ISO-8859-13, lv_LV.UTF-8 UTF-8, mai_IN UTF-8, mg_MG ISO-8859-15, mg_MG.UTF-8 UTF-8, mi_NZ ISO-8859-13, mi_NZ.UTF-8 UTF-8, mk_MK ISO-8859-5, mk_MK.UTF-8 UTF-8, ml_IN UTF-8, mn_MN UTF-8, mr_IN UTF-8, ms_MY ISO-8859-1, ms_MY.UTF-8 UTF-8, mt_MT ISO-8859-3, mt_MT.UTF-8 UTF-8, my_MM UTF-8, nan_TW@latin UTF-8, nb_NO ISO-8859-1, nb_NO.UTF-8 UTF-8, nds_DE UTF-8, nds_NL UTF-8, ne_NP UTF-8, nl_AW UTF-8, nl_BE ISO-8859-1, nl_BE.UTF-8 UTF-8, nl_BE@euro ISO-8859-15, nl_NL ISO-8859-1, nl_NL.UTF-8 UTF-8, nl_NL@euro ISO-8859-15, nn_NO ISO-8859-1, nn_NO.UTF-8 UTF-8, nr_ZA UTF-8, nso_ZA UTF-8, oc_FR ISO-8859-1, oc_FR.UTF-8 UTF-8, om_ET UTF-8, om_KE ISO-8859-1, om_KE.UTF-8 UTF-8, or_IN UTF-8, pa_IN UTF-8, pa_PK UTF-8, pap_AN UTF-8, pl_PL ISO-8859-2, pl_PL.UTF-8 UTF-8, ps_AF UTF-8, pt_BR ISO-8859-1, pt_BR.UTF-8 UTF-8, pt_PT ISO-8859-1, pt_PT.UTF-8 UTF-8, pt_PT@euro ISO-8859-15, ro_RO ISO-8859-2, ro_RO.UTF-8 UTF-8, ru_RU ISO-8859-5, ru_RU.CP1251 CP1251, ru_RU.KOI8-R KOI8-R, ru_RU.UTF-8 UTF-8, ru_UA KOI8-U, ru_UA.UTF-8 UTF-8, rw_RW UTF-8, sa_IN UTF-8, sc_IT UTF-8, sd_IN UTF-8, sd_IN@devanagari UTF-8, se_NO UTF-8, shs_CA UTF-8, si_LK UTF-8, sid_ET UTF-8, sk_SK ISO-8859-2, sk_SK.UTF-8 UTF-8, sl_SI ISO-8859-2, sl_SI.UTF-8 UTF-8, so_DJ ISO-8859-1, so_DJ.UTF-8 UTF-8, so_ET UTF-8, so_KE ISO-8859-1, so_KE.UTF-8 UTF-8, so_SO ISO-8859-1, so_SO.UTF-8 UTF-8, sq_AL ISO-8859-1, sq_AL.UTF-8 UTF-8, sr_ME UTF-8, sr_RS UTF-8, sr_RS@latin UTF-8, ss_ZA UTF-8, st_ZA ISO-8859-1, st_ZA.UTF-8 UTF-8, sv_FI ISO-8859-1, sv_FI.UTF-8 UTF-8, sv_FI@euro ISO-8859-15, sv_SE ISO-8859-1, sv_SE.ISO-8859-15 ISO-8859-15, sv_SE.UTF-8 UTF-8, ta_IN UTF-8, te_IN UTF-8, tg_TJ KOI8-T, tg_TJ.UTF-8 UTF-8, th_TH TIS-620, th_TH.UTF-8 UTF-8, ti_ER UTF-8, ti_ET UTF-8, tig_ER UTF-8, tk_TM UTF-8, tl_PH ISO-8859-1, tl_PH.UTF-8 UTF-8, tn_ZA UTF-8, tr_CY ISO-8859-9, tr_CY.UTF-8 UTF-8, tr_TR ISO-8859-9, tr_TR.UTF-8 UTF-8, ts_ZA UTF-8, tt_RU.UTF-8 UTF-8, tt_RU@iqtelif.UTF-8 UTF-8, ug_CN UTF-8, uk_UA KOI8-U, uk_UA.UTF-8 UTF-8, ur_PK UTF-8, uz_UZ ISO-8859-1, uz_UZ.UTF-8 UTF-8, uz_UZ@cyrillic UTF-8, ve_ZA UTF-8, vi_VN UTF-8, vi_VN.TCVN TCVN5712-1, wa_BE ISO-8859-1, wa_BE.UTF-8 UTF-8, wa_BE@euro ISO-8859-15, wo_SN UTF-8, xh_ZA ISO-8859-1, xh_ZA.UTF-8 UTF-8, yi_US CP1255, yi_US.UTF-8 UTF-8, yo_NG UTF-8, zh_CN GB2312, zh_CN.GB18030 GB18030, zh_CN.GBK GBK, zh_CN.UTF-8 UTF-8, zh_HK BIG5-HKSCS, zh_HK.UTF-8 UTF-8, zh_SG GB2312, zh_SG.GBK GBK, zh_SG.UTF-8 UTF-8, zh_TW BIG5, zh_TW.EUC-TW EUC-TW, zh_TW.UTF-8 UTF-8, zu_ZA ISO-8859-1, zu_ZA.UTF-8 UTF-8
+locales        locales/locales_to_be_generated multiselect     en_US.UTF-8 UTF-8
+# Keyboard model:
+# Choices: A4Tech KB-21, A4Tech KBS-8, A4Tech Wireless Desktop RFKB-23, Acer AirKey V, Acer C300, Acer Ferrari 4000, Acer Laptop, ACPI Standard, Advance Scorpius KI, Amiga, Apple, Apple Laptop, Asus Laptop, Atari TT, Azona RF2300 wireless Internet Keyboard, BenQ X-Touch, BenQ X-Touch 730, BenQ X-Touch 800, Brother Internet Keyboard, BTC 5090, BTC 5113RF Multimedia, BTC 5126T, BTC 6301URF, BTC 9000, BTC 9000A, BTC 9001AH, BTC 9019U, BTC 9116U Mini Wireless Internet and Gaming, Cherry Blue Line CyBo@rd, Cherry Blue Line CyBo@rd (alternate option), Cherry B.UNLIMITED, Cherry CyBo@rd USB-Hub, Cherry CyMotion Expert, Cherry CyMotion Master Linux, Cherry CyMotion Master XPress, Chicony Internet Keyboard, Chicony KB-9885, Chicony KU-0108, Chicony KU-0420, Classmate PC, Compaq Easy Access Keyboard, Compaq Internet Keyboard (13 keys), Compaq Internet Keyboard (18 keys), Compaq Internet Keyboard (7 keys), Compaq iPaq Keyboard, Creative Desktop Wireless 7000, Dell, Dell 101-key PC, Dell Laptop/notebook Inspiron 6xxx/8xxx, Dell Laptop/notebook Precision M series, Dell Latitude series laptop, Dell Precision M65, Dell SK-8125, Dell SK-8135, Dell USB Multimedia Keyboard, Dexxa Wireless Desktop Keyboard, Diamond 9801 / 9802 series, DTK2000, Ennyah DKB-1008, Evdev-managed keyboard, Everex STEPnote, FL90, Fujitsu-Siemens Computers AMILO laptop, Generic 101-key PC, Generic 102-key (Intl) PC, Generic 104-key PC, Generic 105-key (Intl) PC, Genius Comfy KB-12e, Genius Comfy KB-16M / Genius MM Keyboard KWD-910, Genius Comfy KB-21e-Scroll, Genius KB-19e NB, Genius KKB-2050HS, Gyration, Happy Hacking Keyboard, Happy Hacking Keyboard for Mac, Hewlett-Packard Internet Keyboard, Hewlett-Packard Mini 110 Notebook, Hewlett-Packard nx9020, Hewlett-Packard Omnibook 500 FA, Hewlett-Packard Omnibook 5xx, Hewlett-Packard Omnibook 6000/6100, Hewlett-Packard Omnibook XE3 GC, Hewlett-Packard Omnibook XE3 GF, Hewlett-Packard Omnibook XT1000, Hewlett-Packard Pavilion dv5, Hewlett-Packard Pavilion ZT11xx, Hewlett-Packard SK-250x Multimedia Keyboard, Honeywell Euroboard, IBM Rapid Access, IBM Rapid Access II, IBM Space Saver, IBM ThinkPad 560Z/600/600E/A22E, IBM ThinkPad R60/T60/R61/T61, IBM ThinkPad Z60m/Z60t/Z61m/Z61t, Keytronic FlexPro, Laptop/notebook Compaq (eg. Armada) Laptop Keyboard, Laptop/notebook Compaq (eg. Presario) Internet Keyboard, Laptop/notebook eMachines m68xx, Logitech Access Keyboard, Logitech Cordless Desktop, Logitech Cordless Desktop (alternate option), Logitech Cordless Desktop EX110, Logitech Cordless Desktop iTouch, Logitech Cordless Desktop LX-300, Logitech Cordless Desktop Navigator, Logitech Cordless Desktop Optical, Logitech Cordless Desktop Pro (alternate option 2), Logitech Cordless Freedom/Desktop Navigator, Logitech diNovo Edge Keyboard, Logitech diNovo Keyboard, Logitech G15 extra keys via G15daemon, Logitech Generic Keyboard, Logitech Internet 350 Keyboard, Logitech Internet Keyboard, Logitech Internet Navigator Keyboard, Logitech iTouch, Logitech iTouch Cordless Keyboard (model Y-RB6), Logitech iTouch Internet Navigator Keyboard SE, Logitech iTouch Internet Navigator Keyboard SE (USB), Logitech Media Elite Keyboard, Logitech Ultra-X Cordless Media Desktop Keyboard, Logitech Ultra-X Keyboard, MacBook/MacBook Pro, MacBook/MacBook Pro (Intl), Macintosh, Macintosh Old, Memorex MX1998, Memorex MX2500 EZ-Access Keyboard, Memorex MX2750, Microsoft Comfort Curve Keyboard 2000, Microsoft Internet Keyboard, Microsoft Internet Keyboard Pro\, Swedish, Microsoft Natural, Microsoft Natural Keyboard Elite, Microsoft Natural Keyboard Pro OEM, Microsoft Natural Keyboard Pro / Microsoft Internet Keyboard Pro, Microsoft Natural Keyboard Pro USB / Microsoft Internet Keyboard Pro, Microsoft Natural Wireless Ergonomic Keyboard 7000, Microsoft Office Keyboard, Microsoft Wireless Multimedia Keyboard 1.0A, Northgate OmniKey 101, OLPC, Ortek MCK-800 MM/Internet keyboard, PC-98xx Series, Propeller Voyager (KTEZ-1000), QTronix Scorpius 98N+, Samsung SDM 4500P, Samsung SDM 4510P, SILVERCREST Multimedia Wireless Keyboard, SK-1300, SK-2500, SK-6200, SK-7100, Sun Type 4, Sun Type 5, Sun Type 5/6, Super Power Multimedia Keyboard, SVEN Ergonomic 2500, SVEN Slim 303, Symplon PaceBook (tablet PC), Targa Visionary 811, Toshiba Satellite S3000, Trust Direct Access Keyboard, Trust Slimline, Trust Wireless Keyboard Classic, TypeMatrix EZ-Reach 2020, TypeMatrix EZ-Reach 2030 PS2, TypeMatrix EZ-Reach 2030 USB, TypeMatrix EZ-Reach 2030 USB (102/105:EU mode), TypeMatrix EZ-Reach 2030 USB (106:JP mode), Unitek KB-1925, ViewSonic KU-306 Internet Keyboard, Winbook Model XP5, Yahoo! Internet Keyboard
+keyboard-configuration keyboard-configuration/model    select  Generic 105-key (Intl) PC
+# Display manager must be restarted manually
+libpam0g       libpam0g/xdm-needs-restart      error   
+# Should man and mandb be installed 'setuid man'?
+man-db man-db/install-setuid   boolean false
+# Size of AFS cache in kB:
+openafs-client openafs-client/cachesize        string  500000
+# Failure restarting some services for GNU libc upgrade
+libc6  glibc/restart-failed    error   
+# Use fakestat to avoid hangs when listing /afs?
+openafs-client openafs-client/fakestat boolean true
+# DB server host names for your home cell:
+openafs-client openafs-client/cell-info        string  
+# Line by line differences between versions
+ucf    ucf/show_diff   note    
+# Apply configuration changes to disk device IDs?
+linux-base     linux-base/disk-id-convert-plan boolean true
+# Use dash as the default system shell (/bin/sh)?
+dash   dash/sh boolean true
+# Reboot needed after this upgrade
+udev   udev/reboot_needed      error   
+# for internal use; can be preseeded
+d-i    debian-installer/country        string  US
+# Abort kernel removal?
+linux-image-2.6.32-5-amd64     linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64 boolean true
+# Activate daily run of rkhunter?
+rkhunter       rkhunter/cron_daily_run boolean true
+# Activate weekly update of rkhunter's databases?
+rkhunter       rkhunter/cron_db_update boolean true
+# for internal use
+keyboard-configuration keyboard-configuration/layoutcode       string  us
+# GRUB install devices:
+# Choices: 
+grub-pc        grub-pc/install_devices_disks_changed   multiselect     
+# Linux default command line:
+grub-pc        grub2/linux_cmdline_default     string  quiet
+# Failure restarting some services for PAM upgrade
+libpam0g       libpam0g/restart-failed error   
+# Look up AFS cells in DNS?
+openafs-client openafs-client/afsdb    boolean true
+# Disable challenge-response authentication?
+openssh-server ssh/disable_cr_auth     boolean false
+# Chainload from menu.lst?
+grub-pc        grub-pc/chainload_from_menu.lst boolean true
+# Geographic area:
+# Choices: Africa, America, Antarctica, Australia, Arctic, Asia, Atlantic, Europe, Indian, Pacific, SystemV, US, Etc
+tzdata tzdata/Areas    select  Etc
+# for internal use
+console-setup  console-setup/store_defaults_in_debconf_db      boolean true
+# IP-addresses to listen on for incoming SMTP connections:
+exim4-config   exim4/dc_local_interfaces       string  127.0.0.1 ; ::1
+# Should apt-listchanges skip changes that have already been seen?
+apt-listchanges        apt-listchanges/save-seen       boolean true
+# Remote SMTP port number:
+ssmtp  ssmtp/port      string  25
+# The running kernel has incompatible options enabled
+udev   udev/sysfs_deprecated_incompatibility   error   
+# Name of your mailhub:
+ssmtp  ssmtp/mailhub   string  mail
+# Font size:
+# Choices: 
+console-setup  console-setup/fontsize-fb47     select  16
+# Should debsums files be generated automatically by apt-get?
+debsums        debsums/apt-autogen     boolean true
+# for internal use
+keyboard-configuration keyboard-configuration/store_defaults_in_debconf_db     boolean true
+# Add locations of default Kerberos servers to /etc/krb5.conf?
+krb5-config    krb5-config/add_servers boolean false
+# Required firmware files may be missing
+linux-image-2.6.32-5-amd64     linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64     note    
+# Time zone:
+# Choices: Azores, Bermuda, Canary, Cape Verde, Faroe, Jan Mayen, Madeira, Reykjavik, South Georgia, St. Helena, Stanley
+tzdata tzdata/Zones/Atlantic   select  
+# The desktop environment to install when the desktop task is selected
+# Choices: gnome, kde, xfce
+tasksel        tasksel/desktop multiselect     gnome
+# Allow override of From: line in email header?
+ssmtp  ssmtp/fromoverride      boolean false
+# Keep number of DNS-queries minimal (Dial-on-Demand)?
+exim4-config   exim4/dc_minimaldns     boolean false
+# Administrative server for your Kerberos realm:
+krb5-config    krb5-config/admin_server        string  
+# Finish conversion to GRUB 2 now?
+grub-pc        grub-pc/mixed_legacy_and_grub2  boolean true
+# What do you want to do about modified configuration file ?
+# Choices: install the package maintainer's version, keep the local version currently installed, show the differences between the versions, show a side-by-side difference between the versions, show a 3-way difference between available versions, do a 3-way merge between available versions (experimental), start a new shell to examine the situation
+ucf    ucf/changeprompt_threeway       select  keep_current
+# xscreensaver and xlockmore must be restarted before upgrading
+libpam-modules libpam-modules/disable-screensaver      error   
+# for internal use
+keyboard-configuration keyboard-configuration/optionscode      string  
+# for internal use
+console-setup  console-setup/fontsize  string  16
+# No PAM profiles have been selected.
+libpam-runtime libpam-runtime/no_profiles_chosen       error   
+# Time zone:
+# Choices: Antananarivo, Chagos, Christmas, Cocos, Comoro, Kerguelen, Mahe, Maldives, Mauritius, Mayotte, Reunion
+tzdata tzdata/Zones/Indian     select